云南个旧矿区南部矿床原生晕垂直分带研究——以龙树脚矿段为例

矿床原生晕的垂直分带研究是寻找隐伏矿体和盲矿体的有效方法之一。本文通过对 30余种元素的分析 ,研究元素的分带指数、变化系数和变化指数梯度差 ,由此得出矿床原生晕由上至下的垂直分带为 :Mn Cd Zn Sn Cu Au Hg As( 1 82 0中段 ) ;Bi W Co Sb( 1 730中段 ) ;Mo Y( 1 70 0中段 ) ;Ni V Nb Sr La Sc Ti Yb Be Ag( 1 6 4 0中段 ) ;Pb Ga B Ba( 1 5 2 0中段 )。 30种元素的分带序列为 :Mn Ag1 Pb1 Cd Zn Sn Cu Au Hg As Bi W Co Sb Mo Y Ni V Nb Sr Cr La Sc Ti Yb Be Ag2 Pb2 Ga B Ba。     

伊犁煤中潜在有害元素的分布及赋存特征

利用电感耦合等离子体原子发射光谱(ICP-AES)、电感耦合等离子体质谱(ICP-MS)和粉末X射线衍射(XRD)对伊犁盆地48个煤样中常微量元素和矿物含量进行测试,重点探讨As,Cd,Cr,Ni,Pb,Se,Be,Co,Mn,Sb,Th和U等12种潜在有害元素分布及赋存特征。结果表明:1伊犁煤中Mn和Co含量均值接近或超过世界煤和中国煤中Mn和Co含量均值,其他元素均低于世界煤和中国煤含量均值,尤其Se和Cd含量在各样品中均低于检测值;2伊犁煤中Be,Cr,As,Pb,Th和U以铝硅酸盐结合态和碳酸盐岩结合态存在,Mn主要以碳酸盐岩结合态存在,Co和Ni在木斯乡煤中主要以有机结合态存在,在其他伊犁煤中主要以铝硅酸盐结合态存在。     

广西373铀矿床微量元素地球化学特征及其成因探讨

373铀矿床是我国南方典型碳硅泥岩型铀矿床之一,主要发育一套黑色弱硅化泥岩、粉砂岩,硅化生屑灰岩及其过渡型岩类地层,矿床明显受断裂发育影响,铀矿化于次级断裂带中.通过系统地球化学研究表明:3组不同期次脉体普遍亏损过渡元素Ti、Sc、Cr、Cu、Zn和高场强元素Nb、Ta、Zr和Hf;相对较富集Mn、Ni、As、Sr、Mo、Sb、Tl和U等微量元素.后期热液活动使脉体Ba、Sb、As和Mo等元素异常富集.后期热液叠加改造,使得岩石普遍亏损过渡元素Sc、Ti、Cr和高场强元素Nb、Ta、Zr、Hf,普遍富集Co、Ni、Zn、As、Sb、Mo、Cd、W、Tl、Pb、Bi和U,其中As、Sb、Mo、Tl和U尤为富集,富集系数平均达到100左右,U与W、As、Sb和Pb相关系数都在0.9左右,具有高度同源性,铀成矿与热液活动有关.典型剖面微量元素富集与硅化密切相关,当硅化达到一定程度后微量元素富集出现反转,即随着硅化强度增加而富集能力反而降低.V/Cr、V/Sc、Ni/Co、V/(V+Ni)、U/Th、δU、δEu和δCe等特征元素比值反应铀预富集形成于缺氧的古海洋环境.高丰度的As、Sb和Ba等元素,以及U-Th关系图解和Zn-Ni-Co三元图解均显示热水沉积成因.微量元素特征表明碳硅泥岩形成于缺氧的还原环境,铀预富集与热水沉积有关,铀成矿与热液叠加改造有关,后期热液沿运移通道上升进入储集空间,与铀预富集地层热液叠加成矿.     

淮南矿区煤中12种微量元素的赋存状态及环境效应

为研究淮南矿区煤中微量元素的赋存状态和环境效应,在淮南矿区7个矿井共采集17个样品,采用电感耦合等离子质谱仪（ICP-MS）测定了12种微量元素的含量,分别利用聚类分析和因子分析,结合其地球化学性质,讨论了它们的赋存状态,并采用静态燃烧实验研究其挥发性。结果表明:研究的元素没有异常富集;Zn和Cu赋存于闪锌矿中,Cr、Pb和Cd被粘土矿物吸附,Ba可能赋存于铁白云石和方解石中,Ni、Mo、Co和As主要赋存于黄铁矿中,Be和Se以有机结合态存在;研究的元素大多不易挥发,但Zn和Pb易挥发,且含量较高,环境危害较大,Zn和Pb分别赋存于闪锌矿和粘土矿物中,可通过洗选脱除减小其危害。      

373铀矿床微量元素地球化学特征及其成因探讨

内容提要 373铀矿床是我国南方典型碳硅泥岩型铀矿床之一,主要发育一套黑色弱硅化泥岩、粉砂岩,硅化生屑灰岩及其过渡型岩类地层,矿床明显受断裂发育影响,铀矿化于次级断裂带中。通过系统地球化学研究表明：三组不同期次脉体普遍亏损过渡元素Ti、Sc、Cr、Cu、Zn和高场强元素Nb、Ta、Zr和Hf;相对较富集Mn、Ni、As、Sr、Mo、Sb、Tl和U等微量元素。后期热液活动使脉体Ba、Sb、As和Mo等元素异常富集。后期热液叠加改造,使得岩石普遍亏损过渡元素Sc、Ti、Cr和高场强元素Nb、Ta、Zr、Hf,普遍富集Co、Ni、Zn、As、Sb、Mo、Cd、W、Tl、Pb、Bi和U,其中As、Sb、Mo、Tl和 U尤为富集,富集系数平均达到100左右,U与W、As、Sb和Pb相关系数都在0.9左右,具有高度同源性,铀成矿与热液活动有关。典型剖面微量元素富集与硅化密切相关,当硅化达到一定程度后微量元素富集出现反转,即随着硅化强度增加而富集能力反而降低。V/Cr、V/Sc、Ni/Co、V/(V+Ni)、U/Th、δU、δEu和δCe等特征元素比值反应铀预富集形成于缺氧的古海洋环境。高丰度的As、Sb和Ba等元素,以及U-Th关系图解和Zn-Ni-Co三元图解均显示热水沉积成因。微量元素特征表明碳硅泥岩形成于缺氧的还原环境,铀预富集与热水沉积有关,铀成矿与热液叠加改造有关,后期热液沿运移通道上升进入储集空间,与铀预富集地层热液叠加成矿。     

电感耦合等离子体串联质谱法分析凹凸棒黏土中的微量元素

凹凸棒黏土是具有层链状结构的含水富镁铝硅酸盐矿物,矿床成因不同导致凹凸棒黏土中微量元素的组成存在差异,其中Be、Cr、Ni、As、Cd、Sb、Hg、Pb会对健康和环境产生不利影响,而V、Mn、Co、Cu、Zn、Mo、Sn、Ba作为凹凸棒黏土的重要微量元素影响其性能和应用范围,因此,对凹凸棒黏土中微量元素进行精准分析可为...     

黑色页岩与土壤重金属污染

本文利用ICP—MS等技术分析了湘中地区黑色页岩及其相应土壤的重金属含量,在对分析结果进行统计分析的基础上,探讨了黑色页岩与土壤重金属污染的关系。研究表明,黑色页岩是富集多种重金属元素的特殊岩石。以黑色页岩岩系为母岩的土壤,不仅明显富集Cu、Cd、Cr、Co、Pb、Zn、Mo、Ni、V、U、Sn、Sb、T1、Th等多种重金属元素,而且受到Mo、Sb、Cd、U、Tl、Cu、V、Sn、Th等重金属的污染,其中以Mo、Cd、Sb、U、Tl等的污染尤为严重。黑色页岩土壤重金属污染在一些地方已产生明显的负面环境效应,值得关注。     

浙江省下寒武统荷塘组黑色页岩系地球化学特征

首次根据浙江省西北部荷塘组岩石样品的实测数据,提出了浙江省荷塘组黑色岩系6个岩性层的Pt、Pd、Au、Ag、Cu、As、Sb、Pb、Mo、Ni、V、P、U、B、Cd、Tl、Se、Zn元素的平均值,运用微量元素和稀土元素的配分模式探讨了成岩环境及元素高含量对环境的影响.荷塘组富集元素较多,富集程度高的有Mo、Se、Cd、Ag、Sb、U、As、P;较富集的有V、B、Cu、Tl、Zn,弱富集的为Au、Pt、Pb、Ni.综合地质地球化学特征研究认为,荷塘组黑色岩系具有寻找含钼、磷、矾和有色金属矿产的潜力.     

湘中安化黑色页岩土壤玉米的元素地球化学分析

利用等离子质谱(ICP-MS)等分析技术,对产于安化东坪、烟溪黑色页岩土壤上的玉米进行元素地球化学分析.结果.表明:尽管东坪、烟溪黑色页岩土壤重金属元素富集的程度及其元素组合特征明显不同,但生长在其上的玉米有相似的主量元素和重金属元素的富集特征.玉米中Cd、Cr、Sc、Tl、Zn等重金属相对富集,以Cd的富集尤为明显;而Ba、Co、Cu、Fe、Mo、Ni、Pb、Sb、U、V等重金属相对亏损.黑色页岩土壤重金属污染的环境地球化学效应表现为Sc、Cr、Cd、Tl等生物毒性重金属元素在玉米中富集,而Ba、V、Co、Ni、Mo、Rb、Sr等生物必需微量金属在玉米中亏损.     

黔西断陷区煤中潜在毒害微量元素赋存状态分析

通过对贵州西南部黔西断陷区晚二叠世和晚三叠世36个煤层煤样的灰分、硫分、灰成分及21种潜在毒害微量元素进行的分析测试及其相关性分析和聚类分析，得出Cr，U与煤中灰分成明显正相关；Ba，Be，Co，Cr，Cu，Mo，Se，Sn，Th，Tl，U，V等与粘土矿物正相关；碳酸盐矿物中Mn，Cd，Ni含量较高；As，Pb，Sb，zn等主要分布于硫化物矿物中；区内煤中不同来源、不同地质历史时期形成的硫化物中潜在毒害微量元素含量相差甚大；亲有机质的潜在毒害微量元素表现不显著。     

Abundances and modes of occurrence of trace elements in the Çan coals (Miocene), Çanakkale-Turkey

This study presents the concentrations and modes of occurrence of trace elements in 81 coal samples from the Çan basin of northwestern Turkey. The concentration of trace elements in coal were determined by inductively coupled plasma-mass spectrometry and inductively coupled plasma-atomic emission spectrometry. Additionally, traditional coal parameters were studied by proximate, ultimate, X-ray diffraction, and petrographic analyses. Twenty trace elements, including As, B, Ba, Be, Cd, Cu, Co, F, Hg, Mo, Ni, Pb, Sb, Se Sn, Th, Tl, U, V, and Zn, receive much attention due to their related environmental and human health concerns. The Çan coals investigated in this study are lignite to sub-bituminous coal, with a broad range of ash yields and sulphur contents. The trace element concentrations show variety within the coal seams in the basin, and the affinities vary among locations. The concentrations of B, Ba, Be, Cd, Cu, Co, F, Hg, Mo, Ni, Pb, Sb, Se, Sn, Tl, and Zn in Çan coals are within the Swaine's worldwide concentration range, with the exception of As, Th, U, and V. On the other hand, compared with world coals, the Çan basin coals have higher contents of As, B, Cu, Co, Mo, Pb, Th, U, V, and Zn. Based on statistical analyses, most of the trace elements, except for U, show an affinity to ash yield. Elements including As, Cd, Hg, Se, Cu, Mo, Ni, and Zn, show a possible association with pyrite; however, the elements Se, B, and Mo can be have both organic and inorganic associations.     

Concentration and distribution of trace elements in some coals from Northern China

The concentration, distribution and modes of occurrence of trace elements in thirty coals, four floors and two roofs from Northern China were studied. The samples were collected from the major coalfields of Shanxi Province, Shaanxi Province, Inner Mongolian Autonomous Region, and Ningxia Hui Autonomous Region. The concentrations of seventeen potential hazardous trace elements, including Hg, As, Se, Pb, Cd, Br, Ni, Cr, Co, Mo, Mn, Be, Sb, Th, V, U, Zn, and five major elements P, Na, Fe, Al, and Ca in coals were determined.Compared with average concentration of trace elements in Chinese coal, the coals from Northern China contain a higher concentration of Hg, Se, Cd, Mn, and Zn. They may be harmful to the environment in the process of combustion and utilization. Vertical variations of trace elements in three coal seams indicated the distributions of most elements in coal seam are heterogeneous. Based on statistical analyses, trace elements including Mo, Cr, Se, Th, Pb, Sb, V, Be and major elements including Al, P shows an affinity to ash content. In contrast, Br is generally associated with organic matter. Elements As, Ni, Be, Mo, and Fe appear to be associated with pyrite. The concentrations of trace elements weakly correlate either to coal rank or to maceral compositions.     

Concentration and association of minor and trace elements in Mukah coal from Sarawak, Malaysia, with emphasis on the potentially hazardous trace elements

The ash yield and concentrations of twenty-four minor and trace elements, including twelve potentially hazardous trace elements were determined in Mukah coal from Sarawak, Malaysia. Comparisons made to the Clarke values show that Mukah coal is depleted in Ag, Ba, Be, Cd, Co, Mn, Ni, Se, U, and V. On the other hand, it is enriched in As, Cr, Cu, Pb, Sb, Th, and Zn. Among the trace elements studied, V and Ba are associated predominantly with the clay minerals. Manganese, Cr, Cu, Th, and Ni are mostly bound within the aluminosilicate, sulphide and/or carbonate minerals in varying proportions, though a portion of these elements are also organically bound. Arsenic, Pb and Sb are mostly organically bound, though some of these elements are also associated with the sulphide minerals. Zinc is associated with both the organic and inorganic contents of the coal. Among the potentially hazardous trace elements, Be, Cd, Co, Mn, Ni, Se, and U may be of little or no health and environmental concerns, whereas As, Cr, Pb, Sb and Th require further examination for their potential health and environmental concerns. Of particular concern are the elements As, Pb and Sb, which are mostly organically bound and hence cannot be removed by physical cleaning technologies. They escape during coal combustion, either released as vapours to the atmosphere or are adsorbed onto the fine fly ash particles.     

Trace elements in high-S subbituminous coals from the teruel Mining District, northeast Spain

The elemental composition of high temperature ash (750°C) and forms of S were studied in 25 coal seams from the Escucha Formation (Middle Albian) in the Teruel Mining District, northeast Spain. The principal analytical method was ICP-MS, but ICP-ES was also used in the determination of some trace elements. The analytical data show wide ranges of trace element cotnents among the coal seams studied, even in the vertical profile of a single coal seam. These wide ranges of the trace element concentrations are attributed to both syngenetic and epigenetic processes.When a comparison was made between the average trace element contents of the Teruel Mining District coals, and those of the average content in worldwide coals, the Teruel coals show slightly higher concentrations of Be and U, and lower concentrations of Ba, Cd, Mn, Pb, Sr and Zr. Further, three main groups of trace elements were differentiated on the basis of the inorganic/organic association: (1) trace elements with inorganic affinity; Ba, Ce, Co, Cr, La, Mn, Ni, Rb and Zr. Between these, Ba, Ce, Cr and Rb show a well defined correlation with the clay mineral content, and Co and Ni with pyritic-S content; (2) trace elements with an intermediate (mixed) affinity; As, Cd, Cu, Dy, Er, Eu, Gd, Ge, Ho, Lu, Mo, Nd, Pb, Pr, Sb, Sm, Sr, Tb, Th, Tm, U, Yb and Zn. In this group, As, Cd, Cu, Ge, Mo, Th, U and Zn show a weak trend associated with the mineral matter and Sr with the organic matter; and (3) Be shows an organic affinity. The high mineral matter content (21.3% HTA) of the Teruel coals may account for the great number of elements with inorganic affinity. This classification represents a general trend, but the results show that the affinities of some trace elements (e.g. As, Sb and Zn) may vary from one coal seam to another in the Teruel Mining District.     

Geochemistry and Modes of Occurrence of Hazardous Trace Elements in the No. 11 Coal Seam, Antaibao Surface Mine, Shanxi Province

Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co, Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.ll coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis （INAA）, Inductively Coupled Plasma Atomic Emission Spectrometry （ICP-AES）, Cold-Vapor Atomic Absorption Spectrometry （CV-AAS） and Graphite Furnace Atomic Absorption Spectrometry （GF-AAS）. Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic suffur in vertical section indicated that： （a） the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; （b） the concentrations of Cr, Zn and Mo are higher in roof, floor and lower in coal seam; （c） the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; （d） the concentrations of Mo, V, Th and AI vary consistently with the ash yield. Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as AI, Fe, P, Ca shows that： （a） pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; （b） Mo, Se, Pb, Cr, Th, Co, Ca and A! are related to clay mineral, which is the main source of ash; （c） U, Zn, V, Na, P maybe controlled by phosphate or halite; （d） Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.     

Concentration and distribution of elements in Late Permian coals from western Guizhou Province,China

With the aim of better understanding geochemistry of coal, 71 Late Permian whole-seam coal channel samples from western Guizhou Province, Southwest China were studied and 57 elements in them were determined. The contents of Al, Ca, Co, Cr, Cu, Fe, Ga, Hf, K, Li, Mn, Mo, Nb, Ni, Sn, Ta, Ti, Th, U, V, Zr, and REEs in the Late Permian coals from western Guizhou Province are higher than the arithmetic means for the corresponding elements in the US coals, whereas As, Ba, Br, F, Hg, P, Se, and Tl are lower. Compared to common Chinese coals, the contents of Co, Cr, Cu, Ga, Hf, Li, Mn, Mo, Ni, Sc, Sn, Ti, U, V, Zn, and Zr in western Guizhou coals are higher, and As, F, Hg, Rb, Sb, Tl, and W are lower. Five groups of elements may be classified according to their mode of occurrence in coal: The first two, Group A, Tm–Yb–Lu–Y–Er–Ho–Dy–Tb–Ce–La–Nd–Pr–Gd–Sm, and Group B, As–Sr–K–Rb–Ba–F–Ash–Si–Sn–Ga–Hf–Al–Ta–Zr–Be–Th–Na, have high positive correlation coefficients with ash yield and they show mainly inorganic affinity. Some elements from Group B, such as Ba, Be, Ga, Hf, and Th, are also characterized by significant aluminosilicate affinity. In addition, arsenic also exhibits high sulfide affinity (r_S–Fe>0.5). The elements, which have negative or lower positive correlation coefficients with ash yield (with exceptions of Bi, Cs, Nb, Mn, Se, and Ti), are grouped in other four associations: Group C, Cr–V–Mo–U–Cd–Tl; Group D, Hg–Li–Sc–Ti–Eu–Nb–Cs–W; Group E, Bi–Sb; and Group F, Co–Ni–Cu–Pb–Zn–Mg–Se–Ca–Mn–S–Fe. The correlation coefficients of some elements, including Co, Cr, Cu, Fe, Hg, Li, Mo, Ni, P, S, Sc, U, V, and Zn, with ash yield are below the statistically significant value. Only Cr and Cu are negatively correlated to ash yield (−0.07 and −0.01, respectively), showing intermediate (organic and inorganic) affinity. Manganese and Fe are characterized by carbonate affinity probably due to high content of epigenetic veined ankerite in some coals. Phosphorus has low correlation coefficients with any other elements and is not included in these six associations. There are five possible genetic types of enrichment of elements in coal from western Guizhou Province: source rock, volcanic ash, low-temperature hydrothermal fluid, groundwater, and magmatic hydrothermal inputs.     

Release of heavy metals during weathering of the Lower Cambrian Black Shales in western Hunan,China

Weathering of heavy metal enriched black shales may be one of the most important sources of environmental contamination in areas where black shales are distributed. Heavy metal release during weathering of the Lower Cambrian Black Shales (LCBS) in western Hunan, China, was investigated using traditional geochemical methods and the ICP-MS analytical technique. Concentrations of 16 heavy metals, 8 trace elements and P were measured for samples from selected weathering profiles at the Taiping vanadium ore mine (TP), the Matian phosphorous ore mine (MT), and Taojiang stone-coal mine (TJ). The results show that the bedrock at these three profiles is enriched with Sc, V, Cr, Co, Ni, Cu, Zn, Pb, Th, U, Mo, Cd, Sb, Tl, and P. Based on mass-balance calculation, the percentages of heavy metals released (in % loss) relative to immobile element Nb were estimated. The results show significant rates of release during weathering of: V, Cr, Co, Ni, Cu, Zn, U, Mo, Cd, Sn, Sb, and Tl for the TP profile; Sc, Cr, Mn, Co, Ni, Cu, Zn, Pb, Th, Cd, and Sn for the MT profile; and Sc, Mn, Co, Ni, Zn, Th, Cd, Sn, and Tl for the TJ profile. Among these heavy metals, Co, Ni, Zn, Cd, and Sn show very similar features of release from each of the three weathering profiles. The heavy metals released during weathering may affect the environment (especially topsoil and surface waters) and are possibly related to an observed high incidence of endemic diseases in the area.     

Geochemistry of trace metals and Pb isotopes of sediments from the lowermost Xiangjiang River, Hunan Province (P. R. China): implications on sources of trace metals

This paper reports a geochemical study of trace metals and Pb isotopes of sediments from the lowermost Xiangjiang River, Hunan province (P. R. China). Trace metals Ba, Bi, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, Mo, Cd, Sn, Sb, Pb, Tl, Th, U, Zr, Hf, Nb and Ta were analyzed using ICP-MS, and Pb isotopes of the bulk sediments were measured by MC-ICP-MS. The results show that trace metals Cd, Bi, Sn, Sc, Cr, Mn, Co, Ni, Cu, Zn, Sb, Pb and Tl are enriched in the sediments. Among these metals, Cd, Bi and Sn are extremely highly enriched (EF values >40), metals Zn, Sn, Sb and Pb significantly highly (5 < EF < 20), and metals Sc, Cr, Mn, Co, Ni, Cu and Tl moderately highly (2 < EF < 5) enriched in the river sediments. All these metals, however, are moderately enriched in the lake sediments. Geochemical results of trace metals Th, Sc, Co, Cr, Zr, Hf and La, and Pb isotopes suggest that metals in the river sediments are of multi-sources, including both natural and anthropogenic sources. Metals of the natural sources might be contributed mostly from weathering of the Indosinian granites (GR) and Palaeozoic sandstones (PL), and metals of anthropogenic sources were contributed from Pb–Zn ore deposits distributed in upper river areas. Metals in the lake sediments consist of the anthropogenic proportions, which were contributed from automobile exhausts and coal dusts. Thus, heavy-metal contamination for the river sediments is attributed to the exploitation and utilization (e.g., mining, smelting, and refining) of Pb–Zn ore mineral resources in the upper river areas, and this for the lake sediments was caused by automobile exhausts and coal combustion. Metals Bi, Cd, Pb, Sn and Sb have anthropogenic proportion of higher than 90%, with natural contribution less than 10%. Metals Mn and Zn consist of anthropogenic proportion of 60–85%, with natural proportion higher than 15%. Metals Sc, Cr, Co, Cu, Tl, Th, U and Ta have anthropogenic proportion of 30–70%, with natural contribution higher than 30%. Metals Ba, V and Mo might be contributed mostly from natural process.     

河北开滦矿区煤洗选过程中 15种主要有害微量元素的迁移和分配特征

以河北开滦矿区晚古生代煤及其洗选产品为例,运用电感耦合等离子体质谱 (ICP-MS)和冷原子吸收光谱 (CV-AAS)方法对煤中主要微量有害元素 (包括 Be、 Cr、 Co、 Ni、 Cu、 Zn、 Ga、 As、 Se、 Mo、 Tl、 Pb、 Th、 U和 Hg)的含量及其在洗选过程中的迁移和分配特征进行了研究.通过对开滦矿区 10个矿井 47个煤层刻槽样品主要有害微量元素含量的统计,发现开滦矿区晚古生代煤中 Cr、 Ni、 Cu、 Zn、 Pb和 As富集.通过对原煤精煤中煤尾煤煤泥两套系列样品的分析,发现主要有害微量元素在精煤中都有不同程度的脱除,中煤中相对富集的元素有 Se和 Th,明显被脱除的元素有 Co和 Tl.除 Tl以外,尾煤中主要微量有害元素均有不同程度的富集,以 As的富集率最高,可达 34.4%, Hg的富集率最低,为 1.1%.煤泥中所有微量有害元素均相对富集,以 Hg的相对富集率最高,达 78.4%.因此,如果对尾煤和煤泥加以利用,需要特别关注 As和 Hg等微量有害元素对环境的影响.主要微量有害元素在洗选过程中的分配行为主要受控于它在煤中的赋存状态.