三峡地区上地壳结构的远震虚震源反射地震成像

远震虚震源反射成像方法利用远震初至波在台网之下地表与地下界面间形成的反射波(PPdp震相)波形资料进行台网地区地震反射结构研究.此方法先用台网各台站的平均初至波形求取震源信号,再用该震源信号与各道地震记录作反褶积从而取得反射剖面.本文介绍了远震虚震源反射成像的基本原理和实现步骤,并以三峡地区的观测资料为例,得到三峡库首区上地壳的反射地震剖面.成像剖面中解释出的四川盆地和秭归盆地的底界面位置和形态与地表地质观测和大地构造背景吻合.为验证虚震源成像的能力,本文使用弹性波正演模拟合成地震数据,经过处理实际资料一样的步骤获得虚震源成像结果.正演模拟表明,叠加多个远震的反射地震剖面可以有效地改善成像的信噪比和连续性;虚震源成像需要选择特定的震源频率范围,以减轻高频噪音以及低频造成的成像问题.在研究上地壳结构时,建议在不适合主动源采集和缺乏低频信号的地区尝试远震虚震源方法.     

多波高斯束叠前深度偏移速度分析(英文)

多分量地震资料叠前深度偏移技术可以对地下复杂地质构造进行更准确的成像,精确成像的前提是获取准确的纵横波偏移速度。本文采用高斯束偏移方法对多波地震数据进行偏移速度分析,首先分别给出纵波和转换波共偏移距域高斯束叠前深度偏移方法原理,在此基础上抽取纵波和转换波偏移距域共成像点道集;然后根据共成像点道集拉平准则,分别对纵波和横波速度进行更新;当两种波成像深度不一致时,对纵波和转换波成像剖面进行深度匹配,完成高精度的纵横波偏移速度分析。模型数据和实际资料试算表明,该方法是一种有效的多波偏移速度分析方法。     

基于广义的炮偏移方法实现地表多次波和一次波联合成像

多次波是地下反射层的多次波反射,也蕴含了地下反射界面的信息,因此并不是绝对地只能被当做噪音来处理.为实现对地下构造的准确成像,本文基于广义概念上的炮偏移成像算法,对常规一次波偏移方法从用于向下延拓的上、下行场以及成像条件方面进行了改进,将同时含有表层多次波的炮记录与脉冲震源之和作为下行延拓的震源波场,将同时含有表层多次...     

利用走时进行浅层反射成像及其应用

利用反射走时提出厂工程物探中浅层反射成像的新方法在局部范围内可将地层各界面视为平面,求取界面深度、速度诸参数,整个剖面的成像只需反复在局部范围内求解数值模拟表明方法具有精度高、收敛速度快等特点对清水江三板溪水电站坝址两个剖面的实际资料处理结果与现有资料吻合,表明该方法具有一定的应用前景     

多次波分阶逆时偏移成像

本文深入分析了多次波逆时偏移的成像原理和串扰假象产生机制,并提出了多次波分阶逆时偏移策略,即首先应用自由界面多次波衰减方法对原始炮集记录中的多次波进行剔除得到一次波记录,然后应用一次波记录预测获得各阶多次波记录,最后将各阶多次波记录分别进行逆时偏移成像.模型实验结果表明,多次波分阶逆时偏移其各阶多次波成像剖面均可对真实界面正确成像且其能够有效压制串扰假象,其中一阶多次波逆时偏移剖面的成像精度最高,其深层成像质量明显优于常规多次波逆时偏移.     

克希霍夫法VSP多波联合成像

VSP 转换波跟VSP 纵波或常规地面转换波相比,具有较高的分辨率和信噪比,但传统的VSP成像方法只利用了反射P波信息,而把转换波（反射S波、透射S波）以及透射P波当作影响成像质量的噪音.本文给出了一种VSP共炮点道集多分量地震资料克希霍夫法偏移成像的方法.本方法充分利用了多波（反射P波、反射S波、透射P波、透射S波）信息,根据转换点处四种波同时起跳,能量叠加最大的原理,从接收点分别用向绕射点延拓它们的能量,并将其叠加起来,求得的和最大的一点即反射点.通过模型试算和实际资料处理表明,此法成像精度高,信噪比高,且有利于改善剖面的频率特性.     

三维斜井XSP-CDP叠加成像

为了解决三维斜井井间地震数据成像问题,借鉴二维地面地震弯线及宽线处理思路,将三维井间地震成像问题转换成二维成像问题进行研究.利用三维逐段迭代方法对三维斜井井间地质模型进行正演模拟,计算上、下行反射波走时及反射点位置,通过对比正演记录与实际资料的特征,调整地质模型参数获取准确速度场.然后对波场分离后的共炮集数据进行反射波归位,得到共反射点道集数据.最后根据反射点的分布选择一条反射点分布最集中的剖面线,以一定的宽度将剖面线左右的反射点包裹起来;根据叠加宽度划分成大小相等的矩形面元,将面元内的共反射点数据投影到剖面线上进行二维叠加成像.通过模型测试,三维XSP-CDP叠加方法能有效反演地下结构特征,指导三维井间地震采集观测系统的设计并解决不共面斜井叠加成像问题.应用该方法对M地区实际资料进行成像研究,结果表明该方法可有效反演地下三维地质结构特征,为进一步数据处理提供依据.     

VSP上下行反射波联合成像方法研究

VSP资料上下行波场发育丰富.本文在分析VSP直达波、上行反射波、下行反射波传播路径及其照明范围的基础上,指出了常规VSP波动方程偏移方法缺陷,进而通过修改波场延拓方式,提出了上下行反射波联合成像方法,并在高频近似下分析了该方法的成像原理.该方法不需要进行VSP上下行反射波场分离,能够同时对VSP资料中的一次反射波、自由表面多次波、层间多次波进行成像,比常规成像剖面具有更宽的成像范围和更好的成像效果.该方法能够对下行一次反射波进行成像,从而可以实现常规偏移方法难以处理的高陡倾角构造成像.模拟资料和实际资料处理证明了本文方法的正确性.     

中国东南屯溪-温州宽角地震资料去广角效应成像

由于长排列广角地震采集中必定存在超临界角的广角反射信息,广角反射信息相对临界角内反射信息存在随偏移距变化的时移现象.本文研究了去广角效应下的走时反演成像,并将其应用到东南屯溪—温州的宽角地震资料.通过拾取中国东南屯溪—温州剖面宽角实际地震资料中P波垂直分量拾取到的反射P波走时,继而使用遗传反演方法进行处理,得到了该区丰乐、新安江、松阳、青田以及洞头五炮去广角效应与未考虑广角效应情况下的一维速度深度曲线,并对比了去广角效应前后的地壳结构界面形态.结果表明,广角效应去除前后影响主要体现在壳内层速度差异,地壳浅层界面深度的广角效应明显强于深层界面.     

双复杂条件下的波动方程叠前深度偏移

复杂地表条件下的地震勘探越来越被人们所关注.双复杂条件下的叠前深度偏移方法是解决复杂地表条件和复杂地质构造成像的有效手段."波场上延"法能实现由非水平观测界面开始的偏移过程,解决复杂地表对地下构造成像的影响.复杂理论模型的试算以及实际资料处理表明,"波场上延"方法较好地克服了起伏地形对地下构造成像的影响,取得了令人满意的效果,实现了波动方程基准面校正和深度成像的有机结合.     

WAVE FIELD EXTRAPOLATION TECHNIQUES FOR INHOMOGENEOUS MEDIA WHICH INCLUDE CRITICAL ANGLE EVENTS. PART I: METHODS USING THE ONE-WAY WAVE EQUATIONS*

Part I of this series starts with a brief review of the fundamental principles underlying wave field extrapolation. Next, the total wave field is split into downgoing and upgoing waves, described by a set of coupled one-way wave equations. In cases of limited propagation angles and weak inhomogeneities these one-way wave equations can be decoupled, describing primary waves only. For large propagation angles (up to and including 90°) an alternative choice of sub-division into downgoing and upgoing waves is presented. It is shown that this approach is well suited for modeling as well as migration and inversion schemes for seismic data which include critical angle events.     

Joint viscoacoustic waveform inversion with the separated upgoing and downgoing wavefields in zero-offset vertical seismic profile data

The attenuation of seismic waves propagating in reservoirs can be obtained accurately from the data analysis of vertical seismic profile in terms of the quality-factor Q. The common methods usually use the downgoing wavefields in vertical seismic profile data. However, the downgoing wavefields consist of more than 90% energy of the spectrum of the vertical seismic profile data, making it difficult to estimate the viscoacoustic parameters accurately. Thus, a joint viscoacoustic waveform inversion of velocity and quality-factor is proposed based on the multi-objective functions and analysis of the difference between the results inverted from the separated upgoing and downgoing wavefields. A simple separating step is accomplished by the reflectivity method to obtain the individual wavefields in vertical seismic profile data, and then a joint inversion is carried out to make full use of the information of the individual wavefields and improve the convergence of viscoacoustic full-waveform inversion. The sensitivity analysis of the different wavefields to the velocity and quality-factor shows that the upgoing and downgoing wavefields contribute differently to the viscoacoustic parameters. A numerical example validates our method can improve the accuracy of viscoacoustic parameters compared with the direct inversion using full wavefield and the separate inversion using upgoing or downgoing wavefield. The application on real field data indicates our method can recover a reliable viscoacoustic model, which helps reservoir appraisal.     

Noise transfer in variable‐depth streamer deghosting

Single‐component towed‐streamer marine data acquisition records the pressure variations of the upgoing compressional waves followed by the polarity‐reversed pressure variations of downgoing waves, creating sea‐surface ghost events in the data. The sea‐surface ghost for constant‐depth towed‐streamer marine data acquisition is usually characterised by a ghost operator acting on the upgoing waves, which can be formulated as a filtering process in the frequency–wavenumber domain. The deghosting operation, usually via the application of the inverse Wiener filter related to the ghost operator, acts on the signal as well as the noise. The noise power transfer into the deghosted data is proportional to the power spectrum of the inverse Wiener filter and is amplifying the noise strongly at the notch wavenumbers and frequencies of the ghost operator. For variable‐depth streamer acquisition, the sea‐surface ghost cannot be described any longer as a wavenumber–frequency operator but as a linear relationship between the wavenumber–frequency representation of the upgoing waves at the sea surface and the data in the space–frequency domain. In this article, we investigate how the application of the inverse process acts on noise. It turns out that the noise magnification is less severe with variable‐depth streamer data, as opposed to constant depth, and is inversely proportional to the local slant of the streamer. We support this statement via application of the deghosting process to real and numerical random noise. We also propose a more general concept of a wavenumber–frequency ghost power transfer function, applicable for variable‐depth streamer acquisition, and demonstrate that the inverse of the proposed variable‐depth ghost power transfer function can be used to approximately quantify the action of the variable‐depth streamer deghosting process on noise.     

Q-LOG DETERMINATION ON DOWNGOING WAVELETS AND TUBE WAVE ANALYSIS IN VERTICAL SEISMIC PROFILES1

Seismic attenuation introduces modifications in the wavelet shape in vertical seismic profiles. These modifications can be quantified by measuring particular signal attributes such as rise-time, period and shape index. Use of signal attributes leads to estimations of a seismic-attenuation log (Q-log). To obtain accurate signal attributes it is important to minimize noise influence and eliminate local interference between upgoing and downgoing waves at each probe location. When tube waves are present it is necessary to eliminate them before performing separation of upgoing and downgoing events. We used a trace-by-trace Wiener filter to minimize the influence of tube waves. The separation of upgoing and downgoing waves was then performed in the frequency domain using a trace-pair filter. We used three possible methods based on signal attribute measurements to obtain g-log from the extracted downgoing wavefield. The first one uses a minimum phasing filter and the arrival time of the first extremum. The two other methods determine the Q-factor from simple relations between the amplitudes of the first extrema and the pseudo-periods of the down-going wavelet. The relations determined between a signal attribute and traveltime over quality factor were then calibrated using field source signature and constant-Q models computed by Ganley's method. Q-logs thus obtained from real data are discussed and compared with geological information, specifically at reservoir level. Analysis of the tube wave arrivals at the level of the reservoir showed a tube wave attenuation that could not be explained by simple transmission effects. There was also a loss of signal coherence. This could be interpreted as tube wave diffusion in the porous reservoir, followed by dispersion. If this interpretation can be verified, tube wave analysis could lead to further characterization of porous permeable zones.     

基于两步SVD变换的零偏VSP资料上下行波场分离方法

垂直地震剖面(Vertical Seismic Profiling,VSP)资料处理中波场分离是关键问题之一.随着属性提取技术的发展,新的属性参数(例如Q值)提取技术对波场分离的保真性要求越来越高.本文改进了传统奇异值分解(Singular Value Decomposition,SVD)法,给出了一种对波场的动力学特征具有更好的保真性,可以作为Q值提取的预处理步骤的零偏VSP资料上下行波场分离方法.该方法通过两步奇异值分解变换实现:第一步,排齐下行波同相轴,利用SVD变换压制部分下行波能量;第二步,在剩余波场中排齐上行波同相轴,使用SVD变换提取上行波场.在该方法的实现过程中,压制部分下行波能量后的剩余波场中仍然存在较强的下行波干扰,使得上行波同相轴的排齐比较困难.本文给出了一种通过极大化多道数据线性相关程度(Maximize Coherence,MC)排齐同相轴的算法,在一定程度上解决了低信噪比下排齐同相轴的问题.将本文提出的方法用于合成数据和实际资料的处理,并与传统SVD法的处理结果进行对比,结果表明本文提出的波场分离方法具有良好的保真性,得到波场的质量明显优于传统SVD法.通过对本文方法和传统SVD法处理合成数据得到的下行波场提取Q值,然后进行对比可知,本文方法可以有效提高所提取Q值的准确性,适合作为Q值提取的预处理步骤.     

基于局部斜率属性的VSP波场分离研究

基于垂直地震剖面(VSP)资料中上、下行波视速度的差异,利用地震剖面同相轴局部斜率属性参数,提出了一种分离上、下行波场的新方法.首先利用Fourier变换初步分离上、下行波场,然后利用平面波分解滤波器(Plane Wave Destruction (PWD) Filter)技术估计初始分离波场的同相轴局部斜率属性参数,在此基础上对VSP原始资料波场分离.该方法是一种时间域最小平方优化分离波场的方法,不存在其他滤波方法阈值滤波器边界的影响,减少了因镶边问题带来的假象.模拟和实际资料处理结果表明,该方法与传统方法相比,分离出的上、下行波噪声假象少,振幅保持好,更好地消除了上、下行波的相互影响.     

Marine seismic wavefield measurement to remove sea-surface multiples

We propose a new method for removing sea-surface multiples from marine seismic reflection data in which, in essence, the reflection response of the earth, referred to a plane just above the sea-floor, is computed as the ratio of the plane-wave components of the upgoing wave and the downgoing wave. Using source measurements of the wavefield made during data acquisition, three problems associated with earlier work are solved: (i) the method accommodates source arrays, rather than point sources; (ii) the incident field is removed without simultaneously removing part of the scattered field; and (iii) the minimum-energy criterion to find a wavelet is eliminated. Pressure measurements are made in a horizontal plane in the water. The source can be a conventional array of airguns, but must have both in-line and cross-line symmetry, and its wavefield must be measured and be repeatable from shot to shot. The problem is formulated for multiple shots in a two-dimensional configuration for each receiver, and for multiple receivers in a two-dimensional configuration for each shot. The scattered field is obtained from the measurements by subtracting the incident field, known from measurements at the source. The scattered field response to a single incident plane wave at a single receiver is obtained by transforming the common-receiver gather to the frequency–wavenumber domain, and a single component of this response is obtained by Fourier transforming over all receiver coordinates. Each scattered field component is separated into an upgoing wave and a downgoing wave using the zero-pressure condition at the water-surface. The upgoing wave may then be expressed as a reflection coefficient multiplied by the incident downgoing wave plus a sum of scattered downgoing plane waves, each multiplied by the corresponding reflection coefficient. Keeping the upgoing scattered wave fixed, and using all possible incident plane waves for a given frequency, yields a set of linear simultaneous equations for the reflection coefficients which are solved for each plane wave and for each frequency. To create the shot records that would have been measured if the sea-surface had been absent, each reflection coefficient is multiplied by complex amplitude and phase factors, for source and receiver terms, before the five-dimensional Fourier transformation back to the space–time domain.     

用于零偏移距VSP资料的自适应波形反演方法研究

提出一种利用零偏移距VSP资料初至下行波(即直达波)反演介质品质因子Q及层速度V等参数的方法, 称为自适应时域波形反演法(ATWI). 为了充分地利用有效信息, 该方法根据实际VSP资料的信噪比及直达波与上行波干涉的程度,自适应最大限度地选取未受干扰的初至波片段,并用该片段构造目标函数; 通过恰当地构造数据加权矩阵提高目标函数对Q值变化的敏感性;为克服非线性反演的病态问题,采用近来发展的乘性正则化方法,并通过约束条件限制待求参数的取值范围;文中推导出了雅可比矩阵各元素的解析表达式,从而减小了反问题的计算量.合成数据反演结果表明,与谱比值法和子波包络峰值瞬时频率法相比较,ATWI法受上行波影响相对较小、抗噪性能更强.实际资料算例进一步证明了ATWI方法的有效性.