Application of the extended Melnikov's method for single-degree-of-freedom vessel roll motion

Traditionally, when using Melnikov's method to analyze ship motions, the damping terms are treated as small. This is typically true for roll motion but not always true for other and/or multiple degrees of freedom. In order to apply Melnikov's method to other and/or multiple-degree-of-freedom motions, the small damping assumption must be addressed. In this paper, the extended Melnikov method is used to analyze ship motion without the constraint of small linear damping. Two roll motion models are analyzed here. One is a simple roll model with nonlinear damping and cubic restoring moment. The other is the model with biased restoring moment. Numerical simulations are investigated for both models. The effectiveness and accuracy of this method is demonstrated.     

The effect of nonlinear damping and restoring in ship rolling

Many researchers have studied a wide range of nonlinear equations of motion describing a ship rolling in waves. In this study, a form of nonlinear equation governing the motion of a rolling ship subjected to synchronous beam waves is suggested and solved by the generalized Duffing's method in the frequency domain. Various representations of damping and restoring terms found in the literature are investigated and their solutions are analyzed by the above-mentioned method. Comparative results of nonlinear roll responses are obtained for four distinct vessel types at resonance conditions which constitute the worst situation. The results indicate the importance of roll damping and restoring, when constructing a nonlinear roll model. An inappropriate selection of damping and restoring terms may lead to serious discrepancies with reality, especially in peak roll amplitudes.     

Study on coupling effects of ship motion and sloshing

This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope.     

Numerical simulation of ship stability for dynamic environment

The prediction of ship stability during the early stages of design is very important from the point of vessel’s safety. Out of the six motions of a ship, the critical motion leading to capsize of a vessel is the rolling motion. In the present study, particular attention is paid to the performance of a ship in beam sea. The linear ship response in waves is evaluated using strip theory. Critical condition in the rolling motion of a ship is when it is subjected to synchronous beam waves. In this paper, a nonlinear approach has been tried to predict the roll response of a vessel. Various representations of damping and restoring terms found in the literature are investigated. A parametric investigation is undertaken to identify the effect of a number of key parameters like wave amplitude, wave frequency, metacentric height, etc.     

Parameter identification of nonlinear roll motion equation for floating structures in irregular waves

In order to predict the roll motion of a floating structure in irregular waves accurately, it is crucial to estimate the unknown damping coefficients and restoring moment coefficients in the nonlinear roll motion equation. In this paper, a parameter identification method based on a combination of random decrement technique and support vector regression (SVR) is proposed to identify the coefficients in the roll motion equation of a floating structure by using the measured roll response in irregular waves. Case studies based on the simulation data and model test data respectively are designed to validate the applicability and validity of the identification method. Firstly, the roll motion of a vessel is simulated by using the known coefficients from literature, and the simulated data are used to identify the coefficients in the roll motion equation. The identified coefficients are compared with the known values to validate the applicability of the identification method. Then the roll motion is predicted by using the identified coefficients. The prediction results are compared with the simulated data, and good agreement is achieved. Secondly, the model test data of a FPSO are used to identify the coefficients in the roll motion equation. Then the random decrement signature of the roll motion is predicted by using the identified coefficients and compared with that obtained from the model test data, and satisfactory agreement is achieved. From this study, it is shown that the identification method can be effectively applied to identify the coefficients in the nonlinear roll motion equation in irregular waves.     

Recovering the functional form of the nonlinear roll damping of ships from a free-roll decay experiment: An inverse formulism

The purpose of this paper is to identify the functional form of the nonlinear roll damping for a particular ship based on an experiment. The problem of damping identification is formulated as an integral equation of the first kind. However, the solution of the problem lacks stability properties, due to the ill-posedness of the first-kind integral equation. To resolve this problem, a stabilization technique (known as a regularization method) is applied to the present problem of the identification of nonlinear damping. The identified results for nonlinear roll dampings are compared with those from a conventional roll identification method. The findings of the present study are validated by the direct comparison of experimental data on free-roll decay motion with the numerically simulated results.     

Studies on Stochastic Parametric Roll of Ship with Stochastic Averaging Method

The paper studies the parametric stochastic roll motion in the random waves. The differential equation of the ship parametric roll under random wave is established with considering the nonlinear damping and ship speed. Random sea surface is treated as a narrow-band stochastic process, and the stochastic parametric excitation is studied based on the effective wave theory. The nonlinear restored arm function obtained from the numerical simulation is expressed as the approximate analytic function. By using the stochastic averaging method, the differential equation of motion is transformed into Ito's stochastic differential equation. The steady-state probability density function of roll motion is obtained, and the results are validated with the numerical simulation and model test.     

Design of passive anti-roll tanks for roll stabilization in the nonlinear range

The best way of reducing roll motion is by increasing roll damping. Bilge keels are the most common devices for increasing roll damping. If more control is required, anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. Our objective is to develop design procedures for passive tanks for roll reduction in rough seas. This paper focuses on the design of passive U-tube tanks. The tank-liquid equation of motion is integrated simultaneously with the six-degree-of-freedom (6DOF) equations of the ship motion. The coupled set of equations is solved by using the Large Amplitude Motion Program ‘LAMP’, which is a three-dimensional time-domain simulation of the motion of ships in waves. The unstabilized and stabilized roll motions of a S60-70 ship with forward speed and beam waves have been analyzed. For high-amplitude waves, the unstabilized roll angle exhibits typical nonlinear phenomena: a shift in the resonance frequency, multi-valued responses, and jumps. The performance of a S60-70 ship with a passive tank is investigated in various sea states with different encounter wave directions. It is found that passive anti-roll tanks tuned in the linear or nonlinear ranges are very effective in reducing the roll motion in the nonlinear range. The effect of the tank damping, frequency, and mass on the tank performance is studied. Also, it is found that passive anti-roll tanks are very effective in reducing the roll motion for ships having a pitch frequency that is nearly twice the roll frequency in sea states 5 and 6.     

Application of advanced system identification technique to extract roll damping from model tests in order to accurately predict roll motions

In this paper our previously developed advanced system identification technique [1] has been applied to extract the frequency dependent roll damping from a series of model tests run in irregular (random) waves. It is shown that this methodology accurately models the roll damping which can then be used to produce accurate predictions of the ships roll motion. These roll motion predictions are not only more accurate than the potential flow predictions but more accurate than potential flow models corrected using either empirical prediction methods [2] and even those corrected using roll damping obtained from free decay sallying experiments. This methodology has the potential to significantly improve roll motion prediction during full scale at sea trails of vessels in order to dramatically improve safety of critical operations such as helicopter landing or ship to ship cargo transfer.     

Stochastic inverse modeling of nonlinear roll damping moment of a ship

This work presents an application of stochastic inverse method for the determination of nonlinear roll damping moment of a ship at zero forward speed. Nonlinear roll damping moment was estimated from the measured dynamic responses through stochastic inverse model. It is shown that this method enables nonlinear characteristic of the roll damping to be estimated without any assumption on its form of nonlinearity, including its confidence intervals given noisy data. The accuracy and practicability were assessed with laboratory tests related to both free-decay and forced rolling motions. The estimation results of the nonlinear damping moment show good agreement in all cases.     

Using wavelet transforms to analyze nonlinear ship rolling and heave-roll coupling

The use of wavelet transforms is explored to investigate the nonlinear dynamical characteristics of ship roll and coupled heave-roll motion. The harmonic character, double period character and chaotic character are observed via a time–frequency window of the wavelet transform. Typical wave parameters in different stability regions are considered. Features such as restoring rolling, divergence rolling, steady state and chaotic responses of ship roll are obtained as well. The investigation in this paper not only highlights the feasibility of using wavelet transforms in the analysis of nonlinear dynamic characteristics of ship rolling in waves, but also shows how it could enhance the analysis abilities.     

Unscented Kalman Filter trained neural networks based rudder roll stabilization system for ship in waves

The large roll motion of ships sailing in the seaway is undesirable because it may lead to the seasickness of crew and unsafety of vessels and cargoes, thus it needs to be reduced. The aim of this study is to design a rudder roll stabilization system based on Radial Basis Function Neural Network (RBFNN) control algorithm for ship advancing in the seaway only through rudder actions. In the proposed stabilization system, the course keeping controller and the roll damping controller were accomplished by utilizing modified Unscented Kalman Filter (UKF) training algorithm, and implemented in parallel to maintain the orientation and reduce roll motion simultaneously. The nonlinear mathematical model, which includes manoeuvring characteristics and wave disturbances, was adopted to analyse ship’s responses. Various sailing states and the external wave disturbances were considered to validate the performance and robustness of the proposed roll stabilizer. The results indicate that the designed control system performs better than the Back Propagation (BP) neural networks based control system and conventional Proportional-Derivative (PD) based control system in terms of reducing roll motion for ship in waves.     

规则波中船舶复原力和参数横摇研究

为研究规则波中船舶复原力变化规律及其对参数横摇的影响,首先,基于切片理论求解出船舶无横倾时在波浪中时间序列垂荡和纵摇运动,确定出波面与船体的相对位置;其次,利用三个坐标系之间的转换关系进而确定规则波中船体各横剖面左右舷与波面瞬时交点,求得各浸水剖面面积;然后对波浪压力沿船长湿表面积分,得出规则波中船舶复原力的Froude-Krylov部分。同时,利用作用在横倾船舶上的辐射力和绕射力,求出规则波中船舶复原力辐射力和绕射力部分。在复原力计算的基础上,确定一个参数横摇模型,实现波浪中参数横摇计算。以一艘集装箱船为例,研究了规则波中复原力变化以及参数横摇规律,复原力变化幅度是影响参数横摇的一个重要因素。     

An investigation into parametric roll resonance in regular waves using a partly non-linear numerical model

A partly non-linear time-domain numerical model is used for the prediction of parametric roll resonance in regular waves. The ship is assumed to be a system with four degrees of freedom, namely, sway, heave, roll and pitch. The non-linear incident wave and hydrostatic restoring forces/moments are evaluated considering the instantaneous wetted surface whereas the hydrodynamic forces and moments, including diffraction, are expressed in terms of convolution integrals based on the mean wetted surface. The model also accounts for non-potential roll damping expressed in an equivalent linearised form. Finally, the coupled equations of motion are solved in the time-domain referenced to a body fixed axis system.This method is applied to a range of hull forms, a post-Panamax C11 class containership, a transom stern Trawler and the ITTC-A1 containership, all travelling in regular waves. Obtained results are validated by comparison with numerical/experimental data available in the literature. A thorough investigation into the influence of the inclusion of sway motion is conducted. In addition, for the ITTC-A1 containership, an investigation is carried out into the influence of tuning the numerical model by modifying the numerical roll added inertia to match that obtained from roll decay curves.     

Experimental investigation of the lift component of roll damping

The lift force and turning moment acting on a model towed obliquely to the direction of motion have been measured. Two models were used; one of them was tested fitted with and without a rudder. These measurements were used to determine the magnitude of the lift coefficient and the point of application of the transverse force acting on the model. The data were then used to determine the lift component of the roll damping moment. It has been found that the equivalent linear damping coefficient due to lift is a nonlinear function of the forward speed of the ship.     

圆筒形FPSO尺度规划和运动性能研究

首先介绍全球海域圆筒形装置的工程应用案例,对比圆筒形FPSO相对常规船形的优势,然后以原油储量、工艺模块甲板面积、耐波性、稳性、系泊系统、排水量等控制参数为目标,研究圆筒形FPSO主尺度选取依据,分舱原则。重点研究圆筒形装置的阻尼板结构,此为抑制运动响应的关键结构,通过模型试验方法分析对比了水平阻尼板、不同角度锥形阻尼板的特性。最后研究圆筒形装置运动性能分析方法,介绍二阶响应数值预报方法,研究垂荡和横摇运动的耦合效应,分析波频和低频运动响应,通过模型试验进行了验证,从而指导圆筒形装置设计。     

Roll stabilization by anti-roll passive tanks

Since the most severe roll motion occurs at resonance (known as synchronous rolling), the best way of reducing it is to increase the damping. The most common means of doing so is by the installation of bilge keels. If more control is required, both anti-roll tanks and fins are used. Tanks have the advantage of being able to function when the ship is not underway. The use of tanks with liquid free surfaces for reducing roll motion of ships is an old idea. Many researchers have studied the design of anti-roll tanks. However, most of the past effort has concentrated on studying the performance of anti-roll tanks in damping the roll motion of the ship. Little attention has been paid to the fluid motion inside the tank itself. Another important issue is the tank tuning. Proper tuning of the anti-roll tank, to match the ship's natural frequency, is very important in reducing the roll motion. This paper concentrates on the most familiar type, which is the U-tube passive tank as a mechanical absorber of roll motion. A detailed study, covering tank damping, mass, location relative to the ship CG, and tuning, is presented. New suggestions and observations are stated concerning tank damping and tuning.     

On the parametric rolling of ships using a numerical simulation method

This paper has shown a numerical motion simulation method which can be employed to study on parametric rolling of ships in a seaway. The method takes account of the main nonlinear terms in the rolling equation which stabilize parametric rolling, including the nonlinear shape of the righting arm curve, nonlinear damping and cross coupling among all 6 degrees of freedom. For the heave, pitch, sway and yaw motions, the method uses response amplitude operators determined by means of the strip method, whereas the roll and surge motions of the ship are simulated, using nonlinear motion equations coupled with the other 4 degrees of freedom. For computing righting arms in seaways, Grim's effective wave concept is used. Using these transfer functions of effective wave together with the heave and pitch transfer functions, the mean ship immersion, its trim and the effective regular wave height are computed for every time step during the simulation. The righting arm is interpolated from tables, computed before starting the simulation, depending on these three quantities and the heel angle. The nonlinear damping moment and the effect of bilge keels are also taken into account. The numerical simulation tool has shown to be able to model the basic mechanism of parametric rolling motions. Some main characteristics of parametric rolling of ships in a seaway can be good reproduced by means of the method. Comprehensive parametric analyses on parametric rolling amplitude in regular waves have been carried out, with that the complicated parametric rolling phenomena can be understood better.     

Calculation of a capsizing rate of a ship in stochastic beam seas

This study introduces a method of calculating a capsizing rate of a ship. The phenomenon ‘capsizing’ is described as a jump of local equilibrium point from that near the upright position of a ship to what describes the upside-down attitude of the capsized ship; the rate of occurrence of such jumps was calculated. The potential function corresponding to the roll restoring moment have two potential wells located at the roll displacement angle 0 and 180°, respectively. A nonlinear Fokker–Planck equation for the joint probability density function of roll angle and velocity was solved. The excitation to the ship was assumed to be a combination of a regular harmonic wave and a white noise process.