南海及邻区地壳上地幔三维S波速度结构的面波波形反演>.

对南海及邻区中国数字地震台网４个台站接收到的328条长周期地震记录的面波波形进行分块波形反演．分块波形反演把大尺度的优化问题转化为小尺度的优化问题，采用非线性优化方法求解，从而得到南海及邻区22网格划分、从地表深至430ｋｍ 的地壳上地幔三维S波速度结构，并用检验板法进行了分辨率分析．结果表明，海域、岛弧和大陆在速度分布、岩石圈和软流圈存在明显的结构差异．      

Full waveform inversion of SH‐ and Love‐wave data in near‐surface prospecting

We develop a two‐dimensional full waveform inversion approach for the simultaneous determination of S‐wave velocity and density models from SH ‐ and Love‐wave data. We illustrate the advantages of the SH/Love full waveform inversion with a simple synthetic example and demonstrate the method's applicability to a near‐surface dataset, recorded in the village ?achtice in Northwestern Slovakia. Goal of the survey was to map remains of historical building foundations in a highly heterogeneous subsurface. The seismic survey comprises two parallel SH‐profiles with maximum offsets of 24 m and covers a frequency range from 5 Hz to 80 Hz with high signal‐to‐noise ratio well suited for full waveform inversion. Using the Wiechert–Herglotz method, we determined a one‐dimensional gradient velocity model as a starting model for full waveform inversion. The two‐dimensional waveform inversion approach uses the global correlation norm as objective function in combination with a sequential inversion of low‐pass filtered field data. This mitigates the non‐linearity of the multi‐parameter inverse problem. Test computations show that the influence of visco‐elastic effects on the waveform inversion result is rather small. Further tests using a mono‐parameter shear modulus inversion reveal that the inversion of the density model has no significant impact on the final data fit. The final full waveform inversion S‐wave velocity and density models show a prominent low‐velocity weathering layer. Below this layer, the subsurface is highly heterogeneous. Minimum anomaly sizes correspond to approximately half of the dominant Love‐wavelength. The results demonstrate the ability of two‐dimensional SH waveform inversion to image shallow small‐scale soil structure. However, they do not show any evidence of foundation walls.     

基于Born波路径的高斯束初至波波形反演

为了提高表层速度反演精度,本文提出了一种新的波形反演方法.该方法只利用初至波波形信息以减少波形反演对初始模型的依赖性,降低反演多解性与稳定性.由于只利用初至波波形信息,所以该方法利用高斯束计算格林函数和正演波场,以减少正演计算量.为了避免庞大核函数的存储,该方法基于Born波路径,利用矩阵分解算法实现方向与步长的累加计算.将此基于Born波路径的初至波波形反演方法应用于理论模型实验,并与声波方程全波形反演和初至波射线走时层析方法相对比,发现该方法的反演效果略低于全波形反演方法,但明显优于传统初至波射线走时层析方法,而计算效率却与射线走时层析相当.同时,相对于全波形反演,本文方法对初始模型的依赖性也有所降低.     

Offset‐variable density improves acoustic full‐waveform inversion: a shallow marine case study

We have previously applied three‐dimensional acoustic, anisotropic, full‐waveform inversion to a shallow‐water, wide‐angle, ocean‐bottom‐cable dataset to obtain a high‐resolution velocity model. This velocity model produced an improved match between synthetic and field data, better flattening of common‐image gathers, a closer fit to well logs, and an improvement in the pre‐stack depth‐migrated image. Nevertheless, close examination reveals that there is a systematic mismatch between the observed and predicted data from this full‐waveform inversion model, with the predicted data being consistently delayed in time. We demonstrate that this mismatch cannot be produced by systematic errors in the starting model, by errors in the assumed source wavelet, by incomplete convergence, or by the use of an insufficiently fine finite‐difference mesh. Throughout these tests, the mismatch is remarkably robust with the significant exception that we do not see an analogous mismatch when inverting synthetic acoustic data. We suspect therefore that the mismatch arises because of inadequacies in the physics that are used during inversion. For ocean‐bottom‐cable data in shallow water at low frequency, apparent observed arrival times, in wide‐angle turning‐ray data, result from the characteristics of the detailed interference pattern between primary refractions, surface ghosts, and a large suite of wide‐angle multiple reflected and/or multiple refracted arrivals. In these circumstances, the dynamics of individual arrivals can strongly influence the apparent arrival times of the resultant compound waveforms. In acoustic full‐waveform inversion, we do not normally know the density of the seabed, and we do not properly account for finite shear velocity, finite attenuation, and fine‐scale anisotropy variation, all of which can influence the relative amplitudes of different interfering arrivals, which in their turn influence the apparent kinematics. Here, we demonstrate that the introduction of a non‐physical offset‐variable water density during acoustic full‐waveform inversion of this ocean‐bottom‐cable field dataset can compensate efficiently and heuristically for these inaccuracies. This approach improves the travel‐time match and consequently increases both the accuracy and resolution of the final velocity model that is obtained using purely acoustic full‐waveform inversion at minimal additional cost.     

频率域波形反演中与频率相关的影响因素分析

波动方程深度偏移是解决复杂地质体成像的关键技术,基于波动方程的速度建模为其提供更为精确的速度模型.频率域波形反演是目前研究最为广泛的波动方程速度建模方法之一,它推动了波形反演在勘探尺度下的应用.本文通过对频率域波形反演的实现,分析对比了其有效执行过程中与频率相关的影响因素.介绍了时间域的多尺度反演方法在频率域的一种实现方式,对比分析了输入数据的频点带宽和应用的子波频带范围不同时对反演结果的影响.本文通过设计的山地地质模型对频率域波形反演进行了测试和对比,得到的结论为频率域波形反演的有效计算提供了依据和参考.     

The use of low frequencies in a full‐waveform inversion and impedance inversion land seismic case study

Velocity model building and impedance inversion generally suffer from a lack of intermediate wavenumber content in seismic data. Intermediate wavenumbers may be retrieved directly from seismic data sets if enough low frequencies are recorded. Over the past years, improvements in acquisition have allowed us to obtain seismic data with a broader frequency spectrum. To illustrate the benefits of broadband acquisition, notably the recording of low frequencies, we discuss the inversion of land seismic data acquired in Inner Mongolia, China. This data set contains frequencies from 1.5–80 Hz. We show that the velocity estimate based on an acoustic full‐waveform inversion approach is superior to one obtained from reflection traveltime inversion because after full‐waveform inversion the background velocity conforms to geology. We also illustrate the added value of low frequencies in an impedance estimate.     

Crustal velocity structure of central Gansu Province from regional seismic waveform inversion using firework algorithm

The firework algorithm (FWA) is a novel swarm intelligence-based method recently proposed for the optimization of multi-parameter, nonlinear functions. Numerical waveform inversion experiments using a synthetic model show that the FWA performs well in both solution quality and efficiency. We apply the FWA in this study to crustal velocity structure inversion using regional seismic waveform data of central Gansu on the northeastern margin of the Qinghai-Tibet plateau. Seismograms recorded from the moment magnitude (M _W) 5.4 Minxian earthquake enable obtaining an average crustal velocity model for this region. We initially carried out a series of FWA robustness tests in regional waveform inversion at the same earthquake and station positions across the study region, inverting two velocity structure models, with and without a low-velocity crustal layer; the accuracy of our average inversion results and their standard deviations reveal the advantages of the FWA for the inversion of regional seismic waveforms. We applied the FWA across our study area using three component waveform data recorded by nine broadband permanent seismic stations with epicentral distances ranging between 146 and 437 km. These inversion results show that the average thickness of the crust in this region is 46.75 km, while thicknesses of the sedimentary layer, and the upper, middle, and lower crust are 3.15, 15.69, 13.08, and 14.83 km, respectively. Results also show that the P-wave velocities of these layers and the upper mantle are 4.47, 6.07, 6.12, 6.87, and 8.18 km/s, respectively.     

Acoustic full waveform inversion of synthetic land and marine data in the Laplace domain

Elastic waves, such as Rayleigh and mode‐converted waves, together with amplitude versus offset variations, serve as noise in full waveform inversion using the acoustic approximation. Heavy preprocessing must be applied to remove elastic effects to invert land or marine data using the acoustic inversion method in the time or frequency domains. Full waveform inversion using the elastic wave equation should be one alternative; however, multi‐parameter inversion is expensive and sensitive to the starting velocity model. We implement full acoustic waveform inversion of synthetic land and marine data in the Laplace domain with minimum preprocessing (i.e., muting) to remove elastic effects. The damping in the Laplace transform can be thought of as an automatic time windowing. Numerical examples show that Laplace‐domain acoustic inversion can yield correct smooth velocity models even with the noise originating from elastic waves. This offers the opportunity to develop an accurate smooth starting model for subsequent inversion in the frequency domain.     

Full waveform inversion and the truncated Newton method: quantitative imaging of complex subsurface structures

Full waveform inversion is a powerful tool for quantitative seismic imaging from wide‐azimuth seismic data. The method is based on the minimization of the misfit between observed and simulated data. This amounts to the solution of a large‐scale nonlinear minimization problem. The inverse Hessian operator plays a crucial role in this reconstruction process. Accounting accurately for the effect of this operator within the minimization scheme should correct for illumination deficits, restore the amplitude of the subsurface parameters, and help to remove artefacts generated by energetic multiple reflections. Conventional minimization methods (nonlinear conjugate gradient, quasi‐Newton methods) only roughly approximate the effect of this operator. In this study, we are interested in the truncated Newton minimization method. These methods are based on the computation of the model update through a matrix‐free conjugate gradient solution of the Newton linear system. We present a feasible implementation of this method for the full waveform inversion problem, based on a second‐order adjoint state formulation for the computation of Hessian‐vector products. We compare this method with conventional methods within the context of 2D acoustic frequency full waveform inversion for the reconstruction of P‐wave velocity models. Two test cases are investigated. The first is the synthetic BP 2004 model, representative of the Gulf of Mexico geology with high velocity contrasts associated with the presence of salt structures. The second is a 2D real data‐set from the Valhall oil field in North sea. Although, from a computational cost point of view, the truncated Newton method appears to be more expensive than conventional optimization algorithms, the results emphasize its increased robustness. A better reconstruction of the P‐wave velocity model is provided when energetic multiple reflections make it difficult to interpret the seismic data. A better trade‐off between regularization and resolution is obtained when noise contamination of the data requires one to regularize the solution of the inverse problem.     

应用远震有限频率层析成像反演首都圈上地幔速度结构

本文选用首都圈数字地震台网2003年9月~2005年12月记录的300多个远震事件的波形资料,采用分频带多道互相关方法得到三个不同频段的P波相对走时数据共18499个,计算了每个频段的走时灵敏度核,应用有限频率层析成像反演得到首都圈地区的上地幔三维P波速度结构模型.利用检测板估计了反演结果的分辨率,并与射线层析成像方法的结果进行了比较,说明了反演结果的可靠性.研究结果表明,各构造单元具有明显不同的速度结构特征,其差异可到150 km深:燕山隆起区表现高速;太行山隆起区整体以低速为主并存在小范围高速块体;华北盆地、渤海湾下浅层上地幔中存在大范围的强低速异常,其顶面在50~70 km,可视为软流圈顶面的埋深,这一结果说明华北盆地、渤海湾下岩石圈明显减薄;张家口-蓬莱断裂带是上地幔浅部速度结构的变异带,也是岩石圈减薄的边界带,区内大部分强震都发生在该构造带上,由此看来该带上强震的发生不仅与地壳结构的不均匀性有关,还可能有较深的构造背景.     

Correlation‐based reflection waveform inversion by one‐way wave equations

Reflection full waveform inversion can update subsurface velocity structure of the deeper part, but tends to get stuck in the local minima associated with the waveform misfit function. These local minima cause cycle skipping if the initial background velocity model is far from the true model. Since conventional reflection full waveform inversion using two‐way wave equation in time domain is computationally expensive and consumes a large amount of memory, we implement a correlation‐based reflection waveform inversion using one‐way wave equations to retrieve the background velocity. In this method, one‐way wave equations are used for the seismic wave forward modelling, migration/de‐migration and the gradient computation of objective function in frequency domain. Compared with the method using two‐way wave equation, the proposed method benefits from the lower computational cost of one‐way wave equations without significant accuracy reduction in the cases without steep dips. It also largely reduces the memory requirement by an order of magnitude than implementation using two‐way wave equation both for two‐ and three‐dimensional situations. Through numerical analysis, we also find that one‐way wave equations can better construct the low wavenumber reflection wavepath without producing high‐amplitude short‐wavelength components near the image points in the reflection full waveform inversion gradient. Synthetic test and real data application show that the proposed method efficiently updates the background velocity model.     

基于交叉梯度约束的地震初至纵波与瑞雷面波联合反演

本文提出了一种初至纵波(P波)与瑞雷面波的交叉梯度联合反演策略.通过对初至P波进行全波形反演可以获得近地表P波速度结构;通过对仅含瑞雷面波信息的地震数据转换到频率-波数域进行加窗振幅波形反演(Windowed-Amplitude Waveform Inversion,w-AWI)可获得近地表横波(S波)速度结构.在二者反演的目标函数中均加入P波速度和S波速度的交叉梯度作为正则化约束项,使得在反演过程中P波速度和S波速度相互制约,相互约束,从而实现对地震初至P波与瑞雷面波的联合反演.数值模拟结果表明交叉梯度联合反演可以提高S波速度反演分辨率,而P波速度反演结果并没有得到提高.实际资料的反演结果表明,交叉梯度联合反演能够获得更加可信的近地表速度结构.     

Velocity model building from seismic reflection data by full‐waveform inversion

Full‐waveform inversion is re‐emerging as a powerful data‐fitting procedure for quantitative seismic imaging of the subsurface from wide‐azimuth seismic data. This method is suitable to build high‐resolution velocity models provided that the targeted area is sampled by both diving waves and reflected waves. However, the conventional formulation of full‐waveform inversion prevents the reconstruction of the small wavenumber components of the velocity model when the subsurface is sampled by reflected waves only. This typically occurs as the depth becomes significant with respect to the length of the receiver array. This study first aims to highlight the limits of the conventional form of full‐waveform inversion when applied to seismic reflection data, through a simple canonical example of seismic imaging and to propose a new inversion workflow that overcomes these limitations. The governing idea is to decompose the subsurface model as a background part, which we seek to update and a singular part that corresponds to some prior knowledge of the reflectivity. Forcing this scale uncoupling in the full‐waveform inversion formalism brings out the transmitted wavepaths that connect the sources and receivers to the reflectors in the sensitivity kernel of the full‐waveform inversion, which is otherwise dominated by the migration impulse responses formed by the correlation of the downgoing direct wavefields coming from the shot and receiver positions. This transmission regime makes full‐waveform inversion amenable to the update of the long‐to‐intermediate wavelengths of the background model from the wide scattering‐angle information. However, we show that this prior knowledge of the reflectivity does not prevent the use of a suitable misfit measurement based on cross‐correlation, to avoid cycle‐skipping issues as well as a suitable inversion domain as the pseudo‐depth domain that allows us to preserve the invariant property of the zero‐offset time. This latter feature is useful to avoid updating the reflectivity information at each non‐linear iteration of the full‐waveform inversion, hence considerably reducing the computational cost of the entire workflow. Prior information of the reflectivity in the full‐waveform inversion formalism, a robust misfit function that prevents cycle‐skipping issues and a suitable inversion domain that preserves the seismic invariant are the three key ingredients that should ensure well‐posedness and computational efficiency of full‐waveform inversion algorithms for seismic reflection data.     

Sensitivity analysis and application of time‐lapse full‐waveform inversion: synthetic testing and field data example from the North Sea,Norway

Time‐lapse refraction can provide complementary seismic solutions for monitoring subtle subsurface changes that are challenging for conventional P‐wave reflection methods. The utilization of refraction time lapse has lagged behind in the past partly due to the lack of robust techniques that allow extracting easy‐to‐interpret reservoir information. However, with the recent emergence of the full‐waveform inversion technique as a more standard tool, we find it to be a promising platform for incorporating head waves and diving waves into the time‐lapse framework. Here we investigate the sensitivity of 2D acoustic, time‐domain, full‐waveform inversion for monitoring a shallow, weak velocity change (?30 m/s, or ?1.6%). The sensitivity tests are designed to address questions related to the feasibility and accuracy of full‐waveform inversion results for monitoring the field case of an underground gas blowout that occurred in the North Sea. The blowout caused the gas to migrate both vertically and horizontally into several shallow sand layers. Some of the shallow gas anomalies were not clearly detected by conventional 4D reflection methods (i.e., time shifts and amplitude difference) due to low 4D signal‐to‐noise ratio and weak velocity change. On the other hand, full‐waveform inversion sensitivity analysis showed that it is possible to detect the weak velocity change with the non‐optimal seismic input. Detectability was qualitative with variable degrees of accuracy depending on different inversion parameters. We inverted, the real 2D seismic data from the North Sea with a greater emphasis on refracted and diving waves’ energy (i.e., most of the reflected energy was removed for the shallow zone of interest after removing traces with offset less than 300 m). The full‐waveform inversion results provided more superior detectability compared with the conventional 4D stacked reflection difference method for a weak shallow gas anomaly (320 m deep).     

Anisotropic elastic full‐waveform inversion of walkaway vertical seismic profiling data from the Arabian Gulf

Borehole seismic addresses the need for high‐resolution images and elastic parameters of the subsurface. Full‐waveform inversion of vertical seismic profile data is a promising technology with the potential to recover quantitative information about elastic properties of the medium. Full‐waveform inversion has the capability to process the entire wavefield and to address the wave propagation effects contained in the borehole data—multi‐component measurements; anisotropic effects; compressional and shear waves; and transmitted, converted, and reflected waves and multiples. Full‐waveform inversion, therefore, has the potential to provide a more accurate result compared with conventional processing methods. We present a feasibility study with results of the application of high‐frequency (up to 60 Hz) anisotropic elastic full‐waveform inversion to a walkaway vertical seismic profile data from the Arabian Gulf. Full‐waveform inversion has reproduced the majority of the wave events and recovered a geologically plausible layered model with physically meaningful values of the medium.     

逐步波形反演方法及应用

本文针对天然地震波形反演面临的困难及其复杂性，提出了逐步波形反演方法，第一步，运用波形反演中的试错法，求得地震台站下方成层介质的初步结构；第地一步，以第一步结果为初值，令各层厚度不变，反演速度；第三步，以第二步结果为初值，令速度不变，反演厚度。以上各步还可交替进行，直至得到满意结果。     

天然气水合物似海底反射层的全波形反演

建立了天然气水合物似海底反射层(BSR)研究的全波形反演方法. 这是一种将 水平层状弹性介质的反射共中心点道集转换为截距时间-水平慢度域的反演方法. 反演过程 中采用了全局搜索方法与非线性局部搜索方法. 分两步进行. 第一步是根据走时数据应用非 常快速模拟算法求得速度结构的长波长分量. 第二步，利用波形资料用共轭梯度法求得速度 的短波长扰动分量. 这样，最后反演得到的速度结构模型包含了长波长与短波长分量. 反演 中利用了多网格参数化技术. 日本东南海海槽双BSR的速度结构的反演表明，全波形反演是 天然气水合物BSR研究的重要手段之一.     

测井约束地震波形反演的同伦摄动法

测井数据和地震数据是地震勘探中两种最重要的资料. 测井约束地震波形反演是在非线性波形反演的基础上,利用已知测井资料详细的垂直分辨能力和地震资料均匀密集的水平采样特点, 通过迭代反演来求取一个具有较高分辨率的速度参数.本文建立了测井约束反演模型,研究了测井约束下地震波形反演的同伦摄动求解方法.同伦摄动法作为一种新的、求解数学物理中各种非线性问题的有效方法,具有计算速度快、计算精度高的优点.这对于提高反演的精度和效率是十分有益的. 为了表征该方法的有效性和稳定性,分别对水平层状介质模型和逆冲断层带模型进行了数值模拟,并与Landweber迭代法相对比,结果表明该算法具有更好的收敛性,能够取得更为满意的反演效果.     

多主频波场的时间阻尼全波形反演

低频成分缺失和地下速度强烈变化会导致严重的周期跳现象,是地震数据全波形反演的难题.通过对地震数据加时间阻尼和时间积分降主频处理,提出了一种可有效去除周期跳现象的多主频波场时间阻尼全波形反演方法.由浅到深的速度不准确会造成波形走时失配和走时失配的累积.浅部速度的准确反演可有效地减小深部波形走时失配与周期跳现象.对地震数据施加时间阻尼得到时间阻尼数据,利用不同阻尼值的时间阻尼地震数据实现由浅到深的全波形反演.低主频波场的周期跳现象相对高主频波场的要弱.对地震波场进行不同阶的时间积分以得到不同主频的波场,把低主频波场的全波形反演结果作为高主频波场全波形反演的初始模型.应用缺失4 Hz以下频谱成分的二维盐丘模型合成数据验证所提出的全波形反演方法的正确性和有效性,数值试验结果显示多主频波场的时间阻尼全波形反演方法对缺失低频成分地震数据和地下速度强烈变化具有很好的适应性.     

Inversion of receiver function by wavelet transformation

Introduction Receiver function has been extensively applied in studying S wave velocity of crust and up-per mantle for about 20 years (Owens, et al, 1987; LIU, et al, 1996), which is a time series ob-tained by the deconvolution of vertical component from horizontal component for teleseismic P waveform. Receiver function represents the teleseismic P plane wave response of crust and upper mantle beneath seismic station, from which the source and propagation effects are removed. Receiver funct…