合川地区须二段砂岩储层成岩作用及其对储层的影响

依据普通薄片、铸体薄片、扫描电镜、X衍射等实验分析手段,对合川地区须家河组二段砂岩储层的岩石学特征、成岩作用及孔隙演化进行了研究。结果表明,该区须二段砂岩储层主要由长石岩屑砂岩和岩屑长石砂岩组成。主要成岩作用类型有压实作用、胶结作用、溶蚀作用和交代作用,成岩演化阶段已达到中成岩B期。早成岩A期—B期,压实作用强烈,原生孔隙迅速减少;中成岩A期,压实作用及硅质胶结作用是原生孔隙继续降低,有机质热演化过程中产生的有机酸及无机酸,使长石及富长石的岩屑颗粒发生强烈溶蚀,形成大量次生孔隙;中成岩B期,含铁方解石及铁白云石交代充填,使储层致密。压实作用及胶结作用是原生孔隙遭受破坏的主要成岩作用类型,而溶蚀作用是形成次生孔隙的主要成岩作用类型。受成岩作用及成岩演化阶段的控制,研究区须二段储集空间类型多样,粒内溶孔、粒间溶孔及残余粒间孔发育,特别是长石及富长石岩屑颗粒的溶蚀,使须二段储层出现孔隙度、渗透率异常发育带。     

柴西南地区古—新近系砂岩储层成岩作用及其对储层物性的影响

依据普通薄片、铸体薄片、扫描电镜、X—衍射等分析,对柴西南地区古近—新近系砂岩储层的岩石学特征、成岩作用进行了研究,结果表明:该区储集砂体成分主要由长石岩屑砂岩、岩屑长石砂岩和岩屑砂岩组成,主要成岩作用类型有压实作用、胶结作用、溶蚀作用和交代作用,成岩演化阶段已达到中成岩B期;机械压实作用及胶结作用是早成岩阶段原生孔隙遭受破坏的主要成岩作用类型,溶蚀作用是中成岩阶段形成次生孔隙的主要成岩作用类型;受成岩作用及成岩演化阶段的控制,深部储层出现孔隙度、渗透率高异常发育带。     

东濮凹陷桥口构造沙三段储层成岩作用与孔隙演化

通过薄片观察、鉴定可知,桥口地区沙河街三段储集层砂岩成岩作用主要有压实作用、胶结作用、交代作用和溶蚀作用．孔隙以粒间溶孔、粒内溶孔和胶结物溶孔等次生溶孔为主．经粘土矿物X衍射分析,将成岩阶段划分为早成岩A、B期和晚成岩A1、A2、B期,早成岩A、B期的机械压实和胶结作用使原生孔隙大量丧失,晚成岩A1溶蚀作用对储层孔隙起重要改善作用,增加大量次生孔隙,晚成岩A2、B期方解石胶结物的胶结作用使砂岩次生孔隙大量减少．因此早期原牛孔隙的大量散失、晚期胶结作用使次生孔隙大量减少是造成本区砂岩低孔、低渗的主要原因．     

松辽盆地长岭凹陷中部上白垩统砂岩成岩作用及成岩相带

松辽盆地长岭凹陷中部上白垩统储层砂岩主要类型为岩屑长石砂岩,经历的成岩作用主要有以机械压实为主的压实作用,碳酸盐、粘土矿物、硅酸盐及硅质胶结为主的胶结作用,以长石、岩屑等不稳定组分溶解为主的溶蚀作用和局部发育的交代作用.研究区储层孔隙类型以粒间孔隙、粒内溶孔和铸模孔为主,其中粒间孔隙最为发育.储层砂岩成岩演化阶段处于早成岩B期—中成岩B期,主要为中成岩A期.结合沉积相和成岩作用特征,深入探讨了适合本区的成岩相的划分方案,划分的主要成岩相类型为压实成岩相、碳酸盐胶结相、不稳定组分溶蚀相、硅质胶结相和钠长石成岩相,成岩相决定储层的性能,不稳定组分溶蚀相和钠长石成岩相构成了本区的有利成岩相带.     

歧口凹陷歧北斜坡沙三段成岩作用及其对储层影响分析

根据常规薄片、铸体薄片、扫描电镜、X衍射、阴极发光等资料分析,对歧口凹陷歧北斜坡沙三段岩石学特征、成岩作用类型、成岩阶段划分及其对孔隙的影响进行了研究。结果表明,研究区沙三段储层岩石类型为长石岩屑砂岩、岩屑长石砂岩。现今主要处于早成岩B期、中成岩期,部分埋深较大的地区进入晚成岩期。经历的成岩作用有压实作用、胶结作用、交代作用、溶蚀作用、破裂作用。其中,压实作用、胶结作用是主要的破坏性成岩作用,溶蚀作用是主要的建设性成岩作用,特别对长石、岩屑和碳酸盐胶结物的溶蚀是储层物性变好的重要的成岩控制因素。     

松辽盆地龙西地区泉四段砂岩成岩序列及孔隙演化特征

通过岩芯观察、镜下薄片、扫描电镜和X衍射分析等资料,对松辽盆地龙西地区泉四段砂岩的岩石学特征、成岩作用类型、成岩阶段划分和成岩共生序列及孔隙演化特征进行了研究。结果表明：龙西地区泉四段主要为长石质岩屑砂岩,局部为岩屑质长石砂岩;经历的主要成岩作用类型有压实作用、自生石英胶结作用、自生黏土矿物胶结作用、碳酸盐胶结作用、交代和溶蚀作用等;龙西地区泉四段砂岩为中成岩阶段A期,且细分为A1和A2亚期;随着成岩演化,压实和胶结作用使得原生孔隙减小,而溶蚀作用使得储层孔隙结构得到改善;孔隙类型由缩小粒间孔组成变为由缩小粒间孔和溶蚀粒间孔组合组成。     

鄂尔多斯盆地安塞油田长10优质储层特征

鄂尔多斯盆地安塞油田长10期发育以细砂岩和中砂岩为主的长石砂岩,胶结物主要有浊沸石、石英加大等硅质胶结物、绿泥石和方解石;在早成岩早期酸性地层水大量溶蚀颗粒间胶结物,压实作用强烈,在中成岩早期,湖相泥岩中生成的酸性介质溶蚀砂岩颗粒间的胶结物及长石和岩屑颗粒碎屑,形成次生溶蚀孔隙,从而形成优质储层.纵向上,在不整合面和层序界面附近,储层溶蚀作用强烈,次生孔隙发育,是优质储层发育部位,向上溶蚀作用逐渐变弱;在平面上,越靠近湖盆中心溶蚀作用越强,越远离湖盆中心溶蚀作用越弱.鄂尔多斯盆地安塞油田长10优质储层主要发育在三角洲平原高能分流河道发育带,溶蚀作用形成的浊沸石溶蚀孔隙、方解石溶蚀孔隙、长石溶蚀孔隙等次生孔隙成为优质储层形成的有利相带.     

冷家沙三段砂岩成岩序列与孔隙演化

笔者以辽河盆地冷家地区冷94井为例，通过铸体薄片、电镜扫描、能谱 阴极发光等分析和实验手段，对沙三段砂岩的成岩历史、成岩序列与孔隙演化及发展趋势刊物, 出成岩阶段可划分为同生期→早成岩阶段早期→早成岩阶段晚期→晚成岩阶段早期。孔隙演化主要在压实作用，粘土矿物的包膜作用，方解石、白云石的胶结作用，长石溶蚀作用、石英的次生加大和微晶石英的沉淀作用等方面进行了研究，阐述并总结了它们互相之间的内在联系。     

准噶尔盆地西北缘克-百地区侏罗系成岩作用及其对储层质量的影响

准噶尔盆地西北缘克拉玛依—百口泉地区侏罗系砂岩、砂砾岩储层经历了压实、胶结、溶蚀等多种成岩作用,其中压实和溶蚀作用是控制储层物性的主要成岩作用,其次为胶结作用。压实作用以机械压实为主,是孔隙减少的主要原因。胶结作用主要为碳酸盐胶结,少量黄铁矿胶结,偶见方沸石胶结和硅质胶结。溶蚀作用导致碳酸盐胶结物、长石颗粒和少量岩屑溶解流失。储层孔隙经历了由原生到次生的演化过程。在成岩演化过程中,长石的溶蚀作用、碳酸盐矿物的沉淀与溶解作用是影响储层孔隙发育的关键因素,早期方解石的胶结有利于后期次生孔隙的形成。在克-乌断裂带上、下盘地层中,断裂带上盘埋深浅,一般小于1200m,原生孔隙非常发育;断裂带下盘埋深较深,压实作用强,原生孔隙所占比例明显减少,次生溶蚀孔隙相对发育。次生孔隙的形成受流体及断裂控制。     

鄂尔多斯盆地延长油气区山西组山2段储层砂岩成岩作用

根据薄片、铸体薄片、扫描电镜、X-射线衍射及化验分析等资料,对延长油气区山2段储层的岩石学特征、成岩作用类型和阶段划分及其对孔隙的影响进行了研究。研究表明,该区山2段储层砂岩以石英砂岩、岩屑质石英砂岩为主,成分成熟度较高,结构成熟度较低。成岩作用类型主要包括:压实作用、胶结作用和溶蚀作用。砂岩经历了早成岩阶段A、B期和晚成岩阶段A1、A2和B期的成岩演化阶段。压实作用和胶结作用是砂岩孔隙度降低的主要原因,分别造成19.5%和14%的原生孔隙丧失;溶解作用形成的次生孔隙在一定程度上改善了砂岩储集性能,溶蚀作用增加的新孔隙平均为1.7%。     

山东省牛庄洼陷古近系沙河街组沙三中亚段储集层成岩作用研究

山东省牛庄洼陷古近系沙河街组沙三中亚段储集层岩石类型以长石岩屑砂岩和岩屑长石砂岩为主,岩石结构成熟度和成分成熟度均较低。砂岩成岩作用包括压实作用、胶结作用、交代作用、溶解作用等。压实作用主要有刚性颗粒发生脆性破裂、颗粒之间呈线接触和凹凸接触、岩石碎屑颗粒呈明显的定向排列、塑性颗粒挤压变形或刚性颗粒嵌入变形颗粒中、粘土质碎屑被挤压变形发生假杂基化等五种表现形式。胶结物主要有泥质胶结物、碳酸盐胶结物、自生粘土矿物和自生石英、长石。交代作用主要有石英交代长石颗粒、碳酸盐胶结物交代石英、长石及岩屑颗粒、碳酸盐胶结物之间的相互交代。发生溶解作用的主要是石英、长石和岩屑颗粒,胶结物中主要是碳酸盐矿物。目前研究区沙三中亚段储集层成岩演化处于晚成岩A期。影响成岩作用的主要因素为岩石成分、沉积环境、孔隙流体性质等。成岩作用对储集物性的影响主要表现在孔隙度和渗透率的变化,其中压实作用和胶结作用使储层原生孔隙迅速减少、渗透率降低,使得储集物性变差;而溶解作用是次生孔隙发育的主要因素,从而改善砂岩的储集性能。     

The effects of diagenesis on the reservoir characters in sandstones of the Late Cretaceous Pab Formation,Kirthar Fold Belt,southern Pakistan

The Maastrichtian Pab Formation in the southern part of Pakistan is composed of fine- to very coarse-grained texturally mature quartz arenite and subordinate sublitharenite varieties. The sandstones have undergone intense and complex diagenetic episodes due to burial and uplift. Diagenetic modifications were dependent mainly on the clastic composition of sandstone, burial depth and thrust tectonics. Diagenetic events identified include compaction, precipitation of calcite, quartz, clay minerals and iron oxide/hydroxide, dissolution and alteration of unstable clastic grains as feldspar and volcaniclithic fragments as well as tectonically induced grain fracturing. The unstable clastic grains like feldspar and lithic volcanic fragments suffered considerable alteration to kaolinite and chlorite. Dissolution and alteration of feldspar and volcanic lithic fragments and pressure solution were the main sources of quartz cements. Mechanical compaction and authigenic cements like calcite, quartz and iron oxide/hydroxide reduced the primary porosity, whereas dissolution of clastic grains and cements has produced secondary porosity. Chlorite coatings on clastic grains have prevented quartz cementation. Coarse-grained, thick bedded packages of fluviodeltaic, shelf delta lobe and submarine channels facies have higher average porosity than fine-grained, thin bedded and bioturbated sandstone of deeper shelf and abyssal plain environments and these facies are concluded to be possible future hydrocarbon prospects.     

鄂尔多斯盆地姬塬西部三叠系延长组长8油层组成岩作用与致密化过程*

利用岩心、铸体薄片、扫描电镜、碳氧同位素及流体包裹体等资料,对鄂尔多斯盆地姬塬西部三叠系延长组长8油层组致密储集层特征进行了研究,重点分析了储集层成岩作用特征和储集层致密化成因机制及过程。研究区长8油层组砂岩主要为岩屑长石砂岩和长石岩屑砂岩,经历了压实—压溶、胶结、交代、溶蚀及构造破裂等成岩作用,整体处于中成岩A期晚期。典型成岩序列依次为机械压实、绿泥石黏土膜、早期(泥晶)方解石胶结、石英次生加大、长石、岩屑溶蚀、自生高岭石胶结、自生石英胶结、中期(含)铁方解石胶结。综合研究认为:(1)近物源伴随湖平面快速上升的沉积环境提供了储集层致密化的物质基础,不同沉积微相储集层物性差别较大,分流河道最好,分流间湾最差;(2)长8油层组原始孔隙度为41.35%,压实作用损孔率为50.67%,造成储集层孔隙度急剧降低,胶结作用损孔率为37.48%,导致孔隙度进一步减小,溶蚀作用仅增加了3.26%的孔隙度,难以有效改善储集层质量;(3)上述沉积与成岩因素共同导致储集层致密,致密化过程可分为压实孔隙骤减阶段、早期胶结减孔阶段、溶蚀作用增孔阶段和晚期胶结致密阶段共4个阶段;(4)油气大量充注期储集层孔隙度远低于10%,长8油层组先致密后成藏。     

海拉尔盆地乌尔逊-贝尔凹陷下白垩统火山碎屑岩成岩作用类型及序列

海拉尔盆地乌尔逊-贝尔凹陷下白垩统发育火山熔岩-正常碎屑沉积岩之间的过渡岩石类型,其成岩作用类型与正常沉积岩相比具有特殊性.采用显微镜下描述与扫描电镜分析相结合的方法对研究区成岩作用类型进行了研究,并总结出成岩作用序列.结果显示火山碎屑岩的成岩作用类型包括熔结作用、机械渗滤作用、压实作用、脱玻化作用、重结晶作用、胶结作用、自生矿物转化和溶蚀溶解作用.其中,熔结作用、脱玻化作用以及凝灰质的溶蚀溶解作用是火山碎屑岩所特有的成岩作用类型.研究区具有成因联系的成岩共生组合主要有4类,分别是:(1)微晶石英和微晶方解石;(2)石英的溶解与结晶;(3)自生白云母、蒙皂石、伊利石和绿泥石;(4)沸石与自生长石.成岩序列可以分为熔结作用阶段、机械渗滤作用阶段、脱玻化作用阶段、凝灰质溶蚀溶解作用阶段、粘土矿物混层阶段、自生白云母阶段、沸石胶结阶段、颗粒强烈胶结阶段以及铁白云发育阶段.研究区下白垩统处于早成岩B期至晚成岩B期,主要为晚成岩A期.      

Diagenesis impact on a deeply buried sandstone reservoir (Es1 Member) of the Shahejie Formation,Nanpu Sag,Bohai Bay Basin,East China

Diagenesis has a significant impact on reservoir quality in deeply buried formations. Sandstone units of the Shahejie Formation (Es₁ Member) of Nanpu Sag, Bohai Bay Basin, East China is a typical deeply buried sandstone with large hydrocarbon accumulations. The methodology includes core observations and thin section studies, using fluorescence, scanning electron microscope (SEM), cathodoluminescence (CL), fluid inclusion and isotope and electron probing analysis as well as the numerical determination of reservoir characteristics. The sandstones consist of medium to coarse-grained, slight to moderate sorted lithic arkose and feldspathic litharenite. Porosity and permeability values range from 0.5 to 30% and 0.006 to 7000 mD, respectively. The diagenetic history reveals mixed episodes of diagenesis and deep burial followed by uplift. The main diagenetic events include compaction, cementation alteration, dissolution of unstable minerals and grain fracturing. Compaction resulted in densification and significantly reduced the primary porosity. Quartz, calcite and clay are the dominant pore-occluding cement and occur as euhedral to subhedral crystals. Alteration and dissolution of volcanic lithic fragments and pressure solution of feldspar grains were the key sources of quartz cement whereas carbonate cement is derived from an external source. Clay minerals resulted from the alteration of feldspar and volcanic lithic fragments. Porosity and permeability data predict a good inverse relationship with cementation whereas leaching of metastable grains, dissolution of cement and in some places formation of pore-lining chlorite enhanced the reservoir quality. The best reservoir is thicker sandstone bodies that are medium to coarse-grained, well-sorted sandstone with low primary ductile grains with a minor amount of calcite cement. The present study shows several diagenetic stages in the Es₁ Member, but the overall reservoir quality is preserved.     

Diagenetic features of Jurassic Fort Member sandstone,Jaisalmer formation,western Rajasthan

Jaisalmer Formation consists of 360m thick succession of medium to coarse grained sandstones with interbeds of shale, claystone and occasional lignite that rest over Lathi Formation, is the basal part of the Jaisalmer basin. The rocks are exposed amidst desert, low mounds and shallow stone quarries. Sandstones were deposited in shallow marine to deltaic environments. The studied sandstones consist of abundant quartz followed by feldspar, mica, chert, rock fragments and heavy minerals. The study mainly deals with identification of various diagenetic features such as compaction, cementation and porosity evolution. During mechanical compaction rearrangement of grains took place and point, long and suture contacts were formed. The sandstones are cemented by iron oxide, silica overgrowth, carbonate and clay. Porosity has developed due to dissolution of iron, carbonate cement and feldspar grains. Dissolution and alteration of feldspar, lithic fragments and pressure solution were the main source of quartz cements. The sandstones show good amount of existing optical porosity with an average of 7.19%. Porosity reduction is mainly due to early stage of mechanical compaction and subsequent pervasive calcite and iron oxide cementation. Further, porosity reduced due to deposition of clay cement.     

Diagenetic evolution of the volcaniclastic deposits: an example from Neoproterozoic Dokhan Volcanics in Wadi Queih basin,central Eastern Desert,Egypt

Wadi Queih basin hosts a ～2,500-m thick Neoproterozoic volcanoclastic successions that unconformably lie over the oldest Precambrian basement. These successions were deposited in alluvial fan, fluviatile, lacustrine, and aeolian depositional environments. Diagenetic minerals from these volcaniclastic successions were studied by X-ray diffractometry, scanning electron microscopy, and analytical electron microscopy. The diagenetic processes recognized include mechanical compaction, cementation, and dissolution. Based on the framework grain–cement relationships, precipitation of the early calcite cement was either accompanied or followed by the development of part of the pore-lining and pore-filling clay cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cement and feldspar grains. In addition to calcite, several different clay minerals including kaolinite, illite, and chlorite with minor smectite occur as pore-filling and pore-lining cements. Chlorite coating grains helps to retain primary porosity by retarding the envelopment of quartz overgrowths. Clay minerals and their diagenetic assemblages has been distinguished between primary volcaniclastics directly produced by pyroclastic eruptions and epiclastic volcaniclastics derived from erosion of the pre-existing volcanic rocks. Phyllosilicates of the epiclastic rocks display wider compositional variations owing to wide variations in the mineralogical and chemical compositions of the parent material. Most of the phyllosilicates (kaolinite, illite, chlorite, mica, and smectite) are inherited minerals derived from the erosion of the volcanic basement complex, which had undergone hydrothermal alteration. Smectites of the epiclastic rocks are beidellite–montmorillonite derived from the altered volcanic materials of the sedimentary environment. Conversely, phyllosilicate minerals of the pyroclastic rocks are dominated by kaolinite, illite, and mica, which were formed by pedogenetic processes through the hydrothermal influence.     

陕甘宁盆地庆阳地区长8油层砂岩成岩作用及其对储层性质的影响

庆阳地区长8油层为湖泊三角洲前缘沉积。水下分流河道和河口砂坝组成的指状砂坝控制了水下三角洲沉积格局。砂岩主要由细砂和少量中砂组成,砂岩类型主要为细粒岩屑长石砂岩和长石岩屑砂岩。主要成岩矿物为绿泥石环边、方解石胶结物、石英和长石加大生长、伊利石、伊-蒙混层、钠长石和高岭石等。绿泥石环边的发育对原生粒间孔的保存起到有利的作用,对石英和长石加大起到抑制作用。烃类注入时储层埋深已较大,不利于孔隙保存。储层发育粒间孔隙、粒内溶孔、铸模孔隙、特大孔隙、裂缝孔隙和微孔隙等多种孔隙类型,其中以粒间孔隙最为发育。局部发育的特大孔隙和伸长状孔隙表明该区发生了一定规模的次生溶蚀作用。长8油层主要受埋藏作用的影响,成岩演化处于晚成岩A期。主要成岩相类型为绿泥石环边胶结成岩相、压实充填成岩相、压实压溶成岩相和碳酸盐胶结成岩相,不同成岩相类型决定了油气储层性质不同,绿泥石环边胶结成岩相构成了本区最好的储层类型。     

四川盆地西部须家河组砂岩储层成岩作用及致密时间讨论

运用沉积及成藏理论对四川盆地西部地区须家河组砂岩的岩石类型、成岩作用及其成藏时间研究表明:砂岩储层的主要成岩作用有压实和压溶作用、胶结作用,溶蚀作用、破裂作用以及自生矿物的沉淀作用.压实作用是砂岩粒间孔隙减少的主要因素,然而,方解石的强烈胶结作用以及石英的次生加大作用是造成须家河组砂岩储层致密的关键因素.方解石胶结物和石英次生加大包裹体的温度测定表明方解石胶结物主要发育在100℃～140℃之间,石英次生加大主要发生在80℃～126℃之间,在此温度区间,有机质演化已到了成熟期,并在60℃～80℃之间就开始发生运移.因此,砂岩储层的致密时间晚于天然气的生成和运移时间,砂岩储层的致密时间应该在燕山构造活动期,大约在1.5×10~8 a左右.     

苏北盆地金湖凹陷腰滩地区古近系阜宁组储层物性特征及其影响因素

苏北盆地金湖凹陷腰滩地区古近系阜宁组储层岩石类型以岩屑长石砂岩和长石砂岩为主,其成分成熟度中等,结构 成熟度中等到好。腰滩地区储层成岩作用主要包括压实、胶结、溶蚀和交代四种类型, 目前处于晚成岩阶段A期。研究区储 层的储集物性受成岩作用和构造运动的共同影响,主要表现为对孔隙度和渗透率的影响, 其中压实和胶结作用使储层原生 孔隙迅速减少、渗透率降低、储集物性变差,而溶解作用则是导致次生孔隙发育及改善砂岩储集性能的主要因素。压实作 用主要表现为刚性颗粒发生脆性破裂、塑性颗粒挤压变形或刚性颗粒嵌入塑性颗粒中、颗粒之间呈线接触和凹凸接触、碎 屑颗粒呈明显的定向排列等; 溶蚀作用表现为碳酸盐矿物的溶解; 胶结物主要为自生黏土矿物、碳酸盐和自生石英。交代作 用主要为碳酸盐胶结物交代石英、长石及岩屑颗粒及碳酸盐胶结物之间的相互交代等。构造运动使局部的储层物性得到改 善。