共查询到20条相似文献,搜索用时 584 毫秒
1.
有限元方法在台湾以东海域黑潮流速计算中的应用 总被引:1,自引:1,他引:1
1956-1960年间由Turner[13],Clough[16]等引入有限元概念、方法以来,首先在结构分析领域内取得极大进展.与此同时,它也应用于固体力学的许多领域[2,4,7].在七十年代,有限元方法较广泛地应用于流体力学的许多领域[3,11,12].最近几年来,有限元方法也应用于物理海洋学中的一些问题中,例如湖泊与海洋环流问题[14,15,19],潮汐与风暴潮问题[17]等.本文从流体力学原理出发,应用有限元理论建立了黑潮的三维流场有限元方程组.采用了海流理论中常见的物理模式[1,5,18],考虑了压力梯度、柯氏力、重力、水平与垂直方向上的湍流摩擦效应,而不考虑惯性力的影响.本文对所应用的有限元几何形状——三角棱柱进行了插值误差分析,证明了三角形棱面不能出现较大的钝角,也证明了完备性的问题.并将动力计算和有限元二种方法计算的流速进行了比较. 相似文献
2.
A mathematical model based on the finite element technique is applied to study seiche oscillations in the Sea of Azov in an approximation of the linear theory for long waves. The model has been used to compute periods of the initial ten seiche modes.Translated by Vladimir A. Puchkin. 相似文献
3.
4.
An updated Lagrangian finite element formulation of a three-dimensional annular section beam element is presented for large displacement and large rotation dynamic analyses of flexible riser structures. In this formulation a new linearization method is used to avoid inaccuracies normally associated with other linearization schemes. The effects of buoyancy force as well as steady state current loading are considered in the finite element solution for riser structures response. The formulation has been implemented in a nonlinear finite element code and the results are compared with those obtained from other schemes reported in the literature. 相似文献
5.
垂向二维潮流数值模型及其在长江口北槽的应用 总被引:1,自引:0,他引:1
应用变网格有限元方法,采用任意四边形等参单元,离散横向积分的Navier—Stokes方程,建立河口潮流垂向二维数学模型。应用此模型,对长江口北槽水域两个观测站的潮流水位、流速垂线分布和整个北槽潮流流速纵向分布进行了模拟。潮流水位、流速垂线分布的模拟值分别与观测站的实测值可以较为吻合,证明了本文模型的实用有效。模拟得到的涨急、落急时刻整个北槽潮流流速纵向分布给出了定性的结果。 相似文献
6.
Yinghui Tian Mark J. Cassidy Christophe Gaudin Maozhu Peng 《Marine Georesources & Geotechnology》2013,31(10):1227-1235
AbstractThis paper presents an improved plasticity force-resultant model for anchors deeply embedded in clays, developed from large deformation finite element analyses. The current available force-resultant models for anchors are mainly developed from small strain finite element analysis while experimental approach has not been used due to technical challenges. The advantage of large deformation finite element analysis is that it provides much more data points to fit the yield surface than small strain finite element analysis, in addition to avoiding excess mesh distortion problems. Furthermore, the flow rule or normality can be effectively checked in the large deformation finite element analysis and further used to improve the fitting quality. After validated against retrospective simulations, the better performance of the developed plasticity force-resultant model is demonstrated by comparing with available experimental observations from centrifuge test. 相似文献
7.
驳船横荡运动下海洋立管的动力响应 总被引:1,自引:0,他引:1
海洋浮式生产系统下立管的受力情况复杂,国内的研究大多集中于两端固支或简支的情况。本文则以水面驳船的横荡运动作为立管上端的动力边界条件,将Matteo Luca Facchinetti的尾流振子模型与考虑外流涡激振动作用下海洋立管运动微分方程相结合,得到管道与流体的耦合振动方程,用Hermit插值函数将方程进行有限元离散,并用Newmark时程分析法及迭代法求解,得到管道各点的位移时程曲线。结果表明:立管的振动频率主要由上端驳船的运动频率所确定,随着驳船运动频率的增加,立管中点的位移幅值先增加后减小;在有动边界存在的条件下,改变外流流速对立管中点的位移幅值影响不大。 相似文献
8.
This paper analyses nonlinear dynamics of cable towed body system. The cable has been modeled and analyzed using a new nodal position finite element method, which calculates the position of the cable directly instead of the displacement by the existing finite element method. The newly derived nodal position finite element method eliminates the need of decoupling the rigid body motion from the total motion, where numerical errors arise in the existing nonlinear finite element method, and the limitation of small rotation in each time step in the existing nonlinear finite element method. The towed body is modeled as a rigid body with six degrees of freedom while the tow ship motion is treated as a moving boundary to the system. A special procedure has been developed to couple the cable element with the towed body. The current approach can be used as design tool for achieving improved directional stability, maneuverability, safety and control characteristics with the cable towed body. The analysis results show the elegance and robustness of the proposed approach by comparing with the sea trial data. 相似文献
9.
10.
Igor Tsukrov Oleg Eroshkin David Fredriksson M. Robinson Swift Barbaros Celikkol 《Ocean Engineering》2003,30(2):251-270
A consistent finite element is proposed to model the hydrodynamic response of net panels to environmental loading. This equivalent net element is constructed to reproduce the drag, buoyancy, inertial and elastic forces exerted on the netting by current and waves. To evaluate the accuracy of the proposed finite element modeling, numerical predictions have been compared with the experimental observations and (simplified) analytical results of other authors. This new modeling technique has been applied to evaluate the performance of a tension leg fish cage in the open ocean environment. 相似文献
11.
12.
13.
14.
Based on a procedure which couples the finite element method with the doubly asymptotic approximation, this work addresses the problem of the transient responses of a submerged spherical shell subjected to strong, plane, incident shock waves, in which elastoplastic material behavior is considered. Simulation results indicate that the procedure adopted shows good agreement with related literature, which considered linear elastic behavior of the shell. Also presented herein are the time histories of surface pressure, radial velocity and von Mises stress of the shell. Moreover, deformation diagrams and spreading of the plastic zone of the shell are described as well. 相似文献
15.
The scaled boundary finite element method (SBFEM) is a novel semi-analytical technique combining the advantage of the finite element method (FEM) and the boundary element method (BEM) with its unique properties. In this paper, the SBFEM is used for computing wave passing submerged breakwaters, and the reflection coeffcient and transmission coefficient are given for the case of wave passing by a rectangular submerged breakwater, a rigid submerged barrier breakwater and a trapezium submerged breakwater in a constant water depth. The results are compared with the analytical solution and experimental results. Good agreement is obtained. Through comparison with the results using the dual boundary element method (DBEM), it is found that the SBFEM can obtain higher accuracy with fewer elements. Many submerged breakwaters with different dimensions are computed by the SBFEM, and the changing character of the reflection coeffcient and the transmission coefficient are given in the current study. 相似文献
16.
在该海域潮流计算的基础上,利用有限元法建立了二维的拉格朗日余流模型,得出了威海及烟台南部海域的拉格朗日余流分布。跟踪了文登、乳山、海阳、莱阳近岸主要排污口的污水输运轨迹,为沿岸县市污水排放的选址提供理论依据。 相似文献
17.
18.
Lin Mingchung Hsiao Sungshan Hsu Yungcheng
Professor Dept. of Naval Architecture Ocean Engineering National Taiwan University Taiwan. Doctor Course Student Dept. of Naval Architecture Ocean Engineering National Taiwan University Taiwan 《中国海洋工程》1994,(3)
-Wave refraction-diffraction due to a large ocean structure and topography in the presence of a 'current are studied numerically. The mathematical model is the mild-slope equation developed by Kirby (1984). This equation is solved using a finite and boundary element method. The physical domain is devid-ed into two regions: a slowly varying topography region and a constant water depth region. For waves propagating in the constant water depth region, without current interfering, the mild- slope equation is then reduced to the Helmholtz equation which is solved by boundary element method. In varying topography region, this equation will be solved by finite element method. Conservation of mass and energy flux of the fluid between these two regions is required for composition of these two numerical methods. The numerical scheme proposed here is capable of dealing with water wave problems of different water depths with the main characters of these two methods. 相似文献
19.