我国西部高原大气边界层中的对流活动

利用 1 998年第 2次青藏高原野外试验中的多普勒声雷达探测、低空探测观测以及卫星观测资料对高原大气边界层内的对流现象进行分析研究。声雷达探测到了高原边界层内有强烈的对流活动。这种对流泡中心的垂直速度可超过 1m/s,并存在尺度为 1个多小时的周期性 ,表现为中小尺度的有组织的湍流活动。高原边界层强对流得以发展和维持的物理机制是 :强辐射加热、复杂的地形地貌形成的下垫面不均一性造成边界层斜压性、边界层内的平流活动等 ,这些现象都有利于对流的发展。在这些条件的作用下 ,边界层内可以产生一系列有组织的强湍流大涡旋活动 ,这些大涡旋形成的热泡在向上发展的过程中有的能够发生合并 ,变得更大也更为猛烈 ,达到凝结高度以上可形成对流云 ,并发生充分的对流混合。成云过程凝结潜热释放更有利于对流运动进一步发展 ,使对流云逐步发展成更大的对流云团 ,从而产生卫星云图中显示的云团发展过程。     

Vertical velocity field in the convective boundary layer as observed with an acoustic Doppler sodar

The morning development of the daytime convective boundary layer (CBL) during fine weather has been observed with an acoustic Doppler sodar of the C.R.P.E. In particular, the vertical profile of the vertical velocity third-order statistic W* ³ has been obtained. This quantity is a maximum near 0.3z _I where z _I, is the height of the CBL. The histogram of vertical velocity in the CBL shows a relationship between W ³ and the convective velocity W _* and is useful for convective plume determination.     

A one-dimensional model for the parameterization of deep convection in the ocean

A one-dimensional penetrative plume model has been constructed to parameterize the process of deep convection in ocean general circulation models (OGCMs). This research is motivated by the need for OGCMs to better model the production of deep and intermediate water masses. The parameterization scheme takes the temperature and salinity profiles of OGCM grid boxes and simulates the subgrid-scale effects of convection using a one-dimensional parcel model. The model moves water parcels from the surface layer down to their level of neutral buoyancy, simulating the effect of convective plumes. While in transit, the plumes exchange water with the surrounding environment; however, the bulk of the plume water mass is deposited at e level of neutral buoyancy. Weak upwelling around the plumes is included to maintain an overall mass balance. The process continues until the negative buoyant energy of the one-dimensional vertical column is minimized. The parameterized plume entrainment rate, which plays a central role in the parameterization, is calculated using modified equations based on the physics of entraining buoyant plumes. This scheme differs from the convective adjustment techniques currently used in OGCMs, because the parcels penetrate downward with the appropriate degree of mixing until they reach their level of neutral stability.     

Seasonal trends in the frequencies of strong winds over Lake Superior and the gulf of St. Laurence

An acoustic echo sounder situated in downtown Toronto has been used to detect convective plumes in the planetary boundary layer and to measure, by means of the Doppler effect, the vertical air motions associated with them. The plumes observed were the order of 390 m in horizontal extent, were detectable to a height of about 400 m, and were characterized by peak upward velocities in excess of 1 m s^?1. The sounder measurements are shown to be consistent with surface meteorological parameters, and suggest that free convection over an urban area of considerable surface roughness and non‐uniformity is not greatly different from that over uniform land surfaces or water.     

Convective characteristics of the nocturnal urban boundary layer as observed with Doppler sodar and Raman lidar

Convective plume patterns, characteristic of clear sky and light wind daytime boundary layers over land, were observed for two nights with a tri-axial Doppler sodar operated in the central area of Rome during the summer of 1994. An urban heat island effect, combined with a continuation of a breeze from the sea late into night during both days, is believed to be responsible for the observed nocturnal convection. Estimates of the surface heat flux and the vertical velocity scaling parameter are obtained from profiles of vertical velocity variance, and the Raman lidar water vapor measurements are used to obtain the humidity scaling parameter. Convective scaling results for vertical wind and humidity fairly agree with the results of other experiments and models. On the basis of available measurements, it appears that mixed-layer similarity formulations used to characterize the daytime convective boundary layer over horizontally homogeneous surfaces can also be applied to the nocturnal urban boundary layer during periods of reasonable convective activity.     

Simulating Dispersion in the Evening-Transition Boundary Layer

We investigate dispersion in the evening-transition boundary layer using large-eddy simulation (LES). In the LES, a particle model traces pollutant paths using a combination of the resolved flow velocities and a random displacement model to represent subgrid-scale motions. The LES is forced with both a sudden switch-off of the surface heat flux and also a more gradual observed evolution. The LES shows ‘lofting’ of plumes from near-surface releases in the pre-transition convective boundary layer; it also shows the subsequent ‘trapping’ of releases in the post-transition near-surface stable boundary layer and residual layer above. Given the paucity of observations for pollution dispersion in evening transitions, the LES proves a useful reference. We then use the LES to test and improve a one-dimensional Lagrangian Stochastic Model (LSM) such as is often used in practical dispersion studies. The LSM used here includes both time-varying and skewed turbulence statistics. It is forced with the vertical velocity variance, skewness and dissipation from the LES for particle releases at various heights and times in the evening transition. The LSM plume spreads are significantly larger than those from the LES in the post-transition stable boundary-layer trapping regime. The forcing from the LES was thus insufficient to constrain the plume evolution, and inclusion of the significant stratification effects was required. In the so-called modified LSM, a correction to the vertical velocity variance was included to represent the effect of stable stratification and the consequent presence of wave-like motions. The modified LSM shows improved trapping of particles in the post-transition stable boundary layer.     

A similarity model for maximum ground-level concentration in a freely convective atmospheric boundary layer

A model of buoyancy- and momentum-driven industrial plumes in a freely convective boundary layer is proposed. The development combines the Lagrangian similarity models of Yaglom for non-buoyant releases in the convective surface layer with the Scorer similarity model for industrial plumes. Constraints on the validity of the extension of Yaglom’s model to the entire convective planetary boundary layer, arrived at by consideration of Batchelor’s formulation for diffusion in an inertial subrange, are often met in practice. The resulting formulation applies to an interval of time in which the entrainment of the atmosphere by the plume is balanced by the entrainment of the plume by the atmosphere. It is argued that during this interval, both maximum plume rise and ground contact are achieved. Further examination of the physical interrelationship with the Csanady-Briggs formulation serves to consolidate the model hypotheses, as well as to simplify the derivation of maximum ground-level concentrations. Experimental evidence is presented for the validity of the model, based on Moore’s published data.     

A Similarity Model for Maximum Ground-Level Concentration in a Freely Convective Atmospheric Boundary Layer

A model of buoyancy- and momentum-driven industrial plumes in a freely convective boundary layer is proposed. The development combines the Lagrangian similarity models of Yaglom for non-buoyant releases in the convective surface layer with the Scorer similarity model for industrial plumes. Constraints on the validity of the extension of Yaglom’s model to the entire convective planetary boundary layer, arrived at by consideration of Batchelor’s formulation for diffusion in an inertial subrange, are often met in practice. The resulting formulation applies to an interval of time in which the entrainment of the atmosphere by the plume is balanced by the entrainment of the plume by the atmosphere. It is argued that during this interval, both maximum plume rise and ground contact are achieved. Further examination of the physical interrelationship with the Csanady-Briggs formulation serves to consolidate the model hypotheses, as well as to simplify the derivation of maximum ground-level concentrations. Experimental evidence is presented for the validity of the model, based on Moore’s published data.     

Vertical profiling of convective dust plumes in southern Morocco during SAMUM

Lifting of dust particles by dust devils and convective plumes may significantly contribute to the global mineral dust budget. During the Saharan Mineral Dust Experiment (SAMUM) in May–June 2006 vertical profiling of dusty plumes was performed for the first time. Polarization lidar observations taken at Ouarzazate (30.9°N, 6.9°W, 1133 m height above sea level) are analyzed. Two cases with typical and vigorous formation of convective plumes and statistical results of 5 d are discussed. The majority of observed convective plumes have diameters on order of 100–400 m. Most of the plumes (typically 50–95%) show top heights <1 km or 0.3DLH with the Saharan dust layer height DLH of typically 3–4 km. Height-to-diameter ratio is mostly 2–10. Maximum plume top height ranges from 1.1 to 2.9 km on the 5 d. 5–26 isolated plumes and clusters of plumes per hour were detected. A low dust optical depth (<0.3) favours plume evolution. Observed surface, 1 and 2–m air temperatures indicate that a difference of 17–20 K between surface and 2-m air temperature and of 0.9–1 K between the 1 and 2-m temperatures are required before convective plumes develop. Favourable horizontal wind speeds are 2–7 m s⁻¹.     

On the analytical solution for two-dimensional convective plume and analytical modeling of the entrainment zone thickness

Analytical solution for two-dimensional thermal plume updraft velocity is obtained under the assumption of a uniform temperature excess inside the plume. In this way, the thermal plume motion is modeled in both mixed layer and entrainment zone. Also, a semi-analytical solution is obtained using an empirical model for the plume temperature excess in the mixed layer. In addition, an analytical model for entrainment zone thickness is obtained by computing the overshoot distance of the modeled plumes, and a semi-analytical model by using the empirical model for plume temperature. By using a nonlinear profile for the lapse rate in the surface layer based on the Monin–Obukhov similarity theory, our model predicts that the characteristics of the surface layer plays an important role in the structure of the entrainment zone. Finally, our solutions for plume velocity allow us to consider the effect of the lateral entrainment on the plume excess temperature and velocity in the convective boundary layer. It is shown that the lateral entrainment has an important role on the plume dynamics and the solutions in the zero entrainment limit offer large overestimated values for the plume velocity, which also result in overestimated values of the entrainment zone thickness.     

Effect of Vertical Wind Shear on Concentration Fluctuation Statistics in a Point Source Plume

Measurements of concentration fluctuation intensity, intermittency factor, and integral time scale were made in a water channel for a plume dispersing in a well-developed, rough surface, neutrally stable, boundary layer, and in grid-generated turbulence with no mean velocity shear. The water-channel simulations apply to full-scale atmospheric plumes with very short averaging times, on the order of 1–4 min, because plume meandering was suppressed by the water-channel side walls. High spatial and temporal resolution vertical and crosswind profiles of fluctuations in the plume were obtained using a linescan camera laser-induced dye tracer fluorescence technique. A semi-empirical algebraic mean velocity shear history model was developed to predict these concentration statistics. This shear history concentration fluctuation model requires only a minimal set of parameters to be known: atmospheric stability, surface roughness, vertical velocity profile, and vertical and crosswind plume spreads. The universal shear history parameter used was the mean velocity shear normalized by surface friction velocity, plume travel time, and local mean wind speed. The reference height at which this non-dimensional shear history was calculated was important, because both the source and the receptor positions influence the history of particles passing through the receptor position.     

A Parameterization of Dry Thermals and Shallow Cumuli for Mesoscale Numerical Weather Prediction

For numerical weather prediction models and models resolving deep convection, shallow convective ascents are subgrid processes that are not parameterized by classical local turbulent schemes. The mass flux formulation of convective mixing is now largely accepted as an efficient approach for parameterizing the contribution of larger plumes in convective dry and cloudy boundary layers. We propose a new formulation of the EDMF scheme (for Eddy Diffusivity\Mass Flux) based on a single updraft that improves the representation of dry thermals and shallow convective clouds and conserves a correct representation of stratocumulus in mesoscale models. The definition of entrainment and detrainment in the dry part of the updraft is original, and is specified as proportional to the ratio of buoyancy to vertical velocity. In the cloudy part of the updraft, the classical buoyancy sorting approach is chosen. The main closure of the scheme is based on the mass flux near the surface, which is proportional to the sub-cloud layer convective velocity scale w _*. The link with the prognostic grid-scale cloud content and cloud cover and the projection on the non- conservative variables is processed by the cloud scheme. The validation of this new formulation using large-eddy simulations focused on showing the robustness of the scheme to represent three different boundary layer regimes. For dry convective cases, this parameterization enables a correct representation of the countergradient zone where the mass flux part represents the top entrainment (IHOP case). It can also handle the diurnal cycle of boundary-layer cumulus clouds (EUROCS\ARM) and conserve a realistic evolution of stratocumulus (EUROCS\FIRE).     

基于多源资料的积层混合云降水微物理特征

基于地基云雷达、微雨雷达和天气雷达等遥测设备观测资料,结合挂载KPR云雷达和DMT粒子测量系统的飞机平台,详细分析了山东积层混合云降水过程的云降水微物理结构特征。结果表明,积层混合云降水过程呈现层状云和对流云降水特征。零度层以上,5～6 km高度层内,对流云降水多普勒速度和谱宽均大于层状云,说明对流云降水环境垂直气流、粒子尺度等均大于层状云。对流云降水,云雷达和微雨雷达时空剖面上出现由衰减造成的“V”字形缺口,云雷达衰减程度大于微雨雷达,且随高度增加,衰减越大。层状云降水,零度层亮带附近,雷达反射率因子跃增高度比多普勒速度高80 m,多普勒速度跃增高度又比谱宽高20 m。降水云系零度层附近降水机制复杂,粒子形态有辐枝冰晶聚合物、针状冰晶聚合物和云滴;0°C层以上,5～6 km处,对流云降水的多普勒速度和谱宽均大于层状云降水,即对流云降水环境垂直气流、粒子尺度范围等均大于层状云降水。     

On the Correlation between Convective Plume Updrafts and Downdrafts,Lidar Reflectivity and Depolarization Ratio

We question the correlation between vertical velocity (w) on the one hand and the occurrence of convective plumes in lidar reflectivity (i.e. range corrected backscatter signal Pz ²) and depolarization ratio (Δ) on the other hand in the convective boundary layer (CBL). Thermal vertical motion is directly investigated using vertical velocities measured by a ground-based Doppler lidar operating at 2 μm. This lidar provides also simultaneous measurements of lidar reflectivity. In addition, a second lidar 200 m away provides reflectivities at 0.53 and 1 μm and depolarization ratio at 0.53 μm. The time series from the two lidars are analyzed in terms of linear correlation coefficient (ρ). The main result is that the plume-like structures provided by lidar reflectivity within the CBL as well as the CBL height are not a clear signature of updrafts. It is shown that the lidar reflectivity within the CBL is frequently anti-correlated (ρ (w, Pz ² )) with the vertical velocity. On the contrary, the correlation coefficient between the depolarization ratio and the vertical velocity ρ (w, Δ ) is always positive, showing that the depolarization ratio is a fair tracer of updrafts. The importance of relative humidity on the correlation coefficient is discussed. An erratum to this article can be found at     

Resolved Versus Parametrized Boundary-Layer Plumes. Part II: Continuous Formulations of Mixing Rates for Mass-Flux Schemes

The conditional sampling of coherent structures in large-eddy simulations of the convective boundary layer (Couvreux et al. Boundary-layer Meteorol 134:441–458, 2010) is used to propose and evaluate formulations of fractional entrainment and detrainment rates for mass-flux schemes. The proposed formulations are physically-based and continuous from the surface to the top of clouds. Entrainment is related to the updraft vertical velocity divergence, while detrainment depends on the thermal vertical velocity, on buoyancy and on the moisture contrast between the mean plume and its environment. The proposed formulations are first directly evaluated in simulations of shallow clouds. They are then tested in single-column simulations with the thermal plume model, a mass-flux representation of boundary-layer thermals.     

A study of microphysical properties within a precipitation system using wind profiler spectra

This study investigates microphysical properties from wind profiler Doppler spectra observed within a precipitation system that produced high rainfall rates up to 40 mm hr^?1 near the southern coast of the Korean Peninsula on 25～26 June 2010. A 1290-MHz wind profiler located in the National Center for Intensive Observation of Severe Weather at Boseong, Korea, observed a widespread stratiform region and short-lived convective cells from 1850 UTC 25 to 0200 UTC 26 June 2010. By using a spectral model applied to observed profiler spectra, rainfall parameters and raindrop size distributions were retrieved below a melting layer during this period. Three representative periods during precipitation were selected based on intensities of bright band and characteristics in vertical profiles of radar reflectivity and Doppler velocity. During a brief convective period (～30 min), radar reflectivity tended to be proportional to vertical air motion (positive upward), suggesting that updrafts up to ～3 m s^?1 over a large vertical extent through the melting layer probably contributed to increasing rainfall rates at the surface. In reflectivityrainfall rate distributions, large drop spectra (high reflectivity) were analyzed within downdrafts and small drop spectra (low reflectivity) within updrafts, similar to the large and small drop spectra but found in stratiform and convective regions, respectively, in previous studies. This indicates that the degree of spread between reflectivity and rainfall rate may be strongly dependent on positive and negative magnitudes of vertical air motion. For three categories of vertical air motion (i.e., updrafts, neutral, and downdrafts), physical relations between the retrieved rainfall parameters were examined.     

A study of convective elements in the atmospheric surface layer

A statistical model, based on a method of Vulf'son, is used to examine some of the plume-like temperature structures formed in the unstable boundary layer. The model assumes that the plume diameter changes slowly with height so that a cylindrical approximation may be made. Measurements of the vertical velocity and temperature were used to determine the temperature dependent portion of the vertical velocity field. Temperature data were collected from sensors on a tower and from aircraft; velocity data were collected only from the tower.Using this model for analysis of the data indicates that: (1) the average isotherm diameter and the population of isotherms are a function ofz/L; (2) the distribution of core temperatures is approximately a uniform distribution.Independent of the model, a convective velocity was determined and found to have approximately the same profile as the temperature; from this the average velocity of the plumes was found to be a linear function ofz/L, fromz/L - 0.1 toz/L - 1.0. As a consequence of this functional dependence, the entrainment into the plumes is approximately constant over this range. The cumulative temperature distribution function was found to be an asymmetric function ofz/L. A simple relation which is independent ofu _* is given to determine the heat flux.Contribution No. 269 Dept. of Atmospheric Sciences, University of Washington.     

The effects of mixing and spreading on density in near-field river plumes

Water mass modification in surface-trapped, near-field river plumes is examined using a 1.5-layer reduced gravity model and a three-dimensional numerical model. Solutions to the layer model are shown to be qualitatively similar to previous observations and three-dimensional simulations of near-field plumes. Analytic analysis of the layer model demonstrates how the near-field plume is controlled by the competing processes of mixing and spreading. The two models are then used to explore the parameter space dependence of density changes within the near-field plume and their associated cross-shore length scales. Both the magnitude of density changes and their length scales are proportional to either estuarine discharge or fresh water discharge; density changes are also inversely proportional to the estuary mouth width. One surprising feature of the parameter space solutions is that the density of water exiting the near-field plume, a measure of the net dilution of the entire near-field plume, is shown to be inversely proportional to local mixing rates. This is because when local mixing is lower, the influence of plume spreading becomes greater; this spreading accelerates the plume, requiring more net mixing to bring the plume back to subcritical flow.