鄂尔多斯地块深部岩石圈电性结构研究

近年来新的研究成果反应出鄂尔多斯地块岩石圈并不是一个具有深根的完整的刚性块体,尤其在鄂尔多斯北部以及河套地堑发现有大范围的下地壳-上地幔低速低阻物质,如果这一情况属实,那么人们对鄂尔多斯地块的认识将发生大的变化.为此,我们在华北克拉通西部布设了一条穿过鄂尔多斯地块、河套地堑和阴山造山带的南北向大地电磁剖面,试图通过深部电性结构的探测提供更多信息.该剖面全长约850 km,共布设54个宽频测点和17个长周期测点.二维和三维反演结果均表明:鄂尔多斯地块内部以38°N为界,南部和北部电性结构存在明显差异.鄂尔多斯地块南部地壳至上地幔150 km深度范围内整体表现为高阻,具有刚性克拉通的特征;鄂尔多斯地块北部到河套地堑之间下地壳出现低阻层,特别是鄂尔多斯北端与河套地堑接壤地段,深部存在一个规模较大的下地壳-上地幔低阻异常体,该异常体从河套地堑开始,横向上向南延伸到鄂尔多斯地块内部约200 km,纵向上从下地壳向下延伸到上地幔(约100 km深度).根据该异常体的空间特征,参考该区地震波低速异常体的分布,我们认为鄂尔多斯北部及河套地堑中下地壳到上地幔存在热物质,其原因与深部的构造活动有关(软流圈热物质上涌、侧向流动等),这一情况可能反映出鄂尔多斯地块北部岩石圈深部正处于被改造(或者破坏)阶段,这对进一步认识青藏高原东北缘与华北克拉通之间的深部关系具有一定的启示作用.     

Crustal structure variation along 30°N in the eastern Tibetan Plateau and its tectonic implications

We determined crustal structure along the latitude 30°N through the eastern Tibetan Plateau using a teleseismic receiver function analysis. The data came mostly from seismic stations deployed in eastern Tibet and western Sichuan region from 2004 to 2006. Crustal thickness and Vp/Vs ratio at each station were estimated by the H–k stacking method. On the profile, the mean crustal thickness and Vp/Vs ratio were found to be 62.3 km and 1.74 in the Lhasa block, 71.2 km and 1.79 near the Bangong–Nujiang suture, 66.3 km and 1.80 in the Qiangtang block, 59.8 km and 1.81 in the Songpan–Garze block, and 42.9 km and 1.76 in the Yangtze block, respectively. The estimated crustal thicknesses are consistent with predictions based on the topography and the Airy isostasy, except near the Bangong–Nujiang suture and in the Qiangtang block where the crust is 5–10 km thicker than predicted, indicating that the crust may be denser, possibly due to mafic underplating. We also inverted receiver functions for crustal velocity structure along the profile, which reveals a low S-wave velocity zone in the lower crust beneath the eastern Tibetan Plateau, although the extent of the low-velocity zone varies considerably. The low-velocity zone, together with previous results, suggests limited partial melting and localized crustal flow in the lower crust of the eastern Tibetan Plateau.     

沿107.6°E南北向剖面鄂尔多斯地块及周缘地区地壳结构

鄂尔多斯地块紧邻青藏高原东北缘,位于华北克拉通的西部,在我国中生代、新生代以来东部地区的构造活动中起到了重要作用.对鄂尔多斯及其周缘地区的研究可以提供有关华北克拉通的形成、演化和破坏过程的重要信息.本文选取了纵贯鄂尔多斯的107.6°E附近南北剖面上的44个流动地震台站进行分析,采用接收函数方法,进行Kirchhoff偏移成像,并且结合在该区域内前人的地震面波频散进行联合反演,获得剖面下方的地壳内部精细结构.研究结果显示:(1)莫霍面在鄂尔多斯北部较平缓,约45km深;在鄂尔多斯南部有所加深,达到50km;其北边的河套盆地的地壳厚度约为50km;南边的渭河盆地到秦岭地区及四川盆地的地壳厚度从约为40km增厚到47～50km.(2)河套盆地下方存在大规模的低速异常,最深可达25km,反映了其显著的拉张构造和沉积历史.(3)秦岭造山带下方的低速异常对应于其主要为长英质的地壳组分,可能是由于中生代的拆沉作用导致的地壳下部基性岩石层的缺失.(4)以38°N为界的鄂尔多斯地块,南北部地壳速度结构存在差异,可能表明了这两部分经历的构造历史不同.     

Crustal seismic structure and depth distribution of earthquakes in the Archean Kuusamo region,Fennoscandian Shield

Two-dimensional crustal velocity models are derived from passive seismic observations for the Archean Karelian bedrock of north-eastern Finland. In addition, an updated Moho depth map is constructed by integrating the results of this study with previous data sets. The structural models image a typical three-layer Archean crust, with thickness varying between 40 and 52 km. P wave velocities within the 12–20 km thick upper crust range from 6.1 to 6.4 km/s. The relatively high velocities are related to layered mafic intrusive and volcanic rocks. The middle crust is a fairly homogeneous layer associated with velocities of 6.5–6.8 km/s. The boundary between middle and lower crust is located at depths between 28 and 38 km. The thickness of the lower crust increases from 5–15 km in the Archean part to 15–22 km in the Archean–Proterozoic transition zone. In the lower crust and uppermost mantle, P wave velocities vary between 6.9–7.3 km/s and 7.9–8.2 km/s. The average V_p/V_s ratio increases from 1.71 in the upper crust to 1.76 in the lower crust.The crust attains its maximum thickness in the south-east, where the Archean crust is both over- and underthrust by the Proterozoic crust. A crustal depression bulging out from that zone to the N–NE towards Kuusamo is linked to a collision between major Archean blocks. Further north, crustal thickening under the Salla and Kittilä greenstone belts is tentatively associated with a NW–SE-oriented collision zone or major shear zone. Elevated Moho beneath the Pudasjärvi block is primarily explained with rift-related extension and crustal thinning at ∼2.4–2.1 Ga.The new crustal velocity models and synthetic waveform modelling are used to outline the thickness of the seismogenic layer beneath the temporary Kuusamo seismic network. Lack of seismic activity within the mafic high-velocity body in the uppermost 8 km of crust and relative abundance of mid-crustal, i.e., 14–30 km deep earthquakes are characteristic features of the Kuusamo seismicity. The upper limit of seismicity is attributed to the excess of strong mafic material in the uppermost crust. Comparison with the rheological profiles of the lithosphere, calculated at nearby locations, indicates that the base of the seismogenic layer correlates best with the onset of brittle to ductile transition at about 30 km depth.We found no evidence on microearthquake activity in the lower crust beneath the Archean Karelian craton. However, a data set of relatively well-constrained events extracted from the regional earthquake catalogue implies a deeper cut-off depth for earthquakes in the Norrbotten tectonic province of northern Sweden.     

On the Vp/Vs–Mg# correlation in mantle peridotites: Implications for the identification of thermal and compositional anomalies in the upper mantle

We use thermodynamically self-consistent and hybrid methods to analyze the correlation of important physical parameters (e.g. bulk density, elastic moduli) with bulk Mg# and modal composition in mantle peridotites at upper mantle conditions. Temperature (anharmonic and anelastic), pressure and compositional derivatives for all these parameters are evaluated. The results show that the widely used correlations between Vp/Vs and Mg# in peridotites are strictly valid only for garnet-bearing assemblages at temperatures < 900 °C. The correlation breaks down when: i) spinel is the stable Al-rich phase in the assemblage and ii) when anelastic attenuation of seismic velocities becomes important (T ? 900 °C). This implies that the range of applicability of published Vp/Vs–Mg# correlations for the upper mantle is limited to a depth interval between the spinel–garnet phase transition and the 900 °C isotherm. We use numerical simulations to show that this depth interval is virtually nonexistent in lithospheres thinner than ～ 140 km and can comprise up to ～ 50% of the lithospheric mantle in thick (> 220 km) lithospheric domains. In addition, we show that for most of the upper mantle the expected Δ(Vp/Vs) values associated with compositional variations are smaller than the resolution limit of current seismological methods. All these considerations suggest that the Vp/Vs ratio is not a reliable measure of compositional variations and that for large parts of the upper mantle compositional anomalies cannot be separated from thermal anomalies on the basis of seismological studies only. We further confirm that the only reliable indicator of compositional anomalies in a peridotitic mantle is the ratio of density to shear wave velocities (ρ/Vs). Our results demonstrate that geophysical–petrological models (forward or inverse) that model these two fields (i.e. density and Vs) self-consistently within a robust thermodynamic framework are necessary for characterizing the small-scale thermal and compositional structure of the lithosphere and sublithospheric upper mantle.     

Mantle dynamics of the Paleoproterozoic North China Craton: A perspective based on seismic tomography

We investigate the mantle dynamics beneath the North China Craton (NCC) and surrounding regions based on a synthesis of recent P-wave mantle tomographic data down to depths of 600–800 km and their correlation with the surface geological features, with particular reference to the Paleoproterozoic tectonic events associated with the incorporation of the NCC within the Columbia supercontinent amalgam. From the tomographic images, we identify a hot corridor in the mantle transition zone beneath the central region of the Western Block of the NCC sandwiched between two cold corridors. This scenario is similar to the donut-shaped high-velocity anomaly surrounding a region of low-velocity anomaly in the lowermost mantle under the Pacific and suggests that the cold regions might represent slab graveyards which provide the fuel for the plumes rising from the center. A tomographic transect along the collisional suture of the NCC with the Columbia supercontinent, covering the Yinshan-Ordos Blocks in the Western Block through the Central Orogenic Belt and into the Eastern Block of the NCC reveals a ca. 250 km thick lithospheric keel below the Ordos Block defined by a prominent high-velocity anomaly. We identify slab break-off and asthenospheric upwelling in this region and suggest that this process probably initiated the thermal and material erosion of the tectosphere beneath the Eastern Block from the Paleoproterozoic, which was further intensified during the Mesozoic when a substantial part of the sub-continental mantle lithosphere was lost. We visualize heat input from asthenosphere and interaction between asthenosphere and overlying carbonated tectosphere releasing CO₂-rich fluids for the preservation of ultra-high temperature (ca. 1000 °C) metamorphic rocks enriched in CO₂ as well as high-pressure mafic granulites as a paired suite in this region. We also identify a hot swell of the asthenosphere rooted to more than 200 km depth and reaching up to the shallow mantle in the tomographic section along 35°N latitude at a depth of 800 km. This zone represents a cross-section through the southern part of the NCC. The surface distribution of Paleoproterozoic Xiong’er lavas and mafic dykes in this region would indicate that this region might have evidenced similar upwellings in the past. Our study has important implications in understanding the evolution of the NCC and suggests that the extensive modification of the mantle architecture and lithospheric structure beneath one of the fundamental Precambrian nuclei of Asia had a prolonged history probably dating from the Paleoproterozoic suturing of the NCC within the Columbia supercontinent amalgam.     

Crustal structure of the Reykjanes Ridge near 62°N,on the basis of seismic refraction and gravity data

Explosion deep seismic sounding data sections of high quality had been obtained with RV Meteor in the Reykjanes Iceland Seismic Project (RRISP77 [Angenheister, G., Gebrande, H., Miller, H., Goldflam, P., Weigel, W., Jacoby, W.R., Pálmason, G., Björnsson, S., Einarsson, P., Pavlenkova, N.I., Zverev, S., Litvinenko, I.V., Loncarecic, B., Solomon, S., 1980. Reykjanes Ridge Iceland Seismic Experiment (RRISP 77). J. Geophys. 47, 228–238]) which close an information gap near 62°N. Preliminary results were presented by Weigel [Weigel, W., 1980. Aufbau des Reykjanes Rückens nach refraktionsseismischen Messungen. In: Weigel, W. (Ed.), Reykjanes Rücken, Island, Norwegischer Kontinentalrand. Abschlusskolloquium, Hamburg zur Meteor-Expedition, vol. 45. DFG, Bonn, pp. 53–61], and here we report on the data and results of interpretation. Clear refracted phases to 90 km distance permit crustal and uppermost mantle structure to be modelled by ray tracing. The apparent P-wave velocities are around 4.5, 6–6.5, 7–7.6 and 8.2–8.7 km/s, but no wide-angle reflections have been clearly seen. Accompanying sparker reflection data reveal thin sediment ponds in the axial zone and up to 400 m thick sediments at 10 Ma crustal age. Ray tracing reveals the following model below the sediments: (1) a distinct, 1–2 km thick upper crust (layer 2A) with Vp increasing with age (to 10 Ma) from <3.4 to 4.9 km/s and with a vertical gradient of 0.1–0.2 km/s/km, (2) a lower crust or layer 3 beginning at depths of 2 (axis) to 4 km (10 Ma age) below sea level with 6.1–6.8 km/s and similar vertical gradients as above, (3) the lower crust bottoms at 5.2–9.5 km depth below sea level (0–10 Ma) with a marked discontinuity, underneath which (4) Vp rises from about 7.5–7.8 km/s (0–10 Ma) with a positive vertical gradient of, again, 0.1–0.2 km/s/km such that 8 km/s would be reached at 12 km and deeper near the axis. Our preferred interpretation is that the mantle begins at the distinct discontinuity (“Moho”), but a deeper “Moho” of Vp ≈ 8 km/s cannot be excluded. From Iceland southward to 60°N several experiments show a decrease of crustal thickness from 14 to 8 km. Velocity trends with age across the ridge reflect cooling and filling of cracks, and thickness trends probably suggest volcanic productivity variations as previously suggested.Gravity inversion concentrates on a profile across the ridge with the above seismic a priori information; with 0.2–0.5 km depth uncertainty it leads to a good fit (±2.5 mGal where seismic data exist). Best fitting densities are (in kg/m³) for sediments, 2180; upper crust, 2450–2570; lower crust, 2850–2940; mantle lithosphere, 3215–3240 with a deficit for an asthenospheric wedge of no more than −100 kg/m³. The morphological ridges and troughs superimposed on the SE ridge flank are partly correlated, partly anti-correlated with the Bouguer anomaly and suggest that variable crustal density variations accompany the morphology variations.     

面波频散与接收函数联合反演南北地震带北段壳幔速度结构

通过对南北地震带北段区域所布设的676个流动地震台站观测资料进行处理,联合反演面波频散与接收函数数据,获得了研究区内地壳厚度、沉积层厚度的分布情况以及地壳上地幔高分辨率S波速度结构成像结果.反演结果显示研究区地壳厚度从青藏高原东北缘向外总体逐渐变薄,秦岭造山带地壳厚度较同属青藏高原东北缘的北祁连块体明显减薄;鄂尔多斯盆地及河套盆地分布有非常厚的沉积层,阿拉善块体部分区域也有一定沉积层分布,沉积层与研究区内盆地位置较为一致;松潘—甘孜块体、北祁连造山带等青藏高原东北缘总体表现为S波低速异常;在中下地壳,松潘—甘孜块体下方的低速体比北祁连造山带下方的低速体S波速度值更小、分布深度更浅,更有可能对应于部分熔融的地壳;鄂尔多斯盆地在中下地壳以及上地幔内有着较大范围的高速异常一直延伸到120 km以下,而河套盆地地幔只在80 km以上部分有着高速异常的分布,此深度可能代表了河套盆地的岩石圈厚度,来自深部地幔的热物质上涌造成了该区域的岩石圈减薄;阿拉善块体在地壳和上地幔都表现出高低速共存的分布特征,暗示阿拉善块体西部岩石圈可能受青藏高原东北缘的挤压作用发生改造.     

Crustal velocity structure in the southern edge of the Central Alborz (Iran)

Inversion of local earthquake travel times and joint inversion of receiver functions and Rayleigh wave group velocity measurements were used to derive a simple model for the velocity crustal structure beneath the southern edge of the Central Alborz (Iran), including the seismically active area around the megacity of Tehran. The P and S travel times from 115 well-located earthquakes recorded by a dense local seismic network, operated from June to November 2006, were inverted to determine a 1D velocity model of the upper crust. The limited range of earthquake depths (between 2 km and 26 km) prevents us determining any velocity interfaces deeper than 25 km. The velocity of the lower crust and the depth of the Moho were found by joint inversion of receiver functions and Rayleigh wave group velocity data. The resulting P-wave velocity model comprises an upper crust with 3 km and 4 km thick sedimentary layers with P wave velocities (V_p) of ～5.4 and ～5.8 km s^?1, respectively, above 9 km and 8 km thick layers of upper crystalline crust (V_p ～6.1 and ～6.25 km s^?1 respectively). The lower crystalline crust is ～34 km thick (V_p ～ 6.40 km s^?1). The total crustal thickness beneath this part of the Central Alborz is 58 ± 2 km.     

Evidence for a thick and localized ultra low shear velocity zone at the base of the mantle beneath the central Pacific

Prominent postcursors to S/Sdiff waves with delays as large as 26 s are observed in Northern America for Papua New Guinea events. These waves sample the northern side of the Pacific large low shear velocity province revealed by global shear velocity (Vs) tomographic models. The emergence of the postcursors strongly depends on the epicenter-to-station azimuth, indicating that the waveforms are, in general, strongly affected by 3-dimensional (3D) heterogeneities. We limit our focus to an azimuthal range around 60°, measured clockwise from north at the epicenter, where the records show a relatively small azimuthal variation, suggesting a relatively small 3D effect there. In this azimuthal range we attempt 2D structural modelling along the great circle plane towards stations in southern US. First, we use a 2D ray theory to search for a range of models, which generate a postcursor to the main Sdiff phase with a delay time consistent with the observations. Then, for some typical models, we calculated waveforms at periods down to 5 s using the spectral element method. We obtained several models that provide synthetic waveforms in a fair agreement with the observations. The result shows that two types of low Vs regions are required to explain the data. One is a broad and weak anomaly region with a Vs reduction of 5% or so, constituting a part of the Pacific large low shear velocity province at the base of the mantle. The other is a laterally localized strong anomaly region with a more than 25% reduction of Vs within a thickness of at least 80 km and a width on the order of 500 km.     

Crustal intrusion beneath the Louisville hotspot track

We report here the first detailed 2D tomographic image of the crust and upper mantle structure of a Cretaceous seamount that formed during the interaction of the Pacific plate and the Louisville hotspot. Results show that at ～ 1.5 km beneath the seamount summit, the core of the volcanic edifice appears to be dominantly intrusive, with velocities faster than 6.5 km/s. The edifice overlies both high lower crustal (> 7.2–7.6 km/s) and upper mantle (> 8.3 km/s) velocities, suggesting that ultramafic rocks have been intruded as sills rather than underplated beneath the crust. The results suggest that the ratio between the volume of intra-crustal magmatic intrusion and extrusive volcanism is as high as ～ 4.5. In addition, the inversion of Moho reflections shows that the Pacific oceanic crust has been flexed downward by up to ～ 2.5 km beneath the seamount. The flexure can be explained by an elastic plate model in which the seamount emplaced upon oceanic lithosphere that was ～ 10 Myr at the time of loading. Intra-crustal magmatic intrusion may be a feature of hotspot volcanism at young, hot, oceanic lithosphere, whereas, magmatic underplating below a pre-existing Moho may be more likely to occur where a hotspot interacts with oceanic lithosphere that is several tens of millions of years old.     

New evidence of delamination in the Western Alboran Sea: Geodynamic evolution of the Alboran domain and its margins

The presence of continuous upper crustal blocks between the Iberian Betics and Moroccan Rif in the western and middle Alboran Sea, detected with tomography, can add new information about the lithosphere structure and geodynamic evolution in this region. A large volume of seismic data (P and S wave arrival times) has been collected for the period between 1 December 1988 and 31 December 2008 by 57 stations located in northern Morocco (National Institute of Geophysics, CNRST, Rabat), southern Portugal (Instituto de Meteorologia, Lisbon) and Spain (Instituto Geografico National, Madrid) and used to investigate the lithosphere in the western Alboran Sea region. We use a linearized inversion procedure comprising two steps: (1) finding the minimal 1-D model and simultaneous relocation of hypocenters and (2) determination of local velocity structure using linearized inversion. The model parameterization in this method assumes a continuous velocity field. The resolution tests indicate that the calculated images give near true structure imaged at 5 km depth for the Tanger peninsula, the Alhoceima region and southern Spain. At 15, 30 and 45 km depth we observe a near true structure imaged in northern Morocco, and southern Spain. At 60 and 100 km, southern Spain and the SW region of the Alboran Sea give a near true structure. The resulting tomographic image shows the presence of two upper crustal bodies (velocity 6.5 km/s) at 5–10 km depth between the Betics, Rif, western and central Alboran Sea. Low velocities at the base of these two bodies favor the presence of melt. This new evidence proves that the Tethysian ocean upper crust was not totally collapsed or broken down during the late Oligocene–early Miocene. These two blocks of upper crust were initially one block. The geodynamic process in the eastern of the Mediterranean is driven by slab rollback. The delamination process of the lithospheric mantle terminates with the proposed slab rollback in the western part of the Mediterranean. This can be explained by the removal of the major part of the lithosphere beneath the area, except in the SW part of the Alboran Sea where a small part of the lithospheric mantle is still attached and is extends and dips to SE beneath the Rif, slowly peeled back to the west. A second detached lithospheric mantle is located and extends to eastern part of the Rif and dips to the SE. The removal of lithosphere mantle from the base of the crust was replaced and heated by extrusion of asthenospheric material coming from depth to replace the part of crust detached. A combination of isostatic surface/topographic uplift and erosion induced a rapid exhumation and cooling of deep crustal rocks.     

Global distribution and climatological features of the 5–6-day planetary waves seen in the SABER/TIMED temperatures (2002–2007)

The paper is focused on the global spatial structure, seasonal and interannual variability of the ～5-day Rossby (W1) and ～6-day Kelvin (E1) waves derived from the SABER/TIMED temperature measurements for 6 full years (January 2002–December 2007). The latitude structure of the ～5-day W1 wave is related to the gravest symmetric wave number 1 Rossby wave. The vertical structure of the ～5-day Rossby wave amplitude consists of double-peaked maxima centred at ～80–90 km and ～105–110 km. This wave has a vertically propagating phase structure from the stratosphere up to 120 km altitude with a mean vertical wavelength of ～50–60 km. The ～6-day E1 wave is an equatorially trapped wave symmetric about the equator and located between 20°N and 20°S. Its seasonal behaviour indicates some equinoctial and June solstice amplifications, while the vertical phase structure indicates that this is a vertically propagating wave between 20–100 km altitudes with a mean vertical wavelength of ～25 km.     

Characterization of the crust of the Coast Mountains Batholith,British Columbia,from P to S converted seismic waves and petrologic modeling

The late Triassic to early Tertiary Coast Mountains Batholith (CMB) of British Columbia provides an ideal locale to study the processes whereby accreted terranes and subduction-related melts interact to form stable continental crust of intermediate to felsic composition and complementary ultramafic residuals. Seismic measurements, combined with calculated elastic properties of various CMB rock compositions, provide a window into the deep-crustal lithologies that are key to understanding the processes of continental growth and evolution. We use a combination of seismic observations and petrologic modeling to construct hypothetical crustal sections at representative locations across the CMB, then test the viability of these sections via forward modeling with synthetic seismic data. The compositions that make up our petrologic forward models are based on calculations using the free energy minimization program Perple_X to predict mineral assemblages at depth for the bulk compositions of exposed plutonic rocks collected in the study area. Seismic data were collected along two transects in west-central British Columbia: a southern line that crossed the CMB near the town of Bella Coola (near 52° N), and a northern line centered on the towns of Terrace and Kitimat (near 54° N). Along both transects, seismic receiver functions reveal high V_p/V_s ratios near the Insular/Intermontane terrane boundary and crustal thickness increasing from 26 ± 3 km to 34 ± 3 km (at the 1 sigma certainty level) from west to east across the Coast Shear Zone (CSZ). On the southern line, we observe an anomalous region of complex receiver functions and diminished Moho signals beneath the central portion of the CMB. Our petrologic and seismic profiles show that observed seismic data from much of the CMB can be well-matched in terms of crustal thickness and structure, average V_p/V_s, and amplitude of the Moho converted phase, without including ultramafic residual material in the lower crust.     

南北地震带北段的远震P波层析成像研究

本文利用"中国地震科学台阵"探测项目在南北地震带北段布设的678个流动地震台站在2013年10月至2015年4月期间记录到的远震波形数据,经过波形互相关拾取到473个远震事件共130309条P波走时残差数据,通过远震层析成像研究获得了该区(30°N-44°N,96°E-110°E)下方0.5°×0.5°的P波速度扰动图像.结果显示,研究区下方P波速度结构显示强烈的不均一性和显著的分区、分块特征.岩石圈速度结构具有显著的东西差异:祁连、西秦岭和松潘甘孜地块组成的青藏东北缘地区显示明显的低速异常,而属于克拉通性质的鄂尔多斯地块和四川盆地则显示高速异常,表明东部克拉通块体对青藏高原物质的东向挤出起到了强烈的阻挡作用.阿拉善地块显示出弱高速和局部弱低速的异常并存的特征.阿拉善地块西部显示低速异常,而东部与鄂尔多斯相邻的地区显示高速异常,可能表明该地区的岩石圈的变形主要受到青藏高原东北缘的挤压作用.在鄂尔多斯和四川盆地之间的秦岭下方100~250 km深度上表现为明显的低速异常,表明该处可能存在软流圈物质的运移通道.鄂尔多斯北部的河套裂陷盆地下方在100~500 km深度内低速异常表现明显,说明该区有深部热物质上涌且至少来源于地幔过渡带.青藏东北缘上地幔显示低速异常且地幔过渡带中出现明显的高速异常,这种结构模式暗示了在青藏高原东北缘可能发生了岩石圈拆沉作用,而高速异常体可能是拆沉的岩石圈地幔.     

Erratum to: Lithospheric structure of NW Iran from P and S receiver functions

We computed P and S receiver functions to investigate the lithospheric structure beneath the northwest Iran and compute the Vp/Vs ratio within the crust of this seismologically active area. Our results enabled us to map the lateral variations of the Moho as well as those of the lithosphere–asthenosphere boundary (LAB) beneath this region. We selected data from teleseismic events (M_b > 5.5, epicentral distance between 30° and 95° for P receiver functions and M_b > 5.7, epicentral distance between 60° and 85° for S receiver functions) recorded from 1995 to 2008 at 8 three-component short-period stations of Tabriz Telemetry Seismic Network. Our results obtained from P receiver functions indicate clear conversions at the Moho boundary. The Moho depth was firstly estimated from the delay time of the Moho converted phase relative to the direct P wave. Then we used the H-Vp/Vs stacking algorithm of Zhu and Kanamori to estimate the crustal thickness and Vp/Vs ratio underneath the stations with clear Moho multiples. We found an average Moho depth of 48 km, which varies between 38.5 and 53 km. The Moho boundary showed a significant deepening towards east and north. This may reveal a crustal thickening towards northeast possibly due to the collision between the Central Iran and South Caspian plates. The obtained average Vp/Vs ratio was estimated to be 1.76, which varies between 1.73 and 1.82. The crustal structure was also determined by modeling of P receiver functions. We obtained a three-layered model for the crust beneath this area. The thickness of the layers is estimated to be 6–11, 18–35, and 38–53 km, respectively. The average of the shear wave velocity was calculated to be 3.4 km/s in the crust and reaches 4.3 km/s below the Moho discontinuity. The crustal thickness values obtained from P receiver functions are in good agreement with those derived by S receiver functions. In addition, clear conversions with negative polarity were observed at ~8.7 s in S receiver functions, which could be related to the conversion at the LAB. This may show a relatively thin continental lithosphere of about 85 km implying that the lithosphere was influenced by various geodynamical reworking processes in the past.     

鄂尔多斯地块北部至阴山造山带深部电性结构特征研究

在SinoProbe-01项目的资助下,完成了一条跨越鄂尔多斯地块北部、河套断陷盆地和阴山造山带的大地电磁剖面,剖面长约440 km,共包括24个宽频测点和4个宽频一长周期联合测点.采用NLCG算法对TE和TM模式数据进行了二维反演,获得了该剖面的二维电性结构模型.结果表明:鄂尔多斯地块北部由浅至深电性结构比较简单,成层性较好,大体可分为低阻沉积盖层-高阻上地壳-低阻下地壳和上地幔顶部三层;河套断陷盆地和阴山造山带电性结构相对复杂,电阻率高低相间.鄂尔多斯地块北缘、河套断陷盆地以及阴山造山带区域的壳幔高导体可能与硫化物和部分熔融作用有关,而鄂尔多斯地块内部大规模的壳幔高导层可能是由高导矿物引起的.河套断陷盆地的沉降、阴山造山带的地势抬升和鄂尔多斯地块北缘东胜一杭锦旗一带的的隆起之间有着紧密的关系,它们的形成可能与区域伸展构造环境条件下的软流圈物质上涌有关.     

Relocation of aftershocks of the 2001 Bhuj earthquake: A new insight into seismotectonics of the Kachchh seismic zone,Gujarat, India

In view of an anomalous crust–mantle structure beneath the 2001 Bhuj earthquake region, double-difference relocations of 1402 aftershocks of the 2001 Bhuj earthquake were determined, using an improved 1D velocity model constructed from 3D velocity tomograms based on data from 10 to 58 three-component seismograph stations. This clearly delineated four major tectonic features: (i) south-dipping north Wagad fault (NWF), (ii and iii) south-dipping south Wagad faults 1 and 2 (SWF₁, SWF₂), and (iv) a northeast dipping transverse fault (ITF), which is a new find. The relocated aftershocks correlate satisfactorily with the geologically mapped and inferred faults in the epicentral region. The relocated focal depths delineate a marked variation to the tune of 12 km in the brittle–ductile transition depths beneath the central aftershock zone that could be attributed to a lateral variation in crustal composition (more or less mafic) or in the level of fracturing across the fault zone. A fault intersection between the NWF and ITF has been clearly mapped in the 10–20 km depth range beneath the central aftershock zone. It is inferred that large intraplate stresses associated with the fault intersection, deepening of the brittle–ductile transition to a depth of 34 km due to the presence of mafic/ultramafic material in the crust–mantle transition zone, and the presence of aqueous fluids (released during the metamorphic process of eclogitisation of lower crustal olivine-rich rocks) and volatile CO₂ at the hypocentral depths, might have resulted in generating the 2001 Bhuj earthquake sequence covering the entire lower crust.     

Imaging Pn velocities beneath the Pannonian basin

The Pannonian depression is an extensional back-arc basin in central Europe and is an integral part of the Alpine–Carpathian orogenic mountain belts. It can be characterized by thinned lower crust, shallow Moho discontinuity, high surface heat flow and Moho temperature, implying recent active tectonic processes. Imaging the velocity structure of the upper mantle may help us to better understand the structure and formation of the Pannonian region.In this paper, P_n traveltimes from regional earthquakes are used to tomographically image the lateral velocity variations in the uppermost mantle beneath the Pannonian basin. The set of linear tomographic equations, built up of the time term equation for each source–receiver pair, is solved by a truncated singular value decomposition algorithm. The explicit computation of the generalized inverse of the tomographic equations makes it possible to deduce both the resolution matrix and the model covariance matrix, allowing us to estimate the resolution and reliability of the solution.The mean compressional wave velocity in the uppermost mantle beneath the Pannonian basin is 7.9 km/s, substantially lower than the average continental P_n velocity of 8.1 km/s. It is mostly due to the high Moho temperature having values on average 400–500 °C more than those in the surrounding areas. The velocity anomalies range from −0.3 to 0.3 km/s relative to the mean velocity of 7.9 km/s. Due to high Moho temperature, below the North Hungarian range low (7.6–7.7 km/s) velocities can be found. High-velocity anomalies of around 8.1 km/s can be detected along the W-SW boundaries of Hungary and at the junction of the Pannonian basin and the Southern Carpathians. The Great Hungarian Plain shows average (7.9 km/s) P_n velocities.     

Lithospheric structure of NW Iran from P and S receiver functions

We computed P and S receiver functions to investigate the lithospheric structure beneath the northwest Iran and compute the Vp/Vs ratio within the crust of this seismologically active area. Our results enabled us to map the lateral variations of the Moho as well as those of the lithosphere–asthenosphere boundary (LAB) beneath this region. We selected data from teleseismic events (M_b?>?5.5, epicentral distance between 30° and 95° for P receiver functions and M_b?>?5.7, epicentral distance between 60° and 85° for S receiver functions) recorded from 1995 to 2008 at 8 three-component short-period stations of Tabriz Telemetry Seismic Network. Our results obtained from P receiver functions indicate clear conversions at the Moho boundary. The Moho depth was firstly estimated from the delay time of the Moho converted phase relative to the direct P wave. Then we used the H-Vp/Vs stacking algorithm of Zhu and Kanamori to estimate the crustal thickness and Vp/Vs ratio underneath the stations with clear Moho multiples. We found an average Moho depth of 48 km, which varies between 38.5 and 53 km. The Moho boundary showed a significant deepening towards east and north. This may reveal a crustal thickening towards northeast possibly due to the collision between the Central Iran and South Caspian plates. The obtained average Vp/Vs ratio was estimated to be 1.76, which varies between 1.73 and 1.82. The crustal structure was also determined by modeling of P receiver functions. We obtained a three-layered model for the crust beneath this area. The thickness of the layers is estimated to be 6–11, 18–35, and 38–53 km, respectively. The average of the shear wave velocity was calculated to be 3.4 km/s in the crust and reaches 4.3 km/s below the Moho discontinuity. The crustal thickness values obtained from P receiver functions are in good agreement with those derived by S receiver functions. In addition, clear conversions with negative polarity were observed at ~8.7 s in S receiver functions, which could be related to the conversion at the LAB. This may show a relatively thin continental lithosphere of about 85 km implying that the lithosphere was influenced by various geodynamical reworking processes in the past.