The sources of metal contents in the shelf sediments from the Marmara Sea, Turkey

The shelf area is the largest morphological unit of the Marmara Sea and is subjected to increasing population, urbanization, and industrial activities. Metal contents (Al, Fe, Mn, Cu, Pb, Zn, Ni, Cr, Co and Hg) of the surface sediments from the shelf areas of the Marmara Sea generally do not indicate shelf-wide pollution. The variability of the metal contents of the shelf sediments is mainly governed by the geochemical differences in the northern and southern hinterlands. Northern shelf sediments contain lower values compared to those of the southern shelf, where higher Ni, Cr, Pb, Cu and Zn are derived from the rock formations and mineralized zones. However, besides from the natural high background in the southern shelf, some anthropogenic influences are evident from EF values of Pb, Zn and Cu, and also from their high mobility in the semi-isolated bay sediments. Anthropogenic influences are found to be limited at the confluence of Istanbul Strait in the northern shelf. However, suspended sediments along the shallow parts of the northern shelf were found to be enriched in Pb and Hg and to a lesser degree in Zn, reflecting anthropogenic inputs from Istanbul Metropolitan and possibly from the Black Sea via the Istanbul Strait.     

太平洋北部铁锰结核富集区沉积物的元素地球化学特征

本文对太平洋北部铁锰结核富集区沉积物的元素地球化学作了较为详细的研究。因子分析提供的信息表明,元素的分布主要受三个因子控制:（1）粘土及Fe、Mn氧化物水化物胶体的吸附作用;（2）生物化学作用过程有关的自生沉积作用;（3）海底页岩风化及附近海区的火山喷发作用。元素的来源:（1）Fe、Mn、Cu、Co、Ni、Zn、Cr、Cr、Mg、Al、Ti、K共生,主要来自粘土吸附;（2）C_有机、N、Sr、Na及Si、Ca、Sr主要来自生物化学过程沉积;（3）Pb主要来源于岩石碎屑（火山喷发碎屑）。     

Geochemistry and mineralogy of the NW Aegean Sea surface sediments: implications for river runoff and anthropogenic impact

Surface sediments of the NW Aegean Sea were analyzed for clay mineral composition (94 samples), organic C and carbonate content, and major and minor elements (112 samples). Illite is the most abundant clay mineral, followed by smectite, chlorite and kaolinite. Clay minerals are preferentially deposited within the continental shelf and slope environment, due to the prevailing cyclonic circulation and the formation of flocs in the rivers’ pro-delta areas. The spatial distribution of major lithogenic elements (Si, Al, Ti, Fe) is substantially biased by the presence of relict sands located in the central-eastern part of the Thermaikos Gulf continental shelf. Biogenic elements (Ca, Sr) are noticeably pronounced on the northern flank of the North Sporades Islands. Organic C content and minor elements Cu, Zn, As and Pb are enriched markedly over the Thessaloniki Bay and Gulf suggesting substantial human impact, deriving largely from untreated or partly treated domestic and industrial effluents. The terrigenous component of the elements is preferentially contributed from the Axios River (Zn and Pb), the Aliakmon River (Cr, Co, Ni, Cu and As), and to a lesser extent from the Pinios River (V, Co, Ni and Cu); a considerable part of the metals originates in ultra-mafic and volcanic formations, which are abundant in the rivers’ catchment basins. Carbonate content exhibits great variability, with the highest values observed in biogenic sediments of the Sporades Basin. In the latter area, Mn (and Fe) oxides and hydroxides were found as coatings on calcite. The coatings were enriched in Cr, Co, Ni, Zn, As, Mo and Pb, due to adsorption or ion-exchange during early diagenesis. The combined influence of the river systems, the Thessaloniki metropolis, and the diverse sedimentological background, generates great patchiness in the distribution of major and minor elements.     

Concentration distribution and assessment of several heavy metals in sediments of west-four Pearl River Estuary

Grain size parameters, trace metals (Co, Cu, Ni, Pb, Cr, Zn, Ba, Zr and Sr) and total organic matter (TOM) of 38 surficial sediments and a sediment core of west-four Pearl River Estuary region were analyzed. The spacial distribution and the transportation procession of the chemical element in surficial sediments were studied mainly. Multivariate statistics are used to analyses the interrelationship of metal elements, TOM and the grain size parameters. The results demonstrated that terrigenous sediment taken by the rivers are main sources of the trace metal elements and TOM, and the lithology of parent material is a dominating factor controlling the trace metal composition in the surficial sediment. In addition, the hydrodynamic condition and landform are the dominating factors controlling the large-scale distribution, while the anthropogenic input in the coastal area alters the regional distribution of heavy metal elements Co, Cu, Ni, Pb, Cr and Zn. The enrichment factor (EF) analysis was used for the differentiation of the metal source between anthropogenic and naturally occurring, and for the assessment of the anthropogenic influence, the deeper layer content of heavy metals were calculated as the background values and Zr was chosen as the reference element for Co, Cu, Ni, Pb, Cr and Zn. The result indicate prevalent enrichment of Co, Cu, Ni, Pb and Cr, and the contamination of Pb is most obvious, further more, the peculiar high EF value sites of Zn and Pb probably suggest point source input.     

Heavy metals in mangrove sediments of the central Arabian Gulf shoreline,Saudi Arabia

To assess heavy metals in mangrove swamps of Sehat and Tarut coastal areas along the Arabian Gulf, 18 sediment samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis. The results indicated that the distribution of some metals was largely controlled by anthropogenic inputs, while others were of terrigenous origin and most strongly associated with distribution of aluminum and total organic carbon in sediments. Mangrove sediments were extremely severe enriched with Sr (EF?=?67.59) and very severe enriched with V, Hg, Cd, Cu, As (EF?=?44.28, 37.45, 35.77, 25.97, and 11.53, respectively). Average values of Sr, V, Hg, Cd, Cu, Ni, As, and Cr were mostly higher than the ones recorded from the Mediterranean Sea, the Red Sea, the Gulf of Aqaba, the Caspian Sea, the Arabian and Oman gulfs, coast of Tanzania, sediment quality guidelines, and the background shale and the earth crust. Landfilling due to coastal infrastructure development around mangrove forests, oil spills and petrochemical and desalination effluents from Al-Jubail industrial city to the north were the anthropogenic activities that further enhanced heavy metals in the studied mangrove sediments.     

Distribution and immobilization of heavy metals in Pliocene aquifer sediments in Wadi El Natrun depression, Western Desert

The Pliocene aquifer receives inflow of Miocene and Pleistocene aquifer waters in Wadi El Natrun depression. The aquifer also receives inflow from the agricultural activity and septic tanks. Nine sediment samples were collected from the Pliocene aquifer in Wadi E1 Natrun. Heavy metal (Cu, Sr, Zn, Mn, Fe, Al, Ba, Cr, Ni, V, Cd, Co, Mo, and Pb) concentrations of Pliocene aquifer sediments were investigated in bulk, sand, and mud fractions. The determination of extractable trace metals (Cu, Zn, Fe, Mn, and Pb) in Pliocene aquifer sediments using sequential extraction procedure (four steps) has been performed in order to study environmental pathways (e.g., mobility of metals, bounding states). These employ a series of successively stronger chemical leaching reagents which nominally target the different compositional fractions. By analyzing the liquid leachates and the residual solid components, it is possible to determine not only the type and concentration of metals retained in each phase but also their potential ecological significance. Cu, Sr, Zn, Mn, Fe, and Al concentrations are higher in finer sediments than in coarser sediments, while Ba, Cr, Ni, V, Cd, Co, Mo, and Pb are enriched in the coarser fraction. The differences in relative concentrations are attributed to intense anthropogenic inputs from different sources. Heavy metal concentrations are higher than global average concentrations in sandstone, USEPA guidelines, and other local and international aquifer sediments. The order of trace elements in the bulk Pliocene aquifer sediments, from high to low concentrations, is Fe?>?Al?>?Mn?>?Cr?>?Zn?>?Cu?>?Ni?>?V?>?Sr?>?Ba?>?Pb?>?Mo?>?Cd?>?Co. The Pliocene aquifer sediments are highly contaminated for most toxic metals, except Pb and Co which have moderate contamination. The active soluble (F0) and exchangeable (F1) phases are represented by high concentrations of Cu, Zn, Fe, and Mn and relatively higher concentrations of Pb and Cd. This may be due to the increase of silt and clay fractions (mud) in sediments, which act as an adsorbent, retaining metals through ion exchange and other processes. The order of mobility of heavy metals in this phase is found to be Pb?>?Cd?>?Zn?>?Cu?>?Fe?>?Mn. The values of the active phase of most heavy metals are relatively high, indicating that Pliocene sediments are potentially a major sink for heavy metals characterized by high mobility and bioavailability. Fe–Mn oxyhydroxide phase is the most important fraction among labile fractions and represents 22% for Cd, 20% for Fe, 11% for Zn, 8% for Cu, 5% for Pb, and 3% for Mn. The organic matter-bound fraction contains 80% of Mn, 72% of Cu, 68% of Zn, 60% of Fe, 35% of Pb, and 30% of Cd (as mean). Summarizing the sequential extraction, a very good immobilization of the heavy metals by the organic matter-bound fraction is followed by the carbonate-exchangeable-bound fraction. The mobility of the Cd metal in the active and Fe–Mn oxyhydroxide phases is the highest, while the Mn metal had the lowest mobility.     

Environmental geochemistry of El Temsah Lake sediments, Suez Canal district, Egypt

The heavy metal contents of Mn, Ni, Cu, Zn, Cr, Co, Pb, Cd, Fe, and V in the surface sediments from five selected sites of El Temsah Lake was determined by graphite furnace atomic absorption spectrophotometer. Geochemical forms of elements were investigated using four-step sequential chemical extraction procedure in order to identify and evaluate the mobility and the availability of trace metals on lake sediments, in comparison with the total element content. The operationally defined host fractions were: (1) exchangeable/bound to carbonate, (2) bound to Fe/Mn oxide, (3) bound to organic matter/sulfides, and (4) acid-soluble residue. The speciation data reveals that metals Zn, Cd, Pb, Ni, Mn, Cu, Cr, Fe, and V are sink primarily in organic and Fe–Mn oxyhydroxides phases. Co is mainly concentrated in the active phase. This is alarming because the element is enriched in Al Sayadin Lagoon which is still the main site of open fishing in Ismailia. Average concentration of the elements is mostly above the geochemical background and pristine values of the present study. There is a difference on the elemental composition of the sediment collected at the western lagoon (Al Sayadin Lagoon), junction, the shoreline shipyard workshops, and eastern beach of the lake. Depending upon the nature of elements and local pollution source, high concentration of Zn, Pb, and Cu are emitted by industrial wastewater flow (shoreline workshops), while sanitary and agricultural wastewater (El Bahtini and El Mahsama Drains) emit Co and Cd in Al Sayadin Lagoon. On the other hand, there is a marked decrease in potentially toxic heavy metal concentrations in the sediments at the most eastern side of the lake, probably due to the successive sediment dredging and improvements in water purification systems for navigation objective. These result show that El Temsah receives concentrations in anthropogenic metals that risk provoking more or less important disruptions, which are harmful and irreversible on the fauna and flora of this lake and on the whole ecobiological equilibrium.     

Multivariate statistical techniques for evaluating and identifying the environmental significance of heavy metal contamination in sediments of the Yangtze River, China

The concentrations of heavy metals (Cr, Co, Ni, Cu, Zn, Pb, Cd, As, Hg, and Fe) in sediments of the Yangtze River, China, were investigated to evaluate levels of contamination and their potential sources. The lowest heavy metal concentrations were found in the source regions of the river basin. Relatively high concentrations of metals, except Cr, were found in the Sichuan Basin, and the highest concentrations were in the Xiangjiang and Shun’anhe rivers. All concentrations, except Ni, were higher than global averages. Principal component analysis and hierarchical cluster analysis showed that Zn, Pb, As, Hg, and Cd were derived mainly from the exploitation of various multi-metal minerals, industrial wastewater, and domestic sewage. Cu, Co, and Fe were derived mainly from natural weathering (erosion). Cr and Ni were derived mainly from agricultural activities, municipal and industrial wastewater. Sediment pollution was assessed using the geoaccumulation index (I _geo) and enrichment factor (EF). Among the ten heavy metals assessed, Cd and Pb had the highest I _geo values, followed by Cu, As, Zn, and Hg. The I _geo values of Fe, Cr, Co, and Ni were <0 in all sediments. EF provided similar information to I _geo: no enrichment was found for Cr, Co, and Ni. Cu, Zn, As, and Hg were relatively enriched at some sites while Cd and Pb showed significant enrichment.     

Geochemistry of surface sediments in the southwestern East/Japan Sea

We analyzed 77 surface sediment samples collected in the southwestern East/Japan Sea from the Korea Strait through the Ulleung Basin and the Korea Plateau for grain size, calcium carbonate, organic carbon, and major (Na, Mg, Al, Fe, K, Ca, and Ti) and trace elements (P, Mn, Sr, Li, Sc, V, Cr, Co, Ni, Zn, Cu, and Pb).The chemical composition of the surface sediments was found to be highly variable spatially. Cluster analysis of surface sediment chemical compositions indicated five major geochemical sedimentary environments: basin, lower slope, coast and upper slope, inner shelf, and outer shelf. Continental-shelf sediments were rich in shell fragments and had relict and coarse-grained characteristics. Recent fine-grained sediments were only distributed in coastal, slope, and basin areas. Concentrations of Al, K, Ca, Ti, Cr, and Sc were highest in the coastal and upper slope areas and decreased with water depth. Elemental ratios using major and trace elements indicated that coastal and upper slope detrital sediments were mixtures of sediments derived from the Changjiang (Yangtze) and Nakdong Rivers. Although the concentrations of organic carbon, P, Mn, V, Co, Ni, Cu, and Pb increased with water depth, their distribution patterns indicated authigenic (V, Cu, and Pb) and diagenetic (Fe, P, Mn, Co, and Ni) origins. The distribution pattern with water depth suggested that the chemical composition of surface sediment was determined by sedimentologic and geochemical processes, such as the supply of detrital and biogenic materials, and authigenic and post-depositional diagenetic processes in sediments.     

南极普里兹湾表层沉积物微量元素分布特征及其物源指示意义

利用电感耦合等离子体质谱仪测定了中国南极科考21~27航次期间获取的普里兹湾表层沉积物中Cu、Pb、Zn、Cd、Cr、Co、Al、Fe、Mn的含量,分析了普里兹湾微量元素的分布特征,结合沉积物粒度分布、生物硅含量,并利用富集系数和主成分分析的方法,探讨了微量元素的物源指示意义。研究结果表明:普里兹湾沉积物中的微量元素含量与南大洋其他海域具有很好的可比性。Cu、Zn、Cr、Co、Fe、Mn含量在陆坡深海区明显高于冰架边缘区和陆架区;Al、Pb含量在冰架边缘区较高;而Cd含量在陆架区相对较高。人类活动对普里兹湾沉积物中的微量元素没有明显的影响,南极大陆岩石风化产物和海洋生物源性沉降是其主要来源。冰架边缘区及陆架破折处P2-9站位的微量元素主要为岩源性输入。陆架区、陆坡深海区的微量元素Cu、Zn、Cr、Co、Fe、Mn明显受到生源性物质输入的影响。而普里兹湾沉积物中Cd则主要来源于硅藻的吸收利用及硅质软泥的富集。     

Environmental contamination of trace elements in the vicinity of Okpara coal mine, Enugu, Southeastern Nigeria

Water, sediment, and mine spoil samples were collected within the vicinity of the Okpara coal mine in Enugu, Southeastern Nigeria, and analyzed for trace elements using ICP-MS to assess the level of environmental contamination by these elements. The results obtained show that the mine spoils and sediments are relatively enriched in Fe, with mean values of 1,307.8(mg/kg) for mine spoils and 94.15% for sediments. As, Cd, Cr, Mn,Ni, Pb, and Zn in the sediments were found to be enriched relative to the mean values obtained from the study area, showing contamination by these elements. The mean values of Fe, Mn, Cu, and Cr in the mine spoils and mean values of Fe, Cu, Pb, Zn, Ni, Cr, and Mn in sediments, respectively, are above the background values obtained from coal and shale in the study area, indicating enrichment with these elements. The water and sediments are moderately acidic, with mean pH values of 4.22?±?1.06 and 4.66?±?1.35, respectively. With the exception of Fe, Mn, and Ni, all other elements are within the Nigerian water quality standard and WHO limits for drinking water and other domestic purposes. The strong to moderate positive correlation between Fe and Cu (r?=?0.72), Fe and Zn (r?=?0.88), and Fe and As (r?=?0.60) at p?<?0.05 as obtained for the sediments depict the scavenging effect of Fe on these mobile elements. As also shows a strong positive correlation with Mn (r?=?≥ 0.70, p?<?0.05), indicating that Mn plays a major role in scavenging elements that are not co-precipitated with Fe. In water, the strong positive correlation observed between Cr and Cd (r?=?1.00), Cu and Ni (r?=?0.94), Pb and Cu (r?=?0.87) and Zn and Cu (r?=?0.99); Ni and Pb (r?=?0.83) and Zn and Ni (r?=?0.97); and between Pb and Zn (0.84) at p?<?0.05 may indicate similar element–water reaction control on the system due to similarities in chemical properties as well as a common source. Elevated levels of heavy metals in sediments relative to surface water probably imply that sorption and co-precipitation on Al and Fe oxides are more effective in the mobilization and attenuation of heavy metals in the mine area than acid-induced dissolution. The level of concentration of trace elements for the mine spoils will serve as baseline data for future reference in the study area.     

冲绳海槽南部表层沉积物地球化学特征及其物源和环境指示意义

对冲绳海槽南部陆架、陆坡和海槽 33个表层沉积物进行了元素地球化学分析,结果表明研究区沉积物的主要化学组成为SiO₂ 、Al₂ O₃ 和CaO,这三种组分占沉积物总量的 6 8%左右。多数元素在陆架和陆坡的变化范围较大,在海槽区相对稳定。向海槽方向随沉积物粒径变细,SiO₂ 和CaO减少、Al₂ O₃ 和其它多数元素含量增加。常量元素和Al₂ O₃ 的比值分布特征表明,本区沉积物由物源区经由陆架向海槽输送,沉积物主要由陆源碎屑沉积组成,此外还有生物碎屑沉积和自生沉积。陆架区部分微量元素富集因子 (EF)与长江和黄河沉积物的富集因子对比结果表明,本区的沉积物与长江沉积物的关系更为密切。陆坡区Cu、Pb、Zn、Co、Ni和Cr的富集因子较高是由于生物的富集作用造成的,Mn的富集主要是自生沉积的结果。用R型因子分析方法对沉积物的化学组成进行了分析,结合元素的分布特征,给出了四个主因子所对应的沉积环境和特征元素组合,分别为 1)陆架型的元素组合 :SiO₂ 、TiO₂ 、Zr、CaO和Sr,2 )陆坡型的元素组合Fe₂ O₃ 、MgO和P₂ O₅,3)海槽型的元素组合 :Al₂ O₃ 、K₂ O、Cu、Zn、Co、Ni、Cr和Ba,4 )反映沉积环境氧化-还原属性的元素组合 :MnO和FeO。     

Geochemistry of two sediment cores from the west coast of India

Copper, Pb, Zn, Ni, Co, Mn, AI, Ca, magnetic susceptibility and loss on ignition of sediments from two cores near Mangalore along the western continental shelf of India have been studied. The sediments have high Al and organic matter contents due to the high sedimentation rate and their proximity to river mouths. Down-core variations of elements indicate a decrease of lithogenous component during probably the past few centuries. While abundance of calcareous shells in some zones has lead to the dilution of most of the metals, it appears that Pb and Mn are associated with this phase. Copper, Zn and Fe are associated with organic matter and detrital particles, whereas Ni and Co are predominantly associated with the insoluble fraction. Oxides/hydroxides of Fe and Mn are absent because of the reducing conditions and the high terrigenous influx. Geochemically, Mn and Fe are present in different phases of sediments (in the insoluble fraction and organic matter respectively). The Fe content of one of the cores is positively correlated with magnetic susceptibility.     

Plankton: Its chemical composition and its significance as a source of pelagic sediments

The absolute concentrations of minor and trace elements vary considerably in plankton. However, normalization of elemental abundances versus the minor elements Fe, Al and Zn (instead of the commonly used normalization versus seawater concentrations) demonstrates that these elements show remarkably constant proportions vis à vis each other. Thus, Ti, Fe, Al, Mn, V, and Zr occur in marine lower organisms in the same proportions as in the average shale, whereas Ba, Cr, Cu, Ni, Cd, Pb, Zn and B are enriched relative to the shale abundances, as are also Ca, Mg, Na, K, and Sr. These patterns appear to suggest that marine plankton are rich in lithogenic matter, but this is probably not the normal case.Contrary to the uniformity of plankton, sediments from the Pacific vary considerably in composition. Under the Equatorial high-productivity region the sediments show striking similarities with a mixture of average shale and average plankton mass, as could be expected, whereas sediments from the East Pacific Rise differ considerably from such mixtures. An iron—manganese phase (of deep-seated origin?), mixed with biological matter, on the other hand, yields model sediments with remarkable similarities to the East Pacific Rise deposits. It is therefore likely that biological processes account for a considerable fraction of some elements such as Cu, Ni, Zn and Ba also in the East Pacific Rise metalliferous sediments.     

Remobilization of transition metals in surficial pelagic sediments from the eastern Pacific

The top thirty centimeters of sediment at two sites in the eastern equatorial Pacific contain evidence of post-depositional remobilization of Mn, Fe, Co, Ni, Cu, and Zn. Remobilization takes place as Mn and Fe oxyhydroxides are released to the pore water during the microbially-mediated decomposition of organic matter. Precipitation of the dissolved metals in near-surface more oxic strata controls the solid-phase distribution of Mn, Fe, and Zn. The solid-phase redistribution of Co and Ni requires only suitable material for readsorption. Comparison of pore water fluxes with solid-phase metal distributions in the solid sediment indicates no loss of dissolved metal to the overlying water column at the present time. Loss of Mn during the Quaternary is indicated by the composition of the sediments, however. Leaching experiments suggest that portions of the mobile Mn, Fe, Co, Ni, and Cu are fixed by incorporation in authigenic smectite in the surficial sediments.     

Heavy metal distribution in the surface layer of bottom sediments of the Kara Sea

This paper addresses the distribution of heavy metals (Co, Ni, Cu, Zn, Cd, Sn, Sb, Pb, and Bi) as well as Si, Al, Fe, and Mn in the surface (0–2 cm) layer of bottom sediments of the Kara Sea. The contents of these elements are determined in each of the previously distinguished facies-genetic types of terrigenous sediments: fluvial, glacial, estuarine, shallow water–marine, “background” marine, and relict sediments. It is shown that these types reflect the modern conditions of accumulation of river discharge material, which forms fans of two greatest Siberian rivers, Ob and Yenisei. The main stages are distinguished in heavy metal accumulation. The first stage is related to the avalanche sedimentation of terrigenous sediments in the estuary and characterized by the elevated contents of Co, Ni, Cu, Zn, Cd, Sb, and Bi. The second stage reflects the mechanical differentiation of sedimentary material by waves and bottom currents in a shallow-water sea part adjacent to the estuarine zone, with accumulation of Pb- and Sn-bearing “heavy” ore minerals. The deepwater background terrigenous–marine sediments accumulate mainly Ni, Zn, and Cd, as well as Mn. The relict sediments differ in the high contents of Si, Mn, and Sn.     

Effect of Phosphatization on Element Concentration of Cobalt-Rich Ferromanganese Crusts

1 Introduction Co-rich ferromanganese crusts occurring on submarine guyots have received much attention from scientists since the beginning of the 1980’s because they are enriched in Co, Mn, Pt, and rare earth elements (REEs), and have large potential mineral resources, occurring as they do on topographic highs relative to polymetallic nodules in the C-C (Clarion-Clipperton) zone (Halbach et al., 1982, 1989; Hein et al., 1992, 1999; Usui and Someya, 1997; Yamazaki and Sharma, 1998, 2000…     

Status of anthropogenically induced metal pollution in the Kanpur-Unnao industrial region of the Ganga Plain, India

 The Ganga Plain is one of the most densely populated regions and one of the largest groundwater repositories of the Earth. For several decades, the drainage basin of the Ganga Plain has been used for the disposal of domestic and industrial wastes which has adversely affected the quality of water, sediments and agricultural soils of the plain. The concentrations of Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, Sn, Zn and organic carbon were determined in river sediments and soils of the Ganga Plain in the Kanpur-Unnao industrial region in 1994 and 1995 (pre-monsoon period of April–May). High contents (maximum values) of C-org (12.0 wt. %), Cr (3.40 wt. %), Sn (1.92 wt. %), Zn (4000 mg/kg), Pb (646 mg/kg), Cu (408 mg/kg), Ni (502 mg/kg) and Cd (9.8 mg/kg) in sediments (<20 μm fraction); and C-org (5.9 wt. %), Cr (2.16 wt. %), Sn (1.21 wt %), Zn (975 mg/kg) and Ni (482 mg/kg) in soils (<20 μm) in the pre-monsoon period of 1994 were found. From 1994 to 1995 the contents of Fe and Sn in sediments increase whereas those of C-org, Cd, Cu, Ni and Zn decrease. Considering the analytical errors, Al, Co, Cr, Mn and Pb do not show any change in their concentrations. In soils, the contents of Cd, Fe and Sn increase whereas those of Ni decrease from 1994 to 1995. Aluminium, Co, Cr, Cu, Mn, Pb and Zn do not show any change in their concentrations from 1994 to 1995. About 90% of the contents of Cd, Cr and Sn; 50–75% of C-org, Cu and Zn; and 25% of Co, Ni and Pb in sediments are derived from the anthropogenic input in relation to the natural background values, whereas in soils this is the case for about 90% of Cr and Sn; about 75% of Cd; and about 25% of C-org, Cu, Ni and Zn. The sediments of the study area show enrichment factors of 23.6 for Cr, 14.7 for Cd, 12.2 for Sn, 3.6 for C-org, 3.2 for Zn, 2.6 for Cu and 1.6 for Ni. The soils are enriched with factors of 10.7 for Cr, 9.0 for Sn, 3.6 for Cd, 1.8 for Ni and 1.5 for Cu and Zn, respectively. Received: 3 March 1998 · Accepted: 15 June 1998     

Heavy metals contamination in road dust in Delhi city,India

Road dust samples were collected from four different areas having different landuse patterns: industrial, heavy traffic, residential and mixed use in Delhi city of India. The samples were analyzed for Ba, Co, Cr, Cu Fe, Mn, Ni, Pb and Zn by ICP-AES. Results indicate high levels of Co, Cr, Cu, Mn and Ni in samples collected from industrial area. Ba, Pb and Zn showed higher concentration levels in heavy traffic area while Fe did not show any discernible variation between the localities. The concentrations of Fe, Mn, Ba, Zn, Cr, Cu, Pb, Ni and Co showed a decreasing trend. The content of heavy metals was comparable to those in other cities in the world. A multivariate statistical approach which includes Pearson’s correlations and principal component analysis was used to identify the possible sources of metals in the road dust. Enrichment factors were estimated for further confirming the sources of contamination. Significant positively correlations between road dust metals Cu–Mn–Co–Cr–Ni suggest that major common source of origin is industrial activities. A meaningful correlation between Ba and Zn, and a moderate positive correlation between Pb and Ba indicate the influence of traffic activities. Enrichment factors calculation indicated that Pb, Cu, Cr and Zn are moderately enriched whereas Co, Ni and Mn are less enriched while Ba exhibited very low enrichment in the dust samples. The results indicate that industrial and vehicular traffic are the two major sources. Traffic appears to be responsible for the high levels of Zn, Cu and Ba. High concentration of Co, Cr, Cu and Mn may be due to industrial sources.     

Surface metal enrichment and partitioning of metals in a dated sediment core from a Norwegian fjord

A 24-cm long sediment core from an oxic fjord basin in Ranafjord, Northern Norway, was sliced in 2 cm sections and analysed for As, Co, Cu, Ni, Hg, Pb, Zn, Mn, Fe, ignition loss and Pb-210. Partitioning of metals between silicate, non-silicate and non-detrital phases was assessed by leaching experiments, in an attempt to understand the mechanisms of surface metal enrichment in sediments. Relative to metal concentrations in sediments deposited in the 19th century, metals in near surface sediments were enriched in the following order: Pb > Mn > Hg > Zn > Cu > As > Fe. Cobalt and Ni showed no enrichment. The non-detrital fraction of Cu, Pb, Mn and Zn was significantly higher in the upper 10 cm than at greater depth in the core. This corresponds to sediments deposited since 1900, when mining activities started in the area. The enrichment of Cu, Pb and Zn is assumed to be mainly a result of mining, while Mn is apparently enriched in the surface due to migration of dissolved Mn and precipitation in the oxic surface layer. Elevated concentrations of As and Fe in the upper 4 cm are presumably due to discharges from a coke plant and an iron works respectively. The excess Hg present in the near surface sediments is tightly bound, either in coal particles or ore dust introduced by local industry, or via long distance transport of atmospheric particles. Calculations of metal flux to the sediments indicate an anthropogenic flux of Zn equal to its natural flux, while the flux of Pb shows a threefold increase above natural input.