Abundance of mass 47 CO2 in urban air, car exhaust, and human breath

Atmospheric carbon dioxide is widely studied using records of CO₂ mixing ratio, δ¹³C and δ¹⁸O. However, the number and variability of sources and sinks prevents these alone from uniquely defining the budget. Carbon dioxide having a mass of 47 u (principally ¹³C¹⁸O¹⁶O) provides an additional constraint. In particular, the mass 47 anomaly (Δ₄₇) can distinguish between CO₂ produced by high temperature combustion processes vs. low temperature respiratory processes. Δ₄₇ is defined as the abundance of mass 47 isotopologues in excess of that expected for a random distribution of isotopes, where random distribution means that the abundance of an isotopologue is the product of abundances of the isotopes it is composed of and is calculated based on the measured ¹³C and ¹⁸O values. In this study, we estimate the δ¹³C (vs. VPDB), δ¹⁸O (vs. VSMOW), δ47, and Δ₄₇ values of CO₂ from car exhaust and from human breath, by constructing ‘Keeling plots’ using samples that are mixtures of ambient air and CO₂ from these sources. δ47 is defined as , where is the R⁴⁷ value for a hypothetical CO₂ whose δ¹³C_VPDB = 0, δ¹⁸O_VSMOW = 0, and Δ₄₇ = 0. Ambient air in Pasadena, CA, where this study was conducted, varied in [CO₂] from 383 to 404 μmol mol⁻¹, in δ¹³C and δ¹⁸O from −9.2 to −10.2‰ and from 40.6 to 41.9‰, respectively, in δ47 from 32.5 to 33.9‰, and in Δ₄₇ from 0.73 to 0.96‰. Air sampled at varying distances from a car exhaust pipe was enriched in a combustion source having a composition, as determined by a ‘Keeling plot’ intercept, of −24.4 ± 0.2‰ for δ¹³C (similar to the δ¹³C of local gasoline), δ¹⁸O of 29.9 ± 0.4‰, δ47 of 6.6 ± 0.6‰, and Δ₄₇ of 0.41 ± 0.03‰. Both δ¹⁸O and Δ₄₇ values of the car exhaust end-member are consistent with that expected for thermodynamic equilibrium at∼200 °C between CO₂ and water generated by combustion of gasoline-air mixtures. Samples of CO₂ from human breath were found to have δ¹³C and δ¹⁸O values broadly similar to those of car exhaust-air mixtures, −22.3 ± 0.2 and 34.3 ± 0.3‰, respectively, and δ47 of 13.4 ± 0.4‰. Δ₄₇ in human breath was 0.76  ± 0.03‰, similar to that of ambient Pasadena air and higher than that of the car exhaust signature.     

The geochemical and isotopic record of evaporite recycling in spas and salterns of the Basque Cantabrian basin, Spain

Evaporite outcrops are rare in the Basque Cantabrian basin due to a rainy climate, but saline springs with total dissolved solids ranging from 0.8 to 260 g/L are common and have long been used to supply spas and salterns. New and existing hydrochemistry of saline springs are used to provide additional insight on the origin and underground extent of their poorly known source evaporites. Saline water hydrochemistry is related to dissolution of halite and gypsum from two evaporitic successions (Triassic “Keuper” and Lower Cretaceous “Wealden”), as supported by rock samples from outcrops and oil exploration drill cuttings. The δ³⁴S value of gypsum in the Keuper evaporites and sulfate in the springs is δ³⁴S_SO4 = 14.06 ± 1.07‰ and δ¹⁸O_SO4 = 13.41 ± 1.44‰, and the relationship between Cl/Br ratio of halite and water shows that waters have dissolved halite with Br content between 124 and 288 ppm. The δ³⁴S value of gypsum in the Wealden evaporites and sulfate in the springs is δ³⁴S_SO4 = 19.66 ± 1.76‰, δ¹⁸O_SO4 = 14.93 ± 2.35‰, and the relationship between Cl/Br ratio of halite and water shows that waters have dissolved halite with Br content between 15 and 160 ppm. Wealden evaporites formed in a continental setting after the dissolution of Keuper salt. Gypsum δ³⁴S_SO4 and δ¹⁸O_SO4 modification from Keuper to Wealden evaporites was due mainly to bacterial SO₄ reduction in an anoxic, organic matter-rich environment. Saline springs with Wealden δ³⁴S_SO4 values are present in a 70 × 20 km wide area. Saline water temperatures, their δ²H_H2O and δ¹⁸O_H2O values, and the geological structure defines a hydrogeological model, where meteoric water recharges at heights up to 620 m above spring levels and circulates down to 720 m below them, thereby constraining the height range of evaporite dissolution. Groundwater flow towards saline springs is driven by gravity and buoyancy forces constrained by a thrust and fault network.     

Note on the isotopic geochemistry of fossil-lacustrine tufas in carbonate plateau—A study from Dungul region (SW Egypt)

Lithological, chemical, and stable isotope data are used to characterize lacustrine tufas dating back to pre-late Miocene and later unknown times, capping different surfaces of a Tertiary carbonate (Sinn el-Kedab) plateau in Dungul region in the currently hyperarid south-western Egypt. These deposits are composed mostly of calcium carbonate, some magnesium carbonate and clastic particles plus minor amounts of organic matter. They have a wide range of (Mg/Ca)_molar ratios, from 0.03 to 0.3. The bulk-tufa carbonate has characteristic isotope compositions: (δ¹³C_mean = −2.49 ± 0.99‰; δ¹⁸O_mean = −9.43 ± 1.40‰). The δ¹³C values are consistent with a small input from C4 vegetation or thinner soils in the recharge area of the tufa-depositing systems. The δ¹⁸O values are typical of fresh water carbonates. Covariation between δ¹³C and δ¹⁸O values probably is a reflection of climatic conditions such as aridity. The tufas studied are isotopically similar to the underlying diagenetic marine chalks, marls and limestones (δ¹³C_mean = −2.06 ± 0.84‰; δ¹⁸O_mean = −10.06 ± 1.39‰). The similarity has been attributed to common meteoric water signatures. This raises large uncertainties in using tufas (Mg/Ca)_molar, δ¹³C and δ¹⁸O records as proxies of paleoclimatic change and suggests that intrinsic compositional differences in material sources within the plateau may mask climatic changes in the records.     

The oxygen-isotope composition of chondrules and isolated forsterite and olivine grains from the Tagish Lake carbonaceous chondrite

The oxygen-isotope compositions (obtained by laser fluorination) of hand-picked separates of isolated forsterite, isolated olivine and chondrules from the Tagish Lake carbonaceous chondrite describe a line (δ¹⁷O = 0.95 * δ¹⁸O − 3.24; R² = 0.99) similar to the trend known for chondrules from other carbonaceous chondrites. The isolated forsterite grains (Fo_99.6-99.8; δ¹⁸O = −7.2‰ to −5.5‰; δ¹⁷O = −9.6‰ to −8.2‰) are more ¹⁶O-rich than the isolated olivine grains (Fo_39.6-86.8; δ¹⁸O = 3.1‰ to 5.1‰; δ¹⁷O = −0.3‰ to 2.2‰), and have chemical and isotopic characteristics typical of refractory forsterite. Chondrules contain olivine (Fo_97.2-99.8) with oxygen-isotope compositions (δ¹⁸O = −5.2‰ to 5.9‰; δ¹⁷O = −8.1‰ to 1.2‰) that overlap those of isolated forsterite and isolated olivine. An inverse relationship exists between the Δ¹⁷O values and Fo contents of Tagish Lake isolated forsterite and chondrules; the chondrules likely underwent greater exchange with ¹⁶O-poor nebular gases than the forsterite. The oxygen-isotope compositions of the isolated olivine grains describe a trend with a steeper slope (1.1 ± 0.1, R² = 0.94) than the carbonaceous chondrite anhydrous mineral line (CCAM_slope = 0.95). The isolated olivine may have crystallized from an evolving melt that exchanged with ¹⁶O-poor gases of somewhat different composition than those which affected the chondrules and isolated forsterite. The primordial components of the Tagish Lake meteorite formed under conditions similar to other carbonaceous chondrite meteorite groups, especially CMs. Its alteration history has its closest affinities to CI carbonaceous chondrites.     

Thermal history of the unsaturated zone at Yucca Mountain,Nevada, USA

Secondary calcite, silica and minor amounts of fluorite deposited in fractures and cavities record the chemistry, temperatures, and timing of past fluid movement in the unsaturated zone at Yucca Mountain, Nevada, the proposed site of a high-level radioactive waste repository. The distribution and geochemistry of these deposits are consistent with low-temperature precipitation from meteoric waters that infiltrated at the surface and percolated down through the unsaturated zone. However, the discovery of fluid inclusions in calcite with homogenization temperatures (T_h) up to ∼80 °C was construed by some scientists as strong evidence for hydrothermal deposition. This paper reports the results of investigations to test the hypothesis of hydrothermal deposition and to determine the temperature and timing of secondary mineral deposition. Mineral precipitation temperatures in the unsaturated zone are estimated from calcite- and fluorite-hosted fluid inclusions and calcite δ¹⁸O values, and depositional timing is constrained by the ²⁰⁷Pb/²³⁵U ages of chalcedony or opal in the deposits. Fluid inclusion T_h from 50 samples of calcite and four samples of fluorite range from ∼35 to ∼90 °C. Calcite δ¹⁸O values range from ∼0 to ∼22‰ (SMOW) but most fall between 12 and 20‰. The highest T_h and the lowest δ¹⁸O values are found in the older calcite. Calcite T_h and δ¹⁸O values indicate that most calcite precipitated from water with δ¹⁸O values between −13 and −7‰, similar to modern meteoric waters.     

Effect of precipitation regime on δD values of soil n-alkanes from elevation gradients - Implications for the study of paleo-elevation

We measured δD values of long chain n-alkanes isolated from 30 surface soil samples along two elevation transects on the Tibetan Plateau differing in precipitation regime and water source. The East Asian Monsoon precipitation dominates the wetter regime on the eastern slope (from 1230 to 4300 m) of Gongga Shan on the eastern Tibetan Plateau. Precipitation from the Polar Westerlies dominates the drier region on the slope from 1900 to 5000 m in the West Kunlun Shan on the northwestern Tibetan Plateau. The decrease in δD value with elevation in the wetter region greatly exceeded that in drier region by, −1.9 ± 0.1‰/100 m and −1.4 ± 1.0‰/100 m respectively. The apparent fractionation between leaf wax and precipitation ε_wax-p values in the wetter region (ca. −164‰) were more negative than those in drier region (ca. −125‰ above 3200 m).We also measured δD values in leaves of six common living trees (values from −287‰ to −193‰) from Gongga Shan, ranging from about 2900-4200 m. The abundance-weighted average values of the n-alkanes (δD_wax) show a strong reverse correlation with sample source elevation (R² 0.78 for soils from Gongga Shan; R² 0.85 for soils from West Kunlun Shan above 3200 m), suggesting that n-alkane δD_wax faithfully records the precipitation δD and that the isotopic altitude effect of precipitation controls δD_wax altitudinal gradients in the mountains. The data show a fairly strong monotonic dependency of n-alkane δD values on elevation for the eastern Plateau, but a complex relationship between n-alkane δD values and elevation for the northwestern Plateau. The δD_wax values at sites below 3200 m from the Kunlun Shan area exhibit an unexpected positive correlation with elevation. The study confirms the potential for using sediment δD_wax values to reconstruct paleo-elevation in wetter regions, but suggests caution in applying the approach to dry regions. Our results also show it is essential to consider the intricacy of the pattern of atmospheric circulation and water sources and their influence on the lapse rate of δD values with elevation.     

Germanium isotopic variations in igneous rocks and marine sediments

A new technique for the precise and accurate determination of Ge stable isotope compositions has been developed and applied to silicate rocks and biogenic opal. The analyses were performed using a continuous flow hydride generation system coupled to a MC-ICPMS. Samples have been purified through anion- and cation-exchange resins to separate Ge from matrix elements and eliminate potential isobaric interferences. Variations of ⁷⁴Ge/⁷⁰Ge ratios are expressed as δ⁷⁴Ge values relative to our internal standard and the long-term external reproducibility of the data is better than 0.2‰ for sample size as low as 15 ng of Ge. Data are presented for igneous and sedimentary rocks, and the overall variation is 2.4‰ in δ⁷⁴Ge, representing 12 times the uncertainty of the measurements and demonstrating that the terrestrial isotopic composition of Ge is not unique. Co-variations of ⁷⁴Ge/⁷⁰Ge, ⁷³Ge/⁷⁰Ge and ⁷²Ge/⁷⁰Ge ratios follow a mass-dependent behaviour and imply natural isotopic fractionation of Ge by physicochemical processes. The range of δ⁷⁴Ge in igneous rocks is only 0.25‰ without systematic differences among continental crust, oceanic crust or mantle material. On this basis, a Bulk Silicate Earth reservoir with a δ⁷⁴Ge of 1.3 ± 0.2‰ can be defined. In contrast, modern biogenic opal such as marine sponges and authigenic glauconite displayed higher δ⁷⁴Ge values between 2.0‰ and 3.0‰. This suggests that biogenic opal may be significantly enriched in light isotopes with respect to seawater and places a lower bound on the δ⁷⁴Ge of the seawater to +3.0‰.This suggests that seawater is isotopically heavy relative to Bulk Silicate Earth and that biogenic opal may be significantly fractionated with respect to seawater. Deep-sea sediments are within the range of the Bulk Silicate Earth while Mesozoic deep-sea cherts (opal and quartz) have δ⁷⁴Ge values ranging from 0.7‰ to 2.0‰. The variable values of the cherts cannot be explained by binary mixing between a biogenic component and a detrital component and are suggestive of enrichment in the light isotope of diagenetic quartz. Further work is now required to determine Ge isotope fractionation by siliceous organisms and to investigate the effect of diagenetic processes during chert lithification.     

Isotopic constraints on ice age fluids in active geothermal systems: Reykjanes, Iceland

The Reykjanes geothermal system is located on the landward extension of the Mid-Atlantic Ridge in southwest Iceland, and provides an on-land proxy to high-temperature hydrothermal systems of oceanic spreading centers. Previous studies of elemental composition and salinity have shown that Reykjanes geothermal fluids are likely hydrothermally modified seawater. However, δD values of these fluids are as low as −23‰, which is indicative of a meteoric water component. Here we constrain the origin of Reykjanes hydrothermal solutions by analysis of hydrogen and oxygen isotope compositions of hydrothermal epidote from geothermal drillholes at depths between 1 and 3 km. δD_EPIDOTE values from wells RN-8, -9, -10 and -17 collectively range from −60 to −78‰, and δ¹⁸O_EPIDOTE in these wells are between −3.0 and 2.3‰. The δD values of epidote generally increase along a NE trend through the geothermal field, whereas δ¹⁸O values generally decrease, suggesting a southwest to northeast migration of the geothermal upflow zone with time that is consistent with present-day temperatures and observed hydrothermal mineral zones. For comparative analysis, the meteoric-water dominated Nesjavellir and Krafla geothermal systems, which have a δD_FLUID of ∼ −79‰ and −89‰, respectively, show δD_EPIDOTE values of −115‰ and −125‰. In contrast, δD_EPIDOTE from the mixed meteoric-seawater Svartsengi geothermal system is −68‰; comparable to δD_EPIDOTE from well RN-10 at Reykjanes.Stable isotope compositions of geothermal fluids in isotopic equilibrium with the epidotes at Reykjanes are computed using published temperature dependent hydrogen and oxygen isotope fractionation curves for epidote-water, measured isotope composition of the epidotes and temperatures approximated from the boiling point curve with depth. Calculated δD and δ¹⁸O of geothermal fluids are less than 0‰, suggesting that fluids of meteoric or glacial origin are a significant component of the geothermal solutions. Additionally, δD_FLUID values in equilibrium with geothermal epidote are lower than those of modern-day fluids, whereas calculated δ¹⁸O_FLUID values are within range of the observed fluid isotope composition. We propose that modern δD_EPIDOTE and δD_FLUID values are the result of diffusional exchange between hydrous alteration minerals that precipitated from glacially-derived fluids early in the evolution of the Reykjanes system and modern seawater-derived geothermal fluids. A simplified model of isotope exchange in the Reykjanes geothermal system, in which the average starting δD_ROCK value is −125‰ and the water to rock mass ratio is 0.25, predicts a δD_FLUID composition within 1‰ of average measured values. This model resolves the discrepancy between fluid salinity and isotope composition of Reykjanes geothermal fluids, explains the observed disequilibrium between modern fluids and hydrothermal epidote, and suggests that rock-fluid interaction is the dominant control over the evolution of fluid isotope composition in the hydrothermal system.     

Sulfur and carbon isotope records from 1700 to 800 Ma carbonates of the Jixian section, northern China: Implications for secular isotope variations in Proterozoic seawater and relationships to global supercontinental events

This study is a comprehensive, stable isotope survey of the marine carbonate-dominated, upper Paleo- to lower Neoproterozoic stratigraphy of Jixian County, China. Carbonate-associated sulfate (CAS) was extracted and measured for δ³⁴S_CAS using the same samples analyzed for δ¹³C_carbonate. This integrated proxy approach is a step towards a more comprehensive picture of secular variation in the composition of Proterozoic seawater. We specifically sampled marine carbonate intervals from the lower section of the Chuanlinggou Formation, Changcheng Group (ca. 1700 Ma) to the top of the Jingeryu Formation, Qingbaikou Group (ca. 800 Ma). δ¹³C_carbonate values are mostly negative in the upper Paleoproterozoic Changcheng Group, with an ascending trend from −3‰ to 0‰. We observed variation of approximately 0 ± 1‰ in the Mesoproterozoic Jixian Group, and positive values of +2 ± 2‰ characterize the lower Neoproterozoic Qingbaikou Group. Stratigraphic variations in δ³⁴S_CAS are more remarkable in their ranges and magnitudes, including conspicuously high values exceeding +30‰ in the three intervals at ca. 1700 Ma, 1300-1100 Ma, and 1000-900 Ma. In the Changcheng Group, δ³⁴S_CAS values are typically higher than +25‰, with only a few values of less than +15‰. In contrast, most of the data spanning from the Mesoproterozoic Tieling Formation of the Jixian Group to the lower Neoproterozoic Jingeryu Formation of the Qingbaikou Group are highly variable between +10‰ and +25‰, with some values exceeding +25‰.In the late Paleoproterozoic (1700-1600 Ma), a >10‰ decrease in δ³⁴S_CAS and ∼3‰ increase in δ¹³C_carbonate are coincident with, and likely related to, the breakup of Columbia, a supercontinent that predated Rodinia. Carbon and sulfur isotope data from the Mesoproterozoic, when global tectonic activity was comparatively weaker, fall mostly in the ranges of +15 ± 10‰ and 0 ± 1‰, respectively, but fluctuations of >20‰ for δ³⁴S_CAS and >3‰ for the δ¹³C_carbonate at ca. 1450-1400 Ma may reflect subduction and large-scale magmatic activity in island arcs marking the end of Columbia breakup. From the late Mesoproterozoic (ca. 1300-1100 Ma) to the early Neoproterozoic (ca. 800 Ma), the δ¹³C and δ³⁴S of seawater increased gradually with increasing variability. Most impressive areδ³⁴S_CAS values that exceed +30‰ in two intervals at ca. 1300-1100 Ma and ca. 1000-900 Ma, which may reflect the assembly and early breakup of Rodinia. Although gaps in the record remain, and studies of even higher resolution are warranted, our results suggest that changes in paleoceanographic conditions linked to global tectonics strongly influenced the biogeochemical cycles of C and S. Furthermore, periods of the Proterozoic previously noted for their isotopic invariability show clear isotopic expressions of this tectonic activity.     

Carbon and oxygen stable isotope compositions of late Pleistocene mammal teeth from dolines of Ajoie (Northwestern Switzerland)

Fossils of megaherbivores from eight late Pleistocene ¹⁴C- and OSL-dated doline infillings of Ajoie (NW Switzerland) were discovered along the Transjurane highway in the Swiss Jura. Carbon and oxygen analyses of enamel were performed on forty-six teeth of large mammals (Equus germanicus, Mammuthus primigenius, Coelodonta antiquitatis, and Bison priscus), coming from one doline in Boncourt (~ 80 ka, marine oxygen isotope stage MIS5a) and seven in Courtedoux (51–27 ka, late MIS3), in order to reconstruct the paleoclimatic and paleoenvironmental conditions of the region. Similar enamel δ¹³C values for both periods, ranging from − 14.5 to − 9.2‰, indicate that the megaherbivores lived in a C₃ plant-dominated environment. Enamel δ¹⁸O_PO4 values range from 10.9 to 16.3‰ with a mean of 13.5 ± 1.0‰ (n = 46). Mean air temperatures (MATs) were inferred using species-specific δ¹⁸O_PO4–δ¹⁸O_H2O-calibrations for modern mammals and a present-day precipitation δ¹⁸O_H2O-MAT relation for Switzerland. Similar average MATs of 6.6 ± 3.6°C for the deposits dated to ~ 80 ka and 6.5 ± 3.3°C for those dated to the interval 51–27 ka were estimated. This suggests that these mammals in the Ajoie area lived in mild periods of the late Pleistocene with MATs only about 2.5°C lower than modern-day temperatures.     

Continental-scale patterns in modern wood cellulose δO: Implications for interpreting paleo-wood cellulose δO

The isotopic composition of ancient wood may be a useful archive of some climatic or geochemical conditions of the past, but presently there are many uncertainties that constrain such interpretations. We sampled naturally growing, predominantly native trees in forested regions of North America and the Caribbean to evaluate the strength of the relationships among cellulose δ¹⁸O (δ¹⁸O_cel), relative humidity (RH), precipitation δ¹⁸O (δ¹⁸O_ppt), and mean annual temperature (MAT) at the continental scale, and the general range of variability in δ¹⁸O_cel associated with site hydrologic conditions and species differences. We found up to 4‰ differences among different species growing at the same site, that conifer cellulose at a site is more enriched than angiosperm cellulose by 1.5‰ (p < 0.001), and that differences in landscape position, reflecting differing access to the water table, produced differences of <1‰ in δ¹⁸O_cel. At the continental scale, δ¹⁸O_cel was strongly influenced by modeled δ¹⁸O_ppt (R² = 0.80, p < 0.001). Average summer minimum RH (RH_min) combined with δ¹⁸O_ppt explained more of the variability (R² = 0.93, p < 0.001) in δ¹⁸O_cel across North American and Caribbean forests. MAT and δ¹⁸O_cel were also strongly correlated across North America (R = 0.91 and 0.95, p < 0.001, for angiosperms and conifers, respectively). The difference between δ¹⁸O_ppt and δ¹⁸O_cel is not constant (varying from 35-44‰) and is inversely correlated with δ¹⁸O_ppt. The relationships among δ¹⁸O_ppt, RH_min, δ¹⁸O_cel, and MAT established for North America and the Caribbean applied reasonably well when δ¹⁸O_cel was used to estimate MAT and δ¹⁸O_ppt in Asia, Europe, and South America, but there were important exceptions. The most accurate predictions of MAT and δ¹⁸O_ppt from δ¹⁸O_cel require RH_min. Predictions of δ¹⁸O_ppt and MAT made from δ¹⁸O_cel alone produced errors of up to 8‰ and 16 °C, respectively.     

In situ U-Pb, O and Hf isotopic compositions of zircon and olivine from Eoarchaean rocks, West Greenland: New insights to making old crust

The sources and petrogenetic processes that generated some of the Earth’s oldest continental crust have been more tightly constrained via an integrated, in situ (U-Pb, O and Hf) isotopic approach. The minerals analysed were representative zircon from four Eoarchaean TTG tonalites and two felsic volcanic rocks, and olivine from one harzburgite/dunite of the Itsaq Gneiss Complex (IGC), southern West Greenland. The samples were carefully chosen from localities with least migmatisation, metasomatism and strain. Zircon was thoroughly characterized prior to analysis using cathodoluminescence, scanning electron, reflected and transmitted light imaging. The zircon from all but one sample showed only minor post-magmatic recrystallisation. ²⁰⁷Pb/²⁰⁶Pb dating of oscillatory-zoned zircon using SHRIMP RG (n = 142) indicates derivation of the felsic igneous rocks from different batches of magma at 3.88, 3.85, 3.81, 3.80 and 3.69 Ga.Analyses of ¹⁸O/¹⁶O compositions of olivine from a harzburgite/dunite (n = 8) using SHRIMP II in multi-collector mode, indicate that the oxygen isotopic composition of this sample of Eoarchaean mantle (δ¹⁸O_Ol = 6.0 ± 0.4‰) was slightly enriched in ¹⁸O, but not significantly different from that of the modern mantle. Zircon δ¹⁸O measurements from the six felsic rocks (n = 93) record mean or weighted mean compositions ranging from 4.9 ± 0.7‰ to 5.1 ± 0.4‰, with recrystallised domains showing no indication of oxygen isotopic exchange during younger tectonothermal events. δ¹⁸O_Zr compositions indicate that the primary magmas were largely in equilibrium with the mantle or mantle-derived melts generated at similar high temperatures, while calculated tonalite δ¹⁸O_WR compositions (6.7-6.9‰) resemble those of modern adakites.LA-MC-ICPMS zircon ¹⁷⁶Hf/¹⁷⁷Hf analyses were obtained from six samples (n = 122). Five samples record weighted mean initial ε_Hf compositions ranging from to 0.5 ± 0.6 to −0.1 ± 0.7 (calculated using λ¹⁷⁶Lu = 1.867 × 10⁻¹¹ yr⁻¹), while one sample records a composition of 1.3 ± 0.7, indicating the magmas were generated from a reservoir with a time averaged, near chondritic Lu/Hf. The derivation of TTG magmas from a chondritic Lu/Hf source implies either that there was not voluminous continental crustal growth nor major mantle differentiation leading to Lu/Hf fractionation during the Hadean or Eoarchaean, or alternatively that rapid recycling of an early formed crust allowed the early mantle to maintain a chondritic Lu/Hf.Previous studies have demonstrated that ancient TTG rocks were mostly produced by dehydration melting of mafic rocks within the stability field of garnet, probably in flatly-subducted or buried oceanic crust. The oxygen isotopic signatures measured here at high spatial resolution allow the source materials to be better defined. Melting of a mixed mafic source consisting of ∼80% unaltered gabbro (δ¹⁸O_WR = 5.5‰) with ∼20% hydrothermally altered gabbro/basalt (δ¹⁸O_WR = 4.0‰) would produce tonalite magmas within the average compositional range observed. ¹⁸O-enriched components such as altered shallow basaltic oceanic crust and pelagic or continental sediments were not present in the sources of these TTG melts. The absence of high ¹⁸O signatures may indicate either the rarity of low temperature altered sediments, or their effective removal from the down-going slab.     

Oxygen isotope exchange between H2O and CO2 at elevated CO2 pressures: Implications for monitoring of geological CO2 storage

Traditionally, the application of stable isotopes in Carbon Capture and Storage (CCS) projects has focused on δ¹³C values of CO₂ to trace the migration of injected CO₂ in the subsurface. More recently the use of δ¹⁸O values of both CO₂ and reservoir fluids has been proposed as a method for quantifying in situ CO₂ reservoir saturations due to O isotope exchange between CO₂ and H₂O and subsequent changes in δ¹⁸O_H2O values in the presence of high concentrations of CO₂. To verify that O isotope exchange between CO₂ and H₂O reaches equilibrium within days, and that δ¹⁸O_H2O values indeed change predictably due to the presence of CO₂, a laboratory study was conducted during which the isotope composition of H₂O, CO₂, and dissolved inorganic C (DIC) was determined at representative reservoir conditions (50 °C and up to 19 MPa) and varying CO₂ pressures. Conditions typical for the Pembina Cardium CO₂ Monitoring Pilot in Alberta (Canada) were chosen for the experiments. Results obtained showed that δ¹⁸O values of CO₂ were on average 36.4 ± 2.2‰ (1σ, n = 15) higher than those of water at all pressures up to and including reservoir pressure (19 MPa), in excellent agreement with the theoretically predicted isotope enrichment factor of 35.5‰ for the experimental temperatures of 50 °C. By using ¹⁸O enriched water for the experiments it was demonstrated that changes in the δ¹⁸O values of water were predictably related to the fraction of O in the system sourced from CO₂ in excellent agreement with theoretical predictions. Since the fraction of O sourced from CO₂ is related to the total volumetric saturation of CO₂ and water as a fraction of the total volume of the system, it is concluded that changes in δ¹⁸O values of reservoir fluids can be used to calculate reservoir saturations of CO₂ in CCS settings given that the δ¹⁸O values of CO₂ and water are sufficiently distinct.     

Microscale oxygen isotope variations in 1.9 Ga Gunflint cherts: Assessments of diagenesis effects and implications for oceanic paleotemperature reconstructions

Variations in the oxygen isotope composition (δ¹⁸O) of five cherts from the 1.9 Ga Gunflint iron formation (Canada) were studied at the micrometer scale by ion microprobe to try to better understand the processes that control δ¹⁸O values in cherts and to improve seawater paleotemperature reconstructions. Gunflint cherts show clearly different δ¹⁸O values for different types of silica with for instance a difference of ≈15‰ between detrital quartz and microquartz. Microquartz in the five samples is characterized by large intra sample variations in δ¹⁸O values, (δ¹⁸O of quartz varies from 4.6‰ to 6.6‰ at the 20 μm scale and from ≈12‰ to 14‰ at 2 μm scale). Isotopic profiles in microquartz adjacent to hydrothermal quartz veins demonstrate that microquartz more than ≈200 μm away from the veins has preserved its original δ¹⁸O value.At the micrometer spatial resolution of the ion probe, data reveal that microquartz has preserved a considerable δ¹⁸O heterogeneity that must be regarded as a signature inherited from its diagenetic history. Modelling of the δ¹⁸O variations produced during the diagenetic transformation of sedimentary amorphous silica precursors into microquartz allows us to calculate seawater temperature (T_sw at which the amorphous silica precipitated) and diagenesis temperature (T_diagenesis at which microquartz formed) that reproduce the δ¹⁸O distributions (mean, range and shape) measured at micrometer scale in microquartz. The two critical parameters in this modelling are the δ¹⁸O value and the mass fraction of the diagenetic fluid. Under these assumptions, the most likely ranges for T_sw and T_diagenesis are from 37 to 52 °C and from 130 to 170 °C, respectively.     

Indoor and outdoor urban atmospheric CO2: Stable carbon isotope constraints on mixing and mass balance

From July to November 2009, concentrations of CO₂ in 78 samples of ambient air collected in 18 different interior spaces on a university campus in Dallas, Texas (USA) ranged from 386 to 1980 ppm. Corresponding δ¹³C values varied from −8.9‰ to −19.4‰. The CO₂ from 22 samples of outdoor air (also collected on campus) had a more limited range of concentrations from 385 to 447 ppm (avg. = 408 ppm), while δ¹³C values varied from −10.1‰ to −8.4‰ (avg.=-9.0‰). In contrast to ambient indoor and outdoor air, the concentrations of CO₂ exhaled by 38 different individuals ranged from 38,300 to 76,200 ppm (avg. = 55,100 ppm), while δ¹³C values ranged from −24.8‰ to −17.7‰ (avg. = −21.8‰). The residence times of the total air in the interior spaces of this study appear to have been on the order of 10 min with relatively rapid approaches (∼30 min) to steady-state concentrations of ambient CO₂ gas. Collectively, the δ¹³C values of the indoor CO₂ samples were linearly correlated with the reciprocal of CO₂ concentration, exhibiting an intercept of −21.8‰, with r² = 0.99 and p < 0.001 (n = 78). This high degree of linearity for CO₂ data representing 18 interior spaces (with varying numbers of occupants), and the coincidence of the intercept (−21.8‰) with the average δ¹³C value for human-exhaled CO₂ demonstrates simple mixing between two inputs: (1) outdoor CO₂ introduced to the interior spaces by ventilation systems, and (2) CO₂ exhaled by human occupants of those spaces. If such simple binary mixing is a common feature of interior spaces, it suggests that the intercept of a mixing line defined by two data points (CO₂ input from the local ventilation system and CO₂ in the ambient air of the room) could be a reasonable estimate of the average δ¹³C value of the CO₂ exhaled by the human occupants. Thus, such indoor spaces appear to constitute effective “sample vessels” for collection of CO₂ that can be used to determine the average proportions of C₃ and C₄-derived C in the diets of the occupants. For the various groups occupying the rooms sampled in this study, C₄-derived C appears to have constituted ∼40% of the average diet.     

Non-biological fractionation of stable Ca isotopes in soils of the Atacama Desert, Chile

We measured Ca stable isotope ratios (δ^44/40Ca) in an ancient (2 My), hyperarid soil where the primary source of mobile Ca is atmospheric deposition. Most of the Ca in the upper meter of this soil (3.5 kmol m⁻²) is present as sulfates (2.5 kmol m⁻²), and to a lesser extent carbonates (0.4 kmol m⁻²). In aqueous extracts of variably hydrated calcium sulfate minerals, δ^44/40Ca_E values (vs. bulk Earth) increase with depth (1.4 m) from a minimum of −1.91‰ to a maximum of +0.59‰. The trend in carbonate-δ^44/40Ca in the top six horizons resembles that of sulfate-δ^44/40Ca, but with values 0.1-0.6‰ higher. The range of observed Ca isotope values in this soil is about half that of δ^44/40Ca values observed on Earth. Linear correlation among δ^44/40Ca, δ³⁴S and δ¹⁸O values indicates either (a) a simultaneous change in atmospheric input values for all three elements over time, or (b) isotopic fractionation of all three elements during downward transport. We present evidence that the latter is the primary cause of the isotopic variation that we observe. Sulfate-δ³⁴S values are positively correlated with sulfate-δ¹⁸O values (R² = 0.78) and negatively correlated with sulfate δ^44/40Ca_E values (R² = 0.70). If constant fractionation and conservation of mass with downward transport are assumed, these relationships indicate a δ^44/40Ca fractionation factor of −0.4‰ in CaSO₄. The overall depth trend in Ca isotopes is reproduced by a model of isotopic fractionation during downward Ca transport that considers small and infrequent but regularly recurring rainfall events. Near surface low Ca isotope values are reproduced by a Rayleigh model derived from measured Ca concentrations and the Ca fractionation factor predicted by the relationship with S isotopes. This indicates that the primary mechanism of stable isotope fractionation in CaSO₄ is incremental and effectively irreversible removal of an isotopically enriched dissolved phase by downward transport during small rainfall events.     

Stable isotope fractionation during bacterial sulfate reduction is controlled by reoxidation of intermediates

Bacterial sulfate reduction is one of the most important respiration processes in anoxic habitats and is often assessed by analyzing the results of stable isotope fractionation. However, stable isotope fractionation is supposed to be influenced by the reduction rate and other parameters, such as temperature. We studied here the mechanistic basics of observed differences in stable isotope fractionation during bacterial sulfate reduction. Batch experiments with four sulfate-reducing strains (Desulfovibrio desulfuricans, Desulfobacca acetoxidans, Desulfonatronovibrio hydrogenovorans, and strain TRM1) were performed. These microorganisms metabolize different carbon sources (lactate, acetate, formate, and toluene) and showed broad variations in their sulfur isotope enrichment factors. We performed a series of experiments on isotope exchange of ¹⁸O between residual sulfate and ambient water. Batch experiments were conducted with ¹⁸O-enriched (δ¹⁸O_water = +700‰) and depleted water (δ¹⁸O_water = −40‰), respectively, and the stable ¹⁸O isotope shift in the residual sulfate was followed. For Desulfovibrio desulfuricans and Desulfonatronovibrio hydrogenovorans, which are both characterized by low sulfur isotope fractionation (ε_S > −13.2‰), δ¹⁸O values in the remaining sulfate increased by only 50‰ during growth when ¹⁸O-enriched water was used for the growth medium. In contrast, with Desulfobacca acetoxidans and strain TRM1 (ε_S < −22.7‰) the residual sulfate showed an increase of the sulfate δ¹⁸O close to the values of the enriched water of +700‰. In the experiments with δ¹⁸O-depleted water, the oxygen isotope values in the residual sulfate stayed fairly constant for strains Desulfovibrio desulfuricans, Desulfobacca acetoxidans and Desulfonatronovibrio hydrogenovorans. However, strain TRM1, which exhibits the lowest sulfur isotope fractionation factor (ε_S < −38.7‰) showed slightly decreasing δ¹⁸O values.Our results give strong evidence that the oxygen atoms of sulfate exchange with water during sulfate reduction. However, this neither takes place in the sulfate itself nor during formation of APS (adenosine-5′-phosphosulfate), but rather in intermediates of the sulfate reduction pathway. These may in turn be partially reoxidized to form sulfate. This reoxidation leads to an incorporation of oxygen from water into the “recycled” sulfate changing the overall ¹⁸O isotopic composition of the remaining sulfate fraction. Our study shows that such incorporation of ¹⁸O is correlated with the stable isotope enrichment factor for sulfur measured during sulfate reduction. The reoxidation of intermediates of the sulfate reduction pathway does also strongly influence the sulfur stable isotope enrichment factor. This aforesaid reoxidation is probably dependent on the metabolic conversion of the substrate and therefore also influences the stable isotope fractionation factor indirectly in a rate dependent manner. However, this effect is only indirect. The sulfur isotope enrichment factors for the kinetic reactions themselves are probably not rate dependent.     

The origins and behaviour of carbon in a major semi-arid river,the Murray River,Australia, as constrained by carbon isotopes and hydrochemistry

δ¹³C values of dissolved inorganic C (DIC), dissolved organic C (DOC), and particulate organic C (POC) together with δ¹⁸O and δ²H values of water, δ³⁴S values of dissolved SO₄, and major ion concentrations were measured in the Murray River and its tributaries between November 2005 and April 2007 to constrain the origins and behaviour of riverine C. δ¹³C_DIC values in the Murray River vary between −9.5 and −4.7‰ with a range of <3‰ within any sampling round. δ¹³C_DIC values of the tributaries are −11.0‰ to −5.1‰. DIC concentrations of the Murray River increase from ∼25 mg/L in the middle and upper reaches of the river to 45–55 mg/L in the lower reaches. However, the mass ratio of DIC as a proportion of the total dissolved solids (TDS) decreases from ∼0.6–0.7 in the headwaters to ∼0.2–0.3 in the lower reaches of the river, with similar downstream changes in DIC/Cl ratios. This precludes simple evaporative concentration of DIC and is interpreted as the river evading CO₂; this interpretation is consistent with pCO₂ values that are in the range 550–11,200 ppm volume (ppmv), which are far higher than those in equilibrium with the atmosphere (∼360 ppmv). The δ¹³C_DIC values are similar to those that would be produced by the weathering of marine limestone (δ¹³C ∼ 0‰). However, the lack of marine limestones cropping out in the Murray–Darling Basin and the relatively uniform δ¹³C_DIC values of the Murray River (even in upland reaches where the dominant rock types are metamorphosed silicates and granites) make this unlikely. Rather the high pCO₂ values and δ¹³C_DIC values are best explained by a combination of mineralisation of low δ¹³C organic C and evasion to the atmosphere. The rate of these two processes may attain near steady state and control both DIC concentrations and δ¹³C values.