Research on the seismotectonics of the January 17, 1995 HanshinM7.2 earthquake

Based on the geological tectonics, aftershock activity, earthquake surface rupture and peak ground motion, the geometric and dynamic characteristics of seismogenic tectonics about the 1995 Hanshin earthquake are analysed. Nojima fault and Rokko fault have the same trending direction, but opposite dips. Their rising and falling plates are in symmetrically diagonal distribution. The two faults can be defined as thrust-strike slip faults and constitute a pivotal strike-slip fault. The earthquake just occurred at the pivot, which is the seismotectonics for the earthquake to develop and occur. The pivotal movement along a strike-slip fault often leads to the occurrence of large earthquakes, whose dynamic process can be demonstrated by the stress analysis on the torsion of a beam with rectangle section. The displacement of earthquake surface rupture, aftershock density and peak acceleration change in a certain range of epicentral distance just similar as the shear stress changes from the center to the sides in the rectangle section. The distribution characteristics of the heaviest damage areas are also discussed in the article from the aspects of special geological tectonics and seismotectonic condition. The result obtained from the article can be applied not only to realizing the potencial earthquake sources in middle-long time, but also to build reasonably the prediction model about earthquake hazard.     

Research on the seismotectonics of the Jan－uary 17，1995 Hanshin M7．2 earthquake

ＲｅｓｅａｒｃｈｏｎｔｈｅｓｅｉｓｍｏｔｅｃｔｏｎｉｃｓｏｆｔｈｅＪａｎ┐ｕａｒｙ１７，１９９５ＨａｎｓｈｉｎＭ７．２ｅａｒｔｈｑｕａｋｅＺＨＵ－ＪＵＮＨＡＮ１）（韩竹君），ＦＵ－ＨＵＲＥＮ２）（任伏虎），ＹｕｊｉｒｏＯｇａｗａ２）（小川雄二郎）ａ...     

Spatio-temporal variation and focal mechanism of the Wenchuan MS8.0 earthquake sequence

Based on abundant aftershock sequence data of the Wenchuan M_S8.0 earthquake on May 12, 2008, we studied the spatio-temporal variation process and segmentation rupture characteristic. Dense aftershocks distribute along Longmenshan central fault zone of NE direction and form a narrow strip with the length of 325 km and the depth between several and 40 km. The depth profile (section of NW direction) vertical to the strike of aftershock zone (NE direction) shows anisomerous wedgy distribution characteristic of aftershock concentrated regions; it is related to the force form of the Longmenshan nappe tectonic belt. The stronger aftershocks could be divided into northern segment and southern segment apparently and the focal depths of strong aftershocks in the 50 km area between northern segment and southern segment are shallower. It seems like 'to be going to rupture' segment. We also study focal mechanisms and segmentation of strong aftershocks. The principal compressive stress azimuth of aftershock area is WNW direction and the faulting types of aftershocks at southern and northern segment have the same proportion. Because aftershocks distribute on different secondary faults, their focal mechanisms present complex local tectonic stress field. The faulting of seven strong earthquakes on the Longmenshan central fault is mainly characterized by thrust with the component of right-lateral strike-slip. Meantime six strong aftershocks on the Longmenshan back-range fault and Qingchuan fault present strike-slip faulting. At last we discuss the complex segmentation rupture mechanism of the Wenchuan earthquake.     

玉树地震产生的位移场和应力场研究

根据2010年4月14日玉树7.1级地震的震源破裂模型及余震目录, 本文计算了玉树地震产生的位移场和库仑破裂应力。 计算结果表明, 玉树地震导致应力变化以破裂带为中心高达正负1000Pa变化, 沿近东西方向应力增加, 巴彦喀喇山主峰断裂、 清水河断裂、 杂孕—楚玛尔河断裂东南段、 称多—曲麻莱—五道梁断裂、 冶多断裂中段, 扎那曲—着晓断裂、 莫云—结多断裂、 杂多—上拉秀断裂西北段处于应力增强区, 冶多断裂中段、 杂多—上拉秀断裂应力增强尤为显著, 高达1000 Pa之多, 应力的增加有利于这些断裂活动性增强。 而沿破裂带方向的断层如甘孜—玉树—风火山断裂带及玉树南—风火山南麓断裂西北段应力减小, 对这些地区后续地震的发生有一定的抑制作用。     

龙门山断裂带的分段性特征——来自密集震源机制解的约束

龙门山断裂带沿倾向和走向具有明显的分带性和分段性特征,通常以4条主干断裂为界将龙门山断裂带自西向东分为5条构造带,但是对沿走向的分段性特征仍未达成共识.本文利用四川区域地震台网记录的汶川地震后近10年的波形数据,采用全波形反演获取了龙门山断裂带1495个M≥3的震源机制解.通过“滑动窗”扫描方法提取不同地震类型的数量沿龙门山断裂带走向的变化曲线,据此将龙门山断裂带的震源区划分为S1—S9段.根据反演的震源机制解,进一步采用阻尼线性反演技术求取龙门山断裂带高分辨率的构造应力场信息,从地震类型、断面结构和构造应力场等角度探讨龙门山断裂带的分段性特征.结果表明:(1)地震类型存在明显的分段性特征.其中S1的逆冲型地震比例最高,S8的走滑型地震比例最高,S9的正断型地震比例最高.汶川地震后龙门山断裂带可能存在差异性断层调整运动,且余震晚期沿断裂带走向普遍存在应力的补充和协调,芦山地震的发生可能还对S2造成了应力扰动.汶川主震附近及余震区远端经历了更长的震后调整过程,且余震区远端S9具有更复杂、强度更高的震后调整过程.(2)断面结构存在明显的分段性特征.断面结构揭示汶川主震附近和余震区远端的隐伏断裂,以及虎牙断裂南端参与了汶川余震活动.断面倾角与走滑分量具有较好的一致性,在具有明显逆冲分量的分段断面倾角主要分布在50°~70°,而在具有明显走滑分量的分段断面倾角基本在60°以上,且断面倾角增大与汶川余震带宽度收缩变窄相吻合.(3)龙门山断裂带的应力环境非常复杂.σ1方向的分段性差异导致了汶川—芦山地震空区的地壳撕裂和地幔物质上涌、汶川主震附近和余震区远端的隐伏断裂活动以及虎牙断裂南端大量的逆冲型地震.结合构造应力场与大地测量资料认为,龙门山的隆升主要是受构造应力场作用下的上地壳缩短增厚所致.     

2010年4月玉树M_S7.3地震序列的断层结构

利用双差定位方法对玉树地震序列2010年4月14日至10月31日间发生的ML≥1.0地震进行双差定位,得到1545个地震的重定位结果.综合分析地震双差定位结果和玉树地震序列中强地震震源机制解,发现玉树MS7.3地震发震构造由北西向和北东东向两条相交断层组成,主震发生在北西走向的甘孜—玉树断裂带上,5月29日的MS5.9余震序列发生在北东东走向的一条隐伏断裂上,两条断裂均接近直立.甘孜—玉树断裂是羌塘地块和巴彦喀拉地块的构造边界,由于羌塘地块和巴颜喀拉地块的差异运动使甘孜—玉树断裂强耦合段应力高度积累,在应变能超过岩石强度时破裂失稳发生了MS7.3地震.主震断层的左旋滑动导致北东东向断层的正应力减小,库伦应力增加,45天后触发了MS5.9余震序列的活动.     

2013年MS7.0芦山地震的动力学破裂过程及其影响因素

2013年4月20日在四川芦山发生了M S7.0地震,震源运动学反演结果给出了此次地震的破裂过程和同震滑动分布.为了更好地理解造成芦山地震破裂过程的力学原因,本文综合野外地质调查、余震定位、深地震反射剖面等结果,构建芦山地震铲型断层模型,以震源运动学反演结果为约束,将震源参数与震源附近的构造应力场结合,建立断层面上滑动量和牵引力的时空分布关系,通过试错法给定震源动力学计算参数模拟芦山地震破裂传播的可能情况,进而分析讨论不同动力学计算参数对芦山地震破裂过程和同震滑动分布的影响.结果显示,初始应力是决定断层是否发生错动的关键;临界滑动弱化位移D c对破裂滑动速率有着很大的影响;成核区半径和初始应力主要影响破裂成核的快慢;局部不均匀破裂强度主要影响破裂行为和断层最终滑动量分布.利用边界积分方程法可以有效计算芦山地震铲型断层模型的动力学破裂过程,再现此次地震的主要特征.通过探究动力学参数对破裂过程影响,可解释运动学反演结果所揭示的破裂特征的力学原因,对于深入了解地震震源过程的物理本质和预测未来可能发生的地震的主要特征有着重要的参考意义.     

Tectonic Features of the M_S8.0 Wenchuan Earthquake and Its Aftershocks

The M8.0 Wenchuan earthquake occurred on the Longmenshan fault zone. Based on field investigation of the surface rupture and focal mechanism study of the aftershocks, we discuss the geological relationship of the main, secondary and triggered ruptures. The main rupture is about 200km long and can be divided into the south part and the north part. The south part consists of two parallel fault zones characterized by reverse faulting, with several parallel secondary ruptures on the hanging wall of the main fault, and the north part is a single main fault zone characterized by lateral strike-slip and reverse faulting. Compared to a 300km long aftershock distribution, the surface rupture only occupies 200km, and the remaining 100km on the northeast of the main rupture was triggered by aftershocks. Study on the ruptures of this earthquake will be useful for studying the earthquake risk evolution on the Longmenshan fault system.     

2008年汶川地震的破裂模型及引起的余震活动分析

用两种发震构造的破裂位移分布模型对2008年汶川地震造成的区域主要断裂的库仑应力变化进行了模拟.通过对这两种破裂位移模型模拟结果的对比分析,表明破裂位移模型的逆冲兼右旋滑动的位移模式及南北两段分别有两个滑动量高值区这样的特点控制了区域库仑应力变化的总体分布特征.汶川地震的余震分布和计算结果还显示:所获得的区域主要断裂的...     

STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN

On October 17, 2014, a M_S6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo M_S6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with M_L ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature.     

断层横向构造在逆冲型地震破裂中的作用——以汶川地震小鱼洞断层为例

大地震破裂大多由横向构造(如阶区、弯曲和分叉)所分割的多个段落组成.2008年5·12汶川地震破裂沿北东走向上穿过了多个横向构造部位,特别在震中北东45 km的位置,小鱼洞断层、北川断层和彭灌断层三者之间呈现复杂的断裂切割相交关系.复杂断层几何结构对破裂的扩展是有抑制还是促进的作用？在相交的断裂段之间是否存在最优的破裂顺序？本文以库仑应力分析为手段,探讨在汶川同震破裂初始30 s内,破裂在多分支断裂中选择扩展路径时的可能应力相互作用.库仑应力分析显示:如果北川断层先发生破裂,其滑动对小鱼洞断层和彭灌断层均产生强烈负应力的抑制作用,而彭灌断层的滑动却反而对小鱼洞断层和北川断层浅部有强烈正应力的促进作用.因此,从准静态应力分析角度,彭灌断层先于北川断层发生破裂的可能性较大,这一破裂顺序与小鱼洞断层参与同震破裂过程的事实相符.此外,小鱼洞断层在链接北川和彭灌断层的同震位移中可能起到桥梁作用,但非静态应力的影响.横向构造在逆冲型地震破裂扩展过程中起到的牵引作用使得逆冲型地震破裂能够比走滑型地震跨越更宽的阶区.横向构造是逆冲断裂带内广泛发育的构成单元,因此在地震危险性分析的最大潜在震级测算中应该考虑其作用.     

2014年鲁甸6.5级地震成因、破裂特征和余震分布特征的库仑应力作用

根据2014年鲁甸M_S6.5地震的区域构造和余震共轭分布特征,本文首先计算了1733年小江断裂带北段M7.75地震,1850年则木河断裂带M7.5地震和1974年马边M_S7.1地震对鲁甸M_S6.5地震震源机制解两个节面的黏弹性库仑应力作用,结果显示NNW向发生主破裂的包谷垴-小河断裂受到这3次地震,尤其是1850年M7.5地震明显的库仑应力作用,我们认为则木河断裂的高速左旋走滑运动以及7级以上强震的重复发生对于包谷垴-小河断裂的强震孕育和断裂演化方面具有促进作用;然后分析了鲁甸6.5级地震的共轭破裂与余震分布特征,并分别计算了两个共轭破裂面单独破裂对另一破裂面的库仑应力作用,结果显示NEE向破裂促进NNW向破裂的发生,而NNW向破裂后则阻碍了NEE向破裂的进一步发展,最终发展成以NNW向破裂为主的共轭破裂事件;最后计算了共轭破裂产生的库仑应力变化对余震的影响,认为位于NEE向破裂面西侧的余震集中分布主要是由于应力触发作用而形成.     

2010年玉树MS7.1地震同震破裂、余震分布特征及其与构造的关系

针对2010年4月14日玉树发生M_S7.1地震,本文利用InSAR数据给出同震视线向位移确定出的发震断层空间展布,并以该同震位移为约束反演得到主震和最大余震的同震位错分布.结果表明,主震同震位错发生在东玉树断裂,最大余震同震位错发生在西玉树断裂东端;基于位错分布计算了同震库仑应力变化与西部余震集中区地震活动之间的关系,结果反映玉树主震后最为活跃的余震活动可能受控于近东西向的次级断层(走向约为85°),而非玉树主干断裂;玉树断裂带整体呈现为左旋走滑运动,但其具体断层运动形式表现出主干断裂典型走滑运动、走滑断裂间的拉张和逆冲性质的次级运动、次级断裂与主干断裂相互作用下更为复杂的多方向次级断层活动等等不同变形特征,而主震同震破裂与余震空间分布均与这些不同断层变形方式有着密切关系.     

新疆及周缘构造破裂特征及地震序列类型

横亘新疆境内的天山及其周边的西昆仑、阿尔金和阿尔泰是中国大陆著名的强构造运动区和地震活动带。在对新疆构造区应力环境、动力过程、断层运动变形特征和地震序列分析讨论的基础上,对新疆及其周缘主要构造区地震破裂方式和序列类型进行研究,得出如下结论:(1)西昆仑构造区受来自青藏块体和塔里木块体NS和NW向水平压应力和垂向力的作用,构造运动呈现出走滑与逆冲特征,震源破裂以走滑型为主,数量较少的逆断型地震主要分布在西昆仑帕米尔一侧的深震挤压区,正断型地震主要出现在西昆仑与阿尔金交汇的拉张盆地及附近。该区主余型地震占63%,6级以上地震序列也存在多震类型。(2)阿尔金断裂带位于西昆仑北缘断裂和北祁连断裂过渡带,受青藏块体向北和向西的推挤,断裂本身的左旋位移量通过两端逆冲挤压而转化,使得青藏高原北边界不断向外扩展。在此力源下,阿尔金断裂带震源破裂以走滑为主,也有少量的逆冲型地震。地震序列中主余型和孤立型地震占比相同(占44%)。(3)在印度板块和亚欧大陆碰撞效应影响下,天山地区产生近NNE向水平压应力,构造运动显现出带旋性特征的逆冲和走滑,震源破裂方式与之相吻合。而天山构造大跨度的空间展布、扩展形式的多样性和地震破裂的两重性,又影响到地震序列类型的多样性,使得主余型、孤立型和多震型地震在不同构造部位呈现优势分布。(4)阿尔泰的构造运动可能受到了来自印度板块与亚欧板块碰撞的远程效应和西伯利亚块体南向运动的双向影响,形成NNE和SW向水平挤压力,主要大型发震断裂做右旋剪扭错动,而一些深断裂则以逆冲运动为主。震源破裂呈现出走滑(占64%)和部分的逆冲(占27%),6级以上地震序列主要为主余型,5级左右地震则多为孤立型。     

山东及附近区域地震断层错动性质与地壳应力场特征

利用P、SH、SV波的初动及振幅比获得2001年4月至2012年8月山东及附近区域132次地震震源机制解,对该区域地震断层的错动性质及地壳应力场特征进行分析.结果表明,山东及附近区域地震断层错动的基本方向为北东向和北西向,错动方式以走向滑动为主,部分为斜向滑动.分区研究表明：聊考断裂带附近区域所受挤压作用相对较强,逆断型地震破裂较多;胶东半岛及北侧海域所受拉张作用略占优势,逆断型地震破裂较少;沂沭断裂带南部附近区域逆断型与正断型的地震破裂所占比例差别不大.     

东昆仑断裂带东端的构造转换与2017年九寨沟MS7.0地震孕震机制

2017年四川九寨沟M_S7.0地震是继2008年汶川M_S8.0地震和2013年芦山M_S7.0地震之后,青藏高原东缘在不到十年的时间内发生的第三个震级M_S7.0以上的强震.这次地震发生在东昆仑断裂带东端,作为青藏高原东北缘的一条大型左旋走滑断裂带,东昆仑断裂带与东端其它构造之间的转换关系仍不清楚,因区内地质构造和地形复杂,东昆仑断裂带东端的主要构造仍缺少深入的研究.本文在总结区域地震构造活动特征、历史地震和现代地震基础上,通过东昆仑断裂带东端已有的和最近开展的活动构造定量研究结果,并结合现今GPS变形场资料和2017年九寨沟M_S7.0地震灾害特征分析,发现东昆仑断裂带最东段塔藏断裂上的左旋走滑除了一小部分继续向东传播转移到文县断裂带上外,大部分转化为其南侧的龙日坝断裂带北段、岷江断裂和虎牙断裂上的近东西向地壳缩短,这可能是岷山隆起的构造机制,而2017年九寨沟M_S7.0地震正是左旋走滑的东昆仑断裂带在东端继续向东扩展的结果.     

兰州地区活动构造的基本特征

兰州地区发育了NWW向和NWW向2组主导性活动构造带。大致以河口为界，东部地区主要为NWW向的马衔山－兴隆山左旋逆走滑活动断裂系，其新活动明显，是区内的主要控震断裂，1125年兰州7级地震就发生在其中的马衔山北缘断裂带的西端。河口以西为拉脊山北缘断裂和庄浪河断裂等1组NWW向的弧形逆冲断褶带，变形方式以断裂扩展褶皱为主，其新活动可能导致了138年金城－陇西63／4级地震、1440年永登61／4级地震和1995年永登5.8级地震的发生。兰州市区所在的兰州盆地则夹持在上述2组活动构造之间，其内同样发育了NWW向和NWW向的次级断裂，如刘家堡断裂、金城关断裂、雷坛河断裂及深沟桥断裂等，其上具有孕育和发生中强震的构造条件。     

STUDY ON SOURCE PARAMETERS OF THE 8 AUGUST 2017 M7.0 JIUZHAIGOU EARTHQUAKE AND ITS AFTERSHOCKS,NORTHERN SICHUAN

On August 8, 2017, a strong earthquake of M7.0 occurred in Jiuzhaigou County, Aba Prefecture, northern Sichuan. The earthquake occurred on a branch fault at the southern end of the eastern section of the East Kunlun fault zone. In the northwest of the aftershock area is the Maqu-Maqin seismic gap, which is in a locking state under high stress. Destructive earthquakes are frequent along the southeast direction of the aftershocks area. In Songpan-Pingwu area, only 50~80km away from the Jiuzhaigou earthquake, two M7.2 earthquakes and one M6.7 earthquake occurred from August 16 to 23, 1976. Therefore, the Jiuzhaigou earthquake was an earthquake that occurred at the transition part between the historical earthquake fracture gap and the neotectonic active area. Compared with other M7.0 earthquakes, there are few moderate-strong aftershocks following this Jiuzhaigou earthquake, and the maximum magnitude of aftershocks is much smaller than the main shock. There is no surface rupture zone discovered corresponding to the M7.0 earthquake. In order to understand the feature of source structure and the tectonic environment of the source region, we calculate the parameters of the initial earthquake catalogue by Loc3D based on the digital waveform data recorded by Sichuan seismic network and seismic phase data collected by the China Earthquake Networks Center. Smaller events in the sequence are relocated using double-difference algorithm; source mechanism solutions and centroid depths of 29 earthquakes with M_L≥3.4 are obtained by CAP method. Moreover, the source spectrum of 186 earthquakes with 2.0≤M_L≤5.5 is restored and the spatial distribution of source stress drop along faults is obtained. According to the relocations and focal mechanism results, the Jiuzhaigou M7.0 earthquake is a high-angle left-lateral strike-slip event. The earthquake sequence mainly extends along the NW-SE direction, with the dominant focal depth of 4~18km. There are few shallow earthquakes and few earthquakes with depth greater than 20km. The relocation results show that the distribution of aftershocks is bounded by the M7.0 main shock, which shows obvious segmental characteristics in space, and the aftershock area is divided into NW segment and SE segment. The NW segment is about 16km long and 12km wide, with scattered and less earthquakes, the dominant focal depth is 4~12km, the source stress drop is large, and the type of focal mechanism is complicated. The SE segment is about 20km long and 8km wide, with concentrated earthquakes, the dominant depth is 4~12km, most moderate-strong earthquakes occurred in the depth between 11~14km. Aftershock activity extends eastward from the start point of the M7.0 main earthquake. The middle-late-stage aftershocks are released intensively on this segment, most of them are strike-slip earthquakes. The stress drop of the aftershock sequence gradually decreases with time. Principal stress axis distribution also shows segmentation characteristics. On the NW segment, the dominant azimuth of P axis is about 91.39°, the average elevation angle is about 20.80°, the dominant azimuth of T axis is NE-SW, and the average elevation angle is about 58.44°. On the SE segment, the dominant azimuth of P axis is about 103.66°, the average elevation angle is about 19.03°, the dominant azimuth of T axis is NNE-SSW, and the average elevation angle is about 15.44°. According to the fault profile inferred from the focal mechanism solution, the main controlling structure in the source area is in NW-SE direction, which may be a concealed fault or the north extension of Huya Fault. The northwest end of the fault is limited to the horsetail structure at the east end of the East Kunlun Fault, and the SE extension requires clear seismic geological evidence. The dip angle of the NW segment of the seismogenic fault is about 65°, which may be a reverse fault striking NNW and dipping NE. According to the basic characteristics of inverse fault ruptures, the rupture often extends short along the strike, the rupture length is often disproportionate to the magnitude of the earthquake, and it is not easy to form a rupture zone on the surface. The dip angle of the SE segment of the seismogenic fault is about 82°, which may be a strike-slip fault that strikes NW and dips SW. The fault plane solution shows significant change on the north and south sides of the main earthquake, and turns gradually from compressional thrust to strike-slip movement, with a certain degree of rotation.     

2016年青海门源M_S 6.4地震特征与地质构造

2016年青海门源M_S 6.4地震具有显著特征,如:余震强度低、能量释放水平低、震害较轻等。震区地震构造表现出一定规律性,如:冷龙岭断裂呈周期性破裂,发震断裂含多支相互斜交的分支断裂等。虽然地震前小震活动未能提供有价值的预测信息,但震中落入2015年甘肃省年度危险区。本文对此次地震的震源机制解、地震序列衰减、震害特点及冷龙岭断裂带构造进行分析,给出地震序列属性、发震断层及错动动力源,提出地震并未发生在冷龙岭主断裂的证据,从而为震区及邻区地震活动状态与孕震机制判定提供参考,并为后续震情判定提供震例与数据。     

以形变观测为约束的芦山M_S7.0地震孕震机理数值模拟研究

本文以2013年4月20日芦山MS7.0地震前后在震中附近开展的形变观测研究结果为约束,利用震区天然地震成像、大地电磁测深、人工地震探测剖面、余震精确定位、震源破裂过程、地质考察、GPS观测、构造应力场等结果,建立了芦山地震震中及邻近地区的深浅部构造二维有限元数值模型,探讨了青藏高原向东挤出运动、区域地形特征、地壳内低速带和滑脱面、震区主要断裂带活动等可能因素对芦山地震孕育和破裂的控制作用.模拟结果显示,汶川地震后的青藏高原东部物质相对四川盆地运动速率增大是引发或加快芦山地震发生的主要动力学控制因素,龙门山断裂带西侧上中地壳内部低速带和滑脱面的存在是控制芦山地震震源位置的重要条件,其他因素则是控制龙门山断裂带长时间尺度区域构造活动的动力学因素;同时本文给出了主震破裂为复杂"y"型双破裂面的同震位移,模拟计算的地表垂直位移与观测结果一致,进一步支持了余震精确定位提出的主震为"y"型破裂面的推测.