Raindrop‐induced saltation and the enrichment of sediment discharged from sheet and interrill erosion areas

Sheet and interrill erosion areas are sources of soil material rich in nutrients and pollutants. The loss of soil, nutrients and other chemicals from these areas is a matter of concern both in terms of maintaining soil productivity and the health of offsite environments. Many experiments on rainfall erosion have shown enrichment of fine material, nutrients and other chemicals in the sediment discharged for sheet and interrill erosion areas, but often these results were obtained over short periods of time. A qualitative mechanistic model of raindrop‐induced saltation is used to illustrate how this transport mechanism influences the composition of sediment discharged by rain‐impacted flow. Initially, fast moving particles are enriched in the sediment discharge but, over time, during a rainfall event, slower moving particles become more represented. Raindrop‐induced saltation promotes the storage of material on the soil surface with a coarser composition than the original soil. Winnowing of material from this storage by the development of flow‐driven saltation during high‐intensity events can modify the composition of the sediment discharged later by raindrop‐induced saltation. Given stable soil particles, the composition of the sediment discharged at the steady state is the same as the original soil. Enrichment is a non‐steady‐state phenomenon and failure to recognize the transient nature of enrichment may lead to inappropriate interpretation of the implications of the results from short‐term experiments. Copyright © 2011 John Wiley & Sons, Ltd.     

Simulations demonstrating interaction between coarse and fine sediment loads in rain‐impacted flow

Rain‐impacted flows dominate sheet and interrill erosion and are important in eroding soil rich in nutrients and other chemicals which may have deleterious effects on water quality. Erosion in rain‐impacted flow is associated with raindrop detachment followed by transport either by the combination of flow velocity and raindrop impact (raindrop‐induced flow transport, RIFT) or the inherent capacity of the flow to transport detached material. Coarse particles tend to be transported by RIFT, while fine particles tend to be transported without any assistance from raindrop impact. Because the transport process associated with coarse particles is not 100 per cent efficient, it generates a layer of loose particles on the soil surface and this layer protects the underlying soil from detachment. Simulations were performed by modelling the uplift and downstream movement of both fine and coarse particles detached from the soil surface by individual raindrop impacts starting with a surface where no loose material was present. The simulations produced a flush of fine material followed by a decline in the discharge of fine material as the amount of loose material built up on the bed. The decline in the discharge of fine material was accompanied by an increase in the discharge of coarse material. The relative amounts of coarse and fine material discharged in the flow varied with flow velocity and cohesion in the surface of the soil matrix. The results indicate that the discharge of various sized sediments is highly dependent on local soil, rain and flow conditions and that extrapolating the results from one situation to another may not be appropriate. Copyright © 2006 John Wiley & Sons, Ltd.     

Modeling of the effect of flow depth on sediment discharged by rain‐impacted flows from sheet and interrill erosion areas: a review

Sediment, nutrients and pollutants discharged from sheet and interrill erosion areas by rain‐impacted flows may influence water quality in streams and rivers. The depth of water on the soil surface influences the capacity of raindrop impacts to detach soil material underlying rain‐impacted flows, and a number of so‐called process‐based and mechanistic models erroneously use equations on the basis of the effect of water depth on splash erosion to account for this effect. Also, a number of these models require complex mathematical solutions to make them operate and can only predict sediment composition and discharges well if many of their parameters are calibrated specifically to the situations where they are being applied. Experiments with rain‐impacted flows, where flow depth and velocity over eroding surfaces have been controlled, have been reported in the literature and provide more appropriate equations to account for the drop size – flow depth interactions that affect detachment and transport of particles in rain‐impacted flows. There is a need to develop modeling approaches that rely on relevant data obtained under well‐controlled flow conditions where flow depths and velocities are known. Copyright © 2012 John Wiley & Sons, Ltd.     

Evaluation of an interrill soil erosion model using laboratory catchment data

Physically based soil erosion simulation models require input parameters of soil detachment and sediment transport owing to the action and interactions of both raindrops and overland flow. A simple interrill soil water transport model is applied to a laboratory catchment to investigate the application of raindrop detachment and transport in interrill areas explicitly. A controlled laboratory rainfall simulation study with slope length simulation by flow addition was used to assess the raindrop detachment and transport of detached soil by overland flow in interrill areas. Artificial rainfall of moderate to high intensity was used to simulate intense rain storms. However, experiments were restricted to conditions where rilling and channelling did not occur and where overland flow covered most of the surface. A simple equation with a rainfall intensity term for raindrop detachment, and a simple sediment transport equation with unit discharge and a slope term were found to be applicable to the situation where clear water is added at the upper end of a small plot to simulate increased slope length. The proposed generic relationships can be used to predict raindrop detachment and the sediment transport capacity of interrill flow and can therefore contribute to the development of physically‐based erosion models. Copyright © 1999 John Wiley & Sons, Ltd.     

Modelling raindrop impact and splash erosion processes within a spatial cell: a stochastic approach

A new approach is proposed to simulate splash erosion on local soil surfaces. Without the effect of wind and other raindrops, the impact of free‐falling raindrops was considered as an independent event from the stochastic viewpoint. The erosivity of a single raindrop depending on its kinetic energy was computed by an empirical relationship in which the kinetic energy was expressed as a power function of the equivalent diameter of the raindrop. An empirical linear function combining the kinetic energy and soil shear strength was used to estimate the impacted amount of soil particles by a single raindrop. Considering an ideal local soil surface with size of 1 m × 1 m, the expected number of received free‐falling raindrops with different diameters per unit time was described by the combination of the raindrop size distribution function and the terminal velocity of raindrops. The total splash amount was seen as the sum of the impact amount by all raindrops in the rainfall event. The total splash amount per unit time was subdivided into three different components, including net splash amount, single impact amount and re‐detachment amount. The re‐detachment amount was obtained by a spatial geometric probability derived using the Poisson function in which overlapped impacted areas were considered. The net splash amount was defined as the mass of soil particles collected outside the splash dish. It was estimated by another spatial geometric probability in which the average splashed distance related to the median grain size of soil and effects of other impacted soil particles and other free‐falling raindrops were considered. Splash experiments in artificial rainfall were carried out to validate the availability and accuracy of the model. Our simulated results suggested that the net splash amount and re‐detachment amount were small parts of the total splash amount. Their proportions were 0·15% and 2·6%, respectively. The comparison of simulated data with measured data showed that this model could be applied to simulate the soil‐splash process successfully and needed information of the rainfall intensity and original soil properties including initial bulk intensity, water content, median grain size and some empirical constants related to the soil surface shear strength, the raindrop size distribution function and the average splashed distance. Copyright © 2007 John Wiley & Sons, Ltd.     

Wind effects on sediment transport by raindrop‐impacted shallow flow: a wind‐tunnel study

In wind‐driven rains, wind velocity and direction are expected to affect not only energy input of rains but also shallow ?ow hydraulics by changing roughness induced by raindrop impacts with an angle on ?ow and the unidirectional splashes in the wind direction. A wind‐tunnel study under wind‐driven rains was conducted to determine the effects of horizontal wind velocity and direction on sediment transport by the raindrop‐impacted shallow ?ow. Windless rains and the rains driven by horizontal wind velocities of 6 m s^?1, 10 m s^?1, and 14 m s^?1 were applied to three agricultural soils packed into a 20 by 55 cm soil pan placed on both windward and leeward slopes of 7 per cent, 15 per cent, and 20 per cent. During each rainfall application, sediment and runoff samples were collected at 5‐min intervals at the bottom edge of the soil pan with wide‐mouth bottles and were determined gravimetrically. Based on the interrill erosion mechanics, kinetic energy ?ux (E_rn) as a rainfall parameter and product of unit discharge and slope in the form of q^bS^c_o as a ?ow parameter were used to explain the interactions between impact and ?ow parameters and sediment transport (q_s). The differential sediment transport rates occurred depending on the variation in raindrop trajectory and rain intensity with the wind velocity and direction. Flux of rain energy computed by combining the effects of wind on the velocity, frequency, and angle of raindrop impact reasonably explained the characteristics of wind‐driven rains and acceptably accounted for the differences in sediment delivery rates to the shallow ?ow transport (R₂ ≥ 0·78). Further analysis of the Pearson correlation coef?cients between E_rn and qS_o and q_s also showed that wind velocity and direction signi?cantly affected the hydraulics of the shallow ?ow. E_rn had a smaller correlation coef?cient with the q_s in windward slopes where not only reverse splashes but also reverse lateral raindrop stress with respect to the shallow ?ow direction occurred. However, E_rn was as much effective as qS_o in the sediment transport in the leeward slopes where advance splashes and advance lateral raindrop stress on the ?ow occurred. Copyright © 2004 John Wiley & Sons, Ltd.     

Water flux and sediment transport within a forested landscape: the role of connectivity,subsurface flow,and slope length scale on transport mechanism

The connectivity and upscaling of overland runoff and sediment transport are important issues in hillslope hydrology to identify water flux and sediment transport within landscape. These processes are highly variable in time and space with regard to their interactions with vegetation and soil surface conditions. The generation of overland runoff and its spatial connectivity were examined along a slope to determine the variations in the transport mechanism of runoff and soil particles by rain splash and overland runoff. Field experiments were conducted by erosion plots on a steep hillslope at lengths of 5, 10, and 15 m. The overland runoff connectivity and flow transport distance decreased with the slope length, while spatial variability of infiltration increased significantly with the slope length. Observation of subsurface flow revealed that surface soil and litter layer could have important role in water transport. However, the surface soil water content and water flux transport along the slope was highly variable for different storm events; the variability was related to the complexity of the system, mainly by way of the initial wetness conditions and infiltration characteristics. Only net rain‐splashed soil was measurable, but examination of the water flux, overland runoff and sediment transport connectivity, characteristics of sheetwash, and the variability in spatial infiltration indicated an increase in the contribution of the rain splash transport mechanism along the slope. Copyright © 2013 John Wiley & Sons, Ltd.     

Estimation of temporal variation in splash detachment in two Japanese cypress plantations of contrasting age

To elucidate splash erosion processes under natural rainfall conditions, temporal variations in splash detachment were observed using a piezoelectric saltation sensor (H11B; Sensit Co., Portland, ND, USA). Preliminary laboratory tests of Sensit suggested that they were suitable for field observations. Field observations were conducted between July and September 2006 in 21‐ and 36‐year‐old Japanese cypress (Chamaecyparis obtusa) plantations with mean stand heights of 9·2 m and 17·4 m, respectively. Splash detachment (in g m^?2) was measured seven times using splash cups, and raindrop kinetic energy (in J m^?2 mm^?1) in both stands was measured using laser drop‐sizing (LD) gauges. Sensit was installed to record saltation counts, which were converted to temporal data of splash detachment (splash rate; in g m^?2 10 min^?1) using the relationship between splash detachment and saltation counts. Surface runoff was monitored using runoff plots of 0·5 m width and 2·0 m length to obtain temporal data of flow depth (in millimeters). Both total splash detachment and raindrop kinetic energy were larger in the older stand. Increased splash rates per unit throughfall were found in both stands after rainless durations longer than approximately one day in both stands. However, a lower splash rate was found in the 21‐year stand after rainfall events. During extreme rainstorms, the 21‐year stand showed a low runoff rate and a decline in the splash rate, while the 36‐year stand showed a higher splash rate and increased flow depth. The piezoelectric sensor proved to be a useful means to elucidate splash erosion processes in field conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

Interrill soil erosion processes and their interaction on low slopes

Soil erosion by water is mostly the result of rainfall‐driven and runoff‐driven processes taking place simultaneously during a storm event. However, the effect of interaction between these two erosion processes has received limited attention. Most laboratory experiments indicate that the rate of erosion in a rain‐impacted flow is greater than for un‐impacted flows of similar depth and velocity; however, negative interaction between the two processes has also been reported. There is no provision for any such interaction in any of the current erosion models. This paper reports on the results of a number of exact experiments on three soil types carried out in the flume of Griffith University's large rainfall simulator to study interaction between rain and runoff processes. The results show that interaction is generally positive under approximately steady state condition and there is very limited sign of negative interaction reported by others. Results provide strong evidence that raindrops continuously peel fine sediment from larger stable aggregates. This mechanism could be the reason for positive interaction during simultaneous rainfall and flow driven erosion in well aggregated soils as a result of increased fine particles in the eroded sediment. Strong positive interaction between rain and runoff erosion also occurs for medium to large aggregates. This strongly suggests that mechanisms that are not well understood are operational. It is quite possible that particle movement can be stimulated by rolling or creeping in a size‐selective manner. Indeed, such additional mechanisms may well be largely responsible for the positive interaction observed between rain and surface flow. Copyright © 2006 John Wiley & Sons, Ltd.     

Particle travel distances and bed and sediment compositions associated with rain‐impacted flows

Laboratory experiments were performed with rain of uniform drop size (2·7 mm, 5·1 mm) impacting flows over non‐cohesive beds of uniform sized sand (0·11–0·9 mm) and coal (0·2–0·9 mm) particles with flow velocities (20 mm s^?1, 40 mm s^?1) that were insufficient for the flow to entrain the particles without the aid of raindrop impact. Measurement of particle travel distance under rain made up of 2·7 mm drops confirmed a theoretical relationship between settling velocity and the distance particles travel after being disturbed by drop impact. Although, in theory, a relationship between settling velocity and particle travel distance exists, settling velocity by itself was unable to account for the effect of changes in both particle size and density on sediment discharge from beds of uniform non‐cohesive material. Particle density was also a factor. Further study of how particle characteristics influence sediment discharge will aid modelling of the impact of the soil in process‐based models of erosion by rain‐impacted flow. Copyright © 2001 John Wiley & Sons, Ltd.     

Interrill erosion on cultivated Greek soils: modelling sediment delivery

For interrill erosion, raindrop‐induced detachment and transport of sediment by rainfall‐disturbed sheet flow are the predominant processes, while detachment by sheet flow and transport by raindrop impact are negligible. In general, interrill subprocesses are inter‐actively affected by rainfall, soil and surface properties. The objective of this work was to study the relationships among interrill runoff and sediment loss and some selected para‐meters, for cultivated soils in central Greece, and also the development of a formula for predicting single storm sediment delivery. Runoff and soil loss measurement field experiments have been conducted for a 3·5‐year period, under natural storms. The soils studied were developed on Tertiary calcareous materials and Quaternary alluvial deposits and were textured from sandy loam to clay. The second group of soils showed greater susceptibility to sealing and erosion than the first group. Single storm sediment loss was mainly affected by rain and runoff erosivity, being significantly correlated with rain kinetic energy (r = 0·64***), its maximum 30‐minute intensity (r = 0·64***) and runoff amount (r = 0·56***). Runoff had the greatest correlation with rain kinetic energy (r = 0·64***). A complementary effect on soil loss was detected between rain kinetic energy and its maximum 30‐minute intensity. The same was true for rain kinetic energy and topsoil aggregate instability, on surface seal formation and thus on infiltration characteristics and overland flow rate. Empirical analysis showed that the following formula can be used for the successful prediction of sediment delivery (D_i): D_i = 0·638βEI₃₀tan(θ) (R² = 0·893***), where β is a topsoil aggregate instability index, E the rain kinetic energy, I₃₀ the maximum 30‐minute rain intensity and θ the slope angle. It describes soil erodibility using a topsoil aggregate instability index, which can be determined easily by a simple laboratory technique, and runoff through the product of this index and rain kinetic energy. Copyright © 2006 John Wiley & Sons, Ltd.     

The effect of soil type,meteorological forcing and slope gradient on the simulation of internal erosion processes at the local scale

Numerical simulation experiments of water erosion at the local scale (20 × 5 m) using a process‐based model [Plot Soil Erosion Model_2D (PSEM_2D)] were carried out to test the effects of various environmental factors (soil type, meteorological forcing and slope gradient) on the runoff and erosion response and to determine the dominant processes that control the sediment yield at various slope lengths. The selected environmental factors corresponded to conditions for which the model had been fully tested beforehand. The use of a Green and Ampt model for infiltration explained the dominant role played by rainfall intensity in the runoff response. Sediment yield at the outlet of the simulated area was correlated positively with rainfall intensity and slope gradient, but was less sensitive to soil type. The relationship between sediment yield (soil loss per unit area) and slope length was greatly influenced by all environmental factors, but there was a general tendency towards higher sediment yield when the slope was longer. Contribution of rainfall erosion to gross erosion was dominant for all surfaces with slope lengths ranging from 4 to 20 m. The highest sediment yields corresponded to cases where flow erosion was activated. An increase in slope gradient resulted in flow detachment starting upstream. Sediment exported at the outlet of the simulated area came predominantly from the zone located near the outlet. The microrelief helped in the development of a rill network that controlled both the ratio between rainfall and flow erosion and the relationship between sediment yield and slope length. Copyright © 2010 John Wiley & Sons, Ltd.     

Scale effects of Hortonian overland flow and rainfall‐runoff dynamics: laboratory validation of a process‐based model

Hortonian runoff was measured in the laboratory from uniform slopes of lengths of 1·5, 3·0, and 6·0 m for steady, high‐intensity rainstorms with durations of 1·0 to 7·5 min. A clear reduction in runoff per unit slope length was found as slope lengths were increased. This effect becomes more pronounced with decreasing storm duration. The runoff data were used to validate a simple process‐based model that combines the Philip‐two‐term infiltration equation with the kinematic wave overland flow principle. The predicted and experimental results agreed well. Laboratory findings were extrapolated with the aid of the model to slopes and rainfall durations similar to those found under West African conditions. The calculated reduction of runoff per unit length is similar to reported observations. Thus, this process‐based model can largely explain the phenomenon of runoff reduction with increasing slope length. Copyright © 2002 John Wiley & Sons, Ltd.     

A physically-based model of the dispersion of splash droplets ejected from a water drop impact

A model has been developed which predicts the dispersion of splash droplets produced by the impact of a water drop on a sloping soil surface. Experimental results of the ejection velocities and ejection angles of the splash droplets are generalized to a planar slope and the resulting splash distances are calculated taking into account the effects of air resistance. The predictions are presented in terms of the numbers of splash droplets from the impact point to surrounding squares arranged in a grid on the slope. The model explains many experimentally observed features of raindrop splash in terms of the mechanics of the processes involved and can make predictions of the effects of slope, wind, raindrop size, and soil properties on droplet dispersion. The component of the raindrop velocity parallel to the surface of the slope is identified as the main factor determining the degree and the direction of the asymmetry in the splash droplet dispersion. By combining the model with a theory of the entrapment of soil in the splash droplets it is possible to extend it to predict the dispersion of soil particles by raindrop impact, which is the basis of a model of soil erosion by rainsplash.     

Experimental study of extreme shear stress for shallow flow under simulated rainfall

The raindrop impact and overland flow are two major factors causing soil detachment and particle transportation. In this study, the turbulent characteristics of the shallow rain‐impacted water flow were investigated using a 2‐D fibre‐optic laser Doppler velocimetry (FLDV) and an artificial rainfall simulator. The fluctuating turbulent shear stress was computed using digital data processing techniques. The experimental data showed that the Reynolds shear stress follows a probability distribution with heavy tails. The tail probability increases with an increase of rainfall intensity or raindrop diameter, and it decreases with an increase of Reynolds number. A modified empirical equation was derived using both the raindrop diameter and rainfall intensity as independent variables to provide a better prediction of the Darcy‐Weisbach friction coefficient f under rainfall conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Field measurements of interrill erosion under ­different slopes and plot sizes

Despite numerous studies, the effect of slope on interrill erosion is not clearly established. Several interactions exist between erosion parameters that are not taken into account under experimental laboratory measurements and results need to be validated in the field. The influence of slope steepness (2 to 8 per cent) on soil loss for a crusted interrill area and the detachment and transport processes involved in the interaction between slope, rain characteristics and plot size were investigated. Sediment discharge and runoff rates were measured in bounded plots (1 m2 and 10 m2) under natural and simulated rainfall, allowing the analysis of a combination of detachment and transport processes at various scales in the field. Runoff rate increased from 20 to 90 per cent with increasing slope and rain intensity for both plot sizes, whereas sediment concentration increased from 2 to 6 g l−1 with increasing slope only for the 10 m2 plots. At the 1 m2 scale, erosion was transport‐limited due to the reduced rain‐impacted flow. Interactions between slope angle and rain intensity were observed for detachment and transport processes in interrill erosion. Results show the importance of an adapted experimental set‐up to get reference data for interrill erosion model development and validation. Copyright © 2000 John Wiley & Sons, Ltd.     

Applying the QREI30 index within the USLE modelling environment

The USLE/RUSLE model was designed to predict long‐term (~20 years) average annual soil loss by accounting for the effects of climate, soil, topography and crops. The USLE/RUSLE model operates mathematically in two steps. The first step involves the prediction of soil loss from the ‘unit’ plot, a bare fallow area 22.1 m long on a 9% slope gradient with cultivation up and down the slope. Appropriate values of the factors accounting for slope length, gradient, crops and crop management and soil conservation practice are then used to adjust that soil loss to predict soil loss from areas that have conditions that are different from the unit plot. Replacing EI₃₀, the USLE/RUSLE event erosivity index, by the product of the runoff ratio (Q_R) and EI₃₀, can enhance the capacity of the model to predict short‐term soil loss from the unit plot if appropriate data on runoff is available. Replacing the EI₃₀ index by another index has consequences on other factors in the model. The USLE/RUSLE soil erodibility factor cannot be used when the erosivity factor is based on Q_REI₃₀. Also, the USLE/RUSLE factors for slope length, slope gradient crops and crop management, and soil conservation practice cannot be used when runoff from other than the unit plot is used to calculate Q_R. Here, equations are provided to convert the USLE/RUSLE factors to values suitable for use when the erosivity factor is based on the Q_REI₃₀ index under these circumstances. At some geographic locations, non linear relationships exist between soil loss from bare fallow areas and the Q_REI₃₀ index. The effect of this on the slope length factor associated with the Q_REI₃₀ index is demonstrated using data from runoff and soil loss plots located at the Sparacia site, Sicily. Copyright © 2012 John Wiley & Sons, Ltd.     

Soil moisture states,lateral flow,and streamflow generation in a semi‐arid,snowmelt‐driven catchment

Hydraulic connectivity on hillslopes and the existence of preferred soil moisture states in a catchment have important controls on runoff generation. In this study we investigate the relationships between soil moisture patterns, lateral hillslope flow, and streamflow generation in a semi‐arid, snowmelt‐driven catchment. We identify five soil moisture conditions that occur during a year and present a conceptual model based on field studies and computer simulations of how streamflow is generated with respect to the soil moisture conditions. The five soil moisture conditions are (1) a summer dry period, (2) a transitional fall wetting period, (3) a winter wet, low‐flux period, (4) a spring wet, high‐flux period, and (5) a transitional late‐spring drying period. Transitions between the periods are driven by changes in the water balance between rain, snow, snowmelt and evapotranspiration. Low rates of water input to the soil during the winter allow dry soil regions to persist at the soil–bedrock interface, which act as barriers to lateral flow. Once the dry‐soil flow barriers are wetted, whole‐slope hydraulic connectivity is established, lateral flow can occur, and upland soils are in direct connection with the near‐stream soil moisture. This whole‐slope connectivity can alter near‐stream hydraulics and modify the delivery of water, pressure, and solutes to the stream. Copyright © 2005 John Wiley & Sons, Ltd.     

THE INFLUENCE OF RAINFALL ON TRANSPORT OF BEACH SAND BY WIND

This paper deals with the effect of rainfall on the process of wind erosion of beach sands and presents results from both field and wind tunnel experiments. Although sediment transport by splash is of secondary importance on coastal dunes, splash–saltation processes can move sediments in conditions where no motion is predicted by aeolian processes. The effect of raindrop impact on the movement of soil particles by wind was measured on a sand beach plain using an acoustic sediment sampler. In general, an increase of particle movement by wind at the sensor heights was observed during rainfall. Rainfall also affected the wind erosion process during and after rain by changing the cohesive conditions of the surface. The influence of the surface moisture content on the initiation of wind erosion and on the vertical distribution of transported sand particles was studied in a wind tunnel. Moisture significantly increased threshold wind velocities for the initiation of sediment transport and modified vertical sediment profiles.     

Impact of rainfall pattern on interrill erosion process

The impact of rainfall pattern on the interrill erosion process is not fully understood despite its importance. Systematic rainfall simulation experiments involving various rainfall intensities, stages, intensity sequences, and surface cover conditions were conducted in this study to investigate their effects on the interrill erosion process. Five rainfall patterns designed with the same total kinetic energy/precipitation (increasing, decreasing, rising–falling, falling–rising and constant patterns) were randomly delivered to a pre‐wet clay loam soil surface at a 10° slope gradient. Significant differences in soil losses were observed among the different rainfall patterns and stages, but there was no obvious difference in runoff. Kinetic energy flux (KE_r) was a governing factor for interrill erosion, and constant rainfall pattern (CST) produced nine times greater soil loss than runs with no KE_r. Varied‐intensity patterns had a profound effect on raindrop‐induced sediment transport processes; path analysis results indicated that said effect was complex, interactive and intensity‐dependent. Low hydraulic parameter thresholds further indicated that KE_r was the dominant factor in detaching soil particles, while overland flow mainly contributed to transporting the pre‐detached particles. This study not only sheds light on the mechanism of interrill sediment transport capacity and detachability, but also may provide a useful database for developing event‐based interrill erosion prediction models. Copyright © 2017 John Wiley & Sons, Ltd.