新疆西天山莫托萨拉热水沉积型铁锰矿床矿物学与地球化学特征

莫托萨拉铁锰矿床位于西天山阿吾拉勒成矿带东端,研究程度相对薄弱,在矿床成因方面存在热水沉积、沉积-热液改造、胶体化学沉积等争论。本文详细研究了莫托萨拉最上层锰矿及其围岩的矿物组成、结构构造和地球化学特征,并综合前人资料对整个铁锰矿床的成因做了进一步探讨。本研究首次在矿区发现了热液长石岩,其主要由钠长石、钾长石以及少量重晶石、霓石、锌铁黄长石等矿物组成,类似于"白烟型"热水沉积岩。莫托萨拉最上层锰矿主要由锰橄榄石、褐锰矿、红硅锰矿、磁锰铁矿以及少量重晶石、方铁锰矿等矿物组成,发育有典型的热水内碎屑结构,指示其沉积于海底热液喷流口附近。该层锰矿的Al/(Al+Fe+Mn)值很低(0～0.02)、Si/Al值较高(7.9～10.9)、Fe/Ti值很高(428～1353),通过UCC标准化后发现明显富集Zn、Ba、Pb等元素,而Co、Ni、Cu等元素未见富集,以上地球化学特征与现代海底热液成因铁锰沉积物一致。在Fe/Ti-Al/(Al+Fe+Mn)、Si O2-Al2O3、10×(Co+Ni+Cu)-Fe-Mn、100×(Zr+Ce+Y)-15×(Cu+Ni)-(Fe+Mn)/4等判别图中,莫托萨拉的锰矿层和铁矿层样品均落在海底热液沉积区。锰矿层和铁矿层的稀土元素经PAAS标准化后具有明显的Ce负异常、Eu正异常和Y正异常,与现代海底热液成因铁锰沉积物的稀土配分模式非常相似。综合分析本次研究的矿物学、岩石学、地球化学特征以及前人资料,本文认为莫托萨拉铁锰矿床为海相热水沉积成因,成矿与同期海底火山的间歇性活动密切相关,海底热液的化学组分、温度高低和活动强弱都具有明显的脉动性。莫托萨拉矿区铁锰共存但各自独立成矿,且铁锰分离程度较高,这在显生宙沉积型锰矿中独具特色。鉴于前人曾报道莫托萨拉铁矿石中存在菌藻类微生物化石,我们推测,该矿床的铁锰分离过程除了受控于沉积环境的氧化还原条件变化外,微生物的选择性氧化沉淀可能也发挥了重要作用,值得开展深入研究。     

The Ashele Deposit: A Recently Discovered Volcanogenic Massive Sulfide Cu-Zn Deposit in Xinjiang, China

Abstract: The Ashele Cu-Zn deposit is a recently discovered volcanogenic massive sulfide deposit in Xinjiang, Northwestern China. It is the largest Cu-Zn deposit in this type of deposits in China, which were formed in the early period of later Palaeozoic Era. This deposit is hosted within a suit of bimodal submarine volcanic rocks of the Ashele Formation of Lower-Middle Devonian System formed in an environment of paleocontinental margin rift setting. Lensoid orebodies occur between spilitic rocks developed at footwall and quartz-keratophyric tuff at hanging wall. Zonation of metal elements in the Ashele mine is one of typical volcanic-related exhalative Cu-Zn sulfide deposits in the world. Black ores enriched in Pb, Zn and Ag occurs on the top of the No. 1 orebody in the Ashele deposit, yellow ores enriched in Cu in the middle part, and the chalcopyritization stringer below the massive sulfide ores. Zonation of ore-structure in the No. 1 orebody is also apparent and corresponds to the zoning of elements, i. e. lamellar and/or banded sulfide-sulfate ores on the top, massive sulfide ores in the middle, and stockwork veinlets associated with altered breccia pipe on the bottom. Four epochs of mineralization in the Ashele deposit has been recognized. The first period of syngenetic-exhalative deposition of sulfides is the main epoch of mineralization, and the ores deposited subsequently subjected to thermo-metamorphism at the second epoch, superimposed by hydrothermal mineralization at the third epoch, and weathered or oxidized at the fourth epoch.
More than 100 categories of minerals have been recognized in the Ashele mine, but only pyrite, chalcopyrite, sphalerite, tetrahedrite, galena, barite, quartz, chlorite, sericite, and calcite are dominant, making up various types of ores, and alteration pipes or horizons. Studies of ore petrology suggest that the massive ores were volcanogenic and deposited by exhalative process.     

贵州天柱大河边铅锌矿床的发现及其意义

大河边重晶石矿床是一个世界级的超大型重晶石矿床。最近在该区重晶石矿床下部的震旦系陡山沱组碳酸盐岩(白云岩)和碎屑岩中,新发现一套规模较大、层位产出稳定的铅锌矿化。铅锌矿体和重晶石矿床具有"上部为重晶矿,下部为铅锌硫化物矿床"的矿化特征。铅锌矿段矿石矿物主要为闪锌矿、黄铁矿及方铅矿,含少量白铁矿、黄铜矿及磁黄铁矿;脉石矿物主要为石英和重晶石,少量白云石、热液磷灰石、炭沥青及钡冰长石。成矿流体特征类似于形成沉积喷流型铅锌矿床的流体特征。铅锌矿化中的硫源自局限海盆内早寒武世海水经硫酸盐还原作用提供。此种类似于喷流沉积型铅锌矿床在南华裂谷盆地一带矿化层位稳定、分布范围较广泛,体现早寒武世时在裂谷盆地内存在一次大规模的热液事件。天柱大河边铅锌矿床的发现具有重要的资源意义及区内该种矿床的勘查意义。     

豫西嵩县上庄坪铅锌银矿床地球化学特征及地质意义

上庄坪铅锌银矿床是新一轮国土资源大调查中在北秦岭二郎坪群发现的硫化物矿床。笔者通过对矿床矿石、容矿同岩、重晶石岩的微量、稀土元素地球化学特征分析和地质特征研究,探讨成矿构造环境、成矿物质来源及矿床成因问题。研究表明.矿石和容矿围岩稀土元素球粒陨石标准化组成模式均为右倾型.矿石与围岩在Cu-Pb-Zn判别图解中投点区域一致.矿石Zn/(Zn Pb)与冲绳海槽和上向黑矿矿石特征相似、与TAG和EPR13°N区硫化物存在差异.矿石具较高As、Sb和Pb与低Cu、Cd和Se元素特征.认为该矿床成矿元素来源于壳幔混合、但以壳源为主的围岩变(石英)角斑岩和变细碧岩。矿石稀土元素、微量元素地球化学特征、矿床地质特征及与热水沉积重晶石岩和硅质岩的紧密共生关系说明,上庄坪矿床是弧后盆地构造环境海底热液喷流成岩成矿作用的产物。重晶石岩、硅质岩、矿床纵向和横向分带是寻找和勘探该类矿床的重要标志和依据。     

新疆阿尔泰阿舍勒矿集区铜多金属矿床模型

阿舍勒是新疆十分重要的铜多金属矿集区,矿化均赋存于下–中泥盆统阿舍勒组火山岩系中。矿化类型多,成矿元素组合复杂(Cu、Cu-Zn、Cu-Zn-Au、Cu-Pb-Zn-Au、Cu-Pb-Zn-Ag)。阿舍勒组火山活动时间是402~375 Ma,矿化时间为394~379 Ma,持续了15 Ma。本文通过对阿舍勒铜锌矿和萨尔朔克金多金属矿的系统研究,提出阿舍勒矿集区矿床模型,认为尽管矿集区铜多金属矿化类型多,成矿元素组合复杂,但成矿均与火山作用有关,属同一VMS成矿系统,只是不同部位存在矿化差异。在火山斜坡和洼地喷流沉积形成层状铜锌矿体和重晶石矿体,补给通道中形成脉状铜(锌)矿体和铜铅锌银矿体,潜流纹岩中形成脉状金铜铅锌矿体,潜英安岩中形成铜矿体,潜火山岩接触带形成铜矿体,在断裂或裂隙中形成铜矿体。     

Sulfur and lead isotope geochemistry of hypogene mineralization at the Barite Hill Gold Deposit, Carolina Slate Belt, southeastern United States: a window into and through regional metamorphism

The Barite Hill gold deposit, at the southwestern end of the Carolina slate belt in the southeastern United States, is one of four gold deposits in the region that have a combined yield of 110 metric tons of gold over the past 10 years. At Barite Hill, production has dominantly come from oxidized ores. Sulfur isotope data from hypogene portions of the Barite Hill gold deposit vary systematically with pyrite–barite associations and provide insights into both the pre-metamorphic Late Proterozoic hydrothermal and the Paleozoic regional metamorphic histories of the deposit. The δ³⁴S values of massive barite cluster tightly between 25.0 and 28.0‰, which closely match the published values for Late Proterozoic seawater and thus support a seafloor hydrothermal origin. The δ³⁴S values of massive sulfide range from 1.0 to 5.3‰ and fall within the range of values observed for modern and ancient seafloor hydrothermal sulfide deposits. In contrast, δ³⁴S values for finer-grained, intergrown pyrite (5.1–6.8‰) and barite (21.0–23.9‰) are higher and lower than their massive counterparts, respectively. Calculated sulfur isotope temperatures for the latter barite–pyrite pairs (Δ=15.9–17.1‰) range from 332–355 °C and probably reflect post-depositional equilibration at greenschist-facies regional metamorphic conditions. Thus, pyrite and barite occurring separately from one another provide pre-metamorphic information about the hydrothermal origin of the deposit, whereas pyrite and barite occurring together equilibrated to record the metamorphic conditions. Preliminary fluid inclusion data from sphalerite are consistent with a modified seawater source for the mineralizing fluids, but data from quartz and barite may reflect later metamorphic and (or) more recent meteoric water input. Lead isotope values from pyrites range for ²⁰⁶Pb/²⁰⁴Pb from 18.005–18.294, for ²⁰⁷Pb/²⁰⁴Pb from 15.567–15.645, and for ²⁰⁸Pb/²⁰⁴Pb from 37.555–38.015. The data indicate derivation of the ore leads from the country rocks, which themselves show evidence for contributions from relatively unradiogenic, mantle-like lead, and more evolved or crustal lead. Geological relationships, and stable and radiogenic isotopic data, suggest that the Barite Hill gold deposit formed on the Late Proterozoic seafloor through exhalative hydrothermal processes similar to those that were responsible for the massive sulfide deposits of the Kuroko district, Japan. On the basis of similarities with other gold-rich massive sulfide deposits and modern seafloor hydrothermal systems, the gold at Barite Hill was probably introduced as an integral part of the formation of the massive sulfide deposit. Received: 17 August 1998 / Accepted: 12 October 2000     

Genesis of the Zhaokalong Fe-Cu Polymetallic Deposit at Yushu, China:Evidence from Ore Geochemistry and Fluid Inclusions

The ore types of the Zhaokalong Fe-Cu deposit are divided into two categories: sulfide-type and oxide-type. The sulfide-type ore include siderite ore, galena-sphalerite ore and chalcopyrite ore, whereas the oxide-type ore include magnetite ore and hematite ore. The ore textures and structures indicate that the Zhaokalong deposit is of the sedimentary-exhalative mineralization type. Geochemical analyses show that the two ore types have a high As, Sb, Mn, Co and Ni content. The REE patterns reveal an enrichment of the LREE compared to the HREE. Isotopic analysis of siderite ore reveal that the δ13CPDB ranges from 2.01 to 3.34 (‰) whereas the δ18O SMOW ranges from 6.96 to 18.95 (‰). The fluid inclusion microthermometry results indicate that homogenization temperatures of fluid inclusions in quartz range from 131 to 181℃, with salinity values of 1.06 to 8.04 wt% NaCl eq. The mineralizing fluid therefore belongs to the low temperature - low salinity system, with a mineralizing solution of a CO2-Ca2+(Na+, K+)-SO42-(F-, Cl-)-H2O system. The geochemical results and fluid inclusion data provide additional evidence that the Zhaokalong deposit is a sedex-type deposit that experienced two stages of mineralization. The sulfide mineralization probably occurred first, during the sedimentary exhalative process, as exhibited by the abundance of marine materials associated with the sulfide ores, indicating a higher temperature and relatively deoxidized oceanic depositional environment. After the main exhalative stage, hydrothermal activity was superimposed to the sulfide mineralization. The later stage oxide mineralization occurred in a low temperature and relatively oxidized environment, in which magmatic fluid circulation was dominant.     

Geology,fluid inclusion and sulphur isotope characteristics of the El Cobre VHMS deposit,Southern Cuba

The El Cobre deposit is located in eastern Cuba within the volcanosedimentary sequence of the Sierra Maestra Paleogene arc. The deposit is hosted by tholeiitic basalts, andesites and tuffs and comprises thick stratiform barite and anhydrite bodies, three stratabound disseminated up to massive sulphide bodies produced by silicification and sulphidation of limestones or sulphates, an anhydrite stockwork and a siliceous stockwork, grading downwards to quartz veins. Sulphides are mainly pyrite, chalcopyrite and sphalerite; gold occurs in the stratabound ores. Fluid inclusions measured in sphalerite, quartz, anhydrite and calcite show salinities between 2.3 and 5.7 wt% NaCl eq. and homogenisation temperatures between 177 and 300°C. Sulphides from the stratabound mineralisation display δ ³⁴S values of 0‰ to +6.0‰, whilst those from the feeder zone lie between −1.4‰ and +7.3‰. Sulphides show an intra-grain sulphur isotope zonation of about 2‰; usually, δ ³⁴S values increase towards the rims. Sulphate sulphur has δ ³⁴S in the range of +17‰ to +21‰, except two samples with values of +5.9‰ and +7.7‰. Sulphur isotope data indicate that the thermochemical reduction of sulphate from a hydrothermal fluid of seawater origin was the main source of sulphide sulphur and that most of the sulphates precipitated by heating of seawater. The structure of the deposit, mineralogy, fluid inclusion and isotope data suggest that the deposit formed from seawater-derived fluids with probably minor supply of magmatic fluids.     

安徽霍邱BIF铁矿地球化学特征及其成矿意义：以班台子和周油坊矿床为例

安徽霍邱铁矿田位于华北克拉通南缘,是一个大型BIF铁矿田.本文对霍邱矿田班台子矿区和周油坊矿区的铁矿石及其赋存的岩石共28件样品进行了详细的主微量元素地球化学分析.分析结果表明,班台子矿区的片麻岩和角闪岩的原岩属于一套亚碱性系列的岩石,具有大离子亲石元素(LILE)富集,高场强元素(HFSE)明显亏损的火山弧岩石的特征.班台子角闪岩具有低的K2O含量和Ti/V值,Ti/V=22.7 ～ 25.9,平均24.5,与岛弧拉斑玄武岩一致.弧后盆地玄武岩化学组成具有类似岛孤拉斑玄武岩的特征.BIFs的形成往往需要构造稳定的半深水-深水盆地,孤后盆地能够为BIFs韵律条带的产生提供稳定的沉积环境,因此霍邱BIFs铁矿的大量出现说明班台子矿区角闪岩形成于弧后盆地,代表了霍邱铁矿形成的构造环境.班台子矿区铁矿石的(Eu/Eu*)SN=1.57 ～1.82,与Superior型(简称S型)BIFs特征一致;而周油坊矿区假象镜铁矿的(Eu/Eu*)SN=1.93 ～3.41,与Algoma型(简称A型)BIFs特征比较吻合.正Eu异常的强弱反应了成矿位置距离海底火山热液喷气口的远近.因此,我们推断霍邱地区BIFs型铁矿形成位置与海底火山热液喷气口的距离比较特别,处于A型向S型过渡的位置.角闪岩和片麻岩及其赋存的铁矿石的Al2O3和TiO2良好的线性相关性说明铁矿石铁质部分来源于侵蚀的弧后盆地玄武岩.Y/Ho比值=31.05 ～56.67,平均为46.65,说明霍邱铁矿继承了海水与热液的混合特征,其中,海水的贡献更大一些.周油坊矿区的大理岩主要化学组成CaO为28.49％ ～29.10％,MgO为20.25％ ～ 21.22％以及少量的SiO2(2.45％～6.10％).与平均显生宙石灰岩相比,周油坊大理岩亏损LILE和HFSE;与后太古代平均澳大利亚页岩(PAAS)相比,周油坊假象镜铁矿稀土元素总量低,明显正Eu异常,Ce无明显异常,Y/Ho比值介于35.00～56.67,平均48.81.这些特征显示大理岩及其赋存的假象镜铁矿形成于缺氧的海洋环境,海水中的氧能使亚铁离子氧化成三价铁离子沉淀出Fe(OH)3,但不足以使Ce3+氧化成Ce4+.     

长江中下游成矿带铜多金属矿床中灰泥丘的发现及其意义——以武山和冬瓜山铜矿为例

通过对长江中下游成矿带中武山铜矿和冬瓜山铜矿层状矿体的详细研究,发现了大量具有层圈状构造、层纹状构造或不规则同心环状构造的矿石。在前人研究基础上,经光薄片鉴定、扫描电镜观察和碳氧同位素分析等,认为这类矿石在宏观构造上显示出类似于灰泥丘的孔洞系统,微观上又发现了细菌等微生物结构,判断其属于一种矿化的灰泥丘。资料显示,灰泥丘和热水喷流沉积成矿作用关系密切,灰泥丘可视为热水喷流沉积成矿的证据之一。本文所研究的两个矿床中灰泥丘构造矿石保存状况略有不同,冬瓜山铜矿灰泥丘构造矿石保留了大量显示原生热水喷流沉积成因的组构、并发现细菌等微生物结构,碳氧同位素组成也显示原始沉积特征;而武山铜矿灰泥丘构造矿石则显示出强烈受热液改造的矿石组构和碳氧同位素组成特征,暂未发现细菌等微生物结构。冬瓜山和武山铜矿灰泥丘构造矿石的发现,有力地佐证了长江中下游成矿带在海西期曾发生过热水喷流沉积成矿作用。     

南秦岭古生代热水沉积盆地与热水沉积成矿

扬子地块北部被动边缘的南秦岭古生代沉积盆地中,发育一套自早古生代—中生代以来的碳酸盐岩夹细碎屑岩沉积建造,形成规模巨大独具特色的以铅锌金为主的多金属成矿带。伸展构造体制下形成的裂陷或断陷型盆地中,正常水成沉积与热水沉积同盆共存。正常水成沉积中叠加的热水沉积是一个"突发事件或灾变事件",具有特殊的物质组成和产态。通过对区内沉积成矿盆地的识别、分级,二级沉积盆地中边缘部位常发育多个三级构造热水沉积成矿盆地,它受控于沉积盆地中的同生断裂,具有沉积岩相、热水沉积岩组合、显著成矿作用及物化探异常广布的特点。三级构造热水沉积成矿盆地是矿床定位的构造空间,四级热水沉积洼地为矿体(矿层)的容纳空间。区内热水沉积岩主要为重晶石(毒重石)岩、硅质岩、钠长石岩和铁碳酸盐岩类,铅锌重晶石等矿产多产于热水沉积岩中或上盘。热水沉积形成一般由早期的热水喷发交代→主期热水喷流→晚期热水喷气演变。早期的热水喷发交代往往沿矿液喷发通道,形成网脉状、角砾状矿化;主期热水喷流主要形成多金属及热水喷流相,形成块状、条带状、层纹状矿石或热水沉积岩;晚期热水喷气主要形成浸染状矿石和热水喷气岩石。     

Geological characteristics and metallogenesis of iron deposits in western Tianshan,China

The western Tianshan metallogenic belt is one of the most significant polymetallic iron metallogenic belts in China. Important advances have been achieved recently in iron exploration in the Awulale Mountain in western Tianshan, China. These newly-discovered iron deposits are mainly hosted in the basic-medium andesitic lavas and volcaniclastics, often comprising a number of high-grade ores. Magnetite is predominated in ore mineral assemblages, and pyrite, chalcopyrite, pyrrhotite or sphalerite increase in certain deposits. Wallrock alterations are intensively developed, exemplified as sodic–calcic and potassic alterations which display in different patterns as country rocks and ore-controlled structures vary. Skarn assemblages are commonly developed in ore districts like Beizhan, Dunde and Chagangnuoer, and pyroxene + albite + K-feldspar − epidote + actinolite alterations are dominated around ore bodies in Zhibo deposit, whereas the Shikebutai deposit develops alteration assemblages comprising of jasper, barite, sericite, and chlorite. Thus, iron deposits can be divided into three types including volcanic-sedimentary type, volcanic magmatic-hydrothermal type and iron skarn type. Our preliminary interpretation about the tectonic background of this iron mineralization in this area is in the late stage of a collisional–accretional orogenic belt around Carboniferous, with some extrusional–extensional tectonic transition locally. Iron mineralization is likely to have a close genetic relationship with volcanic–subvolcanic activity, syn- or slightly post- the volcanism which took place besides continental arc. Volcanic eruption contributes to majority of mineralizing iron, with minor extracted from hydrothermal replacement from wall rocks.     

Gold Mineralization of the Gatsuurt Deposit in the North Khentei Gold Belt,Central Northern Mongolia

Mineral assemblages, chemical compositions of ore minerals, wall rock alteration and fluid inclusions of the Gatsuurt gold deposit in the North Khentei gold belt of Mongolia were investigated to characterize the gold mineralization, and to clarify the genetic processes of the ore minerals. The gold mineralization of the deposit occurs in separate Central and Main zones, and is characterized by three ore types: (i) low‐grade disseminated and stockwork ores; (ii) moderate‐grade quartz vein ores; and (iii) high‐grade silicified ores, with average Au contents of approximately 1, 3 and 5 g t^?1 Au, respectively. The Au‐rich quartz vein and silicified ore mineralization is surrounded by, or is included within, the disseminated and stockwork Au‐mineralization region. The main ore minerals are pyrite (pyrite‐I and pyrite‐II) and arsenopyrite (arsenopyrite‐I and arsenopyrite‐II). Moderate amounts of galena, tetrahedrite‐tennantite, sphalerite and chalcopyrite, and minor jamesonite, bournonite, boulangerite, geocronite, scheelite, geerite, native gold and zircon are associated. Abundances and grain sizes of the ore minerals are variable in ores with different host rocks. Small grains of native gold occur as fillings or at grain boundaries of pyrite, arsenopyrite, sphalerite, galena and tetrahedrite in the disseminated and stockwork ores and silicified ores, whereas visible native gold of variable size occurs in the quartz vein ores. The ore mineralization is associated with sericitic and siliceous alteration. The disseminated and stockwork mineralization is composed of four distinct stages characterized by crystallization of (i) pyrite‐I + arsenopyrite‐I, (ii) pyrite‐II + arsenopyrite‐II, (iii) galena + tetrahedrite + sphalerite + chalcopyrite + jamesonite + bournonite + scheelite, and iv) boulangerite + native gold, respectively. In the quartz vein ores, four crystallization stages are also recognized: (i) pyrite‐I, (ii) pyrite‐II + arsenopyrite + galena + Ag‐rich tetrahedrite‐tennantite + sphalerite + chalcopyrite + bournonite, (iii) geocronite + geerite + native gold, and (iv) native gold. Two mineralization stages in the silicified ores are characterized by (i) pyrite + arsenopyrite + tetrahedrite + chalcopyrite, and (ii) galena + sphalerite + native gold. Quartz in the disseminated and stockwork ores of the Main zone contains CO₂‐rich, halite‐bearing aqueous fluid inclusions with homogenization temperatures ranging from 194 to 327°C, whereas quartz in the disseminated and stockwork ores of the Central zone contains CO₂‐rich and aqueous fluid inclusions with homogenization temperatures ranging from 254 to 355°C. The textures of the ores, the mineral assemblages present, the mineralization sequences and the fluid inclusion data are consistent with orogenic classification for the Gatsuurt deposit.     

In-situ LA-ICP-MS trace elemental analyses of magnetite: The Bayan Obo Fe-REE-Nb deposit,North China

The Bayan Obo Fe-REE-Nb deposit in northern China is the world's largest light REE deposit, and also contains considerable amounts of iron and niobium metals. Although there are numerous studies on the REE mineralization, the origin of the Fe mineralization is not well known. Laser ablation (LA) ICP-MS is used to obtain trace elements of Fe oxides in order to better understand the process involved in the formation of magnetite and hematite associated with the formation of the giant REE deposit. There are banded, disseminated and massive Fe ores with variable amounts of magnetite and hematite at Bayan Obo. Magnetite and hematite from the same ores show similar REE patterns and have similar Mg, Ti, V, Mn, Co, Ni, Zn, Ga, Sn, and Ba contents, indicating a similar origin. Magnetite grains from the banded ores have Al + Mn and Ti + V contents similar to those of banded iron formations (BIF), whereas those from the disseminated and massive ores have Al + Mn and Ti + V contents similar to those of skarn deposits and other types of magmatic-hydrothermal deposits. Magnetite grains from the banded ores with a major gangue mineral of barite have the highest REE contents and show slight moderate REE enrichment, whereas those from other types of ores show light REE enrichment, indicating two stages of REE mineralization associated with Fe mineralization. The Bayan Obo deposit had multiple sources for Fe and REEs. It is likely that sedimentary carbonates provided original REEs and were metasomatized by REE-rich hydrothermal fluids to form the giant REE deposit.     

Fluid inclusion and stable isotopic constraints on fluid sources and evolution of the Luojiahe Cu deposit in the southern margin of the North China Craton

The Luojiahe Cu deposit in the Zhongtiaoshan region is located in the southern margin of the North China Craton. The orebodies are hosted in the mafic volcanic-sedimentary sequences of the metamorphosed (greenschist-facies) Neoarchean Songjiashan Group. The Luojiahe Cu mineralization can be divided into the primary volcanogenic massive sulfide (VMS) mineralization stage (Stage I, banded or stockwork ores) and the subsequent metamorphic remobilization stage (Stage II, coarse-vein ores).Three types of quartz selected for fluid inclusion (FI) studies were collected from the Stage I banded (Q1) and stockwork (Q2) ores and Stage II coarse-vein (Q3) ores. Four types of FIs were identified: (1) liquid-rich FIs (L-type), (2) pure vapor and vapor-rich FIs (V-type), (3) daughter mineral-bearing FIs (S-type), and (4) CH₄-H₂O FIs (C-type). Systematical microthermometric and H-O isotopic studies show that the Stage I ore-forming fluids consist predominantly of high salinity evolved seawater (125–220 °C; 23.9–27.9 wt.% NaCl equiv.) and some magmatic-hydrothermal fluids (249–339 °C; 34.5–42.2 wt.% NaCl equiv.). The two fluid end-members are represented by the L-type FIs in Q1 and the S- and V-type FIs in Q2. The temperature- and salinity variation trends of the L-type FIs in Q1 indicate a mixing process between the hot evolved seawater and cold seawater at Stage I. Furthermore, the V- and S-type FI coexistence in Q2 and their microthermometric data suggest that fluid unmixing has occurred in original magmatic fluids at Stage I. In contrast, the Stage II ore-forming fluids consist of CH₄-rich metamorphic fluids (192–350 °C; 10.6–43.2 wt.% NaCl equiv.). Carbon isotopic analysis of the Stage II calcite (− 4.58 to − 10.83‰) and graphite (− 32.01 to − 39.16‰) in the ore-hosting chlorite schist indicates that the metamorphic ore-forming fluids had exchanged carbon isotope with graphite. The generation of CH₄ may have resulted from the interaction between H₂O (released by metamorphic devolatilization) and graphite. The continuous consumption of H₂O in the hydrothermal fluid system may have increased the fluid salinity and triggered fluid unmixing in the CH₄-NaCl-H₂O system. In addition, the VMS metallogenic environment is generally favorable for microbial communities. It is considered that the graphite at Luojiahe may have been derived from sedimentary organic matter formed in seafloor hydrothermal vent systems, as also supported by carbon isotopic data.We propose that at Stage I, the main mineralization may have been resulted from 1) fluid mixing of hot evolved seawater and cold seawater in the near-surface environment; and 2) fluid unmixing caused by the percolation of magmatic fluids into syn-volcanic faults, forming the stockwork ores. At Stage II, the interaction between H₂O and graphite may have resulted in the reduction of ore-forming fluids and Cu precipitation, and fluid unmixing in the CH₄-NaCl-H₂O system may have further promoted the Cu mineralization.     

Mineralogy and ore formation conditions of the Bugdaya Au-Bearing W-Mo porphyry deposit, Eastern Transbaikal Region, Russia

The Bugdaya Au-bearing W-Mo porphyry deposit, Eastern Transbaikal Region, Russia, is located in the central part of volcanic dome and hosted in the large Variscan granitic pluton. In its characteristics, this is a Climax-type deposit, or an Mo porphyry deposit of rhyolitic subclass. The enrichment in gold is related to the relatively widespread vein and veinlet gold-base-metal mineralization. More than 70 minerals (native metals, sulfides, sulfosalts, tellurides, oxides, molybdates, wolframates, carbonates, and sulfates) have been identified in stockwork and vein ores, including dzhalindite, greenockite, Mo-bearing stolzite, Ag and Au amalgams, stromeyerite, cervelleite, and berryite identified here for the first time. Four stages of mineral formation are recognized. The earliest preore stage in form of potassic alteration and intense silicification developed after emplacement of subvolcanic rhyolite (granite) porphyry stock. The stockwork and vein W-Mo mineralization of the quartz-molybdenite stage was the next. Sericite alteration, pyritization, and the subsequent quartz-sulfide veins and veinlets with native gold, base-metal sulfides, and various Ag-Cu-Pb-Bi-Sb sulfosalts of the gold-base-metal stage were formed after the rearrangement of regional pattern of tectonic deformation. The hydrothermal process was completed by argillic (kaolinite-smectite) assemblage of the postore stage. The fluid inclusion study (microthermometry and Raman spectroscopy) allowed us to establish that the stockwork W-Mo mineralization was formed at 550–380°C from both the highly concentrated Mg-Na chloride solution (brine) and the low-density gas with significant N2 and H2S contents. The Pb-Zn vein ore of the gold-base-metal stage enriched in Au, Ag, Bi, and other rare metals was deposited at 360–140°C from a homogeneous Na-K chloride (hydrocarbonate, sulfate) hydrothermal solution of medium salinity.     

Mineralogy and genesis of the trench tungsten-molybdenum deposit,mount mulgine,Western Australia

The Mount Mulgine Trench deposit is a large, low grade W-Mo resource in Archaean greenstone-granitoid terrain in the Yilgarn Block, Western Australia. The mineralization occupies a quartz vein stockwork zone in a sequence of altered meta-basalts and banded iron formations. The nearby Hill deposit is hosted by a quartzmuscovite greisen on the margin of the synkinematic Mulgine Granite. Fluid inclusion studies show mineralization of the Trench deposit formed over a wide range of temperatures (approximately 500° to 260°C) from a fluid dominated by CaCl₂. Scheelite is the dominant W mineral and fluid inclusion data indicate deposition at temperatures of about 420° to 360°C from a fluid containing about 16 wt% CaCl₂ equivalent. Field relationships and sulphur isotope studies indicate a magmatic hydrothermal origin related to the Mulgine Granite. Fractures formed during intrusion of the granite provided channels for fluid migration and sites for mineral deposition. Controlling factors on mineral deposition may have been the temperature gradient away from the cooling granite and an increase in a _Ca ² resulting from fluid/rock interaction.     

内蒙古赤峰市白音诺尔铅锌矿沉积喷流成因:地质和硫同位素证据

位于大兴安岭中段的内蒙古赤峰市白音诺尔铅锌矿产于二叠系黄岗梁组地层中,矿体分布受褶皱构造控制。矿体主要由层纹状、浸染状、块状构造矿石构成。矿区内矿化类型以层纹状、层状矿化为主,晚期为脉状矿化。矿床矿石硫化物硫同位素分析表明,早期矿化与晚期矿化具有不同的硫同位素特征：早期矿化硫化物的δ³⁴Ｓ值(平均-4.31‰)明显小于晚期矿化硫化物的δ³⁴Ｓ值(平均值为-1.83‰)。综合研究表明,白音诺尔铅锌矿是沉积喷流型铅锌矿床,受到燕山期岩浆热液活动叠加,主成矿期发生于二叠纪。     

Metallogeny of the Shilu Fe–Co–Cu deposit,Hainan Island,South China: Constraints from fluid inclusions and stable isotopes

The Shilu deposit is a world-class Fe–Co–Cu orebody located in the Changjiang area of the western part of Hainan Island, South China. The distribution of Fe, Co, and Cu orebodies is controlled by strata of the No. 6 Formation in the Shilu Group and the Beiyi synclinorium. Based on a petrological study of the host rocks and their alteration assemblages, and textural and structural features of the ores, four mineralization stages have been identified: (1) the sedimentary ore-forming period; (2) the metamorphic ore-forming period; (3) the hydrothermal mineralization comprising the skarn and quartz–sulfide stage; and (4) the supergene period. The fluid inclusions in sedimentary quartz and/or chert indicate low temperatures (ca. 160 °C) and low salinities from 0.7 to 3.1 wt.% NaCl_eq, which corresponds to densities of 0.77 to 0.93 g/cm³. CO₂-bearing or carbonic inclusions have been interpreted to result from regional metamorphism. Homogenization temperatures of fluid inclusions for the skarn stage have a wide range from 148 °C to 497 °C and the salinities of the fluid inclusions range from 1.2 to 22.3 wt.% NaCl_eq, which corresponds to densities from 0.56 to 0.94 g/cm³. Fluid inclusions of the quartz–sulfide stage yield homogenization temperatures of 151–356 °C and salinities from 0.9 to 8.1 wt.% NaCl_eq, which equates to fluid densities from 0.63 to 0.96 g/cm³.Sulfur isotopic compositions indicate that sulfur of the sedimentary anhydrite and Co-bearing pyrite, and the quartz–sulfide stage, was derived from seawater sulfate and thermochemical sulfate reduction of dissolved anhydrite at temperatures of 200 °C and 300 °C, respectively. H and O isotopic compositions of the skarn and quartz–sulfide stage demonstrate that the ore-forming fluids were largely derived from magmatic water, with minor inputs from metamorphic or meteoric water. The Shilu iron ore deposit has an exhalative sedimentary origin, but has been overprinted by regional deformation and metamorphism. The Shilu Co–Cu deposit has a hydrothermal origin and is temporally and genetically associated with Indosinian granitoid rocks.     

Geology,geochemistry and genesis of the Godar Sabz Mn deposit in the Baft region,Iran

The Godar Sabz Mn deposit is located in the Nain-Baft ophiolitic belt in the northeast margin of the Sanandaj-Sirjan zone, Iran. The Nain-Baft back-arc extensional basin resulted from the subduction of the oceanic crust of Neo-Tethys under the southern margin of the Iranian Plate in the Early Cretaceous and hosts several mineral deposits, including volcanogenic massive sulfide, chromite, and Mn deposits. The mineralization in the Godar Sabz Mn deposit occurred predominantly as stratabound, massive, banded, layered, and lenticular orebodies in radiolarian cherts within Baft ophiolitic complex. The main ore minerals are pyrolusite, braunite, with minor amounts of todorokite. The significant geochemical features of the Godar Sabz ores, such as the high MnO content (21.82–80.65 wt%, average = 64.91 wt%), high Mn/Fe (average = 278), Si/Al ratios (average = 92.6), high Ba contents (average = 4495.6 ppm), the low average contents of Cu (81.8 ppm), Ni (106.2 ppm), Co (29.4 ppm), LREE > HREE, and trace element discrimination diagrams indicate a hydrothermal-exhalative source for mineralization. Chondrite-normalized REE patterns of studied ores have negative Ce and slightly positive Eu anomalies, which are similar to hydrothermal Mn deposits. The REE patterns of Mn ores coincide with basaltic lavas, suggesting that the Mn-mineralization in the Godar Sabz deposit was genetically related to the leaching of basaltic lavas. The Godar Sabz Mn deposit has many similarities with the main characteristics of the hydrothermal exhalative Mn deposits, including tectonic setting, host rock type, the morphology of orebodies, ore textures, mineralogy, and chemical features of ores.