Subtidal occurrences of ladder-back ripples: their significance in palaeo-environmental reconstruction

Ladder-back ripples are common on modern intertidal flats and have been thought to be diagnostic of deposition in this environment. Recognition of superimposed, asymmetric ladder-back ripples in a subtidal back-barrier estuary and superimposed, symmetric ladder-back ripples in an embayed, shallow marine environment indicates that these features are not diagnostic of deposition in the intertidal zone only, but can occur in other depositional environments, produced by different mechanisms and on different scales. The presence of ladder-back ripples in the subtidal zones challenges aspects of a model used to determine the palaeotidal range of ancient tidal sequences.     

Sediment transport and bedforms in a carbonate tidal inlet; Lee Stocking Island, Exumas, Bahamas

An active oolitic sand wave was monitored for a period of 37 days in order to address the relationship between the direction and strength of tidal currents and the resultant geometry, and amount and direction of migration of bedforms in carbonate sands. The study area is situated in a tidal channel near Lee Stocking Island (Exumas, Bahamas) containing an estimated 5.5 to 6 × 10⁵ m³ of mobile oolitic sand. Tidal ranges within the inlet are microtidal and the maximum current velocity at the studied site is 0.6 m s^?1. At least 300–400 m³ of mostly oolitic sand are formed within, or brought into, the channel area every year. The tidal inlet is subdivided into an ocean-orientated segment, in which sand waves are shaped by both flood and ebb tides, and a platform-orientated segment, where sand waves are mainly shaped by flood tides. The studied sand wave lies on the platformward flood-tide dominated segment in a water depth of 3.5.4.5 m. During the 37 days of observation, the oolitic and bioclastic sand wave migrated 4 m in the direction of the dominant flood current. The increments of migration were directly related to the strength of the tide. During each tidal cycle, bedforms formed depending on the strength of the tidal current, tidal range and their location on the sand wave. During flood tides, a steep lee and a gentle stoss side formed and current ripples and small dunes developed on the crest of the sand wave, while the trough developed only ripples. The average lee slope of the sand wave is 24.2°, and therefore steeper than typical siliciclastic sand waves. During ebb tides, portions of the crest are eroded creating a convex upward ebb stoss side, covered with climbing cuspate and linguoid ripples and composite dunes. The area between the ebb-lee side and the trough is covered with fan systems, sinuous ripples and dunes. The migration of all bedforms deviated to a variable degree from the main current direction, reflecting complex flow patterns in the tidal inlet. Small bedforms displayed the largest deviation, migrating at an angle of up to 90° and more to the dominant current direction during spring tides.     

Tidal shelf sedimentation in the Neoproterozoic Chattisgarh succession of central India

The Neoproterozoic Kansapathar Sandstone of the Chattisgarh basin, a shallow marine shelf bar sequence, consists of mineralogically and texturally mature sandstones with subordinate siltstones, mudstones and conglomerates. The sediments were transported, reworked and deposited in subtidal environments by strong tidal currents of macrotidal regime as well as storms, and accumulated as discrete shoaling-upward features, separated from each other by muddy to low-energy sandy deposits. The sandbodies developed into shoaling up linear bars, often more than a kilometre in length, through accretion of thick cross-stratified units in transverse directions under the influence of ebb and flood tidal currents, as well as in longitudinal direction affected by southeasterly flowing along-shore currents. The aggrading upper surfaces of the bars experienced protracted reworking by strong oscillatory wave currents leading to extensive development of subaqueous 2D or 3D dunes mantled with lag pebble deposits at different points. With continued shoaling and progradation, the bars amalgamated into large sandstone sheets with the development of high energy beach deposits and coastal sand flats in the uppermost part of the sequence. The presence of rill marks, flat-topped ripples, wrinkle marks, desiccation cracks and adhesion warts point to intertidal conditions with intermittent exposure. The high energy sandstone bars overlie a thick mudstone-dominated shelf sequence across a sharp interface indicating rapid change in the sea-level, provenance, rate of sediment generation and sediment input, and circulation condition in the shelf. A quiet muddy shelf was replaced by a major sand-depositing environment with strong, open marine circulation. An interplay of tidal currents, oscillatory wave currents and storm currents generated a complex flow pattern that varied in time and space from bimodal-bipolar to strongly unimodal flows. Close parallelism of wave ripple crests, trend of linear bars and unidirectional flows suggest that the elongate bars were parallel to sub-parallel to the coastline, and were strongly influenced by along shore drift. The inferred coastline was broadly N-S. The large-scale structures in the bar sandstones, emplacement of vast amount of sand and migration of large bedforms under strong macrotidal currents collectively indicate that the Kansapathar shelf was intimately connected with an open ocean basin towards north-northwest.     

渤海湾西岸海岸带现代地质作用及影响因素分析

通过对渤海湾西岸粉砂淤泥质海岸带的现代地质作用调查与分析,阐述了渤海湾海岸带在现代地质作用下侵蚀和淤积并存的现状:目前潮间带上部在不断淤高,而潮下带则存在侵蚀,正处于淤蚀过渡期。遥感资料及沉积物粒度的进一步分析,认为渤海湾西岸现代地质作用的影响因素及海岸带淤积泥砂主要来自岸滩下部及浅海区的侵蚀作用。提出在海岸开发中注意防淤的同时,高度重视侵蚀作用可能对海岸带造成的危害。     

The dynamics of star dunes: an example from the Gran Desierto, Mexico

Observations of patterns of erosion and deposition and surface wind velocity and direction on a 40 m high star dune in the Gran Desierto sand sea indicate that interactions between dune form and airflow as winds change direction seasonally play a major role in the formation of this dune type. Such interactions lead to deposition of sand in the central parts of the dune, giving rise to its pyramidal shape, as well as to some extension of the linear arms. The major arms of the dune studied are oriented NE-SW, or transverse to summer SSE and winter NNW winds. An avalanche face up to 10 m high develops during the course of each season. Flow separation at the main crestline gives rise to a wide zone of lee side secondary flow which moves sand along the base of the avalanche face towards the central part of the dune, where it is deposited as wind ripples migrate into zones of locally reduced flow velocity. Reattachment of the separated flow occurs on the lower part of the N or S arms, parallel to the flow. Spring westerly winds move sand obliquely up the S and N arms of the dune and outwards on the E arm. Large scale flow separation and diversion are replaced by the development of strong helical eddies in the immediate lee of the main crestline which move sand along avalanche faces and into zones of lower flow velocity at the end of dune arms. Formation of star dunes in the Gran Desierto follows a sequence in which crescentic dunes migrating into areas of opposed winds first develop a reversing crestal ridge. Convergent leeside secondary flows are developed, which result in the formation of linear elements parallel to each major wind direction and the concentration of sand in the central part of the dune. Examples of star dunes at different stages of their development can be documented.     

Proterozoic aeolian quartz arenites from the Hornby Bay Group, Northwest Territories, Canada: Implications for Precambrian aeolian processes

The Hornby Bay Group is a Middle Proterozoic 2.5 km-thick succession of terrestrial siliciclastics overlain by marine siliciclastics and carbonates. A sequence of conglomeratic and arenaceous rocks at the base of the group contains more than 500 m of mature hematitic quartz arenite interpreted to have been deposited by migrating aeolian bedforms. Bedforms and facies patterns of modern aeolian deposits provided a basis for recognizing two sequences of aeolian arenite. Both sequences interfinger with alluvial—wadi fan conglomerates and arenites deposited by braided streams. Depositional processes, facies patterns and paleotopographic position of the arenites are consistent with modern sand sea dynamics.Distal aeolian facies in both sequences are composed of trough crossbed megasets deposited by climbing, sinuous-crested, transverse dunes. Megasets comprise a gradational assemblage of tabular to wedge-planar cosets formed by deflation/reactivation of dune lee slopes and migration of smaller superposed aeolian bedforms (small dunes and wind ripples). Megasets in the proximal facies are thinner, display composite internal stratification and have a tabular-planar geometry which suggests that they were formed by smaller, straight-crested transverse dunes. Most stratification within the crossbeds is inferred to have formed by the downwind climbing of aeolian ripples across the lee slopes of dunes.Remarkably few Precambrian aeolian deposits have been reported previously. This seems anomalous, because most Precambrian fluvial sediments appear to have been deposited by low sinuosity (braided) streams, the emergent parts of which are prime areas for aeolian deflation. Frequent floods and rapid lateral migration of Precambrian humid climate fluvial systems probably restricted aeolianite deposition to arid paleoclimates. Thus the apparent anomaly may reflect non-recognition and/or non-preservation of aeolianites and/or variations in some aspect of sand sea formation and migration unique to the Precambrian. Reconstruction of the Hornby Bay Group aeolianites using recently developed criteria for their recognition suggests that the latter reason did not exert a strong influence.     

Internal structure of subtidal sandwaves revealed by high-resolution seismic reflection

ABSTRACT
Bedforms of the Surtainville area, off the Cherbourg peninsula, include subtidal sandwaves, which are a good example of mega-structures associated with the strong tidal currents prevailing in the English Channel. A fine-scale study using a high-accuracy echo-sounder and side-scan sonar shows that some of these sandwaves have a crescentic shape and a strong asymmetry indicating a sand movement toward the north. The sandwaves range in height from about 3.5 m to 7.5 m, in width from 100 m to 500 m and in length from 70 m to 200 m; their internal structure, revealed by the simultaneous use of a high-resolution seismic source, is characterized by large 'foreset' beds dipping in the same direction as the lee sides of the sandwaves. Groups of foresets are limited by reactivation surfaces which we interpret as erosional surfaces created by subordinate tides. The presence of horizontal erosional reflectors inside the sandwaves and the truncation of the present-day profiles may reflect the effects of storms. The asymmetry of the tide in the area studied, shown by long-term current measurements, indicates that these sandwaves belong to classes III or IV of Allen's (1980a) classification; the observed structures correspond very well to the prediction of Allen's conceptual model, but we suggest that long term phenomena like equinox cyclicity, associated with storms, may be responsible for their origin rather than the neap-spring-neap tidal cycles responsible for the internal structure of intertidal bedforms.     

Transverse and linear dunes in an Upper Pleistocene marine sequence, Corinth Basin, Greece

A range of large-scale dunes of oolitic calcarenite composition are exposed in the Corinth Basin of central Greece. These transverse dunes and a very large linear dune (> 15 m high) lie within an Upper Pleistocene, transgressive marine sequence. Tidal flow, accelerated by constriction through a narrow, fault-bounded seaway, is interpreted to have generated the current velocities necessary to produce the dunes. Marine facies in the Upper Pleistocene sequence include beach to offshore conglomerates and sandstones with wave-modified sedimentary structures and herringbone cross-stratification. An offshore facies association comprises variably bioturbated siltstones and sandstones with a varied marine fauna that includes thermophile species such as scleractinian corals and Strombus bubonius. Oolitic sandstone facies also occur. Oolitic sands were apparently produced in shoal environments subject to tidal (and wave) action, and transported by dominant southerly currents over the southern part of the basin. Oolites accumulated in a linear dune 2.7 km long and 15–20 m high and in three-dimensional transverse dunes up to 10 m high having a variety of compound and simple internal geometries. The isolated, WSW-ENE-trending linear form exhibits angle of repose sedimentary dips (up to 35°) of avalanche sets on its SE flank and sets typically with dips of 15–20° to the NW. Internal high-angle discontinuities are developed in the SE-dipping lee face. It is proposed that a dominant north-to-south flow crossed over the crest obliquely, resulting in both net erosional and depositional processes on the lee flank. A subordinate (?tidal) current may have locally and or periodically crossed the dune crest in a westwards direction. A string of transverse dunes, which were located adjacent to a fault/marine terrace scarp, is interpreted to have originally coalesced to form the linear dune. The distribution of transverse and linear dunes together with the palaeogeographical reconstruction suggest that a marine connection periodically existed across the Corinth Isthmus during the Late Pleistocene due to a combination of active faulting and glacio-eustatic highstands of sea level.     

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.     

Using Multiple-Point Geostatistics for Tracer Test Modeling in a Clay-Drape Environment with Spatially Variable Conductivity and Sorption Coefficient

This study investigates the effect of fine-scale clay drapes on tracer transport. A tracer test was performed in a sandbar deposit consisting of cross-bedded sandy units intercalated with many fine-scale clay drapes. The heterogeneous spatial distribution of the clay drapes causes a spatially variable hydraulic conductivity and sorption coefficient. A fluorescent tracer (sodium naphthionate) was injected in two injection wells and ground water was sampled and analyzed from five pumping wells. To determine (1) whether the fine-scale clay drapes have a significant effect on the measured concentrations and (2) whether application of multiple-point geostatistics can improve interpretation of tracer tests in media with complex geological heterogeneity, this tracer test is analyzed with a local three-dimensional ground-water flow and transport model in which fine-scale sedimentary heterogeneity is modeled using multiple-point geostatistics. To reduce memory needs and calculation time for the multiple-point geostatistical simulation step, this study uses the technique of direct multiple-point geostatistical simulation of edge properties. Instead of simulating pixel values, model cell edge properties indicating the presence of irregularly shaped surfaces are simulated using multiple-point geostatistical simulations. Results of a sensitivity analysis show under which conditions clay drapes have a significant effect on the concentration distribution. Calibration of the model against measured concentrations from the tracer tests reduces the uncertainty on the clay-drape parameters. The calibrated model shows which features of the breakthrough curves can be attributed to the geological heterogeneity of the aquifer and which features are caused by other processes.     

Morphology, internal structure and mechanics of small longitudinal (seif) dunes in an aeolian horizon of the Proterozoic Dhandraul Quartzite, India

The excellently preserved metre-scale, linear bedforms in an aeolian horizon of the Proterozoic Dhandraul Quartzite, India, show oppositely dipping strata arranged in a zigzag pattern. The strata are dominantly of translatent type, deposited by along-crest migrating ripples preserved on the flanks of dunes. The bedforms thus may be interpreted in a morphodynamic sense as longitudinal (seif) dunes. In order to determine the regional palaeoflow pattern, the migration directions of ripples preserved at the top of sheet sandstones that are associated with the dune cross-strata and internally show subhorizontal translatent strata were measured. A directionally varying flow with a mean direction nearly parallel to the mean axial trend of the dunes is indicated. The kinematics of the dunes were thus largely the result of alternate operation of two oblique flow components, each of which was deflected at a dune crest into an along-crest flow on the downwind flank of the dune. The deflected flow formed along-crest migrating ripples, which in turn deposited climbing ripple strata. Alternate deposition on the two opposite flanks resulted in near vertical accretion of the dunes, as is indicated by the zigzag pattern of stratal arrangement.     

Stromatolitic associations and their palaeo-environmental significance: A re-appraisal of a lower proterozoic locality from the northern cape province,South Africa

A basal section of the Lower Proterozoic Transvaal Dolomite from the northern Cape has been re-examined. Numerous associations of stromatolites and other structures have been distinguished in it. Forms of domical stromatolite dominate the structures, but columns, and associations built around spheroidal forms, are also represented. This material accumulated in a telescoped range of environments through the intertidal to a high-energy agitated zone and out into the subtidal.Columnar forms and flat domes from the intertidal zone appear to be remarkably similar to features described from Hamelin Pool at Shark Bay, Western Australia. The subtidal elongate domes and mounds increase in size with depth to reach dimensions of 40 by 10 m, heights of 13 m and relief of 2.5 m. Minor structures on these subtidal forms reflect decreasing energy outwards; included within them are columnar forms in the shallow subtidal zone.It is suggested that deposition within an epeiric sea was away from a headland on a relatively steeply shelving floor affected by currents at right angles to the shore. There are indications that an arid to semi-arid climate existed at that time.     

冀西北铁岩类型与沉积环境

冀西北铁岩的结构和构造类似于碳酸盐岩,因此,借鉴于现代碳酸盐相模式与沉积环境,有可能恢复古代铁岩的沉积环境。本文对铁岩分类及其沉积环境进行了探讨。     

Catastrophic flooding of an aeolian dune field: Jurassic Entrada and Todilto Formations, Ghost Ranch, New Mexico, USA

Surveyed outcrops of the Middle Jurassic Entrada Sandstone at Ghost Ranch, New Mexico, show the unusual occurrence of preserved aeolian dune palaeotopography buried beneath subaqueous strata. The preserved dune remnants have relief up to 35 m, trend NNW, and show internal scalloped cross-strata dipping to the WSW, with small sets occurring as both topsets and bottomsets. Outcrop data are best satisfied in computer models by 50 m high, sinuous bedforms that migrated to the WSW, while the sinuosity migrated alongcrest to the NNW. Superimposed small dunes occurred upon the stoss slope, and at the basal lee of the main bedform where they migrated alongslope to the NNW. Remnant dune palaeotopography is buried by onlapping, subaqueous, largely structureless sandstones believed to be derived by mass wasting of the upper portions of the dunes and deposited as sediment-gravity flows that infilled between the dunes. Preservation of dune palaeotopography beneath mass-flow deposits, with no evidence for gradually rising water, argues that flooding of the Entrada dune field was geologically instantaneous. The thickness and lithology of the overlying Todilto Formation conform to slight remnant palaeotopography on the Entrada surface. The Todilto is a laminated limestone and thinnest over remnant dune crestal areas, but thickens and increases in gypsum content downslope until it abruptly yields to a gypsum mound positioned over a remnant interdune hollow. The Todilto laminations are interpreted as seasonal varves deposited below wave base in a density-stratified water body. The flooding event that gave rise to the controversial Todilto water body occurred during Entrada time, with Todilto deposition occurring within an already substantial water body.     

Ichnology and Depositional Environment of the Cambrian Nagaur Sandstone (Nagaur Group) Along the Dulmera Section,Bikaner-Nagaur Basin,Rajasthan

Abstract: The Lower Cambrian Nagaur Sandstone (Marwar Supergroup) has yielded trace fossils Treptichnus, Cruziana, serially repeated Rusophycus, Diplichnites, Monomorphichnus, Bergaueria, arthropod swimming traces and leap frogging marks of Cruziana ichnofacies. This ichnofossils assemblage is dominantly preserved in fine to medium grained red sandstone beds of the Mohra Member (Nagaur Sandstone). The presence of graded rip-up clasts, current ripples, dune cross-stratification with mud drapes and tidal bundles indicates a subtidal paleoenvironment for the deposition of Nagaur Sandstone Formation, which is corroborated by the Cruziana ichnofacies trace fossil assemblage.     

The morphodynamics and internal structure of intertidal fine-gravel dunes: Hills Flats,Severn Estuary,UK

In the macrotidal Severn estuary, UK, the dynamics of intertidal fine-gravel dunes were investigated. These dunes are migrating across a bedrock platform. Systematic observations were made of hydraulic climate, geometry, migration rates and internal sedimentary structures of the dunes. During spring tides, the ebb flow is dominant, dunes grow in height and have ebb orientated geometry with bedrock floors in the troughs. During neap tides, a weak flood flow may dominate. Dunes then are flood orientated or symmetrical. Neap dune heights decrease and the eroded sediment is stored in the dune troughs where the bedrock becomes blanketed by muddy gravel. During spring tides, instantaneous bed shear stresses reach 8 N m^− 2, sufficient to disrupt a 9 mm-gravel armour layer. However, a sustained bed shear stress of 4 N m^− 2 is required to initiate dune migration at which time the critical depth-mean velocity is 1 m s^− 1. Ebb and flood inequalities in the bed shear stress explain the changes in dune asymmetry and internal structures. During flood tides, the crests of the dunes reverse such that very mobile sedimentary ‘caps’ overlie a more stable dune ‘core’. Because ebb tides dominate, internal structures of the caps often are characterised by ebb orientated steep open-work foresets developed by strong tidal currents and some lower angle crossbeds deposited as weaker currents degrade foresets. The foresets forming the caps may be grouped into cosets (tidal bundles) and are separated from mud-infused cores of crossbeds that lie below, by reactivation and erosion surfaces blanketed by discontinuous mud drapes. The cores often exhibit distinctive muddy toe sets that define the spacing of tidal cosets.     

AIR AND SAND MOVEMENTS TO THE LEE OF DUNES1

The large and extensive transverse and barchane dunes of coastal South West Africa are strongly oriented under the influence of predominantly southerly winds. During periods of strong winds (40–50 miles/h) deposition occurs on the lee slope in three ways: (1) sand is blown over the crest of the dune and falls on the lee slope; (2) rapid deposition near the dune crest results in periodic slumps and slides down the lee slope; (3) eddy currents developed to the lee of the dune pick up sand from the surface downwind from the dune and transport it to the lee slope. The size and strength of the lee eddy is surprising. With winds in the 40–50 miles/h range frequent gusts lift fine sand from the downwind surface to a height of several feet. Less frequently sand is picked up from a low position on the lee slope and redeposited higher on the slope. The addition of material to the lee slope by the eddy is much less volumetrically than the contribution directly over the dune crest from the windward direction; however, with strong winds the removal and transportation of sand from the area downwind of the lee slope back to the lee slope appears to be important in the deflation of this surface. The width of the area influenced by the lee eddy during strong winds is about equal to the height of the dune. Observations in low dunes from 1 to 20 ft. high at Sapelo Island, Ga., U.S.A., confirm the presence of a well developed eddy to the lee of these dunes during strong and moderate winds (20–50 miles/h).     

荆襄地区陡山沱组磷块岩的类型、成因和沉积环境

本文根据野外调查和室内初步研究成果并结合有关地质资料,分析、讨论了荆襄陡山沱组含磷岩系的磷块岩类型、成因和沉积环境。通过分析可知,组成磷块岩的磷灰石有不同的形成方式;磷块岩沉积在海退旋回中粘土和硅质沉积向碳酸盐沉积的转变阶段;磷块岩矿床形成在陆缘海内与深水有联系的浅水地带。 矿区含磷岩系特征综合于图1。     

Tidal currents,bed sediments,and bedforms at the South Branch and the South Channel of the Changjiang (Yangtze) estuary,China: Implications for the ripple-dune transition

Measurements were made of tidal currents, bed sediment particle sizes, and bedform dimensions at the South Branch and the South Channel of the Changjiang estuary, China, during the dry season in 1997 and the flood season in 1998. The near bottom current speed and direction were measured by a mechanical current meter for 10 h in 1997. The near surface current speed and direction were measured by a Current Meter of Endeco/YSI Inc. 174 SSM for 14 h in 1997 and 1998. Nine bed sediment samples were taken and their particle sizes were analyzed with sieves and siphons. The bedforms were nautically detected by an echo sounder and a side scan sonar. Results show that the ebb tides had larger near-bottom and near-surface current speeds and longer durations than the flood tides, in which the former occurred during the flood season in 1998 and not in the dry season in 1997. The bed sediments were composed of coarse silts and very fine sands during the dry season but of fine sands during the flood season. Bedforms were dominated by ebb tidal currents, the height∶length ratios of dunes and lee face angles were low, and heights and lengths were larger during the flood season in 1998. The ebb and flood tidal currents, bed sediment sizes, and dune morphology were largely controlled by the seasonal runoff variations. A new tentative boundary might be proposed for natural dunes in very fine sand with the availability of additional field data in the future.