A Global Refiability Assessment Method on Aging Offshore Platforms with Corrosion and Cracks

Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms.For the rational estimation of the safety levels of aging platforms,a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper.The base shear capacity is taken as the global ultimate strength of the offshore plaffoms,it is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagation.And the corrosion and fatigue crack growth rates in the main members and key joints are modeled as random variables.A simulation method of the extreme wave loads which are applied to the structures of offshore platforms is proposed too.Furthermore,the statistics of global base shear capacity and extreme wave loads are obtained by Monte Carlo simulation method.On the basis of the limit state equation of global failure mode,the instantaneous reliability and time dependent reliability assessment methods are both presented in this paper.Finally the instantaueous reliability index and time dependent failure probability of a jacket platform are estimated with different ages in the demonstration example.     

南海某导管架海洋平台倒塌分析

针对在役老龄导管架平台进行倒塌计算分析,确定极限承载力进而评估老龄导管架的安全裕度。采用非线性有限元方法,考虑平台的波流载荷及桩-土的非线性相互作用,利用SACS软件建立导管架整体三维有限元计算分析模型,并用逐步加载的方式,对南海某导管架平台进行了全过程非线性倒塌分析。计算分析表明,该导管架平台极限强度很高,具有较大的安全裕度;导管架倒塌过程呈逐步破坏形式,先是撑杆屈服,造成局部结构破坏,然后是钢桩发生屈服,降低结构承载力,最后节点逐步失效,造成结构倒塌。揭示了导管架平台结构失效倒塌的机理,给出了倒塌分析的可行方法和步骤。     

海洋导管架平台的极限强度分析

海洋导管架平台的极限分析是一项较新的研究课题，随着海上采油事业的飞速发展，它已越来越受到海洋工程设计及维修部门的重视。其研究成果不仅能用于设计结构的应力校核，尚可用于现有平台结构的整体安全估算。本文利用非线性模拟技术及线性分析程序的完美结合。成功地分析计算了受集中哉茶作用的空间框架结构，及受静载荷和环境载荷作用下的真实导管架平台极限强度。     

Ultimate Strength Analysis of Offshore Jacket Platform

- The ultimate strength analysis of offshore jacket platforms is a research project which has been developed in recent years. With the rapid development of marine oil industry, the departments of design and IMR (Inspection, Maintenance and Repair) in the offshore engineering have attached great importance to this project. The research procedure applies to both the stress check of new design platforms and the whole safety assessment of existing platforms. In this paper, we combine the pseudo non-linear technique with the linear analysis program and successfully analyze the ultimate strength of the space frame structure subject to the concentrated load and a real jacket platform subject to the dead load and environmental load.     

A Global Reliability Assessment Method on Aging Offshore Platforms with Corrosion and Cracks

Corrosion and fatigue cracks are major threats to the structural integrity of aging offshore platforms. For the rational estimation of the safety levels of aging platforms, a global reliability assessment approach for aging offshore platforms with corrosion and fatigue cracks is presented in this paper. The base shear capacity is taken as the global ultimate strength of the offshore platforms. It is modeled as a random process that decreases with time in the presence of corrosion and fatigue crack propagati...     

极端荷载作用下海洋导管架平台体系可靠度分析

采用非线性倒塌分析方法，考虑桩－土－结构的非线性相互作用，研究了导管架平台在极端荷载作用下承载能力的计算模型，分析了平台结构体系在极端荷载作用下的全倒塌全过程，在此基础上，结合蒙特卡洛法，提出了海洋导管架平台结构的体系可靠度计算方法。最后对工程实例－涠11－4C海洋平台的结构进行了体系可靠性分析，并对比分析了不同的荷载效应计算公式对计算经的影响，研究表明计算经满足工程设计要求，便于工程应用。     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.     

Optimum design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints

Economy and ice-resistance are two factors that must be considered in the design of offshore oil platforms in the Bohai Gulf. This paper focuses on the optimal design of ice-resistant offshore jacket platforms in the Bohai Gulf in consideration of fatigue life of tubular joints, with the minimum initial weight and satisfying dynamic properties. An efficient fatigue analysis procedure based on spectral analysis is proposed, in which a hybrid finite element model is adopted to simulate the jacket platform and the tubular joints, and the pseudo-excitation method is used to calculate the power spectral density of the hot spot stress. Finally, a practical jacket platform with an ice-breaking cone in the Bohai Gulf is optimized, and the results demonstrate that the fatigue life of tubular joints could be improved and the weight of jackets decreased simultaneously.     

Reliability Analysis for Offshore Platform Structural Systems

A system reliability estimation method for spatial jacket platforms is developed in this paper,The jacket platform is modeled into three-dimensional assembly of spatial beam and plate elements in Fi-nite Element Method(FEM).The limit failure states correspond to collapse of a series of structural mem-bers which are identified by engineering design criteria.In this paper the following aspects are taken intoaccount:the punching shear and buckiing failures in member failure modes for the tubular joints and tubu-lar columns respectively;incremental loading approach for establishment of the safety margin equations ofsystem failure;the algorithm of enumerating significant failure modes for the structural systems and otherconcepts,such as the false failure mode and the virtual limit state.The final work is devoted to the reliabili-ty analysis for a practical jacket platform presently put into operation on the Bohai Sea.The computed re-sults shows that method suggested in this paper is feasible and effective for     

单点系泊海洋导管架平台结构体系可靠性分析

采用非线性逐步倒塌分析方法,考虑桩-土-结构的非线性相互作用,研究了单点系泊海洋导管架平台在极端荷载作用下的承载能力计算模型,在此基础上结合蒙特卡洛随机抽样法,提出了单点系泊海洋导管架平台结构体系可靠度计算方法。最后对工程实例BZ28-1SPM单点系?白海洋导管架平台结构在20年设计基准期和50年重现期进行了体系可靠性分析：研究结果表明：用50年重现期的环境荷载参数来进行BZ28-1SPM单点系泊海洋导管架平台结构的设计是合理的;在环境荷载中起主导作用的是由波浪引起的系泊力;在海洋平台结构的设计及对已服役平台结构的评估中运用体系可靠度理论,可以为海洋平台结构的设计、维护和评估提供理论依据。     

南海A平台导管架阴极保护监测结果讨论与分析

通过对南海A平台导管架阴极保护监测结果的分析,研究了该平台下水一年后导管架的阴极保护状态。结果表明,该平台下水后,导管架各节点电位及牺牲阳极电位均达到保护,阴极保护状态良好。阴极保护监测系统运行稳定,双电极探头未发现损坏,所得监测结果翔实可靠,对该海域新建平台导管架监测系统有着重要的借鉴价值。     

Optimum Design of Structure Shape for Offshore Jacket Platforms

With the introduction of the design variables of nodal coordinates,which reflect the em-bedded depth of the pile and the jacket bed height,a shape optimum design model for offshore jacket plat-forms is established.A sequential two-level optimum algorithm is developed based on the design variablegradation.On the basis of the finite element method,the sensitivity of the objective function and nodal dis-placement is analyzed.As an example,the BZ281 oil storage offshore platform,which lies in the Bohai oilfield,is designed with the shape optimum model.The results are compared with the cross-section optimumdesign.The tendency of design variables and its reasons in the two methods are analyzed.In the shapeoptimum design,the value of objective function is obviously smaller than that of the initial design and thecross-section optimum design.Therefore,the advantage of structure shape optimum design for jacket plat-forms is remarkable.     

局部随机点蚀下圆管截面极限强度退化规律

针对构件外表面局部区域遭受随机点蚀损伤的圆管截面,考虑点蚀随机特性的影响,建立包含点蚀坑细节的精细有限元模型;在多种腐蚀强度下,研究局部腐蚀的点蚀区分布位置(沿轴向和周向分布位置变化)及其形状(点蚀区长度和宽度独立或联合变化)影响轴压极限强度退化的规律;并比较局部随机点蚀与局部均匀腐蚀引起构件极限强度退化的差异。研究结果表明,尽管局部随机点蚀与最大初始几何缺陷的耦合作用会使极限强度的退化趋于严重,但是总体而言点蚀区分布位置变化对圆管极限强度的退化没有显著的影响。此外,同等腐蚀体积和腐蚀面积下,相比于长窄式局部腐蚀,短宽式局部腐蚀会引起更严重的极限强度退化,在严重腐蚀情形下后者导致的强度退化会高出25.5%;相比于局部均匀腐蚀,局部随机点蚀会导致更剧烈的极限强度退化,其不利影响可高出20.7%。     

加筋板的轴压强度受加筋随机点蚀的影响研究

船舶与海洋结构在服役期间会遭受电化学和微生物侵蚀等多种腐蚀环境影响,加筋板作为此类结构的主要受力构件,其表面易产生不规则形态的点蚀,引起构件的强度退化。利用ANSYS有限元软件构建加筋腹板遭受随机点蚀损伤的加筋板有限元模型,研究带板长宽比、带板长细比、加筋长细比和腐蚀体积损失率对加筋板极限强度的影响。研究结果表明,加筋遭受同等腐蚀体积损失率下,带板长宽比变化对极限强度退化的影响很小,但带板长细比和加筋长细比变化产生的影响明显;带板长细比越大,极限强度退化越严重,而加筋长细比越大,极限强度退化反而越小。针对文中研究的加筋板,当加筋长细比为 0.2时,腐蚀体积率为14%的随机点蚀导致结构极限强度退化程度达到约14.0%。因此,加筋的随机点蚀损伤会显著削弱加筋板结构的极限强度,其影响不可忽略。     

Passive control of offshore jacket platforms

The wave-induced dynamic force is one of the most important excitations to be dealt with in the design of offshore structures. In order to perform a reliable design of an offshore structure, it is important to obtain an exact evaluation of its dynamic response but also to examine the ways of reducing the response. This paper presents the response of offshore jacket platforms installed with energy dissipation devices such as viscoelastic, viscous and friction dampers under wave loading. The offshore jacket platforms are modeled as multi-degrees-of-freedom system provided with dampers at each floor location. The wave forces are modeled as per Morison's equation. The governing equations of motion of the jacket platform with dampers are derived and their solution in the frequency domain is presented. The uni-directional random wave loading is expressed by the Pierson-Muskowitz spectrum. The response of the jacket platform with viscoelastic, viscous and friction dampers is compared with the corresponding response without dampers in order to investigate the effectiveness of the passive control systems. It is observed that the additional dampers add substantial damping to structure and thus favorably control the response of platform structure. Among the various energy dissipation devices used for study, the viscoelastic dampers perform better in comparison to the other dampers. This is due to the fact that the added viscoelastic dampers contribute to increased viscous damping as well as lateral stiffness which reduces the response of the offshore jacket platforms significantly.     

海洋平台现场动态应力测试

迄今为至胜利浅海油田已相继建成大小平台几十座,平台结构型式是导管架式,志管架平台的结构计算理论已基本成熟,现场应力测试是对平台结构设计的验证、补充和发展,但是有关平台的现场应力测试在海洋工程界则是一个空白。本文主要介绍埕北２５Ａ井组平台现场应力测试的方法、结果以及与理论计算的对比。     

固定式海洋平台极限强度试验研究

根据墨西哥湾某海域一典型固定式海洋平台为原型,按照几何相似准则和刚度相似准则设计并制作海洋平台试验模型,开展极限强度模型试验研究,观察并记录其破坏过程。并采用非线性有限元方法(ANSYS)对试验模型进行极限强度数值计算,将计算结果与试验结果对比,结果表明计算结果与试验结果吻合较好,验证非线性有限元方法的有效性。     

On the energy dissipation of jacket type offshore platforms with different pile–leg interactions

In recent years, considerable amount of effort has been made to design earthquake resistant offshore structures in seismic active areas. In order to achieve this objective, all components of a typical structure should function properly to dissipate seismically-induced energy within the members. Among components of an offshore installation, braces are of significant importance as they contribute substantially to total energy dissipation of the structure. Buckling in compression and yielding in tension assist the process of energy absorption. Nevertheless, the functionality of braces is dependent upon their joints where joint-cans are included to avoid any brittle fracture and unpredicted failure mechanisms.In this paper, special attention is being paid to energy dissipation of jacket type offshore platforms with two different pile–leg interactions. A case study representing an offshore platform is studied both analytically and experimentally. Analytical models are validated step by step based on available experimental tests and observations on individual members. Several parameters such as cyclic behavior, maximum bearing load and most importantly energy dissipation of two different 2D frames are investigated. Results provide promising insights into design and fabrication of fixed platforms with different pile–leg interactions.     

Wave-induced vibration control of offshore jacket platforms through SMA dampers

Since permanent wave-induced vibrations of offshore jacket platforms reduce the service life of the jacket structure and deck equipment and increase the fatigue failure of the welded connections, this research has used SMA (shape memory alloy) dampers to control the jacket platform oscillations. Superelasticity, high durability, and energy dissipation capability make SMA elements good nominees for the design of vibration control devices. In this research, to model the force-displacement hysteretic behavior of SMA elements their idealized multi-linear constitutive model has been implemented and the time history responses of vibration equations have been evaluated by direct integration method. To analyze the SMA damper effects on the vibration suppression of the jacket platforms, a 90 (m) high jacket located 80 (m) deep in water has been selected as a case study. Numerical results have shown that optimized SMA dampers with constant-geometry SMA bars will improve the dynamic behavior of the jacket platform under the action of an extreme regular wave. However, under the action of two irregular waves, SMA dampers with varying-geometry SMA bars will cause significant reduction in the dynamic responses of the jacket platform. The power spectral density function of the deck displacements have shown that the previously mentioned SMA dampers avoid resonance by shifting the natural frequencies of the jacket structure away from the excitation frequencies.