Investigation of a large collapse sinkhole affecting a multi-storey building by means of geophysics and the trenching technique (Zaragoza city,NE Spain)

An active sinkhole around 100 m long has been investigated in the city of Zaragoza (NE Spain). Subsidence activity on this depression, including the sudden occurrence of a collapse sinkhole 5 m across, led to the abandonment of a factory in the 1990s. At the present time, a building with 100 flats and shallow pad foundations partially built on the sinkhole, is affected by rapid differential settlement. The development of the sinkhole results from the karstification of the halite- and glauberite- bearing bedrock and the sagging and collapse of the overlying bedrock and alluvium, more than 30 m thick. GPR and electrical resistivity profiles have provided information on the distribution and geometry of the subsidence structure. The application of the trenching technique and geochronological methods (AMS and OSL dating) has allowed us to infer objective and practical data on the sinkhole including (1) Limits of the subsidence structure, (2) subsidence mechanisms, (3) cumulative subsidence (>408 cm), (4) subsidence rates on specific failure planes (>1.8 cm/year), (5) episodic displacement regime of some fault planes. The available information indicates that the progressive deformation recorded in the building will continue and might be punctuated by events of more rapid displacement. This work illustrates the practicality of the trenching technique for the study of sinkholes in mantled karst areas.     

Identification, prediction, and mitigation of sinkhole hazards in evaporite karst areas

Sinkholes usually have a higher probability of occurrence and a greater genetic diversity in evaporite terrains than in carbonate karst areas. This is because evaporites have a higher solubility and, commonly, a lower mechanical strength. Subsidence damage resulting from evaporite dissolution generates substantial losses throughout the world, but the causes are only well understood in a few areas. To deal with these hazards, a phased approach is needed for sinkhole identification, investigation, prediction, and mitigation. Identification techniques include field surveys and geomorphological mapping combined with accounts from local people and historical sources. Detailed sinkhole maps can be constructed from sequential historical maps, recent topographical maps, and digital elevation models (DEMs) complemented with building-damage surveying, remote sensing, and high-resolution geodetic surveys. On a more detailed level, information from exposed paleosubsidence features (paleokarst), speleological explorations, geophysical investigations, trenching, dating techniques, and boreholes may help in investigating dissolution and subsidence features. Information on the hydrogeological pathways including caves, springs, and swallow holes are particularly important especially when corroborated by tracer tests. These diverse data sources make a valuable database—the karst inventory. From this dataset, sinkhole susceptibility zonations (relative probability) may be produced based on the spatial distribution of the features and good knowledge of the local geology. Sinkhole distribution can be investigated by spatial distribution analysis techniques including studies of preferential elongation, alignment, and nearest neighbor analysis. More objective susceptibility models may be obtained by analyzing the statistical relationships between the known sinkholes and the conditioning factors. Chronological information on sinkhole formation is required to estimate the probability of occurrence of sinkholes (number of sinkholes/km² year). Such spatial and temporal predictions, frequently derived from limited records and based on the assumption that past sinkhole activity may be extrapolated to the future, are non-corroborated hypotheses. Validation methods allow us to assess the predictive capability of the susceptibility maps and to transform them into probability maps. Avoiding the most hazardous areas by preventive planning is the safest strategy for development in sinkhole-prone areas. Corrective measures could be applied to reduce the dissolution activity and subsidence processes. A more practical solution for safe development is to reduce the vulnerability of the structures by using subsidence-proof designs.     

Evaluation of susceptibility for terrain collapse and subsidence in karst areas,municipality of Iraquara,Chapada Diamantina (BA), Brazil

The morphological evolution of the karstic systems is associated with a set of physical and chemical processes, triggered by the dissolution of the rocks, related to percolation of groundwater and surface water, which consequently open underground voids and carve out peculiar forms of relief. Due to environmental and geotechnical aspects, this system is naturally more fragile and vulnerable than other natural systems and, therefore, has increasingly received the attention of the scientific community over the past decades. The objective of the study was to delimit zones with varying degrees of susceptibility for collapses and subsidence of sinkholes in the municipality of Iraquara, Chapada Diamantina (BA), Brazil, and to understand their geological and morphological determinant factors. Geological data, karst phenomenon map, and visual analysis in the field were used to categorize zones with different types of susceptibilities to the nucleation of new sinkholes based on a Hazard Index. This index was defined from the sum of geological hazard factors, lineament density, and sinkhole density. The areas that presented the highest susceptibility for terrain collapse and subsidence corresponded to regions where carbonate rocks outcrop, with high density of photolineaments and 2.62 sinkholes/km². Processes associated with terrain collapse and subsidence in karst areas consisted of a combination of various factors, hindering precise predictions. However, zones of different types of susceptibilities to terrain collapse and subsidence can be delimited when the relationships between these processes and their factors are understood. The Hazard Index proposed does not provide quantitative values for the probability of hazard susceptibility, but rather indicates areas that are more susceptible to terrain subsidence and collapse.     

Development and validation of sinkhole susceptibility models in mantled karst settings. A case study from the Ebro valley evaporite karst (NE Spain)

A preliminary sinkhole susceptibility analysis has been carried out in a stretch 50 km² in area of the Ebro valley alluvial evaporite karst (NE Spain). A spatial database consisting of a sinkhole layer and 27 thematic layers related to causal factors was constructed and implemented in a GIS. Three types of sinkholes were differentiated on the basis of their markedly different morphometry and geomorphic distribution: large subsidence depressions (24), large collapse sinkholes (23), and small cover-collapse sinkholes (447). The susceptibility models were produced analysing the statistical relationships between the mapped sinkholes and a set of conditioning factors using the Favourability Functions approach. The statistical analyses indicate that the best models are obtained with 6 conditioning factors out of the 27 available ones and that different factors and processes are involved in the generation of each type of sinkhole. The validation of two models by means of a random-split strategy shows that reasonably good predictions on the spatial distribution of future dolines may be produced with this approach; around 75% of the sinkholes of the validation sample occur on the 10% of the pixels with the highest susceptibility and about 45% of the area can be considered as safe.     

Natural and human-induced sinkhole hazards in Saudi Arabia: distribution,investigation, causes and impacts

Approximately 60 % of the 2,150,000 km² area of Saudi Arabia is underlain by soluble sediments (carbonate and evaporite rock formations, salt diapirs, sabkha deposits). Despite its hyper-arid climate, a wide variety of recent sinkholes have been reported in numerous areas, involving significant property losses. Human activities, most notably groundwater extraction, have induced unstable conditions on pre-existing cavities. This work provides an overview of the sinkhole hazard in Saudi Arabia, a scarcely explored topic. It identifies the main karst formations and the distribution of the most problematic sinkhole areas, illustrated through several case studies covering the wide spectrum of subsidence mechanisms. Some of the main investigation methods are presented through selected examples, including remote sensing, trenching and geophysics. Based on the available data, the main causal factors are identified and further actions that should be undertaken to better assess and manage the risk are discussed.     

The current status of mapping karst areas and availability of public sinkhole-risk resources in karst terrains of the United States

Subsidence from sinkhole collapse is a common occurrence in areas underlain by water-soluble rocks such as carbonate and evaporite rocks, typical of karst terrain. Almost all 50 States within the United States (excluding Delaware and Rhode Island) have karst areas, with sinkhole damage highest in Florida, Texas, Alabama, Missouri, Kentucky, Tennessee, and Pennsylvania. A conservative estimate of losses to all types of ground subsidence was $125 million per year in 1997. This estimate may now be low, as review of cost reports from the last 15 years indicates that the cost of karst collapses in the United States averages more than $300 million per year. Knowing when a catastrophic event will occur is not possible; however, understanding where such occurrences are likely is possible. The US Geological Survey has developed and maintains national-scale maps of karst areas and areas prone to sinkhole formation. Several States provide additional resources for their citizens; Alabama, Colorado, Florida, Indiana, Iowa, Kentucky, Minnesota, Missouri, Ohio, and Pennsylvania maintain databases of sinkholes or karst features, with Florida, Kentucky, Missouri, and Ohio providing sinkhole reporting mechanisms for the public.     

Spatial distribution, morphometry and activity of La Puebla de Alfindén sinkhole field in the Ebro river valley (NE Spain): applied aspects for hazard zonation

A highly active collapse sinkhole field in the evaporitic mantled karst of the Ebro river valley is studied (NE Spain). The subsidence is controlled by a NW-SE trending joint system and accelerated by the discharge of waste water from a nearby industrial state. The morphometry, spatial distribution and temporal evolution of the sinkholes have been analysed. The volume of the sinkholes yields a minimum estimate of average lowering of the surface by collapse subsidence of 46 cm. The clustering of the sinkholes and the tendency to form elongated uvalas and linear belts, in a NW–SE direction have a predictive utility and allow the establishment of criteria for a hazard zonation. With the precipitation record supplied by a pluviograph and periodic cartographic and photographic surveys the influence of heavy rainfall events on the triggering of collapses has been studied.     

Natural and human-induced sinkholes in gypsum terrain and associated environmental problems in NE Spain

The central Ebro Basin comprises thick evaporite materials whose high solubility produces typically karstic landforms. The sinkhole morphology developed in the overlying alluvium has been studied using gravimetry and ground-penetrating radar (GPR) on stream terraces, as well as analyzing the evolution of sinkhole morphologies observed in aerial photographs taken in 1928, 1957, and 1985. The sinkhole morphologies give some idea of possible subsurface processes as well as an indication of the final mechanisms involve in sinkhole development. On stream terraces and cover pediments the most commonly encountered dolines are bowl-shaped in their morphology with both diffuse and scarped edges. In contrast, dolines developed in the gypsiferous silt infilled valleys have a funnel and well-shaped morphology. The diffuse-edged bowl-shaped dolines are developed through the progressive subsidence of the alluvial cover, due to washing down of alluvial particles through small voids and cracks into deeper subsurface caves, resulting in a decrease alluvial density. Future compaction of the alluvial cover will produce surface subsidences. This type of dolines are associated with negative gravity anomalies. In contrast, the scarped-edge dolines are formed by the sudden collapse of a cavity roof. The cavities and cracks formed in the gypsum karst may migrate to the surface through the alluvial deposits by piping, and they may subsequently collapse. In this instance, the cavities can be detected by both gravity and GPR anomalies where the voids are not deeper than 4–5 m from the surface. These processes forming sinkholes can be enhanced by man-induced changes in the groundwater hydrologic regime by both inflows, due to irrigation, ditch losses, or pipe leakages, and by outflows from pumping activities.     

Application of matrix analysis in delineating sinkhole risk areas along highway (I-70 near Frederick,Maryland)

Sinkhole collapse in the area of Maryland Interstate 70 (I-70) and nearby roadways south of Frederick, Maryland, has been posing a threat to the safety of the highway operation as well as other structures. The occurrence of sinkholes is associated with intensive land development. However, the geological conditions that have been developing over the past 200 million years in the Frederick Valley control the locations of the sinkholes. Within an area of approximately 8 km², 138 sinkholes are recorded and their spatial distribution is irregular, but clustered. The clustering indicates the existence of an interaction between the sinkholes. The point pattern of sinkholes is considered to be a sample of a Gibbsian point process from which the hard-core Strauss Model is developed. The radius of influence is calculated for the recorded sinkholes which are most likely to occur within 30 m of an existing sinkhole. The stochastic analysis of the existing sinkholes is biased toward the areas with intensive land use. This bias is adjusted by considering (1) topography, (2) proximity to topographic depressions, (3) interpreted rock formation, (4) soil type, (5) geophysical anomalies, (6) proximity to geologic structures, and (7) thickness of overburden. Based on the properties of each factor, a scoring system is developed and the average relative risk score for individual 30-m segments of the study area is calculated. The areas designated by higher risk levels would have greater risk of a sinkhole collapse than the areas designated by lower risk levels. This risk assessment approach can be updated as more information becomes available.     

Karst database implementation in Minnesota: analysis of sinkhole distribution

This paper presents the overall sinkhole distributions and conducts hypothesis tests of sinkhole distributions and sinkhole formation using data stored in the Karst Feature Database (KFD) of Minnesota. Nearest neighbor analysis (NNA) was extended to include different orders of NNA, different scales of concentrated zones of sinkholes, and directions to the nearest sinkholes. The statistical results, along with the sinkhole density distribution, indicate that sinkholes tend to form in highly concentrated zones instead of scattered individuals. The pattern changes from clustered to random to regular as the scale of the analysis decreases from 10–100 km² to 5–30 km² to 2–10 km². Hypotheses that may explain this phenomenon are: (1) areas in the highly concentrated zones of sinkholes have similar geologic and topographical settings that favor sinkhole formation; (2) existing sinkholes change the hydraulic gradient in the surrounding area and increase the solution and erosional processes that eventually form more new sinkholes.     

Catastrophic subsidence: An environmental hazard,shelby county,Alabama

Induced sinkholes (catastrophic subsidence) are those caused or accelerated by human activities These sinkholes commonly result from a water level decline due to pumpage Construction activities in a cone of depression greatly increases the likelihood of sinkhole occurrence Almost all occur where cavities develop in unconsolidated deposits overlying solution openings in carbonate rocks. Triggering mechanisms resulting from water level declines are (1) loss of buoyant support of the water, (2) increased gradient and water velocity, (3) water-level fluctuations, and (4) induced recharge Construction activities triggering sinkhole development include ditching, removing overburden, drilling, movement of heavy equipment, blasting and the diversion and impoundment of drainage Triggering mechanisms include piping, saturation, and loading Induced sinkholes resulting from human water development/management activities are most predictable in a youthful karst area impacted by groundwater withdrawals Shape, depth, and timing of catastrophic subsidence can be predicted in general terms Remote sensing techniques are used in prediction of locations of catastrophic subsidence. This provides a basis for design and relocation of structures such as a gas pipeline, dam, or building Utilization of techniques and a case history of the relocation of a pipeline are described     

Subsidence hazard avoidance based on geomorphological mapping in the Ebro River valley mantled evaporite karst terrain (NE Spain)

In the valley of the Ebro River to the southeast of the city of Zaragoza (NE Spain), the dissolution of evaporite sediments (gypsum, halite and Na-sulphates) which underlie alluvial deposits gives rise to numerous sinkholes. These sinkholes are a potential hazard to human safety, particularly where they develop in a catastrophic way. Even slow-developing sinkholes are problematic, as they damage urban and agricultural infrastructure, necessitating costly repairs and vigilant maintenance. To assist in developing avoidance strategies for these hazards, the factors controlling sinkhole occurrence have been assessed using geomorphological maps produced from aerial photographs for 1956 and 1981. Important controls on sinkhole development are found to include underlying geological structure (manifest in preferred orientations of sinkholes on the azimuths N130-150E and N30-40E), and the presence of glauberite in the groundwater flow path, which apparently promotes accelerated gypsum dissolution. Perhaps surprisingly, alluvium thickness does not appear to significantly correlate with the density of sinkholes on the floodplain in this area. The maps for 1956 and 1981 reveal that both human activity and natural processes can serve to obscure the true density of sinkhole development. For instance, a large number of sinkholes which were conspicuous in 1956 have since been back-filled by farmers. In the most fluvially active zone of the Ebro valley (the meander belt), the relatively low density of sinkholes compared with adjoining zones suggests that subsidence is being masked by morpho-sedimentary dynamic processes (aggradation and erosion). Careful geomorphological mapping for different time periods yields a much more accurate impression of the frequency of sinkhole development than would be gained from surveying currently visible sinkholes in the area of interest.     

IFSAR-DEM在岩溶洼地探测中的应用——以薄荷省旁劳市沉降灾害评估为例

岩溶研究中,通常会使用高分辨率卫星图像和地理空间数据识别、描绘岩溶发育及相关地质灾害发生的地貌特征。本文旨在利用ArcGIS10.0确定干涉合成孔径雷达数字高程模型（IFSAR-DEM）识别、量化和描述岩溶洼地。这种半自动岩溶洼地/天坑探测方法采用水流模拟法,并结合（1）流域划分;（2）下沉填充法提取洼地特征;（3）下沉深度测量及分类;（4）使用2013年至2014年谷歌高光谱卫星图像和数字地形模型对探测到的岩溶洼地进行验证。该方法已在薄荷省旁劳市进行的评估中进行了预测试。使用国家测绘资源信息局（菲律宾）1991年的1:50 000比例尺地形图进行的初步封闭洼地分析,发现旁劳岛有15个天坑。利用5米高分辨率IFSAR-DEM,共探测到820个天坑,其中424个根据详细的地面实况进行了描绘,以验证了岩溶洼地的存在。地表实况包含天坑大小、形状和深度等基本形态测量分析以消除误报数据。阈值设定为沉降深度大于1米,孔径大于10米,从而最大程度精确区分实际的天坑。这种基于GIS的工具有助于生成高分辨率岩溶塌陷易发区图,继而指导当地规划者、工程师及决策者进行开发规划和土地利用。      

Relations between sinkhole density and anthropogenic contaminants in selected carbonate aquifers in the eastern United States

The relation between sinkhole density and water quality was investigated in seven selected carbonate aquifers in the eastern United States. Sinkhole density for these aquifers was grouped into high (>25 sinkholes/100 km²), medium (1–25 sinkholes/100 km²), or low (<1 sinkhole/100 km²) categories using a geographical information system that included four independent databases covering parts of Alabama, Florida, Missouri, Pennsylvania, and Tennessee. Field measurements and concentrations of major ions, nitrate, and selected pesticides in samples from 451 wells and 70 springs were included in the water-quality database. Data were collected as a part of the US Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program. Areas with high and medium sinkhole density had the greatest well depths and depths to water, the lowest concentrations of total dissolved solids and bicarbonate, the highest concentrations of dissolved oxygen, and the lowest partial pressure of CO₂ compared to areas with low sinkhole density. These chemical indicators are consistent conceptually with a conduit-flow-dominated system in areas with a high density of sinkholes and a diffuse-flow-dominated system in areas with a low density of sinkholes. Higher cave density and spring discharge in Pennsylvania also support the concept that the high sinkhole density areas are dominated by conduit-flow systems. Concentrations of nitrate-N were significantly higher (p < 0.05) in areas with high and medium sinkhole density than in low sinkhole-density areas; when accounting for the variations in land use near the sampling sites, the high sinkhole-density area still had higher concentrations of nitrate-N than the low sinkhole-density area. Detection frequencies of atrazine, simazine, metolachlor, prometon, and the atrazine degradate deethylatrazine indicated a pattern similar to nitrate; highest pesticide detections were associated with high sinkhole-density areas. These patterns generally persisted when analyzing the detection frequency by land-use groups, particularly for agricultural land-use areas where pesticide use would be expected to be higher and more uniform areally compared to urban and forested areas. Although areas with agricultural land use and a high sinkhole density were most vulnerable (median nitrate-N concentration was 3.7 mg/L, 11% of samples exceeded 10 mg/L, and had the highest frequencies of pesticide detection), areas with agricultural land use and low sinkhole density still were vulnerable to contamination (median nitrate-N concentration was 1.5 mg/L, 8% of samples exceeded 10 mg/L, and had some of the highest frequencies of detections of pesticides). This may be due in part to incomplete or missing data regarding karst features (such as buried sinkholes, low-permeability material in bottom of sinkholes) that do not show up at the scales used for regional mapping and to inconsistent methods among states in karst feature delineation.     

Formation mechanism of large sinkhole collapses in Laibin,Guangxi, China

On June 3, 2010, a series of karst sinkholes occurred at Jili village surrounded by Gui-Bei highway, Wu-Ping highway and Nan-Liu High-Speed Railway in Laibin, Guangxi, China. The straight-line distances from an large sinkhole pit, 85 m in diameter and 38 m in depth, to the above mainlines are 200, 600 and 500 m, respectively. Several investigation methods including geophysical technology, borehole and well drilling, groundwater elevation survey and hydrochemistry analysis of groundwater were used to study the formation mechanisms of these sinkholes. Based on the results, the spatial distribution of the Jili underground river was confirmed with a strike of SN along the middle Carboniferous limestone bedrock and the Quaternary deposits controlled the sinkhole formation. In addition, both historical sinkhole events and analysis of the groundwater–air pressure monitoring data installed in the underlying karst conduit system indicate that sinkholes in this area are more likely induced by extreme weather conditions within typical karst geological settings. Extreme weather conditions in the study area before the sinkhole collapses consisted of a year-long drought followed by continuous precipitation with a daily maximum precipitation of 442 mm between May 31 and June 1, 2010. Typical geological conditions include the Jili underground river overlain by the Quaternary overburden with thick clayey rubble. Especially in the recharge zone of the underground river, a stabilized shallow water table was formed in response to the extreme rainstorm because of the presence of the thick clayey rubble. When the underground conduit was flooded through the cave entrance on the surface, air blasting may have caused the cave roof collapse followed by formation of soil cavities and surface collapses. Borehole monitoring results of the groundwater–air pressure monitoring show that the potential karst sinkhole can pose threats to Shanbei village, the High-Speed Railway and the Wu-Ping highway. Local government needs to be aware of any early indicators of this geohazard so that devastating sinkholes can be prevented in the future. The results also suggest that groundwater–air pressure monitoring data collected both the Quaternary deposits and the bedrock karst system provide useful indicators for potential sinkhole collapses in similar karst areas where sinkholes usually occur during rainy season or karst groundwater level is always under the rockhead.     

A genetic classification of sinkholes illustrated from evaporite paleokarst exposures in Spain

This contribution analyses the processes involved in the generation of sinkholes from the study of paleokarst features exposed in four Spanish Tertiary basins. Bedrock strata are subhorizontal evaporites, and in three of the basins they include halite and glauberite in the subsurface. Our studies suggest that formation of dolines in these areas results from a wider range of subsidence processes than those included in the most recently published sinkhole classifications; a new genetic classification of sinkholes applicable to both carbonate and evaporite karst areas is thus proposed. With the exception of solution dolines, it defines the main sinkhole types by use of two terms that refer to the material affected by downward gravitational movements (cover, bedrock or caprock) and the main type of process involved (collapse, suffosion or sagging). Sinkholes that result from the combination of several subsidence processes and affect more than one type of material are described by combinations of the different terms with the dominant material or process followed by the secondary one (e.g. bedrock sagging and collapse sinkhole). The mechanism of collapse includes any brittle gravitational deformation of cover and bedrock material, such as upward stoping of cavities by roof failure, development of well-defined failure planes and rock brecciation. Suffosion is the downward migration of cover deposits through dissolutional conduits accompanied with ductile settling. Sagging is the ductile flexure of sediments caused by differential corrosional lowering of the rockhead or interstratal karstification of the soluble bedrock. The paleokarsts we analysed suggest that the sagging mechanism (not included in previous genetic classifications) plays an important role in the generation of sinkholes in evaporites. Moreover, collapse processes are more significant in extent and rate in areas underlain by evaporites than in carbonate karst, primarily due to the greater solubility of the evaporites and the lower mechanical strength and ductile rheology of gypsum and salt rocks.     

Dead Sea sinkholes – an ever-developing hazard

 Sinkhole development along the western shore of the Dead Sea became a major concern in 1990 with the appearance of a series of holes 2–15 m diameter and up to 7 m deep in the Newe Zohar area. One of these sinkholes, below the asphalt surface of the main road along the western shore of the Dead Sea, was opened by a passing bus. Repeated infilling and collapse of these holes indicated the extent of this ongoing process and the significance of this developing hazard. Since then sinkholes have developed in other areas including Qalia, Ein Samar, Ein Gedi and Mineral Beach. Three main types of sinkholes have been recognized. Gravel holes occurring in alluvial fans, mud holes occurring in the intervening bays of clay deposits between fans and a combination of both types at the front of young alluvial fans where they overlap mud flats. Fossil, relict sinkholes have been observed in the channels of some old alluvial fans. Sinkhole development is directly related to the regression of the Dead Sea and the corresponding lowering of the regional water table. Continuation of this process widens the neritic zone enveloping the sea and increases the sinkhole hazard of the region. Received: 4 February 1999 · Accepted: 8 April 1999     

Sinkhole formation and subsidence along the Dead Sea coast,Israel

More than 4,000 sinkholes have formed since the 1980s within a 60-km-long and 1-km-wide strip along the western coast of the Dead Sea (DS) in Israel. Their formation rate accelerated in recent years to >400 sinkholes per year. They cluster mostly in specific sites up to 1,000 m long and 200 m wide, which align parallel to the general direction of the fault systems associated with the DS Rift. The abrupt appearance of the sinkholes reflects changes to the groundwater regime around the shrinking DS. The eastward retreat of the shoreline and the lake-level drop (1 m/year in recent years) cause an eastward and downward migration of the fresh/saline groundwater interface. Consequently, a subsurface salt layer, which was previously enveloped by saline groundwater, is gradually being invaded and submerged by relatively fresh groundwater, and cavities form due to the rapid dissolution of the salt. Collapse of the overlying sediments into these cavities results in sinkholes at the surface. An association between sinkhole sites and land subsidence is revealed by interferometric synthetic aperture radar (InSAR) measurements. On a broad scale (hundreds of meters), subsidence occurs due to compaction of fine-grained sediments as groundwater levels decline along the retreating DS shoreline. At smaller scales (tens of meters), subsidence appears above subsurface cavities in association with the sinkholes, serving in many cases as sinkhole precursors, a few weeks to more than a year before their actual appearance at the surface. This paper overviews the processes of sinkhole formation and their relation to land subsidence.     

Models and mechanisms of drilling-induced sinkhole in China

The present paper distinguishes the four general types of collapsed sinkholes induced by drilling in regions where non-indurated sediments (clay, silt, and sand) overlie unknown caves or open voids in underlying lithified karst rocks. These sinkhole models are classified into balance arch, hourglass, vibration, and subjacent drilling-induced erosion forms. A mechanical model was built for each type to assess the collapse probability. Drilling operations using boreholes facilitate rapid, turbulent, and erosive flow. These activities resulted in the 26 sinkholes that have been attributed to constructions in China in the last several years. Awareness of potential collapse conditions should allow construction projects to avoid high-risk settings that result in economic losses, environmental concerns, and life-threatening accidents caused by such rapid collapse of the land surface. Awareness and close monitoring of high-risk conditions during borehole monitoring should minimize the hazard.     

Detection of sinkholes using 2D electrical resistivity imaging in the Cheria Basin (north–east of Algeria)

Sinkhole collapse is one of the main limitations on the development of karst areas, especially where bedrock is covered by unconsolidated material. Studies of sinkhole formation have shown that sinkholes are likely to develop in cutter (enlarged joint) zones as a result of subterranean erosion by flowing groundwater. Electrical resistivity imaging or tomography (RESTOM) is well suited to mapping sinkholes because of the ability of the technique for detecting resistive features and discriminating subtle resistivity variations. Two-dimensional electrical resistivity tomography surveys were conducted at two sinkhole sites near Cheria city where limestone is covered by about 10 m of clayey soils. A Wenner transect was conducted between the two sinkholes. The electrode spacing was 2 m. The length of transect is about 80 m. The survey results suggest that RESTOM is an ideal geophysical tool to aid in the detection and monitoring of sinkholes and other subsurface cavities.