澜沧—耿马地震发震构造初步研究

本文根据澜沧—耿马地震形变带、极震区及余震序列分布特征,分析了7.6和7.2级地震的发震构造,认为北北西向旱母坝断层是7.2级地震的发震构造,7.6级地震的发震构造不是一条单一的断层,北西向木嘎断裂和北北西向澜沧—勐海断裂均有明显破裂表现,这一特点与震区复杂的地质构造背景有密切联系。     

1988年云南澜沧-耿马地震的烈度分布及地表破裂

1988年11月6日,在云南省西南部的澜沧-耿马断裂带上发生了两次大于7级的地震.地震造成的严重破坏和人员伤亡主要是由于极震区内抗震性能极差的毛石房、砖柱土坯房的大量倒塌所致.澜沧地震的震中基本烈度可达Ⅸ度,耿马地震极震区烈度达Ⅹ度.澜沧地震构造活动的地表证据主要是出现在极震区内的张性地裂缝带和小断层陡坎.地裂缝带和小断坎主要出现在四条相对连续的北北西走向的狭窄地带内,其长度从几百 m 到6km 不等.澜沧地震地表破裂带长约35km,宽约3km,最大垂直位移量和最大右旋水平位移量分别为1.5m 和1.4m.耿马地震地表断裂活动的明显证据包括一系列北北西走向的地裂缝带和一段长约5km的地震断层陡坎.耿马地震地表破裂带长约24km,其最大垂直位移3.5m,最大右旋水平位移为3m.两次地震形成的地表破裂带均具有右旋-正断层性质.本文讨论了这两次地震的 度分布及地表破裂特征.      

龙陵-澜沧断裂带双震型强震活动破裂模型讨论

龙陵地震和澜沧－耿马地震是龙陵－澜沧断裂带上两次典型的双震型强震活动,但它们在地质构造背景、应力场分布、发震构造和烈度分布等方面却具有截然不同的特点。龙陵地震发生在主要由花岗岩构成的地块内,地质构造比较均一;地震处在ＮＮＷ向挤压的统一应力场中;两主震的发震构造走向和两个Ⅸ度区长轴近于直交。澜沧－耿马地震发生在一古板块边界附近,震区构造复杂,耿马７．２级地震和澜沧７．６级地震发生于不同的应力环境中,发震构造和极震区长轴近于平行,呈斜列状分布。通过对龙陵地震和澜沧－耿马地震的对比分析,提出了双震型强震活动的共轭型和牵动型两种破裂模型,并对各自的特点及形成条件进行了初步分析     

Distribution of seismic intensities of the November 6, 1988, Lancang-Gengma earthquakes and their surface ruptures in Yunnan Province, China

On November 6, 1988, two earthquakes with magnitude>7 occurred on the Lancang-Gengma fault zone in south-west China. The extensive destruction and loss of lives resulted mainly from widespread collapse of unreinforced masonry and mud brick structures; the maximum preliminary intensity of the Lancang earthquakes was IX on the Chinese scale, which is similar to the Modified Mercall scale, and the highest preliminary intensity of the Gengma earthquake was probably X. The surface manifestation of tectonic activity of the Lancang earthquake was the occurrence of the earthquake-related extensional ground cracks and small fault scarps in the epicentral region. The cracks with small fault scarps occurred mainly in four relatively continuous north-northwest-trending linear zones that ranged from a few hundred meters to 6 km in length. The area within which the cracks and small scarps occurred is 35 km long by 3 km wide. The maximum net throw and the dextral horizontal offset were 1.5m and 1.4m, respectively. Clear evidence of new surface faulting caused by the Gengma earthquake includes a series of relatively continuous north-northwest-trending linear ground crack zones and a 5 km long section of fault scarps. The total length of the surface rupture zones of the Gengma earthquakes is about 24 km, with 3.5m maximum net throw and 3m maximum right-lateral slip. Both earthquakes were associated with surface faulting showing a combination of normal and right lateral motion. The distribution of seismic intensities and surface rupture characteristics of these two earthquakes are discussed in this paper. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 344–353, 1991. The research project was performed out under the direction of Professors. Xingyuan Ma and Yuntai Chen, and the field investigation was performed with help of Kui Jiang and Junchang Zhang of the Seismological Bureau of Yunnan Province. Here the authors express great appreciation.     

减轻地震对云南经济的冲击

地震是云南主要自然灾害之一，它制约了云南经济和社会发展，给云南国民经济带来严重冲击，本研究了云南地震灾害的基本情况，着重分析了１９５０年以来地震对云南国民经济的影响，自１９７０年以来，云南发生的通海，昭通，龙陵和澜沧－耿马四大地震对国民经济的影响最大，通海地震经济损失占当年全省国民生产总值的７．５％，而澜沧－耿马地震则达到７．６％，作认为，防震减灾工作要做在地震发生之前，如果用国民生产总值的１     

外力扰动加剧与澜沧—耿马大地震的爆发

构造运动强烈、不断发生强震的云南地壳,可能经常有部分区域处于不稳定状态,外力也正是在此基础上才得以对地震活动显示出明显的调制效应。1988年11月6日澜沧—耿马7.6级、7.2级大地震前的大量观测资料表明,云南地区,特别是澜沧—耿马附近地区又再次出现了类似1970年通海7.7级、1974年大关7.1级和1976年龙陵7.4级大地震之前,曾发生过的那种地表涝旱剧变和大气压力巨涨落现象。这种震前的外部异常扰动具有很强的重复性,在对应地震上也显示了很强的应验性,故其很有可能在云南未来7级大地震的监视预报中发挥作用。     

澜沧、耿马地震序列图象与发震构造讨论

本文分析了1988年11月6日云南澜沧、耿马地震序列的震中分布及迁移图象,发现其地震序列中主震及余震明显地沿北北西向分布。7.2级地震所形成的形变带沿北北西向旱母坝断层分布,表明该断层即为此次地震的发震构造。7.6级地震时,沿北西向木嘎断裂和北北西向澜沧—勐海断裂均形成明显的地震形变带,表明其发震构造较复杂。主震后的强余震活动与北东向断裂有密切关系。本文认为澜沧、耿马地震序列具有复杂的发震构造和破裂图象。     

澜沧—耿马地震民用建筑震害

1988年11月6日云南澜沧—耿马相继发生7.6级和7.2级地震。本文介绍这次地震损失较重的澜沧、耿马、沧源和双江四个县的民用建筑震害,初步分析了震害的原因,研究了各类房屋的震害特征,总结了从震害中应吸取的经验教训,为地震灾区重建家园和房屋抗震设计提供依据。     

民国时期滇西南地区三次强震补充调查

本文通过对民国时期发生在滇西南地区的1938年5月14日澜沧MS6.0级、1941年5月16日耿马MS7.0级和1941年12月26日澜沧MS7.0级3次地震历史资料的系统收集和整理,并在前人已有研究的基础上,通过现场采访和补充调查获得的新资料,修改和完善了这3次地震的等震线图和极震区范围,并结合该区地形地貌特征和断裂最新活动性研究结果,综合分析评述了其发震构造特征。结果表明,这3次强震发生在腾冲-澜沧新生地震带附近,分别与黑河断裂、南汀河断裂西支及澜沧断裂勐遮段的新活动密切相关。     

滇西南地区黑河断裂中西段晚第四纪构造活动特征

通过卫星影像解译、野外实地调查与地质填图,对滇西南地区黑河断裂中西段晚第四纪构造活动特征进行了研究.结果表明,黑河断裂为一条规模较大的区域性活动断裂带,西起沧源县南,向东南止于澜沧江断裂,全长约168 km,走向280°～310°.该断裂晚第四纪新活动性具有一定的差异性和分段性.根据其几何结构、最新活动性及1988年澜沧7.6级地震破裂带特征,可将黑河断裂从西向东划分为沧源-木戛、木戛-南代和南代-勐往三条次级断裂段.其中的中、西段长约88 km,全新世活动显著,活动性质以右旋走滑为主.沿断裂形成了丰富的断错地貌现象.西段断裂的最新活动断错了全新世晚期地层;中段是1988年澜沧7.6级地震的发震断裂之一.根据对断错冲沟的测量和年代测试,得到其全新世以来右旋滑动速率为(3.54±0.78)mm/a,与区域上其它断裂的滑动速率大致相当,反映了其区域构造活动的整体性和协调性.     

滇西南地区澜沧断裂全新世滑动速率与走滑起始时间探讨

通过卫星影像解译、野外实地调查和地质填图,获得滇西南地区澜沧断裂的基本特征和活动性参数,澜沧断裂属于龙陵—澜沧新生地震断裂带的东南段,北起耿马县联合村,向南东经澜沧县哈卜吗、战马坡、大塘子至澜沧县城东南,总体走向NNW,长度约85km。该断裂为一条全新世活动的右旋走滑断裂,兼具倾滑分量,沿断裂形成了丰富的断错地貌现象,主要表现为断层陡崖、冲沟右旋、断层陡坎、断层沟槽、断层垭口和断陷凹坑等。通过详细的野外考察,选择典型断错地貌进行差分GPS测量,结合所获相应地貌面的年代数据,得到该断裂全新世以来平均右旋走滑速率为(4.2±2.3)mm/a,其结果与现今GPS观测所得速率相当,反映了该断裂长期以来滑动速率的稳定性。同时根据岩体的最大位错量4.6~4.8km,估算断裂开始右旋走滑的时代为距今约1.1 Ma,即早更新世晚期。     

滇西地区中强地震前单台波速比的变化特征

本文应用地震波的运动学特征，以滇西腾冲台，洱源台为例，研究了滇西地区１９８２－１９９０年近十次中强震在地震前的波速变化，对提取该地区孕震的前兆信息作了初步的探讨。文中给出并讨论了这些中强震前的单台波速比异常的共同特征，以及单台波速比变化的时间进程和波速比异常的平面图象，得出：１．单台波速比的异常幅度一般在０．０４－０．１１之间；２．异常时间与震级大小有关；３．中强地震多发生在波速比异常区的边缘。     

滇西南地区汉母坝-澜沧断裂晚第四纪构造活动的地质地貌证据

通过对汗母坝-澜沧断裂晚第四纪地质、地貌实地调查与测量,并结合前人研究成果,讨论了该断裂晚第四纪最新构造活动特征。综合分析认为,汗母坝-澜沧断裂为一条以右旋走滑为主的全新世活动断裂,长约120 km,整体走向NNW。该断裂活动习性具有明显的分段特征,北段称为汗母坝断裂,是1988年耿马7.2级地震的发震断裂;南段称为澜沧断裂,是1988年澜沧7.6级地震的发震断裂之一。晚第四纪以来其新活动形成了丰富的断错地貌现象,如冲沟和山脊右旋位错、断层沟槽、断层垭口、断层陡坎、断陷凹坑等。根据断裂断错地貌特征的相应资料估计,该断裂晚第四纪右旋走滑速率约为(4.7±0.5) mm/a。     

邢台地震区浅部构造特征及其与深部构造的耦合关系

根据邢台7-2 级和6-8 级地震震中区的浅层和超浅层地震勘探结果,查明了震中区浅部铲形断裂的性质及活动年代,认为新河断裂(F1) 自晚更新世以来已不再活动,它不是发震断裂。另外,结合该区深地震反射剖面和深地震测深剖面结果,讨论了震中区的深浅部构造形态及它们的相互关系,从而确定了发震断裂应为震源之下的高倾角超壳断裂①。邢台地震的发生是由于地幔岩浆的上侵作用产生附加应力场,并与区域构造应力场共同作用使该断裂重新活动,引发了邢台地震,并引起浅部断层及地表物质的运动     

唐山古冶、 滦县地区中小地震活动与构造关系研究

小震活动与断层运动紧密相关, 小震定位技术已逐渐成为地震断层破裂、 发震构造研究中不可或缺的手段。 本文采用双差定位法对唐山地区1978—2011年内发生地震进行重新定位, 以地震学与构造地质学为理论基础, 着眼于唐山地震构造系统与滦县地震构造系统的交汇区, 对连续、 丰富的地震数据进行时间、 空间综合分析, 发现古冶东侧出现一条新生地震带。 开滦煤矿地质资料证实了该新生地震带展布与徐家楼—王喜庄基岩断层完全重合, 推测2010年M_S4.2地震与2012年M_S4.8地震均由徐家楼—王喜庄断层活动引起, 应加强该区地震监测工作。     

从高波速比试论云南丽江7级地震的孕震模式

利用震中周围多台地震波资料计算平均波速比, 并对计算误差作了统计和分析, 提出了在介质存在横向不均匀的情况下数据处理方法。在资料有相当可信度的基础上, 动态追踪了１９９６ 年２ 月３ 日云南丽江７ 级地震前滇西北地区波速比的十余年时空演化图象。显示出： 丽江地震孕震区的高波速比异常图象经历了由小到大、由大到小并再次扩大的过程;而低波速比的异常图象则由大到小、由小到大并再次缩小的过程; 地震发生在低波速比异常区包围的高波速比异常区的交汇部位。其时间进程的演化显示丽江地震的孕震区在１９８８年耿马—澜沧７６ 、７２ 级地震后进入非线性阶段, １９９５ 年孟连西中缅边境７３ 级地震前进入失稳阶段。结合滇西北地区地震垂直分布图象和对照含硬包体试样在破裂孕育过程中波速场的演化图象, 表明丽江地震的孕震区具备了坚固体孕震模式的高波速特征     

奉化-丽水-庆元断裂第四系活动性研究

奉化-丽水-庆元断裂是浙江省内一条重要的北东走向断裂,自北向南穿越了浙江省大部地区,研究其活动性能为划分浙江地区潜在震源区以及重大工程的抗震设防提供科学依据。通过野外地质调查、物探等大量工作,结合对该断裂附近历史地震及现代小地震活动性分析,认为该断裂的宁波段、庆元段为晚更新世早期活动断层,具备5～6级地震的发震构造条件,其它地段地震构造相对稳定,发生5级及以上地震的可能性不大。     

STUDY ON THE SEISMOGENIC FAULT AND DYNAMICS PARAME-TERS OF THE 2014 MS6.6 JINGGU EARTHQUAKE IN YUNNAN

On October 17, 2014, a M_S6.6 earthquake occurred in Jinggu, Yunnan. The epicenter was located in the western branch of Wuliang Mountain, the northwest extension line of Puwen Fault. There are 2 faults in the surrounding area, one is a sinistral strike-slip and the other is the dextral. Two faults have mutual intersection with conjugate joints property to form a checkerboard faulting structure. The structure of the area of the focal region is complex. The present-day tectonic movement is strong, and the aftershock distribution indicates the faulting surface trending NNW. There is no obvious surface rupture related to the known fault in the epicenter, and there is a certain distance from the surface of the Puwen fault zone. Regional seismic activity is strong. In 1941, there were two over magnitude 7.0 earthquakes in the south of the epicenter of Jinggu County and Mengzhe Town. In 1988, two mainshock-aftershock type earthquakes occurred in Canglan-Gengma Counties, the principal stress axes of the whole seismic area is in the direction of NNE. Geological method can be adopted to clarify the distribution of surficial fracture caused by active faults, and high-precision seismic positioning and spatial distribution characteristics of seismic sequences can contribute to understand deep seismogenic faults and geometric features. Thus, we can better analyze the three-dimensional spatial distribution characteristics of seismotectonics and the deep and shallow tectonic relationship. The focal mechanism reveals the property and faulting process to a certain extent, which can help us understand not only the active property of faults, but also the important basis for deep tectonic stress and seismogenic mechanism. In order to study the fault characteristic of the Jinggu earthquake, the stress field characteristics of the source area and the geometric parameters of the fault plane, this paper firstly uses the 15 days aftershock data of the Jingsuo M_S6.6 earthquake, to precisely locate the main shock and aftershock sequences using double-difference location method. The results show that the aftershock sequences have clustering characteristics along the NW direction, with a depth mainly of 5~15km. Based on the precise location, calculations are made to the focal mechanisms of a total of 46 earthquakes including the main shock and aftershocks with M_L ≥ 3.0 of the Jinggu earthquake. The double-couple(DC)component of the focal mechanism of the main shock shows that nodal plane Ⅰ:The strike is 239°, the dip 81°, and the rake -22°; nodal plane Ⅱ, the strike is 333°, the dip 68°, and the rake -170.31°. According to focal mechanism solutions, there are 42 earthquakes with a focal mechanism of strike-slip type, accounting for 91.3%. According to the distribution of the aftershock sequence, it can be inferred that the nodal plane Ⅱ is the seismogenic fault. The obtained focal mechanism is used to invert the stress field in the source region. The distribution of horizontal maximum principal stress orienation is concentrated. The main features of the regional tectonic stress field are under the NNE-SSW compression(P axis)and the NW-SE extension(T axis)and are also affected by NNW direction stress fields in the central region of Yunnan, which indicates that Jinggu earthquake fault, like Gengma earthquake, is a new NW-trending fault which is under domination of large-scale tectonic stress and effected by local tectonic stress environment. In order to define more accurately the occurrence of the fault plane of the Jinggu earthquake, with the precise location results and the stress field in the source region, the global optimal solution of the fault plane parameters and its error are obtained by using both global searching simulated annealing algorithm and local searching Gauss-Newton method. Since the parameters of the fault plane fitting process use the stress parameters obtained by the focal mechanism inversion, the data obtained by the fault plane fitting is more representative of the rupture plane, that is, the strike 332.75°, the dip 89.53°, and the rake -167.12°. The buried depth of the rupture plane is 2.746km, indicating that the source fault has not cut through the surface. Based on the stress field characteristics and the inversion results of the fault plane, it is preliminarily believed that the seismogenic structure of the Jinggu earthquake is a newly generated nearly vertical right-lateral strike-slip fault with normal component. The rupture plane length is about 17.2km, which does not extend to the Puwen fault zone. Jinggu earthquake occurred in Simao-Puer seismic region in the south of Sichuan-Yunnan plate. Its focal mechanism solution is similar to that of the three sub-events of the Gengma earthquake in November 1988. The seismogenic structure of both of them is NW-trending and the principal stress is NE-SW. The rupture plane of the Jinggu main shock(NW direction)is significantly different from the known near NS direction Lancang Fault and the near NE direction Jinggu Fault in the study area. It is preliminarily inferred that the seismogenic structure of this earthquake has a neogenetic feature.     

澜沧—耿马地震带大震47年复发周期及其科学意义

在前人研究的基础上,利用自相关函数方法分别对云南各主要地震带大震复发周期分别进行了系统计算,发现云南各地震区大震复发周期随着各自与板块缝合线的距离增是呈现规律性增加：澜沧－耿马地震带,因东、西两邻区大震复发周期分别为４６－４７年,故确认其大震复发周期为４７年。该４７年大震复发周期的确定,超越了本带历史地震记载缺乏、近３０年来地震活动高度平静、前人经验和前兆台网十分薄弱等难以逾越的障碍,对１９８８－     

南北地震带北部5次（1561~1920年）M≥7级地震触发关系研究

以南北地震带北部的青藏高原东北边缘与华北构造区过渡部位为例,通过建立地震构造模型,计算静态库仑破裂应力改变量（ΔCFS）,研究了该区1561~1920年360年间5次M≥7级地震之间的触发过程.结果表明,在1561年罗山东麓7¹/₄级地震之后,下一次地震无一例外地发生在前面地震产生的应力触发区（ΔCFS>0）.在4条被触发的发震断裂中,有3条发震断裂的平均ΔCFS>0.2×10⁵ Pa,最大可达0.62×10⁵ Pa,超出目前普遍认为触发应力阀值（0.1×10⁵ Pa）.根据断裂库仑破裂应力变化量（ΔCFS）和构造应力累计率（δτ）,计算获得了下一次地震发生的提前量（ΔT）,地震活动提前量最大可以达到160a.在一条重要活动构造带或地区上,一次地震发生对下一次地震的触发缩短了地震重复发生所需要的累积时间,使得地震可以提前发生,这一方面使得某一特定的发震断裂在时间尺度表现出准周期性,另一方面使得空间上不同发震断裂的地震活动表现出丛集发生的现象.此项研究有助于认识断裂间相互作用特点、揭示地震丛集发生规律以及预测未来地震危险区.