Diagnosis of landslide risk for individual buildings: insights from Prahova Subcarpathians,Romania

The aim of this study is to quantify the landslide risk for individual buildings using spatial data in a GIS environment. A landslide-prone area from Prahova Rivers’ Subcarpathian Valley was chosen because of its associated landslide hazards and its impact upon human settlements and activities. The bivariate landslide susceptibility index (LSI) was applied to calculate the spatial probability of landslides occurrence. The Landslide Susceptibility Index map was produced by numerically adding the weighted thematic maps for slope gradient and aspect, water table, soil texture, lithology, built environment and land use. Validation curves were obtained using the random-split strategy for two combinations of variables: (a) all seven variables and (b) three variables which showed highest individual success rates with respect to landslides occurrences (slope gradient, water table and land use). The principal pre-disposing factors were found to be slope steepness and groundwater table. Vulnerability was established as the degree of loss to individual buildings resulting from a potential damaging landslide with a given return period in an area. Risk was calculated by multiplying the spatial probability of landslides by the vulnerability for each building and summing up the losses for the selected return period.     

The 2010 Yushu earthquake triggered landslide hazard mapping using GIS and weight of evidence modeling

The Yushu County, Qinghai Province, China, April 14, 2010, earthquake triggered thousands of landslides in a zone between 96°20′32.9″E and 97°10′8.9″E, and 32°52′6.7″N and 33°19′47.9″N. This study examines the use of geographic information system (GIS) technology and Bayesian statistics in creating a suitable landslide hazard-zone map of good predictive power. A total of 2,036 landslides were interpreted from high-resolution aerial photographs and multi-source satellite images pre- and post-earthquake, and verified by selected field checking before a final landslide-inventory map of the study area could be established using GIS software. The 2,036 landslides were randomly partitioned into two subsets: a training dataset, which contains 80 % (1,628 landslides), for training the model; and a testing dataset 20 % (408 landslides). Twelve earthquake triggered landslide associated controlling parameters, such as elevation, slope gradient, slope aspect, slope curvature, topographic position, distance from main surface ruptures, peak ground acceleration, distance from roads, normalized difference vegetation index, distance from drainages, lithology, and distance from all faults were obtained from variety of data sources. Landslide hazard indices were calculated using the weight of evidence model. The landslide hazard map was compared with training data and testing data to obtain the success rate and predictive rate of the model, respectively. The validation results showed satisfactory agreement between the hazard map and the existing landslide distribution data. The success rate is 80.607 %, and the predictive rate is 78.855 %. The resulting landslide hazard map showed five classes of landslide hazard, i.e., very high, high, moderate, low and very low. The landslide hazard evaluation map should be useful for environmental recovery planning and reconstruction work.     

Assessing LNRF,FR, and AHP models in landslide susceptibility mapping index: a comparative study of Nojian watershed in Lorestan province,Iran

Landslides and slope instabilities are major risks for human activities which often lead to economic losses and human fatalities all over the world. The main purpose of this study is to evaluate and compare the results of Landslide Nominal Risk Factor (LNRF), Frequency Ratio (FR), and Analytical Hierarchy Process (AHP) models in mapping Landslide Susceptibility Index (LSI). The study case, Nojian watershed with an area of 344.91 km², is located in Lorestan province of Iran. The procedure was as follows: first, the effective factors of the landslide basin were prepared for each layer in the GIS software. Then, the layers and the landslides of the basin were also prepared using aerial photographs, satellite images, and fieldwork. Next, the effective factors of the layers were overlapped with the map of landslide distribution to specify the role of units in such distribution. Finally, nine factors including lithology, slope, aspect, altitude, distance from the fault, distance from river, fault land use, rainfall, and altitude were found to be effective elements in landslide occurrence of the basin. The final maps of LSI were prepared based on seven factors using LNRF, FR, and AHP models in GIS. The index of the quality sum (Qs) was also used to assess the accuracy of the LSI maps. The results of the three models with LNRF (40%), FR (39%), and AHP (44%) indicated that the whole study area was located in the classes of high to very high hazard. The Qs values for the three models above were also found to be 0.51, 0.70 and 0.70, respectively. In comparison, according to the amount of Qs, the results of AHP and FR models have slightly better performed than the LNRF model in determining the LSI maps in the study area. Finally, the study watershed was classified into five classes based on LSI as very low, low, moderate, high, and very high. The landslide susceptibility maps can be helpful to select sites and mitigate landslide hazards in the study area and the regions with similar conditions.     

Mapping of landslide hazard zonation using GIS at Golestan watershed, northeast of Iran

Landslide hazard zonation is essential for planning future developmental activities. At the present study, after the preparation of a landslide inventory of the study area, nine factors as well as sub-data layers of factor class weights were tested for an integrated analysis of landslide hazard in the region. The produced factor maps were weighted with the analytic hierarchy process method and then classified into four classes—negligible, low, moderate, and high. The final produced map for landslide hazard zonation in Golestan watershed revealed that: (1) about 53.85 % of the basin is prone to moderate and high threats of landslides. (2) Landslide events at the Golestan watershed were strongly correlated to the slope angle of the basin. It was observed that the active landslide zones, including moderate to high landslide hazard classes, have a high correlation to slope classes over 30° (R ²?=?0.769). (3) The regions most susceptible to landslide hazard are those located south and southwest of the watershed, which included rock topples, falls, and debris landslides.     

GIS-based landslide susceptibility for Arsin-Yomra (Trabzon,North Turkey) region

The purpose of this study is to assess the susceptibility of landslides around Yomra and Arsin towns near Trabzon, in northeast of Turkey, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analyses of the topographical map. The landslide triggering factors are considered to be slope angle, slope aspect, distance from drainage, distance from roads and the weathered lithological units, which were called as “geotechnical units” in the study. Idrisi and ArcGIS packages manipulated all the collected data. Logistic regression (LR) and weighted linear combination (WLC) statistical methods were used to create a landslide susceptibility map for the study area. The results were assessed within the scope of two different points: (a) effectiveness of the methods used and (b) effectiveness of the environmental casual parameters influencing the landslides. The results showed that the WLC model is more suitable than the LR model. Regarding the casual parameters, geotechnical units and slopes were found to be the most important variables for estimating the landslide susceptibility in the study area.     

基于要素分析和二元统计模型的区域滑坡危险等级制图——以国道212线陇南段为例

国道212线陇南段是我国地质灾害最发育的地区之一,绘制该区的滑坡危险等级地图对灾害管理和发展规划是极其必要的。基于滑坡的野外调查、机理研究和室内试验等工作,分析了滑坡与各种要素的相关性,选择控制滑坡的9个重要要素作为评价要素,利用GIS和二元统计的信息值模型和滑坡先验风险要素模型绘制了研究区的滑坡危险等级地图。最后,选用区内11个具有明显滑动位移的活动滑坡与滑坡危险等级地图比较,检验其可靠度。结果表明,活动的滑坡绝大部分都位于危险等级很高和高的范围内,说明两种模型的评价结果与研究区实际情况相吻合,同时也反映出信息值模型与实际情况更加相符。     

Landslide susceptibility mapping using GIS and digital photogrammetric techniques: a case study from Ardesen (NE-Turkey)

Ardesen is a settlement area which has been significantly damaged by frequent landslides which are caused by severe rainfalls and result in many casualties. In this study a landslide susceptibility map of Ardesen was prepared using the Analytical Hierarchy Process (AHP) with the help of Geographical Information Systems (GIS) and Digital Photogrametry Techniques (DPT). A landslide inventory, lithology–weathering, slope, aspect, land cover, shear strength, distance to the river, stream density and distance to the road thematics data layers were used to create the map. These layer maps are produced using field, laboratory and office studies, and by the use of GIS and DPT. The landslide inventory map is also required to determine the relationship between these maps and landslides using DPT. In the study field in the Hemsindere Formation there are units that have different weathering classes, and this significantly affects the shear strength of the soil. In this study, shear strength values are calculated in great detail with field and laboratory studies and an additional layer is evaluated with the help of the stability studies used to produce the landslide susceptibility map. Finally, an overlay analysis is carried out by evaluating the layers obtained according to their weight, and the landslide susceptibility map is produced. The study area was classified into five classes of relative landslide susceptibility, namely, very low, low, moderate, high, and very high. Based on this analysis, the area and percentage distribution of landslide susceptibility degrees were calculated and it was found that 28% of the region is under the threat of landslides. Furthermore, the landslide susceptibility map and the landslide inventory map were compared to determine whether the models produced are compatible with the real situation resulting in compatibility rate of 84%. The total numbers of dwellings in the study area were determined one by one using aerial photos and it was found that 30% of the houses, with a total occupancy of approximately 2,300 people, have a high or very high risk of being affected by landslides.     

Different ways of landslide geometry interpretation in a process of statistical landslide susceptibility and hazard assessment: Horná Súča (western Slovakia) case study

The article draws a comparison between different ways of landslide geometry interpretation in the scope of the statistical landslide hazard and risk assessment processing. The landslides are included as a major input variable, which are compared with all of the input parametric factors. Based on the above comparison the input data are classified and the final map of landslide susceptibility is constructed. Methodology of multivariate conditional analysis has been used for the construction of final maps. Unique condition units was developed by combination of geological map (lithological units) and slope angle map. Lithological units were derived from geological map and subsequently reclassified into 22 classes. Slope angle map was calculated from digital elevation model (contour map at a scale 1:10,000) and reclassified into nine classes. As a case study, a wide area of Horná Súča (western Slovakia) strongly affected by landsliding (predominantly made of Flysch) has been chosen. Spatial data in the form of parametric maps, as well as final statistical data set were processed in GIS GRASS environment. Four different approaches are used for landslides interpretation: (1) area of landslide body including accumulation zone, (2) area of depletion zone, (3) lines of elongated main scarps, (4) lines of main scarp upper edge. For each approach, a zoning map of landslide susceptibility was compiled and these were compared with each other. Depending on the interpretation approach, the final susceptibility zones are markedly different (in tens of percent).     

Landslide Hazard Zonation using Remote Sensing and GIS: a case study of Dikrong river basin, Arunachal Pradesh, India

Landslides are among the most costly and damaging natural hazards in mountainous regions, triggered mainly under the influence of earthquakes and/or rainfall. In the present study, Landslide Hazard Zonation (LHZ) of Dikrong river basin of Arunachal Pradesh was carried out using Remote Sensing and Geographic Information System (GIS). Various thematic layers namely slope, photo-lineament buffer, thrust buffer, relative relief map, geology and land use / land cover map were generated using remote sensing data and GIS. The weighting-rating system based on the relative importance of various causative factors as derived from remotely sensed data and other thematic maps were used for the LHZ. The different classes of thematic layers were assigned the corresponding rating value as attribute information in the GIS and an “attribute map” was generated for each data layer. Each class within a thematic layer was assigned an ordinal rating from 0 to 9. Summation of these attribute maps were then multiplied by the corresponding weights to yield the Landslide Hazard Index (LHI) for each cell. Using trial and error method the weight-rating values have been re-adjusted. The LHI threshold values used were: 142, 165, 189 and 216. A LHZ map was prepared showing the five zones, namely “very low hazard”, “low hazard”, “moderate hazard”, “high hazard” and “very high hazard” by using the “slicing” operation.     

A Combined Weight of Evidence and Logistic Regression Method for Susceptibility Mapping of Earthquake-induced Landslides: A Case Study of the April 20, 2013 Lushan Earthquake,China

The Ms 7.0 Lushan earthquake triggered a huge number of landslides. Landslide susceptibility mapping is of great importance. Weight of Evidence (WoE) and Logistic Regression (LR) methods have been widely used for LSM (Landslide Susceptibility Mapping). However, limitations still exist. WoE is capable of assessing the influence of different classes of each factor, but neglects the correlation between factors. LR is able to analyze the relationship among the factors while it is not capable of evaluating the influence of different classes. This paper proposes a combined method of LR and WoE for LSM, taking advantage of their individual merits and overcoming their limitations. An inventory of 1289 landslides was used: 70% were random-selected for training and the remaining for validation. 11 landslide condition factors were employed in the model and the result was validated using Receiver Operating Characteristic (ROC) curve. The results showed that the LR-WoE model had a better accuracy than the LR model, producing an area below the curve with values of 0.802 success and 0.791 predictive, higher than that of the LR model (0.715 success and 0.722 predictive). It is therefore concluded that the combined method of WoE and LR can provide a promising level of accuracy for earthquake-induced landslide susceptibility mapping.     

Slope units-based flow susceptibility model: using validation tests to select controlling factors

A susceptibility map for an area, which is representative in terms of both geologic setting and slope instability phenomena of large sectors of the Sicilian Apennines, was produced using slope units and a multiparametric univariate model. The study area, extending for approximately 90 km², was partitioned into 774 slope units, whose expected landslide occurrence was estimated by averaging seven susceptibility values, determined for the selected controlling factors: lithology, mean slope gradient, stream power index at the foot, mean topographic wetness index and profile curvature, slope unit length, and altitude range. Each of the recognized 490 landslides was represented by its centroid point. On the basis of conditional analysis, the susceptibility function here adopted is the density of landslides, computed for each class. Univariate susceptibility models were prepared for each of the controlling factors, and their predictive performance was estimated by prediction rate curves and effectiveness ratio applied to the susceptibility classes. This procedure allowed us to discriminate between effective and non-effective factors, so that only the former was subsequently combined in a multiparametric model, which was used to produce the final susceptibility map. The validation of this map latter enabled us to verify the reliability and predictive performance of the model. Slope unit altitude range and length, lithology and, subordinately, stream power index at the foot of the slope unit demonstrated to be the main controlling factors of landslides, while mean slope gradient, profile curvature, and topographic wetness index gave unsatisfactory results.     

Landslide hazard and risk assessment: a?case study from the Hlohovec–Sered’ landslide area in south-west Slovakia

Landslide hazard or susceptibility assessment is based on the selection of relevant factors which play a role on the slope instability, and it is assumed that landslides will occur at similar conditions to those in the past. The selected statistical method compares parametric maps with the landslide inventory map, and results are then extrapolated to the entire evaluated territory with a final product of landslide hazard or susceptibility map. Elements at risk are defined and analyzed in relation with landslide hazard, and their vulnerability is thus established. The landslide risk map presents risk scenarios and expected financial losses caused by landslides, and it utilizes prognoses and analyses arising from the landslide hazard map. However, especially the risk scenarios for future in a selected area have a significant importance, the literature generally consists of the landslide susceptibility assessment and papers which attempt to assess and construct the map of the landslide risk are not prevail. In the paper presented herein, landslide hazard and risk assessment using bivariate statistical analysis was applied in the landslide area between Hlohovec and Sered?? cities in the south-western Slovakia, and methodology for the risk assessment was explained in detail.     

Analytic hierarchy process and information value method-based landslide susceptibility mapping and vehicle vulnerability assessment along a highway in Sikkim Himalaya

In hilly areas, highway projects can be a cause of landslides as well as an element of vulnerability due to landslides. Hence, landslide susceptibility mapping of highway corridors can substantially mitigate loss of life and property. For this, a Landslide Susceptibility Assessment Model (LSAM) was developed for a corridor of 27 km along NH 10 in the East Sikkim. Landslide inducing factors viz. Aspect, Distance from Fault, Distance from Road, Drainage Density, Land use and Land cover, Lithology, Plan Curvature, Rainfall, Slope, Soil Depth, and Soil Texture were considered for the study. Results show that areas in proximity to the highway and areas with steeper slope had a higher landslide susceptibility than otherwise. Spatial explicit sensitivity analysis indicated that LSAM was sensitive to distance from the highway and slope. Vehicle vulnerability assessment of base year and horizon years showed that vulnerability increased through time. LSAM is appropriate for hazard mitigation for areas with poor historical data on landslides.     

Estimating potential landslide sites of an upland sub-watershed in Western Ghat’s of Kerala (India) through frequency ratio and GIS

The purpose of this study is to assess the susceptibility of landslides in parts of Western Ghats, Kerala, India, using a geographical information system (GIS). Landslide inventory of the area was made by detailed field surveys and the analysis of the topographical maps. The landslide triggering factors are considered to be slope angle, slope aspect, slope curvature, slope length, distance from drainage, distance from lineaments, lithology, land use and geomorphology. ArcGIS version 8.3 was used to manipulate and analyse all the collected data. Probabilistic-likelihood ratio was used to create a landslide susceptibility map for the study area. The result was validated using the Area under Curve (AUC) method and temporal data of landslide occurrences. The validation results showed satisfactory agreement between the susceptibility map and the existing data on landslide locations. As the result, the success rate of the model was (84.46%) and the prediction rate of the model was (82.38%) shows high prediction accuracy. In the reclassified final landslide susceptibility zone map, 5.68% of the total area is classified as critical in nature. The landslide susceptibility map thus produced can be used to reduce hazards associated with landslides and to land cover planning.     

Assessing landslide exposure in areas with limited landslide information

Landslide risk assessment is often a difficult task due to the lack of temporal data on landslides and triggering events (frequency), run-out distance, landslide magnitude and vulnerability. The probability of occurrence of landslides is often very difficult to predict, as well as the expected magnitude of events, due to the limited data availability on past landslide activity. In this paper, a qualitative procedure for assessing the exposure of elements at risk is presented for an area of the Apulia region (Italy) where no temporal information on landslide occurrence is available. Given these limitations in data availability, it was not possible to produce a reliable landslide hazard map and, consequently, a risk map. The qualitative analysis was carried out using the spatial multi-criteria evaluation method in a global information system. A landslide susceptibility composite index map and four asset index maps (physical, social, economic and environmental) were generated separately through a hierarchical procedure of standardising and weighting. The four asset index maps were combined in order to obtain a qualitative weighted assets map, which, combined with the landslide susceptibility composite index map, has provided the final qualitative landslide exposure map. The resulting map represents the spatial distribution of the exposure level in the study area; this information could be used in a preliminary stage of regional planning. In order to demonstrate how such an exposure map could be used in a basic risk assessment, a quantification of the economic losses at municipal level was carried out, and the temporal probability of landslides was estimated, on the basis of the expert knowledge. Although the proposed methodology for the exposure assessment did not consider the landslide run-out and vulnerability quantification, the results obtained allow to rank the municipalities in terms of increasing exposure and risk level and, consequently, to identify the priorities for designing appropriate landslide risk mitigation plans.     

Landslide susceptibility mapping using Bayesian approach in the Sultan Mountains (Akşehir,Turkey)

Landslides cause heavy damage to property and infrastructure, in addition to being responsible for the loss of human lives in many parts of the Turkey. The paper presents GIS-based spatial data analysis for landslide susceptibility mapping in the regions of the Sultan Mountains, West of Akşehir, and central part of Turkey. Landslides occur frequently in the area and seriously affect local living conditions. Therefore, spatial analysis of landslide susceptibility in the Sultan Mountains is important. The relationships between landslide distributions with the 19 landslide affecting parameters were analysed using a Bayesian model. In the study area, 90 landslides were observed. The landslides were randomly subdivided into 80 training landslides and 10 test landslides. A landslide susceptibility map was produced by using the training landslides. The test landslides were used in the accuracy control of the produced landslide susceptibility map. Approximately 9% of the study area was classified as high susceptibility zone. Medium, low and very low susceptibility zones covered 8, 23 and 60% of the study area, respectively. Most of the locations of the observed landslides actually fall into moderate (17.78%) and high (77.78. %) susceptibility zones of the produced landslide susceptibility map. This validates the applicability of proposed methods, approaches and the classification scheme. The high susceptibility zone is along both sides of the Akşehir Fault and at the north-eastern slope of the Sultan Mountains. It was determined that the surface area of the Harlak and Deresenek formations, which have attained lithological characteristics of clayey limestone with a broken and separated base, and where area landslides occur, possesses an elevation of 1,100–1,600 m, a slope gradient of 25°–35° and a slope aspect of 22.5°–157.5° facing slopes.     

A comparison of landslide susceptibility maps produced by logistic regression, multi-criteria decision, and likelihood ratio methods: a case study at ?zmir, Turkey

The main purpose of this study is to compare the use of logistic regression, multi-criteria decision analysis, and a likelihood ratio model to map landslide susceptibility in and around the city of İzmir in western Turkey. Parameters, such as lithology, slope gradient, slope aspect, faults, drainage lines, and roads, were considered. Landslide susceptibility maps were produced using each of the three methods and then compared and validated. Before the modeling and validation, the observed landslides were separated into two groups. The first group was for training, and the other group was for validation steps. The accuracy of models was measured by fitting them to a validation set of observed landslides. For validation process, the area under curvature (AUC) approach was applied. According to the AUC values of 0.810, 0.764, and 0.710 for logistic regression, likelihood ratio, and multi-criteria decision analysis, respectively, logistic regression was determined to be the most accurate method among the other used landslide susceptibility mapping methods. Based on these results, logistic regression and likelihood ratio models can be used to mitigate hazards related to landslides and to aid in land-use planning.     

Landslide susceptibility mapping based on GIS and information value model for the Chencang District of Baoji,China

The main objective of this study was to apply a statistical (information value) model using geographic information system (GIS) to the Chencang District of Baoji, China. Landslide locations within the study area were identified using reports and aerial photographs, and a field survey. A total of 120 landslides were mapped, of which 84 (70 %) were randomly selected for building the landslide susceptibility model. The remaining 36 (30 %) were used for model validation. We considered a total of 10 potential factors that predispose an area to a landslide for the landslide susceptibility mapping. These included slope degree, altitude, slope aspect, plan curvature, geomorphology, distance from faults, lithology, land use, mean annual rainfall, and peak ground acceleration. Following an analysis of these factors, a landslide susceptibility map was produced using the information value model with GIS. The resulting landslide susceptibility index was divided into five classes (very high, high, moderate, low, and very low) using the natural breaks method. The corresponding distribution area percentages were 29.22, 25.14, 15.66, 15.60, and 14.38 %, respectively. Finally, landslide locations were used to validate the results of the landslide susceptibility map using areas under the curve (AUC). The AUC plot showed that the susceptibility map had a success rate of 81.79 % and a prediction accuracy of 82.95 %. Based on the results of the AUC evaluation, the landslide susceptibility map produced using the information value model exhibited good performance.     

Landslide risk assessment using concepts of danger pixels and fuzzy set theory in Darjeeling Himalayas

Landslide risk assessment (LRA) is a key component of landslide studies. The landslide risk can be defined as the potential for adverse consequences or loss to human population and property due to the occurrence of landslides. The LRA can be regional or site-specific in nature and is an important information for planning various developmental activities in the area. LRA is considered as a function of landslide potential (LP) and resource damage potential (RDP). The LP and RDP are typically characterized by the landslide susceptibility zonation map and the resource map (i.e., land use land cover map) of the area, respectively. Development of approaches for LRA has always been a challenge. In the present study, two approaches for LRA, one based on the concept of danger pixels and the other based on fuzzy set theory, have been developed and implemented to generate LRA maps of Darjeeling Himalayas, India. The LRA map based on the first approach indicates that 1,015 pixels of habitation and 921 pixels of road section are under risk due to landslides. The LRA map derived from fuzzy set theory based approach shows that a part of habitat area (2,496 pixels) is under very high risk due to landslides. Also, another part of habitat area and a portion of road network (7,204 pixels) are under high risk due to landslides. Thus, LRA map based on the concept of danger pixels gives the pixels under different resource categories at risk due to landslides whereas the LRA map based on the concept of fuzzy set theory further refines this result by defining the degree of severity of risk to these categories by putting these into high and low risk zones. Hence, the landslide risk assessment study carried out using two approaches in this paper can be considered in cohesion for assessing the risks due to landslides in a region.