A comparative study on isotopic composition of precipitation in wet tropic and semi-arid stations across southern India

Isotopic composition of monthly composite precipitation samples from Kozhikode (n = 31), a wet tropic station and Hyderabad (n = 25), a semi-arid station across southern India were studied for a period of four years from 2005 to 2008. During the study period, the Kozhikode station recorded an average rainfall of 3500 mm while the Hyderabad station showed an average rainfall of 790 mm. The average stable isotope values in precipitation at the Kozhikode station were δ ¹⁸O = −3.52‰, d-excess = 13.72‰; δ ¹⁸O = −2.94‰, d-excess = 10.57‰; and δ ¹⁸O = −7.53‰, d-excess = 13.79‰, respectively during the pre-monsoon (March–May), monsoon (June–September) and post-monsoon (October–February) seasons. For the Hyderabad station, the average stable isotope values were δ ¹⁸O = −5.88‰, d-excess = 2.34‰; δ ¹⁸O = −4.39‰, d-excess = 9.21‰; and δ ¹⁸O = −8.69‰, d-excess = 14.29‰, respectively for the three seasons. The precipitation at the two stations showed distinctive isotopic signatures. The stable isotopic composition of precipitation at the Hyderabad station showed significant variations from the global trend while the Kozhikode station almost followed the global value. These differences are mainly attributed to the latitudinal differences of the two stations coupled with the differences in climatic conditions.     

Hydrochemical and isotopic evidence of recharge,apparent age,and flow direction of groundwater in Mayo Tsanaga River Basin,Cameroon: bearings on contamination

Unplanned exploitation of groundwater constitutes emerging water-related threats to MayoTsanaga River Basin. Shallow groundwater from crystalline and detrital sediment aquifers, together with rain, dams, springs, and rivers were chemically and isotopically investigated to appraise its evolution, recharge source and mechanisms, flow direction, and age which were used to evaluate the groundwater susceptibility to contamination and the basin’s stage of salinization. The groundwater which is Ca–Na–HCO₃ type is a chemically evolved equivalent of surface waters and rain water with Ca–Mg–Cl–SO₄ chemistry. The monsoon rain recharged the groundwater preferentially at an average rate of 74 mm/year, while surface waters recharge upon evaporation. Altitude effect of rain and springs show a similar variation of −0.4‰ for δ¹⁸O/100 m, but the springs which were recharged at 452, 679, and 773 m asl show enrichment of δ¹⁸O through evaporation by 0.8‰ corresponding to 3% of water loss during recharge. The groundwater which shows both local and regional flow regimes gets older towards the basins` margin with coeval enrichment in F⁻ and depletion in NO₃ ⁻. Incidentally, younger groundwaters are susceptible to anthropogenic contamination and older groundwaters are sinks of lithologenic fluoride. The basins salinization is still at an early stage.     

Determining Spatial and Temporal Inputs of Freshwater,Including Submarine Groundwater Discharge,to a Subtropical Estuary Using Geochemical Tracers,Biscayne Bay,South Florida

Geochemical mixing models were used to decipher the dominant source of freshwater (rainfall, canal discharge, or groundwater discharge) to Biscayne Bay, an estuary in south Florida. Discrete samples of precipitation, canal water, groundwater, and bay surface water were collected monthly for 2 years and analyzed for salinity, stable isotopes of oxygen and hydrogen, and Sr²⁺/Ca²⁺ concentrations. These geochemical tracers were used in three separate mixing models and then combined to trace the magnitude and timing of the freshwater inputs to the estuary. Fresh groundwater had an isotopic signature (δ ¹⁸O = −2.66‰, δD −7.60‰) similar to rainfall (δ ¹⁸O = −2.86‰, δD = −4.78‰). Canal water had a heavy isotopic signature (δ ¹⁸O = −0.46‰, δD = −2.48‰) due to evaporation. This made it possible to use stable isotopes of oxygen and hydrogen to separate canal water from precipitation and groundwater as a source of freshwater into the bay. A second model using Sr²⁺/Ca²⁺ ratios was developed to discern fresh groundwater inputs from precipitation inputs. Groundwater had a Sr²⁺/Ca²⁺ ratio of 0.07, while precipitation had a dissimilar ratio of 0.89. When combined, these models showed a freshwater input ratio of canal/precipitation/groundwater of 37%:53%:10% in the wet season and 40%:55%:5% in the dry season with an error of ±25%. For a bay-wide water budget that includes saltwater and freshwater mixing, fresh groundwater accounts for 1–2% of the total fresh and saline water input.     

Stable isotope characterisation of co-existing carbonates from the Holocene Gallocanta lake (NE Spain): palaeolimnological implications

The sedimentary succession of Gallocanta lake, a closed saline lake located in the Iberian Range (NE Spain), documents two successive lacustrine stages: (1) brackish lake stage and (2) shallow saline lake stage. The saline stage corresponds to the present-day situation in which the lake water properties are mainly controlled by a strongly negative annual water balance. The carbonates of the brackish lake stage have relatively constant δ¹⁸O values, however, they are rather high (δ¹⁸O_Do = 2.4‰ and δ¹⁸O_Cc = 4.5‰ mean values) suggesting a hydrologically closed lake with a long residence time of the waters. δ¹⁸O values of carbonates from the saline stage vary greatly, and are lighter than in the previous stage (δ¹⁸O_Do = 0.5‰, δ¹⁸O_Cc = −0.7‰, δ¹⁸O_Mgs = −2.3‰ mean values). These carbonates also precipitated in a hydrologically closed lake, but in equilibrium with a lake water of more variable isotopic composition. The δ¹³C values for carbonates of both stages reflect a mixing of different pools of carbon, but during saline stage δ¹³C values have been more controlled by the equilibrium of the lake waters with atmospheric CO₂. During the current stage, calcite and dolomite precipitate in Gallocanta lake mainly during spring and summer, although dolomite precipitation is more favoured towards the summer. Magnesite precipitates at the beginning of autumn, when the first rainfall re-dissolves the saline surface crust, producing saline waters with a high Mg²⁺ content. The isotopic composition of lake waters sampled in 2005 are far higher than those calculated from the carbonates. It is considered that this could be due to two factors: either because there have not been many extremely dry years (like the year 2005) during the development of the lake, or because the physical and chemical characteristics of the lake waters in such conditions are not appropriate for the development of these minerals.     

Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Sulfur isotopic composition of hydrothermal precipitates from the Lau back-arc: implications for magmatic contributions to seafloor hydrothermal systems

The sulfur isotopic composition of sulfides and barite from hydrothermal deposits at the Valu Fa Ridge back-arc spreading center in the southern Lau Basin has been investigated. Sulfide samples from the White Church area at the northern Valu Fa Ridge have δ³⁴S values averaging +3.8‰ (n= 10) for bulk sphalerite-chalcopyrite mineralization and +4.8‰ for pyrite (n= 10). Barite associated with the massive sulfides exhibits an average of +20.7‰ (n= 10). Massive sulfides from the active Vai Lili hydrothermal field at the central Valu Fa Ridge have much higher δ³⁴S ratios averaging +8.0‰ for bulk sphalerite-chalcopyrite mineralization (n= 5), +9.3‰ for pyrite samples (n= 5), and +8.0‰ and +10.9‰ for a chalcopyrite and a sphalerite separate, respectively. The isotopic composition of barite from the Vai Lili field is similar to that of barite from the White Church area and averages +21.0‰ (n= 8). Sulfide and barite samples from the Hine Hina area at the southern Valu Fa Ridge have δ³⁴S values that are considerably lighter than those observed for samples from the other areas and average −4.9‰ for pyrite (n= 9), −4.0 and −5.7‰ for two samples of sphalerite-chalcopyrite intergrowth, and −3.4‰ for a single chalcopyrite separate. The total spread in the isotopic composition of sulfides from Vai Lili and Hine Hina is more than 20‰ over a distance of less than 30 km. The δ³⁴S values of sulfides at Hine Hina are the lowest values so far reported for volcanic-hosted polymetallic massive sulfides from the modern seafloor. Barite from the Hine Hina field also has unusually light sulfur with δ³⁴S values of +16.1 to +16.7‰ (n= 5). Isotopic compositions of the sulfides at Hine Hina indicate a dramatic decrease in δ³⁴S from ordinary magmatic values and, in the absence of biogenic sulfur and/or boiling, imply a unique ³⁴S-depleted source of probable magmatic origin. Sulfide-barite mineralization in the Hine Hina area is associated with a distinctive alteration assemblage consisting of cristobalite, pyrophyllite, kaolinite, opal-CT, talc, pyrite, native sulfur, and alunite. Similar styles of alteration are typically known from high-sulfidation epithermal systems on land. Alunite-bearing, advanced argillic alteration in the Hine Hina field confirms the role of acidic, volatile-rich fluids, and a δ³⁴S value of +10.4‰ for the sulfur in the alunite is consistent with established kinetic isotope effects which accompany the disproportionation of magmatic SO₂ into H₂S and H₂SO₄. The Hine Hina field occurs near the propagating tip of the Valu Fa back-arc spreading center (i.e., dominated by dike injections and seafloor eruptions) and therefore may have experienced the largest contribution of magmatic volatiles of the three fields. The sulfur isotopic ratios of the hydrothermal precipitates and the presence of a distinctive epithermal-like argillic alteration in the Hine Hina field suggest a direct contribution of magmatic vapor to the hydrothermal system and support the concept that magmatic volatiles may be an important component of some volcanogenic massive sulfide-forming hydrothermal systems. Received: 16 January 1997 / Accepted: 28 October 1997     

Geology and vein tin mineralization in the Dadoushan deposit,Gejiu district,SW China

Vein-type tin mineralization in the Dadoushan deposit, Laochang ore field, Gejiu district, SW China, is predominantly hosted in Triassic carbonate rocks (Gejiu Formation) over cupolas of the unexposed Laochang equigranular granite intrusion. The most common vein mineral is tourmaline, accompanied by skarn minerals (garnet, diopside, epidote, phlogopite) and beryl. The main ore mineral is cassiterite, accompanied by minor chalcopyrite, pyrrhotite, and pyrite, as well as scheelite. The tin ore grade varies with depth, with the highest grades (~1.2 % Sn) prevalent in the lower part of the vein zone. Muscovite ⁴⁰Ar–³⁹Ar dating yielded a plateau age of 82.7 ± 0.7 Ma which defines the age of the vein-type mineralization. Measured sulfur isotope compositions (δ ³⁴S = −4.1 to 3.9 ‰) of the sulfides (arsenopyrite, chalcopyrite, pyrite, and pyrrhotite) indicate that the sulfur in veins is mainly derived from a magmatic source. The sulfur isotope values of the ores are consistent with those from the underlying granite (Laochang equigranular granite, −3.7 to 0.1 ‰) but are different from the carbonate wall rocks of the Gejiu Formation (7.1 to 11.1 ‰). The calculated and measured oxygen and hydrogen isotope compositions of the ore-forming fluids (δ ¹⁸O_H2O = −2.4 to 5.5 ‰, δD = −86 to −77 ‰) suggest an initially magmatic fluid which gradually evolved towards meteoric water during tin mineralization.     

Contrasting fluids and reservoirs in the contiguous Marcona and Mina Justa iron oxide–Cu (–Ag–Au) deposits,south-central Perú

The Marcona–Mina Justa deposit cluster, hosted by Lower Paleozoic metaclastic rocks and Middle Jurassic shallow marine andesites, incorporates the most important known magnetite mineralization in the Andes at Marcona (1.9 Gt at 55.4% Fe and 0.12% Cu) and one of the few major iron oxide–copper–gold (IOCG) deposits with economic Cu grades (346.6 Mt at 0.71% Cu, 3.8 g/t Ag and 0.03 g/t Au) at Mina Justa. The Middle Jurassic Marcona deposit is centred in Ica Department, Perú, and the Lower Cretaceous Mina Justa Cu (Ag, Au) prospect is located 3–4 km to the northeast. New fluid inclusion studies, including laser ablation time-of-flight inductively coupled plasma mass spectrometry (LA-TOF-ICPMS) analysis, integrated with sulphur, oxygen, hydrogen and carbon isotope analyses of minerals with well-defined paragenetic relationships, clarify the nature and origin of the hydrothermal fluid responsible for these contiguous but genetically contrasted deposits. At Marcona, early, sulphide-free stage M-III magnetite–biotite–calcic amphibole assemblages are inferred to have crystallized from a 700–800°C Fe oxide melt with a δ¹⁸O value from +5.2‰ to +7.7‰. Stage M-IV magnetite–phlogopite–calcic amphibole–sulphide assemblages were subsequently precipitated from 430–600°C aqueous fluids with dominantly magmatic isotopic compositions (δ³⁴S = +0.8‰ to +5.9‰; δ¹⁸O = +9.6‰ to +12.2‰; δD = −73‰ to −43‰; and δ¹³C = −3.3‰). Stages M-III and M-IV account for over 95% of the magnetite mineralization at Marcona. Subsequent non-economic, lower temperature sulphide–calcite–amphibole assemblages (stage M-V) were deposited from fluids with similar δ³⁴S (+1.8‰ to +5.0‰), δ¹⁸O (+10.1‰ to +12.5‰) and δ¹³C (−3.4‰), but higher δD values (average −8‰). Several groups of lower (<200°C, with a mode at 120°C) and higher temperature (>200°C) fluids can be recognized in the main polymetallic (Cu, Zn, Pb) sulphide stage M-V and may record the involvement of modified seawater. At Mina Justa, early magnetite–pyrite assemblages precipitated from a magmatic fluid (δ³⁴S = +0.8‰ to +3.9‰; δ¹⁸O = +9.5‰ to +11.5‰) at 540–600°C, whereas ensuing chalcopyrite–bornite–digenite–chalcocite–hematite–calcite mineralization was the product of non-magmatic, probably evaporite-sourced, brines with δ³⁴S ≥ +29‰, δ¹⁸O = 0.1‰ and δ¹³C = −8.3‰. Two groups of fluids were involved in the Cu mineralization stage: (1) Ca-rich, low-temperature (approx. 140°C) and high-salinity, plausibly a basinal brine and (2) Na (–K)-dominant with a low-temperature (approx. 140°C) and low-salinity probably meteoric water. LA-TOF-ICPMS analyses show that fluids at the magnetite–pyrite stage were Cu-barren, but that those associated with external fluids in later stages were enriched in Cu and Zn, suggesting such fluids could have been critical for the economic Cu mineralization in Andean IOCG deposits.     

Oxygen isotopes composition of sapphires from the French Massif Central: implications for the origin of gem corundum in basaltic fields

Alluvial and colluvial gem sapphires are common in the basaltic fields of the French Massif Central (FMC) but sapphire-bearing xenoliths are very rare, found only in the Menet trachytic cone in Cantal. The O-isotope composition of the sapphires ranges between 4.4 and 13.9‰. Two distinct groups have been defined: the first with a restricted isotopic range between 4.4 and 6.8‰ (n = 22; mean δ¹⁸O = 5.6 ± 0.7‰), falls within the worldwide range defined for blue-green-yellow sapphires related to basaltic gem fields (3.0 < δ¹⁸O < 8.2‰, n = 150), and overlaps the ranges defined for magmatic sapphires in syenite (4.4 < δ¹⁸O < 8.3‰, n = 29). A second group, with an isotopic range between 7.6 and 13.9‰ (n = 9), suggests a metamorphic sapphire source such as biotite schist in gneisses or skarns. The δ¹⁸O values of 4.4–4.5‰ for the blue sapphire-bearing anorthoclasite xenolith from Menet is lower than the δ¹⁸O values obtained for anorthoclase (7.7–7.9‰), but suggest that these sapphires were derived from an igneous reservoir in the subcontinental spinel lherzolitic mantle of the FMC. The presence of inclusions of columbite-group minerals, pyrochlore, Nb-bearing rutile, and thorite in these sapphires provides an additional argument for a magmatic origin. In the FMC lithospheric mantle, felsic melts crystallized to form anorthoclasites, the most evolved peraluminous variant of the alkaline basaltic melt. The O-isotopic compositions of the first group suggests that these sapphires crystallized from felsic magmas under upper mantle conditions. The second group of isotopic values, typified for example by the Le Bras sapphire with a δ¹⁸O of 13.9‰, indicates that metamorphic sapphires from granulites were transported to the surface by basaltic magma.     

Recharge source and hydrogeochemical evolution of shallow groundwater in a complex alluvial fan system,southwest of North China Plain

Many cities around the world are developed at alluvial fans. With economic and industrial development and increase in population, quality and quantity of groundwater are often damaged by over-exploitation in these areas. In order to realistically assess these groundwater resources and their sustainability, it is vital to understand the recharge sources and hydrogeochemical evolution of groundwater in alluvial fans. In March 2006, groundwater and surface water were sampled for major element analysis and stable isotope (oxygen-18 and deuterium) compositions in Xinxiang, which is located at a complex alluvial fan system composed of a mountainous area, Taihang Mt. alluvial fan and Yellow River alluvial fan. In the Taihang mountainous area, the groundwater was recharged by precipitation and was characterized by Ca–HCO₃ type water with depleted δ¹⁸O and δD (mean value of −8.8‰ δ¹⁸O). Along the flow path from the mountainous area to Taihang Mt. alluvial fan, the groundwater became geochemically complex (Ca–Na–Mg–HCO₃–Cl–SO₄ type), and heavier δ¹⁸O and δD were observed (around −8‰ δ¹⁸O). Before the surface water with mean δ¹⁸O of −8.7‰ recharged to groundwater, it underwent isotopic enrichment in Taihang Mt. alluvial fan. Chemical mixture and ion exchange are expected to be responsible for the chemical evolution of groundwater in Yellow River alluvial fan. Transferred water from the Yellow River is the main source of the groundwater in the Yellow River alluvial fan in the south of the study area, and stable isotopic compositions of the groundwater (mean value of −8.8‰ δ¹⁸O) were similar to those of transferred water (−8.9‰), increasing from the southern boundary of the study area to the distal end of the fan. The groundwater underwent chemical evolution from Ca–HCO₃, Na–HCO₃, to Na–SO₄. A conceptual model, integrating stiff diagrams, is used to describe the spatial variation of recharge sources, chemical evolution, and groundwater flow paths in the complex alluvial fan aquifer system.     

Stable isotope characteristics and origin of ore-forming fluids in copper-gold-polymetallic deposits within strike-slip pull-apart basin of Weishan-Yongping continental collision orogenic belt, Yunnan Province, China

More than 140 middle-small sized deposits or minerals are present in the Weishan-Yongping ore concentration area which is located in the southern part of a typical Lanping strike-slip and pull-apart basin. It has plenty of mineral resources derived from the collision between the Indian and Asian plates. The ore-forming fluid system in the Weishan-Yongping ore concentration area can be divided into two subsystems, namely, the Zijinshan subsystem and Gonglang arc subsystem. The ore-forming fluids of Cu, Co deposits in the Gonglang arc fluid subsystem have δD values between −83.8‰ and −69‰, δ¹⁸O values between 4.17‰ and 10.45‰, and δ¹³C values between −13.6‰ and 3.7‰, suggesting that the ore-forming fluids of Cu, Co deposits were derived mainly from magmatic water and partly from formation water. The ore-forming fluids of Au, Pb, Zn, Fe deposits in the Zijinshan subsystem have δD values between −117.4‰ and −76‰, δ¹⁸O values between 5.32‰ and 9.56‰, and Δ¹³C values between −10.07‰ and −1.5‰. The ore-forming fluids of Sb deposits have δD values between −95‰ and −78‰, δ¹⁸O values between 4.5‰ and 32.3‰, and Δ¹³C values between −26.4‰ and −1.9‰. Hence, the ore-forming fluids of the Zijinshan subsystem must have been derived mainly from formation water and partly from magmatic water. Affected by the collision between the Indian and Asian plates, ore-forming fluids in Weishan-Yongping basin migrated considerably from southwest to northeast. At first, the Gonglang arc subsystem with high temperature and high salinity was formed. With the development of the ore-forming fluids, the Zijinshan subsystem with lower temperature and lower salinity was subsequently formed. Translated from Mineral Deposits, 2006, 25(1): 60–70 [译自: 矿床地质]     

A fluid inclusion and stable isotope study of 200 Ma of fluid evolution in the Galway Granite, Connemara, Ireland

Fluid inclusions in granite quartz and three generations of veins indicate that three fluids have affected the Caledonian Galway Granite. These fluids were examined by petrography, microthermometry, chlorite thermometry, fluid chemistry and stable isotope studies. The earliest fluid was a H₂O-CO₂-NaCl fluid of moderate salinity (4–10 wt% NaCl eq.) that deposited late-magmatic molybdenite mineralised quartz veins (V₁) and formed the earliest secondary inclusions in granite quartz. This fluid is more abundant in the west of the batholith, corresponding to a decrease in emplacement depth. Within veins, and to the east, this fluid was trapped homogeneously, but in granite quartz in the west it unmixed at 305–390 °C and 0.7–1.8 kbar. Homogeneous quartz δ¹⁸O across the batholith (9.5 ± 0.4‰n = 12) suggests V₁ precipitation at high temperatures (perhaps 600 °C) and pressures (1–3 kbar) from magmatic fluids. Microthermometric data for V₁ indicate lower temperatures, suggesting inclusion volumes re-equilibrated during cooling. The second fluid was a H₂O-NaCl-KCl, low-moderate salinity (0–10 wt% NaCl eq.), moderate temperature (270–340 °C), high δD (−18 ± 2‰), low δ¹⁸O (0.5–2.0‰) fluid of meteoric origin. This fluid penetrated the batholith via quartz veins (V₂) which infill faults active during post-consolidation uplift of the batholith. It forms the most common inclusion type in granite quartz throughout the batholith and is responsible for widespread retrograde alteration involving chloritization of biotite and hornblende, sericitization and saussuritization of plagioclase, and reddening of K-feldspar. The salinity was generated by fluid-rock interactions within the granite. Within granite quartz this fluid was trapped at 0.5–2.3 kbar, having become overpressured. This fluid probably infiltrated the Granite in a meteoric-convection system during cooling after intrusion, but a later age cannot be ruled out. The final fluid to enter the Granite and its host rocks was a H₂O-NaCl-CaCl₂-KCl fluid with variable salinity (8–28 wt% NaCl eq.), temperature (125–205 °C), δD (−17 to −45‰), δ¹⁸O (−3 to + 1.2‰), δ¹³C_CO2 (−19 to 0‰) and δ³⁴S_sulphate (13–23‰) that deposited veins containing quartz, fluorite, calcite, barite, galena, chalcopyrite sphalerite and pyrite (V₃). Correlations of salinity, temperature, δD and δ¹⁸O are interpreted as the result of mixing of two fluid end-members, one a high-δD (−17 to −8‰), moderate-δ¹⁸O (1.2–2.5‰), high-δ¹³C_CO2 (> −4‰), low-δ³⁴S_sulphate (13‰), high-temperature (205–230 °C), moderate-salinity (8–12 wt% NaCl eq.) fluid, the other a low-δD (−61 to −45‰), low-δ¹⁸O (−5.4 to −3‰), low-δ¹³C (<−10‰), high-δ³⁴S_sulphate (20–23‰) low-temperature (80–125 °C), high-salinity (21–28 wt% NaCl eq.) fluid. Geochronological evidence suggests V₃ veins are late Triassic; the high-δD end-member is interpreted as a contemporaneous surface fluid, probably mixed meteoric water and evaporated seawater and/or dissolved evaporites, whereas the low-δD end-member is interpreted as a basinal brine derived from the adjacent Carboniferous sequence. This study demonstrates that the Galway Granite was a locus for repeated fluid events for a variety of reasons; from expulsion of magmatic fluids during the final stages of crystallisation, through a meteoric convection system, probably driven by waning magmatic heat, to much later mineralisation, concentrated in its vicinity due to thermal, tectonic and compositional properties of granite batholiths which encourage mineralisation long after magmatic heat has abated. Received: 3 April 1996 / Accepted: 5 May 1997     

The origin of high δ<Superscript>18</Superscript>O zircons: marbles,megacrysts, and metamorphism

The oxygen isotope ratios (δ¹⁸O) of most igneous zircons range from 5 to 8‰, with 99% of published values from 1345 rocks below 10‰. Metamorphic zircons from quartzite, metapelite, metabasite, and eclogite record δ¹⁸O values from 5 to 17‰, with 99% below 15‰. However, zircons with anomalously high δ¹⁸O, up to 23‰, have been reported in detrital suites; source rocks for these unusual zircons have not been identified. We report data for zircons from Sri Lanka and Myanmar that constrain a metamorphic petrogenesis for anomalously high δ¹⁸O in zircon. A suite of 28 large detrital zircon megacrysts from Mogok (Myanmar) analyzed by laser fluorination yields δ¹⁸O from 9.4 to 25.5‰. The U–Pb standard, CZ3, a large detrital zircon megacryst from Sri Lanka, yields δ¹⁸O = 15.4 ± 0.1‰ (2 SE) by ion microprobe. A euhedral unzoned zircon in a thin section of Sri Lanka granulite facies calcite marble yields δ¹⁸O = 19.4‰ by ion microprobe and confirms a metamorphic petrogenesis of zircon in marble. Small oxygen isotope fractionations between zircon and most minerals require a high δ¹⁸O source for the high δ¹⁸O zircons. Predicted equilibrium values of Δ¹⁸O(calcite-zircon) = 2–3‰ from 800 to 600°C show that metamorphic zircon crystallizing in a high δ¹⁸O marble will have high δ¹⁸O. The high δ¹⁸O zircons (>15‰) from both Sri Lanka and Mogok overlap the values of primary marine carbonates, and marbles are known detrital gemstone sources in both localities. The high δ¹⁸O zircons are thus metamorphic; the 15–25‰ zircon values are consistent with a marble origin in a rock-dominated system (i.e., low fluid_(external)/rock); the lower δ¹⁸O zircon values (9–15‰) are consistent with an origin in an external fluid-dominated system, such as skarn derived from marble, although many non-metasomatized marbles also fall in this range of δ¹⁸O. High δ¹⁸O (>15‰) and the absence of zoning can thus be used as a tracer to identify a marble source for high δ¹⁸O detrital zircons; this recognition can aid provenance studies in complex metamorphic terranes where age determinations alone may not allow discrimination of coeval source rocks. Metamorphic zircon megacrysts have not been reported previously and appear to be associated with high-grade marble. Identification of high δ¹⁸O zircons can also aid geochronology studies that seek to date high-grade metamorphic events due to the ability to distinguish metamorphic from detrital zircons in marble.     

Origin of the Nchanga copper–cobalt deposits of the Zambian Copperbelt

The Zambian Copperbelt forms the southeastern part of the 900-km-long Neoproterozoic Lufilian Arc and contains one of the world’s largest accumulations of sediment-hosted stratiform copper mineralization. The Nchanga deposit is one of the most significant ore systems in the Zambian Copperbelt and contains two major economic concentrations of copper and cobalt, hosted within the Lower Roan Group of the Katangan Supergroup. A Lower Orebody (copper only) and Upper Orebody (copper and cobalt) occur towards the top of arkosic units and within the base of overlying shales. The sulfide mineralogy includes pyrite, bornite, chalcopyrite, and chalcocite, although in the Lower Orebody, sulfide phases are partially or completely replaced by malachite and copper oxides. Carrollite is the major cobalt-bearing phase and is restricted to fault-propagation fold zones within a feldspathic arenite. Hydrothermal alteration minerals include dolomite, phlogophite, sericite, rutile, quartz, tourmaline, and chlorite. Quartz veins from the mine sequence show halite-saturated fluid inclusions, ranging from ~31 to 38 wt% equivalent NaCl, with homogenisation temperatures (Th_TOT) ranging between 140 and 180°C. Diagenetic pyrites in the lower orebody show distinct, relatively low δ ³⁴S, ranging from −1 to −17‰ whereas arenite- and shale-hosted copper and cobalt sulfides reveal distinctly different δ ³⁴S from −1 to +12‰ for the Lower Orebody and +5 to +18‰ for the Upper Orebody. There is also a clear distinction between the δ ³⁴S mean of +12.1±3.3‰ (n=65) for the Upper Orebody compared with +5.2±3.6‰ (n=23) for the Lower Orebody. The δ ¹³C of dolomites from units above the Upper Orebody give δ ¹³C values of +1.4 to +2.5‰ consistent with marine carbon. However, dolomite from the shear-zones and the alteration assemblages within the Upper Orebody show more negative δ ¹³C values: −2.9 to −4.0‰ and −5.6 to −8.3‰, respectively. Similarly, shear zone and Upper Orebody dolomites give a δ ¹⁸O of +11.7 to +16.9‰ compared to Lower Roan Dolomites, which show δ ¹⁸O of +22.4 to +23.0‰_. Two distinct structural regimes are recognized in the Nchanga area: a weakly deformed zone consisting of basement and overlying footwall siliciclastics, and a moderate to tightly folded zone of meta-sediments of the Katangan succession. The fold geometry of the Lower Roan package is controlled by internal thrust fault-propagation folds, which detach at the top of the lowermost arkose or within the base of the overlying stratigraphy and show vergence towards the NE. Faulting and folding are considered to be synchronous, as folding predominantly occurred at the tips of propagating thrust faults, with local thrust breakthrough. The data from Nchanga suggests a strong link between ore formation and the development of structures during basin inversion as part of the Lufilian Orogeny. Sulfides tend to be concentrated within arenites or coarser-grained layers within shale units, suggesting that host-rock porosity and possibly permeability played a role in ore formation. However, sulfides are also commonly orientated along, but not deformed by, a tectonic fabric or hosted within small fractures that suggest a significant role for deformation in the development of the mineralization. The ore mineralogy, hydrothermal alteration, and stable isotope data lend support to models consistent with the thermochemical reduction of a sulfate- (and metal) enriched hydrothermal fluid, at the site of mineralization. There is no evidence at Nchanga for a contribution of bacteriogenic sulfide, produced during sedimentation or early diagenesis, to the ores.Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.Editorial handling: H. Frimmel     

Sea level and paleotemperature records from a mid-Holocene reef on the North coast of Java, Indonesia

Mid-Holocene age fossil-fringing reefs occur along the tectonically stable north coast of Java, Indonesia, presenting an opportunity for sea level and paleoclimate reconstruction. The fossil reef at Point Teluk Awur, near Jepara, Central Java, contains two directly superposed horizons of Porites lobata microatolls. Corals in the lower horizon, 80 cm above modern sea level, yielded Uranium series dates of 7090 ± 90 year BP, while corals in the upper horizon at 1.5 m grew at 6960 ± 60 year BP. These dates match the transgressive phase of regional sea-level curves, but suggest a mid-Holocene highstand somewhat older than that recorded on mid-Pacific islands. Paleotemperature was calibrated using Sr/Ca and δ¹⁸O values of a modern P. lobata coral and the locally measured sea surface temperature (SST), yielding SST–Sr/Ca and SST–δ¹⁸O calibration equations [T _Sr/Ca = 91.03–7.35(Sr/Ca) and T_{d¹⁸ \textO} T_{{\delta^{18} {\text{O}}}}  = −3.77 to −5.52(δ¹⁸O)]. The application of the local equations to Sr/Ca and δ¹⁸O measurements on these corals yielded a range of temperatures of 28.8 ± 1.7°C, comparable to that of the modern Java Sea (28.4 ± 0.7°C). A paleo-salinometer [Δδ¹⁸O = ∂δ¹⁸O/∂T ( T_{d¹⁸ \textO} T_{{\delta^{18} {\text{O}}}}  − T _Sr/Ca)], re-calculated using the local parameters, also suggests Java Sea mid-Holocene paleosalinity similar to modern values.     

H and O isotopic compositions of layered silicates in metasomatites from the Gai Zn-Cu massive sulfide deposit, southern urals

Substantial differences in isotopic compositions of micas and pyrophyllites from metasomatites related to various stages of the process that formed the giant Gai massive sulfide deposit have been established. The illite from the earliest and predominant chlorite-illite-quartz metasomatite is characterized by the least δD values of −(50–85)‰ and δ¹⁸O=7–11‰. The pyrophyllite-quartz metasomatite as well as illite and pyrophyllite schists developed locally in the southern part of the deposit that likely correspond to the site of discharge of late geothermal paleosystem, contain pyrophyllite and illite with much higher values of δD=−(25–45)‰ and δ¹⁸O=4–9‰. Local zones of illite-paragonite schist complete the mineral formation and are characterized by the transitional δD values of −(30–55)‰ and elevated δ¹⁸O of 10–11‰. The most plausible model of isotopic evolution in the hydrothermal system, with an initial temperature of mica formation at 250°C, assumes the mixing of transformed sea water with a magmatic (metamorphic) water at the initial stage when the background metasomatites and massive sulfide orebodies of the northern lode have been formed. Subsequently, after the burial of the northern lode beneath basaltic andesite flows, the repeated sea water invasions took place in the southern discharge site of the system. As a result, the pyrophyllite-quartz metasomatite was formed; the pyrophyllite and illite schists originated in tectonic compression zones. The interaction of this water with silicate rocks was completed by a formation of illite-paragonite schist. In general, the substantial contribution of sea water to the formation of metasomatic halo of the deposit casts no doubt.     

Oxygen isotope constraints on the petrogenesis of the Sybille intrusion of the Proterozoic Laramie Anorthosite Complex

The origin of monzonitic intrusions that are associated with Proterozoic massif-type anorthosite complexes is controversial. A detailed oxygen isotope study of the Sybille intrusion, a monzonitic intrusion of the Laramie Anorthosite Complex (Wyoming), indicates that either derivation from a basaltic magma of mantle origin with a metasedimentary component (∼20%) incorporated early in its magmatic history, or a partial melt of lower crustal rocks is consistent with the data. The oxygen isotope compositions of plagioclase, pyroxene and zircon from the Sybille monzosyenite, the dominant rock type in the Sybille intrusion, were analyzed in order to establish the isotopic composition of the source of the magma. Plagioclase δ¹⁸O values range from 6.77 to 9.17‰. We interpret the higher plagioclase δ¹⁸O values (average 8.69 ± 0.30‰, n = 19) to be magmatic in origin, lower plagioclase δ¹⁸O values (average 7.51 ± 0.44‰, n = 22) to be the result of variable subsolidus alteration, and pyroxene δ¹⁸O values (average 6.34 ± 0.38‰, n = 19) to be the result of closed-system diffusional exchange during cooling. Low magnetic zircons, which have been shown to retain magmatic oxygen isotope values despite high grade metamorphism and extensive subsolidus hydrothermal alteration, have δ¹⁸O values (7.40 ± 0.24‰, n = 11) which are consistent with our interpretation of the plagioclase and pyroxene results. Oxygen isotope data from all three minerals indicate that the magmatic oxygen isotope composition of the Sybille intrusion is enriched in ¹⁸O relative to the composition of average or “normal” mantle-derived magmas. This enrichment is approximately twice the oxygen isotope enrichment that could result from closed-system fractionation, rendering a closed-system, comag- matic petrogenetic model between the Sybille intrusion and the mantle-derived anorthositic lithologies of the Laramie Anorthosite Complex improbable. Received: 7 April 1998 / Accepted: 19 January 1999     

Multiple origins of zircons in jadeitite

Jadeitites form from hydrothermal fluids during high pressure metamorphism in subduction environments; however, the origin of zircons in jadeitite is uncertain. We report ion microprobe analyses of δ¹⁸O and Ti in zircons, and bulk δ¹⁸O data for the jadeitite whole-rock from four terranes: Osayama serpentinite mélange, Japan; Syros mélange, Greece; the Motagua Fault zone, Guatemala; and the Franciscan Complex, California. In the Osayama jadeitite, two texturally contrasting groups of zircons are identified by cathodoluminescence and are distinct in δ¹⁸O: featureless or weakly zoned zircons with δ¹⁸O = 3.8 ± 0.6‰ (2 SD, VSMOW), and zircons with oscillatory or patchy zoning with higher δ¹⁸O = 5.0 ± 0.4‰. Zircons in phengite jadeitite from Guatemala and a jadeitite block from Syros have similar δ¹⁸O values to the latter from Osayama: Guatemala zircons are 4.8 ± 0.7‰, and the Syros zircons are 5.2 ± 0.5‰ in jadeitite and 5.2 ± 0.4‰ in associated omphacitite, glaucophanite and chlorite-actinolite rinds. The δ¹⁸O values for most zircons above fall within the range measured by ion microprobe in igneous zircons from oxide gabbros and plagiogranites in modern ocean crust (5.3 ± 0.8‰) and measured in bulk by laser fluorination of zircons in equilibrium with primitive magma compositions or the mantle (5.3 ± 0.6‰). Titanium concentrations in these zircons vary between 1 and 19 ppm, within the range for igneous zircons worldwide. Values of δ¹⁸O (whole-rock) ≅ δ¹⁸O (jadeite) and vary from 6.3 to 10.1‰ in jadeitites in all four areas.     

A fluid inclusion and isotopic study of an intrusion-related gold deposit (IRGD) setting in the 380 Ma South Mountain Batholith,Nova Scotia,Canada: evidence for multiple fluid reservoirs

A set of sheeted quartz veins cutting 380 Ma monzogranite at Sandwich Point, Nova Scotia, Canada, provide an opportunity to address issues regarding fluid reservoirs and genesis of intrusion-related gold deposits. The quartz veins, locally with arsenopyrite (≤5%) and elevated Au–(Bi–Sb–Cu–Zn), occur within the reduced South Mountain Batholith, which also has other zones of anomalous gold enrichment. The host granite intruded (P = 3.5 kbars) Lower Paleozoic metaturbiditic rocks of the Meguma Supergroup, well known for orogenic vein gold mineralization. Relevant field observations include the following: (1) the granite contains pegmatite segregations and is cut by aplitic dykes and zones (≤1–2 m) of spaced fracture cleavage; (2) sheeted veins containing coarse, comb-textured quartz extend into a pegmatite zone; (3) arsenopyrite-bearing greisens dominated by F-rich muscovite occur adjacent the quartz veins; and (4) vein and greisen formation is consistent with Riedel shear geometry. Although these features suggest a magmatic origin for the vein-forming fluids, geochemical studies indicate a more complex origin. Vein quartz contains two types of aqueous fluid inclusion assemblages (FIA). Type 1 is a low-salinity (≤3 wt.% equivalent NaCl) with minor CO₂ (≤2 mol%) and has T _h = 280–340°C. In contrast, type 2 is a high-salinity (20–25 wt.% equivalent NaCl), Ca-rich fluid with T _h = 160–200°C. Pressure-corrected fluid inclusion data reflect expulsion of a magmatic fluid near the granite solidus (650°C) that cooled and mixed with a lower temperature (400°C), wall rock equilibrated, Ca-rich fluid. Evidence for fluid unmixing, an important process in some intrusion-related gold deposit settings, is lacking. Stable isotopic (O, D, S) analyses for quartz, muscovite and arsenopyrite samples from vein and greisens indicate the following: (1) δ¹⁸O_qtz = +11.7‰ to 17.8‰ and δ¹⁸O_musc = +10.7‰ to +11.2‰; (2) δD_musc = −44‰ to−54‰; and (3) δ³⁴S_aspy = +7.8‰ to +10.3‰. These data are interpreted, in conjunction with fluid inclusion data, to reflect contamination of a magmatic-derived fluid (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≤ +10‰) by an external fluid (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≥ +15‰), the latter having equilibrated with the surrounding metasedimentary rocks. The δ³⁴S data are inconsistent with a direct igneous source based on other studies for the host intrusion (d¹⁸O_H2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  = +5‰) and are, instead, consistent with an external reservoir for sulphur based on δ³⁴S_H2S data for the surrounding metasedimentary rocks. Divergent fluid reservoirs are also supported by analyses of Pb isotopes for pegmatitic K-feldspar and vein arsenopyrite. Collectively the data indicate that the vein- and greisen-forming fluids had a complex origin and reflect both magmatic and non-magmatic reservoirs. Thus, although the geological setting suggests a magmatic origin, the geochemical data indicate involvement of multiple reservoirs. These results suggest multiple reservoirs for this intrusion-related gold deposit setting and caution against interpreting the genesis of intrusion-related gold deposit mineralization in somewhat analogous settings based on a limited geochemical data set.