贴体网格各向异性对坐标变换法求解起伏地表下地震初至波走时的影响

笛卡尔坐标系中的经典程函方程在静校正、叠前偏移、走时反演、地震定位、层析成像等很多地球物理工作中都有应用,然而用其计算起伏地表的地震波走时却比较困难.本文通过把曲线坐标系中的矩形网格映射到笛卡尔坐标系的贴体网格,推导出曲线坐标中的程函方程,而后,用Lax-Friedrichs快速扫描算法求解曲线坐标系的程函方程.研究表明本文方法能有效处理地表起伏的情况,得到准确稳定的计算结果.由于地表起伏,导致与之拟合的贴体网格在空间上的展布呈各向异性,且这种各向异性的强弱对坐标变换法求解地震初至波的走时具有重要影响.本文研究表明,随着贴体网格的各向异性增强,用坐标变换法求解地表起伏区域的走时计算误差增大,且计算效率降低,这在实际应用具有指导意义.     

曲线坐标系程函方程的求解方法研究

笛卡尔坐标系中经典的程函方程在静校正、叠前偏移、走时反演、地震定位、层析成像等许多地球物理工作都有应用,然而用其计算起伏地表的地震波走时时却比较困难.我们通过把曲线坐标系中的矩形网格映射到笛卡尔坐标系的贴体网格推导出了曲线坐标中的程函方程,此时,曲线坐标系的程函方程呈现为各向异性的程函方程(尽管在笛卡尔坐标系中介质是各向同同性的).然后尝试用求解各向同性程函方程的快速推进法和Lax-Friedrichs快速扫描算法来分别求解该方程.数值试验表明未加考虑各向异性程函方程与各向同性程函方程的差别而把求解各向同性程函方程的快速推进法直接拓展到曲线坐标中的程函方程的做法是错误的,而Lax-Friedrichs快速扫描算法总能稳定地求解曲线坐标系的程函方程,进而有效地处理了地表起伏的情况,得到稳定准确的计算结果.     

An upwind fast sweeping scheme for calculating seismic wave first‐arrival travel times for models with an irregular free surface

The topography‐dependent eikonal equation formulated in a curvilinear coordinate system has recently been established and revealed as being effective in calculating first‐arrival travel times of seismic waves in an Earth model with an irregular free surface. The Lax–Friedrichs sweeping scheme, widely used in previous studies as for approximating the topography‐dependent eikonal equation viscosity solutions, is more dissipative and needs a much higher number of iterations to converge. Furthermore, the required number of iterations grows with the grid refinement and results in heavy computation in dense grids, which hampers the application of the Lax–Friedrichs sweeping scheme to seismic wave travel‐time calculation and high‐resolution imaging. In this paper, we introduce a new upwind fast sweeping solver by discretising the Legendre transform of the numerical Hamiltonian of the topography‐dependent eikonal equation using an explicit formula. The minimisation related to the Legendre transform in the sweeping scheme is solved analytically, which proved to be much more efficient than the Lax–Friedrichs algorithm in solving the topography‐dependent eikonal equation. Several numerical experiments demonstrate that the new upwind fast sweeping method converges and achieves much better accuracy after a finite number of iterations, independently of the mesh size, which makes it an efficient and robust tool for calculating travel times in the presence of a non‐flat free surface.     

模型扩展和地形平化起伏地形处理方案在地震走时层析成像中的对比研究

中国大陆中西部普遍具有强烈的地形起伏,起伏地形会对地震资料的处理分析产生严重干扰.精细处理起伏地形成为高精度地震成像的必然要求.传统方法通过填充低速介质将不规则模型扩展为规则模型来处理起伏地形.近年来,借助坐标变换将物理空间不规则模型转换为计算空间规则模型的地形平化方法,为解决起伏地形问题提供了新思路.本文基于经典的模型扩展和新发展的地形平化方法分别处理起伏地形,从走时正演、射线追踪和反演成像三个方面,全面细致地评判了两种地形处理方法在起伏地形层析成像中的适用性和有效性.结果表明,模型扩展中阶梯状近似和填充介质速度参与计算,会造成起伏地形走时计算精度损失,出现虚假射线路径和错误出射角,导致反演分辨率降低,成像结果模糊甚至失真;地形平化中采用贴体网格参数化,能够保证离散模型完全匹配起伏地形,并且保持起伏地形在物理空间和计算空间中均为自由表面.在此基础上发展的层析成像技术具有高度的保真性,有效地处理了地形起伏效应,为起伏地形区域精细速度成像提供了有力的技术保障.     

曲线坐标系因式分解程函方程及其走时计算

地震波走时广泛应用于静校正、层析成像、Kirchhoff偏移成像、地震定位等研究.复杂地表条件是影响走时计算精度的重要因素.近年来,发展的曲线坐标系程函方程为精细刻画起伏地表条件下的地震波走时场特征提供了新的思路.然而,基于有限差分程函方程的求解方法不可避免地受到震源奇异性的影响,即震源附近波前的曲率较大,此时使用平面波近似假设的差分格式会导致较大误差.而震源误差会随着波前的传播到达整个计算区域,从而影响整个区域的求解精度.针对该问题,本文借鉴因式分解的思想,推导建立了曲线坐标系因式分解程函方程,并针对性地发展了其数值求解方法,从根源上解决了复杂模型走时计算中的震源奇异性问题.数值实例表明因式分解法能够有效降低震源误差,显著提高起伏地表走时计算的精度和效率,为起伏地表地震波走时计算提供更佳的选择,在复杂模型的地震资料处理中展现出广泛的应用前景.     

Calculating complex‐valued P‐wave first‐arrival traveltimes in attenuative vertical transversely isotropic media with an irregular surface

The complex‐valued first‐arrival traveltime can be used to describe the properties of both velocity and attenuation as seismic waves propagate in attenuative elastic media. The real part of the complex‐valued traveltime corresponds to phase arrival and the imaginary part is associated with the amplitude decay due to energy absorption. The eikonal equation for attenuative vertical transversely isotropic media discretized with rectangular grids has been proven effective and precise to calculate the complex‐valued traveltime, but less accurate and efficient for irregular models. By using the perturbation method, the complex‐valued eikonal equation can be decomposed into two real‐valued equations, namely the zeroth‐ and first‐order traveltime governing equations. Here, we first present the topography‐dependent zeroth‐ and first‐order governing equations for attenuative VTI media, which are obtained by using the coordinate transformation from the Cartesian coordinates to the curvilinear coordinates. Then, we apply the Lax–Friedrichs sweeping method for solving the topography‐dependent traveltime governing equations in order to approximate the viscosity solutions, namely the real and imaginary parts of the complex‐valued traveltime. Several numerical tests demonstrate that the proposed scheme is efficient and accurate in calculating the complex‐valued P‐wave first‐arrival traveltime in attenuative VTI media with an irregular surface.     

Travel time computations using a compact eikonal equation for vertical transverse isotropic media

Eikonal solvers often have stability problems if the velocity model is mildly heterogeneous. We derive a stable and compact form of the eikonal equation for P‐wave propagation in vertical transverse isotropic media. The obtained formulation is more compact than other formulations and therefore computationally attractive. We implemented ray shooting for this new equation through a Hamiltonian formalism. Ray tracing based on this new equation is tested on both simple as well as more realistic mildly heterogeneous velocity models. We show through examples that the new equation gives travel times that coincide with the travel time picks from wave equation modelling for anisotropic wave propagation.     

3D P‐wave traveltime computation in transversely isotropic media using layer‐by‐layer wavefront marching

Subsurface rocks (e.g. shale) may induce seismic anisotropy, such as transverse isotropy. Traveltime computation is an essential component of depth imaging and tomography in transversely isotropic media. It is natural to compute the traveltime using the wavefront marching method. However, tracking the 3D wavefront is expensive, especially in anisotropic media. Besides, the wavefront marching method usually computes the traveltime using the eikonal equation. However, the anisotropic eikonal equation is highly non‐linear and it is challenging to solve. To address these issues, we present a layer‐by‐layer wavefront marching method to compute the P‐wave traveltime in 3D transversely isotropic media. To simplify the wavefront tracking, it uses the traveltime of the previous depth as the boundary condition to compute that of the next depth based on the wavefront marching. A strategy of traveltime computation is designed to guarantee the causality of wave propagation. To avoid solving the non‐linear eikonal equation, it updates traveltime along the expanding wavefront by Fermat's principle. To compute the traveltime using Fermat's principle, an approximate group velocity with high accuracy in transversely isotropic media is adopted to describe the ray propagation. Numerical examples on 3D vertical transverse isotropy and tilted transverse isotropy models show that the proposed method computes the traveltime with high accuracy. It can find applications in modelling and depth migration.     

轴对称各向异性介质波动方程深度偏移的对称非平稳相移方法

由所建立的三维qP波相速度表示式出发,导出并解析求解各向异性介质中的频散方程,得到三维各向异性介质中的相移算子,进而将以相移算子为基础的对称非平稳相移方法推广到各向异性介质,发展了一个三维各向异性介质的深度偏移方法. 文中使用的各向异性介质的速度模型与现行的各向异性构造的速度估计方法一致,将各向同性、弱各向异性及强各向异性统一在一个模型中. 所建立的各向异性介质对称非平稳相移波场延拓算子可以同时适应速度及各向异性参数横向变化;文中给出的算例虽然是针对二维VTI介质的,但所提出的算法同样适用于三维TI介质.     

VTI介质纯P波混合法正演模拟及稳定性分析

各向异性介质纯P波方程完全不受横波的干扰,在一定程度上可以减缓由于介质各向异性引起的数值不稳定,本文推导了具有垂直对称轴的横向各向同性(VTI)介质纯P波一阶速度-应力方程.由于纯P波方程存在一个分数形式的伪微分算子,无法直接采用有限差分法求解.针对该问题,本文采用伪谱法和高阶有限差分法联合求解波动方程,重点分析了混合法求解纯P波一阶速度-应力方程的稳定性问题,并给出了混合法求解纯P波方程的稳定性条件.数值模拟结果表明纯P波方程伪谱法和高阶有限差分混合法能够进行复杂介质的正演模拟,在强变速度、变密度的地球介质中仍然具有较好的稳定性.     

地震波走时和射线的有限差分计算

以往都是采用射线追踪的方法计算地震波的走时和射线，但是当速度模型复杂时这种方法存在一些问题。本文提出另一种计算地震波走时和射线的方法。该方法从程函方程出发，利用互换原理和Ｆｅｒｍａｔ原理计算出各种波的到时和射线。解决了射线追踪方法存在的问题。为地震波走时和射线的计算以及地震波走时反演开辟了一条新途径。     

起伏地表下基于改进BISQ模型双相介质中曲线网格有限差分法波场模拟

本文以基于改进BISQ模型的二维双相各向同性介质一阶速度-应力方程为基础,推导出了曲线坐标系下对应的方程,然后采用低频散、低耗散的同位网格MacCormack有限差分法来离散方程,并采用紧致的单边MacCormack差分格式结合牵引力镜像法来施加自由地表边界条件,实现了地震波场数值模拟.曲线网格有限差分法采用贴体网格来描述自由表面,地表的网格线紧贴地形,避免了台阶近似造成的数值散射.数值模拟结果表明,在双相介质起伏自由地表和分界面处,各类波型复杂的反射透射规律可以清晰展现,曲线网格有限差分法可以精确地解决地震波在含起伏地表的双相各向同性介质中的传播问题.     

TTI介质弹性波相速度与偏振特征分析

相速度和偏振方向是研究地震波传播规律和描述介质特性的重要参数,在理论研究和实际应用中有重要作用.本文假定倾斜横向各向同性(TTI)介质对称轴位于观测坐标系XOZ面内,在此观测坐标系下直接推导了TTI介质弹性波相速度和偏振方向的解析表达式,再进一步利用Thomsen弱各向异性理论,推导了弱各向异性近似条件下弹性波相速度以及qP波和qSV波偏振方向表达式.理论分析和数值试例表明,在相速度方面,随着各向异性介质参数改变,qP波和qSH波速度变化较为平缓,qSV波速度变化较为剧烈.弹性波相速度近似式误差均较小,能较好地近似精确相速度.在偏振方向方面,SH波偏振方向只是传播方向和对称轴倾角的函数,而与各向异性参数无关,SH波偏振方向既垂直于传播方向,又垂直于TTI介质对称轴方向.除特定方向外,qP波和qSV波的偏振方向与传播方向均成一定角度,并且随TTI介质对称轴倾角的改变而改变;在精确和近似情况下,qP波和qSV波的偏振方向始终垂直;在精度允许范围内,偏振方向的弱各向异性近似式与理论解析式吻合较好.     

Seismic wavefield modeling in media with fluid-filled fractures and surface topography

We present a finite difference (FD) method for the simulation of seismic wave fields in fractured medium with an irregular (non-flat) free surface which is beneficial for interpreting exploration data acquired in mountainous regions. Fractures are introduced through the Coates-Schoenberg approach into the FD scheme which leads to local anisotropic properties of the media where fractures are embedded. To implement surface topography, we take advantage of the boundary-conforming grid and map a rectangular grid onto a curved one. We use a stable and explicit second-order accurate finite difference scheme to discretize the elastic wave equations (in a curvilinear coordinate system) in a 2D heterogeneous transversely isotropic medium with a horizontal axis of symmetry (HTI). Efficiency tests performed by different numerical experiments clearly illustrate the influence of an irregular free surface on seismic wave propagation in fractured media which may be significant to mountain seismic exploration. The tests also illustrate that the scattered waves induced by the tips of the fracture are re-scattered by the features of the free surface topography. The scattered waves provoked by the topography are re-scattered by the fractures, especially Rayleigh wave scattering whose amplitudes are much larger than others and making it very difficult to identify effective information from the fractures.     

三维TTI介质相速度和群速度

相速度和群速度是研究地震波传播规律和描述介质特性的重要参数,是弹性波传播理论中的核心内容,在理论研究和实际应用中有重要作用.本文根据VTI介质的刚度矩阵,利用Bond变换建立了TTI介质刚度矩阵.再利用TTI介质刚度矩阵,结合弹性动力学的本构方程、牛顿运动微分方程和几何方程,得到了三维TTI介质弹性波波动方程和Christoffel方程.通过本征值方法求解Christoffel方程,推导了三维TTI介质弹性波相速度的解析表达式.利用Berryman和Crampin推导各向异性介质群速度公式,根据三维TTI介质的相速度解析式推导了三维TTI介质群速度解析表达式.数值试例表明,随着各向异性介质参数改变,TI介质弹性波相速度变化较为平缓,群速度变化较为剧烈,qP波和SH波速度变化较为平缓,qSV波速度变化较为剧烈.     

VTI介质起伏地表地震波场模拟

起伏地表下地震波场模拟有助于解释主动源和被动源地震探测中穿过山脉和盆地的测线所获得的资料.然而传统的有限差分法处理起伏的自由边界比较困难,为了克服这一困难,我们将笛卡尔坐标系的各向异性介质弹性波方程和自由边界条件变换到曲线坐标系中,采用一种稳定的、显式的二阶精度有限差分方法离散(曲线坐标系)VTI介质中的弹性波方程;对...     

改进的TTI介质纯P波方程正演模拟与逆时偏移

逆时偏移作为一种高精度偏移方法已成为复杂构造成像的重要技术,描述纵波独立传播的延拓方程是各向异性介质逆时偏移的一个关键问题.在对VTI介质几个经典相速度近似公式回顾的基础上,针对常用于描述纯P波的Harlan近似公式在各向异性参数ε较大情况下近似精度较低的问题,本文对Harlan公式中的非椭圆项进行了修正,在非椭圆项前添加了一个与各向异性参数ε有关的修正系数,得到了三种改进型Harlan公式,并以近似精度最高的改进式为基础,推导了TTI介质纯P波方程.针对该伪微分方程,本文利用伪谱法和有限差分法联合实现波场延拓,对于常密度二阶方程,基于中心网格实现;对于一阶应力-速度方程则基于旋转交错网格实现.通过数值试验分析了TTI介质纯P波一阶应力-速度方程的近似精度,并以一阶纯P波方程为基础进行了TTI介质逆时偏移数值模拟试验.结果表明,本文给出的方法能够较准确地描述TTI介质纯P波波场特征,可以应用至各向异性介质逆时偏移.