Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

Alkaline rocks of Samchampi-Samteran, District Karbi-Anglong, Assam, India

The Samchampi-Samteran alkaline igneous complex (SAC) is a near circular, plug-like body approximately 12 km² area and is emplaced into the Precambrian gneissic terrain of the Karbi Anglong district of Assam. The host rocks, which are exposed in immediate vicinity of the intrusion, comprise granite gneiss, migmatite, granodiorite, amphibolite, pegmatite and quartz veins. The SAC is composed of a wide variety of lithologies identified as syenitic fenite, magnetite ± perovskite ± apatite rock, alkali pyroxenite, ijolite-melteigite, carbonatite, nepheline syenite with leucocratic and mesocratic variants, phonolite, volcanic tuff, phosphatic rock and chert breccia. The magnetite ± perovskite ± apatite rock was generated as a cumulus phase owing to the partitioning of Ti, Fe at a shallow level magma chamber (not evolved DI = O1). The highly alkaline hydrous fluid activity indicated by the presence of strongly alkalic minerals in carbonatites and associated alkaline rocks suggests that the composition of original melt was more alkalic than those now found and represent a silica undersaturated ultramafic rock of carbonated olivine-poor nephelinite which splits with falling temperature into two immiscible fractions—one ultimately crystallises as alkali pyroxenite/ijolite and the other as carbonatite. The spatial distribution of varied lithotypes of SAC and their genetic relationships suggests that the silicate and carbonate melts, produced through liquid immiscibility, during ascent generated into an array of lithotypes and also reaction with the country rocks by alkali emanations produced fenitic aureoles (nephelinisation process). Isotopic studies (δ¹⁸O and δ¹³C) on carbonatites of Samchampi have indicated that the δ¹³C of the source magma is related to contamination from recycled carbon.     

电感耦合等离子体发射光谱法同时测定卤水中锂钠钾钙镁硼硫氯

建立了电感耦合等离子体发射光谱法(ICP-AES)同时测定碳酸盐型、硫酸盐型、氯化物型三种类型卤水中Li、Na、K、Ca、Mg、B、S、Cl等高低含量元素的分析方法。选择仪器最佳的工作条件为射频功率1400W,炬管位置位于-3,载气流量0.60 L/min。确定了各元素测定谱线,使用ICP-AES的双向观测模式、轴向观测模式测定Li、Ca、B、S、Cl以及低含量的K、Mg,径向观测模式测定高含量的Na、K、Mg,可确保卤水中不同含量的元素同时检出。Li、Na、K、Ca、Mg、B、S的检测下限为0.07～3.00 mg/L,Cl的测定下限为165mg/L。方法精密度(RSD,n=10)均小于5%,回收率为92.4%～109.7%。其中Na、K、Mg、S、Cl测定结果与传统方法测定结果基本吻合。     

Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA

The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.     

山东灵山岛滑塌体内部沉积及构造特征研究

青岛市灵山岛修船厂剖面下白垩统地层中发育良好的滑塌变形体。野外观察可见滑塌体岩性单元主要由厚层砂岩及砂页岩互层组成,其中厚层砂岩根据其沉积构造及成因机制可分为砂质碎屑流沉积及浊流沉积两类;砂页岩互层段砂岩层可见底模构造及粒序层理,为静水环境下远端浊流沉积。滑塌体内部构造主要可分为软褶皱变形、同生断层、透镜状砂质团块三种类型。其中,软褶皱变形根据岩性可分为砂岩软褶皱、砂页岩互层软褶皱及页岩软褶皱,随着变形强度增加,软褶皱枢纽逐渐平行于滑移方向,形成曲脊软褶皱或软鞘褶皱(soft sheath folds);同生断层出现在砂岩层中,根据力学性质分为正断层及逆断层,正断层为剪切拉伸所致,逆断层为软褶皱逆冲所致;透镜状砂质团块包括同沉积布丁构造和同沉积断块。根据滑塌体内部滑移面识别出三期滑塌,完整的滑塌体由底部拆离滑移面、下部厚层砂体、中部砂页岩互层及上部砂页岩互层未变形体组成,其组成特征及各部分接触关系反映了滑塌体中下部沿底部拆离滑移面发生滑塌变形,且于活动末期在相对静水条件下被上部砂页岩互层覆盖这一形成过程。根据滑塌体内部组成特征的有序性、相似性及滑塌体内部沉积构造特征,推测其触发机制可能为沉积物快速沉积所引发的重力滑塌成因。     

Tectonometamorphic Evolution of Jutulsessen,Gjelsvikfjella, cDML,East Antarctica

The Jutulsessen area, can provide a vital clue to the supercontinent assembly of Gondwana Land as it is situated within the Circum East Antarctic Mobile Belt just east of the Penksockett rift marking the divide between the central Dronning Maud Land from the Western Dronning Maud Land. This landmass is dominated by migmatitic quartzo-feldspathic rocks intruded by syn to post-tectonic granites. The work highlights the data from western part cDML area with a view to arrive at a more comprehensive model for the cDML and subsequently to the super continent assembly. Granitic and migmatitic gneisses comprising of amphibolitic and biotite rich enclaves. The gneisses show variations from quartzo-felspathic gneiss to amphibolitic gneiss. The area has witnessed complex geological history involving at different deformational episodes with concomitant metamorphism. The pervasive dominant foliation trends NW-SE with shallow to medium dips towards SW. In the Stabben area, a nonfoliated intrusive syenite-gabbro pluton limits the gneissic exposures. Compositionally, the orthogneisses plot in the monzogranitegranodiorite field where as the mafic dykes/enclaves plot in the basalt-andesite-rhyodacite field. The bulk geochemical characteristics suggest significant crustal contamination. Garnet-biotite Fe-Mg exchange thermometry gives peak metamorphic temperature of 483° C for the gneisses and 628° C for the dioritic enclave within gneisses. A peak metamorphic grade of upper amphibolite to granulite facies is deduced from the mineral assemblages. Widespread anatexis has led to extensive occurrence of migmatites in the area. Recent geochronological studies assign an age of 1170 Ma to 970 Ma for the migmatites/gneisses and an emplacement age of 501 Ma for the Stabben gabbro and syenite. The discriminant plots of the Jutulsessen rocks indicate diverse origin ranging from pre-plate collision to post-collision orogenic tectonic setting. The mafic enclaves/dykes show ocean island arc to MORB affinities. Voluminous addition of juvenile crust during the Pan-African orogeny strongly overprints earlier structures.     

Petrographic, mineralogy, and geochemistry of coals of Pabedana, Kerman Province, Central Iran

This paper discusses the result of the detailed investigations carried out on the coal characteristics, including coal petrography and its geochemistry of the Pabedana region. A total of 16 samples were collected from four coal seams d2, d4, d5, and d6 of the Pabedana underground mine which is located in the central part of the Central-East Iranian Microcontinent. These samples were reduced to four samples through composite sampling of each seam and were analyzed for their petrographic, mineralogical, and geochemical compositions. Proximate analysis data of the Pabedana coals indicate no major variations in the moisture, ash, volatile matter, and fixed carbon contents in the coals of different seams. Based on sulfur content, the Pabedana coals may be classified as low-sulfur coals. The low-sulfur contents in the Pabedana coal and relatively low proportion of pyritic sulfur suggest a possible fresh water environment during the deposition of the peat of the Pabedana coal. X-ray diffraction and petrographic analyses indicate the presence of pyrite in coal samples. The Pabedana coals have been classified as a high volatile, bituminous coal in accordance with the vitrinite reflectance values (58.75–74.32 %) and other rank parameters (carbon, calorific value, and volatile matter content). The maceral analysis and reflectance study suggest that the coals in all the four seams are of good quality with low maceral matter association. Mineralogical investigations indicate that the inorganic fraction in the Pabedana coal samples is dominated by carbonates; thus, constituting the major inorganic fraction of the coal samples. Illite, kaolinite, muscovite, quartz, feldspar, apatite, and hematite occur as minor or trace phases. The variation in major elements content is relatively narrow between different coal seams. Elements Sc,, Zr, Ga, Ge, La, As, W, Ce, Sb, Nb, Th, Pb, Se, Tl, Bi, Hg, Re, Li, Zn, Mo, and Ba show varying negative correlation with ash yield. These elements possibly have an organic affinity and may be present as primary biological concentrations either with tissues in living condition and/or through sorption and formation of organometallic compounds.     

电感耦合等离子体发射光谱法测定钼矿石中钴铬铜钼镍铅锡钨钇锌

采用盐酸-硝酸-氢氟酸-高氯酸-柠檬酸处理样品,电感耦合等离子体发射光谱法同时测定钼矿中钴、铬、铜、钼、镍、铅、锡、钨、钇、锌10个元素,筛选了不同溶矿方法和仪器参数条件。测定的相对标准偏差(RSD,n=11)均小于3.0%,经国家一级钼矿标准物质分析验证,结果与推荐值吻合。     

微波消解-电感耦合等离子体发射光谱法同时测定白云石中铁铝钙镁钾钠硫

采用微波消解白云石样品，电感耦合等离子体发射光谱法测定其中铁、铝、钙、镁、钾、钠、硫的氧化物，对微波消解条件和等离子体发射光谱仪的工作条件进行了选择，克服了常规化学分析方法步骤繁琐、耗时长、工作量大的不足。利用所建立的方法快速分析了白云石中铁、铝、钙、镁、钾、钠、硫的含量，结果与标准值或化学法相符，10次测定的相对标准偏差（RSD）7种元素均小于1％，可以满足生产和科研的要求。     

Stratigraphic status,age, and paleobathymetry of the Grey shale Member,Dalmiapuram Formation,Cauvery Basin,India

Grey shale Member of the Dalmiapuram Formation, Ariyalur Group, Cauvery Basin, India was studied for its stratigraphic position, age, and paleobathymetry with a re-look into the lithological relationship and foraminifer assemblages in the deepened limestone mine excavations at M/s Dalmia Cements, Dalmiapuram. Twenty grey shale samples from Kovandankurchchi (pit-4) and Kallakkudi mines yielded diversified calcareous, benthic, and rare index planktic foraminifera. The foraminiferal assemblages suggest a latest Albian age and middle neritic depositional conditions. The abundance of kaolinite and smectite clay minerals relate to warm/humid climate which corroborate with rising relative sea level during grey shale deposition. The grey shale occurs in patches within the marl bedded limestone member which exhibits cyclic deposition of limestone and marl. The limestone mine sections demonstrate that the grey shale forms part of basal marl bedded limestone, directly overlying the coral algal limestone. The present study demonstrates that the grey shale outcrops in Dalmiapuram Formation should be placed stratigraphically as part of marl bedded limestone. The member status for grey shale which is current usage stands discounted.     

Geology, petrochemistry, and genesis of the bimodal lavas of Osham Hill, Saurashtra, northwestern Deccan Traps

The Saurashtra region in the northwestern Deccan continental flood basalt province (India) is notable for compositionally diverse volcano-plutonic complexes and abundant rhyolites and granophyres. A lava flow sequence of rhyolite-pitchstone-basaltic andesite is exposed in Osham Hill in western Saurashtra. The Osham silicic lavas are Ba-poor and with intermediate Zr contents compared to other Deccan rhyolites. The Osham silicic lavas are enriched in the light rare earth elements, and have ε_Nd (t = 65 Ma) values between −3.1 and −6.5 and initial ⁸⁷Sr/⁸⁶Sr ratios of 0.70709-0.70927. The Osham basaltic andesites have initial ε_Nd values between +2.2 and −1.3, and initial ⁸⁷Sr/⁸⁶Sr ratios of 0.70729-0.70887. Large-ion-lithophile element concentrations and Sr isotopic ratios may have been affected somewhat by weathering; notably, the Sr isotopic ratios of the silicic and mafic rocks overlap. However, the Nd isotopic data indicate that the silicic lavas are significantly more contaminated by continental lithosphere than the mafic lavas. We suggest that the Osham basaltic andesites were derived by olivine gabbro fractionation from low-Ti picritic rocks of the type found throughout Saurashtra. The isotopic compositions, and the similar Al₂O₃ contents of the Osham silicic and mafic lavas, rule out an origin of the silicic lavas by fractional crystallization of mafic liquids, with or without crustal assimilation. As previously proposed for some Icelandic rhyolites, and supported here by MELTS modelling, the Osham silicic lavas may have been derived by partial melting of hot mafic intrusions emplaced at various crustal depths, due to heating by repetitively injected basalts. The absence of mixing or mingling between the rhyolitic and basaltic andesite lavas of Osham Hill suggests that they reached the surface via separate pathways.     

滇西勐海西定地区南段组褶叠层构造及其研究意义

滇西勐海西定地区,在大地构造上位于西南“三江”造山带南段昌宁-孟连结合带东侧的双江-澜沧俯冲增生杂岩带内。该区分布有一套晚古生代的浅变质碎屑岩系--南段组(DCn)。该套地层既显示层型面状构造型式,又发育有顺层片理、顺层掩卧褶皱、粘滞型石香肠及顺层韧性剪切带等构造形迹,具明显的分层剪切变形、横向构造置换和顺层固态流变特点,构成较典型的褶叠层构造。本文对其构造变形特征进行了系统分析与总结,结合区域构造背景研究成果认为,南段组褶叠层构造总体形成于昌宁-孟连古特提斯洋闭合后同碰撞造山收缩挤压背景下的伸展剪切机制。同时指出,南段组是经过构造改造重建而形成的构造地层单元,应称其为南段岩组;现今露头剖面所见南段岩组岩性组合及厚度只代表改造后构造地层的岩性组合特征及褶叠层的露头厚度,不能完全代表南段组原沉积地层的韵律组合及沉积地层厚度;应按构造地层单位进行划分、填图和研究。褶叠层构造作为浅变质岩区一种普遍的构造型式,是对岩石变形组合特征的客观认识,其构造型式、形成机制、形成层次以及形成时间的研究对分析造山带构造演化过程和深化大陆动力学机制的认识具有科学意义。     

X射线荧光光谱法测定生物样品中氯硫氮磷钾铜锌溴

研究了用微晶纤维素垫底镶边粉末压片制样-X射线荧光光谱测定生物样品中的Cl、S、N、P、K、Cu、Zn和Br的分析方法。重点研究了N的分析条件和校正方式,K、Cu和Zn的内标选定,测量次数对测定结果的影响。方法的检出限、精密度和准确度基本满足生物样品的分析要求。方法用于实际生物样品的测定,结果与化学法相符。     

云南德钦鲁春铜铅锌矿床硫铅氢氧同位素特征及地质意义

鲁春铜铅锌矿床位于中咱-中甸板块和昌都-思茅板块之间的金沙江构造带中部,矿体长约3 km,厚度在1.06～16.35 m之间。其赋矿围岩为火山沉积岩系,容矿构造为印支期逆断层。鲁春铜铅锌矿床矿石中硫化物的δ34S值变化于3.5‰～6.8‰之间,硫化物的206Pb/204Pb比值为18.554～18.656,207Pb/204Pb比值为15.662～15.752,208Pb/204Pb比值为38.801～39.009。石英流体包裹体的HO182δO值变化范围为2.74‰～1.25‰,δDV-SMOW变化范围为107‰～123‰。鲁春铜铅锌矿床的硫铅氢氧同位素分析结果表明,该矿床成矿物质来源于地幔,部分来源于岩浆,在成矿流体上升过程中,有壳源物质的加入。早二叠世晚期金沙江洋盆向西俯冲形成了一系列逆断层,同时导致下地壳部分熔融,引发大规模的火山岩浆作用。在晚三叠世早期,构造背景由挤压环境到伸展环境的转折期,这些逆断层具有张性的特点,为后期的成矿热液提供了有利的容矿构造。上升的岩浆为地幔楔内的成矿流体提供了通道。岩浆内的部分成矿流体进入白茫雪山花岗闪长岩体附近的逆断层富集成矿。     

柴北缘双口山石英正长岩锆石U-Pb定年、地球化学及Sr-Nd同位素特征

本文报道了柴北缘西段双口山地区石英正长岩锆石U-Pb年代学,全岩地球化学和Sr-Nd同位素等分析结果。石英正长岩岩体具有高硅(SiO_2=59.47%～68.66%)、碱性?过碱性(全碱含量为11.18%～14.04%),贫CaO(0.31%～3.30%)的特征。其里特曼指数σ为4.87～9.55、铝饱和指数(A/CNK)=1.12～1.36,属钾玄岩系列,过铝质范围。稀土元素总量高(ΣREE=231.31×10^–6～569.26×10^–6),富集轻稀土元素,亏损重稀土元素((La/Yb)_N=24.03～58.33),具弱Eu负异常(Eu/Eu*=0.72～0.95);微量元素亏损Ba、Sr、Ti、P,富集Rb、Th、U、Zr、Y和Ga,具有A型花岗岩特点,根据微量元素组成判别其产出于板内环境。锆石LA-ICP-MS U-Pb定年获得加权平均年龄为243.5±1.6 Ma,属中三叠世。样品的?_Nd(t)介于–1.08～–2.15,二阶段模式年龄t_DM2=1.10～1.19 Ga,表明其具有多源特征,是受到俯冲组分改造或影响的岩石圈地幔熔体和中新元古代变质基底熔体发生岩浆混合作用的结果,其形成与三叠纪古特提斯洋向北俯冲导致弧壳增厚和发生弧后拉裂有关。     

ICP-MS测定土壤中的As、Cr、Pb、Se、Cu和Zn

本文用电感耦合等离子质谱法(ICP-MS)测定了土壤的As、Cr、Pb、Se、Cu和Zn6种微量元素的质量分数,以In作为内标进行基体效应的补偿,方法快速灵敏,回收率为92.4%～106.8%,相对标准偏差小于5.0%,结果达到国家标准要求。     

Composition,radioactivity, and possible applications of kaolin deposits of Sinai,Egypt

This work discusses the composition, radioactivity, and possible utilization of the kaolin resources in Sinai which are hosted in thick sandstone sequences belonging to the Carboniferous (Wadi Khaboba) and Early Cretaceous (Wadi Iseila and Abansakar) ages. The characterization of kaolin was done by microscopic and SEM examination, supported by XRD and ICP-MS analyses. The studied kaolin resources consist of kaolinite, as the main constituent, associated with subsidiary dickite and halloysite, and minor contribution of smectite and illite. The most dominant non-clay mineral is quartz, besides minor gypsum, dolomite, and hematite. Ferrugination dominates, in most cases, at the upper boundaries of the kaolin lenses, suggesting possible supergene activity. The high Al₂O₃/SiO₂ ratio for the Cretaceous kaolin (0.54, in average) specifies its better grade relative to the Carboniferous kaolin (0.43, in average). The kaolin of the middle part of lens C in Wadi Iseila contains Si/Al molecular ratio of about unity, suggesting high-grade kaolin. The Carboniferous kaolin has enriched the radionuclides: U, Th, and Ra (at disequilibrium state due to leaching of eU relative to Ra) and the REE, relative to that of the Cretaceous age. The Carboniferous kaolin is characterized by a higher contribution of HREE (zircon signature), whereas LREE seems to be more influential for the Early Cretaceous kaolin (monazite signature). In spite of the very high CIA index (93 to 99), none of the analyzed kaolin deposits displays Ce abnormality. The high radioactivity of some Carboniferous kaolin can be a serious impediment for its utilization or its exportation. The kaolin of Sinai does not satisfy the international standards for paperwork industries and refractory manufacturing, but beneficiation may overcome this challenge. However, some lenses have high-grade kaolin with a low percentage of oxides of iron, magnesium, calcium, sodium, and potassium and a low radioactivity, hence nominated for the local refractory industry. The high-grade kaolin of Sinai fulfills the standards required for ceramics manufacturing in the global market. Grade 3 kaolin (< 30%, Al₂O₃) can be used in the manufacturing of white Portland cement and red glaze manufacturing on both local and global markets.     

Multicomponent diffusion of a suite of tracers (HTO, Cl, Br, I, Na, Sr, Cs) in a single sample of Opalinus Clay

Diffusion experiments with HTO, ³⁶Cl⁻, Br⁻, I⁻, ²²Na⁺, ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ at trace concentrations in a single sample of Opalinus Clay are modeled with PHREEQC’s multicomponent diffusion module. The model is used first in a classical approach to derive accessible porosities, geometrical factors (the ratio of pore tortuosity and constrictivity) and sorption behavior of the individual tracers assuming that the clay is homogeneous. The accessible porosity for neutral species and cations is obtained from HTO, the anion exclusion volume from ³⁶Cl⁻ and Br⁻, and the cation exchange capacity from ²²Na⁺. The homogeneous model works well for tritium, the anions and ²²Na⁺. However, the ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ experiments show an early arrival of the tracer and a front-form that suggest a dual porosity structure. A model with 10% dead-end pores, containing 19% of the total exchange capacity, can satisfactorily calculate all the experimental data. The Cs⁺ diffusion model builds on a 3-site exchange model, constructed from batch sorption data. The excellent agreement of modeled and measured data contradicts earlier reports that the exchange capacity for Cs⁺ would be smaller in diffusion than in batch experiments.The geometrical factors for the anions are 1.5 times larger than for HTO, and for the cations 2-4 times smaller than for HTO. The different behavior is explained by a tripartite division of the porespace in free porewater, diffuse double layer (DDL) water, and interlayer water in montmorillonite. Differences between estimated and observed geometrical factors for cations are attributed to increased ion-pairing of the divalent cations in DDL water as a result of the low relative dielectric permittivity. Interlayer and/or surface diffusion contributes significantly to the diffusive flux of Cs⁺ but is negligible for the other solutes. The geometrical factors for anions are higher than estimated, because pore constrictions with overlapping double layers force the anions to take longer routes than HTO and the cations. Small differences among the anions can also be attributed to different ion-pairing in DDL water.     

Sharp-based, tide-dominated deltas of the Sego Sandstone, Book Cliffs, Utah, USA

The lower part of the Cretaceous Sego Sandstone Member of the Mancos Shale in east‐central Utah contains three 10‐ to 20‐m thick layers of tide‐deposited sandstone arranged in a forward‐ and then backward‐stepping stacking pattern. Each layer of tidal sandstone formed during an episode of shoreline regression and transgression, and offshore wave‐influenced marine deposits separating these layers formed after subsequent shoreline transgression and marine ravinement. Detailed facies architecture studies of these deposits suggest sandstone layers formed on broad tide‐influenced river deltas during a time of fluctuating relative sea‐level. Shale‐dominated offshore marine deposits gradually shoal and become more sandstone‐rich upward to the base of a tidal sandstone layer. The tidal sandstones have sharp erosional bases that formed as falling relative sea‐level allowed tides to scour offshore marine deposits. The tidal sandstones were deposited as ebb migrating tidal bars aggraded on delta fronts. Most delta top deposits were stripped during transgression. Where the distal edge of a deltaic sandstone is exposed, a sharp‐based stack of tidal bar deposits successively fines upward recording a landward shift in deposition after maximum lowstand. Where more proximal parts of a deltaic‐sandstone are exposed, a sharp‐based upward‐coarsening succession of late highstand tidal bar deposits is locally cut by fluvial valleys, or tide‐eroded estuaries, formed during relative sea‐level lowstand or early stages of a subsequent transgression. Estuary fills are highly variable, reflecting local depositional processes and variable rates of sediment supply along the coastline. Lateral juxtaposition of regressive deltaic deposits and incised transgressive estuarine fills produced marked facies changes in sandstone layers along strike. Estuarine fills cut into the forward‐stepped deltaic sandstone tend to be more deeply incised and richer in sandstone than those cut into the backward‐stepped deltaic sandstone. Tidal currents strongly influenced deposition during both forced regression and subsequent transgression of shorelines. This contrasts with sandstones in similar basinal settings elsewhere, which have been interpreted as tidally influenced only in transgressive parts of depositional successions.