Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.     

Mineral Paragenesis of the Lepanto Copper and Gold and the Victoria Gold Deposits, Mankayan Mineral District, Philippines

Abstract: Mineral paragenesis of the alteration, ore and gangue minerals of the Lepanto epithermal copper‐gold deposit and the Victoria gold deposit, Mankayan Mineral District, Northern Luzon, Philippines, is discussed. The principal ore minerals of the Lepanto copper‐gold deposit are enargite and luzonite, with significant presence of tennantite‐tetrahedrite, chalcopyrite, sphalerite, galena, native gold/electrum and gold‐silver tellurides. Pervasive alteration zonations are commonly observed from silicification outward to advanced argillic then to propylitic zone. The ore mineralogy of the Lepanto copper‐gold deposit suggests high f_S2 in the early stages of mineralization corresponding to the deposition of the enargite‐luzonite‐pyrite assemblage. Subsequent decrease in the f_S2 formed the chalcopyrite‐tennantite‐pyrite assemblage. An increase in the f_S2 of the fluids with the formation of the covellite‐digenite‐telluride assemblage caused the deposition of native gold/electrum and gold‐silver tellurides. The principal ore minerals of the Victoria gold deposit are sphalerite, galena, chalcopyrite, tetrahedrite and native gold/electrum. The alteration halos are relatively narrow and in an outward sequence from the ore, silica alteration grades to illitic‐argillic alteration, which in turn grades to propylitic alteration. The Victoria gold mineralization has undergone early stages of silica supersaturation leading to quartz deposition. Vigorous boiling increased the pH of the fluids that led to the deposition of sulfides and carbonates. The consequent decrease in H₂S precipitated the gold. Gypsum and anhydrite mainly occur as overprints that cut the carbonate‐silica stages. The crosscutting and overprinting relationships of the Victoria quartz‐gold‐base metal veins on the Lepanto copper‐gold veins manifest the late introduction of near neutral pH hydrothermal fluids.     

黑龙江金厂金矿床18号矿体围岩蚀变及短波红外光谱特征

金厂金矿18号矿体围岩蚀变发育顺序从早到晚为:钾化、硅化、绿泥石化、绢云母化、碳酸盐化、高蛉土化,从内往外依次发育青磐岩化带、绢英岩化带和钾化带.矿化出现在泥化和绢英岩化叠加处,以及泥化和青磐岩化叠加处.通过短波红外光谱测试技术,识别出本矿区有26种蚀交矿物,其中白云母含量与金矿体呈正相关,说明绢云母化与金矿化关系密切;青磐岩化带蚀变矿物组合为绿泥石+绿帘石+伊利石±埃洛石±蒙脱石±石英;钾化带蚀变矿物组合为钾长石+高岭石+埃洛石±蒙脱石±石英;绢英岩化带蚀变矿物组合为绢云母+埃洛石±蒙脱石±高岭石±石英.     

Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran

The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.     

Genesis of the hydrothermal gold deposits in the Canan area,Lepaguare District,Honduras

The Canan area (Honduras) is characterized by a gold-bearing ore deposit that is associated with quartz-veined shear zones. Gold mineralization occurs in low-to medium-grade metamorphic host-rocks (graphitic and sericitic schists). Hydrothermal fluids, which are associated with the emplacement of Cretaceous-Tertiary granodioritic intrusions, are responsible for the formation of quartz veins and the hydrothermal alteration of wall-rocks. Three main altered zones have been detected in the wall-rocks as far as 150 cm from the quartz veins. The distal zone (up to 50-cm thick) contains quartz, chlorite and illite. The intermediate zone is the thickest (up to 80 cm) and is marked by quartz, muscovite, sulphides, kaolinite and native elements such as Au and Ag. The proximal zone, which is close to the quartz veins, is rather thin (up to 25 cm) and contains clay minerals, Al-oxides-hydroxides and sulphides. The transition from the distal to the proximal zone is accompanied by the enrichment of SiO₂ and the depletion of all other major elements, except for Fe₂O_3(tot). Precious metals occur in the highest concentrations in the intermediate zone (Au up to 7.6 ppm and Ag up to 11 ppm). We suggest that gold was transported as a reduced sulphur complex and was precipitated from the hydrothermal solution by the reaction of the sulphur complexes with Fe²⁺ from the alteration of the mafic minerals of the host-rock. Fluid–wall-rock interactions seem to be the main cause of gold mineralization. Genetic relationships with a strike-slip fault system, hydrothermal alteration zones within the metamorphic wall-rocks, and an entire set of geochemical anomalies are consistent with orogenic-type gold deposits of the epizonal class.     

Alteration Patterns Related to Hydrothermal Gold Mineralizaition in Meta-andesites at Dungash Area, Eastern Desert, Egypt

Abstract: The hydrothermal alteration patterns associating with the gold prospect hosted by metavolcanics in the Dungash area, Eastern Desert of Egypt, were investigated in order to assign their relationship to mineralization. The metavolcanics of andesitic composition are generated by regional metamorphism of greenschist facies superimposed by hydrothermal activity. Epidote and chlorite are metamorphic minerals, whereas sericite, carbonates, and chlorite are hydrothermal alteration minerals. The auriferous quartz vein is of NEE‐SWW trend and cuts mainly the andesitic metavolcanics, but sometimes extends to the neighbouring metapyroclastics and metasediments. Quartz‐sericite, sericite, carbonate‐sericite, and chlorite‐sericite constitute four distinctive alteration zones which extend outwards from the mineralized quartz vein. The quartz‐sericite and sericite zones are characterized by high contents of SiO₂, K₂O, Rb, and As, the carbonate‐sericite zone is by high contents of CaO, Au, Cu, Cr, Ni, and Y, and the chlorite‐sericite zone is by high contents of MgO, Na₂O, Zn, Ba, and Co. Gold and sulphide minerals are relatively more abundant in the carbonate‐sericite zone followed by the sericite one. The geochemistry of the alteration system was investigated using volume‐composition and mass balance calculations. The volume factors obtained for the different alteration zones, mentioned above (being 1.64, 1.19, 1.17, and 1.07, respectively), indicate that replacement had taken place with a volume gain. The mass balance calculations revealed addition of SiO₂, K₂O, As, Cu, Rb, Ba, Ni, and Y to the system as a whole and subtraction of Fe2O3 from the system. Initial high aK+ and aH+ for the invading fluids is suggested. As the fluids migrated into wallrocks, they became more concentrated in Mg, Ca, and Na with increasing activities of CO₂ and S. The calculated loss‐gain data are in agreement with the microscopic observations. Breakdown of ferromagnesian minerals and feldspars in the quartz‐sericite, sericite, and chlorite‐sericite zones accompanied by loss in Mg, Fe, Ca, and Na under acidic conditions and low CO2/H2O ratio may obstruct the formation of carbonates and sulphides, and the precipitation of gold in these zones. The role of metamorphic fluids in the area is expected to be restricted to the liberation of Au and some associated elements from their hosts.     

Gold-bearing Quartz Veins and Hydrothermal Alteration of the Paleozoic Epithermal System in the Francis Creek Area, North Queensland, Australia

Abstract. The Francis Creek area located at the Sybil graben in North Queensland, Australia, has some features of epithermal gold mineralization such as gold-bearing quartz vein and silica body hosted in rhyodacitic rocks of the Late Carboniferous Hells Gate Formation. In order to understand the nature of the paleo-hydrothermal activity in this area and to aid exploration for an economic gold deposit in this area, we carried out hydrothermal alteration mapping surrounding the veins and silica body, over an area of about 7 times 5 km².
We defined two alteration zones and inferred the center of hydrothermal activity. Fluid inclusion shows the boiling feature, and the microthermometry analysis resulted in the trapping temperature of 240°C and low salinity. This temperature is consistent with the formation temperature of clay mineral in the host rocks. On the basis of whole-rock composition, the silica body was identified as silicified rocks. Precious metal minerals such as electrum and acanthite coexist with sulfide minerals. Iodagylite was identified as a product of weathering. The sulfide minerals imply that the low-sulfidation epithermal gold mineralization occurred in the Francis Creek area.     

Mineralogical and Geochemical Characteristics of the Utanobori Gold Deposit in Northern Hokkaido,Japan

The Utanobori gold deposit is a low‐sulfidation, epithermal vein‐type deposit located in northern Hokkaido, Japan. The deposit is hosted by conglomerate, sandstone, and tuff of the Middle to Late Miocene Esashi Formation. These rocks were hydrothermally altered. Silica sinters and quartz‐adularia veins are common in the deposit. The quartz‐adularia veins either contain a ginguro band, which corresponds to the main gold‐bearing vein (Type 1 Veins), or do not contain a ginguro band but contain minor adularia (Type 2 Veins). Type 1 Veins are divided into three stages with 12–14 substages. Ore minerals identified include electrum, naumannite, chlorargyrite, bromargyrite, an unidentified Fe‐Sb mineral, and an Fe‐(Sb)‐As mineral. These ore minerals formed in the main mineralization stages I (bands I‐b and I‐d) and II (band II‐a). Scanning electron microscopy with cathodoluminescence images show that cathodoluminescence‐dark microcrystalline quartz exhibiting colloform (ghost‐sphere) texture is closely associated with ore minerals in the Type 1 Vein and Type 2 Vein, and the Al and K contents of such quartz are commonly >1000 ppm. This indicates that the ore minerals were crystallized from alkaline, silica‐saturated fluids at temperatures <200°C, which initially deposited amorphous silica that was recrystallized to microcrystalline quartz. The average Au content of electrum is 52.5 at% Au (n = 10), 65.7 at% Au (n = 20), and 55.5 at% Au (n = 5) in bands I‐b, I‐d, and II‐a, respectively, of Type 1 Veins. The δ³⁴S_CDT values of two fine‐grained disseminated pyrites in the altered conglomerate and bedded tuff in the argillic altered zone are ?4.3 and ?4.2‰. Ar‐Ar dating on adularia yielded 13.6 ± 0.06 Ma, 13.6 ± 0.07 Ma, and 13.6 ± 0.06 Ma for the stages I, II, and III of the Type 1 Vein, respectively. K‐Ar ages determined on adularia in the silica sinter and on whole‐rock of glassy rhyolite of the Esashi Formation are 15.0 ± 0.4 Ma and 14.6 ± 0.4 Ma, respectively. These radiometric ages indicate that silica sinter associated with the rhyolitic volcanic rocks formed prior to the main gold mineralization.     

Geology and Hydrothermal Alteration of the Duobuza Gold‐Rich Porphyry Copper District in the Bangongco Metallogenetic Belt,Northwestern Tibet

The Duobuza gold‐rich porphyry copper district is located in the Bangongco metallogenetic belt in the Bangongco‐Nujiang suture zone south of the Qiangtang terrane. Two main gold‐rich porphyry copper deposits (Duobuza and Bolong) and an occurrence (135 Line) were discovered in the district. The porphyry‐type mineralization is associated with three Early Cretaceous ore‐bearing granodiorite porphyries at Duobuza, 135 Line and Bolong, and is hosted by volcanic and sedimentary rocks of the Middle Jurassic Yanshiping Formation and intermediate‐acidic volcanic rocks of the Early Cretaceous Meiriqie Group. Simultaneous emplacement and isometric distribution of three ore‐forming porphyries is explained as multi‐centered mineralization generated from the same magma chamber. Intense hydrothermal alteration occurs in the porphyries and at the contact zone with wall rocks. Four main hypogene alteration zones are distinguished at Duobuza. Early‐stage alteration is dominated by potassic alteration with extensive secondary biotite, K‐feldspar and magnetite. The alteration zone includes dense magnetite and quartz‐magnetite veinlets, in which Cu‐Fe‐bearing sulfides are present. Propylitic alteration occurs in the host basic volcanic rocks. Extensive chloritization‐silicification with quartz‐chalcopyrite or quartz‐molybdenite veinlets superimposes on the potassic alteration. Final‐stage argillic alteration overlaps on all the earlier alteration. This alteration stage is characterized by destruction of feldspar to form illite, dickite and kaolinite, with accompanying veinlets of quartz + chalcopyrite + pyrite and quartz + pyrite assemblages. Cu coexists with Au, which indicates their simultaneous precipitation. Mass balance calculations show that ore‐forming elements are strongly enriched during the above‐mentioned three alteration stages.     

四川锦屏山地区金矿床的成矿机理和成因探讨

在对研究区典型金矿床的矿化地质特征、围岩蚀变特征分析的基础上,讨论了四川锦屏山地区金矿床的成矿机理和矿床成因。锦屏山地区金矿床的含矿围岩以浅变质的三叠系粉砂质片岩为主,金矿床围岩中广泛发育碳酸岩化（早期）和硅化（后期）,前者以铁白云石化为特征,后者以黄铁绢英岩化、绿泥石化和石英脉发育为特征。碳酸岩化主要发生在碳酸岩脉与泥质粉砂岩的接触带上的粉砂岩一侧,由碳酸岩脉侵入时的热液交代岩石中的泥质矿物而形成。金矿体的走向与碳酸岩化带的产状基本一致,金主要富集于硅化强烈、黄铁绢英岩化发育地段。碳酸岩化地层中具有较高的含金背景,指示成矿物质金来源于地幔,而矿化主要发生在黄铁绢英岩化和硅化带及石英硫化物脉中。结合矿床的同位素地球化学特征,认为研究区金矿的成矿作用主要是后期热液的改造作用中金元素发生再次富集的结果。金矿的形成经历了碳酸岩脉侵入、地层发生铁白云石化并初步富集形成矿源层（岩）阶段和以硫化物石英脉为代表的热液期的大规模富集成矿两个阶段,矿床的成因类型因属于改造型金矿床。     

Petrographic Characteristics and Alteration Geochemistry of Granite-hosted Tungsten Mineralization at Degana, NW India

Abstract. Vein type tungsten mineralization at Degana is genetically and spatially associated with the Degana Granite. The deposit is characterized by pervasive wall rock alteration around the mineralized quartz veins. Laterally three different alteration zones, greisen, silicification and potassic zones, are marked based on the field features, mineral assemblages and geo-chemical characteristics. In the present paper, systematic mineralogical and chemical variation in these alteration zones is reported. Thick mono-mineralic (zinnwaldite) selvages around the veins characterize the deposit. Plagioclase and alkali feldspar are low in the greisen zones while K-feldspar shows more increase than plagioclase in the potassic zone. Quartz is uniformly high in all the alteration zones, but it shows an anomalous value in the silicification zone. Al₂O₃ concentration shows initial depletion in greisen zone with gradual increase away from the contact. MgO and FeO are higher in greisen zone than silicification and potassic zones. The potassic zone is characterized by the depletion of Na₂O and higher value of K₂O.
The common presence of topaz and fluorite as both primary and secondary minerals and fluorine-bearing micas suggest fluorine partitioning in substantial amount between granitic melt and coexisting aqueous fluid phase and higher HF activity during the evolution of hydrothermal fluid. The mutual relationship of the fluorine minerals (topaz and fluorite) in the different alteration zones suggests an increase in the Ca²⁺ activity and decrease of H+ activity during the fluid evolution from greisenization towards alkali-metasomatised granite and the fluid is assumed to change from low to high activity ratio of Ca²⁺/H+.     

白崖沟金矿床围岩蚀变特征与矿化

白崖沟金矿床地处祁连-北秦岭造山带的巨大反“S”型构造南侧。金矿化受震旦-奥陶系李子园群和近EW向展布的断裂带及二长花岗岩体的控制．通过分析金矿化特征与围岩蚀变类型。认为与金矿化关系密切的热液活动主要分为4期,主要围岩蚀变类型为黄铁矿化、褐铁矿化、硅化和退色蚀变。文章总结了该矿床的矿化类型和特征．对成矿因素进行了分析,提出了找矿标志。     

Geochemical characteristics of gold mineralization of the Huai Kham On deposit,Sukhothai Fold Belt,Northern Thailand

The Huai Kham On gold deposit is located in the central part of the Sukhothai Fold Belt, northern Thailand. The Sukhothai Fold Belt represents an accretionary complex formed by subduction and collision between the Indochina and Sibumasu Terranes. There are many small gold deposits in the Sukhothai Fold Belt; however, the styles and formation environments of those gold deposits are not clear. The geology of the Huai Kham On deposit consists of volcanic and volcanosedimentary rocks, limestone, and low‐grade metamorphic rocks of Carboniferous to Triassic age. Gold‐bearing quartz veins are hosted by volcanic and volcanosedimentary rocks. The quartz veins can be divided into four stages. The mineral assemblage of the gold‐bearing quartz veins of Stages I and II comprises quartz, calcite, illite, pyrite, native gold, galena, chalcopyrite, and sphalerite. Quartz veins of Stage III consist of microcrystalline quartz, dolomite, calcite, pyrite, native gold, and chalcopyrite. Veins of Stage IV consist of calcite, dolomite, chlorite, and quartz. Fluid inclusions in quartz veins are classified into liquid‐rich two‐phase (Types I_A and I_B), carbonic‐aqueous (Type II), and carbonic (Type III) fluid inclusions. The homogenization temperatures of Types I_A and II fluid inclusions that are related to the gold‐bearing quartz veins from Stages I to III ranged from 240° to 280°C. The δ¹⁸O values of quartz veins of Stages I to III range from +12.9 to +13.4‰, suggesting the presence of a homogeneous hydrothermal solution without temperature variation such as a decrease of temperature during the formation of gold‐bearing quartz veins from Stages I to III in the Huai Kham On gold deposit. Based on the calculated formation temperature of 280°C, the δ¹⁸O values of the hydrothermal solution that formed the gold‐bearing quartz veins range from +3.2 to +3.7‰, which falls into the range of metamorphic waters. The gold‐bearing quartz veins of the Huai Kham On deposit are interpreted to be the products of metamorphic water.     

Gold Mineralization of the Gatsuurt Deposit in the North Khentei Gold Belt,Central Northern Mongolia

Mineral assemblages, chemical compositions of ore minerals, wall rock alteration and fluid inclusions of the Gatsuurt gold deposit in the North Khentei gold belt of Mongolia were investigated to characterize the gold mineralization, and to clarify the genetic processes of the ore minerals. The gold mineralization of the deposit occurs in separate Central and Main zones, and is characterized by three ore types: (i) low‐grade disseminated and stockwork ores; (ii) moderate‐grade quartz vein ores; and (iii) high‐grade silicified ores, with average Au contents of approximately 1, 3 and 5 g t^?1 Au, respectively. The Au‐rich quartz vein and silicified ore mineralization is surrounded by, or is included within, the disseminated and stockwork Au‐mineralization region. The main ore minerals are pyrite (pyrite‐I and pyrite‐II) and arsenopyrite (arsenopyrite‐I and arsenopyrite‐II). Moderate amounts of galena, tetrahedrite‐tennantite, sphalerite and chalcopyrite, and minor jamesonite, bournonite, boulangerite, geocronite, scheelite, geerite, native gold and zircon are associated. Abundances and grain sizes of the ore minerals are variable in ores with different host rocks. Small grains of native gold occur as fillings or at grain boundaries of pyrite, arsenopyrite, sphalerite, galena and tetrahedrite in the disseminated and stockwork ores and silicified ores, whereas visible native gold of variable size occurs in the quartz vein ores. The ore mineralization is associated with sericitic and siliceous alteration. The disseminated and stockwork mineralization is composed of four distinct stages characterized by crystallization of (i) pyrite‐I + arsenopyrite‐I, (ii) pyrite‐II + arsenopyrite‐II, (iii) galena + tetrahedrite + sphalerite + chalcopyrite + jamesonite + bournonite + scheelite, and iv) boulangerite + native gold, respectively. In the quartz vein ores, four crystallization stages are also recognized: (i) pyrite‐I, (ii) pyrite‐II + arsenopyrite + galena + Ag‐rich tetrahedrite‐tennantite + sphalerite + chalcopyrite + bournonite, (iii) geocronite + geerite + native gold, and (iv) native gold. Two mineralization stages in the silicified ores are characterized by (i) pyrite + arsenopyrite + tetrahedrite + chalcopyrite, and (ii) galena + sphalerite + native gold. Quartz in the disseminated and stockwork ores of the Main zone contains CO₂‐rich, halite‐bearing aqueous fluid inclusions with homogenization temperatures ranging from 194 to 327°C, whereas quartz in the disseminated and stockwork ores of the Central zone contains CO₂‐rich and aqueous fluid inclusions with homogenization temperatures ranging from 254 to 355°C. The textures of the ores, the mineral assemblages present, the mineralization sequences and the fluid inclusion data are consistent with orogenic classification for the Gatsuurt deposit.     

Mineralogical Zonation of Wall-Rock Alteration in Jiaodong Gold Province, North China

ＭＩＮＩＮＧＨＩＳＴＯＲＹＧｅｏｇｒａｐｈｉｃａｌｙｔｈｅＪｉａｏｄｏｎｇｇｏｌｄｐｒｏｖｉｎｃｅｃｏｖｅｒｓａｌｍｏｓｔｔｈｅｗｈｏｌｅＳｈａｎｄｏｎｇｏｒＪｉａｏｄｏｎｇＰｅｎｉｎｓｕｌａ,ｔｈｅｅａｓｔｅｒｎｈａｌｆｏｆｔｈｅＳｈａｎｄｏｎｇＰ...     

一种酸淋滤成因的含钼石英脉——来自小秦岭北矿带大湖-秦南矿区的证据

大湖-秦南钼矿床位于小秦岭金矿田北矿带,属于东秦岭钼钨成矿带小秦岭-外方山成矿亚带。其矿床类型为含钼石英脉型,与小秦岭北矿带含金石英脉空间上伴生。根据野外地质观察、PIMA测试等结果,对大湖-秦南含钼石英脉的产出、矿石结构构造、蚀变特征进行了研究。含钼石英脉为奶白色,易碎,发育蜂窝状、团块状、角砾状构造。角砾成分为太华群片麻岩角砾、细脉状浸染状辉钼矿化的中生代花岗斑岩角砾等。蚀变有钾化、硅化、绢云母化、高岭土化以及硬石膏化等。根据野外地质特征,蚀变可分为早期钾化+硅化+绢云母化+黄铁矿化+辉钼矿化,晚期为硅化+高岭土化+硬石膏化等。含钼石英脉中的围岩角砾或多或少地发育高岭土化。辉钼矿化主要充填于石英脉的裂隙和蜂窝中。根据包裹体显微测温数据推测含钼石英脉的成矿温度为134～463℃。含钼石英脉中的δ18 O石英值为10.7‰～11.5‰,δDH2O为-96‰～-110‰;这一特征反映了既有岩浆水,也有变质水和天水的参入,高岭土δ18 O为0.1‰～2.3‰,反映了热液成因。黄铁矿δ34S值为-5.778‰～-7.841‰,以富含轻硫为特征,反映了其形成时有生物硫参入。在此基础上,通过区域地质分析,讨论了高岭土化的成因,进而认为大湖-秦南含钼石英脉很可能是与秦岭造山带在245～211Ma全面陆陆碰撞过程有关的花岗斑岩侵位形成的斑岩型钼矿体,在后期金矿形成时,在酸性热液淋滤下进一步富集。     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.     

贵州锦丰（烂泥沟）金矿床含砷黄铁矿和脉石英及其包裹体的微量元素特征

贵州锦丰（烂泥沟）金矿是滇黔桂“金三角”目前已探明最大的卡林型金矿床。含砷黄铁矿是该矿床最主要的载金矿物,硅化及石英脉是最显著的热液蚀变类型。本文采用高精度电感耦合等离子质谱（ICP-MS）对含砷黄铁矿和脉石英及其包裹体的微量元素进行了测试,结果表明含砷黄铁矿富亲硫元素,并相对于围岩和上部地壳均强烈富集;亏损V,Sr 及高场强元素。同生黄铁矿也具有类似的特征。脉石英除亲石元素含量高以外,还表现为亲硫元素以及Mo,Bi 含量较高。但与上部地壳相比,绝大部分元素贫化。相应包裹体的微量元素含量普遍低于单矿物,但变化特征一致。结合矿物和包裹体的稀土元素分析,发现脉石英和含砷黄铁矿及其包裹体均表现为HFSE明显亏损,Th/La,Nb/La 比值小于1,说明成矿流体为富Cl 的流体。含砷黄铁矿及其包裹体中Co/Ni 比值远小于1,反映成矿温度较低,推测成矿流体主要来源于以沉积建造水为主的盆地流体。     

Geology, Fluid Inclusion and Isotopic Study of the Neoproterozoic Suoi Thau Copper Deposit, Northwest Vietnam

The Sin Quyen-Lung Po district is an important Cu metallogenic province in Vietnam, but there are few temporal and genetic constraints on deposits from this belt. Suoi Thau is one of the representative Cu deposits associated with granitic intrusion. The deposit consists of ore bodies in altered granite or along the contact zone between granite and Proterozoic meta-sedimentary rocks. The Cu-bearing intrusion is sub-alkaline I-type granite. It has a zircon U-Pb age of ~776 Ma, and has subduction-related geochemical signatures. Geochemical analysis reveals that the intrusion may be formed by melting of mafic lower crust in a subduction regime. Three stages of alteration and mineralization are identified in the Suoi Thau deposit, i.e., potassic alteration; silicification and Cu mineralization; and phyllic alteration. Two-phase aqueous fluid inclusions in quartz from silicification stage show wide ranges of homogenization temperatures(140–383℃) and salinities(4.18wt%–19.13wt%). The high temperature and high salinity natures of some inclusions are consistent with a magmatic derivation of the fluids, which is also supported by the H-O-S isotopes. Fluids in quartz have δD values of –41.9‰ to –68.8‰. The fluids in isotopic equilibrium with quartz have δ~(18)O values ranging from 7.9‰ to 9.2‰. These values are just plotted in the compositional field of magmatichydrothermal fluids in the δD_(water) versus δ~(18)O_(water) diagram. Sulfide minerals have relatively uniform δ~(34)S values from 1.84‰ to 3.57‰, which is supportive of a magmatic derivation of sulfur. The fluid inclusions with relatively low temperatures and salinities most probably represent variably cooled magmatic-hydrothermal fluids. The magmatic derivation of fluids and the close spatial relationship between Cu ore bodies and intrusion suggest that the Cu mineralization most likely had a genetic association with granite. The Suoi Thau deposit, together with other deposits in the region, may define a Neoproterozoic subduction-related ore-forming belt.     

东天山玉峰金矿热液蚀变作用与元素迁移规律

玉峰金矿位于中亚造山带东天山东缘,是近年来新发现的含银高品位金矿床。该矿床目前已探明6个金矿体,均赋存在石英斑岩中。矿区热液蚀变作用发育,与成矿关系最密切的为黄铁绢英岩化和硅化,显示明显的蚀变分带:以石英硫化物脉为中心,黄铁绢英岩化带在其两侧大致对称分布。本文选取矿体上盘和下盘的石英斑岩、黄铁绢英岩进行了全岩的主、微量元素及成矿元素测试,并对其中的长石和绢云母进行电子探针成分分析。测试结果表明,黄铁绢英岩中的Au含量较蚀变前呈指数级增长,Ag、Cu、As等成矿元素大量增加,CaO、Na_2O、P_2O_5、P_2O_5、Sr、Pb、Th、U、Sb等元素显著迁出,而SiO_2、Al_2O_3、TiO_2含量和稀土元素含量变化较小,表现稳定。热液蚀变过程中,石英斑岩中71%～76%的正长石发生绢云母化,导致K_2O大量迁出;而钠长石几乎全部蚀变为绢云母,造成Na_2O大量迁出。热液流体的贡献使得蚀变岩中MgO、Fe_2O_3~T含量成倍增加,并主要富集在绢云母和/或黄铁矿晶格中。综合分析认为,绢英岩化蚀变带,Au、Cu、As和Bi等元素的综合化探异常,低电阻率、高激化率的地球物理特征可以作为玉峰矿区深部和外围找矿的标志。研究区内的石炭纪石英斑岩带,尤其是在构造叠加部位,热液活动使其更有利于矿化富集,是找矿勘探的有利部位。