Transport of gold and silver in oxygen‐saturated fluids and the formation of high‐fineness gold in saprolitic supergene environments

This paper presents the results of thermodynamic calculations on the solubility of gold and silver in low‐temperature, moderately saline, oxygen‐saturated fluids. Based on the solubilities of gold and silver it is argued that the quantity of gold transported by the fluids depends on the concentration of silver in the primary ores. In ores where the silver/gold ratio is high (1 to > 10), the fluids become saturated in silver and can not dissolve geologically significant concentrations of gold. In ores where the silver/gold ratio is low (< 1), the fluids remain undersaturated with respect to silver and are able to dissolve geologically realistic concentrations of gold and silver. The oxidized fluids start depositing gold and silver as they move downwards and are reduced by the Fe⁺²‐bearing minerals of the primary ores. The occurrence of gold in lateritic profiles can be explained by a prolonged process of interaction between the fluid and primary ores, during which gold and silver precipitate and redissolve selectively at the gradually advancing oxidation‐reduction interface.     

Formation of gold–silver sulfides and native gold in Fe–Ag–Au–S system

We carried out experiments on crystallization of Fe-containing melts FeS₂Ag_0.1–0.1xAu_0.1x (x = 0.05, 0.2, 0.4, and 0.8) with Ag/Au weight ratios from 10 to 0.1. Mixtures prepared from elements in corresponding proportions were heated in evacuated quartz ampoules to 1050 ºC and kept at this temperature for 12 h; then they were cooled to 150 ºC, annealed for 30 days, and cooled to room temperature. The solid-phase products were studied by optical and electron microscopy and X-ray spectroscopy. The crystallization products were mainly from iron sulfides: monoclinic pyrrhotite (Fe_0.47S_0.53 or Fe₇S₈) and pyrite (Fe_0.99S_2.01). Gold–silver sulfides (low-temperature modifications) are present in all synthesized samples. Depending on Ag/Au, the following sulfides are produced: acanthite (Ag/Au = 10), solid solutions Ag_2–xAu_xS (Ag/Au = 10, 2), uytenbogaardtite (Ag/Au = 2, 0.75), and petrovskaite (Ag/Au = 0.75, 0.12). They contain iron impurities (up to 3.3 wt.%). Xenomorphic micro- (<1–5 μm) and macrograins (5–50 μm) of Au–Ag sulfides are localized in pyrite or between the grains of pyrite and pyrrhotite. High-fineness gold was detected in the samples with initial ratio Ag/Au ≤ 2. It is present as fine and large rounded microinclusions or as intergrowths with Au–Ag sulfides in pyrite or, more seldom, at the boundary of pyrite and pyrrhotite grains. This gold contains up to 5.7 wt.% Fe. Based on the sample textures and phase relations, a sequence of their crystallization was determined. At ~1050 ºC, there are probably iron sulfide melt L₁ (Fe,S ? Ag,Au), gold–silver sulfide melt L₂ (Au,Ag,S ? Fe), and liquid sulfur L_S. On cooling, melt L₁ produces pyrrhotite; further cooling leads to the crystallization of high-fineness gold (macrograins from L₁ and micrograins from L₂) and Au–Ag sulfides (micrograins from L₁ and macrograins from L₂). Pyrite crystallizes after gold–silver sulfides by the peritectic reaction FeS + L_S = FeS₂ at ~743 ºC. Elemental sulfur is the last to crystallize. Gold–silver sulfides are stable and dominate over native gold and silver, especially in pyrite-containing ores with high Ag/Au ratios.     

Geochemical characteristics of pyrite in Duolanasayi gold deposit, Xinjiang

The Duolanasayi gold deposit, 60 km NW of Habahe County, Xinjiang Uygur Autonomous Region, is a mid-large-scale gold deposit controlled by brittle-ductile shearing, and superimposed by albitite veins and late-stage magma hydrothermal solutions. There are four types of pyrite, which are contained in the light metamorphosed rocks (limestone, siltstone), altered-mineralized rocks (chlorite-schist, altered albite-granite, mineralized phyllite), quartz veins and carbonatite veinlets. The pyrite is the most common ore mineral. The Au-barren pyrite is present mainly in a simple form and gold-bearing pyrite is present mainly in a composite form. From the top downwards, the pyrite varies in crystal form from {100} and {210} {100} to {210} {100} {111} to {100} {111}. Geochemical studies indicate that the molecular contents of pyrite range from Fe1.057S2 to Fe0.941S2. Gold positively correlates with Mn, Sr, Zn, Te, Pb, Ba and Ag. There are four groups of trace elements: Fe-Cu-Sr-Ag, Au-Te-Co, As-Pb-Zn and Mn-V-Ti-Ba-Ni-Cr in pyrite. The REE characteristics show that the total amount of REE (ΣREE) ranges from 32.35×10 -6 to 132.18×10 -6; LREE/HREE, 4.466-9.142; (La/Yb)N, 3.719-11.133; (Eu/Sm)N, 0.553-1.656; (Sm/Nd)N, 0.602-0.717; La/Yb, 6.26-18.75; δEu, 0.628-2.309; δCe, 0.308-0.816. Sulfur isotopic compositions (δ 34S=-2.46‰--7.02‰) suggest that the sulfur associated with gold mineralization was derived from the upper mantle or lower crust.     

Lode–gold mineralization in the Tanami region, northern Australia

The Tanami region of northern Australia has emerged over the last two decades as the largest gold-producing region in the Northern Territory. Gold is hosted by epigenetic quartz veins in sedimentary and mafic rocks, and by sulfide-rich replacement zones within iron formation. Although limited, geochronological data suggest that most mineralization occurred at about 1,805–1,790 Ma, during a period of extensive granite intrusion, although structural relationships suggest that some deposits predate this period. There are three main goldfields in the Tanami region: the Dead Bullock Soak goldfield, which hosts the world-class Callie deposit; The Granites goldfield; and the Tanami goldfield. In the Dead Bullock Soak goldfield, deposits are hosted by carbonaceous siltstone and iron formation where a late (D₅) structural corridor intersects an early F₁ anticlinorium. In The Granites goldfield, deposits are hosted by highly sheared iron formation and are interpreted to predate D₅. The Tanami goldfield consists of a large number of small, mostly basalt-hosted deposits that probably formed at a high structural level during D₅. The D₅ structures that host most deposits formed in a convergent structural regime with σ ₁ oriented between E–W and ENE–WSW. Structures active during D₅ include NE-trending oblique thrust (dextral) faults and ESE-trending (sinistral) faults that curve into N- to NNW-trending reverse faults localized in supracrustal belts between and around granite complexes. Granite intrusions also locally perturbed the stress field, possibly localizing structures and deposits. Forward modeling and preliminary interpretations of reflection seismic data indicate that all faults extend into the mid-crust. In areas characterized by the N- to NW-trending faults, orebodies also tend to be N- to NW-trending, localized in dilational jogs or in fractured, competent rock units. In areas characterized by ESE-trending faults, the orebodies and veins tend to strike broadly east at an angle consistent with tensional fractures opened during E–W- to ENE–WSW-directed transpression. Many of these deposits are hosted by reactive rock units such as carbonaceous siltstone and iron formation. Ore deposition occurred at depths ranging from 1.5 to 11 km from generally low to moderate salinity carbonic fluids with temperatures from 200 to 430°C, similar to lode–gold fluids elsewhere in the world. These fluids are interpreted as the product of metamorphic dewatering caused by enhanced heat flow, although it is also possible that the fluids were derived from coeval granites. Lead isotope data suggest that lead in the ore fluids had multiple sources. Hydrogen and oxygen isotope data are consistent with both metamorphic and magmatic origins for ore fluids. Gold deposition is interpreted to be caused by fluid unmixing and sulfidation of host rocks. Fluid unmixing is caused by three different processes: (1) CO₂ unmixing caused by interaction of ore fluids with carbonaceous siltstone; (2) depressurization caused by pressure cycling in shear zones; and (3) boiling as ore fluids move to shallow levels. Deposits in the Tanami region may illustrate the continuum model of lode–gold deposition suggested by Groves (Mineralium Deposita 28:366–374, 1993) for Archean districts.     

Processes of high-T fluid–rock interaction during gold mineralization in carbonate-bearing metasediments: the Navachab gold deposit,Namibia

The Navachab gold deposit in the Damara belt of central Namibia is hosted by a near-vertical sequence of amphibolite facies shelf-type metasediments, including marble, calc-silicate rock, and biotite schist. Petrologic and geochemical data were collected in the ore, alteration halos, and the wall rock to evaluate transport of elements and interaction between the wall rock and the mineralizing fluid. The semi-massive sulfide lenses and quartz–sulfide veins are characterized by a complex polymetallic ore assemblage, comprising pyrrhotite, chalcopyrite, sphalerite, and arsenopyrite, native bismuth, gold, bismuthinite, and bismuth tellurides. Mass balance calculations indicate the addition of up to several orders of magnitude of Au, Bi, As, Ag, and Cu. The mineralized zones also record up to eightfold higher Mn and Fe concentrations. The semi-massive sulfide lenses are situated in the banded calc-silicate rock. Petrologic and textural data indicate that they represent hydraulic breccias that contain up to 50 vol.% ore minerals, and that are dominated by a high-temperature (T) alteration assemblage of garnet–clinopyroxene–K-feldspar–quartz. The quartz–sulfide veins crosscut all lithological units. Their thickness and mineralogy is strongly controlled by the composition and rheological behavior of the wall rocks. In the biotite schist and calc-silicate rock, they are up to several decimeters thick and quartz-rich, whereas in the marble, the same veins are only a few millimeters thick and dominated by sulfides. The associated alteration halos comprise (1) an actinolite–quartz alteration in the biotite schist, (2) a garnet–clinopyroxene–K-feldspar–quartz alteration in the marble and calc-silicate rock, and (3) a garnet–biotite alteration that is recorded in all rock types except the marble. The hydrothermal overprint was associated with large-scale carbonate dissolution and a dramatic increase in CO₂ in the ore fluid. Decarbonation of wall rocks, as well as a low REE content of the ore fluid resulted in the mobilization of the REE, and the decoupling of the LREE from the HREE. The alteration halos not only parallel the mineralized zones, but may also follow up single layers away from the mineralization. Alteration is far more pronounced facing upward, indicating that the rocks were steep when veining occurred. The petrologic and geochemical data indicate that the actinolite–quartz– and garnet–clinopyroxene–K-feldspar–quartz alterations formed in equilibrium with a fluid (super-) saturated in Si, and were mainly controlled by the composition of the wall rocks. In contrast, the garnet–biotite alteration formed by interaction with a fluid undersaturated in Si, and was mainly controlled by the fluid composition. This points to major differences in fluid–rock ratios and changes in fluid composition during alteration. The alteration systematics and geometry of the hydrothermal vein system are consistent with cyclic fluctuations in fluid pressure during fault valve action. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Residual-eluvial gold placers in northeastern Russia (Dal’nii placer)

We consider the formation of the Dal’nii (Dal’nyaya) eluvial gold placer (Bol’shoi Anyui ore–placer district, western Chukchi Peninsula), related to the Dal’nii (Dal’nee) gold-bearing porphyry Mo–Cu occurrence. The Dal’nii placer is located within the transition between the Kur’ya Ridge and Anyui basin, which has been relatively stable at the recent (Pliocene–Quaternary) tectonic stage. Minor recent uplift has determined the slight denudation of interfluves, the leading role of eluvial processes in the formation of a loose cover on them, and the preservation of the relict matter of pre-Pliocene chemical-weathering crusts (including the oxidized zones of orebodies) in present-day eluvium. The Dal’nii placer consists of relict weathering-crust placers altered by recent eluvial processes in different degrees. Therefore, it is relatively rich in metal, whereas the primary lode contains mainly fine-sized gold, which is almost not released from ore under periglacial lithogenesis in present-day interfluves. We suggest calling this genetic type of placers “residual-eluvial.” The primary lodes being highly eroded (during the formation of residual concentrations, which serve as an intermediate reservoir for these placers), residual-eluvial placers or their parts might not be directly related to specific orebodies at the present-day level of erosional truncation.     

Microorganisms in Lianxian lateritic gold deposit in Guangdong and their effects on leaching of heavy metals

Microorganisms in the lateritic profiles of the Lianxian gold deposit in Guangdong were cultured, isolated and identified. The microorganisms include bacteria such as Bacillus, Enterobacter, Pseudomonas, Lactobacillus, Actinetobacter, Aeromona, Listeria, Agrobacteriura, Cotyttebacteriurn, and Moraxella, fungi such as Penicillium, Alter naria, Cladosporium, Saccharcornyces, Mucor, and the chemoautotrophic Thiobacillu.~. It is shown in a leaching experiment that the microorganisms can accelerate the leaching of Cu, Cd, Zn, and that the G- bacteria are most efficient for leaching Cu, Zn and the G^ bacteria are better for leaching Cd.     

Is groundwater in the Tarkwa gold mining district of Ghana potable?

Hand-pump wells in the Tarkwa gold mining district and the geologically similar Bui area were chemically analysed and compared in an effort to determine whether groundwaters in the Tarkwa area have been affected by mining. Significant chemical differences attributed to mine water discharges have been observed in streams in the Tarkwa area. Groundwater chemistry from hand-pump wells in Tarkwa and Bui areas reveal similar hydrochemical facies, predominantly Ca–Na–Mg–HCO₃–Cl. However, except for SO₄^2–, ionic concentrations of groundwaters from Bui are greater than those from Tarkwa probably due to differences in (1) water availability during sedimentation (2) water-rock interactions and/or residence times for water. No demonstrable impact of mining on groundwaters from hand-pumped wells in the Tarkwa area has been noted. Hydrogeological inference suggests that the main streams which receive mine water discharges are both gaining and are groundwater divides. The overwhelming majority of population centres and mining operations are located on opposite sides of these groundwater divides, therefore, it is unlikely aquifers tapped for drinking by these communities would be affected by mining.     

Platiniferous gold–tourmaline aggregates in the gold–palladium belt of Minas Gerais,Brazil: implications for regional boron metasomatism

Mineralogy and Petrology - The platiniferous gold–palladium belt of Minas Gerais, Brazil, forms an approximately 240-km-long, roughly north–south-trending domain that includes numerous...     

Gold dispersion in tropical weathering profiles at the Belikombone gold anomaly (Bétaré Oya gold district), east Cameroon

The distribution of gold in the weathering blanket at the Belikombone gold prospect in east Cameroon provides insights into gold mobility in the secondary environment and in tropical terrains worldwide. Both gridline-controlled sampling of topsoil (surface samples) and sampling of various layers in pits are used and the gold assay for each sample determined by NiS fire assay with ICP-AES finish. One hundred and thirty-two (132) surface samples and a total of 206 samples from 19 exploration pits were analyzed. The results from the topsoil samples show an anomaly with the highest Au concentration at 5.9 mgkg⁻¹. The mineralization corridor follows a NE-SW trend. The horizons within the pits range from sap rock at the base, through saprolite, rubble layer rich in relict quartz material to a ferruginous loose layer at the top although some horizons are missing in some pits. All the layers contain gold and the highest concentration in the sap rock horizon is 3.4 mgkg⁻¹ while the rubble layer has a gold high of 6.1 mgkg⁻¹. The individual soil horizons show no systematic gold trends and given the presence of gold in all layers, the patterns point towards supergene dissolution and redistribution of gold. Gold enrichment within the upper horizons in the weathering blanket is attributed to sequestration by Fe oxides of chemically remobilized gold. However, the high gold content within the sap rock and saprolite layers suggests that migration of gold in the particulate form supersedes chemical gold redistribution. Particulate gold obtained by panning samples from the pits varies in shape from euhedral, elongated to irregular. Electron microprobe analysis on the grains record high contents of gold in the rim zones (90.0 to 99.8 wt%). The cores are relatively rich in Ag (12.6 to 14.2 wt%) while the rims are poor in Ag. The low Ag content in the rims is attributed to the preferential leaching of Ag. The soil pH value in this area varies between 3.6 and 7.3. Under such acidic to near neutral conditions, bisulfide and thiosulfate ions can dissolve and transport Au and Ag to be precipitated under surficial conditions creating authigenic Au haloes especially in the saprolite and sap rock layers. Such pH values together with oxidizing Eh conditions explain the solubility of gold in the area. These results are important for geochemical exploration of gold in tropical terrains, and confirm previous studies.     

Prospectivity for epithermal gold–silver deposits in the Deseado Massif,Argentina

Previous prospectivity modelling for epithermal Au–Ag deposits in the Deseado Massif, southern Argentina, provided regional-scale prospectivity maps that were of limited help in guiding exploration activities within districts or smaller areas, because of their low level of detail. Because several districts in the Deseado Massif still need to be explored, prospectivity maps produced with higher detail would be more helpful for exploration in this region.We mapped prospectivity for low- and intermediate-sulfidation epithermal deposits (LISEDs) in the Deseado Massif at both regional and district scales, producing two different prospectivity models, one at regional scale and the other at district-scale. The models were obtained from two datasets of geological evidence layers by the weights-of-evidence (WofE) method. We used more deposits than in previous studies, and we applied the leave-one-out cross validation (LOOCV) method, which allowed using all deposits for training and validating the models. To ensure statistical robustness, the regional and district-scale models were selected amongst six combinations of geological evidence layers based on results from conditional independence tests.The regional-scale model (1000 m spatial resolution), was generated with readily available data, including a lithological layer with limited detail and accuracy, a clay alteration layer derived from a Landsat 5/7 band ratio, and a map of proximity to regional-scale structures. The district-scale model (100 m spatial resolution) was generated from evidence layers that were more detailed, accurate and diverse than the regional-scale layers. They were also more cumbersome to process and combine to cover large areas. The evidence layers included clay alteration and silica abundance derived from ASTER data, and a map of lineament densities. The use of these evidence layers was restricted to areas of favourable lithologies, which were derived from a geological map of higher detail and accuracy than the one used for the regional-scale prospectivity mapping.The two prospectivity models were compared and their suitability for prediction of the prospectivity in the district-scale area was determined. During the modelling process, the spatial association of the different types of evidence and the mineral deposits were calculated. Based on these results the relative importance of the different evidence layers could be determined. It could be inferred which type of geological evidence could potentially improve the modelling results by additional investigation and better representation.We conclude that prospectivity mapping for LISEDs at regional and district-scales were successfully carried out by using WofE and LOOCV methods. Our regional-scale prospectivity model was better than previous prospectivity models of the Deseado Massif. Our district-scale prospectivity model showed to be more effective, reliable and useful than the regional-scale model for mapping at district level. This resulted from the use of higher resolution evidential layers, higher detail and accuracy of the geological maps, and the application of ASTER data instead of Landsat ETM + data. District-scale prospectivity mapping could be further improved by: a) a more accurate determination of the age of mineralization relative to that of lithological units in the districts; b) more accurate and detailed mapping of the favourable units than what is currently available; c) a better understanding of the relationships between LISEDs and the geological evidence used in this research, in particular the relationship with hydrothermal clay alteration, and the method of detection of the clay minerals; and d) inclusion of other data layers, such as geochemistry and geophysics, that have not been used in this study.     

Mercury in sediments from gold and copper exploitation areas in the Camaquã River Basin,Southern Brazil

Mercury concentrations were determined in stream sediments from the Camaquã River Basin, located in the shield region of the state of Rio Grande do Sul, southern Brazil. The resulting geochemical data show that overbank floodplain deposits exhibit higher concentrations than sediments collected from the active channel bed. In addition, higher Hg concentrations were measured in the fine(<63 μm) sediment fraction of the samples. Total Hg concentrations in the fine fraction of active stream sediments from Lavras do Sul County, which have been influenced by past gold mining activities, have decreased during the last five years to values ≤142 ng g⁻¹. However, in a settling pond containing abandoned mine wastes, the Hg concentration of a bulk sample remained exceptionally high (5220 ng g⁻¹). Preliminary speciation results show that Hg⁰ is the predominant species in most of the samples. This was the form of Hg released by the gold amalgamation activities in the area, and appears to be relatively stable under the existing E_h and pH conditions.     

Native gold in complex Ti–Zr placers of the southern West Siberian Plain

Typomorphic features of native gold and its contents in complex Ti–Zr placers in the southern West Siberian Plain are reported. Three of the placers are of littoral-marine genesis, and two formed under conditions of an alluvial piedmont plain. Native gold from the studied Ti–Zr placers occurs mainly as flattened thin (?0.1 mm) particles which underwent mechanical action. It is marked by wide fineness variation and the abundance of a very fine (990–1000‰) variety. Most likely, this is chemically transformed clastogenic metal. The gold content of the productive bed (5–30 mg/m³ native gold and 8–140 ppb bulk gold) is consistent with the dispersion of heavy ore and accessory minerals during mechanical migration in water flows simultaneously with their concentration on geochemical barriers. The native-gold content of complex Ti–Zr placers shows a higher negative correlation with the primary source–placer distance than those of Ti and Zr minerals and a positive correlation with the degree of hydrodynamic reworking (gravity concentration) of transit terrigenous material. On the southern framing of the West Siberian Plain, some regions of northern Kazakhstan are promising for gold of complex Ti–Zr placers as well as fine- and thin-gold placers, gold-bearing weathering crusts, and primary gold deposits.     

Structural geochemistry of gold mineralization in the Linglong-Jiaojia district, Shandong Province, China

The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.     

Arsenic mobility from arsenopyrite-rich gold mine waste in Snow Lake, Manitoba, Canada

Local water contamination by arsenic can be caused by gold mining activities as in Snow Lake, Manitoba. This project was to f＇md the source （s） and pathways of the arsenic contamination and describe arsenic attenuation in ground and surface water. The project was initiated because arsenic concentrations average 16.0 mg/L in one groundwater monitoring well （MW17）. One potential source of arsenic is the 50 year-old Arsenopyrite Residue Stockpile （ARS）, 100 m upgrade of MW17. Between 1948 and 1959, 250000 tons of cyanide treated, arsenopyrite concentrate were stored in a waste rock impoundment, which was left open until 2000 when it was capped with layers of waste rock, clay and silt to minimize water infiltration and the oxidative release of arsenic.     

Assessment of gold mineralisation in Osu–Amuta–Itagunmodi areas,Southwestern Nigeria

Tight conglomerate reservoirs have complex pore structure and strong heterogeneity which could bring great difficulties in the identification of oil and wa