胶东半岛不同构造单元深部热流分流聚热模式

中生代、新生代时期地壳剧烈运动将胶东半岛划分为胶北隆起、胶莱凹陷、胶南-威海隆起三大构造单元,其中隆起山地区广泛分布花岗岩、变质岩,凹陷盆地区主要分布砂岩沉积地层,胶北隆起区与威海隆起区相对于胶莱凹陷盆地区具有更高的大地热流值.为系统分析胶东半岛大地热流值分布特征及其形成机理,本文在分析胶东半岛构造-热发展史、地热地质背景、地温场分布、岩石热导率、钻孔岩性与测温数据、地热流体化学成分等基础上,发现胶东半岛地热资源均为断裂构造控制类型的中低温对流型,其热源主要为三元聚热:导热断裂带水热对流、大地热流传导、地下水运移传导-对流;构造分布、岩石热物性、地热热储分布、地下水活动等是影响地温场分布的主要因素.针对胶东半岛地温场特征及其控制因素,提出了适合该地区的隆起-凹陷分流聚热模式与概念模型,即隆起山地区岩性以导热率、渗透率相对较高的侵入岩、变质岩为主,凹陷盆地区岩性以导热率、渗透率相对较低的砂岩为主,低导热率、低渗透率的凹陷区底部更像是一个相对隔热、隔水的顶板,使得来自地壳深部的大地热流及携带热量的流体、气体等在上涌的过程中在凹陷区的底部发生折射与再分配,从而导致热流在隆起山地区的底部形成一个温度相对更高的聚热区,反映在地表即是隆起山地区相对凹陷盆地区具有更高的大地热流值,特别隆起山地区轴部位置为热流值最高的区域,高热流值区域分布形态呈NE、NNE向分布,基本与胶东半岛NE、NNE向的深大断裂走向一致,该模式的提出可以更好地为胶东地区的地热资源勘探提供指导方向.     

Episodic folding inferred from syntectonic carbonate sedimentation: the Santaren anticline,Bahamas foreland

Sedimentation coeval with growth of the Santaren anticline provides an excellent opportunity to study the relationships between sedimentation and anticline uplift through time. The Santaren anticline is a kilometre-scale, NW–SE trending fold offshore of Cuba, in the Bahamas foreland of the Cuban fold and thrust belt. The growth strata associated with this anticline consist of a thick package of carbonate sediments that were deposited without major interruptions from Neogene (and perhaps before) to present day.The excellent seismic resolution and age control of a number of seismic horizons within the growth strata allowed us to define 25 growth beds, each of them representing between 0.1 and 3.2 Ma. An analysis of the thickness of these beds allowed us to determine accurate quantitative values of cumulative decompacted thickness and crestal structural relief at the time of their deposition. In addition, for the same periods, sedimentation and fold uplift rates were calculated. Moreover, some information on relationships between sedimentation and fold uplift rates was inferred from the growth stratal geometry. Growth beds that overlap the fold crest and thin over it indicate that sedimentation rates outpaced fold growth rates during their deposition. Some overlapping beds have constant thickness indicating that no fold uplift occurred during their sedimentation. The rest of the growth beds exhibit onlap/offlap geometries that do not indicate a unique sedimentation/fold uplift rate relationship. Only in those cases in which the geometry of the underlying bed at the end of its deposition is known is it possible to infer a specific sedimentation/fold uplift rate relationship.As a result of this analysis, we have been able to (1) illustrate that the geometry of the growth strata associated with the Santaren anticline results from competition between sedimentation and tectonic fold uplift, (2) document the episodic and non-steady nature of fold growth, and (3) show that short-term rates (at the scale of hundreds of thousands years) provide much insight into the interplay between sedimentation and tectonic fold uplift that control the growth stratal patterns.     

西秦岭南部白龙江隆起中三叠统光盖山组岩相及盆地分析意义

对西秦岭南部白龙江隆起南北两侧的中三叠统上部光盖山组岩相进行了研究,按照沉积作用方式识别划分出碎屑流、颗粒流、浊流、牵引流、平坦床砂静水5种沉积作用及岩相类型,并区分各种亚相类型.位于隆起北侧迭部飞仙剖面的岩相可识别出9个相序旋回,单个相序基本结构为砾质碎屑流相-鲍玛序列组合相,反映构造和沉积作用的旋回性和阶段性.总结发现,隆起南北两侧岩相的共同点是斜坡碎屑流和浊流型重力流较为发育,滑塌型重力作用少见,物源区较近且以灰岩为主;差别是不同剖面岩相结构、相序旋回有所不同,被侵蚀的物源地层时代不一样.进一步研究表明,光盖山组属于较缓的边坡沉积,是大陆碰撞阶段残留海盆大陆一侧的边缘相,盆地的形成与构造挠曲作用产生的沉降有关.鉴于洮河盆地晚古生代和早-中三叠世存在深海和残留洋盆,若尔盖盆地与之共用一个基底,因此,推测这2个盆地的中-上三叠统复理石之下可能没有台地相上古生界和中-下三叠统,不利于在该区开展油气勘探.      

Drainage diversions as evidence of propagating active faults: example of the El Asnam and Thenia faults, Algeria

Digital elevation models and aerial photographs provide evidence of past drainage diversions associated with known and inferred active faults in Northern Algeria. The El Asnam anticline is a fault-bend fold that is growing in response to displacement on the historically active El Asnam fault. The diversion of the Fodda River and a sequence of uplifted palaeovalleys across the anticline formed in response to the active southwestward propagation of the Sidi Ada–El Ardja segment of the El Asnam anticline. Deformation associated with the 1980 El Asnam earthquake (Ms 7.3) and its effect on drainage demonstrate the occurrence of coseismic uplift of the El Asnam anticline associated with slip on the underlying thrust fault. Similar geomorphic relations are observed between the Isser River and the Thenia fault. Diversions of the Isser River and evidence for Quaternary uplift indicate that the Thenia fault, which is close to Algiers, is tectonically active and should be considered to be a source of potentially damaging earthquakes.     

柴达木盆地三湖地区第四系构造发育历史及其勘探意义

地层厚度能够反映构造沉降及隆升。通过对柴达木盆地东部三湖地区探井统一分层后,计算现今地层厚度,然后分 期平面成图。这些图件揭示出三湖地区北斜坡背斜构造形成历史并不统一,具有由北东向南西依次发育的特征：伊克雅乌 汝、南陵丘、驼峰山背斜最早成型,是第四纪以来的同沉积背斜。k11沉积后,台吉乃尔和涩北二号才开始形成,接着涩北 一号形成,而台南背斜形成最晚。涩东鼻状构造是在k1以后才抬升的,而南斜坡至今未形成背斜构造;而且隆升速度也是 不均衡的,具有逐渐加强的趋势,尤其是更新统末期（k5以后）背斜构造快速抬升。该地区构造演化历史的确定,对于寻 找背斜构造形成的有利区带具有指导意义。     

库车坳陷东部晚白垩世古隆起及构造应力场恢复

库车坳陷东部具有丰富的油气资源,其构造变形机制与南天山造山带密切相关。综合采用露头共轭节理及白垩系残余厚度分布,分析了库车坳陷东部晚白垩世古隆起特征及构造应力场属性。吐格尔明、克孜勒努尔沟、库车河、卡普沙良河、吉迪克以及库车河西6条剖面的共轭节理分析表明,库车坳陷东部新生代构造挤压应力为NNW-SSE向,而中生代的构造挤压应力为NE-SW向。原型盆地恢复显示,库车坳陷白垩纪的沉积中心大致位于大北1井―吐北2井―克拉2井一线,且发育秋里塔格―新和―牙哈―提尔根古隆起带,白垩系原始沉积厚度总体上北厚南薄。在晚白垩世区域抬升剥蚀的构造背景下,坳陷东部受压隆升遭受剥蚀,白垩系残余厚度减薄,呈西厚东薄的趋势。位于坳陷东部的吐格尔明背斜在石炭纪―三叠纪为一个长期存在的继承性沉积古隆起,晚白垩世进一步隆升形成构造古隆起,背斜周缘的白垩系残余厚度进一步减薄。吐格尔明背斜和背斜周缘白垩系残余厚度等值线以及库北1井和库车河剖面周缘白垩系残余厚度等值线的长轴方向均为NW-SE向,进一步证实了库车坳陷东部晚白垩世的构造应力为NE-SW向。库车坳陷东部晚白垩世古隆起与构造应力场属性主要与特提斯造山带中地体增生和拼贴作用导致的特提斯北缘盆地群中发生的区域性抬升有关。     

斜向挤压叠加变形的构造解析 ——以四川威远地区为例

威远地区位于四川盆地西南部,其构造主体威远背斜属于大型穹隆状背斜构造,经历了多期构造运动的叠加变形,前人对威远背斜的形成过程与机制认识存在很大争议,无法满足油气精细勘探和高效开发的需要。本文通过地震资料的构造解析,确定威远背斜主体是在基底先存构造(NE向基底古隆起)的条件下,在燕山期近NS向斜向挤压作用过程中形成的,喜山期近EW向斜向挤压作用对其构造变形也有一定的贡献。按此认识设计了砂箱模拟实验,实验结果在平面和剖面上很好地再现了威远背斜的构造特征,表明了上述认识的合理性。这些认识不仅能为威远地区油气的勘探开发提供指导,还可以为相似区域的构造形成演化机制分析提供借鉴。     

The geosynclinal pair at the continental margin of Peru

The Andean geosynclinal pair in Peru consists of a eugeosynclinal marine andesitic volcanic trough and a miogeosynclinal sedimentary trough. Both troughs developed on a block-faulted basement of Precambrian crystalline rocks in which movement occurred along faults parallel to the continental margin. Subsidence in the eugeosyncline was most rapid during the Albian during which period about 7000 m of marine volcanics were deposited. In the miogeosyncline the greatest subsidence took place during the Tithonian but continued throughout the Cretaceous to accumulate a total thickness of about 6000 m. From the Late Cretaceous to the mid-Tertiary the Andean granitoid batholith was emplaced, mainly in the eugeosynclinal zone. A Benioff zone has been active at the continental margin from the Early Jurassic until the present so that the entire geotectonic cycle from the geosynclinal stage through to orogeny and uplift has taken place under a regime of active subduction.During the geosynclinal stage the sedimentary troughs developed in fault-bounded blocks which subsided under tension. It is possible to envisage crustal thinning within the subsident blocks by rotational movement on extensional faults or by plastic stretching of the lower crust. Stretching would be facilitated by the high geothermal gradient resulting from the emplacement of plutonics and volcanics and might be analogous to the formtion of marginal basins of western Pacific type. It is more difficult to account for the subsequent uplift for although the granites contributed to the crustal thickening, the main uplift did not occur in the granitic sector but further inland, and was moreover delayed for at least 20 m.y. after the last granites were emplaced.     

齐姆根-桑株河地区构造特征及演化

齐姆根-桑株河地区可划分出铁克力克断隆和塔西南坳陷两个二级构造单元,塔西南坳陷可进一步划分出齐姆根凸起、克孜勒塔克凹陷、叶城-和田凹陷、铁克力克北缘斜坡等4个三级构造单元.主要构造样式为逆冲推覆构造,有海西末与喜山晚期两次大规模逆冲推覆,沿推覆向可划分出根带、中带、前锋带及外缘带.与其相配套的是自南向北的高陡背斜带、中背斜带和低背斜带等3排背斜构造.克孜勒塔克凹陷与叶城-和田凹陷分界断裂为20号断裂,它是一条自古生代以来长期发展的区域性大断裂,控制了南北两侧沉积和构造发展.研究区经历了基底形成、克拉通边缘裂陷盆地、克拉通内挤压绕曲盆地、克拉通内坳陷盆地、前陆盆地及统一内陆盆地等6个发展演化阶段.     

Structural interpretation and hydrocarbon potential of Balkassar oil field,eastern Potwar,Pakistan, using seismic 2D data and petrophysical analysis

The Balkassar oil field is situated in the eastern Potwar sub-basin, lies on the southern flank of Soan syncline in Himalayan collisional regime. The area represents Indo-Pak and Eurasian blocks of Precambrian to recent time. Thrusting and folding of Himalayan, Indo-Pak plate movement and Salt Range uplift form the structural trap in Balkassar sub-surface (Balkassar anticline). On the basis of information from eleven seismic 2D lines and wells data six reflectors well data, four faults were identified and marked. The structural trend is northeast southwest. Interpretation of seismic 2D data reveals that the study area has undergone intense deformation as a consequence of development of thrusts and backthrusts.The Balkassar anticline is bounded by two thrust faults one from southeast and the other from northwest. Time and depth contour models shows that anticline limbs at north-western side are steep as compared to south-eastern limbs. Seismic interpretation indicates the presence of well-developed anticline bounded by three faults in the cover sequence and one fault in basement and thus the structure may act as a trap for hydrocarbons. The petrophysical analysis of Balkassar-OXY-1 well shows about 83.1% hydrocarbons saturation in the reservoir rocks, hence this study suggest that Balkassar Oilfield has potential to produce hydrocarbons.     

Effects of transient uplift/erosion on the surface heat flow and heat generation relationship in presence of small scale asthenospheric convection

In this paper the effect of transient uplift/erosion on the relationship between surface heat flow and heat generation for truncated exponential model of radiogenic heat source distribution and basal asthenospheric convection is investigated. Asthenospheric convection is described by a parameterized model, in the form of a nonlinear heat flux boundary condition involving basal temperature and mantle internal temperature. This boundary condition has been linearized and the analytical solution of the problem is obtained by the eigenvalue-eigenfunction expansion method. The analytical solution is used to derive the nature of surface heat flow and heat generation relationship. The results show that the linear relationship is maintained during the uplift/erosion and the estimates of the slope of the linear relationship are different from the depth scale of the exponential model and increase with the rate of uplift/erosion. The estimates of the reduced heat flow also increase with the rate of uplift/erosion. These results would find applications in the interpretation of linear surface heat flow and heat generation relationship which is observed in different tectonic environment.     

东营凹陷中央隆起带构造特征、沙箱模拟与形成机制研究

东营凹陷中央隆起带是渤海盆地济阳坳陷东营凹陷中油气最富集的区域。该构造带走向近东西,为北陡南缓两翼不对称的隆起带,上部发育"塌陷式"地堑断裂系统。由于构造受北缘断层控制,具有同沉积与逆牵引(reverse drag)特点,故勘探早期将其认为滚动背斜。20世纪80年代以来,由于钻井揭露与地球物理勘探资料的增多,研究者普遍认为是盐泥底辟构造。本次工作,是在进行详细的地震、地质解释基础上,结合前人研究成果与假设,运用沙箱实验证实方法探讨了构造带成因。通过实验与地质、地球物理的综合研究认为,东营凹陷中央隆起构造带是区域张扭力与重力联合导致的伸展-底辟作用的产物;盐泥底辟物质的形态、底辟与伸展作用的强度控制了局部构造的形态与断裂构造的发育程度。      

鄂西磷矿矿集区地质及其资源远景分析

鄂西磷矿的分布与产状受神农架背斜和黄陵背斜控制,为荆襄式晚震旦世沉积型磷块岩矿床。受浅海台地台坪亚相,磷块岩、泥(页)岩、白云岩含磷建造和水下隆起古构造等控制。晚震旦世陡山沱期磷矿评价标志为:上震旦统陡山沱阶;浅海台地台坪亚相;磷块岩、泥(页)岩、白云岩含磷建造;成矿地段陡山沱阶厚度一般小于200m,最佳150～50m;水下隆起带;磷块岩矿床一般分布在冰碛砾岩为0m的区域;含磷建造等深线一般小于1000m。评价结果表明,荆襄、宜昌、新华、神农架和保康磷矿区的深部及外围具有较好的资源远景,资源潜力大。     

渤海地温场特点的初步研究

渤海位于华北断块区的东部,是华北古生代地台之上发育起来的中、新代断陷盆地,是陆上埕宁隆起和辽河、黄骅及济阳三大拗陷的自然延伸地带。渤海海域的地热特点,一直为人们所关注。在研究渤海的形成和演化时,有人对渤中凹陷的地热状况作了推论;有人根据少量的地热资料认为渤海及其邻近地区是一个高热流异常区。我们根据渤海海域的地温数据,和近年对华北平原地温场的研究结果进行对比,着重对本区地壳浅部的地热状况进行分析和讨论,提出一些初步的看法。     

模糊数学在岩溶储层地热资源勘探风险评价中的应用——以重庆山地型岩溶热储为例

重庆市岩溶储层地热资源丰富,开发利用历史悠久,但地热资源勘探风险较大。本文利用模糊综合评价法建立了风险评价模型,该模型中包含了热储构造开启程度、热储构造部位、沟谷切割程度、物探效果、热储埋深、热储厚度、热储岩层倾角、热异常情况、热储层位9个风险因子,每个因子划分为风险小、风险中等、风险大3级,并对其进行量化处理。最后对全市23个高隆起背斜两翼46个相对独立的山地型高隆起岩溶地热田共79个地热单元进行了地热资源勘探风险模糊数学综合评判。结果表明,有18个单元为风险小,42个单元为风险中等,19个单元为风险大。风险小的地热田一般热储汇水面积较大、补给径流循环条件好、热储顶板埋深1000-1800 m、热储厚度≥300 m、热储岩层倾角25-40°、深部裂隙较发育;风险大的地热田热储汇水面积较小、补给径流循环条件差、热储顶板埋深≥2500 m、热储厚度〈200 m、热储岩倾角〈20°176;或≥40°176;、深部裂隙不发育;风险中等地热田的地质特征则介于二者之间。评价结果较好地反映出了重庆市岩溶热储地热资源勘探风险状况。     

Heat transport by groundwater flow during the Baikal rift evolution

A two-dimensional modelling study of sedimentation, fluid flow, and heat flow in the Baikal rift basin undergoing flank uplift and basin subsidence has been performed in order to understand the impact of these processes on the surface heat flow signal. Heat flow anomalies of different scales and magnitudes have been observed at the sediment surface of the lake Baikal basin, and the presence of a hydrothermal vent suggests that fluids play an important role in the regional distribution of heat flow. The BASIN-code applied for this study allows to simulate topographically and compaction-driven hydrodynamical fluid flow and coupled heat transfer.The flank uplift history provides the basis for a regional groundwater circulation towards the central basin area, with predicted Darcy velocities at present-day situation in the basement varying between 1 and 100 cm/year. Within the basin, the presence of aquifers and the pinch-out layering has a major control on the flow field, and compaction-driven flow velocities are strongly altered when combined with topography-driven flow. When velocities in the basement are larger than several centimeters per year, the regional fluid circulation is an effective mechanism of heat redistribution. Heat is brought from the flanks towards the basin area, with largest heat transported at a depth of 1–2 km at both sides. During the flank uplift, heat advection increases, with secondary variation related to the deposition of sedimentary layers. The heat flow is increased over the basin and reduced in the flanks, with a total heat output balance always positive. The extra heat output over the modelled transection is 2–10% of the initial heat output. The maximum computed heat fluxes are smaller than measured in the heat flow anomalies of the lake Baikal basin. Nevertheless, the model suggests that flow in the sedimentary basin combined with a topographically driven heat advection in the surrounding basement is a sufficient mechanism to account for the increased heat flow over the basin and the main features of the heat flow distribution.     

From paleostresses to paleoburial in fold-thrust belts: Preliminary results from calcite twin analysis in the Outer Albanides

This paper presents a new approach to constrain paleoburial and subsequent uplift by folding in fold-thrust belts, combining differential stress estimates from mechanically-induced calcite twins with the assumption that stress in the upper crust is in frictional equilibrium. Calcite twin data were collected from pre-folding veins in late Cretaceous limestones from the Ionian zone in Albania in order to (1) determine Paleogene-Neogene stresses associated with the development of the major vein sets in the frontal anticlines of the Outer Albanides and (2) estimate paleoburial of the Cretaceous reservoir rocks during pre-folding flexural subsidence of the foreland. The first vein set (set I) trends N140 (± 20) and the second set (set II) is oriented N060 (± 20). Calcite twinning analysis from set I veins reveals a pre-folding N030° extension likely related to foreland flexure; a later pre-folding, NE-directed compression (LPS) is identified either from one or from both vein sets in the samples from the Saranda anticline; this NE compression is instead recorded by twinning in set II veins from the Kremenara anticline during late stage fold tightening. This NE compression well agrees with independent microtectonic data, regional transport direction and contemporary stress. The differential stress values related to this NE compression are combined with the hypothesis of crustal frictional stress equilibrium to derive first-order estimates of paleoburial of the Cretaceous limestones just before they were uplifted by folding. The ~ 4 km paleoburial of these limestones estimated in the Saranda anticline is consistent with independent paleoburial estimates from stratigraphy, maturity rank of organic matter, paleotemperature/paleogeothermal gradients from fluid inclusions and predictions of kinematic modelling of the Albanian foreland. Our results therefore place reliable constraints on the amount and rate of vertical uplift of these Cretaceous limestones and yield a promising methodology for better constraining paleoburial and therefore erosion and uplift in fold-thrust belts.     

中国西北部含油气盆地的构造带类型及其复式油气藏(田)初探

中国西北部含油气盆地具有四大类型有利油气成藏构造带,包括前陆带、中央隆起带、凹陷背斜带和斜坡构造带。前陆带还可分为前陆隆起带、前陆逆冲断裂带及前陆逆冲前锋带三个亚类。这些构造带控制了油气藏的形成与聚集,构成了在垂向上相互叠置、平面上复合连片,形成不同的复式油气聚集区。前陆带主要分布在塔里木盆地西南缘和北缘、准噶尔盆地西北缘和南缘、吐哈盆地北缘、酒泉盆地南缘以及柴达木盆地北缘;中央隆起带仅在塔里木、准噶尔两个盆地发育;凹陷背斜带的典型实例为塔里木盆地英吉苏凹陷中部的英南构造带,另外还包括塔里木盆地满加尔凹陷哈德逊东河砂岩不整合超覆尖灭带和准噶尔盆地漠区坳陷的莫西断鼻等;斜坡构造带以柴达木盆地红柳泉斜坡构造带为代表,它由地层不整合圈闭和地层超覆圈闭形成复合构造样式。     

塔里木盆地塔北隆起英买2号背斜的成因机制与构造模型

英买力低凸起位于塔北隆起西部,是重要的含油气区域。英买2号背斜的研究与认识对于揭示区域构造演化及南部多个内幕型碳酸盐岩背斜的成因机制具有重要意义。本文运用断层相关褶皱原理及平衡剖面等方法,对英买2号背斜的地震剖面进行解释及复原。研究表明,英买2号背斜为固定翼长的滑脱褶皱,滑脱面位于中寒武统下部塑性层中,背斜演化经历了宽缓斜坡、起伏南倾、构造逆冲、稳定沉降掩埋和调整改造等5个阶段。背斜开始隆升时间为奥陶纪末期,地层缩短量为400～700 m,在海西末期隆升后遭受严重剥蚀,后期发育具传播性质的断层,伴有2期生长构造发育,背斜的前翼发生翼部旋转,发育生长三角,后翼有上超现象,体现了不同时期沉积速率的变化,也反映了后期构造活动的阶段性与持续性。     

TECTONIC EVOLUTION OF THE RUDNYY ALTAY DURING THE PALEOZOIC

Only the post-Ordovician history can be reconstructed for Rudnyy Altay and the adjacent South Altay and Kalba. Its distinctive feature is intensive Late Devonian - Early Carboniferous subsidence, followed by a general late Visean - early Namurian uplift. In the Silurian and Early Devonian it presented an anticlinal uplift, while Kalba and South Altay were subsiding. The Hercynian geosynclinal troughs of Rtidnyy Altay (Bystrushinsk and Beloubinsk) are geosynclines of the "second generation," a result of the breaking up of the Caledonian uplift. The terminal stage in Rudnyy Altay culminated in a Permian uplift. Each stage was accompanied by faulting and volcanism, the great Irtysh fault probably being the oldest. The authors believe that synclines and anticlines of Gornyy Altay were developed on the background of a vast magmatic hearth, with the lighter acid magmatic products moving toward the anticlines, by way of a dense network of faults. Basic material from deeper reaches ascended by way of deep rifts, to marginal parts of anticlinal uplifts. -- Scripta Technica, Inc.