Reactions and textures in grossular–wollastonite–scapolite calc–silicate granulites from Maligawila, Sri Lanka: evidence for high-temperature isobaric cooling in the meta-sediments of the Highland Complex

Grossular–wollastonite–scapolite calc–silicate granulites from Maligawila in the Buttala klippe, which form part of the overthrusted rocks of the Highland Complex of Sri Lanka, preserve a number of spectacular coronas and replacement textures that could be effectively used to infer their P–T–fluid history. These textures include coronas of garnet, garnet–quartz, and garnet–quartz–calcite at the grain boundaries of wollastonite, scapolite, and calcite as well as calcite–plagioclase and calcite–quartz symplectites or finer grains after scapolite and wollastonite respectively. Other textures include a double rind of coronal scapolite and coronal garnet between matrix garnet and calcite. The reactions that produced these coronas and replacement textures, except those involving clinopyroxene, are modelled in the CaO–Al₂O₃–SiO₂–CO₂ system using the reduced activities. Calculated examples of T–X_CO2 and P–X_CO2 projections indicate that the peak metamorphic temperature of about 900–875 °C at a pressure of 9 kbar and the peak metamorphic fluid composition is constrained to be low in X_CO2 (0.1<X_CO2<0.30). Interpretation of the textural features on the basis of the partial grids revealed that the calc–silicate granulites underwent high-temperature isobaric cooling, from about 900–875 °C to a temperature below 675 °C, following the peak metamorphism. The late-stage cooling was accompanied by an influx of hydrous fluids. The calc–silicate granulites provide evidence for high-temperature isobaric cooling in the meta-sediments of the Highland Complex, earlier considered by some workers to be confined exclusively to the meta-igneous rocks. The coronal scapolite may have formed under open-system metasomatism.     

Contrasting mineral parageneses in high-temperature calc-silicate granulites: examples from the Eastern Ghats, India

Abstract Three types of mineral associations are described from calc-silicate granulites from the Eastern Ghats, India, where geothermobarometry in associated rocks suggests extremely high P–T conditions of metamorphism ( c . 9 ± 1 kbar, 950° C). These mineral associations are: (i) calcite + quartz + scapolite + plagioclase, (ii) calcite + scapolite + wollastonite + porphyroblastic garnet + coronal garnet and (iii) calcite + quartz + wollastonite + scapolite + porphyroblastic garnet + coronal garnet, all coexisting with K-feldspar, titanite and clinopyroxene. The first two associations evolved through nearly isobaric cooling retrograde paths, whereas the third evolved through a nearly isothermal decompression path followed by an isobaric cooling retrograde path. Textural and compositional characteristics suggest the following mineral reactions in the calc-silicate granulites: calcite + quartz = wollastonite + CO₂, calcite + plagioclase = scapolite, calcite + scapolite + wollastonite = porphyroblastic garnet ± quartz + CO₂, CaTs + wollastonite = coronal garnet (association ii) and wollastonite + scapolite = coronal garnet (association iii) + quartz + CO₂. Andradite content in garnet was buffered by the redox equilibria wollastonite + hedenbergite + O₂= andradite + quartz (association iii) and wollastonite + andradite + CaTs + scapolite = hedenbergite + calcite + grossular + O₂ (association ii). The contrasting mineral parageneses have been ascribed to interplay of variables such as X _CO2, f _O2, f _HCl in the fluid, bulk Na content and the nature of the retrograde P–T–X _CO2 paths through which the rocks evolved.     

Reaction textures in calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica: implications for the retrograde P–T path

Calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica, exhibit a sequence of reaction textures that have been used to elucidate their retrograde P–T path. The highest temperature recorded in the calc-silicates is represented by the wollastonite- and scapolite-bearing assemblages which yield at least 760°C at 6 kbar based on experimental results. The calc-silicates have partially re-equilibrated at lower temperatures (down to 450°C) as evidenced by the successive reactions: (1) wollastonite + scapolite + calcite = garnet + CO₂, (2) wollastonite + CO₂= calcite + quartz, (3) wollastonite + plagioclase = garnet + quartz, (4) scapolite = plagioclase + calcite + quartz, (5) garnet + CO₂+ H₂O = epidote + calcite + quartz, and (6) clinopyroxene + CO₂+ H₂O = tremolite + calcite + quartz.
The reaction sequence observed indicates that a CO₂ was relatively low in the wollastonite-bearing rocks during peak metamorphic conditions, and may have been further lowered by local infiltration of H₂O from the surrounding migmatitic gneisses on cooling. Fluid activities in the Bolingen calc-silicates were probably locally variable during the granulite facies metamorphism, and large-scale CO₂ advection did not occur.
A retrograde P–T path, from the sillimanite stability field ( c. 760°C at 6 kbar) into the andalusite stability field ( c. 450°C at <3 kbar), is suggested by the occurrence of secondary andalusite in an adjacent cordierite–sillimanite gneiss in which sillimanite occurs as inclusions in cordierite.     

Metamorphic evolution of calcsilicate granulites near Battye Glacier, northern Prince Charles Mountains, East Antarctica

Calcsilicate granulites of probable Middle Proterozoic age ( c .1000–1100  Ma) in the vicinity of Battye Glacier, northern Prince Charles Mountains, East Antarctica, contain prograde metamorphic assemblages comprising various combinations of wollastonite, scapolite, clinopyroxene, An-rich plagioclase, calcite, quartz, titanite and, rarely, orthoclase, ilmenite, phlogopite and graphite. Comparison of the prograde assemblages with calculated and experimentally determined phase relations in the simple CaO–Al₂O₃–SiO₂–CO₂–H₂O system suggests peak metamorphism at ≥835 °C in the presence (in wollastonite-bearing assemblages at least) of a CO₂-bearing fluid ( X _CO≥0.3) at a probable pressure of 6–7  kbar.
Well-preserved retrograde reaction textures represent: (1) breakdown of scapolite to anorthite+calcite±quartz; (2) formation of grossular–andradite garnet and, locally, (3) epidote, both principally by reactions involving scapolite breakdown products and clinopyroxene; (4) local coupled replacement of clinopyroxene and ilmenite by hornblende and titanite, respectively; and finally (5) local sericitization of prograde and retrograde plagioclase. These retrograde reactions are interpreted to be the result of cooling and variable infiltration by H₂O-rich fluids, possibly derived from crystallizing pegmatitic intrusions and segregations that may be partial melts, which are common throughout the area.     

Petrology of calc-silicate rocks from Koduru,Andhra Pradesh,India

Mineral assemblages, rock and mineral chemistry, and mineral reactions, in calc-silicate rocks from Koduru area, Andhra Pradesh, India are discussed. Mineralogical and bulk chemical differences indicate 3 calc-silicate rock types — type I with K feldspar+calcite+wollastonite+quartz+scapolite+diopside_ss +andradite_ss+sphene, has relatively high rock oxidation ratios. Type II is a highly calcic variety with high rock MgFe ratios, and has K feldspar+calcite+wollastonite+quartz+scapolite + diopside_ss±grossularite_ss+sphene+zoisite. Type III has K feldspar +calcite+wollastonite+quartz+scapolite+diopside_ss +sphene+hornblende+magnetite, and has relatively low oxidation ratio and low MgFe ratio. The 3 calc-silicate rock types have originated as mixtures of limestone/dolomite/marl.Diopside was produced by a reaction involving Ca-amphibole +calcite+quartz, and reversed during retrogression. Andradite_ss in type I rocks was produced at the expense of hedenbergitic component of pyroxene in a continuous reaction as a consequence of increase in the oxygen content of the original sediment relative to type III. Calcite+quartz reacted to give wollastonite. During cooling an influx of water caused scapolite to alter to zoisite.     

Wollastonite--Scapolite Assemblages as Indicators of Granulite Pressure-Temperature-Fluid Histories: The Rauer Group, East Antarctica

Mid-Proterozoic ( 1000 Ma) granulite facies calc-silicates fromthe Rauer Group, East Antarctica, contain grossular-wollastonite-scapolite-dinopyroxene( + quartz or calcite) assemblages which preserve symplectiteand corona textures typically involving the growth of secondarywollastonite. The textures include (1) wollastonite rims betweenquartz and calcite; (2) wollastonite-plagioclase rims and intergrowthsbetween quartz and scapolite; (3) wollastonite-scapolite-clinopyroxeneinter-growths replacing grossular; and (4) wollastonite-plagioclasesymplectites replacing grossular or earlier symplectites (3). Reactions between grossular, scapolite, wollastonite, calcite,quartz, anorthite, and vapour, have been modelled in the CaO-Al₂O₃SiO₂-H₂O-CO₂and more complex systems using the internally consistent data-setof Holland & Powell (1990). Reactions producing scapoliteand wollastonite consume vapour as temperature increases (i.e., carbonation), in agreement with the results of Moecher &Essene (1990). These calc-silicates can therefore behave asfluid sinks under high-grade conditions. Conversely, they maybe important fluid sources on cooling and contribute to theformation of post-metamorphic CO₂rich fluid inclusions in isobaricallycooled granulites. P-T-_CO2 diagrams calculated for typical phase compositions (e.g., garnet, scapolite) demonstrate that the observed texturesare a record of near-isothermal decompression at 800–850 C, consistent with P—rpath determinations based on otherrock types from the Rauer Group. For example, texture (2) resultsfrom crossing the reaction Scapolite + Quartz = Wollastonite + Plagioclase + V on decompression, at 6. 5–7 kb, 820 C, and a_CO2 of0–4–0–5. Furthermore, correlations betweenmodes of product phases (e. g., wollastonitexlinopyroxene) andreactant garnet composition preclude open-system behaviour inthe formation of these textures, consistent with post-peak vapour-absentreactions such as Grossular + Calcite + Quartz = Wollastonite + Scapolite occurring on decomposition at high temperatures (>800C). Reaction textures developed in calc-silicates from other granuliteterranes often involve the formation of grossular ( + quartz calcite) as rims on wollastonite-scapolite, or replacementof wollastonite by calcite-quartz. These textures have developedprincipally in response to cooling below 780–810 C andmay be signatures of near-isobaric cooling. Infiltration ofhydrous fluid is not a necessary condition for the productionof garnet coronas in wollastonite-scapolite granulites. ^*Present address: Department of Earth Sciences, University ofMelbourne, Parkville, Victoria 3052, Australia     

Petrology of ultrahigh-pressure eclogites from the ZK703 drillhole in the Donghai, eastern China

The 558-m-deep ZK703 drillhole located near Donghai in the southern part of the Sulu ultrahigh-pressure metamorphic belt, eastern China, penetrates alternating layers of eclogites, gneisses, jadeite quartzites, garnet peridotites, phengite–quartz schists, and kyanite quartzites. The preservation of ultrahigh-pressure metamorphic minerals and their relics, together with the contact relationship and protolith types of the various rocks indicates that these are metamorphic supracrustal rocks and mafic-ultramafic rock assemblages that have experienced in-situ ultrahigh-pressure metamorphism. The eclogites can be divided into five types based on accessory minerals: rutile eclogite, phengite eclogite, kyanite–phengite eclogite, quartz eclogite, and common eclogite with rare minor minerals. Rutile eclogite forms a thick layer in the drillhole that contains sufficient rutile for potential mining. Two retrograde assemblages are observed in the eclogites: the first stage is characterized by the formation of sodic plagioclase+amphibole symplectite or symplectitic coronas after omphacite and garnet, plagioclase+biotite after garnet or phengite, and plagioclase coronas after kyanite; the second stage involved total replacement of omphacite and garnet by amphibole+albite+epidote+quartz. Peak metamorphic P–T conditions of the eclogites were around 32 to 40 kbar and 720°C to 880°C. The retrograde P–T path of the eclogites is characterized by rapidly decreasing pressure with slightly decreasing temperature. Micro-textures and compositional variations in symplectitic minerals suggest that the decompression breakdown of ultrahigh-pressure minerals is a domainal equilibrium reaction or disequilibrium reaction. The composition of the original minerals and the diffusion rate of elements involved in these reactions controlled the symplectitic mineral compositions.     

Humite- and scapolite-bearing assemblages in marbles and calcsilicates of Dronning Maud Land, Antarctica: new data for Gondwana reconstructions

This study investigates marbles and calcsilicates in Central Dronning Maud Land (CDML), East Antarctica. The paleogeographic positioning of CDML as part of Gondwana is still unclear; however, rock types, mineral assemblages, textures and P–T conditions observed in this study are remarkably similar to the Kerala Khondalite Belt in India. The CDML marbles and calcsilicates experienced a Pan-African granulite facies metamorphism at c. 570 Ma and an amphibolite facies retrogression at c. 520 Ma. The highest grade assemblage in marbles is forsterite+spinel+calcite+dolomite, in calcsilicates the assemblages are diopside+spinel, diopside+garnet, scapolite+wollastonite+clinopyroxene±quartz, scapolite±anorthite±calcite+clinopyroxene+wollastonite. These assemblages constrain the peak metamorphic conditions to 830±20 °C, 6.8±0.5 kbar and X _CO2>0.46. During retrogression, highly fluoric humite-group minerals (humite, clinohumite, chondrodite) replaced forsterite, and garnet rims formed at the expense of scapolite during reactions with wollastonite, calcite or clinopyroxene but without involvement of anorthite. Metamorphic conditions were about 650 °C, 4.5±0.7 kbar, 0.2< X _CO2^fluid<0.36, and the co-existence of garnet, clinopyroxene, wollastonite and quartz constrains f_O2 to FMQ-1.5 log units. Mineral textures indicate a very limited influx of H₂O-rich fluid during amphibolite facies retrogression and point to significant variations of fluid composition in mm-sized areas of the rock. Gypsum was observed in two samples; it probably replaced metamorphic anhydrite which appears to have formed under amphibolite facies conditions. The observed extensive anorogenic magmatism (anorthosites, A-type granitoids) and the character of metamorphism between 610 and 510 Ma suggest that the crustal thermal structure was characterized by a long-lived (50–100 Ma) rise of the crustal geotherm probably caused by magmatic underplating.     

Tectonothermal evolution of the gneiss complex at Salur in the Eastern Ghats Grnaulite Belt of India

Textural relations, thermobarometry and petrogenetic grid considerations in the syn-tectonic granitoid massif and the enveloping metasedimentary gneisses at Salur are consistent with a counter-clockwise P–T –t path for the rocks. The low-P/high-T prograde sector is documented by the pre- to syn-D₁ cordierite±orthopyroxene±garnet±spinel–bearing metatexite leucosomes in metapelites. Heating and loading of the rocks (syn- to post-D₁) resulted in the formation of garnet+orthopyroxene± cordierite-bearing diatexites, and decomposition of cordierite in metatexite leucosomes to orthopyroxene+sillimanite+biotite+quartz symplectites. Near-peak temperature, 850 °C at 8.0 kbar, was reached syn- to post-D₂. Post-peak cooling resulted in the stabilization of coronal grossular and anorthite+calcite symplectites at the expense of scapolite+wollastonite+calcite assemblages in calc-silicate gneisses, and the resetting of cation exchange temperatures at 700–750 °C. Near-isothermal decompression at c. 700–750 °C is manifested by the decomposition of garnet porphyroblasts in the granitoid gneisses to plagioclase+orthopyroxene/ilmenite/biotite two-phase coronas and restabilization of cordierite at garnet margins in metapelites. Subsequent low-P, near-isobaric cooling led to the overprinting of granulite facies assemblages by muscovite+calcite assemblages, and further resetting of cation exchange thermometers to lower temperatures c. 600 °C. The tectonothermal evolution of the Salur gneiss complex vis-a-vis the Eastern Ghats Belt is therefore consistent with high degrees of lower crustal melting, followed by prograde heating of the cover rocks due to magma invasion synchronous with crustal compression, and finally thermal relaxation over a protracted period punctuated by tectonic/erosional denudation of the thickened crust.     

Review of the systematics of CO2–H2O fluid inclusions

Aqueous solutions that contain volatile (gas) components are one of the most important types of fluid in the Earth's crust. The record that such fluids have left in the form of fluid inclusions in minerals provides a wealth of insight into the geochemical and petrologic processes in which the fluids participated. This article reviews the systematics of CO₂–H₂O fluid inclusions as a starting point for interpreting the chemically more complex systems. The phase relations of the binary are described with respect to a qualitative P–T–X model, and isoplethic–isochoric paths through this model are used to explain the equilibrium and non-equilibrium behaviour of fluid inclusions during microthermometric heating and cooling. The P–T–X framework is then used to discuss the various modes of fluid inclusion entrapment, and how the resulting assemblage textures can be used to interpret the P–T conditions, phase states, and evolution paths of the parent solutions. Finally, quantitative methods are reviewed by which bulk molar volume and composition of CO₂–H₂O fluid inclusions can be determined from microthermometric observations of phase transitions.     

Fluid-rock history of granulite facies humite-marbles from Ambasamudram, southern India.

An extensive humite‐bearing marble horizon within a supracrustal sequence at Ambasamudram, southern India, was studied using petrological and stable isotopic techniques to define its metamorphic history and fluid characteristics. At peak metamorphic temperatures of 775±73°C, based on calcite‐graphite carbon isotope thermometry, the mineral assemblages suggest layer‐by‐layer control of fluid compositions. Clinohumite + calcite‐bearing assemblages suggest X_CO2 < 0.4 (at 700°C and 5 kbar), calcite + forsterite + K‐feldspar‐bearing assemblages suggest X_CO2>0.9 (at 790°C); and local wollastonite + scapolite + grossular‐bearing zones formed at X_CO2 of c. 0.3. Retrograde reaction textures such as scapolite + quartz symplectites after feldspar and calcite and replacement of dolomite + diopside or tremolite+dolomite after calcite+forsterite or calcite+clinohumite are indicative of retrogression under high X_CO2 conditions. Calcite preserves late Proterozoic carbon and oxygen isotopic signatures and the marble lacks evidence for extensive retrograde fluid infiltration, while during prograde metamorphism the possible infiltration of aqueous fluids did not produce significant isotopic resetting. Isotopic zonation of calcite and graphite grains was likely produced by localized CO₂ fluid infiltration during retrogression. Contrary to the widespread occurrence of humite‐marbles related to retrograde aqueous fluid infiltration, the Ambasamudram humite‐marbles record a prograde‐to‐peak metamorphic humite formation and retrogression under conditions of low X_H2O.     

Garnet coronas in scapolite-wollastonite calc-silicates from East Antarctica: the application and limitations of activity-corrected grids

Calc-silicate boudins within Proterozoic granulite facies gneisses of the northern Prince Charles Mountains, East Antarctica, preserve a number of reaction textures including garnet coronas between calcite and scapolite; garnet-quartz coronas between scapolite and wollastonite and between plagioclase and wollastonite; calcite-quartz intergrowths in wollastonite; and calcite-plagioclase symplectites in scapolite. These textures have been modelled using petrogenetic grids for reactions in the CaO-Al₂,O₃-SiO₂-CO₂ system, but with reduced mineral activities to account for additional components in real mineral compositions. Such fixed-composition reduced-activity grids are strictly valid only at the point in P-T-a_CO2 space where an assemblage last equilibrated, and do not show the true positions of reactions away from this point because mineral compositions change with reaction progress. In this case, however, mineral compositions close to end-member values and low extents of reaction progress mean that compositional change was limited and the grids are good approximations to true pseudosections over the entire P-T-a_co2 range of interest. The grids show that the textures are consistent with near-isobaric cooling from about 850 to 700d? C at 7 kbar, a P-T path compatible with thermobarometric studies of other lithologies from the area. Phase relationships indicate that CO₂ activities were buffered by the local mineral assemblage during peak and retrograde metamorphism, either under fluid-absent conditions or within a non-pervasive fluid phase. Previous studies of garnet coronas in scapolite-wollastonite calc-silicates have used qualitative grids based on limited experimental data to invoke garnet growth during water infiltration at high temperature, but the grids used here show that garnet coronas can form on cooling, without any need for water influx.     

Experimental modelling of corona textures

Formation of corona textures along olivine–plagioclase and orthopyroxene–plagioclase interfaces has been experimentally reproduced at 670 and 700 °C and 5 kbar with either a pure H₂O fluid phase or 0.1 and 37 m NaCl–H₂O solution fluid. In these experiments, we investigate the interaction of primary olivine and/or orthopyroxene and plagioclase in powders and polished crystals, and in small samples of a natural gabbro. The experiments result in the formation of corona textures with several layers of different assemblages (according to the experimental conditions) consisting of garnet (grossular), clinopyroxene, orthopyroxene, amphibole, chlorite and phlogopite. The experiments show major differences in the number of layers, the mineral assemblages and mineral composition, and in the trends of composition of plagioclase in coronas around olivine and orthopyroxene. The fluid phase composition influences the corona assemblages and the composition of the minerals in the experimental coronas; for example, garnet appears in the coronas in the second experiment where the NaCl–H₂O ratio is low. Experimental modelling of corona textures confirms a model of simultaneous growth of layers by the mechanism of diffusion metasomatism with participation of a fluid phase through which mass is transferred. Zoning in the experimental coronas shows opposing diffusion of Al and Ca from plagioclase and Mg and Fe from olivine/orthopyroxene; difference in the mobility of the components is inferred from observations in the coronas. The experimental corona textures are compared with natural coronas from the Belomorian belt (Baltic shield), developed at 670–690 °C and 7–8 kbar, and the Marun‐Keu complex (Polar Urals), developed at 670–700 °C and 14–16 kbar, where the corona textures correspond to a transitional stage of the gabbro‐to‐eclogite transformation.     

Genesis of wollastonite- and grandite-rich skarns in a suite of marble-calc-silicate rocks from Sittampundi, Tamil Nadu: constraints on the P–T–fluid regime in parts of the Pan-African mobile belt of South India

The Pan-African tectonothermal activities in areas near Sittampundi, south India, are characterized by metamorphic changes in an interlayered sequence of migmatitic metapelites, marble and calc-silicate rocks. This rock sequence underwent multiple episodes of folding, and was intruded by granite batholiths during and subsequent to these folding events. The marble and the calc-silicate rocks develop a variety of skarns, which on the basis of mineralogy; can be divided into the following types: Type I: wollastonite?+?clinopyroxene (mg#?=?71–73)?+?grandite (16–21 mol% Adr)?+?quartz?±?calcite, Type II: grandite (25–29 mol% Adr )?+?clinopyroxene (mg#?=?70)?+?calcite?+?quartz, and Type III: grandite (36–38 mol% Adr)?+?clinopyroxene (mg#?=?55–65)?+?epidote?+?scapolite?+?calcite?+?quartz. Type I skarn is 2–10 cm thick, and is dominated by wollastonite (>70 vol%) and commonly occurs as boudinaged layers parallel to the regional foliation Sn₁ related to the Fn₁ folds. Locally, thin discontinuous lenses and stringers of this skarn develop along the axial planes of Fn₂ folds. The Type II skarn, on the other hand, is devoid of wollastonite, rich in grandite garnet (40–70 vol%) and developed preferentially at the interface of clinopyroxene-rich calc-silicates layers and host marble during the later folding event. Reaction textures and the phase compositional data suggest the following reactions in the skarns: 1. calcite?+?SiO₂?→?wollastonite?+?V, 2. calcite?+?clinopyroxene?+?O₂?→?grandite?+?SiO₂?+?V, 3. scapolite?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V and 4. epidote?+?calcite?+?quartz?+?clinopyroxene?+?O₂?→?grandite?+?V Textural relations and composition of phases demonstrate that (a) silica metasomatism of the host marble by infiltration of aqueous fluids (X_CO2?<?0.15) led to production of large volumes of wollastonite in the wollastonite-rich skarn whereas mobility of FeO, SiO₂ and CaO across the interface of marble and calc-silicate and infiltration of aqueous fluids (X_CO2?<?0.35) were instrumental for the formation of grandite skarns. Composition of minerals in type II skarn indicates that Al₂O₃ was introduced in the host marble by the infiltrating fluid. Interpretation of mineral assemblages observed in the interlayered metapelites and the calcareous rocks in pseudosections, isothermal P-X_CO2 and isobaric T-X_CO2 diagrams tightly bracket the “peak” metamorphic conditions at c.9?±?1 kbar and 750°?±?30°C. Subsequent to ‘peak’ metamorphic conditions, the rocks were exhumed on a steeply decompressive P–T path. The estimated ‘peak’ P–T estimates are inconsistent with the “extreme” metamorphic conditions (>11 kbar and >950°C) inferred for the Pan-African tectonothermal events from the neighboring areas. Field and petrological attributes of these skarn rocks are consistent with the infiltration of aqueous fluid predominantly during the Fn₁ folding event at or close to the ‘peak’ metamorphic conditions. Petrological features indicate that the buffering capacity of the rocks was lost during the formation of type I and II skarns. However, the host rock could buffer the composition of the permeated fluids during the formation of type III skarn. Aqueous fluids derived from prograde metamorphism of the metapelites seem to be the likely source for the metasomatic fluids that led to the formation of the skarn rocks.     

Fluid inclusions in granulites, granulitized eclogites and garnet clinopyroxenites from the Dabie–Sulu terranes, eastern China

Minor granulites (believed to be pre-Triassic), surrounded by abundant amphibolite-facies orthogneiss, occur in the same region as the well-documented Triassic high- and ultrahigh-pressure (HP and UHP) eclogites in the Dabie–Sulu terranes, eastern China. Moreover, some eclogites and garnet clinopyroxenites have been metamorphosed at granulite- to amphibolite-facies conditions during exhumation. Granulitized HP eclogites/garnet clinopyroxenites at Huangweihe and Baizhangyan record estimated eclogite-facies metamorphic conditions of 775–805 °C and ≥15 kbar, followed by granulite- to amphibolite-facies overprint of ca. 750–800 °C and 6–11 kbar. The presence of (Na, Ca, Ba, Sr)-feldspars in garnet and omphacite corresponds to amphibolite-facies conditions. Metamorphic mineral assemblages and P–T estimates for felsic granulite at Huangtuling and mafic granulite at Huilanshan indicate peak conditions of 850 °C and 12 kbar for the granulite-facies metamorphism and 700 °C and 6 kbar for amphibolite-facies retrograde metamorphism. Cordierite–orthopyroxene and ferropargasite–plagioclase coronas and symplectites around garnet record a strong, rapid decompression, possibly contemporaneous with the uplift of neighbouring HP/UHP eclogites.

Carbonic fluid (CO₂-rich) inclusions are predominant in both HP granulites and granulitized HP/UHP eclogites/garnet clinopyroxenites. They have low densities, having been reset during decompression. Minor amounts of CH₄ and/or N₂ as well as carbonate are present. In the granulitized HP/UHP eclogites/garnet clinopyroxenites, early fluids are high-salinity brines with minor N₂, whereas low-salinity fluids formed during retrogression. Syn-granulite-facies carbonic fluid inclusions occur either in quartz rods in clinopyroxene (granulitized HP garnet clinopyxeronite) or in quartz blebs in garnet and quartz matrices (UHP eclogite). For HP granulites, a limited number of primary CO₂ and mixed H₂O–CO₂(liquid) inclusions have also been observed in undeformed quartz inclusions within garnet, orthopyroxene, and plagioclase which contain abundant, low-density CO₂±carbonate inclusions. It is suggested that the primary fluid in the HP granulites was high-density CO₂, mixed with a significant quantity of water. The water was consumed by retrograde metamorphic mineral reactions and may also have been responsible for metasomatic reactions (“giant myrmekites”) occurring at quartz–feldspar boundaries. Compared with the UHP eclogites in this region, the granulites were exhumed in the presence of massive, externally derived carbonic fluids and subsequently limited low-salinity aqueous fluids, probably derived from the surrounding gneisses.     

Evolution of fluids associated with metasedimentary sequences from Chaves (North Portugal)

In order to identify and characterise fluids associated with metamorphic rocks from the Chaves region (North Portugal), fluid inclusions were studied in quartz veinlets, concordant with the main foliation, in graphitic-rich and nongraphitic-rich lithologies from areas with distinct metamorphic grade. The study indicates multiple fluid circulation events with a variety of compositions, broadly within the C–H–O–N–salt system. Primary fluid inclusions in quartz contain low salinity aqueous–carbonic, H₂O–CH₄–N₂–NaCl fluids that were trapped near the peak of regional metamorphism, which occurred during or immediately after D2. The calculated P–T conditions for the western area of Chaves (CW) is P=300–350 MPa and T500 °C, and for the eastern area (CE), P=200–250 MPa and T=400–450 °C. A first generation of secondary fluid inclusions is restricted to discrete cracks at the grain boundaries of quartz and consists of low salinity aqueous–carbonic, H₂O–CO₂–CH₄–N₂–NaCl fluids. P–T conditions from the fluid inclusions indicate that they were trapped during a thermal event, probably related with the emplacement of the two-mica granites.

A second generation of secondary inclusions occurs in intergranular fractures and is characterised by two types of aqueous inclusions. One type is a low salinity, H₂O–NaCl fluid and the second consists of a high salinity, H₂O–NaCl–CaCl₂ fluid. These fluid inclusions are not related to the metamorphic process and have been trapped after D3 at relatively low P (hydrostatic)–T conditions (P<100 MPa and T<300 °C).

Both the early H₂O–CH₄–N₂–NaCl fluids in quartz from the graphitic-rich lithologies and the later H₂O–CO₂–CH₄–N₂–NaCl carbonic fluid in quartz from graphitic-rich and nongraphitic-rich lithologies seem to have a common origin and evolution. They have low salinity, probably resulting from connate waters that were diluted by the water released from mineral dehydration during metamorphism. Their main component is water, but the early H₂O–CH₄–N₂–NaCl fluids are enriched in CH₄ due to interaction with the C-rich host rocks.

From the early H₂O–CH₄–N₂–NaCl to the later aqueous–carbonic H₂O–CO₂–CH₄–N₂–NaCl fluids, there is an enrichment in CO₂ that is more significant for the fluids associated with nongraphitic-rich lithologies.

The aqueous–carbonic fluids, enriched in H₂O and CH₄, are primarily associated with graphitic-rich lithologies. However, the aqueous–carbonic CO₂-rich fluids were found in both graphitic and nongraphitic-rich units from both the CW and CE studied areas, which are of medium and low metamorphic grade, respectively.     

P-T-X conditions of calc-silicate formation: evidence from fluid inclusions and phase equilibria; Llano Uplift, central Texas, USA

Abstract The Llano Uplift in central Texas is a Grenville aged (c. 1.1 Ga) metamorphic terrane consisting predominantly of amphibolite facies mineral assemblages. The formation of these assemblages has been attributed to the emplacement of relatively late granite plutons throughout the area. Two types of granitic intrusion have previously been recognized: (1) Town Mountain Granites, which occur as relatively large, circular-shaped bodies of coarse-grained granite, and (2) Younger Granites which are present as smaller and more irregular bodies of finer-grained granite. In the central part of the uplift, wollastonite-bearing calc-silicate rocks occur within the Valley Spring Gneiss. The development of these calc-silicate rocks has been linked to infiltrating fluids presumably derived from spatially associated Younger Granites. The stability of coexisting quartz, calcite, wollastonite, grossular and anorthite and coexisting quartz, calcite, wollastonite, andradite and hedenbergite shows that the calc-silicate rocks equilibrated under H₂O-rich conditions with χCO₂ <0.10. Fluid inclusions present within the calc-silicate minerals are H₂O-rich with salinities of <17 wt% equivalent NaCl. The absence of any detectable CO₂ in the fluid inclusions may indicate entrapment of the inclusions at lower pressures and more H₂O-rich conditions compared to the stability of the peak metamorphic mineral assemblage. Homogenization temperatures, measured for texturally primary inclusions, range from 360 to 368° C corresponding to a density range from 0.53 to 0.82 g/cm³. Isochores for these fluid inclusions, when combined with the stability of the solid-solid equilibria Grs + Qtz = Wo + An, yield formation conditions of 500–550° C at 1–2 kbar. This indicates that the granitic intrusions involved in the formation of the Blount Mountain calc-silicates were emplaced at a pressure of at least 1–2 kbar.     

Vesuvianite-wollastonite-grossular-bearing calc-silicate rock near Tatapani,Surguja district,Chhattisgarh

This paper reports the occurrence of vesvianite + wollastonite + grossular + diopside + microcline + quartz assemblage in an enclave of calc-silicate rocks occurring within quartzofeldspathic gneiss near Tatapani in the western part of Chhotanagpur Gneissic Complex. The enclave contains phlogopite-absent and phlogopite-bearing calc-silicate rocks, the latter being much more abundant than the former. The above assemblage occurs in the phlogopite-absent rock. Phlogopite-bearing rock contains the assemblage phlogopite + salite + microcline + plagioclase + quartz. A strong schistosity is developed in both the calc-silicate rocks and the minerals are syntectonic with the major foliation-forming event in the area. The vesuvianite-bearing assemblage is formed by amphibolite facies regional metamorphism of a calcareous protolith at pressure < 4 kbar and X_{CO 2} (fluid) < 0.15.     

Wollastonite and scapolite in Precambrian calc-silicate granulites from Australia and Antarctica

Abstract Scapolite, wollastonite, calcite, diopside, grossular-andradite garnet and sphene occur in calc-silicate rocks in the granulite terrain of the Arunta Block, central Australia. This assemblage buffers the CO₂ activity at a low value, so that any coexisting fluid phase must be H₂O rich and CO₂ poor ( X _co2 = 0.2-0.3). In contrast, the H₂O activity in the surrounding felsic and mafic granulites was low. Thus fluid activities during granulite facies metamorphism were locally buffered in various rock units and fluid flow appears to have been restricted or fluid may have been absent. Late retrograde rims of garnet and garnet-quartz separate phases formed in the high-grade stage. Formation of these rims would have required either an influx of water-rich fluid or a decrease in pressure. Evidence from the surrounding granulites shows that in one locality, the calc-silicate rocks had undergone late isobaric hydration; in another locality, minor uplift had occurred soon after peak P-T conditions. In both, scapolite had partly broken down to plagioclase-calite. A calc silicate rock from the granulite terrain of Enderby Land, Antarctica, contains scapolite, wollastonite, calcite, diopside, quartz and sphene; this assemblage also indicates low CO₂ activities. In this rock, wollastonite has broken down to calcite-quartz, to indicate isobaric cooling without influx of hydrous fluid.     

Proterozoic anticlockwise P–T path of the Lewisian Complex of South Harris, Outer Hebrides, NW Scotland

The Leverburgh Belt and South Harris Igneous Complex in South Harris (northwest Scotland) experienced high-pressure granulite facies metamorphism during the Palaeoproterozoic. The metamorphic history has been determined from the following mineral textures and compositions observed in samples of pelitic, quartzofeldspathic and mafic gneisses, especially in pelitic gneisses from the Leverburgh Belt: (1) some coarse-grained garnet in the pelitic gneiss includes biotite and quartz in the inner core, sillimanite in the outer core, and is overgrown by kyanite at the rims; (2) garnet in the pelitic gneiss shows a progressive increase in grossular content from outer core to rims; (3) the Al^VI/Al^IV ratio of clinopyroxene from mafic gneiss increases from core to rim; (4) retrograde reaction coronas of cordierite and hercynite+cordierite are formed between garnet and kyanite, and orthopyroxene+cordierite and orthopyroxene+plagioclase reaction coronas develop between garnet and quartz; (5) a P–T path is deduced from inclusion assemblages in garnet and from staurolite breakdown reactions to produce garnet+sillimanite and garnet+sillimanite+hercynite with increasing temperature; and (6) in sheared and foliated rocks, hydrous minerals such as biotite, muscovite and hornblende form a foliation, modifying pre-existing textures. The inferred metamorphic history of the Leverburgh Belt is divided into four stages, as follows: (M1) prograde metamorphism with increasing temperature; (M2) prograde metamorphism with increasing pressure; (M3) retrograde decompressional metamorphism with decreasing pressure and temperature; and (M4) retrograde metamorphism accompanied by shearing. Peak P–T conditions of the M2 stage are 800±30 °C, 13–14 kbar. Pressure increasing from M1 to M2 suggests thrusting of continental crust over the South Harris belt during continent–continent collision. The inferred P–T path and tectonic history of the South Harris belt are different from those of the Lewisian of the mainland.