Effects of natural and calcined poultry waste on Cd, Pb and As mobility in contaminated soil

The reuse of waste materials as soil additives could be a welcome development in soil remediation. The mobility of Cd, Pb and As in a contaminated soil was investigated using natural and calcined poultry wastes (eggshell and chicken bone), CaCO₃ and CaO at different application rates (0, 1, 3 and 5 %). The chemical composition accompanied with mineralogical composition indicated that CaCO₃ and CaO were the major components in natural and calcined eggshells, respectively, while hydroxyapatite (HAP) dominated the natural and calcined chicken bones. The results showed that soil pH tended to increase in response to increasing application rates of all soil additives. The effectiveness of the additives in reducing Cd, Pb and As mobility was assessed by means of chemical extractions with 0.1 N HCl for Cd and Pb or 1 N HCl for As, according to Korean Standard Test (KST) method. Both calcined eggshell and chicken bone were equally effective with CaO or CaCO₃ in reducing the concentration of 0.1 N HCl-extractable Cd from 6.17 mg kg^?1 to below warning level of 1.5 mg kg^?1, especially at the highest application rate. The application of calcined eggshell, CaO and CaCO₃ also decreased the concentration of 0.1 N HCl-extractable Pb from 1,012 mg kg^?1 to below warning level of 100 mg kg^?1. The Pb concentration decreased significantly with an increasing application rate of chicken bone, but remained above warning level even at the highest application rate. On the contrary, natural and calcined chicken bones led to a significant increase in the mobility of As when compared with the control soil. These findings illustrate that calcined eggshell in particular is equally effective as pure chemical additives in stabilizing Cd and Pb in a contaminated agricultural soil. The presence of As in metal-contaminated soils should be taken into consideration when applying phosphate-containing materials as soil additives, because phosphate can compete with arsenate on adsorption sites and result in As mobilization.     

Uptake of hazardous elements by spring onion (<Emphasis Type="Italic">Allium fistulosum</Emphasis> L.) from soil irrigated with different types of water and possible health risk

Bio-concentration of elements such as Mo, As, Se, Fe, Cu, Zn, Ni and Pb was analyzed in spring onion (Allium fistulosum L.) in three different locations of central Punjab, Pakistan. At location GW, relatively low level of hazardous elements was found in spring onion, suggesting that groundwater is a safe source of water for irrigating food crops. The pH of soil at wastewater irrigation was found less acidic (pH 7.4) than the other sites. The range of concentration in the different samples of spring onion was as follows: 6.15–8.16 mg kg^?1 for Mo, 2.77–4.28 mg kg^?1 for As, 0.395–0.705 mg kg^?1 for Se, 36.73–48.17 mg kg^?1 for Fe, 10.58–16.26 mg kg^?1 for Cu, 28.87–39.79 mg kg^?1 for Zn, 6.66–8.75 mg kg^?1 for Ni and 4.33–6.09 mg kg^?1 for Pb, respectively. High bio-concentration of Zn (15.37) from soil to spring onion was found at canal water irrigated location. The estimated daily intake of metal for spring onion was less, but the health risk index was higher than 1 for Mo, As, Cu, Pb and Ni, respectively. This was due to higher proportion of spring onion in diet, which consequently increased the health risk index for metals. Therefore, it is recommended to avoid growing vegetables in untreated urban and rural wastewater containing elevated amounts of metals.     

Role of rhizosphere and soil properties for the phytomanagement of a salt marsh polluted by mining wastes

The goal of this study was to evaluate the soil properties and their modifications within the rhizosphere of spontaneous vegetation as key factors to assess the phytomanagement of a salt marsh polluted by mining wastes. A field survey was performed based on a plot sampling design. The results provided by the analyses of rhizospheric soil (pH, electrical conductivity (EC), organic carbon, total nitrogen, etc.) and metal(loid)s’ phytoavailability (assessed by EDTA) were discussed and related to plant metal uptake. The averages of pH and EC values of the bulk soil and rhizospheric samples were in the range of neutral to slightly alkaline (pH 7–8) to saline (>2 dS m^?1), respectively. Heavy metal and As concentrations (e.g. ~600 mg kg^?1 As, ~50 mg kg^?1 Cd, ~11,000 mg kg^?1 Pb) were higher in the rhizosphere for both total and EDTA-extractable fraction. Phragmites australis uptaked the highest concentrations in roots (e.g. ~66 mg kg^?1 As, ~1,770 mg kg^?1 Zn) but not in shoots, for which most of plant species showed low values for Zn (<300 mg kg^?1) but not for Cd (>0.5 mg kg^?1) or Pb (~20–40 mg kg^?1). Vegetation distribution in the studied salt marsh looked to be more affected by salinity than by metal pollution. The free availability of water for plants and the incoming nutrient-enriched effluents which flow through the salt marsh may have hindered the metal(loid)s’ phytotoxicity. The phytomanagement of these polluted areas employing the spontaneous vegetation is a good option in order to improve the ecological indicators and to prevent the transport of pollutants to nearby areas.     

Lead removal from aqueous solution by basaltic scoria: adsorption equilibrium and kinetics

Pb-contaminated water is a dangerous threat occurring near metallurgic and mining industries. This circumstance produces serious environment concern, due to Pb(II) high toxic effects. Several reactive materials have been reported for Pb(II) adsorption, but not all reached final Pb(II) suitable concentrations, or they are expensive and rejected in massive remediation technologies; hence, natural materials are good options. The adsorption behavior of a volcanic scoria (two sieved fractions 1425 and <425 µm) was studied toward synthetic Pb(II) water solutions in batch experiments (170.4–912.3 mg L^?1) with high removal efficiencies (97%). The Langmuir model fits both fractions with high linear correlation coefficients (0.9988 and 0.9949) with high maximum capacity values (588.23 and 555.55 mg g^?1). Separation factor R _L parameter varies with initial concentration, and the empirical equation predicts the limits of the material usefulness, a criterion proposed in this paper for conditions’ selection. The Lagergren pseudo-second-order analysis demonstrates chemisorption; calculated rate constant (416.66 mg g^?1 min^?1). Weber–Morris intraparticle model proves that the adsorption phenomena occur fast on the material surface (k _inst = 72 g mg^?1 min^?0.5). The characterization of the volcanic material afforded the elemental composition (X-ray fluorescence), and the empirical formula was proposed. X-ray diffraction patterns verify the material structure as basalt, with a plagioclase structure that matches anorthite and albite, mostly composed of quartz. The presence of oxides on the material surface explain the high Pb(II) adsorption capacity, observed on the surface by scanning electronic microscopy. The studied volcanic scoria has potential use as a Pb(II) adsorbent in water remediation technologies.     

Soil contamination by metals with high ecological risk in urban and rural areas

Industrial development, intensive agriculture and fast urbanization have caused the metal contents of soils to increase to many times the allowable limits. To assess this impact on urban and rural soils, we quantified the Cd, Cr, Cu, Pb, Ni and Zn contents of 258 soil samples from the Recife metropolitan region (RMR). The objectives of the study were to estimate the probability of ecological risk, to determine the spatial pattern of the metals’ accumulation in the soil and to identify potential sources for the metals using a multivariate geostatistical approach. Mean concentrations of Zn, Cr, Pb, Cu, Ni and Cd in soils were 65.2, 17.9, 16.5, 12.8, 6.3 and 1.5 mg kg^?1, respectively. The results demonstrated that the Cd was anthropogenic in origin, the Cr and Ni were lithogenic (natural) in origin and the Cu, Pb and Zn were mixed in origin. Cd contaminated 91% of the samples; the median content of Cd (1.4 mg kg^?1) was three times the quality reference value for soil. The Cd contents of sugarcane fields exceeded the allowable limit (3.0 mg kg^?1) for agricultural areas. The spatial variability of the metals in the RMR showed that metallurgy, cement production, vehicle exhaust and vehicular traffic were the main sources of metals in urban areas, while phosphate-based fertilizers were the main sources in rural areas. More than 80% of the metropolitan region surveyed in the study was at moderate to high ecological risk.     

Ameliorating nitrite inhibition in a low-temperature nitritation–anammox MBBR using bacterial intermediate nitric oxide

The long-term sustainability of an anaerobic ammonium oxidation (anammox) process in a moving bed biofilm reactor (MBBR) treating highly concentrated (mean of 740 mg NH₄ ⁺-N L^?1) wastewater was demonstrated by 1600 days of efficient operation. A high maximum total nitrogen removal rate (TNRR) of 1.5 g N m^?2 d^?1 was achieved at the low temperature of 20 °C. For nitrogen removal recovery in cases of nitrite inhibition, anammox intermediate nitric oxide (NO) was tested in batch experiments as an N-removal accelerating agent. The effect of the addition of various NO dosages (8–72 mg NO-N L^?1) was studied under inhibitory nitrite concentrations (>100 mg NO₂ ^?-N L^?1) for anammox bacteria. Optimal maintained NO concentration was 58 mg NO-N L^?1 and brought about the highest biofilm-specific anammox activity (SAA). Compared to a blank test, the minimum concentration of added NO of 40 mg NO-N L^?1 showed a statistically significant (p < 0.05) accelerating effect on SAA. No inhibition of SAA by NO was observed, although at NO concentrations exceeding 72 mg NO-N L^?1, the acceleratory effect upon SAA was decreased by 8%. Changes in the bacterial consortia involved in nitrogen conversion were determined concurrently for the different nitrogen removal rates and operational conditions. Quantities of Planctomycetales clone P4 strains, which are the closest (99% similarity) relative to Candidatus Brocadia fulgida, increased from 1 × 10³ to 1 × 10⁶ anammox gene copies per g total suspended solids during reactor operation days 568–1600, which was determined by quantitative polymerase chain reaction. During the operation of the MBBR, the abundance of ammonium-oxidizing bacteria (AOB) increased proportionally (up to 30%). The abundance of nitrite-oxidizing bacteria (NOB) did not increase (remaining below 10%) during days 232–860. AOB became predominant over NOBs owing to the inhibition of free ammonia spiking on NOBs.     

Multivariate statistical analysis of heavy metals in foliage dust near pedestrian bridges in Guangzhou, South China in 2009

The heavy metal content of particulate matter was investigated in the city of Guangzhou in southern China. Samples of urban foliage near 36 pedestrian bridges were analyzed to determine their Zn, Pb, Cu, Cr, V, Ni, and Co contents after digestion in a mixture of strong acids composed of HNO₃, HCl, HF, and HClO₄. The results revealed a severe heavy metal pollution compared with the background levels in Chinese soils, except for Co and V. The mean concentrations of Zn (1,024 mg kg^?1), Pb (233 mg kg^?1), Cu (203 mg kg^?1), Cr (118 mg kg^?1), V (41.9 mg kg^?1), Ni (41.4 mg kg^?1), and Co (11.3 mg kg^?1) in urban dust were higher than the reference levels, and were highest in samples located near high-traffic areas. Multivariate statistical methods (correlation analysis, principal-components analysis, and clustering analysis) were used to identify the possible sources of the metals. Three main pollutant sources are assigned: Zn, Cu and Ni levels were strongly correlated and were possibly related to combustion processes and vehicles; Pb, Cr and Co were mainly derived from traffic sources, combined with soil sources; and V mainly originated from natural sources.     

Efficiency assessment of aerobic biological effluent treatment plant treating pharmaceutical effluents

The present paper undertakes a study of the physico-chemical properties and toxic heavy metals content in the untreated and treated pharmaceutical effluents in order to evaluate the working efficiency of industrial effluent treatment plants. The treatment efficiency achieved for various parameters was conductivity (79.94%), alkalinity (93.91%), hardness (87.70%), chloride (89.24%), cyanide (79.66%), phosphate (99.19%), total dissolved solids (85.89%), total suspended solids (96.87%), salinity (52.41%), dissolved oxygen (27.32%), biochemical oxygen demand (83.39%) and chemical oxygen demand (72.21%). The removal efficiency achieved for different heavy metals was Cu²⁺ (79.66%), Ni²⁺ (69.22%), Cr⁶⁺ (80.15%), Pb²⁺ (72.14%), Fe³⁺ (92.59%) and Zn²⁺ (90.61%). The level of biochemical oxygen demand (64 mg L^?1) in the treated effluents was above the limit of 30.0 mg L^?1, chemical oxygen demand level (208 mg L^?1) was close to a limit of 250 mg L^?1, while average Pb²⁺ concentration (0.10 mg L^?1) was on the borderline of maximum permissible limit of 0.10 mg L^?1 set by Central Pollution Control Board for safe discharge of industrial effluent in inland surface water. The average concentration of cyanide (0.01 mg L^?1) in the treated industrial effluent of our study is of great concern to the fisheries of freshwater ecosystem in which the effluents finally get discharged. Based on the results of the present study, it is concluded that the pollution level in the discharged pharmaceutical effluent is of the great concern requiring proper treatment and regular scientific monitoring so as to protect the environmental degradation of water resources and facilitate the propagation of the aquatic life.     

The diagenetic geochemistry and contamination assessment of iron,cadmium, and lead in the sediments from the Shuangtaizi estuary,China

Sediment and pore water samples have been collected from the coastal tidal flat in the Shuangtaizi estuary, China, in order to investigate the geochemical behavior of iron, cadmium, and lead during diagenesis and to assess the degree of contamination. The calculated enrichment factors and geoaccumulation indices for separate elements show that anthropogenic activities have had no significant influence on the distribution of Fe and Pb in the study area, whereas the distribution of Cd has been closely influenced in this way. The high percentage of exchangeable Cd (average of 56.34%) suggests that Cd represents a potential hazard to benthic organisms in the estuary. The calculated diffusive fluxes of metals show that the most mobilized metal is Fe (9.22 mg m^?2 a^?1), followed by Cd (0.54 mg m^?2 a^?1) and Pb (0.42 mg m^?2 a^?1). Low Fe²⁺ contents in surface pore water, alongside high chromium-reducible sulfur contents, and low acid-volatile sulfur, and elemental sulfur contents at 0–25 cm depth in sediments show that Fe²⁺ is formed by the reduction of Fe oxides and is transformed first to a solid phase of iron monosulfides (FeS) and eventually to pyrite (FeS₂). The release of adsorbed Pb due to reductive dissolution of Fe/Mn oxides during early diagenesis could be a source of Pb²⁺ in pore water. From the relatively low total organic carbon contents measured in sediments (0.46–1.28%, with an average of 0.94%) and the vertical variation of Cd²⁺ in pore water, sulfide or Fe/Mn oxides (instead of organic matter) are presumed to exert a significant influence on carrying or releasing Cd by the sediments.     

Phytoremediation assessment of native plants growing on Pb–Zn mine site in Northern Tunisia

Pollution by heavy metals presents an environmental concern, and their toxicity threats soil, water, animals and human health. Phytoremediation can be used as a solution to remediate contaminated soils. The aim of this study was to identify native plants collected from tailings: material of Pb–Zn mine sites of Fedj Lahdoum and Jebel Ressas (two abandoned mines located, respectively, in the northwest of Tunisia and in the south of Tunis City). The tolerance of plant to heavy metals (lead, zinc and cadmium) is evaluated. Soil samples were collected and analyzed for Pb, Zn and Cd concentration. The total soil Pb, Zn and Cd are, respectively, reached 6132 mg kg^?1, 11,052 mg kg^?1 and it doesn’t exceed 479 mg kg^?1 for Cd. The highest content of Zn in plants was detected in shoots of Rumex bucephalophorus (1048 mg kg^?1), and the highest Pb concentration was detected in roots of Chrysopogon zizanioides (381 mg kg^?1), while for Cd Silene colorata it accumulated the highest content in roots (51 mg kg^?1). From all plants, only 12 have a translocation factor for Pb which is higher than one. Among all plants, only 17 have a translocation factor that is higher than one for Zn, while for Cd only 13 plants indicate TF > 1. As for the biological absorption coefficient, all samples indicate a rate which is lower than one. These plants can be primarily hyper accumulators and useful in remediation of lead- and zinc-contaminated soils after further biochemistry researches in mechanism of accumulation and translocation of heavy metals in plants.     

Mapping groundwater quality for irrigation in Punjab, North-West India, using geographical information system

The state of Punjab—a part of the Indus basin of the Indian subcontinent has an excellent net work of irrigation facilities. However, due to intensive cultivation it is facing a major problem with respect to quality of groundwater for irrigation. In the present investigation, geo-referenced groundwater samples were analysed to map water quality using geographical information system. Electrical conductivity varied from 0.418 to 5.754 dS m^?1 with an average of 1.365 dS m^?1. The carbonate ranged between 0 and 120 mg L^?1, whereas bicarbonate ranged from 5 to 1,000 mg L^?1. Chloride varied from 7 to 2,347 mg L^?1. Calcium plus magnesium ranged from 12 to 1,216 mg L^?1 with a mean value of 169 mg L^?1. Sodium adsorption ratio ranged between 0.0 and 34.78 with an average of 2.66 meq L^?1/2. Residual sodium carbonate varied from 0 to 21.30 meq L^?1 with a standard deviation of 2.24. The Geographic Information System (GIS)-based mapping indicated that water in suitable category spatially covered 45.7 % of the state which is located mostly in the sub-mountain (Siwalik Hills), north-eastern undulating and piedmont and alluvial plain agro-eco-subregions. Marginally suitable groundwater spatially covered 46.1 % in the central alluvial plain and south-western alluvial plain agro-eco-subregions. Unsuitable groundwater covered 8.2 % of the state, mostly in the erstwhile sodic soils areas in the central alluvial plain and south-western alluvial plain agro-eco-subregions. GIS-based maps are effective in identifying hot spots which need immediate attention and call for strategic planning for sustainable management.     

Isolation of <Emphasis Type="Italic">Virgibacillus</Emphasis> sp. strain KU4 from agricultural soil as a potential degrader of endocrine disruptor bisphenol-A

Bisphenol-A is one of the highest volumes of chemicals produced worldwide and released into the atmosphere each year. Recent extensive literature has raised concerns about its possible endocrine-disrupting effect in animals and humans. A bacterium having high tolerance of bisphenol-A (1000 mg L^?1) was isolated from agriculture soil of Coimbatore District, Tamil Nadu, India, and identified as Virgibacillus sp. KU4 by 16S ribosomal RNA sequence analysis. Bisphenol-A removal efficiency of this strain was measured as greater than 92% at seventh day of incubation in a basal mineral medium supplemented with 1000 mg L^?1 at seventh day. Gas chromatography analysis showed that 1000 mg L^?1 BPA in distilled water was degraded by the Virgibacillus sp. KU4 in an efficient way. A 70 ± 3% bisphenol-A degradation was observed in the suspended cell pellet-mediated degradation study, where distilled water supplemented with 1000 mg L^?1 bisphenol-A was sole carbon and energy source for bacterial growth. Further, Virgibacillus sp. KU4 is expected to be a candidate as a biological cleaner of BPA in the environment.     

Enhancing somatic embryogenesis of Malaysian rice cultivar MR219 using adjuvant materials in a high-efficiency protocol

Enhancing of the efficient tissue culture protocol for somatic embryos would facilitate the engineered breeding plants program. In this report, we describe the reproducible protocol of Malaysian rice (Oryza sativa L.) cultivar MR219 through somatic embryogenesis. Effect of a wide spectrum of exogenesis materials was assessed in three phases, namely callogenesis, proliferation and regeneration. Initially, rice seeds were subjected under various auxin treatments. Secondly, the effect of different concentrations of 2,4-D on callus induction was evaluated. In the next step, the efficiency of different explants was identified. Subsequently, the effects of different auxins, cytokinins, l-proline, casein hydrolysate and potassium metasilicate concentrations on the callus proliferation and regeneration were considered. For the callogenesis phase, 2 mg L^?1of 2,4-D and roots were chosen as the best auxin and explant. In the callus proliferation stage, the highest efficiency was observed at week eight in the MS media supplemented with 2 mg L^?1 of 2,4-D, 2 mg L^?1 of kinetin, 50 mg L^?1 of l-proline, 100 mg L^?1 of casein hydrolysate and 30 mg L^?1 of potassium metasilicate. In the last phase of the research, the MS media added with 3 mg L^?1 of kinetin, 30 mg L^?1of potassium metasilicate and 2 mg L^?1 of NAA were selected. Meanwhile, to promote the roots of regenerated explants, 0.4 mg L^?1 of IBA has shown potential as an appropriate activator.     

Chemometric analysis of <Superscript>137</Superscript>Cs activity and heavy metals distribution in the Tatras’ soil

The goal of the paper was to determine the activity of ¹³⁷Cs and ⁴⁰K radionuclides as well as heavy metals Zn, Cr, Pb in soil samples taken from the Tatra National Park in the south of Poland. The samples were obtained as cores (10 cm in diameter) from the top 10-cm layer of the soil. Each sample was divided into three subsamples (a, b and c), where a was the subsample closest to the surface and c was the deepest one. Activity of the radionuclides was determined by means of gamma spectrometry, while analysis of heavy metals was performed (after microwave digestion) using atomic absorption spectrometry technique. The highest activity of cesium-137 was detected (5112 ± 120 Bq kg^?1) in the “a” layer of the core with the peak concentration of cesium-137 (14,452 ± 278 Bq m^?2) in the whole soil core. The highest detected concentration of heavy metals was: Zn—52.8 ± 4.4 mg kg^?1, Pb—260.1 ± 9.4 mg kg^?1, Cr—52.8 ± 4.4 mg kg^?1, respectively. Cluster analysis and principal component analysis were used to examine the obtained data. Application of statistical analysis tools allowed specifying the interdependencies between the examined variables.     

Transformation of metal speciation in purple soil as affected by waterlogging

This study was conducted to investigate the effect of waterlogging on copper, lead and cadmium fractionation in Chinese purple soil. Heavy metals were added to purple soil at 80 % field capacity and waterlogging regimes as nitrate salts of 500 mg kg^?1 of copper and lead, and 5 mg kg^?1 of cadmium. Metals in the incubated soil samples were fractionated termly from 1 to 35 days by the sequential extraction procedure. Under both treatments, the heavy metals spiked in the soil were transformed slowly from the exchangeable fractions into more stable fractions, whereas their residual fractions barely changed. The transformation process of exchangeable fraction in soil was estimated by Elovich kinetic equation for the above incubation periods, and the constant B in Elovich equation was applied to reflect the transformation rates of metal speciation. It was found that waterlogging incubation could immobilize heavy metals, resulting in decreased lability and availability of the metals in purple soil. The effect of waterlogging on the redistribution of heavy metals in purple soil might be mainly related to the changes of pH, potential redox and hydrous oxides in varying soil-water systems.     

Chelate enhanced phytoremediation of soil containing a mixed contaminant

Greenhouse tests were conducted to study the effect of chelates on the phytoextraction of cadmium and lead, and the rhizodegradation of used engine oil present as a mixed contaminant in a sandy soil. Indian mustard plants were grown in test pot soil for 30 days and chelates ethylenediamine tetraacetic acid (EDTA) and ethylenediaminedisuccinic acid (EDDS) were individually applied to the test soil. The soil was spiked earlier with 50 mg kg^?1 of CdCl₂, 500 mg kg^?1 of PbCl₂ and 500 mg kg^?1 of used engine oil to form the mixed soil contaminant. At the same concentration of chelates, EDTA was found to be more effective than EDDS in increasing the concentration of metal contaminants Cd and Pb in the plant. Compared to EDDS, EDTA was also more effective in promoting rhizodegradation of the organic contaminant formed by used engine oil. The study demonstrated that the application of chelates to soils containing mixed contaminants such as heavy metals (Cd and Pb) and organics (used engine oil) can simultaneously assist metal accumulation at higher concentrations in the biomass of Indian mustard plant and also reduce the amount of used engine oil in the soil through rhizodegradation.     

Fluoride sorption and desorption on soils located in the surroundings of an aluminium smelter in Galicia (NW Spain)

Aluminium smelters are major sources of F emission to the environment. We studied, in laboratory experiments, the sorption and desorption of fluoride on organic and mineral horizons of soils located within 2 km from one of these factories, situated in the northern coast of Galicia (NW Spain). The soils, developed from granite, are acid (pH H₂O 3.9–5.5), rich in organic matter (4–16 % C in the A horizon) and most A horizons have high Al saturation in the exchange complex. All samples showed a notable F sorption, between 1,066 and 1,589 mg kg^?1, after adding 200 mg F L^?1, which accounts for 53–80 % of F added. The sorption was slightly higher in the A horizons than in the respective organic horizons (differences of up to 194 mg kg^?1). The fluoride sorption upon addition of 200 mg F L^?1 correlated significantly (p < 0.05) with soil pH in water (r = ?0.77), iron extracted by acid ammonium oxalate (r = 0.68), aluminium plus iron extracted by acid ammonium oxalate (r = 0.63), exchange aluminium (r = 0.52) and clay percentage in soil (r = 0.76). The F sorption fitted to both Langmuir and Freundlich models. Desorbed F accounted for only 12–22 % of sorbed fluoride and correlated (p < 0.05) negatively with non-crystalline (extracted by acid ammonium oxalate) Fe (r = ?0.51) and clay content (r = ?0.74) and positively with organic matter (r = 0.69) and with the effective cation exchange capacity of the soil (r = 0.50).     

The use of multivariate statistical analysis of geochemical data for assessing the spatial distribution of soil contamination by potentially toxic elements in the Aljustrel mining area (Iberian Pyrite Belt,Portugal)

Aljustrel mine is located in SW Portugal, in the western sector of the Iberian Pyrite Belt. The Aljustrel village was developed around the exploitations of massive polymetallic sulphides that occur in the area (4 orebodies mined, 2 in exploration phase). The pyrite ore was extensively exploited from 1850 to 1993, when production was discontinued. A mining restart occurred in 2008, only during a few months. The objectives of the study were to assess the levels of soil contamination, to determine associations between the different chemical elements and their spatial distribution, as well as to identify possible sources of contamination that can explain the spatial patterns of soil pollution in the area. Principal component analysis combined with spatial interpretation successfully grouped the elements according to their sources and provided evidence about their geogenic or anthropogenic origin. From this study, it is possible to conclude that soils around Algares/Feitais tailing deposits, Estéreis and Águas Claras mine dams and S. João mine show severe contamination. The highest concentrations of As (up to 3,936 mg kg^?1) and certain heavy metals (up to 321.7 mg kg^?1 for Bi, 5,414 mg kg^?1 for Cu, 20,000 mg kg^?1 for Pb, 980.6 mg kg^?1 for Sb, and 22 mg kg^?1 Cd) were obtained near Algares area while the highest concentration of Cd (up to 61.6 mg kg^?1) and Zn (up to 20,000 mg kg^?1) were registered in samples collected in the S. João area. The highest pollution load index (>4.0) was recorded at the Algares area where the metal concentrations exceed typical soil background levels by as much as two orders of magnitude.     

Removal of lead(II) from aqueous stream by hydrophilic modified kapok fiber using the Fenton reaction

A hydrophilic kapok fiber was prepared by a chemical process of the Fenton reaction and used as an adsorbent to remove Pb(II) from aqueous solution. The effects of experimental parameters including pH, contact time, Pb(II) concentration, and coexisting heavy metals were estimated as well as evaluated. The optimum concentrations of FeSO₄ and H₂O₂ for the Fenton reaction-modified kapok fiber (FRKF) were 0.5 mol L^?1 and 1 mol L^?1, respectively. The adsorption kinetic models and isotherm equations of Langmuir and Freundlich were conducted to identify the most optimum adsorption rate and adsorption capacity of Pb(II) on FRKF. The FRKF displayed an excellent adsorption rate for Pb(II) in single metal solution with the maximum adsorption capacity of 94.41?±?7.56 mg g^?1 at pH 6.0. Moreover, the FRKE still maintained its adsorption advantage of Pb(II) in the mixed metal solution. The FRKF exhibited a considerable potential in removal of metal content in wastewater streams.     

Sorption of lead by chemically modified rice bran

In this work, the effectiveness of native and chemically modified rice bran to remove heavy metal Pb(II) ions from aqueous solution was examined. Chemical modifications with some simple and low-cost chemicals resulted in enhancement of the adsorption capacities and had faster kinetics than native rice bran. Experiments were conducted in shake flasks to monitor the upshot of parameters over a range of pH, initial Pb(II) concentrations and contact times using a batch model study. The sorption capacities q (mg g^?1) increased in the following order: NaOH (147.78), Ca(OH)₂ (139.08), Al(OH)₃ (127.24), esterification (124.28), NaHCO₃ (118.08), methylation (118.88), Na₂CO₃ (117.12) and native (80.24). The utmost uptake capacity q (mg g^?1) was shown by NaOH-pretreated rice bran. The results showed that, using NaOH-modified rice bran, the chief removal of Pb(II) was 74.54 % at pH 5, primary Pb(II) concentration 100 mg L^?1 and contact time 240 min. Equilibrium isotherms for the Pb(II) adsorption were analyzed by Langmuir and Freundlich isotherm models. The Langmuir isotherm model, showing Pb(II) sorption as accessible through the high value of the correlation coefficient (R ² = 0.993), showed a q _max value of 416.61 mg g^?1. The kinetic model illustrated adsorption rates well, depicted by a second order, which gives an indication concerning the rate-limiting step. Thermodynamic evaluation of the metal ion ?G ^o was carried out and led to the observation that the adsorption reaction is spontaneous and endothermic in nature. NaOH chemically modified rice bran was a superb biosorbent for exclusion of Pb(II) and proved to be excellent for industrial applications.