GEOLOGY OF THE NORTHERN ARUN TECTONIC WINDOW

GEOLOGY OF THE NORTHERN ARUN TECTONIC WINDOW1　BordetP .Recherchesg啨ｏｌｏｇｉｑｕｅｓｄａｎｓｌ’ＨｉｍａｌａｙａｄｕＮ啨ｐａｌ,r啨ｇｉｏｎｄｕＭａｋａｌｕ[R].EditionsduCNRS ,Paris ,196 12 75 . 2　BordetP .G啨ｏｌｏｇｉｅｄｅｌａｄａｌｌｅｄｕＴｉｂｅｔ (Himalayacentral) [J].M啨ｍｏｉｒｅｓｈｏｒｓｓ啨ｒｉｅｄｅｌａＳｏｃｉｅｔ啨ｇ啨ｏｌｏｇｉｑｕｅｄｅＦｒａｎｃｅ,1977,8:2 35～ 2 5 0 . 3　BurcfielBC ,ChenZ ,HodgesKV ,etal.TheSouthTibetanDetachmentSystem ,Hima…     

An overview of the stratigraphy and tectonics of the Nepal Himalaya

Nepal can be divided into the following five east–west trending major tectonic zones. (i) The Terai Tectonic Zone which consists of over one km of Recent alluvium concealing the Churia Group (Siwalik equivalents) and underlying rocks of northern Peninsular India. Recently active southward-propagating thrusts and folds beneath the Terai have affected both the underlying Churia and the younger sediments. (ii) The Churia Zone, which consists of Neogene to Quaternary foreland basin deposits and forms the Himalayan mountain front. The Churia Zone represents the most tectonically active part of the Himalaya. Recent sedimentologic, geochronologic and paleomagnetic studies have yielded a much better understanding of the provenance, paleoenvironment of deposition and the ages of these sediments. The Churia Group was deposited between ∼14 Ma and ∼1 Ma. Sedimentary rocks of the Churia Group form an archive of the final drama of Himalayan uplift. Involvement of the underlying northern Peninsular Indian rocks in the active tectonics of the Churia Zone has also been recognised. Unmetamorphosed Phanerozoic rocks of Peninsular India underlying the Churia Zone that are involved in the Himalayan orogeny may represent a transitional environment between the Peninsula and the Tethyan margin of the continent. (iii) The Lesser Himalayan Zone, in which mainly Precambrian rocks are involved, consists of sedimentary rocks that were deposited on the Indian continental margin and represent the southernmost facies of the Tethyan sea. Panafrican diastrophism interrupted the sedimentation in the Lesser Himalayan Zone during terminal Precambrian time causing a widespread unconformity. That unconformity separates over 12 km of unfossiliferous sedimentary rocks in the Lesser Himalaya from overlying fossiliferous rocks which are >3 km thick and range in age from Permo-Carboniferous to Lower to Middle Eocene. The deposition of the Upper Oligocene–Lower Miocene fluvial Dumri Formation records the emergence of the Himalayan mountains from under the sea. The Dumri represents the earliest foreland basin deposit of the Himalayan orogen in Nepal. Lesser Himalayan rocks are less metamorphosed than the rocks of the overlying Bhimphedis nappes and the crystalline rocks of the Higher Himalayan Zone. A broad anticline in the north and a corresponding syncline in the south along the Mahabharat range, as well as a number of thrusts and faults are the major structures of the Lesser Himalayan Zone which is thrust over the Churia Group along the Main Boundary Thrust (MBT). (iv) The crystalline high-grade metamorphic rocks of the Higher Himalayan Zone form the backbone of the Himalaya and give rise to its formidable high ranges. The Main Central Thrust (MCT) marks the base of this zone. Understanding the origin, timing of movement and associated metamorphism along the MCT holds the key to many questions about the evolution of the Himalaya. For example: the question of whether there is only one or whether there are two MCTs has been a subject of prolonged discussion without any conclusion having been reached. The well-known inverted metamorphism of the Himalaya and the late orogenic magmatism are generally attributed to movement along the MCT that brought a hot slab of High Himalayan Zone rocks over the cold Lesser Himalayan sequence. Harrison and his co-workers, as described in a paper in this volume, have lately proposed a detailed model of how this process operated. The rocks of the Higher Himalayan Zone are generally considered to be Middle Cambrian to Late Proterozoic in age. (v) The Tibetan Tethys Zone is represented by Cambrian to Cretaceous-Eocene fossiliferous sedimentary rocks overlying the crystalline rocks of the Higher Himalaya along the Southern Tibetan Detachment Fault System (STDFS) which is a north dipping normal fault system. The fault has dragged down to the north a huge pile of the Tethyan sedimentary rocks forming some of the largest folds on the Earth. Those sediments are generally considered to have been deposited in a more distal part of the Tethys than were the Lesser Himalayan sediments.The present tectonic architecture of the Himalaya is dominated by three master thrusts: the Main Central Thrust (MCT), the Main Boundary Thrust (MBT) and the Main Frontal Thrust (MFT). The age of initiation of these thrusts becomes younger from north to south, with the MCT as the oldest and the MFT as the youngest. All these thrusts are considered to come together at depth in a flat-lying decollement called the Main Himalayan Thrust (MHT). The Mahabharat Thrust (MT), an intermediate thrust between the MCT and the MBT is interpreted as having brought the Bhimphedi Group out over the Lesser Himalayan rocks giving rise to Lesser Himalayan nappes containing crystalline rocks. The position of roots of these nappes is still debated. The Southern Tibetan Detachment Fault System (STDFS) has played an important role in unroofing the higher Himalayan crystalline rocks.     

METAMORPHISM IN THE LESSER HIMALAYAN CRYSTALLINES AND MAIN CENTRAL THRUST ZONE IN THE ARUN VALLEY AND AMA DRIME RANGE (EASTERN HIMALAYA)

METAMORPHISM IN THE LESSER HIMALAYAN CRYSTALLINES AND MAIN CENTRAL THRUST ZONE IN THE ARUN VALLEY AND AMA DRIME RANGE (EASTERN HIMALAYA)1　BrunelM ,KienastJR . tudep啨ｔｒｏ structuraledeschevauchementsductileshimalayenssurlatrans versaledel’Everest Makalu (N啨ｐａｌｏｒｉｅｎｔａｌ) [J].CanadianJ .EarthSciences,1986 ,2 3:1117～ 1137. 2　LombardoB ,RolfoF .TwocontrastingeclogitetypesintheHimalayas :implicationsfortheHimalayanorogeny…     

DIFFERENT VARIETIES OF MIOCENE LEUCOGRANITE IN THE ARUN VALLEY—EVEREST—MAKALU AREA:FIELD RELATIONS, PETROLOGY AND ISOTOPE GEOCHEMISTRY

DIFFERENT VARIETIES OF MIOCENE LEUCOGRANITE IN THE ARUN VALLEY—EVEREST—MAKALU AREA:FIELD RELATIONS, PETROLOGY AND ISOTOPE GEOCHEMISTRY1　AritaK .OriginoftheinvertedmetamorphismoftheLowerHimalayas,CentralNepal[J] .Tectonophysics,1983,93:4 3～6 0 . 　BarbarinB .Areviewoftherelationshipsbetweengranitoidtypes,theiroriginsandtheirgeodynamicenvironments[J] .Lithos,1999,4 6 :6 0 5～ 6 2 6 . 3　BurchfielBC ,ChenZ,HodgesKV ,etal.TheSou…     

The two intracrustal boundary thrusts of the Himalaya

The series of four different, steeply inclined thrusts which sharply sever the youthful autochthonous Cenozoic sedimentary zone, including the Siwalik, from the mature old Lesser Himalayan subprovince is collectively known as the Main Boundary Thrust (MBT). In the proximity of this trust in northwestern and eastern sectors, the parautochtonous Lesser Himalayan sedimentary formations are pushed up and their narrow frontal parts split into imbricate sheets with attendant repetition and inversion of lithostratigraphic units. The superficially steeper thrust plane seems to flatten out at depth. The MBT is tectonically and seismically very active at the present time.The Main Central Thrust (MCT), inclined 30° to 45° northwards, constitutes the real boundary between the Lesser and Great Himalaya. Marking an abrubt change in the style and orientation of structures and in the grade of metamorphism from lower amphibolitefacies of the Lesser Himalayan to higher metamorphic facies of the Great Himalayan, the redefined Main Central Thrust lies at a higher level as that originally recognized by A. Heim and A. Gansser. They had recognized this thrust as the contact of the mesozonal metamorphics against the underlying sedimentaries or epimetamorphics. It has now been redesignated as the Munsiari Thrust in Kumaun. It extends northwest in Himachal as the Jutogh Thrust and farther in Kashmir as the Panjal Thrust. In the eastern Himalaya the equivalents of the Munsiari Thrust are known as the Paro Thrust and the Bomdila Thrust. The upper thrust surface in Nepal is recognized as the Main Central Thrust by French and Japanese workers. The easterly extension of the MCT is known as the Khumbu Thrust in eastern Nepal, the Darjeeling Thrust in the Darjeeling-Sikkim region, the Thimpu Thrust in Bhutan and the Sela Thrust in western Arunachal. Significantly, hot springs occur in close proximity to this thrust in Kumaun, Nepal and Bhutan. There are reasons to believe that movement is taking place along the MCT, although seismically it is less active than the MBT.     

An overview of the metamorphic evolution in Central Nepal

This paper summarizes the studies of the metamorphic evolution of Central Nepal carried out by Nepali and international teams in the last 25 years. In Central Nepal, three metamorphic units are recognized. (1) The southernmost zone is the Lesser Himalaya, which is characterised by an inverted mineral zoning towards the Main Central Thrust (MCT) zone; (2) the Kathmandu nappe corresponds to an early (<22 Ma) out-of-sequence thrusting zone over the Lesser Himalaya along the Mahabharat thrust (MT) and is characterised by a Barrovian metamorphic evolution; (3) the Higher Himalayan Crystalline unit (HHC) is bounded at its base by the MCT and at its top by the South Tibetan Detachment system (STDS). It is characterised by successive tectonometamorphic episodes during the period spanning from 35–36 Ma to 2–3 Ma. Recent investigations suggest that the apparent metamorphic inversion througout the MCT zone does not reflect geothermal inversion. Instead, these investigations suggest successive cooling of the HHC along the MCT and the local preservation, above the MCT, of high-grade metamorphic rocks. The overall metamorphic history in Central Nepal from Oligocene to Pliocene, reflects the thermal reequilibration of rocks after thickening by conductive and advective heating and partial melting of the middle crust.     

POLYPHASE METAMORPHISM AND INVERTED THERMAL GRADIENT IN THE LESSER HIMALAYA OF CENTRAL NEPAL: CONSTRAINTS FROM WHITE MICA COMPOSITIONS

POLYPHASE METAMORPHISM AND INVERTED THERMAL GRADIENT IN THE LESSER HIMALAYA OF CENTRAL NEPAL: CONSTRAINTS FROM WHITE MICA COMPOSITIONS     

STRUCTURAL EVOLUTION OF THE KULU-RAMPUR AND LARJI WINDOW ZONES, WESTERN HIMALAYA, INDIA

STRUCTURAL EVOLUTION OF THE KULU-RAMPUR AND LARJI WINDOW ZONES, WESTERN HIMALAYA, INDIA     

Himalayan main central thrust and its implications for Himalayan inverted metamorphism

Within the scheme of south-directed orogenic polarity in the Himalayan region, the Main Central Thrust (MCT) developed at an intermediate stage between the collisional tectonics at the Indus-Tsangpo suture in the north and the latest underthrusting at the Main Boundary Thrust (MBT) in the south. The proposition that the MCT marks the base of the High Himalayan Central Crystalline zone against the Inner sedimentary belt of the Lower Himalayas creates confusion in its definition, and its location in Kashmir and especially in the Eastern Himalayas. The problem can be resolved by defining the MCT as the basal thrust of the crystalline nappe sequences either rooted at or detached as klippe from the Central Crystalline zone.Characteristically, the nappe sequences show inverted metamorphism which generally starts at the basal thrust, the redefined MCT, from the chlorite-biotite grades and reaches the kyanite-sillimanite grades with migmatites and anatectic granites in the highest tectonic levels. The metamorphic rank of both the substrate and the overthrust rock units in the vicinity of the MCT is generally low. The inverted metamorphism may be explained by intracontinental underthrusting and resultant downbowing of the isotherms. The redefined MCT does not appear to represent the thrust zone along which the continental underthrusting was initiated. It developed to the south of this zone as a possible sole thrust of the nappe stack of the crystalline rocks that overrode the parautochthonous sedimentary sequences of the Lower Himalayas.The sequence of events associated with the MCT would probably be repeated in the MBT.     

Tectonic and polymetamorphic history of the Lesser Himalaya in central Nepal

The Lesser Himalaya in central Nepal consists of Precambrian to early Paleozoic, low- to medium-grade metamorphic rocks of the Nawakot Complex, unconformably overlain by the Upper Carboniferous to Lower Miocene Tansen Group. It is divided tectonically into a Parautochthon, two thrust sheets (Thrust sheets I and II), and a wide shear zone (Main Central Thrust zone) from south to north by the Bari Gad–Kali Gandaki Fault, the Phalebas Thrust and the Lower Main Central Thrust, respectively. The Lesser Himalaya is overthrust by the Higher Himalaya along the Upper Main Central Thrust (UMCT). The Lesser Himalaya forms a foreland-propagating duplex structure, each tectonic unit being a horse bounded by imbricate faults. The UMCT and the Main Boundary Thrust are the roof and floor thrusts, respectively. The duplex is cut-off by an out-of-sequence fault. At least five phases of deformation (D₁–D₅) are recognized in the Lesser Himalaya, two of which (D₁ and D₂) belong to the pre-Himalayan (pre-Tertiary) orogeny. Petrographic, microprobe and illite crystallinity data show polymetamorphic evolution of the Lesser and Higher Himalayas in central Nepal. The Lesser Himalaya suffered a pre-Himalayan (probably early Paleozoic) anchizonal prograde metamorphism (M₀) and a Neohimalayan (syn- to post-UMCT) diagenetic to garnet grade prograde inverted metamorphism (M₂). The Higher Himalaya suffered an Eohimalayan (pre or early-UMCT) kyanite-grade prograde metamorphism (M₁) which was, in turn, overprinted by Neohimalayan (syn-UMCT) retrograde metamorphism (M₂). The isograd inversion from garnet zone in the Lesser Himalaya to kyanite zone in the Higher Himalaya is only apparent due to post-metamorphic thrusting along the UMCT. Both the Lesser and Higher Himalayas have undergone late-stage retrogression (M₃) during exhumation.     

THRUST PACKAGES OF 1.68 Ga INDIAN SUPRA-CRUSTAL ROCKS IN THE MIOCENE SIWALIK BELT,CENTRAL NEPAL HIMALAYAS

THRUST PACKAGES OF 1.68 Ga INDIAN SUPRA-CRUSTAL ROCKS IN THE MIOCENE SIWALIK BELT,CENTRAL NEPAL HIMALAYAS     

Structural set up in northern part of Kumaun Himalaya

The Main Central Thrust (MCT) and the Main Boundary Thrust (MBT) are the two major thrusts in Kumaun, the MCT forming the boundary between highly sheared, deformed and mylonitized rocks of the Great Himalayan Central Crystallines and the Lesser Himalayan metasedimentaries. While in the Central Crystallines four-folding episodes are observed of which two are of the Precambrian age, the Lesser Himalayan rocks show only two phases of folding. MCT has its own distinctive structural history and the crystalline mass comprises an integral part of peninsular India.     

Inverted metamorphism in the Pre-Siwalik foreland basin sediments beneath the crystalline nappe, western Nepal Himalaya

One of the Pre-Siwalik foreland basin sedimentary units, the Dumri Formation, is tectonically covered by the Lesser Himalayan Crystalline nappe and the Kuncha-Naudanda thrust sheet. It is narrowly distributed in the eastern margin of the Karnali klippe along the NNE–SSW trending Chakure Fault. The whole sequence of the fluvial Dumri Formation attaining 1500 m in thickness is weakly metamorphosed to muscovite phyllite and foliated phyllitic sandstone. The metamorphic grade decreases stratigraphically downward and underlying Nummulitic limestone of the middle Eocene Bhainskati Formation is converted into a slaty limestone. No metamorphic mica is detected from the late Cretaceous to Paleocene Amile Formation below the Bhainskati Formation. These facts indicate that the Tansen Group has undergone inverted metamorphism.A ⁴⁰Ar/³⁹Ar plateau age of 25.69±0.13 Ma was obtained from garnetiferous biotite gneiss in the lower part of the crystalline nappe. Another ⁴⁰Ar/³⁹Ar age spectrum from muscovite phyllite of the Dumri Formation suggests that metamorphism occurred at 16–17 Ma. The origin of the inverted metamorphism limited to the uppermost part of the Lesser Himalayan autochthon can be attributed to heat from the hot crystalline nappe and shearing along the sole thrust of the Kuncha-Naudanda thrust sheet. The depositional age of the Dumri Formation is estimated to be 26–17 Ma.Provenance of the Dumri Formation is considered to be from the Naudanda Quartzite, the Kuncha Formation and the Tibetan Tethys sediments, because the sandstone contains orthoquartzite pebbles, phyllitic lithic fragments and a sparry calcite cement. The sedimentary facies indicates deposition by meandering rivers on flood-plains in the distal part of the foreland basin. No proximal facies, such as alluvial fan and pebbly braided river deposits, could be detected from the formation, though it is near the Main Central Thrust (MCT). The northern continuation of the foreland basin sediments must be concealed beneath the Higher Himalayan Crystalline. Judging from the present distribution of the Dumri Formation from the south of the Main Boundary Thrust (MBT) to near the MCT and from the shortening of the Lesser Himalayan sediments by thrusts and folds, the width of the foreland basin where the Dumri Formation was deposited is estimated to have been more than 300 km.     

Late Miocene movement within the Himalayan Main Central Thrust shear zone, Sikkim, north-east India

In the Sikkim region of north‐east India, the Main Central Thrust (MCT) juxtaposes high‐grade gneisses of the Greater Himalayan Crystallines over lower‐grade slates, phyllites and schists of the Lesser Himalaya Formation. Inverted metamorphism characterizes rocks that immediately underlie the thrust, and the large‐scale South Tibet Detachment System (STDS) bounds the northern side of the Greater Himalayan Crystallines. In situ Th–Pb monazite ages indicate that the MCT shear zone in the Sikkim region was active at c. 22, 14–15 and 12–10 Ma, whereas zircon and monazite ages from a slightly deformed horizon of a High Himalayan leucogranite within the STDS suggest normal slip activity at c. 17 and 14–15 Ma. Although average monazite ages decrease towards structurally lower levels of the MCT shear zone, individual results do not follow a progressive younging pattern. Lesser Himalaya sample KBP1062A records monazite crystallization from 11.5 ± 0.2 to 12.2 ± 0.1 Ma and peak conditions of 610 ± 25 °C and 7.5 ± 0.5 kbar, whereas, in the MCT shear zone rock CHG14103, monazite crystallized from 13.8 ± 0.5 to 11.9 ± 0.3 Ma at lower grade conditions of 525 ± 25 °C and 6 ± 1 kbar. The P–T–t results indicate that the shear zone experienced a complicated slip history, and have implications for the understanding of mid‐crustal extrusion and the role of out‐of‐sequence thrusts in convergent plate tectonic settings.     

Causes of large-scale landslides in the Lesser Himalaya of central Nepal

Geologically and tectonically active Himalayan Range is characterized by highly elevated mountains and deep river valleys. Because of steep mountain slopes, and dynamic geological conditions, large-scale landslides are very common in Lesser and Higher Himalayan zones of Nepal Himalaya. Slopes along the major highways of central Nepal namely Prithvi Highway, Narayangadh-Mugling Road and Tribhuvan Highway are considered in this study of large-scale landslides. Geologically, the highways in consideration pass through crushed and jointed Kathmandu Nappe affected by numerous faults and folds. The relict large-scale landslides have been contributing to debris flows and slides along the highways. Most of the slope failures are mainly bechanced in geological formations consisting phyllite, schist and gneiss. Laboratory test on the soil samples collected from the failure zones and field investigation suggested significant hydrothermal alteration in the area. The substantial hydrothermal alteration in the Lesser Himalaya during advancement of the Main Central Thrust (MCT) and thereby clay mineralization in sliding zones of large-scale landslide are the main causes of large-scale landslides in the highways of central Nepal. This research also suggests that large-scale landslides are the major cause of slope failure during monsoon in the Lesser Himalaya of Nepal. Similarly, hydrothermal alteration is also significant in failure zone of the large-scale landslides. For the sustainable road maintenance in Nepal, it is of utmost importance to study the nature of sliding zones of large-scale landslides along the highways and their role to cause debris flows and slides during monsoon period.     

GEOLOGY OF THE TAPLEJUNG WINDOW AND FRONTAL BELT, FAR EASTERN NEPAL HIMALAYA

GEOLOGY OF THE TAPLEJUNG WINDOW AND FRONTAL BELT, FAR EASTERN NEPAL HIMALAYA1　PecherA .Deformationandmetamorphismeassociesaunezonedecisaillement :Exampledugrandchevauchementcen tralHimalayan (MCT) [M ].Thesed’Etat,UnivGrenoble ,France ,1978.35 4. 2　RaiSM .LesnappesdeKathmandudtduGosainkund ,HimalayaduNepalcentral[M ].Thesededoctoral,Univ .Grenoble ,France ,1998.2 44 . 3　SchellingD ,AritaK .Thrusttectonics ,crustalshortening ,andthestructureofthe…     

The Siwaliks of western Nepal: I. Geometry and kinematics

The Siwalik Group which forms the southern zone of the Himalayan orogen, constitutes the deformed part of the Neogene foreland basin situated above the downflexed Indian lithosphere. It forms the outer part of the thin-skinned thrust belt of the Himalaya, a belt where the faults branch off a major décollement (MD) that is the external part of the basal detachment of Himalayan thrust belt. This décollement is located beneath 13 Ma sediments in far-western Nepal, and beneath 14.6 Ma sediments in mid-western Nepal, i.e., above the base of the Siwalik Group. Unconformities have been observed in the upper Siwalik member of western Nepal both on satellite images and in the field, and suggest that tectonics has affected the frontal part of the outer belt since more than 1.8 Ma. Several north dipping thrusts delineate tectonic boundaries in the Siwalik Group of western Nepal. The Main Dun Thrust (MDT) is formed by a succession of 4 laterally relayed thrusts, and the Main Frontal Thrust (MFT) is formed by three segments that die out laterally in propagating folds or branch and relay faults along lateral transfer zones. One of the major transfer zones is the West Dang Transfer Zone (WDTZ), which has a north-northeast strike and is formed by strike-slip faults, sigmoid folds and sigmoid reverse faults. The width of the outer belt of the Himalaya varies from 25 km west of the WDTZ to 40 km east of the WDTZ. The WDTZ is probably related to an underlying fault that induces: (a) a change of the stratigraphic thickness of the Siwalik members involved in the thin-skinned thrust belt, and particularly of the middle Siwalik member; (b) an increase, from west to east, of the depth of the décollement level; and (c) a lateral ramp that transfers displacement from one thrust to another. Large wedge-top basins (Duns) of western Nepal have developed east of the WDTZ. The superposition of two décollement levels in the lower Siwalik member is clear in a large portion of the Siwalik group of western Nepal where it induces duplexes development. The duplexes are formed either by far-travelled horses that crop out at the hangingwall of the Internal Décollement Thrust (ID) to the south of the Main Boundary Thrust, or by horses that remain hidden below the middle Siwaliks or Lesser Himalayan rocks. Most of the thrusts sheets of the outer belt of western Nepal have moved toward the S–SW and balanced cross-sections show at least 40 km shortening through the outer belt. This value probably under-estimates the shortening because erosion has removed the hangingwall cut-off of the Siwalik series. The mean shortening rate has been 17 mm/yr in the outer belt for the last 2.3 Ma.     

Deformation style in the Munsiari Thrust Zone: a study in the Madlakia–Munsiari–Dhapa section in north-eastern Kumaun Himalaya

The Main Central Thrust demarcates the boundary between the Lesser Himalaya and the Higher Himalaya in the Himalayan orogen. Several definitions of the Main Central Thrust have been proposed since it was originally described as the southern boundary of the crystalline rocks (the Main Central Thrust mass) in the Kumaun-Garhwal Himalaya. The long-held contention that the Munsiari Thrust represents the Main Central Thrust has been negated by recent isotopic studies. One way to define the Main Central Thrust is that it is a ductile shear zone that is delimited by the Munsiari Thrust (MCT-I) in south and the Vaikrita Thrust (MCT-II) in north. The alternative proposition that the Vaikrita Thrust represents the Main Central Thrust is fraught with practical limitations in many parts of the Himalaya, including the study area. In the metamorphic rocks bounded between the Vaikrita Thrust and the Munsiari Thrust, the isoclinal folds of the earliest phase are routinely ascribed to the pre-Himalayan orogeny, whereas all subsequent folding phases are attributed to the Himalayan orogeny. This article elucidates the structural characteristics of the kilometre-thick Munsiari Thrust Zone and revisits the issue of pre-Himalayan orogenic signatures in the thrust zone. With the help of high-resolution field mapping and the analyses of mesoscopic scale structures, we demonstrate that the Munsiari Thrust is a typical fault zone that is made up of a fault core and two damage zones. The fault core traces the boundary between the quartzite and the biotite-gneiss. The damage zones consist of the low-grade metasedimentary rocks in the footwall and the gneiss-migmatite in the hanging wall. The entire fault zone shares an essentially common history of progressive ductile shearing. Successively developed mesoscopic folds trace various stages of progressive ductile shearing in the damage zones. Two recognizable stages of the shearing are represented by the early isoclinal folds and the late kink folds. As the strain during progressive deformation achieved the levels that were too high for accommodation by ductile flow, it was released by development of a tectonic dislocation along a mechanically weak boundary, the Munsiari Thrust. The isoclinal folds and the Munsiari Thrust were developed at different stages of a common progressive deformation during the Himalayan orogeny. Contrary to the popular notion of consistency with respect to orientation, the stretching lineations show large directional variability due to distortion during the late folding.     

Structural analyses of the crystalline rocks between Dirang and Tawang,West Kameng district,Arunachal Himalaya

In Kameng Valley of Arunachal Pradesh, the crystalline rocks of Se La Group of Higher Himalaya are thrust over the Lesser Himalayan rocks of Dirang Formation, Bomdila Group along the Main Central Thrust and exhibit well preserved structures on macro- to microscopic scales. Detailed analysis of structures reveals that the rocks of the area have suffered four phases of deformation D₁, D₂, D₃ and D₄. These structures have been grouped into (i) early structures (ii) structures related to progressive ductile thrusting and (iii) late structures. The early structures which developed before thrusting formed during D₁ and D₂ phases of deformation, synchronous to F₁ and F₂ phases of folding respectively. The structures related to progressive ductile shearing developed during D₃ phase of deformation, when the emplacement of the crystalline rocks took place over the rocks of Dirang Formation along the Main Central Thrust. Different asymmetric structures/kinematic indicators developed during this ductile/brittle-ductile regime suggest top-to-SSW sense of movement of the crystalline rocks of the area. D₄ is attributed to brittle deformation. Based on satellite data two new thrusts, i.e. Tawang and Se La thrusts have been identified parallel to Main Central Thrust, which are suggestive of imbricate thrusting. Strain analysis from the quartz grains of the gneissic rocks reveals constriction type of strain ellipsoid where k value is higher near the MCT, gradually decreases towards the north. Further, the dynamic analysis carried out on the mesoscopic ductile and brittle-ductile shear zones suggest a NNE-SSW horizontal compression corresponding to the direction of northward movement of Indian Plate.     

Crustal architecture of the Himalayan metamorphic front in eastern Nepal

The Himalayan Metamorphic Front consists of two basinal sequences deposited on the Indian passive margin, the Mesoproterozoic Lesser Himalayan Sequence and the Neoproterozoic–Cambrian Greater Himalayan Sequence. The current paradigm is that the unconformity between these two basinal sequences coincides with a crustal-scale thrust that has been called the Main Central Thrust, and that this acted as the fundamental structure that controlled the architecture of the Himalayan Metamorphic Front. Geological mapping of eastern Nepal and eight detailed stratigraphic, kinematic, strain and metamorphic profiles through the Himalayan Metamorphic Front define the crustal architecture. In eastern Nepal the unconformity does not coincide with a discrete structural or metamorphic discontinuity and is not a discrete high strain zone. In recognition of this, we introduce the term Himalayan Unconformity to distinguish it from high strain zones in the Himalayan Metamorphic Front. The fundamental structure that controls orogen architecture in eastern Nepal occurs at higher structural levels within the Greater Himalayan Sequence and we suggest the name; High Himal Thrust. This 100–400 m thick mylonite zone marks a sharp deformation discontinuity associated with a steep metamorphic transition, and separates the Upper-Plate from the Lower-Plate in the Himalayan Metamorphic Front. The high-T/moderate-P metamorphism at  20–24 Ma in the Upper-Plate reflects extrusion of material between the High Himal Thrust and the South Tibet Detachment System at the top of the section. The Lower-Plate is a broad schistose zone of inverted, diachronous moderate-T/high-P metamorphic rocks formed between  18 and 6 Ma. The High Himal Thrust is laterally continuous into Sikkim and Bhutan where it also occurs at higher structural levels than the Himalayan Unconformity and Main Central Thrust (as originally defined). To the west in central Nepal, the Upper-Plate/Lower-Plate boundary has been placed at lower structural levels, coinciding with the Himalayan Unconformity and has been named the Main Central Thrust, above the originally defined Main Central Thrust (or Ramgarh Thrust).