首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
The region around Wadakkancheri, Trichur District, Kerala is known for microseismic activity, since 1989. Studies, subsequent to 2nd December 1994 (M =4.3) earthquake, identified a south dipping active fault (Desamangalam Fault) that may have influenced the course of Bharathapuzha River. The ongoing seismicity is concentrated on southeast of Wadakkancheri and the present study concentrated further south of Desamangalam Fault. The present study identifies the northwestern continuity of NW–SE trending Periyar lineament, which appears to have been segmented in the area. To identify the subtle landform modifications induced by ongoing tectonic adjustments, we focused on morphometric analysis. The NW–SE trending lineaments appear to be controlling the sinuosity of smaller rivers in the area, and most of the elongated drainage basins follow the same trend. The anomalies shown in conventional morphometric parameters, used for defining basins, are also closely associated with the NW–SE trending Periyar lineament/s. A number of brittle faults that appear to have been moved are consistent with the present stress regime and these are identified along the NW–SE trending lineaments. The current seismic activities also coincide with the zone of these lineaments as well as at the southeastern end of Periyar lineament. These observations suggest that the NW–SE trending Periyar lineaments/faults may be responding to the present N–S trending compressional stress regime and reflected as the subtle readjustments of the drainage configuration in the area.  相似文献   

2.
At 08:02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya'an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43°. It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone (13-19 km) of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.  相似文献   

3.
Earthquakes in Kenya are common along the Kenya Rift Valley because of the slow divergent movement of the rift and hydrothermal processes in the geothermal fields. This implies slow but continuous radiation of seismic energy, which relieves stress in the subsurface rocks. On the contrary, the NW-SE trending rift/fault zones such as the Aswa-Nyangia fault zone and the Muglad-Anza-Lamu rift zone are the likely sites of major earthquakes in Kenya and the East African region. These rift/fault zones have been the sites of a number of strong earthquakes in the past such as the M w = 7.2 southern Sudan earthquake of 20 May 1990 and aftershocks of M w = 6.5 and 7.1 on 24 May 1990, the 1937 M s = 6.1 earthquake north of Lake Turkana close to the Kenya-Ethiopian border, and the 1913 M s = 6.0 Turkana earthquake, among others. Source parameters of the 20 May 1990 southern Sudan earthquake show that this earthquake consists of only one event on a fault having strike, dip, and rake of 315°, 84°, and ?3°. The fault plane is characterized by a left-lateral strike slip fault mechanism. The focal depth for this earthquake is 12.1 km, seismic moment M o = 7.65 × 1019 Nm, and moment magnitude, M w = 7.19 (?7.2). The fault rupture started 15 s earlier and lasted for 17 s along a fault plane having dimensions of ?60 km × 40 km. The average fault dislocation is 1.1 m, and the stress drop, , is 1.63 MPa. The distribution of historical earthquakes (M w ≥ 5) from southern Sudan through central Kenya generally shows a NW-SE alignment of epicenters. On a local scale in Kenya, the NW–SE alignment of epicenters is characterized by earthquakes of local magnitude M l ≤ 4.0, except the 1928 Subukia earthquake (M s = 6.9) in central Kenya. This NW–SE alignment of epicenters is consistent with the trend of the Aswa-Nyangia Fault Zone, from southern Sudan through central Kenya and further southwards into the Indian Ocean. We therefore conclude that the NW–SE trending rift/fault zones are sites of strong earthquakes likely to pose the greatest earthquake hazard in Kenya and the East African region in general.  相似文献   

4.
An integrated interpretation of seismicity, fault plane solutions and deep seismic reflection data suggests that the NE–SW to NW–SE trending Rhone–Simplon fault zone and the gently S-dipping basal Penninic thrust separate fundamentally different stress regimes in the western Swiss Alps. North of the Rhone-Simplon fault zone, strike-slip earthquakes on steep-dipping faults within the Helvetic nappes are a consequence of regional NW–SE compression and NE–SW extension. To the south, vertical maximum stress and N–S extension are responsible for normal mechanism earthquakes that occur entirely within the Penninic nappes above the basal Penninic thrust. Such normal faulting likely results from extension associated with southward movements (collapse) of the Penninic nappes and/or continued uplift and relative northward displacements of the underlying Alpine massifs. Geological mapping and fission-track dating suggest that the two distinct stress regimes have controlled tectonism in the western Swiss Alps since at least the Neogene.  相似文献   

5.
2014年10—12月期间,云南景谷接连发生了Ms6.6、Ms5.8、Ms5.9三次中-强地震。为确定地震的地质构造成因,在地表调查的基础上,综合该区的地质构造情况、烈度与余震分布、震源机制解等资料,确定此次震群活动的宏观震中位于永平盆地东南侧山地,发震断层为地质与地貌表现不显著的NW向右旋走滑断层。此次震群活动及余震迁移过程指示,由于断层斜接部位岩桥的临时阻碍,Ms6.6地震破裂在向南东扩展过程中发生短暂停滞,突破障碍后进一步引发了Ms5.8和Ms5.9地震,这符合震源破裂沿NW向发震断裂分段破裂的行为。区域活动断裂的遥感解译结果发现,发震断层位置恰好处于NW向右旋走滑的茶房断裂与普文断裂之间,区域上属于该断裂带的不连贯部位,指示此次中-强震群活动应该是茶房-普文断裂带贯通过程的构造活动表现。结合思茅地块的历史地震资料发现,思茅地块地震活动多以小于等于6.8级为主,发震构造多为NW向断裂。指示在现今构造应力场作用下,该区NW向断裂的活动性相对NE向断裂更加显著,属于该区主要控震构造,应在今后的地震地质工作中给予更多关注。  相似文献   

6.
On April 20 th, 2013, an earthquake of magnitude MW 6.6 occurred at Lushan of Sichuan on the southern segment of the Longmenshan fault zone, with no typical coseismic surface rupture. This work plotted an isoseismal map of the earthquake after repositioning over 400 post–earthquake macro–damage survey points from peak ground acceleration(PGA) data recorded by the Sichuan Digital Strong Earthquake Network. This map indicates that the Lushan earthquake has a damage intensity of IX on the Liedu scale, and that the meizoseismal area displays an oblate ellipsoid shape, with its longitudinal axis in the NE direction. No obvious directivity was detected. Furthermore, the repositioning results of 3323 early aftershocks, seismic reflection profiles and focal mechanism solutions suggests that the major seismogenic structure of the earthquake was the Dayi Fault, which partly defines the eastern Mengshan Mountain. This earthquake resulted from the thrusting of the Dayi Fault, and caused shortening of the southern segment of the Longmenshan in the NW–SE direction. Coseismal rupture was also produced in the deep of the Xinkaidian Fault. Based on the above seismogenic model and the presentation of coseismic surface deformation, it is speculated that there is a risk of more major earthquakes occurring in this region.  相似文献   

7.
汶川地震在地表形成了北东向与北西向两个方向的地表破裂带,余震分布也清晰地显示沿着小鱼洞断裂存在一条北西向小震密集条带。为了研究北西向小鱼洞断裂在汶川地震破裂过程中的作用,在已有的地表破裂数据和认识的基础上,结合汶川地震前小震资料和余震资料,完善了汶川地震震源构造模型。分别计算了以北川—映秀断裂西南的虹口段(BY1)与小鱼洞断裂作为初始破裂段所产生的库仑静应力变化量(ΔCFS)分布图像。结果显示,以北川—映秀断裂虹口段(BY1)做为起始破裂段,虽然小鱼洞断裂西北段(XYD2)的局部地段处于应力触发区,但在出现地表破裂的小鱼洞断裂东南段(XYD1)却处于1.5 bar的应力抑制区,同时随着北川—映秀断裂向北东方向的进一步破裂,小鱼洞断裂仍处于应力抑制区,并且范围有所扩大。如果这样,在汶川地震过程中,小鱼洞断裂应该是稳定的,不可能产生地表破裂带及小震密集条带;以小鱼洞断裂作为起始破裂段,北川—映秀断裂BY1段的大部分区段处于1.0~1.5 bar的应力触发区,不但如此,小鱼洞断裂对彭灌断裂也有触发作用。基于以上结果,认为汶川地震破裂过程是以北西向小鱼洞断裂为起始破裂段,该断裂的破裂触发了北川—映秀断裂和彭灌断裂,并导致北川—映秀断裂向北东方向发生级联破裂。  相似文献   

8.
芦山地震发震构造及其与汶川地震关系讨论   总被引:14,自引:0,他引:14  
芦山地震发生在巴彦喀拉块体与华南块体之间龙门山推覆构造带南段。野外考察表明,芦山地震在震中区没有形成具有构造地质意义的地震地表破裂带,仅在各山前陡坡地带出现平行于山麓陡坡的张性地裂缝、山地基岩崩塌、滑坡等边坡震动失稳现象和震动引起的砂土液化现象。重新定位的芦山地震余震分布、震源机制解和地表构造地质等分析表明,芦山地震的发震断层为一条现今尚未出露地表、其上断点仍埋藏在地下9 km以下地壳中的一条盲逆断层,走向212°,倾向NW,倾角38°±2°,上断点以上至地表的构造变形符合断层扩展背斜模型。根据汶川地震和芦山地震的余震空间分布、地震破裂过程、深浅构造关系等差异反映出它们是分别发生在龙门山推覆构造带中段和南段的两次独立地震破裂事件。  相似文献   

9.
据中国地震台网测定,2021年5月21日21时48分在云南省大理州漾濞县发生MS6.4地震,及时查明此次地震的发震构造及震源破裂特征,可为认识该区孕震条件和判别未来强震危险性提供关键依据。采用双差定位方法对漾濞地震序列进行重新定位,得到3863次地震事件的精确震源位置。结果显示:漾濞地震序列整体呈北西—南东向分布,长约25 km;整体走向135°;MS6.4主震震中位置为25.688°N,99.877°E;震源深度约9.6 km。综合地震序列深度剖面和震源机制解结果可知,发震断层应为北西走向、整体向西南方向陡倾的右旋走滑断层,倾角具有自北西向南东逐渐变缓的趋势。进一步分析地震序列的时空演化过程发现,该地震具有典型的"前震-主震-余震型"地震序列活动特点,其破裂过程主要包括3个阶段。破裂成核阶段:首先在发震断层10~12 km深度处相对脆弱部位产生小尺度破裂,之后失稳加速破裂,发生MS5.6地震;主震破裂阶段:在构造应力场持续加载和周围小尺度破裂的共同影响下,促使浅部较高强度断层闭锁区破裂,形成MS6.4主震;尾端拉张破裂阶段:主震破裂向东南扩展过程中,在东南端形成与之呈马尾状斜交的、具有正断性质的次级破裂,并产生MS5.2余震。而且此次地震还在源区北东侧触发了北北东向的左旋走滑破裂。综合分析认为,漾濞地震是兰坪-思茅地块内部北西向草坪断裂在近南北向区域应力挤压作用下发生右旋走滑运动的结果,具有明显的新生断裂特征。近年来兰坪-思茅地块内部一系列中强地震的发生表明,青藏高原物质向东南持续挤出的过程中,遇到该地块的阻挡,正在导致地块内部早期断层贯通形成新的活动断裂。因此,川滇地块西南边界带上或相邻地块内部老断层的复活和新生断裂的产生是区域中强地震危险性分析评价中值得关注的重要课题,同时建议需重视未来该区中强地震进一步向东南和向北的迁移或扩展的可能性。   相似文献   

10.
The Gulf of Patti and its onshore sector represent one of the most seismically active regions of the Italian Peninsula. Over the period 1984–2014, about 1800 earthquakes with small-to-moderate magnitude and a maximum hypocentral depth of 40 km occurred in this area. Historical catalogues reveal that the same area was affected by several strong earthquakes such as the Mw = 6.1 event in April 1978 and the Mw = 6.2 one in March 1786 which have caused severe damages in the surrounding localities. The main seismotectonic feature affecting this area is represented by a NNW–SSE trending right-lateral strike-slip fault system called “Aeolian–Tindari–Letojanni” (ATLFS) which has been interpreted as a lithospheric transfer zone extending from the Aeolian Islands to the Ionian coast of Sicily. Although the large-scale role of the ATLFS is widely accepted, several issues about its structural architecture (i.e. distribution, attitude and slip of fault segments) and the active deformation pattern are poorly constrained, particularly in the offshore. An integrated analysis of field structural geology with marine geophysical and seismological data has allowed to better understand the structural fabric of the ATLFS which, in the study area, is expressed by two major NW–SE trending, en-echelon arranged fault segments. Minor NNE–SSW oriented extensional structures mainly occur in the overlap region between major faults, forming a dilatational stepover. Most faults display evidence of active deformation and appear to control the main morphobathymetric features. This aspect, together with diffused continental slope instability, must be considered for the revaluation of the seismic and geomorphological hazard of this sector of southern Tyrrhenian Sea.  相似文献   

11.
The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.  相似文献   

12.
The field investigations in the epicentral area of the 1994 Wadakkancheri (Desamangalam), Kerala, earthquake (M 4.3) indicate subtle, but clearly recognizable expressions of geologically recent fault zone, consisting of fracture sets showing brittle displacement and a gouge zone. The fracture zone confines to the crystalline basement, and is spatially coincident with the elongation of the isoseismals of the 1994 mainshock and a 10-km-long WNW-ESE trending topographic lineament. The preliminary results from the electron spin resonance (ESR) dating on the quartz grains from the fault gouge indicate that the last major faulting in this site occurred 430 ± 43 ka ago. The experiments on different grain sizes of quartz from the gouge showed consistent decrease in age to a plateau of low values, indicating that ESR signals in finer grains were completely zeroed at the time of faulting due to frictional heat. The results show a relatively young age for displacement on the fault that occurs within a Precambrian shear zone. Discrete reactivated faults in such areas may be characterized by low degree of activity, but considering the ESR age of the last significant faulting event, the structure at Desamangalam may be categorized as a potentially active fault capable of generating moderate earthquakes, separated by very long periods of quiescence.  相似文献   

13.
The seismicity of Calabria is among the strongest in the whole of the Mediterranean, but is now well known on its Ionian side. Palaeoseismological investigations in eastern Calabria and archival research have tried to shed light on earthquake recurrence and seismogenetic source geometry. Trench investigation across the Lakes fault (Sila massif) shows this fault to be definitively responsible for the Mw = 6.7, 1638 earthquake, and provides a well‐constrained age range for its penultimate event (early 7th century AD). On the other hand, after research in local and national archives, another previously unknown relevant historical earthquake has been discovered (1744, Mw = 6.2), which struck an area conterminous to the SE tip of the Lakes fault. We hypothesize a NW–SE active Sila fault system that accommodates regional ~N–S extension through normal‐to‐sinistral segments, each one capable of generating earthquakes with magnitude in the range of 6.2–6.7. Since 1638, this system ruptured almost entirely from NW towards SE (1638–1744–1832), with the exception of the northwestern segment, the ‘silent’ Cecita fault.  相似文献   

14.
唐山地震区域构造背景和发震模式的讨论   总被引:10,自引:0,他引:10       下载免费PDF全文
1976年7月28日3点42分在我国河北省唐山地区发生了7.8级强烈地震。地震的发生,是有它的区域构造背景和震区的构造条件的。深入研究这个问题,对认识地震的形成、孕育和发生是十分有意义的。唐山地震震中与深大断裂没有表现直接的联系,而是分布在不引入注目的北东向断裂上。其控制因素我们认为是包围震区的边界断裂起了重要作用。边界断裂的存在使被围限的北东向断裂得到了暂时的平衡,形成相对“闭锁”区段。当区域应力场急剧变化时,“闭锁”就被突破,产生大地震。  相似文献   

15.
Cultrera  F.  Barreca  G.  Burrato  P.  Ferranti  L.  Monaco  C.  Passaro  S.  Pepe  F.  Scarf&#;  L. 《Natural Hazards》2016,86(2):253-272

The Gulf of Patti and its onshore sector represent one of the most seismically active regions of the Italian Peninsula. Over the period 1984–2014, about 1800 earthquakes with small-to-moderate magnitude and a maximum hypocentral depth of 40 km occurred in this area. Historical catalogues reveal that the same area was affected by several strong earthquakes such as the Mw = 6.1 event in April 1978 and the Mw = 6.2 one in March 1786 which have caused severe damages in the surrounding localities. The main seismotectonic feature affecting this area is represented by a NNW–SSE trending right-lateral strike-slip fault system called “Aeolian–Tindari–Letojanni” (ATLFS) which has been interpreted as a lithospheric transfer zone extending from the Aeolian Islands to the Ionian coast of Sicily. Although the large-scale role of the ATLFS is widely accepted, several issues about its structural architecture (i.e. distribution, attitude and slip of fault segments) and the active deformation pattern are poorly constrained, particularly in the offshore. An integrated analysis of field structural geology with marine geophysical and seismological data has allowed to better understand the structural fabric of the ATLFS which, in the study area, is expressed by two major NW–SE trending, en-echelon arranged fault segments. Minor NNE–SSW oriented extensional structures mainly occur in the overlap region between major faults, forming a dilatational stepover. Most faults display evidence of active deformation and appear to control the main morphobathymetric features. This aspect, together with diffused continental slope instability, must be considered for the revaluation of the seismic and geomorphological hazard of this sector of southern Tyrrhenian Sea.

  相似文献   

16.
The 1515 M7? Yongsheng earthquake is the strongest earthquake historically in northwest Yunnan. However, its time, magnitude and the seismogenic fault have long been a topic of dispute. In order to accurately define those problems, a 1:50000 active tectonic mapping was carried out along the northern segment of the Chenghai–Binchuan fault zone. The result shows that there is an at least 25 km–long surface rupture and a series of seismic landslides distributed along the Jinguan fault and the Chenghai fault. Radiocarbon dating of the ~(14) C samples indicates that the surface rupture should be a part of the deformation zone caused by the Yongsheng earthquake in the year 1515. The distribution characteristics of this surface rupture indicate that the macroscopic epicenter of the 1515 Yongsheng earthquake may be located near Hongshiya, and the seismogenic fault of this earthquake is the Jinguan–Chenghai fault, the northern part of the Chenghai–Binchuan fault zone. Striations on the surface rupture show that the latest motion of the fault is normal faulting. The maximum co–seismic vertical displacement can be 3.8 m, according to the empirical formula for the fault displacement and moment magnitude relationship, the moment magnitude of the Yongsheng earthquake was Mw 7.3–7.4. Furthermore, combining published age data with the ~(14) C data in this paper reveals that at least four large earthquakes of similar size to the 1515 Yongsheng earthquake, have taken place across the northern segment of the Chenghai–Binchuan fault zone since 17190±50 yr. BP. The in–situ recurrence interval of Mw 7.3–7.4 characteristic earthquakes in Yongsheng along this fault zone is possibly on the order of 6 ka.  相似文献   

17.
海城地震地质构造背景与发震构造的探讨   总被引:2,自引:0,他引:2       下载免费PDF全文
前言 一九七五年二月四日,我国辽宁省海城县发生了一次7.3级强烈地震。由于这次地震预报和预防工作的成功极大地减少了伤亡损失,取得了预报和预防破坏性地震的一些很有意义的经验。它充分显示了经过无产阶级文化大革命之后,我国地震工作在毛主席革命路线指引下取得的新成就。 这次海城地震是我国东北有记载以来第一个七级以上的浅源地震。在宏观调查的基础上,我们先后两次对震区及其邻近地区进行了地震地质考察。  相似文献   

18.
The Andaman-Sumatra subduction zone is seismically one of the most active and complex subduction zones that produced the 26 December 2004 mega thrust earthquake (Mw 9.3) and large number of aftershocks. About 8,000 earthquakes, including more than 3,000 aftershocks (M ≥ 4.5) of the 2004 earthquake, recorded during the period 1964–2007, are relocated by the EHB method. We have analysed this large data set to map fractal correlation dimension (Dc) and frequency-magnitude relation (b-value) characteristics of the seismogenic structures of this ~3,000-km-long mega thrust subduction zone in south-east Asia. The maps revealed the seismic characteristics of the Andaman-Sumatra-Java trenches, West Andaman fault (WAF), Andaman Sea Ridge (ASR), Sumatra and Java fault systems. Prominent N–S to NW–SE to E–W trending fractal dimension contours all along the subduction zone with Dc between 0.6 and 1.4 indicate that the epicentres mostly follow linear features of the major seismogenic structures. Within these major contours, several pockets of close contours with Dc ~ 0.2 to 0.6 are identified as zones of epicentre clusters and are inferred to the fault intersections as well as asperity zones along the fault systems in the fore arc. A spatial variation in the b-value (1.2–1.5) is also observed along the subduction zone with several pockets of lower b-values (1.2–1.3). The smaller b-value zones are corroborated with lower Dc (0.5–0.9), implying a positive correlation. These zones are identified to be the zones of more stress or asperity where rupture nucleation of intermediate to strong magnitude earthquakes occurred.  相似文献   

19.
《Geodinamica Acta》2003,16(2-6):131-147
Combining fieldwork and surface data, we have reconstructed the Cenozoic structural and tectonic evolution of the Northern Bresse. Analysis of drainage network geometry allowed to detect three major fault zones trending NE–SW, E–W and NW–SE, and smooth folds with NNE trending axes, all corroborated with shallow well data in the graben and fieldwork on edges. Cenozoic paleostress succession was determined through fault slip and calcite twin inversions, taking into account data of relative chronology. A N–S major compression, attributed to the Pyrenean orogenesis, has activated strike-slip faults trending NNE along the western edge and NE–SW in the graben. After a transitional minor E–W trending extension, the Oligocene WNW extension has structured the graben by a collapse along NNE to NE–SW normal faults. A local NNW extension closes this phase. The Alpine collision has led to an ENE compression at Early Miocene. The following WNW trending major compression has generated shallow deformation in Bresse, but no deformation along the western edge. The calculation of potential reactivation of pre-existing faults enables to propose a structural sketch map for this event, with a NE–SW trending transfer fault zone, inactivity of the NNE edge faults, and possibly large wavelength folding, which could explain the deposit agency and repartition of Miocene to Quaternary deformation.  相似文献   

20.
Spectral analysis of the digital data of the Bouguer anomaly of North India including Ganga basin suggest a four layer model with approximate depths of 140, 38, 16 and 7 km. They apparently represent lithosphere–asthenosphere boundary (LAB), Moho, lower crust, and maximum depth to the basement in foredeeps, respectively. The Airy’s root model of Moho from the topographic data and modeling of Bouguer anomaly constrained from the available seismic information suggest changes in the lithospheric and crustal thicknesses from ∼126–134 and ∼32–35 km under the Central Ganga basin to ∼132 and ∼38 km towards the south and 163 and ∼40 km towards the north, respectively. It has clearly brought out the lithospheric flexure and related crustal bulge under the Ganga basin due to the Himalaya. Airy’s root model and modeling along a profile (SE–NW) across the Indus basin and the Western Fold Belt (WFB), (Sibi Syntaxis, Pakistan) also suggest similar crustal bulge related to lithospheric flexure due to the WFB with crustal thickness of 33 km in the central part and 38 and 56 km towards the SE and the NW, respectively. It has also shown the high density lower crust and Bela ophiolite along the Chamman fault. The two flexures interact along the Western Syntaxis and Hazara seismic zone where several large/great earthquakes including 2005 Kashmir earthquake was reported.The residual Bouguer anomaly maps of the Indus and the Ganga basins have delineated several basement ridges whose interaction with the Himalaya and the WFB, respectively have caused seismic activity including some large/great earthquakes. Some significant ridges across the Indus basin are (i) Delhi–Lahore–Sargodha, (ii) Jaisalmer–Sibi Syntaxis which is highly seismogenic. and (iii) Kachchh–Karachi arc–Kirthar thrust leading to Sibi Syntaxis. Most of the basement ridges of the Ganga basin are oriented NE–SW that are as follows (i) Jaisalmer–Ganganagar and Jodhpur–Chandigarh ridges across the Ganga basin intersect Himalaya in the Kangra reentrant where the great Kangra earthquake of 1905 was located. (ii) The Aravalli Delhi Mobile Belt (ADMB) and its margin faults extend to the Western Himalayan front via Delhi where it interacts with the Delhi–Lahore ridge and further north with the Himalayan front causing seismic activity. (iii) The Shahjahanpur and Faizabad ridges strike the Himalayan front in Central Nepal that do not show any enhanced seismicity which may be due to their being parts of the Bundelkhand craton as simple basement highs. (iv) The west and the east Patna faults are parts of transcontinental lineaments, such as Narmada–Son lineament. (v) The Munghyr–Saharsa ridge is fault controlled and interacts with the Himalayan front in the Eastern Nepal where Bihar–Nepal earthquakes of 1934 has been reported. Some of these faults/lineaments of the Indian continent find reflection in seismogenic lineaments of Himalaya like Everest, Arun, Kanchenjunga lineaments. A set of NW–SE oriented gravity highs along the Himalayan front and the Ganga and the Indus basins represents the folding of the basement due to compression as anticlines caused by collision of the Indian and the Asian plates. This study has also delineated several depressions like Saharanpur, Patna, and Purnia depressions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号