The critical role of climate and saprolite weathering in landscape evolution

Landscapes evolve in response to external forces, such as tectonics and climate, that influence surface processes of erosion and weathering. Internal feedbacks between erosion and weathering also play an integral role in regulating the landscapes response. Our understanding of these internal and external feedbacks is limited to a handful of field‐based studies, only a few of which have explicitly examined saprolite weathering. Here, we report rates of erosion and weathering in saprolite and soil to quantify how climate influences denudation, by focusing on an elevation transect in the western Sierra Nevada Mountains, California. We use an adapted mass balance approach and couple soil‐production rates from the cosmogenic radionuclide (CRN) ¹⁰Be with zirconium concentrations in rock, saprolite and soil. Our approach includes deep saprolite weathering and suggests that previous studies may have underestimated denudation rates across similar landscapes. Along the studied climate gradient, chemical weathering rates peak at middle elevations (1200–2000 m), averaging 112·3 ± 9·7 t km^–2 y^–1 compared to high and low elevation sites (46·8 ± 5·2 t km^?2 y^?1). Measured weathering rates follow similar patterns with climate as those of predicted silica fluxes, modeled using an Arrhenius temperature relationship and a linear relationship between flux and precipitation. Furthermore, chemical weathering and erosion are tightly correlated across our sites, and physical erosion rates increase with both saprolite weathering rates and intensity. Unexpectedly, saprolite and soil weathering intensities are inversely related, such that more weathered saprolites are overlain by weakly weathered soils. These data quantify exciting links between climate, weathering and erosion, and together suggest that climate controls chemical weathering via temperature and moisture control on chemical reaction rates. Our results also suggest that saprolite weathering reduces bedrock coherence, leading to faster rates of soil transport that, in turn, decrease material residence times in the soil column and limit soil weathering. Copyright © 2009 John Wiley & Sons, Ltd.     

Coupling chemical weathering with soil production across soil‐mantled landscapes

Soil‐covered upland landscapes constitute a critical part of the habitable world. Our understanding of how they evolve as a function of different climatic, tectonic and geological regimes is important across a wide range of disciplines and depends, in part, on understanding the links between chemical and physical weathering processes. Extensive previous work has shown that soil production rates decrease with increasing soil column thickness, but chemical weathering rates were not measured. Here we examine a granitic, soil‐mantled hillslope at Point Reyes, California, where soil production rates were determined using in situ produced cosmogenic nuclides (¹⁰Be and ²⁶Al), and we quantify the extent as well as the rates of chemical weathering of the saprolite from beneath soil from across the landscape. We collected saprolite samples from the base of soil pits and analysed them for abrasion pH as well as for major and trace elements by X‐ray fluorescence spectroscopy, and for clay mineralogy by X‐ray diffraction spectroscopy. Our results show for the first time that chemical weathering rates decrease with increasing soil thickness and account for 13 to 51 per cent of total denudation. We also show that spatial variation in chemical weathering appears to be topographically controlled: weathering rate decreases with slope across the divergent ridge and increases with upslope contributing area in the convergent swale. Furthermore, to determine the best measure for the extent of saprolite weathering, we compared four different chemical weathering indices – the Vogt ratio, the chemical index of alteration (CIA), Parker's index, and the silicon–aluminium ratio – with saprolite pH. Measurements of the CIA were the most closely correlated with saprolite pH, showing that weathering intensity decreases linearly with an increase in saprolite pH from 4·7 to almost 7. Data presented here are among the first to couple directly rates of soil production and chemical weathering with how topography is likely to control weathering at a hillslope scale. Copyright © 2006 John Wiley & Sons, Ltd.     

Climate controls on coupled processes of chemical weathering,bioturbation, and sediment transport across hillslopes

Most hillslope studies examining the interplay between climate and earth surface processes tend to be biased towards eroding parts of landscapes. This limitation makes it difficult to assess how entire upland landscapes, which are mosaics of eroding and depositional areas, evolve physio‐chemically as a function of climate. Here we combine new soil geochemical data and published ¹⁰Be‐derived soil production rates to estimate variations in chemical weathering across two eroding‐to‐depositional hillslopes spanning a climate gradient in southeastern Australia. At the warmer and wetter Nunnock River (NR) site, rates of total soil (–3 to –14 g m^‐2 yr^‐1; negative sign indicates mass loss) and saprolite (–18 to –32 g m^‐2 yr^‐1) chemical weathering are uniform across the hillslope transect. Alternatively, the drier hillslope at Frog's Hollow (FH) is characterized by contrasting weathering patterns in eroding soils (–30 to –53 g m^‐2 yr^‐1) vs. depositional soils (+91 g m^‐2 yr^‐1; positive sign indicates mass addition). This difference partly reflects mineral grain size sorting as a result of upslope bioturbation coupled with water‐driven soil erosion, as well as greater vegetative productivity in moister depositional soils. Both of these processes are magnified in the drier climate. The data reveal the importance of linking the erosion–deposition continuum in hillslope weathering studies in order to fully capture the coupled roles of biota and erosion in driving the physical and chemical evolution of hillslopes. Our findings also highlight the potential limitations of applying current weathering models to landscapes where particle‐sorting erosion processes are active. Copyright © 2018 John Wiley & Sons, Ltd.     

Constraining landscape development of the Sri Lankan escarpment with cosmogenic nuclides in river sediment

Escarpments are prominent morphological features along high-elevation passive margins. Recent studies integrating geomorphology, thermochronology, and cosmogenic nuclide-based denudation rate estimates suggest a rapid phase of denudation immediately after the earliest stages of seafloor spreading, and subsequent slow denudation rates since. To constrain the geomorphic evolution of passive margins, we have examined the development of the Sri Lankan escarpment. Cosmogenic nuclide data on river sediment along a north–south transect across the southern escarpment reveal that the landscape is eroding ten times more rapidly in the escarpment zone (26 to 71 mm kyr^− 1) than in the high-elevation plateau above it and in the lowland plain beneath it (2.6 to 6.2 mm kyr^− 1). Unlike these low denudation rate areas, the escarpment denudation is strongly and linearly hill slope-dependent. This shows that denudation and retreat are tightly interlinked within the escarpment, which suggests that the escarpment is evolving by rift-parallel retreat, rather than by escarpment downwearing. Supporting evidence is provided by the morphology of rivers draining the escarpment zone. These have steep bedrock channels which show sharp and prominent knickpoints along their longitudinal profiles. It appears that fluvial processes are driving escarpment retreat, as rivers migrate headwards were they incise into the high-elevation plateau. However, the average catchment-wide denudation rates of the escarpment zone are low compared to the denudation rates that are estimated for constant escarpment retreat since rifting. In common with other escarpments worldwide, causes for this slow down can be tectonic change related to flexural bending of the lithosphere, climate change that would vary the degree of precipitation focused into the escarpment, or the decrease in the contributing catchment area, which would reduce the stream power available for fluvial erosion.     

40Ar / 39Ar geochronology constraints on late miocene weathering rates in Minas Gerais,Brazil

⁴⁰Ar / ³⁹Ar incremental heating ages for twenty one grains of cryptomelane, collected at 0, 42, 45, and 60 m depths in the Cachoeira Mine weathering profile, Minas Gerais, permit calculating long-term (10 Ma time scale) weathering rate (saprolitization rate) in SE Brazil. Pure well-crystallized cryptomelane grains with high K contents (3–5 wt.%) yield reliable geochronological results. The ⁴⁰Ar / ³⁹Ar plateau ages obtained decrease from the top to the bottom of the profile (12.7 ± 0.1 to 7.6 ± 0.1 Ma at surface; 7.6  ± 0.2 to 6.1 ± 0.2 Ma at 42 m; and 7.1 ± 0.2 to 5.9 ± 0.1 Ma at 45 m; 6.6 ± 0.1 to 5.2 ± 0.1 Ma at 60 m), yielding a weathering front propagation rate of 8.9 ± 1.1 m/m.y. From the geochronological results and the mineral transformations implicit by the current mineralogy in the weathering profiles, it is possible to calculate the saprolitization rate for the Cachoeira Mine lithologies and for adjacent weathering profiles developed on granodiorites and schists. The measured weathering front propagation rate yields a saprolitization rate of 24.9 ± 3.1 t/km²/yr. This average long-term (> 10 Ma) saprolitization rate is consistent with mass balance calculations results for present saprolitization rates in weathering watersheds. These results are also consistent with long-term saprolitization rates estimated by combining cosmogenic isotope denudation rates with mass balance calculations.     

Potential of in situ-produced cosmogenic nuclides for quantifying strength reduction of bedrock in soil-mantled hillslopes

This study presents a semi-empirical model for quantifying the reduction in the mechanical strength of bedrock beneath actively eroding soil-mantled hillslopes. The strength reduction of bedrock controls the rate of physical disintegration of saprolite, which supplies fresh minerals that are then exposed to intense chemical weathering in soil sections. To determine the values of parameters employed in the model requires knowledge of the denudation rate of the hillslope, the thickness of the soil and saprolite layers, the strength of fresh bedrock, and the threshold strength for physical erosion at the uppermost face of the saprolite. These parameters can be obtained from cosmogenic nuclide analyses for quartz samples from the soil–saprolite boundary and basic field- and laboratory-based investigations. Further testing of the model within a diverse range of climatic, tectonic, and lithologic environments is likely to provide clues to the mechanisms responsible for local and regional variations in the rates of soil production and chemical weathering upon hillslopes.     

Denudation and retreat of the Serra do Mar escarpment in southern Brazil derived from in situ‐produced 10Be concentration in river sediment

The Serra do Mar escarpment, located along the southeastern coast of Brazil, is a high‐elevation passive margin escarpment. This escarpment evolved from the denudation of granites, migmatites and gneisses. The granites outcrop in the form of a ridge along the escarpment crest, due to its differential erosion (‘sugarloaf’ hills) from the surrounding lithologies. Several studies suggest that the passive margin escarpments are actively retreating toward the interior of the continent. However, no prior study has calculated the long‐term denudation rates of Serra do Mar to test this hypothesis. In this study, we measured the in situ‐produced ¹⁰Be concentration in fluvial sediments to quantify the catchment‐wide long‐term denudation rates of the Serra do Mar escarpment in southern Brazil. We sampled the fluvial sediments from ten watersheds that drain both sides of the escarpment. The average long‐term denudation rate of the oceanic side is between 2.1‐ and 2.6‐fold higher than the rate of the continental side: 26.04 ± 1.88 mm ka^‐1 (integrating over between 15.8 ka^‐1 and 46.6 ka^‐1) and 11.10 ± 0.37 mm ka^‐1 (integrating over between 52.9 ka^‐1 and 85.4 ka^‐1), respectively. These rates indicate that the coastal base level is controlling the escarpment retreat toward the continental high lands, which is consistent with observations made at other high‐elevation passive margins around the globe. The results also demonstrate the differential erosion along the Serra do Mar escarpment in southern Brazil during the Quaternary, where drainages over granites had lower average denudation rates in comparison with those over migmatites and gneisses. Moreover, the results demonstrate that the ocean‐facing catchments have been eroded more intensely than those facing the continent. The results also reveal that drainage over the granites decreases the average denudation rates of the ocean‐facing catchments and the ‘sugarloaf’ hills therefore are natural barriers that slowly retreat once they are exhumed. Copyright © 2013 John Wiley & Sons, Ltd.     

Strength matters: Resisting erosion across upland landscapes

Soil-covered upland landscapes comprise a critical part of the habitable world and our understanding of their evolution as a function of different climatic, tectonic, and geologic regimes is important across a wide range of disciplines. Soil production and transport play essential roles in controlling the spatial variation of soil depth and therefore hillslope hydrological processes, distribution of vegetation, and soil biological activity. Field-based confirmation of the hypothesized relationship between soil thickness and soil production is relatively recent, however, and here we quantify a direct, material strength-based influence on variable soil production across landscapes. We report clear empirical linkages between the shear strength of the parent material (its erodibility) and the overlying soil thickness. Specifically, we use a cone penetrometer and a shear vane to determine saprolite resistance to shear. We find that saprolite shear strength increases systematically with overlying soil thickness across three very different field sites where we previously quantified soil production rates. At these sites, soil production rates, determined from in situ produced beryllium-10 (¹⁰Be) and aluminum-26 (²⁶Al), decrease with overlying soil thickness and we therefore infer that the efficiency of soil production must decrease with increasing parent material shear strength. We use our field-based data to help explain the linkages between biogenic processes, chemical weathering, hillslope hydrology, and the evolution of the Earth's surface. © 2019 John Wiley & Sons, Ltd.     

Quantifying river incision into low‐relief surfaces using local and catchment‐wide 10Be denudation rates

Relief generation in non‐glaciated regions is largely controlled by river incision into bedrock but datable fluvial terraces that allow quantifying incision rates are not always present. Here we suggest a new method to determine river incision rates in regions where low‐relief surfaces are dissected by streams. The approach consists of three steps and requires the ¹⁰Be concentrations of a stream sediment sample and a regolith sample from the low‐relief surface. In the first step, the spatial distribution of ¹⁰Be surface concentrations in the given catchment is modelled by assuming that denudation rates are controlled by the local hillslope angles. The slope–denudation rate relation for this catchment is then quantified by adjusting the relation between slope angle and denudation rate until the average ¹⁰Be concentration in the model is equal to the one measured in the stream sediment sample. In the second step, curved swath profiles are used to measure hillslope angles adjacent to the main river channel. Third, the mean slope angle derived from these swath profiles and the slope–denudation relation are used to quantify the river incision rate (assuming that the incision rate equals the denudation rate on adjacent hillslopes). We apply our approach to two study areas in southern Tibet and central Europe (Black Forest). In both regions, local ¹⁰Be denudation rates on flat parts of the incised low‐relief surface are lower than catchment‐wide denudation rates. As the latter integrate across the entire landscape, river incision rates must exceed these spatially averaged denudation rates. Our approach yields river incision rates between ~15 and ~30 m/Ma for the Tibetan study area and incision rates of ~70 to ~100 m/Ma in the Black Forest. Taking the lowering of the low‐relief surfaces into account suggests that relief in the two study areas increases at rates of 10–20 and 40–70 m/Ma, respectively. Copyright © 2018 John Wiley & Sons, Ltd.     

Strong climate and tectonic control on plagioclase weathering in granitic terrain

Investigations to understand linkages among climate, erosion and weathering are central to quantifying landscape evolution. We approach these linkages through synthesis of regolith data for granitic terrain compiled with respect to climate, geochemistry, and denudation rates for low sloping upland profiles. Focusing on Na as a proxy for plagioclase weathering, we quantified regolith Na depletion, Na mass loss, and the relative partitioning of denudation to physical and chemical contributions. The depth and magnitude of regolith Na depletion increased continuously with increasing water availability, except for locations with mean annual temperature < 5 °C that exhibited little Na depletion, and locations with physical erosion rates < 20 g m^? 2 yr^? 1 that exhibited deep and complete regolith Na depletion. Surface Na depletion also tended to decrease with increasing physical erosion. Depth-integrated Na mass loss and regolith depth were both three orders of magnitude greater in the fully depleted, low erosion rate sites relative to other locations. These locations exhibited strong erosion-limitation of Na chemical weathering rates based on correlation of Na chemical weathering rate to total Na denudation. Sodium weathering rates in cool locations with positive annual water balance were strongly correlated to total Na denudation and precipitation, and exhibited an average apparent activation energy (Ea) of 69 kJ mol^? 1 Na. The remaining water-limited locations exhibited kinetic limitation of Na weathering rates with an Ea of 136 kJ mol^? 1 Na, roughly equivalent to the sum of laboratory measures of Ea and dissolution reaction enthalpy for albite. Water availability is suggested as the dominant factor limiting rate kinetics in the water-limited systems. Together, these data demonstrate marked transitions and nonlinearity in how climate and tectonics correlate to plagioclase chemical weathering and Na mass loss.     

Erosion rates and mechanisms of knickzone retreat inferred from 10Be measured across strong climate gradients on the northern and central Andes Western Escarpment

A steep escarpment edge, deep gorges and distinct knickzones in river profiles characterize the landscape on the Western Escarpment of the Andes between ~5°S and ~18°S (northern Peru to northern Chile). Strong north–south and east–west precipitation gradients are exploited in order to determine how climate affects denudation rates in three river basins spanning an otherwise relatively uniform geologic and geomorphologic setting. Late Miocene tectonics uplifted the Meseta/Altiplano plateau (~3000 m a.s.l.), which is underlain by a series of Tertiary volcanic‐volcanoclastic rocks. Streams on this plateau remain graded to the Late Miocene base level. Below the rim of the Meseta, streams have responded to this ramp uplift by incising deeply into fractured Mesozoic rocks via a series of steep, headward retreating knickzones that grade to the present‐day base level defined by the Pacific Ocean. It is found that the Tertiary units on the plateau function as cap‐rocks, which aid in the parallel retreat of the sharp escarpment edge and upper knickzone tips. ¹⁰Be‐derived catchment denudation rates of the Rio Piura (5°S), Rio Pisco (13°S) and Rio Lluta (18°S) average ~10 mm ky^?1 on the Meseta/Altiplano, irrespective of precipitation rates; whereas, downstream of the escarpment edge, denudation rates range from 10 mm ky^?1 to 250 mm ky^?1 and correlate positively with precipitation rates, but show no strong correlation with hillslope angles or channel steepness. These relationships are explained by the presence of a cap‐rock and climate‐driven fluvial incision that steepens hillslopes to near‐threshold conditions. Since escarpment retreat and the precipitation pattern were established at least in the Miocene, it is speculated that the present‐day distribution of morphology and denudation rates has probably remained largely unchanged during the past several millions of years as the knickzones have propagated headward into the plateau. Copyright © 2011 John Wiley & Sons, Ltd.     

Thermochronological data from Sudan in the frame of the denudational history of the Nubian Red Sea margin

Low‐temperature thermochronology provides information on the timing of rifting and denudation of passive margins, and the Red Sea with its well‐exposed, young rift margins is a suitable setting for its application. Here we present new apatite fission‐track (AFT) data from Sudan northern hinterland and Red Sea coastal areas. From the former region we obtained ages between 270 ± 2 Ma ad 253 ± 53 Ma, and from the coastal belt between 83 ± 8 Ma and 39 ± 7 Ma. These data prompted a review and comparison with low‐temperature thermochronological data from the whole Nubian Red Sea Margin, and a discussion on their implication in assessing the margin evolutionary style. AFT data are available for Egypt and Eritrea as well as apatite (U‐Th)/He (AHe) ages for two transects transversal to the margin in Eritrea. Both in Egypt and Eritrea AFT data record a cooling event at about 20–25 Ma (Early Miocene) and an earlier, more local, cooling event in Egypt at about 34 Ma (Early Oligocene). The thermal modeling of the Sudan samples provides an indication of a rapid cooling in Miocene times, but does not support nor rules out an Early Oligocene cooling phase. The re‐assessment of new and existing thermochronological data within the known geological framework of the Nubian and conjugate Arabian margins favours the hypothesis that early rifting stages were affecting the whole Gulf of Suez–Red Sea–Gulf of Aden system since the Oligocene. These precocious, more attenuated, phases were followed by major extension in Miocene times. As to the mode of margin evolution, AFT age patterns both in Egypt and Eritrea are incompatible with a downwarp model. The distribution of AHe ages across the Eritrean coastal plain suggests that there the escarpment was evolving predominantly by plateau degradation. Copyright © 2009 John Wiley & Sons, Ltd.     

Meteoric 10Be concentrations from saprolite and till in northern Sweden: Implications for glacial erosion and age

We examine ¹⁰Be concentration in two pit profiles in the Parkajoki area at ∼67°N on the northern Fennoscandian shield in northern Sweden. Due to repeated cover by cold-based, non-erosive ice sheets, the area retains many relict non-glacial features, including tors and saprolites. In the examined pit profiles, gruss-type saprolite developed from weathering of intermediate igneous rocks is overlain unconformably by Weichselian till.Our results show that ¹⁰Be concentrations found in the till greatly exceed the levels of ¹⁰Be that can have accumulated since deglaciation at ∼11 ka and are comparable to those reported from Pliocene and Early Pleistocene tills in North America. Old tills with grussified boulders at depth were excavated in the Parkajoki area and correlations with neighbouring parts of Finland indicate a Middle Pleistocene or older age. Evidence from pit excavations and geochemistry shows that the underlying saprolites have been truncated by glacial erosion and that previously weathered material has been incorporated into the till sequence. Hence, ¹⁰Be inventories in the tills are dominated by material recycled from Middle Pleistocene or older soils, near-surface sediments and saprolite, and cannot be used to date the periods of till deposition. The retention of relict ¹⁰Be in the tills nonetheless confirms minimal glacial erosion.Concentrations of meteoric ¹⁰Be in the saprolites are lower than any reported saprolite concentrations measured in other settings. Uncertainty in the pre-glaciation ¹⁰Be concentrations in the saprolites makes age determinations difficult. One possibility is that that the saprolite had higher ¹⁰Be concentrations in the past but that saprolite formation ended after glaciation and burial by till and that the ¹⁰Be has substantially decayed. Modelling of the meteoric ¹⁰Be depth profiles in this case suggests that the saprolites in the Parkajoki area were formed at a minimum of 2 Ma. Erosion of the saprolite allows an older age of up to ∼5 Ma, with up to 250 cm of material removed and incorporated into later tills. A second possibility is that concentrations of meteoric ¹⁰Be in the saprolite were originally lower, with formation of the saprolite in a period or periods of ice- and permafrost-free conditions before 0.8 Ma.     

Effects of long soil surface residence times on apparent cosmogenic nuclide denudation rates and burial ages in the Cradle of Humankind,South Africa

In situ cosmogenic nuclides are an important tool for quantifying landscape evolution and dating fossil-bearing deposits in the Cradle of Humankind (CoH), South Africa. This technique mainly employs cosmogenic 10-Beryllium (¹⁰Be) in river sediments to estimate denudation rates and the ratio of 26-Aluminium (²⁶Al) to ¹⁰Be (²⁶Al/¹⁰Be), to constrain ages of sediment burial. Here, we use ¹⁰Be and ²⁶Al concentrations in bedrock and soil above the Rising Star Cave (the discovery site of Homo naledi) to constrain the denudation rate and the exposure history of soil on the surface. Apparent ¹⁰Be-derived denudation rates obtained from pebble- to cobble-sized clasts and coarse-sand in soil (on average 3.59 ± 0.27 m/Ma and 3.05 ± 0.25 m/Ma, respectively) are 2-3 times lower than the bedrock denudation rates (on average 9.46 ± 0.68 m/Ma). In addition, soil samples yield an average ²⁶Al/¹⁰Be ratio (5.12 ± 0.27) that is significantly lower than the surface production ratio of 6.75, which suggests complex exposure histories. These results are consistent with prolonged surface residence of up to 1.5 Ma in vertically mixed soils that are up to 3 m thick. We conclude that the ¹⁰Be concentrations accumulated in soils during the long near-surface residence times can potentially cause underestimation of single-nuclide (¹⁰Be) catchment-wide denudation rates in the CoH. Further, burial ages of cave sediment samples that consist of an amalgamation of sand-size quartz grains could be overestimated if a pre-burial ²⁶Al/¹⁰Be ratio calculated from the surface production is assumed. © 2019 John Wiley & Sons, Ltd.     

Hillslope erosion measurement—a simple approach to a complex process

The measurement of hillslope erosion can be a difficult, costly and time‐consuming activity. Many techniques are available, ranging from using environmental tracers, to LiDAR. Erosion measurements using erosion pins are assessed and compared with regional scale erosion data, hillslope data obtained using ¹³⁷Cs and erosion modelling results. The pins produced erosion rates which are within the range determined using ¹³⁷Cs and model data but above that of regional denudation rates. Our findings demonstrate that inexpensive erosion pins can provide reliable data on hillslope erosion. © 2015 Commonwealth of Australia. Hydrological Processes © 2015 John Wiley & Sons Ltd.     

Bedrock erosion and relief production in the northern Flinders Ranges,Australia

Cosmogenic ¹⁰Be concentrations in exposed bedrock surfaces and alluvial sediment in the northern Flinders Ranges reveal surprisingly high erosion rates for a supposedly ancient and stable landscape. Bedrock erosion rates increase with decreasing elevation in the Yudnamutana Catchment, from summit surfaces (13·96 ± 1·29 and 14·38 ± 1·40 m Myr^?1), to hillslopes (17·61 ± 2·21 to 29·24 ± 4·38 m Myr^?1), to valley bottoms (53·19 ± 7·26 to 227·95 ± 21·39 m Myr^?1), indicating late Quaternary increases to topographic relief. Minimum cliff retreat rates (9·30 ± 3·60 to 24·54 ± 8·53 m Myr^?1) indicate that even the most resistant parts of cliff faces have undergone significant late Quaternary erosion. However, erosion rates from visibly weathered and varnished tors protruding from steep bedrock hillslopes (4·17 ± 0·42 to 14·00 ± 1·97 m Myr^?1) indicate that bedrock may locally weather at rates equivalent to, or even slower than, summit surfaces. ¹⁰Be concentrations in contemporary alluvial sediment indicate catchment‐averaged erosion at a rate dominated by more rapid erosion (22·79 ± 2·78 m Myr^?1), consistent with an average rate from individual hillslope point measurements. Late Cenozoic relief production in the Yudnamutana Catchment resulted from (1) tectonic uplift at rates of 30–160 m Myr^?1 due to range‐front reverse faulting, which maintained steep river gradients and uplifted summit surfaces, and (2) climate change, which episodically increased both in situ bedrock weathering rates and frequency–magnitude distributions of large magnitude floods, leading to increased incision rates. These results provide quantitative evidence that the Australian landscape is, in places, considerably more dynamic than commonly perceived. Copyright © 2006 John Wiley & Sons, Ltd.     

Complex multiple cosmogenic nuclide concentration and histories in the arid Rio Lluta catchment,northern Chile

Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of ¹⁰Be, ²¹Ne and ²⁶Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr^–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr^–1), established with the noble gas ²¹Ne, is in accordance with palaeodenudation rates derived from ²¹Ne/¹⁰Be and ²⁶Al/¹⁰Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide ²¹Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single ²¹Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.     

Contemporary versus long‐term denudation along a passive plate margin: the role of extreme events

Short‐term (contemporary) and long‐term denudation rates were determined for the Blue Mountains Plateau in the western Sydney Basin, Australia, to explore the role of extreme events (wildfires and catastrophic floods) in landscape denudation along a passive plate margin. Contemporary denudation rates were reconstructed using 40 years of river sediment load data from the Nattai catchment in the south‐west of the basin, combined with an analysis of hillslope erosion following recent wildfires. Long‐term denudation rates (10 kyr–10 Myr) were determined from terrestrial cosmogenic nuclides, apatite fission track thermochronology and post‐basalt flow valley incision. Contemporary denudation rates average several times lower than the long‐term average (5·5 ± 4 mm kyr^?1 versus 21·5 ± 7 mm kyr^?1). Erosion of sediment following wildfires accounts for only a small proportion (5%) of the contemporary rate. Most post‐fire sediment is stored on the lower slopes and valley floor, with the amount transported to the river network dependent on rainfall–run‐off conditions within the first few years following the fire. Historical catastrophic floods account for a much larger proportion (35%) of the contemporary erosion rate, and highlight the importance of these events in reworking stored material. Evidence for palaeofloods much larger than those experienced over the past 200 years suggests even greater sediment export potential. Mass movement on hillslopes along valleys incised into softer lithology appears to be a dominant erosion process that supplies substantial volumes of material to the valley floor. It is possible that a combination of infrequent mass movement events and high fluvial discharge could account for a significant proportion of the discrepancy between the contemporary and long‐term denudation rates. Copyright © 2006 John Wiley & Sons, Ltd.     

The spatial variation of weathering and soil depth across a Triassic sandstone outcrop

In this study, we used an archive of borehole logs from the British Geological Survey to collect information on the spatial structure of weathering that extends from the surface to competent bedrock across the Triassic Sherwood Sandstone Group outcrop (750 km²), in the East Midlands, UK. The borehole logs were used to estimate the thickness of the soil (n = 280) and soil and saprolite (S&S) to competent rock (n = 500). The weathering profile of the sandstone consisted of soil (median thickness ～ 1·5 m) overlying a transition zone of compacted and weakly cemented weathered sandstone saprolite over bedrock. Topographic analysis using a NEXTMAP 5 m × 5 m digital elevation model (DEM) revealed no significant relationships between slope properties (relief, flow length, flow accumulation or slope angle) and soil or S&S thickness. A weak, but statistically significant correlation was found between the thickness of the soil and S&S (r_s = 0·25, p < 0·001, n = 192). The variation in soil thickness may be related to changes in current and historic and land‐use, variation in sandstone properties and the influence of glacial/peri‐glacial processes. The thickness of the saprolite was more variable towards the southern part of the study area, where it increased to a maximum 40 m. We hypothesize and provide evidence that the greater weathering thickness is related to the occurrence of increased faulting in this part of the study region, allowing increased access to meteoric waters. A possible source of increased water supply is meltwater from Quaternary ice sheets; the overburden of ice may have increased sub‐glacial pore water pressure, with the fractures and faults acting as a drainage system for the removal of dissolved weathering products. British Geological Survey © NERC 2010     

Grain size-dependent 10Be concentrations in alluvial stream sediment of the Huasco Valley,a semi-arid Andes region

Terrestrial cosmogenic nuclide concentrations in sediment are used to quantify mean denudation rates in catchments. This article explores the differences between the ¹⁰Be concentration in fine (sand) and in coarse (1–3 or 5–10 cm pebbles) river sediment. Sand and pebbles were sampled at four locations in the Huasco Valley, in the arid Chilean Andes. Sand has ¹⁰Be concentrations between 4.8 and 8.3·10⁵ at g⁻¹, while pebbles have smaller concentrations between 2.2 and 3.3·10⁵ at g⁻¹. It appears that the different concentrations, systematically measured between sand and pebbles, are the result of different denudation rates, linked with the geomorphologic processes that originated them. We propose that the ¹⁰Be concentrations in sand are determined by the mean denudation rate of all of the geomorphologic processes taking place in the catchment, including debris flow processes as well as slower processes such as hill slope diffusion. In contrast, the concentrations in pebbles are probably related to debris flows occurring in steep slopes. The mean denudation rates calculated in the catchment are between 30 and 50 m/Myr, while the denudation rates associated with debris flow are between 59 and 81 m/Myr. These denudation rates are consistent with those calculated using different methods, such as measuring eroded volumes.