曾家垅含锡矿物特征及地质意义

作者通过对曾家垅含锡矿物特征及赋存状态的分析认为，曾家垅含锡独立矿物以锡石为主，次为马来亚石及黄锡矿。在华南锡成矿带中，马来亚石的矿物组合在曾家垅锡矿床中首次发现，读矿物组合在岩浆期后不同的成矿阶段各具特色。矽卡岩晚期高温氧化物阶段和石英硫化物阶段早期是锡石、马来亚石的主要成矿期，所晶出的大量锡石构成了曾家垅锡矿床的主体。     

Characteristics of fluid inclusions and metallogenic mechanism of the Longshang skarn type tin polymetallic deposit in eastern Hunan Province,ChinaSCIEI北大核心CSCD

矽卡岩型锡矿是全球重要的锡金属来源,但是锡石沉淀成矿机制仍存在较大的争议。垄上矽卡岩型锡矿床位于湘东锡田锡多金属矿田中部,是南岭钨锡成矿带内矽卡岩型锡矿的典型代表。本文在野外考察、矿石矿相学、流体包裹体岩相学研究的基础上,采用流体包裹体组合法对垄上矽卡岩矿床不同矿化阶段代表矿物中的流体包裹体进行了详细研究。结果显示,垄上矽卡岩型多金属矿床成矿阶段可划分为矽卡岩阶段、退化蚀变阶段、云英岩-氧化物阶段、石英硫化物阶段以及萤石碳酸盐化等5个阶段,其中,锡石主要形成于云英岩-氧化物阶段。与锡石密切共生的石英中发育流体包裹体类型主要为富液相、富气相两相水溶液包裹体,含液相CO_(2)三相水溶液包裹体和纯CO_(2)型包裹体。流体温度和盐度具有较大的变化范围(200-400℃和2%-9%NaCleqv),指示流体在降温过程中经历了显著的不混溶。与硫化物共生的石英中主要为富液相两相水溶液包裹体,温度和盐度主要集中在190-261℃和3%-7%NaCleqv,指示流体冷却过程同时经历了流体混合。本次研究提出锡田矽卡岩型矿床中流体不混溶是导致云英岩-氧化物阶段锡石沉淀成矿的主要机制,而流体冷却和混合是导致硫化物沉淀的主要原因。     

湖南香花岭矽卡岩中锡的矿物学行为与成矿过程

湖南香花岭矽卡岩型锡矿床是南岭地区一个重要的锡多金属矿床,发育有丰富的含锡矿物。在野外和显微镜下观察 基础上,文章利用电子探针技术系统分析了香花岭矽卡岩中含锡矿物的矿物学特征,探讨了锡的成矿过程、成矿流体以及 锡的来源。研究结果表明,香花岭矽卡岩中含锡矿物由锡矿物（锡石、尼日利亚石、孟宪民石等）和富锡矿物（韭闪石、 尖晶石、葡萄石、塔菲石等）组成。锡的成矿有三个阶段：矽卡岩早阶段,Sn进入尖晶石、韭闪石等造岩矿物中,形成富 锡矿物;氧化物阶段,锡矿物如锡石、尼日利亚石、孟宪民石等逐渐晶出;晚期热液阶段,早期含锡矿物热液蚀变原位析 出锡石,或富Sn热液交代早期矿物形成了富锡环边。矽卡岩中成矿流体富含F,CO2,Li等挥发组分,控制了Sn的富集、迁 移、结晶等过程。香花岭矽卡岩中Sn根本上来源于地层,锡的成矿过程反映了Sn在地壳中的地球化学循环过程。     

南天山独山锡矿床的成矿特征及成矿模式

通过对渗沙水锡矿点宏、微观研究，否定了原矽卡岩型锡矿的成因观点，提出锡矿化与早二叠世末碱长花岗岩侵入和热液充填交代有关，矿化受断裂破碎构造控制。以此新观点为指导，我们在南天山东段首次发现了与早二叠世末钾长花岗斑岩有关的成型锡矿床－独山锡矿床。从蚀变、矿期活动及矿石中锡的存在形式等方面对该矿床进行了详细研究，确定了该矿床的形成包括锡石－泥晶碳酸盐充填交代、锡石－石英－铁矿物充填及锡石－石英－硫化物充填3个成矿阶段。根据稳定同位素、稀土特征对矿床成因进行了探讨，并建立了矿床成矿模式。     

腾冲—梁河地区来利山锡矿床成因类型探讨

来利山锡矿床是滇西锡矿带西亚带的一种主要的矿床类型。本文根据该矿床的矿体产状、矿石成分、矿石矿物微量元素、成矿溶液成分等方面所反映出锡矿化与黄铁矿化间的密切关系,认为该矿床虽有两种类型—多金属硫化物云英岩型和锡石-石英黄铁矿型,前者见于已有资料和文献,而主体部分则应属于后者,即岩浆期后热液成因的锡石-硫化物型大类的锡石-石英黄铁矿亚型。     

内蒙古大井锡多金属矿床锡矿物特征

大井锡多金属矿床含锡矿物为锡石和黄锡矿,产于3个成矿阶段和5种矿石类型中.从早到晚,即韧性变形阶段→锡石-毒砂-石英阶段→锡石-硫化物阶段(或黄铜矿-黄铁矿阶段),主要含锡矿物锡石的化学成分,表现出SnO2逐渐升高而FeO、TiO2、Nb2O5、Ta2O5和In2O5依次跳跃式递减的特征,同时NiO和Ga2O5趋于升高.与一般脉状锡矿床相比,早阶段锡石富Ta而晚阶段锡石富Ti、Fe,表明早期的锡石更接近花岗质岩浆源特征而晚期锡石则明显具层控性质.锡石的组分变化特征与各阶段(内)从早到晚成矿温度递减有关.另一含锡矿物黄锡矿含As、Zn较高,仅出现于锡石-硫化物阶段,并在温度为220℃～320℃、硫逸度为10-10.04×105～10-13.44×105Pa的特定区间内淀出.两个阶段锡石的稀土元素特征分别与矿区次火山岩和林西组地层一致,表明早期锡石-毒砂-石英阶段中的锡主要来自次火山岩(如英安斑岩),而晚期锡石-硫化物阶段中的锡可能主要来自林西组围岩(如粉砂岩).     

中国锡矿成矿规律概要

我国锡矿资源丰富,矿床类型比较齐全。在锡矿资源储量中占有较大比重的主要是锡石—硫化物型、矽卡岩型和石英脉型;从开采和利用角度来说,最为重要的是锡石—硫化物型和石英脉型。锡石—硫化物型主要集中在桂北、滇东等地,矽卡岩型集中分布在南岭中段湘南等矿集区、石英脉型则主要集中在华南地区的闽西、赣中、粤北、湘南等地;成矿时代以中生代最为重要;成矿大地构造背景以造山运动之后的大陆环境为主,构造变动剧烈,深大断裂纵横交错,岩浆活动频繁,特别是与锡成矿作用关系密切的中生代花岗岩类非常发育,最具特色。本次在对全国873处锡矿矿产地资料进行系统梳理的基础上,深入总结了全国锡矿的成矿规律,厘定出20个以锡为主或锡较为重要的矿床成矿系列,认为锡石—硫化物型、矽卡岩(—云英岩型)、石英脉型和岩体型4类锡矿类型,应该作为重点预测类型,并划分出44个成锡带,提出了19个重要工作部署区,并编制了中国成锡带图、中国锡矿成矿规律图等系列图件,为潜力评价预测工作提供了理论依据。     

广西大厂矿田高峰锡多金属矿床流体包裹体研究

广西大厂锡多金属矿田是世界著名的锡矿产地之一。矿田内绝大部分锡锌资源量分布在西成矿带的高峰和长坡-铜坑两个矿床之中,其中赋存在中泥盆统生物礁灰岩中的高峰100号体以其品位高(Sn 1. 79%、Zn 10. 1%、Pb 5. 21%、Sb4. 8%、Ag 235g/t)、规模大(矿石量超过1300万吨)而在整个大厂矿田中占据非常重要的地位。本文在扫描电镜-阴极发光(SEM-CL)图像分析的基础上,对高峰锡多金属矿床成矿早期锡石-毒砂-磁黄铁矿阶段和成矿晚期硫化物-硫盐-碳酸盐阶段的流体包裹体岩相学、显微测温学及其气相成分的激光Raman光谱进行了系统研究。结果表明,成矿早期锡石-毒砂-磁黄铁矿阶段石英和锡石中主要发育富含CO2和CH4气相流体包裹体,其均一温度和盐度分别为360～410℃和3%～6%Na Cleqv;成矿晚期硫化物-硫盐-碳酸盐阶段石英中则仅发育气-液两相盐水流体包裹体,具有相对低的均一温度(270～310℃)和盐度(3%～6%Na Cleqv)。石英和锡石的H-O同位素组成指示成矿流体主要来源于岩浆热液。对比矿田内其他矿床,进一步发现高峰矿床富CO2气相流体的盐度(3%～6%Na Cleqv)与拉么矽卡岩型Zn-Cu矿床富CO2气相流体的盐度(7%～9%Na Cleqv)相近,认为高峰矿床与拉么矿床可能具有相同的成矿流体来源,两者均来源于深部岩浆房中分异出的超临界流体。高峰矿床成矿流体可能主要来源于深部矽卡岩阶段富CO2气相流体的压缩和冷却(vapor contraction and cooling)。流体冷却过程可能是锡石-硫化物成矿的主要控制因素。高峰矿床-200m中段以上矿体,锡石和石英中的流体包裹体以富CO2和CH4气相流体包裹体为主,而缺失多子晶流体包裹体组合,推测高峰矿床-200m中段以下可能存在富含成矿金属的高密度卤水,从而形成高品位的锡多金属脉状矿体或矽卡岩型Zn-Cu矿体。     

粤东莲花山地区锡矿矿产类型

锡矿是粤东优势矿种之一。在收集分析粤东莲花山地区61个锡矿床（点）成矿特征的基础上,对该地区锡矿床（点）矿产类型进行划分归类,建立了粤东莲花山地区锡矿工业类型,主要有为锡石-硫化物型、锡石-硅酸盐型、锡石-石英脉型、斑岩型4类;对4种不同类型锡矿床所具有的矿物组合进行归纳,并开展各类型代表性矿床综合研究,初步构建了4个类型代表性矿区的成矿模式图,为粤东地区锡矿研究提供了基础资料。     

矽卡岩锡矿石中锡的赋存状态与锡物相

锡矿物约有六十种,含锡矿物约有二十种。胶态锡是化学物相的概念,是指能溶于１∶３的硫酸中的各类矿物中的锡。它不是某一矿物物相。木锡石、胶状锡石均为锡石的一种,水锡石则是研究得不很清楚的一种矿物。硅酸盐矿物和磁铁矿中都存在类质同象态锡。根据锡矿物和含锡矿物的特性,将矽卡岩锡矿石中的锡分成氧化物相、硫化物相、水锡石相、硅酸锡相四个化学物相,它们各有相对应的矿物,新的化学物相方法利于指导选冶生产。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.     

岩石密度和超高压岩石折返速率

在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).