FIRST RESULTS OF THE SUMER TELESCOPE AND SPECTROMETER ON SOHO – I. Spectra and Spectroradiometry

SUMER – the Solar Ultraviolet Measurements of the Emitted Radiation instrument on the Solar and Heliospheric Observatory (SOHO) – observed its first light on January 24, 1996, and subsequently obtained a detailed spectrum with detector B in the wavelength range from 660 to 1490 Å (in first order) inside and above the limb in the north polar coronal hole. Using detector A of the instrument, this range was later extended to 1610 Å. The second-order spectra of detectors A and B cover 330 to 805 Å and are superimposed on the first-order spectra. Many more features and areas of the Sun and their spectra have been observed since, including coronal holes, polar plumes and active regions. The atoms and ions emitting this radiation exist at temperatures below 2 × 10⁶ K and are thus ideally suited to investigate the solar transition region where the temperature increases from chromospheric to coronal values. SUMER can also be operated in a manner such that it makes images or spectroheliograms of different sizes in selected spectral lines. A detailed line profile with spectral resolution elements between 22 and 45 mÅ is produced for each line at each spatial location along the slit. From the line width, intensity and wavelength position we are able to deduce temperature, density, and velocity of the emitting atoms and ions for each emission line and spatial element in the spectroheliogram. Because of the high spectral resolution and low noise of SUMER, we have been able to detect faint lines not previously observed and, in addition, to determine their spectral profiles. SUMER has already recorded over 2000 extreme ultraviolet emission lines and many identifications have been made on the disk and in the corona.     

Multi-channel observations of plasma outflows and the associated small-scale magnetic field cancellations on the edges of an active region

With the SDO/AIA instrument, continuous and intermittent plasma outflows are observed on the boundaries of an active region along two distinct open coronal loops. By investigating the temporal sequence magnetograms obtained from HMI/SDO, it is found that a small-scale magnetic reconnection probably plays an important role in the generation of the plasma outflows in the coronal loops. It is found that the origin of the plasma outflows coincides with the locations of the small-scale magnetic fields with mixed polarities, which suggests that the plasma outflows along coronal loops probably results from the magnetic reconnection between the small-scale closed emerging loops and the large-scale open active region coronal loops.     

How Accurately Can We Determine the Coronal Heating Mechanism in the Large-Scale Solar Corona?

In recent papers by Priest et al., the nature of the coronal heating mechanism in the large-scale solar corona was considered. The authors compared observations of the temperature profile along large coronal loops with simple theoretical models and found that uniform heating along the loop gave the best fit to the observed data. This then led them to speculate that turbulent reconnection is a likely method to heat the large-scale solar corona. Here we reconsider their data and their suggestion about the nature of the coronal heating mechanism. Two distinct models are compared with the observations of temperature profiles. This is done to determine the most likely form of heating under different theoretical constraints. From this, more accurate judgments on the nature of the coronal heating mechanism are made. It is found that, due to the size of the error estimates in the observed temperatures, it is extremely difficult to distinguish between some of the different heat forms. In the initial comparison the limited range of observed temperatures (T>1.5 MK) in the data sets suggests that heat deposited in the upper portions of the loop, fits the data more accurately than heat deposited in the lower portions. However if a fuller model temperature range (T<1.0 MK) is used results in contridiction to this are found. In light of this several improvements are required from the observations in order to produce theoretically meaningful results. This gives serious bounds on the accuracy of the observations of the large-scale solar corona in future satellite missions such a Solar-B or Stereo.     

Width Variations along Coronal Loops Observed by TRACE

We have measured width variations along coronal loops observed by TRACE in the 171, 195, and 284 Å bandpasses. The loops are not significantly thicker in the middle compared to near the footpoints, and there is no correlation between the footpoint-to-midpoint expansion and the loop length. This applies to both post-flare and non-flare loops. The observations conflict with our present understanding of active region magnetic fields, and they have important implications for the structure and heating of the corona.     

The temperature-density structure of coronal loops in hydrostatic equilibrium

The temperature and density structure are computed for a comprehensive set of coronal loops that are in hydrostatic and thermal equilibrium. The effect of gravity is to produce significant deviations from the usual uniform-pressure scaling law (T(pL) ^1/3) when the loops are taller than a scale height. For thermally isolated loops it lowers the pressure throughout the loop, which in turn lowers the density significantly and also the temperature slightly; this modifies the above scaling law considerably. For more general loops, where the base conductive flux does not vanish, gravity lowers the summit pressure and so makes the radiation decrease by more than the heating. This in turn raises the temperature above its uniform pressure value for loops of moderate length but lowers it for longer loops. A divergence in loop cross-section increases the summit temperature by typically a factor of 2, and decreases the density, while an increase in loop height (for constant loop length) changes the temperature very little but can halve the density.One feature of the results is a lack of equilibrium when the loop pressure becomes too large. This may explain the presence of cool cores in loops which originally had temperatures below 2 × 10⁶ K. Loops hotter than 2 × 10⁶ K are not expected to develop cool cores because the pressure necessary to produce non-equilibrium is larger than observed.     

Determination of the temperature of the solar corona from the spectrum of the electron-scattering continuum

When the K-corona is formed by the scattering of photospheric radiation from free electrons, the Fraunhofer lines are greatly broadened by the thermal motions of the hot electrons. This paper discusses the possibility of measuring the coronal electron temperature from the residual depressions in the K-coronal spectrum. If the ratio of the intensities at 4100 Å and 3900 Å can be measured to an accuracy of ±1%, the coronal temperature can be inferred to an accuracy of ±0.2 MK. The temperature of a coronal inhomogeneity may also be measured by this method, provided the position angle is known.Now at Fraunhofer Institute, Freiburg, Germany.     

Morphology and spatial distribution of XUV and X-ray emissions in an active region observed from Skylab

We studied the morphology and spatial distribution of loops in an active region, using coordinated observations obtained with both the S082A XUV spectroheliograph and the S056 grazingincidence X-ray telescope on Skylab. The active region loops in the temperature range 5 × 10⁵ –3 × 10⁶ K fall basically into two distinctive groups: the hot loops with temperatures 2–3 × 10⁶ K as observed in coronal lines and X-rays, and the relatively cool loops with temperature 5 × 10⁵ –1 × 10⁶ K as observed in transition-zone lines (Ne vii, Mg ix). The brightest hot coronal loops in the active region are mostly low-lying, compact, closely-packed, and show greater stability than the transition-zone loops, which are fewer in number, large, and slender. The observed aspect ratio of the hot coronal loops is in the range of 0.1 and 0.2, which are almost two orders of magnitude larger than those for the Ne vii loops. Brief discussion of the MHD stability of the loops in terms of the aspect ratio is presented.     

FLOWS AND DYNAMICS IN THE CORONA OBSERVED WITH THE CORONAL DIAGNOSTIC SPECTROMETER (CDS)

EUV spectra obtained with the Coronal Diagnostic Spectrometer (CDS) on the Solar and Heliospheric Observatory (SOHO) show significant flows of plasma in active region loops, both at coronal and transition region temperatures. Wavelength shifts in the coronal lines Mgix 368 Å and Mgx 624 Å corresponding to upflows in the plasma reaching velocities of 50 km s^-1 have been observed in an active region. Smaller velocities are detected in the coronal lines Fexvi 360 Å and Sixii 520 Å. Flows reaching 100 km s^-1 are observed in spectral lines formed at transition region temperatures, i.e., Ov 629 Å and Oiii 599 Å, demonstrating that both the transition region and the corona are clearly dynamic in nature. Some high velocity events show even higher velocities with line profiles corresponding to a velocity dispersion of 300–400 km s^-1. Even in the quiet Sun there are velocity fluctuations of 20 km s^-1 in transition region lines. Velocities of the magnitude presented in this paper have never previously been observed in coronal lines except in explosive events and flares. Thus, the preliminary results from the CDS spectrometer promise to put constraints on existing models of the flows and energy balance in the solar atmosphere. The present results are compared to previous attempts to observe flows in the corona.     

Spatial and temporal variations of solar coronal loops

Skylab EUV observations of an active region near the solar limb were analyzed. Both cool (T < 10⁶ K) and hot (T > 10⁶ K) loops were observed in this region. For the hot loops the observed intensity variations were small, typically a few percent over a period of 30 min. The cool loops exhibited stronger variations, sometimes appearing and disappearing in 5 to 10 min. Most of the cool material observed in the loops appeared to be caused by the downward flow of coronal rain and by the upward ejection of chromospheric material in surges. The frequent EUV brightenings observed near the loop footpoints appear to have been produced by both in situ transient energy releases (e.g. subflares) and the infall/impact of coronal rain. The physical conditions in the loops (temperatures, densities, radiative and conducting cooling rates, cooling times) were determined. The mean energy required to balance the radiative and conductive cooling of the hot loops is approximately 3 × 10^–3 erg cm^–3 s^–1. One coronal heating mechanism that can account for the observed behavior of the EUV emission from McMath region 12634 is heating by the dissipation of fast mode MHD waves.     

Thermal equilibria of coronal magnetic arcades

A coronal magnetic arcade can be thought of as consisting of an assembly of coronal loops. By solving equations of thermal equilibrium along each loop and assuming a base temperature of 2 × 10⁴ K, the thermal structure of the arcade can be found. By assuming a form for the plasma pressure in the arcade, the possible thermal structures can be shown to depend on three parameters. Arcades can contain hot loops with summits hotter than 400 000 K, cool loops at temperatures less than 80 000 K along their lengths, hot-cool loops with cool summits and cool footpoints but hotter intermediate portions, and warm loops, cooler than 80 000 K along most of their lengths but with summits as hot as 400 000 K. For certain arcades, there exist regions where more than one kind of loop is possible. If the parameters describing the arcade are varied, it is possible for non-equilibrium to occur when a type of solution ceases to exist. For example, hot or warm loops can cease to exist so that only cool solutions are possible when the arcade size or pressure is decreased, while warm or cool loops may give way to hot-cool loops when the heating is reduced or the pressure is increased.     

Non-equilibrium ionization in coronal loops

The ionization conditions in coronal loops are investigated in the temperature range 2 × 10⁵–2 × 10⁶K, assuming velocity, density and temperature distributions computed for a siphon model of a pure hydrogen plasma. Use is made of the set of the carbon ions as an example of the general behaviour of the ions characteristic of that temperature range. It is found that the deviation from equilibrium ionization is large for subsonic-supersonic flow if the density is less than 5 × 10⁹cm^–-3, with the exception of the lower part of the first leg of very cool loops (T 2 × 10 K). With this exception cooler loops, given their larger density drop along the axis, show deviations from ionization equilibrium more easily than hotter ones, in spite of their lower flow velocity. We conclude that the possibility of a non-equilibrium state must be taken into account when deducing from measurements of line intensities the temperature of loops in which a flow may occur.Now at Institute for Plasma Research, Stanford University, as an E.S.A. Fellow.     

Flare parameters for the 7 September, 1973 two-ribbon flare

A study is made of the relative importance of the various energy loss mechanisms for the long-decay event of 7 September, 1973, using spectral scans in the 400 Å–1335 Å range. This spectral range contains many of the important electron density and temperature diagnostic line ratios for the solar transition zone. We refine earlier analyses of the flare energy budget using more detailed emission measure curves and density diagnostics. We examine the constant pressure assumptions used in both coronal loop models and in the interpretation of observations in terms of flare energetics. We find that much of the upper transition region emission originates in cooling loops. Radiative losses are found to dominate.     

Thermal equilibria of isobaric coronal magnetic arcades

A coronal magnetic arcade can be thought of as consisting of an assembly of coronal loops. By solving equations of isobaric thermal equilibrium along each loop and assuming a base temperature of 2 × 10⁴ K, the thermal structure of the arcade can be found. The possible thermal equilibria can be shown to depend on two parameters L ^* p ^* and h ^*/p ^* representing the ratios of cooling (radiation) to condu and heating to cooling, respectively. Arcades can contain four types of loops: hot loops with summits hotter than 400000 K; cool loops at temperatures less than 80000 K along their lengths; hot-cool loops with cool summits and cool footpoints but hotter intermediate portions; and warm loops, cooler than 80000 K along most of their lengths but with summits as hot as 400000 K. Two possibilities for coronal heating are considered, namely a heating that is independent of magnetic field and a heating that is proportional to the square of the local magnetic field. When the arcade is sheared the thermal structure of the arcade may change, leading in some cases to non-equilibrium or in other cases to the formation of a cool core.     

Propagation of the Slow Magnetoacoustic Waves in Coronal Loops Above Sunspots

The observations from the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) have revealed the weak dis- turbances (WDs) propagating in the fan-like coronal loops of the active region (AR 11092) at 171 ?A, 193 ?A, and 211 ?A. These WDs seem to be a common phenomenon in this part of the active region. The disturbances originate from the bright loop foot, and propagate along the loops. The observed propagation speed decreases with the increasing temperature, and varies between 40 km/s and 121 km/s, close to and less than the sound speed in coronal loops. Consid- ering the projection effect and the different angles of the loops with respect to the line of sight, this is exactly what the slow-wave model expects. The wavelet analysis shows that the periods of the WDs observed in different wavebands have no signi?cant difference, the two distinct periods, 3 min and more than 10 min, are all detected in the three EUV wavebands. Not only the coronal loops but also the sunspot region in the chromosphere exhibit intensity oscillations with a period of the order of 3 min. This result suggests that the sunspot oscillations can propagate into the corona through the chromosphere and transition region.     

Spectroscopic Studies of Solar Corona VII. Formation of a Coronal Loop by Evaporation

We obtained time-sequence spectroscopic observations in (Fe x) 6374 Å and (Fe xiv) 5303 Å lines successively with the 25-cm coronagraph, and narrow-band and Doppler images in 5303 Å line by the 2-D 10-cm Doppler coronagraph NOGIS at the Norikura Solar Observatory, of a coronal region for about 7 h on 9 19–20, 2001. The raster scans were obtained with a quasi-periodicity of about 14 min and NOGIS obtained the images with an interval of about 1 min. The coronal region observed showed the formation of a coronal loop by a high-speed surge in the 6374 Å line rising from one of the footpoints of the loop. Off the limb spectroscopic observations in the 6374 Å line showed large velocities along the line of sight and vertical to the solar limb at the time of formation of the loop. The 5303 Å line observations showed negligible line-of-sight velocities and low vertical velocities when compared to those in the 6374 Å line. A hump in the intensity plots in 5303 Å with height appears to move up with respect to the solar limb with an average velocity of 4km s^–1. The FWHM of the 6374 Å showed a much smaller value of about 0.7 Å near the foot point as compared to a value of 1.2 Å at larger heights at the beginning of observations. Later as the loop developed, the FWHM of 6374 Å line showed a gradual decrease along the loop up to 70 from the limb, reached a minimum value of about 0.5 Å and then increased with height during the formation of the loop; this trend lasted for about 2 h. About 3 h after the beginning of the formation of the loop, the FWHM of 6374 Å emission line showed normal values and normal rate of increase with height with some fluctuations. The FWHM of the 5303 Å line did not show such variations along the loop and showed normal decrease in FWHM with height found earlier (Singh et al., 2003a). These observations suggest that a relatively cooler plasma at a temperature of about 0.7 MK or less (corresponding to minimum value of FWHM of 0.5 Å) was ejected from the transition region with a large velocity of about 48km s^–1, heated up in the corona by some process and formed a coronal loop with a height of about 200 above the limb that had lifetime greater than 4 h. It appears that the plasma moved from one of the footpoints and the loop was formed by evaporation of chromospheric plasma. No large-scale brightening and H flare were observed in this region during the observational period of 7 h.On leave from Indian Institute of Astrophysics, Bangalore 560034, India.     

Thermal equilibria of coronal magnetic loops

Equations of thermal equilibrium along coronal loops with footpoint temperatures of 2 × 10⁴ K are solved. Three fundamentally different categories of solution are found, namely hot loops with summit temperatures above about 4 × 10⁵ K, cool loops which are cooler than 8 × 10⁴ K along their whole length and hot-cool loops which have summit temperatures around 2 × 10⁴ K but much hotter parts at intermediate points between the summit and the footpoints. Hot loops correspond to the hot corona of the Sun. The cool loops are of relevance for fibrils, for the cool cores observed by Foukal and also for active-region prominences where the magnetic field is directed mainly along the prominence. Quiescent prominences consist of many cool threads inclined to the prominence axis, and each thread may be modelled as a hot-cool loop. In addition, it is possible for warm loops at intermediate summit temperatures (8 × 10⁴K to 4 × 10⁵ K) to exist, but the observed differential emission measure suggests that most of the plasma in the solar atmosphere is in either the hot phase or the cool phase. Thermal catastrophe may occur when the length or pressure of a loop is so small that the hot solution ceases to exist and there are only cool loop solutions. Many loops can be superimposed to form a coronal arcade which contains loops of several different types.     

Siphon flows in coronal loops: I. Adiabatic flow

It is now known that the corona is filled with a multitude of loop-like structures. The likelihood of these loops being in static equilibrium is small and so this paper explores the possibility of steady isothermal or adiabatic flows, driven by a pressure difference between the loop feet. For a symmetric loop the flow becomes supersonic at the summit and is then retarded by a shock-wave at some point on the downflowing leg. The effect of adiabatic flow is to lower both pressure and temperature by at least a factor of two and so provide a possible explanation for the cool cores that are sometimes observed in coronal loops. Asymmetric loops, whose cross-sectional area increases or decreases in the flow direction, are found to possess a wide range of both subsonic and shocked flows. Converging loops have subsonic flows if the pressure difference between the footpoints is small, but shocked flows if the pressure difference is large enough. Diverging loops exhibit only shocked flows towards a low pressure footpoint, but can have either subsonic or shocked flow towards a high pressure footpoint. Flows in diverging loops can therefore be either accelerated or decelerated.     

The formation of flare loops by magnetic reconnection and chromospheric ablation

Slow-mode shocks produced by reconnection in the corona can provide the thermal energy necessary to sustain flare loops for many hours. These slow shocks have a complex structure because strong thermal conduction along field lines dissociates the shocks into conduction fronts and isothermal subshocks. Heat conducted along field lines mapping from the subshocks to the chromosphere ablates chromospheric plasma and thereby creates the hot flare loops and associated flare ribbons. Here we combine a non-coplanar compressible reconnection theory with simple scaling arguments for ablation and radiative cooling, and predict average properties of hot and cool flare loops as a function of the coronal vector magnetic field. For a coronal field strength of 100 G the temperature of the hot flare loops decreases from 1.2 × 10⁷ K to 4.0 × 10⁶ K as the component of the coronal magnetic field perpendicular to the plane of the loops increases from 0% to 86% of the total field. When the perpendicular component exceeds 86% of the total field or when the altitude of the reconnection site exceeds 10⁶km, flare loops no longer occur. Shock enhanced radiative cooling triggers the formation of cool H flare loops with predicted densities of 10¹³ cm^–3, and a small gap of 10³ km is predicted to exist between the footpoints of the cool flare loops and the inner edges of the flare ribbons.     

Magneto‐seismology of the solar atmosphere

Magnetohydrodynamic (MHD) waves in solar coronal loops, which were previously only predicted by theory have actually been detected with space‐borne instruments. These observations have given an important and novel tool to measure fundamental parameters in the magnetically embedded solar corona. This paper will illustrate how information about the magnetic and density structure along coronal loops can be determined by measuring the frequency or amplitude profiles of standing fast kink mode oscillations. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Short-Period Waves That Heat the Corona Detected at the 1999 Eclipse

As a part of a study of the cause of solar coronal heating, we searched for high-frequency (1 Hz) intensity oscillations in coronal loops in the [Fexiv] coronal green line. We summarize results from observations made at the 11 August 1999 total solar eclipse from Râmnicu-Vâlcea, Romania, through clear skies. We discuss the image reduction and analysis through two simultaneous series of coronal CCD images digitized at 10 Hz for a total time of about 140 s. One series of images was taken through a 3.6 Å filter isolating the 5303 Å[Fexiv] coronal green line and the other through a 100 Å filter in the nearby K-corona continuum. Previous observations, described in Pasachoff et al. (2000), showed no evidence for oscillations in the [Fexiv] green line at a level greater than 2% of coronal intensity. We describe several improvements made over the 1998 eclipse that led to increased image clarity and sensitivity. The corona was brighter in 1999 with the solar maximum, further improving the data. We use Fourier analysis to search in the [Fexiv] channel for intensity oscillations in loops at the base of the corona. Such oscillations in the 1-Hz range are predicted as a result of density fluctuations from the resonant absorption of MHD waves. The dissipation of a significant amount of mechanical energy from the photosphere into the corona through this mechanism could provide sufficient energy to heat the corona. A Monte Carlo model of the data suggests the presence of enhanced power, particularly in the 0.75–1.0 Hz range, and we conclude that MHD waves remain a viable method for coronal heating.