Using regression model to identify and evaluate heavy metal pollution sources in an open pit coal mine area,Eastern Junggar,China

This study aims at identifying multi-source heavy metal pollution from natural and anthropogenic sources using a regression model, principal component analysis, and five different indices (geo-accumulation index (I _geo), the modified degree of contamination, pollution load index (PLI), enrichment factor, and ecological risk factor. Results revealed that: (1) although the average concentrations of soil heavy metals (Cu, Cr, Pb, Hg, As, Zn) were generally low, Hg, As, and Cr concentrations exceeded national standard values by approximately 0.91, 1.84, and 0.91 times with maximum concentrations up to 0.41, 78.6, and 175.2 μg/g, respectively; (2) PLI results showed that the industrial park and Wucaiwan open coal mining area were the most polluted (PLI of 1.98, 1.71). The potential ecological hazards index indicated that the E _i ^r of three heavy metals (Cu, Hg, As) in the soil were relatively high, presenting potential ecological risk factors of 74.89, 16.71, 4.15%, respectively; (3) stepwise regression model and principal component analysis suggest that Cu and Zn were primarily effected by the natural geological condition and atmospheric dust fall. Cr, Hg, Pb are mainly derived from anthropogenic sources, particularly coal mining activities and industrial sources. Results of this research have some significant implications for heavy metal pollution prevention and the sustainable development of the economy and ecology of arid regions in China.     

Contamination and ecological risk assessment of heavy metals in street dust of Tehran,Iran

Heavy metals are introduced in human tissue through breathing air, food chain and human skin. They can cause damage to the nervous system and internal organs. In the present study, sixty street dust samples were collected from the central area of Tehran and were digested in the laboratory to determine the content of Zn, Ni, Cd, Cr, Cu and Pb, using inductively coupled plasma optical emission spectrometry (ICP-OES). The level of contamination with the analyzed metals was determined according to the following indices: geo-accumulation index (I _geo), enrichment factor (EF), pollution index (PI), integrated pollution index (IPI) and potential ecological risk index (RI). The average concentration of heavy metals found was in the order of Zn > Cu > Pb > Ni > Cr > Cd. The average I _geo values for Cd, Cr, Cu, Ni, Pb and Zn were 1.53, ?1.88, 2.68, ?0.67, 1.62 and 2.70, respectively. Among the investigated heavy metals, zinc and copper had the maximum average EF values and were placed into the “very severe enrichment” class. Potential ecological risk factor (E _r) also indicated that Cd had the highest risk, and it was classified as of considerable potential ecological risk. Therefore, it is necessary to pay more attention to the appearance of Cd in the human environment. The calculated potential ecological risk index values also illustrated that the street dust samples presented a “moderate ecological risk.” The calculated IPI values showed that the pollution levels of the street dust samples ranged from high to extremely high.     

<Emphasis Type="Italic">Robinia pseudoacacia</Emphasis> and <Emphasis Type="Italic">Melandrium album</Emphasis> in trace elements biomonitoring and air pollution tolerance index study

The accumulation efficiency of selected trace elements in the leaves of Melandrium album and Robinia pseudoacacia grown on heavy metal contaminated sites in comparison with a non-contaminated one was evaluated. The study was undertaken to calculate air pollution tolerance index and to determine the contents of selected metabolites: glutathione, non-protein thiols, ascorbic acid, chlorophyll and the activity of antioxidant enzymes: guaiacol peroxidase and superoxide dismutase. Such estimations can be useful in better understanding of plants defense strategies and potential to grow in contaminated environments. The results in the most contaminated site revealed higher contents of metals in M. album leaves, especially Zn, Cd and Pb (3.4, 6 and 2.3 times higher, respectively) in comparison with the R. pseudoacacia. Better accumulation capacity found in M. album was shown by metal accumulation index values. The plants could be used as indicators of Zn, Cd (both species) and Pb (M. album) in the soil. Glutathione content (in both species) and peroxidase activity (in M. album), general markers of heavy metals contamination, were increased in contaminated sites. In most cases in contaminated areas R. pseudoacacia had decreased ascorbic acid and chlorophyll levels. Opposite tendency was recorded in M. album leaves, where similar or higher contents of the above-mentioned metabolites were found. In our study, M. album and R. pseudoacacia proved to be sensitive species with the air pollution tolerance index lower than 11 and can be recommended as bioindicators.     

Assessment of potential sediment contamination using screening methods (XRF,TGA/MS) taking into account principles of green chemistry,Eastern Slovakia

Mining and milling of metal ores coupled with industries have bequeathed many countries the legacy of wide distribution of metal contaminants in sediments. The aim of this study was to assess potential sediment contamination via useful screening methods (XRF, CHNS, TGA/MS). The sediments were collected from the water reservoir Krompachy Eastern Slovakia in April 2015. Within the frame of evaluation it was found that the concentrations of the study elements (Cu, Zn, As, Pb, Cr, Ni, Cd) exceeded some of the MPC, TV and IV values. Sample c was the most polluted by metals, which evident according to it’s the highest CHNS proportion as well as the highest clay and silt proportion. In the samples studied the best correlation was confirmed between weight losses in the temperature range (400–620 °C) and the following metal concentrations: Cu (r = 0.89), Zn (r = 0.88), As (r = 0.93), Hg (r = 0.83), Pb (r = 0.87). The greatest proportions of m/z 44, m/z 18 were detected at temperatures (400–620 °C) associated with decomposition of minerals such as siderite, barite, and exothermic loss of more refractory aromatic C took also place.     

Distribution of REE,LILE, and HFSE between biotite,feldspar, and the melt in the granulite facies migmatite,nimnyr block,Aldan shield

The behavior of trace elements under conditions of partial melting of granitoid rocks has been studied. The element’s partition coefficients between minerals and the melt D_i^min/melt depends, in the first place, on the composition of the primary melt. In biotite the HREE D_i are a little below 1, while those of LREE, especially D_i for Ce, are 1–3 orders of magnitude less. This leads to an efficient differentiation of REEs in anatexic melts especially when biotite is the main mineral phase of restite. On the contrary, there are feldspars, the D_i of which cannot provide such a magnitude of differentiation. Unlike garnets and pyroxenes, whose stability in restite permits enrichment of anatexic melts produced in migmatization zones with Nb, Ti, and Cr, the presence of biotite in restite causes depletion of melts with those elements as well as with Rb. Feldspars, under conditions of their fractional crystallization or during differentiation of an anatexic melt, deplete the latter with Sr, Ba, and Rb, but enrich it with Nb, Ti, Cr, Y, Zr, and V.     

Potential ecological risk assessment,enrichment, geoaccumulation,and source identification of metals in the surface sediments of Choghakhor Wetland,Iran

This study reported the first comprehensive research on identification of metal concentrations (Fe, Mg, Mn, Pb, Cd, Cr) in order to provide baseline data for future studies, identify possible sources, determine degree of pollution, and identify potential ecological risks of metals in surface sediments from Iran’s Choghakhor Wetland. The order of metal concentration was as follows: Fe > Mg > Mn > Pb > Cd > Cr, with mean concentrations of 6140.35, 1647.32, 289.03, 1.10, and 0.45 µg/g of dry weight, respectively. These results reveal that Choghakhor Wetland is not heavily polluted compared to other regions. The results of enrichment factor (EF) and geoaccumulation index (I _geo) showed that Fe, Pb, Mg, Cr, and Mn presented low levels of contamination and probably originated from natural sources. On the other hand, the results of EF and I _geo indices suggested that Cd concentrations in sediments of Choghakhor Wetland originated from anthropogenic sources. Based on the results of three sets of sediment quality guidelines, only Cd concentration in sediments of Choghakhor Wetland is a threat for aquatic organisms of Choghakhor Wetland. The results of multivariate analysis such as principal component analysis and cluster analysis showed that Fe–Mn, Cr–Mg, and Pb groups originated from natural sources, while Cd concentrations in sediments of Choghakhor Wetland originated from both natural and anthropogenic sources (mainly chemical fertilizers). To our knowledge, this is the first study about metal concentrations in sediments of Choghakhor Wetland, and because of low levels of these metals, these concentrations can be considered background levels for future investigation.     

Kinetics of DTPA extraction of Zn,Pb, and Cd from contaminated calcareous soils amended with sewage sludge

The aim of this study was to determine the influence of sewage sludge (SLU) amendment on the desorption characteristics of zinc (Zn), lead (Pb), and cadmium (Cd) in contaminated calcareous soils. Three levels of SLU (0, 1, and 3% w/w) were added to the two calcareous contaminated soils. Samples were incubated for 30 days and equilibrated with 0.005 M DTPA for 0.25 to 240 h. The addition of SLU significantly increased the amount of DTPA-extractable Zn in soils. While the amounts of Cd, Pb, dissolved organic carbon (DOC), and pH showed a significant increase only in 3% w/w of SLU, with the exception of Cd desorption in 1% w/w of SLU, kinetics of Zn, Pb, and Cd extraction increased together with an increase in the level of applied SLU. The best models for describing desorption data were explicitly power function and Elovich. The rate constants of Zn and Pb had significant correlations with DTPA-extractable Zn and Pb, DOC and pH, which affect Zn and Pb desorption. Also, the rate constants of Cd had significant correlations with CEC that can be deemed as equivalent to the fact that Cd desorption is controlled by surface adsorption, particularly in the lower sludge application amount. These results can be used for management of sewage sludge application in contaminated calcareous soils.     

High-resolution profiles of trace metals assessed by DGT techniques in lake sediment porewaters

The technique of diffusive gradients in thin films (DGT) was applied to obtain high-resolution vertical profiles of trace metals in sediment porewater of a eutrophic lake, Lake Chaohu. All sampling sediments were under anaerobic conditions with Eh values below 0, the redox potential profile in M4 was relatively stable, and higher Eh values in M4 than that in M1 were observed due to hydrodynamic effects. Fe, Mn and As exhibited closely corresponding profiles due to the co-release of Fe and Mn oxides and the reduction of As. Higher Fe and Mn concentrations and lower As concentrations were observed in M1 of the western half-lake than those in M4 of the eastern half-lake due to different sources and metal contamination levels in the two regions. Cu and Zn showed increasing concentrations similar to Mn and Fe at 1–2 cm depth of sediments, while DGT measured Co, Ni, Cd and Pb concentrations decreased down to 3–4 cm in the profiles. Co, Ni, Cu, Zn, Cd and Pb showed insignificant regional concentration variances in the western and eastern half-lakes. According to the R(C _DGT/C _{centrifugation}) values, the rank order of metal labilities decrease as follows: Fe (>1) > Cu, Pb, Zn (>0.9) > Co, Ni, Cd (>0.3) > Mn, As (>0.1).     

Heavy metal concentrations in roadside-deposited sediments in Kuwait city

In the present study, roadside-deposited sediment samples collected from Kuwait city district, in Kuwait, were analyzed for specific heavy metals (As, Cr, Cu, Mn, Ni, Pb, and Zn). Contamination assessment status of heavy metals in roadside sediments was made using mathematical models in terms of enrichment factor (EF), geoaccumulation index (I _geo), and contamination factor (CF). The sediments showed remarkably high levels of all the metals, except Ni, above background concentrations in the following order (As, Cu, Pb, Zn, Mn, and Cr). CF and I _geo revealed overall moderately uncontaminated and moderate contamination, respectively, but the EFs for all metals ranged between moderate and significant enrichment.     

Assessment of heavy metals in soil and terrestrial isopod <Emphasis Type="Italic">Porcellio laevis</Emphasis> in Tunisian industrialized areas

In this study, data on several metals (Cd, Pb, Zn and Cu) in soil and isopod Porcellio laevis taken at 21 sites from the most important industrial areas in Tunisia (Bizerte, Nabeul, Zaghouan, Sfax and Gabes) were presented. Heavy metal concentrations in both soil samples and isopods were determined using atomic absorption spectrometry. Soil contamination was estimated using the contamination factor (CF). On the other hand, the bioaccumulation factor (BAF) was determined to estimate metal accumulation in isopods. The CF values show that the level of contamination varies between sampled soils, which may be due to the source of pollution at each site. The BAF values allow defining the order of accumulation in P. laevis which was classified for the majority of the sampled sites as a macro-concentrator of Cu and Zn and a deconcentrator of Cd with some exceptions. A principal component analysis (PCA) was conducted between soil properties (pH, OM and CaCO₃) and metal concentrations in soils. Through PCA, we obtained four groups in which soils were distinguished by their physicochemical properties and their metal concentrations. Moreover, linear multiple regressions with a downward stepwise procedure were conducted to test the relationships between the physicochemical parameters and metal concentrations in both soils and isopods. Thus, positive correlations (0.78 < R ² < 0.99) were obtained for Pb considering dataset from the groups 1, 2 and for Zn with data of groups 2 and 3. Finally, results showed that P. laevis could be used as a bio-indicator for monitoring and reducing the impact of pollution in terrestrial ecosystems.     

Assessment of pollution levels and human health risk of heavy metals in dust deposited on Yerevan’s tree leaves (Armenia)

The total concentrations of Cd, As, Pb, Cr, Ni, Co, Zn, Cu, Ag, Hg, and Mo were determined in the atmospheric dust of the city of Yerevan by atomic absorption spectrometry (AAnalyst PE 800). Heavy metal pollution levels were evaluated by calculating geo-accumulation (I _geo ) and summary pollution (Z_c) indices. Potential human health risk was assessed using the United States Environmental Protection agency’s human health risk assessment model. The results show that mean contents of all elements tested except Ni and Cr were substantially higher than local geochemical background values. According to the I _geo , Yerevan territory is strongly-to-extremely polluted by As, Ag, Hg, Mo, and Cd. The Z_c assessment indicated that very high pollution was detected in 36 % of samples, high in 32 %, average in 12 %, and low in 20 %. The health risk assessment revealed a non-carcinogenic risk (HI >1) for children at 13 samplings sites and for adults at one sampling site. For children the risk was due to elevated levels of Mo, Cd, Co, and As, while for adults, only Mo. Carcinogenic risk (>1:1,000,000) of As and Cr via ingestion pathway was observed in 25 and 14 samples, respectively. This study, therefore, is the base for further detailed investigations to organize problematic site remediation and risk reduction measures.     

Assessment of heavy metal contamination levels of street dust in the city of Lublin,E Poland

Heavy metals are constantly emitted into the environment and pose a major threat to human health, particularly in urban areas. The threat is linked to the presence of Cd, Cr, Cu, Ni, Pb, and Zn in street dust, which consists of mineral and organic particles originating from the soil, industrial emitters, motor vehicles, and fuel consumption. The study objective was to determine the level of street dust contamination with trace metals in Lublin and to indicate their potential sources of origin. The analyses were carried out with an energy-dispersive X-ray fluorescence spectrometer. The sampling sites (49) were located within the city streets characterised by varying intensity of motor traffic. The following mean content values and their variation (SD) were determined: Cd: 5.1?±?1.7 mg kg^?1, Cr: 86.4?±?23.3 mg kg^?1, Cu: 81.6?±?69.2 mg kg^?1, Ni: 16.5?±?3.9 mg kg^?1, Pb: 44.1?±?16.4 mg kg^?1, and Zn: 241.1?±?94.6 mg kg^?1. The level of pollution was assessed with several widely used geochemical indices (geoaccumulation index, enrichment factor, pollution index, index of ecological risk, and potential ecological risk index). For most of the indices, the mean (median) values are arranged in the following manner: Zn?>?Cu(or Cd)?>?Pb?>?Ni?>?Cr. In general, street dust in Lublin does not show pollution with Cr, Ni, and Pb. I_geo and EF indices show moderate levels for Cu, Cd, and Zn; their presence in street dust is linked with anthropogenic factors (motor traffic). A significant threat is posed by Cd, and more than half of the samples show considerable pollution with cadmium (median for the index of ecological risk: 151). The spatial pattern of indices and the results of statistical analyses (CA, PCA) indicate three groups of elements: (1) Cr and Ni: natural origin; (2) Pb: mixed origin; and (3) Cd, Cu, and Zn: anthropogenic origin (mainly motor vehicle traffic). Higher content values for metals of anthropogenic origin in street dust indicate that it is a source of pollution of soil and air in the city.     

Evaluation of the removal of heavy metals in a natural wetland impacted by mining activities in Mexico

This research is focused on evaluating heavy metals (Cd, Cu, Fe, Mn, Pb, and Zn) uptake and removal by Eleocharis ovata, Cyperus manimae, Typha dominguensis, and Pteridium aquilinum in a natural wetland impacted by mining activities. We analyzed heavy metals content and distribution in native plants, soils, and water of a semipermanent natural wetland in Taxco de Alarcón, Guerrero, and we also determined the physicochemical characteristics of the water. Translocation factor (TF) and bioconcentration factor (BCF) were evaluated. Results showed that physical and chemical conditions are favorable for plants development. Correlation analysis showed a good and positive relation (0.95) between Cu and Pb in soils and plants. In the analyzed matrices: Zn (0.62–2.20 mg/L) exceeded the permissible limits in water, high concentrations of Pb and Zn (26.57–525.67 and 266.67–983.33 mg/kg, respectively) were detected in the studied soils, and Pb exceeded the normal range for E. ovata and P. aquilinum in the analyzed plants. Uptake of heavy metals in the tissues of different species was found in the following order: root > leaf. Data of TF and BCF showed that E. ovata is a tolerant plant with respect to heavy metals exposure since TF value was greater than 1. This study showed that E. ovata could be considered as a bioaccumulator of heavy metals in contaminated soils.     

Metal contamination of agricultural soils in the copper mining areas of Singhbhum shear zone in India

The study was intended to investigate the heavy metal contamination in the agricultural soils of the copper mining areas in Singhbhum shear zone, India. The total concentrations of the metals were determined by inductively coupled plasma-mass spectrometer (ICPMS). Pollution levels were assessed by calculating enrichment factor (EF), geo-accumulation index (\(I_\mathrm{geo}\)), contamination factors (CF), pollution load index (PLI), Nemerow index and ecological risk index (\(R_{I}\)). The metal concentrations in the soil samples exceeded the average shale values for almost all the metals. Principal component analysis resulted in extraction of three factors explaining 82.6% of the data variability and indicated anthropogenic contribution of Cu, Ni, Co, Cr, Mn and Pb. The EF and \(I_\mathrm{geo}\) values indicated very high contamination with respect to Cu followed by As and Zn in the agricultural soils. The values of PLI, \(R_{I}\) and Nemerow index, which considered the overall effect of all the studied metals on the soils, revealed that 50% of the locations were highly polluted with respect to metals. The pollution levels varied with the proximity to the copper mining and processing units. Consequently, the results advocate the necessity of periodic monitoring of the agricultural soils of the area and development of proper management strategies to reduce the metal pollution.     

Phytoremediation potential and morphological changes of plants growing in the vicinity of lead smelter plant

With the increasing industrialization, heavy metals concentration in soils has greatly increased. Phytoremediation is a low-cost, non-intrusive and aesthetically harmonious technology that uses plants to remediate contaminated sites by heavy metals. The aim of the study was to determine Cd, Pb and Zn concentration in the biomass of plant species growing on a multi-metal-contaminated site of lead smelter processing, to assess the workability of using these plants for phytoremediation purposes and highlight possible damage in morphological leaf changes. Two plant species, i.e., Ipomoea asarifolia and Urochloa decumbens and the associated soil samples were collected and analyzed Cd, Pb and Zn concentrations and then calculating the bioconcentration factor and translocation factor parameters for each element. Leaves and roots samples were observed by light microscopy. Metal concentrations varied greatly and majorly depend on site sampled, plant species and tissue. Cd, Pb and Zn in tissue ranged from 0 to 102.48, 0 to 381.04 and 12.84 to 295.02 mg Kg^?1. However, none of the plant showed potential for hyperaccumulation. Both plants showed bioaccumulation factor more than one, where it was 7.66 and 6.82 for Pb and Zn in U. decumbens, respectively. Translocation factor was calculated below one for both plants and all metals. Morphological studies revealed development of adaptive features that strengthen the U. decumbens to grow in contaminated soil. Our study suggests that I. asarifolia and U. decumbens have potential for phytostabilization at multi-metal-contaminated site.     

Heavy metal distribution and accumulation in the <Emphasis Type="Italic">Spartina alterniflora</Emphasis> from the Andong tidal flat,Hangzhou Bay,China

In order to study the heavy metal accumulation and distribution in the roots, stems, and leaves of Spartina alterniflora, we collected S. alterniflora samples and the associated sediments along three transects at the Andong tidal flat, Hangzhou Bay. Co, Ni, Cd, Pb, Cu, and Zn were mainly accumulated in the aerial parts (stems and leaves) of the plants, and their distributions depended on their mobility and their roles during the metabolism processes of S. alterniflora. The concentrations of Cu, Zn, Cd, Hg, and Pb were significantly enhanced with the increasing of heavy metal concentrations in the sediments, while those of Co and Ni remained relatively constant. Bioaccumulation factors results showed that the serious heavy metal contamination in the sediments from the transect A may overwhelm the accumulation capability of the plants. In addition, the physicochemical properties of the sediments and the pore water therein also play a role in the heavy metal concentrations and accumulations in the plants, because they can influence the behaviors and bioavailabilities of heavy metals during nutrition and bioaccumulation processes of the plants. The sediments with vegetation did not show significantly decreased heavy metal concentration with respect to the unvegetated sediments, although the plants did absorb heavy metals from the sediments. Principal component analysis and correlation analyses indicated that Co–Ni, Cu–Cd–Hg behaved coherently during accumulation, which may be ascribed to their similar accumulation mechanisms. This work provided essential information on the heavy metal accumulation by plants in a tidal flat, which will be useful for the environmental control through phytoremediation at estuaries.     

The mass of the compact object in the X-ray binary 4U 1700-37

The results of a systematic analysis of master radial-velocity curves for the X-ray binary 4U 1700-37 are presented. The dependence of the mass of the X-ray component on the mass of the optical component is derived in a Roche model based on a fit of the master radial-velocity curve. The parameters of the optical star are used to estimate the mass of the compact object in three ways. The masses derived based on information about the surface gravity of the optical companion and various observational data are 2.25 _?0.24 ^+0.23 M_⊙ and 2.14 _?0.56 ^+0.50 M_⊙. The masses based on the radius of the optical star, 21.9R_⊙, are 1.76 _?0.21 ^+0.20 M_⊙ and 1.65 _?0.56 ^+0.78 M_⊙. The mass of the optical component derived from the mass-luminosity relation for X-ray binaries, 27.4M_⊙, yields masses for the compact object of 1.41 _?0.08 ⁺ M_⊙ and 1.35 _?0.18 ^+0.18 M_⊙.     

Influence of the <Emphasis Type="Italic">X</Emphasis>-site composition on tourmaline’s crystal structure: investigation of synthetic K-dravite,dravite, oxy-uvite,and magnesio-foitite using SREF and Raman spectroscopy

The crystal structures of synthetic K-dravite [^XK^YMg ₃ ^Z Al ₆ ^T Si₆O₁₈(BO₃) ₃ ^V (OH) ₃ ^W (OH)], dravite [^XNa^YMg ₃ ^Z Al ₆ ^T Si₆O₁₈(BO₃) ₃ ^V (OH) ₃ ^W (OH)], oxy-uvite [^XCa^YMg ₃ ^Z Al ₆ ^T Si₆O₁₈(BO₃) ₃ ^V (OH) ₃ ^W O], and magnesio-foitite [^X?^Y(Mg₂Al)^ZAl ₆ ^T Si₆O₁₈(BO₃) ₃ ^V (OH) ₃ ^W (OH)] are investigated by polarized Raman spectroscopy, single-crystal structure refinement (SREF), and powder X-ray diffraction. The use of compositionally simple tourmalines characterized by electron microprobe analysis facilitates the determination of site occupancy in the SREF and band assignment in the Raman spectra. The synthesized K-dravite, oxy-uvite, and magnesio-foitite have significant Mg–Al disorder between their octahedral sites indicated by their respective average 〈Y–O〉 and 〈Z–O〉 bond lengths. The Y- and Z-site compositions of oxy-uvite (^YMg_1.52Al_1.48(10) and ^ZAl_4.90Mg_1.10(15)) and magnesio-foitite (^YAl_1.62Mg_1.38(18) and ^ZAl_4.92Mg_1.08(24)) are refined from the electron densities at each site. The Mg–Al ratio of the Y and Z sites is also determined from the relative integrated peak intensities of the Raman bands in the O–H stretching vibrational range (3250–3850 cm^?1), producing values in good agreement with the SREF data. The unit cell volume of tourmaline increases from magnesio-foitite (1558.4(3) ų) to dravite (1569.5(4)–1571.7(3) ų) to oxy-uvite (1572.4(2) ų) to K-dravite (1588.1(2) ų), mainly due to lengthening of the crystallographic c-axis. The increase in the size of the X-site coordination polyhedron from dravite (Na) to K-dravite (K) is accommodated locally in the crystal structure, resulting in the shortening of the neighboring O1–H1 bond. In oxy-uvite, Ca²⁺ is locally associated with a deprotonated W (O1) site, whereas vacant X sites are neighbored by protonated W (O1) sites. Increasing the size of the X-site-occupying ion does not detectably affect bonding between the other sites; however, the higher charge of Ca and the deprotonated W (O1) site in oxy-uvite are correlated to changes in the lattice vibration Raman spectrum (100–1200 cm^?1), particularly for bands assigned to the T ₆O₁₈ ring. The Raman spectrum of magnesio-foitite shows significant deviations from those of K-dravite, dravite, and oxy-uvite in both the lattice and O–H stretching vibrational ranges (100–1200 and 3250–3850 cm^?1, respectively). The vacant X site is correlated with long- and short-range changes in the crystal structure, i.e., deformation of the T ₆O₁₈ ring and lengthening of the O1–H1 and O3–H3 bonds. However, X-site vacancies in K-dravite, dravite, and oxy-uvite result only in the lengthening of the neighboring O1–H1 bond and do not result in identifiable changes in the lattice-bonding environment.     

Biogeochemical characteristics of dominant gastropod species from the stony littoral of southern Baikal

The trace element composition of dominant gastropod species from the littoral of southern Baikal was investigated. Both different mollusk species and their parts (shells and soft tissues) show specific trace element characteristics. The highest Sr and Ba contents were observed in Maackia herderiana. The highest Zn, Cu, and Cd and lowest Pb contents were detected in Megalovalvata baicalensis. Choanomphalus sp. shows high Mn and Ti and very low Sr, Cu, and Cd contents. Most of Cu, Zn, and Cd and a considerable fraction of Rb, Pb, Mo, Sc, Ce, W, Ga, Y, and Th are incorporated in the gastropod bodies. The maximum concentration of U is also characteristic of the body tissues. The foot tissues of Maackia herderiana and Megalovalvata baicalensis are depleted in the majority of elements compared with their bodies. Sr and Ba are prevalent in the mollusk shells, where high Mn contents were also detected. A close relationship was observed between the chemical compositions of the gastropods, stony substrate, and bottom water. Group concentration of trace elements is common in the species investigated. Relative to the bottom water layer, the gastropod species concentrate Ti, Mn, La, Co, Y, and V and show similarly low extraction of U, W, Mo, and Cs. Compared with the bottom sediments, the mollusks accumulate Sr. In addition, Maackia herderiana and Megalovalvata baicalensis accumulate Cd and Zn. Megalovalvata baicalensis is distinguished by the ability to concentrate Cu. The following sequence is formed by the gastropods with respect to their capacity to accumulate Cd, Zn, and Cu: Megalovalvata baicalensis > Maackia herderiana > Choanomphalus sp.     

Accumulation and phytostabilization of As,Pb and Cd in plants growing inside mine tailings reforested in Zacatecas,Mexico

The aim of this research was to identify plant species with potential to accumulate and stabilize arsenic (As), lead (Pb) and cadmium (Cd) in mine tailings reforested and naturally recolonized locations in a semiarid region of Zacatecas, Mexico. Plant shoots from 44 species and their rhizospheric soils were analyzed for As, Pb and Cd concentration using atomic absorption spectroscopy. Most represented plant families were Asteraceae, Poaceae, Fabaceae and Cactaceae. The highest concentrations in shoots were As, followed by Pb and Cd. Among herbaceous species, Bouteloua gracilis showed the highest bioconcentration factor (BCF) of As, while Plantago lanceolata showed the highest bioconcentration factor of Pb. The shrub species with highest concentration of As in the rhizospheric soil were Opuntia robusta, Melilotus alba, Baccharis neglecta and Arundo donax (near BCF to 1.0). Similar results were observed in trees Casuarina equisetifolia, Prosopis laevigata, Fraxinus uhdei and Eucalyptus globulus. In addition, Tillandsia recurvata showed a suitable indicator of atmospheric deposition to As. In general, the results suggest that these species can be effective for tailings reforestation with the possibility to enclose potentially toxic elements. Specially, C. equisetifolia which is abundant, having the potential for future applications in other contaminated sites with different types of mine tailings or abandoned mines from arid and semiarid zones.