Non‐uniqueness with refraction inversion – a syncline model study

Non‐uniqueness occurs with the 1D parametrization of refraction traveltime graphs in the vertical dimension and with the 2D lateral resolution of individual layers in the horizontal dimension. The most common source of non‐uniqueness is the inversion algorithm used to generate the starting model. This study applies 1D, 1.5D and 2D inversion algorithms to traveltime data for a syncline (2D) model, in order to generate starting models for wave path eikonal traveltime tomography. The 1D tau‐p algorithm produced a tomogram with an anticline rather than a syncline and an artefact with a high seismic velocity. The 2D generalized reciprocal method generated tomograms that accurately reproduced the syncline, together with narrow regions at the thalweg with seismic velocities that are less than and greater than the true seismic velocities as well as the true values. It is concluded that 2D inversion algorithms, which explicitly identify forward and reverse traveltime data, are required to generate useful starting models in the near‐surface where irregular refractors are common. The most likely tomogram can be selected as either the simplest model or with a priori information, such as head wave amplitudes. The determination of vertical velocity functions within individual layers is also subject to non‐uniqueness. Depths computed with vertical velocity gradients, which are the default with many tomography programs, are generally 50% greater than those computed with constant velocities for the same traveltime data. The average vertical velocity provides a more accurate measure of depth estimates, where it can be derived. Non‐uniqueness is a fundamental reality with the inversion of all near‐surface seismic refraction data. Unless specific measures are taken to explicitly address non‐uniqueness, then the production of a single refraction tomogram, which fits the traveltime data to sufficient accuracy, does not necessarily demonstrate that the result is either ‘correct’ or the most probable.     

Sharp spatially constrained inversion with applications to transient electromagnetic data

Time‐domain electromagnetic data are conveniently inverted by using smoothly varying 1D models with fixed vertical discretization. The vertical smoothness of the obtained models stems from the application of Occam‐type regularization constraints, which are meant to address the ill‐posedness of the problem. An important side effect of such regularization, however, is that horizontal layer boundaries can no longer be accurately reproduced as the model is required to be smooth. This issue can be overcome by inverting for fewer layers with variable thicknesses; nevertheless, to decide on a particular and constant number of layers for the parameterization of a large survey inversion can be equally problematic. Here, we present a focusing regularization technique to obtain the best of both methodologies. The new focusing approach allows for accurate reconstruction of resistivity distributions using a fixed vertical discretization while preserving the capability to reproduce horizontal boundaries. The formulation is flexible and can be coupled with traditional lateral/spatial smoothness constraints in order to resolve interfaces in stratified soils with no additional hypothesis about the number of layers. The method relies on minimizing the number of layers of non‐vanishing resistivity gradient, instead of minimizing the norm of the model variation itself. This approach ensures that the results are consistent with the measured data while favouring, at the same time, the retrieval of horizontal abrupt changes. In addition, the focusing regularization can also be applied in the horizontal direction in order to promote the reconstruction of lateral boundaries such as faults. We present the theoretical framework of our regularization methodology and illustrate its capabilities by means of both synthetic and field data sets. We further demonstrate how the concept has been integrated in our existing spatially constrained inversion formalism and show its application to large‐scale time‐domain electromagnetic data inversions.     

P‐wave stacking‐velocity tomography for VTI media

A major complication caused by anisotropy in velocity analysis and imaging is the uncertainty in estimating the vertical velocity and depth scale of the model from surface data. For laterally homogeneous VTI (transversely isotropic with a vertical symmetry axis) media above the target reflector, P‐wave moveout has to be combined with other information (e.g. borehole data or converted waves) to build velocity models for depth imaging. The presence of lateral heterogeneity in the overburden creates the dependence of P‐wave reflection data on all three relevant parameters (the vertical velocity V_P0 and the Thomsen coefficients ε and δ) and, therefore, may help to determine the depth scale of the velocity field. Here, we propose a tomographic algorithm designed to invert NMO ellipses (obtained from azimuthally varying stacking velocities) and zero‐offset traveltimes of P‐waves for the parameters of homogeneous VTI layers separated by either plane dipping or curved interfaces. For plane non‐intersecting layer boundaries, the interval parameters cannot be recovered from P‐wave moveout in a unique way. Nonetheless, if the reflectors have sufficiently different azimuths, a priori knowledge of any single interval parameter makes it possible to reconstruct the whole model in depth. For example, the parameter estimation becomes unique if the subsurface layer is known to be isotropic. In the case of 2D inversion on the dip line of co‐orientated reflectors, it is necessary to specify one parameter (e.g. the vertical velocity) per layer. Despite the higher complexity of models with curved interfaces, the increased angle coverage of reflected rays helps to resolve the trade‐offs between the medium parameters. Singular value decomposition (SVD) shows that in the presence of sufficient interface curvature all parameters needed for anisotropic depth processing can be obtained solely from conventional‐spread P‐wave moveout. By performing tests on noise‐contaminated data we demonstrate that the tomographic inversion procedure reconstructs both the interfaces and the VTI parameters with high accuracy. Both SVD analysis and moveout inversion are implemented using an efficient modelling technique based on the theory of NMO‐velocity surfaces generalized for wave propagation through curved interfaces.     

Seismic traveltime inversion of 3D velocity model with triangulated interfaces

Seismic traveltime tomographic inversion has played an important role in detecting the internal structure of the solid earth. We use a set of blocks to approximate geologically complex media that cannot be well described by layered models or cells. The geological body is described as an aggregate of arbitrarily shaped blocks, which are separated by triangulated interfaces. We can describe the media as homogenous or heterogeneous in each block. We define the velocities at the given rectangle grid points for each block, and the heterogeneous velocities in each block can be calculated by a linear interpolation algorithm. The parameters of the velocity grid positions are independent of the model parameterization, which is advantageous in the joint inversion of the velocities and the node depths of an interface. We implement a segmentally iterative ray tracer to calculate traveltimes in the 3D heterogeneous block models. The damped least squares method is employed in seismic traveltime inversion, which includes the partial derivatives of traveltime with respect to the depths of nodes in the triangulated interfaces and velocities defined in rectangular grids. The numerical tests indicate that the node depths of a triangulated interface and homogeneous velocity distributions can be well inverted in a stratified model.     

Analysis of different parameterisations of waveform inversion of compressional body waves in an elastic transverse isotropic Earth with a vertical axis of symmetry

In a multi‐parameter waveform inversion, the choice of the parameterisation influences the results and their interpretations because leakages and the tradeoff between parameters can cause artefacts. We review the parameterisation selection when the inversion focuses on the recovery of the intermediate‐to‐long wavenumbers of the compressional velocities from the compressional body (P) waves. Assuming a transverse isotropic medium with a vertical axis of symmetry and weak anisotropy, analytical formulas for the radiation patterns are developed to quantify the tradeoff between the shear velocity and the anisotropic parameters and the effects of setting to zero the shear velocity in the acoustic approach. Because, in an anisotropic medium, the radiation patterns depend on the angle of the incident wave with respect to the vertical axis, two particular patterns are discussed: a transmission pattern when the ingoing and outgoing slowness vectors are parallel and a reflection pattern when the ingoing and outgoing slowness vectors satisfy Snell's law. When the inversion aims at recovering the long‐to‐intermediate wavenumbers of the compressional velocities from the P‐waves, we propose to base the parameterisation choice on the transmission patterns. Since the P‐wave events in surface seismic data do not constrain the background (smooth) vertical velocity due to the velocity/depth ambiguity, the preferred parameterisation contains a parameter that has a transmission pattern concentrated along the vertical axis. This parameter can be fixed during the inversion which reduces the size of the model space. The review of several parameterisations shows that the vertical velocity, the Thomsen parameter δ, or the Thomsen parameter ε have a transmission pattern along the vertical axis depending on the parameterisation choice. The review of the reflection patterns of those selected parameterisations should be done in the elastic context. Indeed, when reflection data are also inverted, there are potential leakages of the shear parameter at intermediate angles when we carry out acoustic inversion.     

Synthetic Seismograms and Wide-angle Seismic Attributes from the Gaussian Beam and Reflectivity Methods for Models with Interfaces and Velocity Gradients

— The effects of interfaces and velocity gradients on wide-angle seismic attributes are investigated using synthetic seismograms. The seismic attributes considered include envelope amplitude, pulse instantaneous frequency, and arrival time of selected phases. For models with interfaces and homogeneous layers, head waves can propagate which have lower amplitudes, as well as frequency content, compared to the direct arrivals. For media with interfaces and velocity gradients, higher amplitude diving waves and interference waves can also occur. The Gaussian beam and reflectivity methods are used to compute synthetic seismograms for simple models with interfaces and gradients. From the results of these methods, seismic attributes are obtained and compared. It was found that both methods were able to simulate wide-angle seismic attributes for the simple models considered. The advantage of using the Gaussian beam method for seismic modeling and inversion is that it is fast and also asymptotically valid for laterally varying media.     

Constrained tomography of realistic velocity models in microseismic monitoring using calibration shots

The knowledge of the velocity model in microseismic jobs is critical to achieving statistically reliable microseismic event locations. The design of microseismic networks and the limited sources for calibration do not allow for a full tomographic inversion. We propose optimizing a priori velocity models using a few active shots and a non‐linear inversion, suitable to poorly constrained systems. The considered models can be described by several layers with different P‐ and S‐wave velocities. The velocities may be constant or have 3D gradients; the layer interfaces may be simple dipping planes or more complex 3D surfaces. In this process the P‐ and S‐ wave arrival times and polarizations measured on the seismograms constitute the observed data set. They are used to estimate two misfit functions: i) one based on the measurement residuals and ii) one based on the inaccuracy of the source relocation. These two functions are minimized thanks to a simulated annealing scheme, which decreases the risk of converging to a local solution within the velocity model. The case study used to illustrate this methodology highlights the ability of this technique to constrain a velocity model with dipping layers. This was performed by jointly using sixteen perforation shots recorded during a multi‐stage fracturing operation from a single string of 3C‐receivers. This decreased the location inaccuracies and the residuals by a factor of six. In addition, the retrieved layer dip was consistent with the pseudo‐horizontal trajectories of the wells and the background information provided by the customer. Finally, the theoretical position of each calibration shot was contained in the uncertainty domain of the relocation of each shot. In contrast, single‐stage inversions provided different velocity models that were neither consistent between each other nor with the well trajectories. This example showed that it is essential to perform a multi‐stage inversion to derive a better updated velocity model.     

A nonlinear method for multiparameter inversion of pre‐stack seismic data based on anisotropic Markov random field

Multiparameter inversion for pre‐stack seismic data plays a significant role in quantitative estimation of subsurface petrophysical properties. However, it remains a complicated problem due to the non‐unique results and unstable nature of the processing; the pre‐stack seismic inversion problem is ill‐posed and band‐limited. Combining the full Zoeppritz equation and additional assumptions with edge‐preserving regularisation can help to alleviate these problems. To achieve this, we developed an inversion method by constructing a new objective function that includes edge‐preserving regularisation and soft constraints based on anisotropic Markov random fields and is intended especially for layered formations. We applied a fast simulated annealing algorithm to solve the nonlinear optimisation problem. The method directly obtains reflectivity R_PP values using the full Zoeppritz equation instead of its approximations and effectively controls the stability of the multiparameter inversion by assuming a sectionally constant S‐ and P‐wave velocity ratio and using the generalised Gardner equation. We substituted the inverted parameters, i.e., the P‐wave velocity, the fitting deviation of S‐wave velocity, and the density were inverted instead of the P‐wave velocity, the S‐wave velocity, and the density, and the generalised Gardner equation was applied as a constraint. Test results on two‐dimensional synthetic data indicated that our substitution obtained improved results for multiparameter inversion. The inverted results could be improved by utilising high‐order anisotropic Markov random field neighbourhoods at early stages and low‐order anisotropic Markov random field neighbourhoods in the later stages. Moreover, for layered formations, using a large horizontal weighting coefficient can preserve the lateral continuity of layers, and using a small vertical weighting coefficient allows for large longitudinal gradients of the interlayers. The inverted results of the field data revealed more detailed information about the layers and matched the logging curves at the wells acceptably over most parts of the curves.     

2D acoustic‐elastic coupled waveform inversion in the Laplace domain

Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time‐ and frequency‐domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non‐linear objective function and the unreliable low‐frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace‐domain waveform inversion has been proposed. The Laplace‐domain waveform inversion has been known to provide a long‐wavelength velocity model even for field data, which may be because it employs the zero‐frequency component of the damped wavefield and a well‐behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media. We extend the Laplace‐domain waveform inversion algorithm to a 2D acoustic‐elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic‐elastic coupled media, the Laplace‐domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic‐elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid‐solid interfaces. Our Laplace‐domain waveform inversion algorithm is also based on the finite‐element method and logarithmic wavefields. To compute gradient direction, we apply the back‐propagation technique. Under the assumption that density is fixed, P‐ and S‐wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace‐domain waveform inversion successfully recovers the long‐wavelength structures of the P‐ and S‐wave velocity models from the noise‐free data. The models inverted by the Laplace‐domain waveform inversion were able to be successfully used as initial models in the subsequent frequency‐domain waveform inversion, which is performed to describe the short‐wavelength structures of the true models.     

Surface‐wave inversion for a P‐velocity profile with a constant depth gradient of the squared slowness

Surface waves are often used to estimate a near‐surface shear‐velocity profile. The inverse problem is solved for the locally one‐dimensional problem of a set of homogeneous horizontal elastic layers. The result is a set of shear velocities, one for each layer. To obtain a P‐wave velocity profile, the P‐guided waves should be included in the inversion scheme. As an alternative to a multi‐layered model, we consider a simple smooth acoustic constant‐density velocity model, which has a negative constant vertical depth gradient of the squared P‐wave slowness and is bounded by a free surface at the top and a homogeneous half‐space at the bottom. The exact solution involves Airy functions and provides an analytical expression for the dispersion equation. If the ratio is sufficiently small, the dispersion curves can be picked from the seismic data and inverted for the continuous P‐wave velocity profile. The potential advantages of our model are its low computational cost and the fact that the result can serve as a smooth starting model for full‐waveform inversion. For the latter, a smooth initial model is often preferred over a rough one. We test the inversion approach on synthetic elastic data computed for a single‐layer P‐wave model and on field data, both with a small ratio. We find that a single‐layer model can recover either the shallow or deeper part of the profile but not both, when compared with the result of a multi‐layer inversion that we use as a reference. An extension of our analytic model to two layers above a homogeneous half‐space, each with a constant vertical gradient of the squared P‐wave slowness and connected in a continuous manner, improves the fit of the picked dispersion curves. The resulting profile resembles a smooth approximation of the multi‐layered one but contains, of course, less detail. As it turns out, our method does not degrade as gracefully as, for instance, diving‐wave tomography, and we can only hope to fit a subset of the dispersion curves. Therefore, the applicability of the method is limited to cases where the ratio is small and the profile is sufficiently simple. A further extension of the two‐layer model to more layers, each with a constant depth gradient of the squared slowness, might improve the fit of the modal structure but at an increased cost.     

场地土层模型参数的地震动记录反演方法

考虑场地土层不同物理参数的综合反演,改进了水平与竖向谱比(Horizontal-to-Vertical Spectral Ratio,简称HVSR)混合全局优化反演方法,进一步通过土层的S、P波波速、厚度、泊松比、密度和S、P波品质因子等土层参数反演的敏感性分析,形成了可同时反演场地土层厚度及剪切波速的混合全局优化反演方法.以美国GVDA和日本IWTH27竖向强震动观测台阵为例,分别以理论HVSR及加速度观测记录获得的HVSR曲线为目标,反演获得了场地浅层速度结构,并与观测台阵场地钻孔揭示的土层模型进行比较,验证了发展的反演方法的合理性和适用性.本文研究表明,基于地震加速度记录的HVSR全局优化反演方法是获取场地土层速度结构的一种有效的途径.     

Effect of lateral variation and model parameterization on surface wave dispersion inversion to estimate the average shallow structure in the Paraná Basin

The average layered structure of the intracratonic Paraná Basin, SE Brazil, is investigated with surface-wave group velocities from a small regional earthquake recorded by two broadband stations. Rayleigh and Love waves in the period range 1–4.2 s are used to infer average properties down to about 4 km. Genetic algorithm techniques are used to find the best fitting 1-D S-wave model. The inverted 1-D models show fair correlation with the average properties of the propagation paths as expected from geology and borehole information. However, different S-wave velocity models are obtained for the different inversion parameterizations. Since lateral heterogeneities are expected along the paths, several synthetic tests are performed with heterogeneous propagation paths. For approximately homogenous path (i.e., little lateral variation), the main features of the average synthetic model can be retrieved for different model parameterizations. For strong lateral variations, however, the average dispersion curve can produce very different 1-D inverted models depending on the parameterization. Also, the 1-D inverted models may differ significantly from the average properties of the inhomogeneous path, and wrong depths to interfaces may be inferred. For real data inversions, it is then suggested that various different parameterizations should be tested. If the resulting models show consistent features, this probably indicates homogeneity in the propagation path. But, if very different and unstable features are obtained in the 1-D inversions, then strong lateral variation may be present in the propagation path, and the average 1-D model may not represent average properties along the path.     

Determination of shale stiffness tensor from standard logs

A technique allowing inversion of the shale stiffness tensor from standard logging data: sonic velocities, density, porosity and clay content is developed. The inversion is based on the effective medium theory. The testing of the technique on laboratory measurements of the elastic wave velocities in shale samples shows that the inversion makes it possible to predict the elastic wave velocities V_P, V_S1 and V_S2 in any direction within an error of a few per cent. The technique has been applied for the stiffness tensor inversion along a well penetrating a shale formation of the Mississippian age altered by thin layers of limestone. It is demonstrated that the symmetry of a stiffness tensor inverted at the sonic frequency (2 kHz) is slightly orthorhombic and taking into account the experimental errors, can be related to the vertical transverse isotropy symmetry. For the productive interval of the shale formation, the Thomsen parameters ?, γ, and δ average, respectively, 0.32, 0.25 and 0.21, which indicate anelliptic behaviour of the velocities in this shale. The coefficients of anisotropy of this shale interval are around 24% and 20% for the compressional and shear waves, respectively. The values of the inverted velocities in the bedding plane for this interval are in good agreement with the laboratory measurements. The technique also allows inversion of the water saturation of the formation (Sw) and the inverted values are in agreement with the Sw values available for this formation. A Backus‐like upscaling of the inverted stiffness tensors is carried out for the lower and upper bounds of the frequency band used in the crosswell tomography (100 Hz and 500 Hz). These results can serve as an initial velocity model for the microearthquake location during hydrofracking of the shale formation.     

Stability of source mechanisms inverted from P‐wave amplitude microseismic monitoring data acquired at the surface

We study the stability of source mechanisms inverted from data acquired at surface and near‐surface monitoring arrays. The study is focused on P‐wave data acquired on vertical components, as this is the most common type of acquisition. We apply ray modelling on three models: a fully homogeneous isotropic model, a laterally homogeneous isotropic model and a laterally homogeneous anisotropic model to simulate three commonly used models in inversion. We use geometries of real arrays, one consisting in surface receivers and one consisting in ‘buried’ geophones at the near‐surface. Stability was tested for two of the frequently observed source mechanisms: strike‐slip and dip‐slip and was evaluated by comparing the parameters of correct and inverted mechanisms. We assume these double‐couple source mechanisms and use quantitatively the inversion allowing non‐double‐couple components to measure stability of the inversion. To test the robustness we inverted synthetic amplitudes computed for a laterally homogeneous isotropic model and contaminated with noise using a fully homogeneous model in the inversion. Analogously amplitudes computed in a laterally homogeneous anisotropic model were inverted in all three models. We show that a star‐like surface acquisition array provides very stable inversion up to a very high level of noise in data. Furthermore, we reveal that strike‐slip inversion is more stable than dip‐slip inversion for the receiver geometries considered here. We show that noise and an incorrect velocity model may result in narrow bands of source mechanisms in Hudson's plots.     

Moveout approximation for horizontal transversely isotropic and vertical transversely isotropic layered medium. Part I: 1D ray propagation‡

Anisotropy in subsurface geological models is primarily caused by two factors: sedimentation in shale/sand layers and fractures. The sedimentation factor is mainly modelled by vertical transverse isotropy (VTI), whereas the fractures are modelled by a horizontal transversely isotropic medium (HTI). In this paper we study hyperbolic and non‐hyperbolic normal reflection moveout for a package of HTI/VTI layers, considering arbitrary azimuthal orientation of the symmetry axis at each HTI layer. We consider a local 1D medium, whose properties change vertically, with flat interfaces between the layers. In this case, the horizontal slowness is preserved; thus, the azimuth of the phase velocity is the same for all layers of the package. In general, however, the azimuth of the ray velocity differs from the azimuth of the phase velocity. The ray azimuth depends on the layer properties and may be different for each layer. In this case, the use of the Dix equation requires projection of the moveout velocity of each layer on the phase plane. We derive an accurate equation for hyperbolic and high‐order terms of the normal moveout, relating the traveltime to the surface offset, or alternatively, to the subsurface reflection angle. We relate the azimuth of the surface offset to its magnitude (or to the reflection angle), considering short and long offsets. We compare the derived approximations with analytical ray tracing.     

基于异向波速模型的微震定位改进

针对波速分层的区域岩体,在异向波速模型的基础上,对垂向上的应力波按岩体波速值大小作分段区别,推导震源应力波走时关系式,建立分层速度定位目标函数,基于此提出一种由参数准备、层速度反演、微震定位三个模块组成的分层速度定位模型SV,并采用遗传算法进行优化求解.然后,对分层速度定位模型在已构建微震监测系统的白鹤滩水电站左岸岩质边坡进行验证.微震事件重定位结果表明,分层速度定位模型定位微震事件的最大、最小和平均偏离层内错动带程度指标较单一速度模型分别降低了57.17%、36.51%和57.35%,证明了定位模型在波速分层的区域岩体微震定位应用中比单一速度定位模型更加合理可靠.     

EXPLORING DEEP INTERFACES BY SEISMIC WIDE ANGLE MEASUREMENTS*

Amplitudes of the vertical ground motion are larger in the critical angle region than in the near vertical region, especially amplitudes coming from deeper boundaries or interfaces with small velocity contrast. Four basic boundary models are used to derive specific travel time patterns for first order and higher order interfaces. The transition from reflected waves to diving waves in the supercritical angle region is shown for the different models. Examples from wide angle surveys in Bavaria and in the Buchara region in the USSR have many characteristic similarities. Travel time patterns and asymptotic velocities are almost identical. The most important boundaries of the continental crust - the Mohorov? I? discontinuity and the top of the crystalline basement - correspond to two boundary models mentioned before. Amplitude and frequency investigations have been used to derive items of the M-discontinuity. It is certainly a gradient zone and seems to have a lenticular structure with material of stepwise different velocities.     

Cross double‐difference inversion for simultaneous velocity model update and microseismic event location

Microseismic monitoring is an approach for mapping hydraulic fracturing. Detecting the accurate locations of microseismic events relies on an accurate velocity model. The one‐dimensional layered velocity model is generally obtained by model calibration from inverting perforation data. However, perforation shots may only illuminate the layers between the perforation shots and the recording receivers with limited raypath coverage in a downhole monitoring problem. Some of the microseismic events may occur outside of the depth range of these layers. To derive an accurate velocity model covering all of the microseismic events and locating events at the same time, we apply the cross double‐difference method for the simultaneous inversion of a velocity model and event locations using both perforation shots and microseismic data. The cross double‐difference method could provide accurate locations in both the relative and absolute sense, utilizing cross traveltime differences between P and S phases over different events. At the downhole monitoring scale, the number of cross traveltime differences is sufficiently large to constrain events locations and velocity model as well. In this study, we assume that the layer thickness is known, and velocities of P‐ and S‐wave are inverted. Different simultaneous inversion methods based on the Geiger's, double‐difference, and cross double‐difference algorithms have been compared with the same input data. Synthetic and field data experiments suggest that combining both perforation shots and microseismic data for the simultaneous cross double‐difference inversion of the velocity model and event locations is available for overcoming the trade‐offs in solutions and producing reliable results.     

Out‐of‐plane effects in 2D borehole‐to‐surface resistivity tomography and applications in mineral exploration

In this paper, we discuss the effects of anomalous out‐of‐plane bodies in two‐dimensional (2D) borehole‐to‐surface electrical resistivity tomography with numerical resistivity modelling and synthetic inversion tests. The results of the two groups of synthetic resistivity model tests illustrate that anomalous bodies out of the plane of interest have an effect on two‐dimensional inversion and that the degree of influence of out‐of‐plane body on inverted images varies. The different influences are derived from two cases. One case is different resistivity models with the same electrode array, and the other case is the same resistivity model with different electrode arrays. Qualitative interpretation based on the inversion tests shows that we cannot find a reasonable electrode array to determine the best inverse solution and reveal the subsurface resistivity distribution for all types of geoelectrical models. Because of the three‐dimensional effect arising from neighbouring anomalous bodies, the qualitative interpretation of inverted images from the two‐dimensional inversion of electrical resistivity tomography data without prior information can be misleading. Two‐dimensional inversion with drilling data can decrease the three‐dimensional effect. We employed two‐ and three‐dimensional borehole‐to‐surface electrical resistivity tomography methods with a pole–pole array and a bipole–bipole array for mineral exploration at Abag Banner and Hexigten Banner in Inner Mongolia, China. Different inverse schemes were carried out for different cases. The subsurface resistivity distribution obtained from the two‐dimensional inversion of the field electrical resistivity tomography data with sufficient prior information, such as drilling data and other non‐electrical data, can better describe the actual geological situation. When there is not enough prior information to carry out constrained two‐dimensional inversion, the three‐dimensional electrical resistivity tomography survey is the better choice.     

模拟退火方法在三维速度模型地震波走时反演中的应用

采用块状建模以及三角形拼接的界面描述方式,并通过立方体速度网格线性插值获得块体内部的速度分布。正演过程中采用逐段迭代射线追踪方法计算三维复杂地质模型中的射线走时,并采用模拟退火方法进行了三维模型中的地震波走时反演研究。模型测试结果表明,使用的射线追踪和走时反演算法有效。