The partitioning of radiated energy and the largest aftershock of seismic sequences occurred in the northeastern Italy and western Slovenia

We analyzed the most relevant seismic sequences that occurred from 1977 to 2007 in the Friuli-Venezia Giulia region (northeastern Italy) and western Slovenia. The eight aftershock sequences were triggered by low- to moderate-magnitude earthquakes with mainshock duration magnitude ranging from 3.7 to 5.6. The b-value of the Gutenberg–Richter law varies from 0.8 to 1.1. The modified Omori’s modeling of the sequences evidences values of the p exponent ranging from 0.8 to 1.0. Using the Reasenberg and Jones (Science 243:1173–1176, 1989; Science 265:1251–1252, 1994) approach, we computed the probabilistic estimate of the aftershock rates and the largest aftershock in given time intervals. The difference in magnitude between the mainshock and the largest aftershock is calculated according to the modified Båth law and using an approach that considers the partitioning of the radiated seismic energy between mainshock and aftershocks. The partitioning of the radiated seismic energy appears to play a significant role in the evolution of the sequences. We define the parameter R _ES as the ratio between the radiated seismic energy of the mainshock and the summation of the seismic energy radiated by the aftershocks. The difference in magnitude between the mainshock and the largest aftershock, calculated with the parameter R _ES, agrees well with the observed difference. In most sequences, the parameter R _ES decreases very quickly until the occurrence of the largest aftershock and then becomes constant. By analyzing the values of R _ES during the early hours following the mainshock, we found that the R _ES values after 24 h are well related to the final ones, calculated on the whole sequence, and to the differences in magnitude between the mainshock and the largest aftershock.     

Probabilistic aftershock hazard analysis,two case studies in West and Northwest Iran

Aftershock hazard maps contain the essential information for search and rescue process, and re-occupation after a main-shock. Accordingly, the main purposes of this article are to study the aftershock decay parameters and to estimate the expected high-frequency ground motions (i.e., Peak Ground Acceleration (PGA)) for recent large earthquakes in the Iranian plateau. For this aim, the Ahar-Varzaghan doublet earthquake (August 11, 2012; M _N =6.5, M _N =6.3), and the Ilam (Murmuri) earthquake (August 18, 2014 ; M _N =6.2) have been selected. The earthquake catalogue has been collected based on the Gardner and Knopoff (Bull Seismol Soc Am 64(5), 1363-1367, 1974) temporal and spatial windowing technique. The magnitude of completeness and the seismicity parameters (a,??b) and the modified Omori law parameters (P,??K,??C) have been determined for these two earthquakes in the 14, 30, and 60 days after the mainshocks. Also, the temporal changes of parameters (a,??b,??P,??K,??C) have been studied. The aftershock hazard maps for the probability of exceedance (33%) have been computed in the time periods of 14, 30, and 60 days after the Ahar-Varzaghan and Ilam (Murmuri) earthquakes. For calculating the expected PGA of aftershocks, the regional and global ground motion prediction equations have been utilized. Amplification factor based on the site classes has also been implied in the calculation of PGA. These aftershock hazard maps show an agreement between the PGAs of large aftershocks and the forecasted PGAs. Also, the significant role of b parameter in the Ilam (Murmuri) probabilistic aftershock hazard maps has been investigated.     

Scaling Analysis of Time Distribution between Successive Earthquakes in Aftershock Sequences

The earthquake inter-event time distribution is studied, using catalogs for different recent aftershock sequences. For aftershock sequences following the Modified Omori’s Formula (MOF) it seems clear that the inter-event distribution is a power law. The parameters of this law are defined and they prove to be higher than the calculated value (2–1/p). Based on the analysis of the catalogs, it is determined that the probability densities of the inter-event time distribution collapse into a single master curve when the data is rescaled with instantaneous intensity, R(t; M _th ), defined by MOF. The curve is approximated by a gamma distribution. The collapse of the data provides a clear view of aftershock-occurrence self-similarity.     

Determination of source parameters of strong earthquakes of Kamchatka,the Kurile Islands,and Japan from aftershock sequences

Aftershock sequences of some strong earthquakes of Kamchatka, the Kurile Islands, and Japan are examined. Such source parameters as the length L, along-dip width W, motion on fault D, and stress drop Δσ are determined from the aftershock sequences considered. The values of these parameters were obtained by the formal estimation of linear source parameters (lower bound estimates) and visually (upper bound estimates). The correlation dependences of the obtained parameters on the surface wave (M _S ) and seismic moment (M _W ) magnitudes are calculated.     

Influence of Solar Wind Plasma Parameters on the Intensity of Isolated Magnetospheric Substorms

Parameters of the interplanetary magnetic field and solar wind plasma during periods of 163 isolated substorms have been studied. It is shown that the solar wind velocity V and plasma density N remain approximately constant for at least 3 h before substorm onset Т _o and 1 h after Т _o . On average, the velocity of the solar wind exhibits a stable trend toward anticorrelation with its density over the whole data array. However, the situation is different if the values of V and N are considered with respect to the intensity of substorms observed during that period. With the growth of substorm intensity, quantified as the maximum absolute value of AL index, an increase in both the solar wind plasma velocity and density, at which these substorms appear, is obsreved. It has been found that the magnitude of the solar wind dynamic pressure P is closely related to the magnetosphere energy load defined as averaged values of the Kan–Lee electric field E_KL and Newell parameter dΦ/dt averaged for 1 h interval before Т _o . The growth of the dynamic pressure is accompanied by an increase in the load energy necessary for substorm generation. This interrelation between P and values of EKL and dΦ/dt is absent in other, arbitrarily chosen periods. It is believed that the processes accompanying increasing dynamic pressure of the solar wind result in the formation of magnetosphere conditions that increasingly impede substorm generation. Thus, the larger is P, the more solar wind energy must enter the Earth’s magnetosphere during the period of the growth phase for substorm generation. This energy is later released during the period of the substorm expansion phase and creates even more intense magnetic bays.     

Crustal Structure Along Sunda-Banda Arc Transition Zone from Teleseismic Receiver Functions

We analyzed receiver function of teleseismic events recorded at twelve Indonesian-GEOFON (IA-GE) broadband stations using nonlinear Neighbourhood Algorithm (NA) inversion and H-k stacking methods to estimate crustal thickness, V _p /V _s ratios and S-wave velocity structure along Sunda-Banda arc transition zone. We observed crustal thickness of 34–37 km in Timor Island, which is consistent with the previous works. The thick crust (> 30 km) is also found beneath Sumba and Flores Islands, which might be related to the arc-continent collision causing the thickened crust. In Timor and Sumba Islands, we observed high V _p /V _s ratio (> 1.84) with low velocity zone that might be associated with the presence of mafic and ultramafic materials and fluid filled fracture zone. The high V _p /V _s ratio observed at Sumbawa and Flores volcanic Islands might be an indication of partial melt related to the upwelling of hot asthenosphere material through the subducted slab.     

Shear Wave Velocity Estimates through Combined Use of Passive Techniques in a Tectonically Active Area

We made an attempt to assess the shear wave velocity values V _S and, to a lesser extent, the V _P values from ambient noise recordings in an array configuration. Five array sites were situated in the close proximity to borehole sites. Shear wave velocity profiles were modeled at these five array sites with the aid of two computational techniques, viz. spatial autocorrelation (SPAC) and H/V ellipticity. Out of these five array sites, velocity estimates could be reliably inferred at three locations. The shear wave velocities estimated by these methods are found to be quite consistent with each other. The computed V _S values up to 30 m depth are in the range from 275 to 375 m/s in most of the sites, which implies prevalence of a low velocity zone at some pocket areas. The results were corroborated by evidence of site geology as well as geotechnical information.     

Prestack migration velocity analysis based on simplified two-parameter moveout equation

Stacking velocity V _C2, vertical velocity ratio γ ₀, effective velocity ratio γ _eff, and anisotropic parameter χ _eff are correlated in the PS-converted-wave (PS-wave) anisotropic prestack Kirchhoff time migration (PKTM) velocity model and are thus difficult to independently determine. We extended the simplified two-parameter (stacking velocity V _C2 and anisotropic parameter k _eff) moveout equation from stacking velocity analysis to PKTM velocity model updating and formed a new four-parameter (stacking velocity V _C2, vertical velocity ratio γ ₀, effective velocity ratio γ _eff, and anisotropic parameter k _eff) PS-wave anisotropic PKTM velocity model updating and process flow based on the simplified two-parameter moveout equation. In the proposed method, first, the PS-wave two-parameter stacking velocity is analyzed to obtain the anisotropic PKTM initial velocity and anisotropic parameters; then, the velocity and anisotropic parameters are corrected by analyzing the residual moveout on common imaging point gathers after prestack time migration. The vertical velocity ratio γ ₀ of the prestack time migration velocity model is obtained with an appropriate method utilizing the P- and PS-wave stacked sections after level calibration. The initial effective velocity ratio γ _eff is calculated using the Thomsen (1999) equation in combination with the P-wave velocity analysis; ultimately, the final velocity model of the effective velocity ratio γ _eff is obtained by percentage scanning migration. This method simplifies the PS-wave parameter estimation in high-quality imaging, reduces the uncertainty of multiparameter estimations, and obtains good imaging results in practice.     

The 2014 Kefalonia Doublet (<Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript>6.1 and <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript>6.0), Central Ionian Islands,Greece: Seismotectonic Implications along the Kefalonia Transform Fault Zone

The 2014 Kefalonia earthquake sequence started on 26 January with the first main shock (M_W6.1) and aftershock activity extending over 35 km, much longer than expected from the causative fault segment. The second main shock (M_W6.0) occurred on 3 February on an adjacent fault segment, where the aftershock distribution was remarkably sparse, evidently encouraged by stress transfer of the first main shock. The aftershocks from the regional catalog were relocated using a 7-layer velocity model and station residuals, and their distribution evidenced two adjacent fault segments striking almost N-S and dipping to the east, in full agreement with the centroid moment tensor solutions, constituting segments of the Kefalonia Transform Fault (KTF). The KTF is bounded to the north by oblique parallel smaller fault segments, linking KTF with its northward continuation, the Lefkada Fault.     

A discussion on corioli force effect and aftershock activity tendency of the <Emphasis Type="Italic">M</Emphasis>=8.1 Kunlun Mountain Pass earthquake on Nov. 14, 2001

Following the theory and definition of the Corioli force in physics, the Corioli force at the site of the M=8.1 Kunlun Mountain Pass earthquake on November 14, 2001, is examined in this paper on the basis of a statistical research on relationship between the Corioli force effect and the maximum aftershock magnitude of 20 earthquakes with M≥7.5 in Chinese mainland, and then the variation tendency of aftershock activity of the M=8.1 earthquake is discussed. The result shows: a) Analyzing the Corioli force effect is an effective method to predict maximum aftershock magnitude of large earthquakes in Chinese mainland. For the sinistral slip fault and the reverse fault with its hanging wall moving toward the right side of the cross-focus meridian plane, their Corioli force pulls the two fault walls apart, decreasing frictional resistance on fault plane during the fault movement and releasing elastic energy of the mainshock fully, so the maximum magnitude of aftershocks would be low. For the dextral slip fault, its Corioli force presses the two walls against each other and increases the frictional resistance on fault plane, prohibiting energy release of the mainshock, so the maximum magnitude of aftershocks would be high. b) The fault of the M=8.1 Kunlun Mountain earthquake on Nov. 14, 2001 is essentially a sinistral strike-slip fault, and the Corioli force pulled the two fault walls apart. Magnitude of the induced stress is about 0.06 MPa. After a comparison analysis, we suggest that the aftershock activity level will not be high in the late period of this earthquake sequence, and the maximum magnitude of the whole aftershocks sequence is estimated to be about 6.0.     

Simulation of spatial and temporal properties of aftershocks by means of the fiber bundle model

The rupture processes of any heterogeneous material constitute a complex physical problem. Earthquake aftershocks show temporal and spatial behaviors which are consequence of the heterogeneous stress distribution and multiple rupturing following the main shock. This process is difficult to model deterministically due to the number of parameters and physical conditions, which are largely unknown. In order to shed light on the minimum requirements for the generation of aftershock clusters, in this study, we perform a simulation of the main features of such a complex process by means of a fiber bundle (FB) type model. The FB model has been widely used to analyze the fracture process in heterogeneous materials. It is a simple but powerful tool that allows modeling the main characteristics of a medium such as the brittle shallow crust of the earth. In this work, we incorporate spatial properties, such as the Coulomb stress change pattern, which help simulate observed characteristics of aftershock sequences. In particular, we introduce a parameter (P) that controls the probability of spatial distribution of initial loads. Also, we use a “conservation” parameter (π), which accounts for the load dissipation of the system, and demonstrate its influence on the simulated spatio-temporal patterns. Based on numerical results, we find that P has to be in the range 0.06 < P < 0.30, whilst π needs to be limited by a very narrow range (0.60 < π < 0.66) in order to reproduce aftershocks pattern characteristics which resemble those of observed sequences. This means that the system requires a small difference in the spatial distribution of initial stress, and a very particular fraction of load transfer in order to generate realistic aftershocks.     

Site Specific Ground Motion Modeling and Seismic Response Analysis for Microzonation of Baku,Azerbaijan

We investigated ground response for Baku (Azerbaijan) from two earthquakes of magnitude M6.3 occurred in Caspian Sea (characterized as a near event) and M7.5 in Shamakhi (characterized as a remote extreme event). S-wave velocity with the average shear wave velocity over the topmost 30 m of soil is obtained by experimental method from the V _P values measured for the soils. The downtown part of Baku city is characterized by low V_S30 values (< 250 m/s), related to sand, water-saturated sand, gravel-pebble, and limestone with clay. High surface PGA of 240 gal for the M7.5 event and of about 190 gal for the M6.3 event, and hence a high ground motion amplification, is observed in the shoreline area, through downtown, in the north-west, and in the east parts of Baku city with soft clays, loamy sands, gravel, sediments.     

Limits of transversely isotropic elastic parameters for the existence of classical Rayleigh waves

Solutions of P-SV equations of motion in a homogeneous transversely isotropic elastic layer contain a factor exp(±ν _j z), where z is the vertical coordinate and j?=?1, 2. For computing Rayleigh wave dispersion in a multi-layered half space, ν _j is computed at each layer. For a given phase velocity (c), ν _j becomes complex depending on the transversely isotropic parameters. When ν _j is complex, classical Rayleigh waves do not exist and generalised Rayleigh waves propagate along a path inclined to the interface. We use transversely isotropic parameters as α _H , β _V , ξ, ? and η and find their limits beyond which ν _j becomes complex. It is seen that ν _j depends on ? and η, but does not depend on ξ. The complex ν _j occurs when ? is small and η is large. For a given c/β _V , the region of complex ν _j in a ? -η plane increases with the increase of α _H /β _V . Further, for a given α _H /β _V , the complex region of ν _j increases significantly with the decrease of c/β _V . This study is useful to compute dispersion parameters of Rayleigh waves in a layered medium.     

Force reduction factors for steel buildings with welded and post-tensioned connections

The seismic responses of steel buildings with perimeter moment resisting frames (MRF) with welded connections (WC) are estimated and compared to those of similar buildings with semi-rigid post-tensioned connections (PC). The responses are estimated in terms of ductility reduction factors (R _µ,), ductility demands (µ _G ) and force reduction factors (R). Two steel model buildings, which were modeled as complex-3D-MDOF systems, were used in the study. Results indicate that the reduction magnitude of global response parameters is larger than that of local response parameters, contradicting the same reduction implicitly assumed in the static equivalent lateral force procedure, implying that non-conservative design may result. The value of 8 for R, suggested in many codes for ductile steel MRF, and the value of 1 suggested in the well known Newmark and Hall procedure for the ratio of R to µ _G , cannot be justified. The reason for this is that SDOF systems were used to model actual structures, where higher mode effects, energy dissipation and structural overstrength weren’t explicitly considered. The codes should be more transparent regarding the magnitude and the components involved in the force reduction factors. The seismic performance of steel buildings with PC may be superior to that of the buildings with WC, since their force reduction factors are larger and their ductility demands smaller, implying that PC buildings could be designed for smaller lateral seismic forces. The conclusions of this paper are for the particular structural systems and models considered. Much more research is needed to reach more general conclusions.     

G: Fracture energy,friction and dissipation in earthquakes

Recent estimates of fracture energy G ^′ in earthquakes show a power-law dependence with slip u which can be summarized as G ^′ ∝ u ^a where a is a positive real slightly larger than one. For cracks with sliding friction, fracture energy can be equated to G _f : the post-failure integral of the dynamic weakening curve. If the dominant dissipative process in earthquakes is friction, G ^′ and G _f should be comparable and show a similar scaling with slip. We test this hypothesis by analyzing experiments performed on various cohesive and non-cohesive rock types, under wet and dry conditions, with imposed deformation typical of seismic slip (normal stress of tens of MPa, target slip velocity > 1 m/s and fast accelerations ≈ 6.5 m/s²). The resulting fracture energy G _f is similar to the seismological estimates, with G _f and G ^′ being comparable over most of the slip range. However, G _f appears to saturate after several meters of slip, while in most of the reported earthquake sequences, G ^′ appears to increase further and surpasses G _f at large magnitudes. We analyze several possible causes of such discrepancy, in particular, additional off-fault damage in large natural earthquakes.     

Testing the reference Moon model in respect of the thermal regime and chemical composition of the mantle: Thermodynamics versus seismology

The VPREMOON seismic reference Moon model (Garcia et al., 2011) has been tested with respect to the thermal regime and chemical composition of the mantle. Based on a self-consistent thermodynamic approach and petrological models of the lunar mantle covering a wide range of concentrations of CaO, Al₂O₃, and FeO, we convert the P- and S-wave velocity profiles to the temperature–depth profiles. The solution procedure relies on the method of the Gibbs free energy minimization and the equations of state for the mantle material which take into account the effects of phase transformations, anharmonicity, and anelasticity. We find that regardless of the chemical composition, the positive P- and S-wave velocity gradient in the lunar mantle leads to a negative temperature gradient, which has no physical basis. For adequate mantle temperatures, the P- and S-wave velocities should remain almost constant or slightly decrease with depth (especially V_S) as a result of the effects of the temperature, which grows faster than pressure. These findings underscore the importance of the relationship of the thermodynamics and physics of minerals with seismology.     

Shear wave velocity-based evaluation and design of stone column improved ground for liquefaction mitigation

The evaluation and design of stone column improvement ground for liquefaction mitigation is a challenging issue for the state of practice. In this paper, a shear wave velocity-based approach is proposed based on the well-defined correlations of liquefaction resistance (CRR)-shear wave velocity (V _s)-void ratio (e) of sandy soils, and the values of parameters in this approach are recommended for preliminary design purpose when site specific values are not available. The detailed procedures of pre- and post-improvement liquefaction evaluations and stone column design are given. According to this approach, the required level of ground improvement will be met once the target V _s of soil is raised high enough (i.e., no less than the critical velocity) to resist the given earthquake loading according to the CRR-V _s relationship, and then this requirement is transferred to the control of target void ratio (i.e., the critical e) according to the V _s-e relationship. As this approach relies on the densification of the surrounding soil instead of the whole improved ground and is conservative by nature, specific considerations of the densification mechanism and effect are given, and the effects of drainage and reinforcement of stone columns are also discussed. A case study of a thermal power plant in Indonesia is introduced, where the effectiveness of stone column improved ground was evaluated by the proposed V _s-based method and compared with the SPT-based evaluation. This improved ground performed well and experienced no liquefaction during subsequent strong earthquakes.     

Generation of superDreicer electric fields in the solar chromosphere

The electric field generation at the front of the current pulse, which originates in a coronal magnetic loop owing to the development of the Rayleigh–Taylor magnetic instability at loop footpoints, has been considered. During the τ_A ≈ l/V _A ≈ 5?25 s time (where l is the plasma plume height entering a magnetic loop as a result of the Rayleigh–Taylor instability), a disturbance related to the magnetic field tension B _?(r,t), “escapes” the instability region with the Alfvén velocity in this case. As a result, an electric current pulse I_z(z ? V _A t), at the front of which an induction magnetic field E _z, which is directed along the magnetic tube axis and can therefore accelerate particles, starts propagating along a magnetic loop with a characteristic scale of Δξ ≈ l. In the case of sufficiently large currents, when B _? ²/8π > p, an electric current pulse propagates nonlinearly, and a relatively large longitudinal electric field originates E _z ≈ 2I _z ³ V _A/c ⁴a²B_z ²l, which can be larger than the Dreicer field, depending on the electric current value.     

DHI evaluation by combining rock physics simulation and statistical techniques for fluid identification of Cambrian-to-Cretaceous clastic reservoirs in Pakistan

The use of seismic direct hydrocarbon indicators is very common in exploration and reservoir development to minimise exploration risk and to optimise the location of production wells. DHIs can be enhanced using AVO methods to calculate seismic attributes that approximate relative elastic properties. In this study, we analyse the sensitivity to pore fluid changes of a range of elastic properties by combining rock physics studies and statistical techniques and determine which provide the best basis for DHIs. Gassmann fluid substitution is applied to the well log data and various elastic properties are evaluated by measuring the degree of separation that they achieve between gas sands and wet sands. The method has been applied successfully to well log data from proven reservoirs in three different siliciclastic environments of Cambrian, Jurassic, and Cretaceous ages. We have quantified the sensitivity of various elastic properties such as acoustic and extended elastic (EEI) impedances, elastic moduli (K _sat and K _sat–μ), lambda–mu–rho method (λρ and μρ), P-to-S-wave velocity ratio (V _P/V _S), and Poisson’s ratio (σ) at fully gas/water saturation scenarios. The results are strongly dependent on the local geological settings and our modeling demonstrates that for Cambrian and Cretaceous reservoirs, K _sat–μ, EEI, V _P/V _S, and σ are more sensitive to pore fluids (gas/water). For the Jurassic reservoir, the sensitivity of all elastic and seismic properties to pore fluid reduces due to high overburden pressure and the resultant low porosity. Fluid indicators are evaluated using two metrics: a fluid indicator coefficient based on a Gaussian model and an overlap coefficient which makes no assumptions about a distribution model. This study will provide a potential way to identify gas sand zones in future exploration.