GIS-based microzonation of the Niksar settlement area for the purpose of urban planning (Tokat, Turkey)

Niksar (Tokat) is an urban area located in a seismically active zone of Turkey. The aim of this study is to prepare a GIS-based microzonation map of the Niksar settlement area for the purpose of urban planning. Liquefaction, activity, slope, aspect, fault proximity, ground amplification, and lithology are considered during the overlay analysis, using a multicriteria decision-making analysis of the analytical hierarchy process (AHP) and simple additive weighing (SAW) methods. Based on the resulting evaluations, the study area is divided into four different zones, namely (1) areas suitable for settlement, (2) provisional settlement areas, (3) areas requiring detailed geotechnical investigation, and (4) unsuitable areas. Maps prepared by the SAW and AHP methods are found to be consistent with each other. However, the microzonation map prepared by the AHP method is recommended for the purpose of urban planning because it is able to check its own consistency.     

A newly developed seismic microzonation model of Erbaa (Tokat, Turkey) located on seismically active eastern segment of the North Anatolian Fault Zone (NAFZ)

A methodology to model seismic microzonation maps is required in the hazard mitigation decision plans of the earthquake prone areas. The stage of disaster preparedness for new residential places is of great importance for detailed seismic microzonation models. The effects of local geological and geotechnical site conditions were considered in order to establish site characterization as the initial stage of the models in this study. Dynamic soil properties based on the empirical correlations between shear wave velocity (V _s) and standard penetration test blow counts were taken into account in order to define representative soil profiles extending down to the engineering bedrock. One-dimensional site response analyses were performed to analyze earthquake characteristics on the ground surface. The layers for soil classification, geology, depth to groundwater level, amplification, distance to fault, slope and aspect, and liquefaction-induced ground deformation potential of the study area were prepared in seismic microzonation models. The study area, Erbaa, is placed along the seismically active North Anatolian Fault Zone. Final seismic microzonation map of the study area was evaluated applying different GIS-based Multi-Criteria Decision Analysis (MCDA) techniques. Two of the MCDA techniques, simple additive weighting and analytical hierarchical process (AHP), are considered during the evaluation step of the final seismic microzonation map. The comparison is made in order to distinguish two different maps based on these MCDA techniques. Eventually, AHP-based seismic microzonation map is more preferable for the seismic design purposes in this study.     

Microzonation of Zeytinburnu region with respect to soil amplification: A case study

A microzonation study is performed as a part of the Zeytinburnu Pilot Project within the framework of the Earthquake Master Plan for Istanbul to determine the effects of local soil conditions on the earthquake forces that will act on structures. For this purpose, detailed geological and geotechnical studies are conducted at the site, a geological map which demonstrates the local geological features of the site is prepared, and the site is classified with respect to the dynamic behaviour based on the data gathered from the soil borings. In order to investigate the effects of local soil conditions on the dynamic behaviour, site response analyses are performed with the computer code EERA by utilizing the findings of field and laboratory investigations. The behaviour of the region during a probable earthquake is investigated through one dimensional response analyses and microzonation maps are prepared with respect to ground shaking intensity in accordance with the new microzonation manual [Ansal, A., Laue, J., Buchheister, J., Erdik, M., Springman, S., Studer, J., and Koksal, D., 2004. “Site characterization and site amplification for a seismic microzonation study in Turkey” 11th Int. Conference on Soil Dynamics and Earthquake Engineering and 3rd Earthquake Geotechnical Engineering, San Francisco; Studer, J. and Ansal, A., 2004. Belediyeler için Sismik Mikrobölgeleme El Kitabı, Araştırma Raporu, Afet İşleri Genel Müdürlüğü, Bayındırlık ve İskan Bakanlığı, Afet Risk Yönetimi Dünya Enstitüsü].     

First Order Seismic Microzonation of Delhi,India Using Geographic Information System (GIS)

A first order seismic microzonation map of Delhi is prepared using five thematic layers viz., Peak Ground Acceleration (PGA) contour, different soil types at 6 m depth, geology, groundwater fluctuation and bedrock depth, integrated on GIS platform. The integration is performed following a pair-wise comparison of Analytical Hierarchy Process (AHP), wherein each thematic map is assigned weight in the 5-1 scale: depending on its contribution towards the seismic hazard. Following the AHP, the weightage assigned to each theme are: PGA (0.333), soil (0.266), geology (0.20), groundwater (0.133) and bedrock depth (0.066). The thematic vector layers are overlaid and integrated using GIS. On the microzonation theme, the Delhi region has been classified into four broad zones of vulnerability to the seismic hazard. They are very high (> 52%), high (38–52%), moderate (23–38%) and less ( < 23%) zones of seismic hazard. The “very high” seismic hazard zone is observed where the maximum PGA varies from 140 to 210 gal for a finite source model of M_w 8.5 in the central seismic gap. A site amplification study from local and regional earthquakes for Delhi region using Delhi Telemetry Network data shows a steeper site response gradient in the eastern side of the Yamuna fluvial deposits at 1.5 Hz. The ‘high’ seismic hazard zone occupies most of the study area where the PGA value ranges from 90 to 140 gal. The ‘moderate’ seismic hazard zone occurs on either side of the Delhi ridge with PGA value varying from 60 to 90 gal. The ‘less’ seismic hazard zone occurs in small patches distributed along the study area with the PGA value less than 60 gal. Site response studies, PGA distribution and destruction pattern of the Chamoli earthquake greatly corroborate the seismic hazard zones estimated through microzonation on GIS platform and also establishes the methodology incorporated in this study.     

Ground motion studies for microzonation in Iran

An important step in effectively reducing seismic risk and the vulnerability of a city located in an earthquake prone area is to conduct a ground motion microzonation study for the desired return period. The International Institute of Earthquake Engineering and Seismology (IIEES) initiated a number of seismic microzonation projects for Iran. This paper presents the steps followed by IIEES in ground motion microzonation. IIEES performs both probabilistic and deterministic seismic hazard analysis. IIEES uses his own fault map for seismotectonic studies and develops modulus and damping curves for the soils in the study area. The experience of ground motion microzonation shows that in almost all cases, the estimated 475-year peak ground acceleration (PGA) values are higher than the PGA proposed by the Iranian seismic code. Although ground motion microzonation in Iran has some shortcomings, IIEES is making new improvement. This includes development in deterministic seismic hazard analysis, two-dimensional and three-dimensional modelling of basin and topographical effects, using microtremor measurements to find shear-wave velocity profiles in high-density urban areas and providing maps for spectral acceleration in the study area.     

Spectral discrimination of Recent sediments around Bhuj, India, using Landsat-TM data and assessment of their vulnerability to seismicity-related failures

Kachchh region of India is a rift basin filled with sediments from Jurassic to Quaternary ages. This area is tectonically active and witnessed several major earthquakes since the recent historical past. During an earthquake event, the water-laden foundation soil liquefies and causes damage to buildings and other civil engineering structures. The January 26, 2001, Bhuj earthquake demonstrated extensive liquefaction-related damages in entire Kachchh Peninsula. Therefore, evaluation of liquefaction susceptibility of unconsolidated sediments is a vital requirement for developing seismic microzonation maps. In this paper, a new approach involving remote sensing techniques and geotechnical procedures is demonstrated for effective mapping of liquefaction-susceptible areas. The present and paleo-alluvial areas representing unconsolidated sediments were mapped using Landsat-TM data and field reflectance spectra. Spectral discrimination of alluvial area was made using the feature-oriented principal component selection and spectral angle mapping techniques. Subsequently, field geotechnical investigations were carried out in these areas. It is evident from the results that the alluvial soils are predominantly sandy loam with very low (7–28) standard penetration test values. The evaluated factor of safety for these soils varies from 0.43 to 1.7 for a peak ground acceleration of 0.38. Finally, a liquefaction susceptibility map is prepared by integrating results on alluvium distribution, factor of safety, and depth to water table.     

An overview on the seismic zonation and microzonation studies in India

The present study presents a review on the progressive development of the seismic zonation map of India both from official agencies and also from independent individual studies. The zonation map have been modified and updated regularly with the occurrence of major destructive earthquakes over the years in the Indian subcontinent with the addition of new data. This study discusses the criteria chosen for the progressive zonation and the major earthquakes that were responsible for retrospection of the earlier published maps. The seismic zonation maps of India have also been prepared by various independent workers by adopting different approaches to achieve the purpose of the zonation. Despite the endeavors from various sources to provide a solution for the problem of earthquake hazards in India, there were many limitations on the zonation map as it gives the picture at a regional scale mostly on the bedrock level without addressing the local site conditions. But nevertheless, the seismic zonation map gives basic guidelines for any region to know the hazard scenario and if any city or urban population is under threat from seismic point of view, further site specific seismic microzonation may be carried out. In the International scenario, the Global Seismic Hazard Assessment Program (GSHAP) in 1999 prepared a hazard map for world in terms of peak ground acceleration (PGA) with a 10% probability of exceedance in 50 years, but it turned out to be an underestimation of the hazard parameter when compared with the observed PGA. To tackle the problem of seismic hazards, there was a need to have a detail study on the local site conditions in terms of its geological, geophysical and geotechnical properties. With the advent of better instrumentation and knowledge on the mechanics of earthquakes, it was possible to identify zones of hazards at a local level and this gives rise to the study of seismic microzonation. Seismic microzonation work has been carried out in India in some of the strategic important mega cities and industrial build up that has the potential of being damaged from future earthquakes, as has been shown in the past. Though the microzonation map is not the final output map, as it can still be updated at later stage with more input data, it does provide a more realistic picture on the site specific seismic hazard.     

Determining the hard rock groundwater pathway in Golgohar complex formation using hydrochemical data in AHP

Thirty percent of present industrial water consumption of the Golgohar Iron Ore Mine (GIOM) is supplied from a hard rock well (PW-A15) and the rest from 25 wells located in 4 disconnected alluvial aquifers. This well is drilled in the metamorphic complex of Golgohar formation. Attempts have been made to develop extraction of water from other hard rocks existing in the area with no success. Therefore, extensive researches have been carried out to find the pathway, or a provision pathway of water discharged from this well. To study the hydrochemical similarity of this water with other water resources, 122 water samples from an area of 7132 km² were collected from the existing pumping wells, piezometers, mine exploration bore holes, and three salt pans in the vicinity of the area for hydrochemical analysis. The analyses were performed for concentration of major ions and some minor elements. Furthermore, the spatial distribution of ion concentration was plotted in the GIS to delineate the similarity of the PW-A15 water with other water sources and their hydrochemical neighborhood by analytical hierarchy process (AHP). The AHP was performed in two steps: first, iso-concentration maps of seven major ions, eight minor elements, and TDS were used to produce an AHP map (Map1) using weights for different hydrochemical parameters; and second, a similarity index (SI) map was prepared by performing a suggested clustering approach in SPSS using K-means clustering, which was overlaid on Map1 producing Map2. The result of AHP Map2 was then overlaid on the iso-potential map of the sampled locations in GIS software using a mask operator. Therefore, the zones having the most similarity and higher hydraulic potential than PW-A15 were nominated as the zones which possibly could recharge this well, and the groundwater (GW) pathway was proposed. The result of the study method showed to be successful and will be used as a guide for future exploration drillings.     

Seismic microzonation of Bangalore,India

In the present study, an attempt has been made to evaluate the seismic hazard considering local site effects by carrying out detailed geotechnical and geophysical site characterization in Bangalore, India to develop microzonation maps. An area of 220 km², encompassing Bangalore Mahanagara Palike (BMP) has been chosen as the study area. Seismic hazard analysis and microzonation of Bangalore are addressed in three parts: in the first part, estimation of seismic hazard is done using seismotectonic and geological information. Second part deals with site characterization using geotechnical and shallow geophysical techniques. In the last part, local site effects are assessed by carrying out one-dimensional (1-D) ground response analysis (using the program SHAKE2000) using both standard penetration test (SPT) data and shear wave velocity data from multichannel analysis of surface wave (MASW) survey. Further, field experiments using microtremor studies have also been carried out for evaluation of predominant frequency of the soil columns. The same has been assessed using 1-D ground response analysis and compared with microtremor results. Further, the Seed and Idriss simplified approach has been adopted to evaluate the soil liquefaction susceptibility and liquefaction resistance assessment. Microzonation maps have been prepared with a scale of 1:20,000. The detailed methodology, along with experimental details, collated data, results and maps are presented in this paper.     

Groundwater potential mapping by combining fuzzy-analytic hierarchy process and GIS in Beyşehir Lake Basin,Turkey

Delineation of the groundwater potential zones is one of the most essential process for the sustainable management of the groundwater sources. However, groundwater studies are quite hard and complex for many regions besides consuming time and cost. This study focused on the groundwater potential mapping in Bey?ehir Lake Basin. Mainly, fuzzy-analytic hierarchy process (fuzzy-AHP) integrated with GIS was used to determine potential zones for groundwater. Seven parameters, namely lithology, lineament, drainage density, land use, slope, soil type, and rainfall were evaluated and Groundwater Potential Index (GWPI) was calculated using weight and rating coefficients of each parameter. According to obtained results, GWPI varies from 0.07665 to 0.28243 in the basin. The low, moderate, and high groundwater potential classes were determined with quantile classification method. The groundwater potential map demonstrates that the high groundwater potential area is located around the lake shore, in the alluvium and limestone fields because high permeability rates depend on soil type, low slope, karstic structure, and agricultural activities in these regions. In addition, the distribution of the springs confirms with groundwater potential area determined with this study.     

GIS-based multi-criteria earthquake hazards evaluation using analytic hierarchy process for a nuclear power plant site,west Alexandria,Egypt

Nuclear power plants are designed to prevent the hazardous effects of the earthquakes and any external events to keep the safety of the plant. Ninety-one shallow seismic refraction profiles were performed to determine shear wave velocity of the engineering layers at the site of El Dabaa area that is situated to the northern coastline of Egypt for seismic hazard microzonation evaluation according to hazard index values. A microzonation is a procedure of delineating an area into individual zones having different ranks of numerous seismic hazards. This will aid in classifying areas of high seismic risk which is vigorous for industrial design of nuclear structures. The site response analysis requires the characterization of subsurface materials considering local subsurface profiles of the site. Site classification of the area under investigation was undertaken using P- and S-waves and available borehole data. The studied nuclear power plant site has been characterized as per NEHRP site classification using an average velocity of transverse wave (V _s ³⁰ ) of depth 30 m which acquired from seismic survey. This site was categorized into two site classes: the major one is “site class B,” and the minor one is “site class A.” The attenuation coefficient, the damping ratio and the liquefaction potential are geotechnical parameters which were derived from P- and S-waves, and have their major effects on the seismic hazard contribution. 1D ground response analysis was carried out in the places of seismic profiles inside the site for estimating the amount of ground quaking using peak ground acceleration (PGA), site amplification, predominant frequency and spectral accelerations on the surface of ground by the DEEPSOIL software package. Seven factors (criteria) deliberated to assess the earthquake hazard index map are: (1) the peak ground acceleration at the bedrock, (2) the amplification of the site, (3) the liquefaction potential, (4) the main frequency of the earthquake signal, (5) the average V _s of the first 30 m from the ground surface, (6) the depth to the groundwater and (7) the depth to the bedrock. These features were exemplified in normalized maps after uniting them to 0–1 scores according to some criteria by the minimum and maximum values as linear scaling points. Multi-criteria evaluation is an application of multi-criteria decision analysis theory that used for developing a seismic hazard index map for a nuclear power plant site at El Dabaa area in ArcGIS 10.1 software. Two models of decision making were used in this work for seismic hazard microzonation. The analytic hierarchy process model was applied to conduct the relative weights of the criteria by pairwise comparison using Expert Choice Software. An earthquake hazard index map was combined using Weighted Linear Combination model of the raster weighted overlay tool of ArcGIS 10.1. The results indicated that most of the study site of the nuclear power plant is a region of low to moderate hazard; its values are ranging between 0.2 and 0.4.     

Multilinear Regression Analysis for Seismic Response and Engineering Properties of Liquefiable Coromandel Coastal Soil Deposits

This paper investigates the seismic characteristics and geotechnical properties with respect to the liquefaction potential of the deposits in the Coromandel coastal line of Nagapattinam town, Tamilnadu, India. A series of field tests were conducted using standard penetration test, cone penetration test and plate load test. Laboratory tests were conducted on the collected samples. From the results, a microzonation map was developed for the liquefaction potential and settlements. Some multilinear regression models between permeability, fines content, relative density, coefficient of curvature, coefficient of uniformity, mean particle size, factor of safety, settlement, standard penetration test values and cone penetration test values were developed. The shear wave velocity and shear modulus were calculated from the field penetration tests and correlations between the normalized values of peak ground accelerations, velocities and displacements, which were obtained from the equivalent linear ground motion analysis using SHAKE software, with other parameters of soil. From the results, it was found that at some of the areas are vulnerable to high amplification of waves even for small earthquake.     

内蒙古奈曼旗水环境承载力评价

水环境评价模型指标体系的选取和权重的确定是研究水环境承载力模型的关键.选取地下水脆弱性能,水环境质量,水体污染,开采程度,污染河水对地下水的影响等5个评价指标进行综合评价,利用层次分析法作为一种定量研究方法,运用专家评分法确定了评价指标体系中的各指标权重,并进行指标体系的可靠性和有效性判断,对区内地下水环境进行综合评价及可开采潜力分析.根据取得分值分区,确定承载力评价分区图,为地下水资源的合理利用提供了依据.     

Landslide susceptibility mapping using analytic hierarchy process and information value methods along a highway road section in Constantine,Algeria

This research work deals with the landslide susceptibility assessment using Analytic hierarchy process (AHP) and information value (IV) methods along a highway road section in Constantine region, NE Algeria. The landslide inventory map which has a total of 29 single landslide locations was created based on historical information, aerial photo interpretation, remote sensing images, and extensive field surveys. The different landslide influencing geoenvironmental factors considered for this study are lithology, slope gradient, slope aspect, distance from faults, land use, distance from streams, and geotechnical parameters. A thematic layer map is generated for every geoenvironmental factor using Geographic Information System (GIS); the lithological units and the distance from faults maps were extracted from the geological database of the region. The slope gradient, slope aspect, and distance from streams were calculated from the Digital Elevation Model (DEM). Contemporary land use map was derived from satellite images and field study. Concerning the geotechnical parameters maps, they were determined making use of the geotechnical data from laboratory tests. The analysis of the relationships between the landslide-related factors and the landslide events was then carried out in GIS environment. The AUC plot showed that the susceptibility maps had a success rate of 77 and 66% for IV and AHP models, respectively. For that purpose, the IV model is better in predicting the occurrence of landslides than AHP one. Therefore, the information value method could be used as a landslide susceptibility mapping zonation method along other sections of the A1 highway.     

Delineation of potential groundwater zones based on multicriteria decision making technique

Groundwater is the most prioritized water source in India and plays an indispensable role in India's economy. The groundwater potential mapping is key to the sustainable groundwater development and management. A hybrid methodology is applied to delineate potential groundwater zones based on remote sensing, geographical information systems(GIS) and analytic hierarchy process(AHP) as on multicriteria decision making. For the purpose of demonstrating field application, Chittar watershed, Tamilnadu, India is studied as an example. The important morphological characteristics considered in the study are lithology, geomorphology, lineament density, drainage density, slope, and Soil Conservation Service–Curve Number(SCS-CN). These six thematic layers are generated in a GIS platform. Based on intersecting the layers, AHP method, the values for adopting the pairwise comparison normalized weight and normalized subclasses weightage were given. The normalized subclass weightage is input into each layer subclass. Then, weighted linear combination method is used to add the data layers in GIS platform to generate groundwater potential Index(GWPI) map. The GWPI map is validated based on the net recharge computed from the differences of measured groundwater levels between the pre-monsoon and post-monsoon in the year 2018. The kappa statistics are used to measure level spatial consistency between the GWPI and net recharge map. The overall average spatial matching accuracy between the two data sets is 0.86, while the kappa coefficient for GWPI with net recharge, 0.78. The results show that in Chittar watershed about 870 km~2 area is divided into high potential zone(i.e. sum of very high and high potential zone), 667 km~2 area, as the moderate one and the rest 105 km~2 area, as the poor zone(i.e. sum of very poor and poor potential zone).     

层次分析法在致密油有利区优选中的应用——以川中侏罗系大安寨段为例

层次分析法常用于解决复杂系统分析与决策中目标优选、排序等问题,也适用于油气勘探领域。在前人致密油地质特征研究的基础上,总结了致密油有利区优选指标。使用层次分析法优选有利区的核心内容是建立层次结构模型和构建2类矩阵。以四川盆地中部侏罗系大安寨段为例,介绍了使用层次分析法优选有利区5个主要步骤:1根据研究区地质特征,确定目标及方案,构建目标层和方案层;2根据影响致密油富集的要素,确定准则层;3构建准则层中各要素的成对比较矩阵,确定各准则要素的相对权重;4构建各准则要素对不同方案的判断矩阵,确定不同方案中各准则要素的权重;5将不同方案各准则要素的权重矩阵与准则要素的相对权重矩阵相乘,得到各方案的层次排序,进而选出最佳方案。优选的川中侏罗系大安寨段致密油最有利勘探区为金华—莲池区。操作简单、不需考虑下限值、适用范围广是层次分析法优选有利区的优点,但由于层次分析中的标度根据人为经验赋值,不同评价人员给出的评价结果有所不同。将层次分析法与GIS、特尔菲法、模糊数学法相结合,可以提高准则要素的优选合理性及赋值准确性。     

Engineering-geological and geotechnical investigation for risk assessment

Before construction activities could begin, engineering geological and geotechnical investigations had to be approved in order to establish a map with suitable areas for safe construction. The example used in this study is Tunis City which has complex geology and geomorphology. The risk analysis was based on a large-scale land-suitability map that was prepared using Geographic Information Systems (GIS). The approach used in this study combined physical data with the geotechnical properties of Tunis City. The adopted methodology and analyses were performed to assess the risk of urban expansion and landscape management. Results are presented as a zoning map that shows the suitable area for safe extension of the urban area. The data used and multi-criterion analysis of geotechnical and geological data seems to be useful for similar case studies and the adopted methodology can be used successfully for identifying similar cities for risk assessment.     

Seismic hazard assessment for Mymensingh,Bangladesh

Mymensingh municipality lies in one of the most earthquake-prone areas of Bangladesh. The town was completely destroyed during the Great Indian Earthquake of 12 June 1897, for which the surface-wave magnitude was 8.1. In this study the 1897 Great Indian Earthquake was used as a scenario event for developing seismic microzonation maps for Mymensingh. For microzonation purposes SPT data from 87 boreholes were collected from different relevant organizations. To verify those data ten boreholes of depth up to 30 m were drilled. Intensity values obtained for different events were calibrated against attenuation laws to check applicability to the study area. Vibration characteristics at diverse points of the study area were estimated by employing the one-dimensional wave-propagation software SHAKE. SHAKE discretizes the soil profile into several layers and uses an iterative technique to represent the non-linear behavior of the soil by adjusting the material properties at each iteration step. The required input information includes depth, shear wave velocity, damping factor, and unit weight of each soil layer. The liquefaction resistance factor and the resulting liquefaction potential were estimated to quantify the severity of liquefaction. Quantification of secondary site effects and the weighting scheme for combining the various seismic hazards were heuristic, based on judgment and expert opinion.     

Seismic microzonation of a nuclear power plant site with detailed geotechnical,geophysical and site effect studies

This paper highlights the seismic microzonation carried out for a nuclear power plant site. Nuclear power plants are considered to be one of the most important and critical structures designed to withstand all natural disasters. Seismic microzonation is a process of demarcating a region into individual areas having different levels of various seismic hazards. This will help in identifying regions having high seismic hazard which is vital for engineering design and land-use planning. The main objective of this paper is to carry out the seismic microzonation of a nuclear power plant site situated in the east coast of South India, based on the spatial distribution of the hazard index value. The hazard index represents the consolidated effect of all major earthquake hazards and hazard influencing parameters. The present work will provide new directions for assessing the seismic hazards of new power plant sites in the country. Major seismic hazards considered for the evaluation of the hazard index are (1) intensity of ground shaking at bedrock, (2) site amplification, (3) liquefaction potential and (4) the predominant frequency of the earthquake motion at the surface. The intensity of ground shaking in terms of peak horizontal acceleration (PHA) was estimated for the study area using both deterministic and probabilistic approaches with logic tree methodology. The site characterization of the study area has been carried out using the multichannel analysis of surface waves test and available borehole data. One-dimensional ground response analysis was carried out at major locations within the study area for evaluating PHA and spectral accelerations at the ground surface. Based on the standard penetration test data, deterministic as well as probabilistic liquefaction hazard analysis has been carried out for the entire study area. Finally, all the major earthquake hazards estimated above, and other significant parameters representing local geology were integrated using the analytic hierarchy process and hazard index map for the study area was prepared. Maps showing the spatial variation of seismic hazards (intensity of ground shaking, liquefaction potential and predominant frequency) and hazard index are presented in this work.     

Vulnerability assessment for the Gaza Strip, Palestine using DRASTIC

The main usefulness of groundwater vulnerability assessment maps is their ability to be an effective preliminary tool for planning, policy, and operational levels of decision-making. DRASTIC is one such assessment method. The DRASTIC index is made up of a calculated sum of products rating and weights for seven hydrogeological parameters that contribute to aquifer vulnerability. With the help of GIS, and based on the available data, maps of DRASTIC parameters were prepared for the Gaza Strip area in a case study. Each map was given a proper rate and a special weight factor developed. The final vulnerability map was obtained as a summation of the seven maps after multiplying each one with the appropriate weight. The vulnerability map was checked against the actual pollution potential in the area and nitrate concentration. The obtained vulnerability map is strongly correlated to known pollution values in the area.