嫦娥四号VLBI群时延跳变研究

相时延处理软件是嫦娥四号(CE-4)任务甚长基线干涉测量(Very Long Baseline Interferometry,VLBI)测轨分系统软件配置项之一,利用其处理着陆巡视器X波段DOR(Differential One-way Ranging)信号时,观测弧段(scan)内偶尔存在残余群时延跳变问题.论文主要分为两部分:一是根据VLBI信号接收和数据处理流程,从相关相位、频率、幅度和功率方面进行分析,最终将影响因素定位在昆明测站模拟信号异常;二是以scan内时延跳变影响因素分析为基础,通过修正异常基线相关相位,研究残余群时延跳变事后改正方法,并利用定轨软件验证其有效性,升级了相时延处理软件.     

月球交会对接VLBI差分时延研究

中国探月3期任务中,月球交会对接技术是任务成功的重要保障.利用嫦娥3号(CE03)绕月飞行的VLBI (Very Long Baseline Interferometry)时延数据,模拟仿真绕月交会对接过程中,同波束VLBI观测模式下,差分群时延的变化情况.仿真结果显示,在远程导引段,轨道器和上升组合体轨道距离保持100 km,持续半小时,差分群时延很好地反映了两者的轨道信息,可以用于定轨定位;自主控制段,上升组合体靠近轨道器,在轨道距离从5 km减小到20 m过程中,上升组合体加速追赶轨道器时,差分群时延快速趋近于0,上升组合体减速远离轨道器时,差分群时延绝对值快速变大.最后,利用嫦娥3号奔月段同时发射两个DOR (Differential One-Ranging)信号的VLBI时延数据,计算差分相时延,初步展示了月球交会对接过程中同波束VLBI差分相时延的误差情况.     

星载氢钟VLBI观测实验及分析

中国计划于2025年左右建立月球轨道VLBI (Very Long Baseline Interferometer)测站,将会搭载被动型星载氢钟作为时间频率标准.由于是首次在VLBI观测中使用星载氢钟,需要研究和验证其可行性.因此,利用星载氢钟作为频率基准开展了VLBI观测.实验时,分别使用主动型地面氢钟和被动型星载氢钟作为频率基准,利用上海天文台佘山25 m射电望远镜和其他测站对我国火星探测器天问一号进行了交替VLBI观测.数据处理分析结果表明,基于地面氢钟与星载氢钟的VLBI残余群时延标准差均在0.5 ns以内,表明星载氢钟可满足深空探测VLBI测定轨的精度要求,验证了其作为月球VLBI测站频率基准的可行性.     

利用国内VLBI网跟踪大椭圆轨道卫星

2004年7月,昆明VLBI站经过改造,由上海、乌鲁木齐和昆明站组成的中国VLBI网(CVN)采用统一的MARK4格式编制器和CVN硬盘记录系统,对大椭圆轨道卫星“探测1号”的2圈轨道的共同可视弧段进行了跟踪观测．软件相关处理程序已成功地用于检测卫星遥测信号的干涉条纹和数据相关处理．采用基于条纹幅度的加权最小二乘条纹拟合方法,获得了卫星VLBI观测量及其精度估计,完成了卫星VLBI观测量的3基线闭合误差检验．应用河外射电源校准方法和多频点相位校正信号提取方法,进行了台站钟差和仪器延迟等系统误差改正．经系统差改正后的卫星VLBI观测量序列已用于“探测1号”卫星的轨道确定．     

CVN硬盘系统和软件相关处理在e-VLBI试验中的应用

介绍了中国VLBI网（CVN）的e-VLBI技术研究进展．CVN包括上海佘山、乌鲁木齐南山2个固定观测站和云南昆明的流动站，以及上海天文台的2台站硬件相关处理机。2003年上海天文台自行研制了基于PC技术的VLBI数据记录、回放系统，命名为CVN硬盘系统，并成功将其安置于CVN观测站和处理机系统。硬件处理机经过改造后，已能处理来自硬盘和原有磁带系统的数据．从2003年至今，中国VLBI网采用该硬盘系统进行了多次VLBI观测和e-VLBI试验。在CVN硬盘系统基础上，软件相关处理技术的研究也得以开展。软件相关处理原型程序已经被用于台站条纹检测、卫星条纹搜索和数据处理中。该软件获得的计算结果被成功用于国内第一个3台站卫星VLBI的延迟和延迟率闭合试验，以及国内首次利用VLBI数据进行的卫星定轨试验。除此之外，该软件还用作硬件处理机的条纹引导器。为适应未来“嫦娥”月球探测工程，CVN将扩展成含有4个观测站和2个相关处理机（硬件、软件）的实时VLBI网。今后，e-VLBI将被应用于月球卫星导航以及测地和天体物理的VLBI观测。     

VLBI相位校正信号提取的软件实现方法

从VLBI相关处理结果中提取的延迟值包括了天线、终端等设备的时延,必须对其加以修正,最终结果才能达到精度要求。提取相位校正信号,可以消除这些设备引入的时延,从而校正同一波前信号到达基线两端的几何时延。该文介绍了提取相位校正信号的原理、算法及软件实现方法。软件采用多线程和SSE技术,具备4台站多通道全部相位校正信号提取能力。     

Orbit determination of satellite “Tance 1” with VLBI data

The satellite “Tance 1” of the “Double-Star Program” is the first truly scientific experimentation satellite of China. Its orbit is the farthest so far launched in China, with a geocentric apogee reaching 78 thousand kilometers. The tracking of “Tance 1” and of more distant space targets, such as the lunar exploration craft, can be realized with the VLBI technique of radio astronomy. In order to test and verify the role which the VLBI technique plays in the lunar exploration program of China, Shanghai Astronomical Observatory organized the only 3 tracking stations in China (located at Shanghai, Urumqi and Kunming), to carry out test tracking of “Tance 1,” and used the time delay data obtained to determine the orbit of “Tance 1” over a two-day period, so providing a preliminary assessment of the possibility of VLBI orbit determination. The fitting error of the orbit so obtained is about 5.5 m in the time delay and about 2 cm/s in the delay rate (this for checking only), much better than is provided by the preliminary orbit (used merely for ensuring tracking) in which the corresponding figures are around 2 km and 15 cm/s. Further, if the orbit is determined by using both the time delay and time delay rate data (with weights according to their internal accuracies), then the residuals are 5.5 m in the time delay and 2 cm/s in the delay rate. For an appreciation of the true accuracy of the VLBI orbit determination, we used simulation data (of the observed two-day VLBI data) and found the results depended greatly on the error in the dynamic model of the satellite which, however, is difficult to assess, while the formal residuals are of the order of 1 kin in the delay and of cm/s in the delay rate. The simulation computation also indicates that a joint determination using both VLBI and USB data will have an improved accuracy.     

环月飞行器精密定轨的模拟仿真

以中国正在实施的探月计划“嫦娥1号”工程为背景，分析了在中国联合S波段(USB)测控网和甚长基线射电干涉(VLBI)跟踪网的现有空间分布、观测精度水平下的环月飞行器精密定轨．采用的方法是模拟仿真计算，即首先模拟观测数据，然后在计入各误差源的影响后进行求解，并对解算结果进行比较．模拟仿真的工具是美国宇航局哥达德飞行中心的空间数据分析软件系统GEODYN．环月飞行的主要误差源是月球重力场，为此首先讨论了目前精度最高的月球重力场模型JGL165P1的(形式)误差．在模拟了测距、测速以及VLBI的时延、时延率数据后，计入月球重力场的误差进行精密轨道确定．定轨时采用了减缩动力学(reduced dynamic)方法，即选用合适的经验加速度参数吸收重力场误差对定轨的影响．结果表明对于一个不将月球重力场作为主要科学目标的探月计划(如“嫦娥1号”)，减缩动力学方法是一个简单、有效地提高环月飞行器定轨精度的方法．     

空间VLBI与天文地球动力学

介绍了空间VLBI的精密定轨及其在天文地球动力学应用研究中的最新进展．指出因为空间VLBI的时延和时延率观测量同时涉及到射电参考系、动力学参考系和地固参考系,所以特别适合于参考系的直接连接工作．对为评价参考系连接的精度而发展的协方差分析理论也作了介绍,还分析了将时延和时延率资料用于精密定轨时遇到的困难及其解决办法．     

利用VLBI数据确定"探测一号"卫星的轨道

双星计划的“探测一号”是中国首颗真正严格意义上的科学实验卫星,其运行轨道为中国迄今所发射的卫星中距地球最远,远地点地心距达7．8万公里．采用射电天文的VLBI技术可以对“探测一号”以及更远的深空目标,如探月飞行器实现跟踪．为了验证VLBI技术在我国探月计划中的作用,上海天文台组织了国内目前仅有的上海、乌鲁木齐和昆明3个台站对“探测一号”进行试跟踪,利用对“探测一号”约两天的VLBI观测数据,确定“探测一号”卫星的轨道,对VLBI的定轨能力做初步的探讨．按照测控部门提供的初轨 (其精度仅保证跟踪)推算的轨道与VLBI时延的拟合误差平均约2 km,时延率的拟合误差平均约15 cm／s．而利用VLBI数据定轨后的拟合程度相对于初轨有了很大的改善,结果表明,单独利用VLBI时延定轨,时延的拟合精度约5．5 m,作为外部检核的VLBI时延率的拟合精度在2 cm／s左右．单独利用VLBI时延率定轨,时延率的拟合精度约为1．3 cm／s,作为外部检核的VLBI时延的拟合精度约为29 m．而若将时延和时延率数据联合定轨,采用其内符精度加权,VLBI时延和时延率的残差分别为5．5 m和 2 cm／s．为了合理地评估VLBI定轨的真实精度,利用模拟数据进行误差协方差分析,结果表明VLBI定轨精度受动力学模型误差的影响较大,由于"探测一号”卫星的动力学模型难以精确确定,所以利用两天弧段的VLBI数据确定“探测一号”卫星轨道的位置误差为km量级,而速度误差可达cm／s量级．模拟计算还表明, VLBI和USB数据联合定轨可以大大提高定轨精度．     

Simulation of precise orbit determination of lunar orbiters

Based on the ongoing Chinese lunar exploration mission, i.e. the “Chang'e 1” project, precise orbit determination of lunar orbiters is analyzed for the actual geographical distribution and observational accuracy of the Chinese united S-band (USB) observation and control network as well as the very long baseline interferometry (VLBI) tracking network. The observed data are first simulated, then solutions are found after including the effects of various error sources and finally compared. We use the space data analysis software package, GEODYN, developed at Goddard Space Flight Center, NASA, USA. The primary error source of the flight orbiting the moon is the lunar gravity field. Therefore, the (formal) error of JGL165P1, i.e. the model of the lunar gravity field with the highest accuracy at present, is first discussed. After simulating the data of ranging and velocity measurement as well as the VLBI data of the time delay and time delay rate, precise orbit determination is carried out when the error of the lunar gravity field is added in. When the orbit is determined, the method of reduced dynamics is adopted with the selection of appropriate empirical acceleration parameters to absorb the effect of errors in the lunar gravity field on the orbit determination. The results show that for lunar missions like the “Chang'e 1” project, that do not take the lunar gravity field as their main scientific objective, the method of reduced dynamics is a simple and effective means of improving the accuracy of the orbit determination of the lunar orbiters.     

lbb-用于射电天文VLBI基带数据读写的库

Library for Baseband (lbb)是一个自研的用于读取解析甚长基线干涉测量(Very Long Baseline Interferometry, VLBI)基带数据的工具库,主要用于VLBI观测中对终端基带数据的读取、解析及输出结果分析.该软件库通过对基带数据的自动判断,自动实现读取不同数据格式的功能,并提供了各种各样的API (Application Programming Interface)功能供用户调用.目前lbb软件库已经成功应用在了探月工程VLBI测轨任务中的硬件相关处理机配置项和测地VLBI观测数据的预处理.文章详细介绍了lbb软件库的设计、功能及用法.     

基于天文开源软件的卫星干涉测量数据处理系统

VLBI (Very Long Baseline Interferometry)技术观测卫星需要对干涉测量数据进行相关和后处理,通过相关、时延校准、条纹搜索,最终得到卫星的基线几何时延.基于天文开源软件建立起一套卫星干涉测量数据处理系统.该系统可工作在实时和事后两种状态,实现相关、中性大气、电离层、钟模型以及仪器硬件的时延校准、条纹搜索、生成基线时延和时延率序列.使用该系统处理北斗GEO (Geosynchronous Earth Orbit)卫星的干涉测量试验数据,得到了精度在1–2 ns量级的卫星基线时延序列.     

卡尔曼滤波在VLBI数据处理中的应用

本文探讨卡尔曼滤波技术用于VLBI天体测量和大地测量数据处理的原理和方法;并深入地对Herring等提出的软件系统（SOLVK）进行详细研究,提出一些具体的办法以便应用．然后用1993—1994年的VLBI观测资料,精确计算了几种天文学和地球动力学参数作为例证．     

Fast radio burst search: cross spectrum vs. auto spectrum method

The search for fast radio bursts(FRBs) is a hot topic in current radio astronomy studies. In this work, we carry out a single pulse search with a very long baseline interferometry(VLBI) pulsar observation data set using both auto spectrum and cross spectrum search methods. The cross spectrum method,first proposed in Liu et al., maximizes the signal power by fully utilizing the fringe phase information of the baseline cross spectrum. The auto spectrum search method is based on the popular pulsar software package PRESTO, which extracts single pulses from the auto spectrum of each station. According to our comparison, the cross spectrum method is able to enhance the signal power and therefore extract single pulses from data contaminated by high levels of radio frequency interference(RFI), which makes it possible to carry out a search for FRBs in regular VLBI observations when RFI is present.     

A model of geometric delay in Space VLBI

A model which includes the relativistic effect is derived that can be applied to space very long baseline interferometry(SVLBI) while taking observations of sources at infinite distance. In SVLBI,where one station is on a spacecraft,the length of the baseline and the orbiting station's maximum speed in an elliptical orbit around the Earth is much larger than the ground-based VLBI,which leads to a larger delay and higher delay rate. The delay models inside VLBI correlators are usually expressed as fifth-order polynomials during a limited time interval,which are evaluated by firmware in the correlator and track delays in the interferometer over the limited time interval. The higher SVLBI delay rate requires more accurate polynomial fitting and evaluation,as well as more frequent model updates.     

The Experiment and Analysis on VLBI Observations of Space Passive Hydrogen Maser

China plans to establish a lunar orbital VLBI (Very Long Baseline Interferometer) station around 2025, which will carry a space passive hydrogen maser as the time and frequency reference. Since it is the first time to use a space passive hydrogen maser for VLBI observation, its feasibility needs to be studied and verified. Therefore, we carried out VLBI observations using the space passive hydrogen maser as the frequency reference. In the experiment, the active hydrogen atomic clock and space passive hydrogen maser were used as the frequency standard, and the alternate VLBI observations of China’s Mars probe TW1 (Tianwen 1) were carried out using the 25 m radio telescope at Sheshan, Shanghai, and other VLBI stations. The results of data processing and analysis show that the standard deviation of VLBI residual group delay based on both active hydrogen atomic clock and space passive hydrogen maser are within 0.5 ns, which indicates that the space passive hydrogen maser can meet the accuracy requirements of VLBI measurement for deep space exploration, and verify its feasibility as the frequency standard of lunar orbital VLBI stations.     

Tropospheric Delay from VLBI and GNSS Measurements

Using an updated version of the QUASAR software package developed at the Institute of Applied Astronomy of the Russian Academy of Sciences, we have processed the VLBI observations within the international CONT14 program (May 6–20, 2014), in which a global network of 17 stations was involved (a total of ~250 000 observations). The package update concerned the optimization of data structure and the refinement of stochastic models for the random variations in wet tropospheric delay and atomic clock difference. The main goal of this paper is to compare the VLBI determinations of the tropospheric delay with its independent determinations using global navigation satellite systems (GNSS). We show that both these determinations agree well between themselves only in the case of a global analysis of the VLBI observations, where the VLBI station coordinates are also refined, along with the tropospheric delay and the clock synchronization and Earth orientation parameters. If, alternatively, the station coordinates are insufficiently accurate and are not refined from VLBI observations, then it is appropriate not to determine the tropospheric delay from these observations, but to take it from the publicly accessible independent GNSS data. However, this requires that the VLBI and GNSS techniques operate simultaneously at a common observing site. We have established the shortcomings of the universally accepted method of stabilizing the global solution associated with the absence of a criterion for choosing reference stations and radio sources. Two ways of their elimination are proposed: (i) introducing a coordinated list of weight factors for the errors in the coordinates of such stations and sources into the stabilization algorithm and (ii) adopting a coordinated list of stations and sources the refinement of whose coordinates is not required at all for a certain time.     

海洋卫星测高技术的新进展

主要介绍９０年代发射的新一代海洋测高卫星。ＴＯＰＥＸ／ＰＯＳＥＩＤＯＮ卫星和ＥＲＳ－１卫星的情况。在简要说明这两颗测高卫星的主要任务和星载科学研究仪器之后，叙述了轨道选择的原理和精密轨道确定的情况，并介绍了最近国外利用ＴＯＰＥＸ／ＰＯＳＥＩＤＯＮ资料进行的海洋学研究和成果以及未来的测高计划。     

Early VLBI in the USSR

This article gives story of interferometer with independent elements (Very Long Baseline Interferometer) in Russia. At the end of February 1962 the author discussed with G.Ya. Gus'kov, DSN Station, Evpatorija a new type of radio interferometer and proposed an experiment between two DSN stations. In September 1962 he reported the new method and proposed a VLBI experiment at seminar of Radio Astronomical Laboratory, Pushino, and then at a seminar of Astronomical Institute GAISH which recommended to take out a Patent. In December GAISH sent documents to the Patent Bureau. In summer 1963 the author discussed with B. Lovell in Evpatorija the VLBI method of and we signed memorandum an Ev‐JB experiment at λ = 32 cm. In December 1963 the Patent Bureau permitted publication, and the paper was sent to Radiofizika. Really VLBI in the USSR began with the proposal of M. Cohen and K. Kellermann, February 1968, to do an experiment between 22‐m antenna Pushino and 43‐m Green Bank. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)