北大巴山凤凰山基底隆起晚中生代构造隆升历史

对采自于北大巴山凤凰山基底隆起8个样品的磷灰石裂变径迹年代学分析和热历史模拟表明,凤凰山基底隆起陆内造山运动结束后的隆升历史大致可以划分为2个阶段：早白垩世中晚期（135±5～95±5 Ma）缓慢隆升,晚白垩世（95±5～65±5 Ma）快速隆升。大巴山北缘韧性剪切带黑云母40Ar/39Ar坪年龄证实大巴山北缘中晚侏罗世（165.7±1.9 Ma～161.2 Ma）存在快速隆升剥蚀,其与大巴山强烈陆内造山作用阶段有关; 早白垩世中晚期缓慢隆升代表了陆内造山结束后的稳定阶段; 晚白垩世快速隆升为一次区域性隆升事件,在秦岭、大别和武当等地区均有反映,隆升过程中伴随着强烈的伸展垮塌作用,沿秦岭造山带发育一系列伸展断陷盆地。区域对比分析表明,凤凰山基底隆起隆升历史与黄陵、汉南地块接近,但与武当地块存在明显区别,反映了秦岭造山带的不均一隆升过程。南大巴山前陆带1个样品的热史模拟结果显示,南大巴山前陆带自早白垩世以来与凤凰山基底隆起经历了一致的隆升过程。     

Cratonic reactivation and orogeny: An example from the northern margin of the North China Craton

Reactivation of cratonic basement involves a number of processes including extension, compression, and/or lithospheric delamination. The northern margin of the North China Craton (NCC), adjacent to the Inner Mongolian Orogenic Belt, was reactivated in the Late Paleozoic to Early Mesozoic. During this period, the northern margin of the NCC underwent magmatism, N–S compression, regional exhumation, and uplift, including the formation of E–W-trending thick-skinned and thin-skinned south-verging folds and south-verging ductile shear zones. zircon U–Pb SHRIMP ages for mylonite protoliths in shear zones which show ages of 310–290 Ma (mid Carboniferous–Early Permian), constraining the earliest possible age of deformation. Muscovite within carbonate and quartz–feldspar–muscovite mylonites from the Kangbao–Weichang and Fengning–Longhua shear zones defines a stretching lineation and gives ⁴⁰Ar/³⁹Ar ages of 270–250 Ma, 250–230 Ma, 230–210 Ma, and 210–190 Ma. Deformation developed progressively from north to south between the Late Paleozoic and Triassic. Exhumation of lower crustal gneisses, high-pressure granulites, and granites occurred at the cratonic margin during post-ductile shearing (~ 220–210 Ma). An undeformed Early Jurassic (190–180 Ma) conglomerate overlies the deformed rocks and provides an upper age limit for reactivation and orogenesis. Deformation was induced by convergence between the southern Mongolia and North China cratonic blocks, and the location of this convergent belt controlled later deformation in the Yanshan Tectonic Province. This province formed as older E–W-trending Archean–Proterozoic sequences were reactivated along the northern margin of the NCC. This reactivation has features typical of cratonic basement reactivation: compression, crustal thickening, remelting of the mid to lower crust, and subsequent orogenesis adjacent to the orogenic belt.     

Geochronology of the initiation and displacement of the Altyn Strike-Slip Fault,western China

⁴⁰Ar/³⁹Ar dating studies have been carried out along the Dangjin Pass transect across the Altyn Strike-Slip Fault (ASSF). The samples gave ages of 445.2–454.3 Ma in the Northern Belt, 164.3–178.4 Ma in the Mesozoic Shear Zone and 26.3–36.4 Ma in the Cenozoic Shear Zone. Using the piercing point of the Bashikaogong Fault and the Cangma-Heihe Fault an offset of 350–400 km along the ASSF has been estimated. The ⁴⁰Ar/³⁹Ar dating of the syntectonic-growth or syntectonic-resetting minerals from the samples within the ASSF belt, and offset estimations from different age piercing points suggest that the ASSF should be initiated in the Middle Jurassic (178.4–160 Ma). Combined with previously reported ages, our studies show that the ASSF is characterized by multi-phase re-activation during 85–100, 25-40 and 8–10 Ma following its initiation in the Middle Jurassic in the regional tectonic setting of convergence between the Indian and Eurasian continents.     

Uplift-denudation history of the Qinling orogen: Constrained from the detrital-zircon U–Pb geochronology

This paper presents a great number of detrital zircon U–Pb ages from the Middle Triassic to the Middle Jurassic sediments in the Jiyuan basin, southern North China. The results represent age spectra from 2.9 Ga to 216 Ma, with five peaks at 2.5 Ga, 1.9 Ga, 840 Ma, 440 Ma, and 270 Ma and two grains of ∼220 Ma. The ages of 2.5 Ga and 1.9 Ga are mainly derived from the Precambrian basement of the North China Block, whereas the others are typical characteristics of the Qinling orogenic belt. An important observation is that the Qinling-sourced detrital zircons become older as the strata get younger. Samples from the Middle Triassic to early Late Triassic strata are characterized by the age peak at 270 Ma, whereas the Late Late Triassic to Early Middle Jurassic samples are dominated by age peaks at 840 Ma and 440 Ma and minor grains within 800–650 Ma. Two grains of ∼220 Ma are preserved in the Late Middle Jurassic sample, which may be contributed by the Carnian deep plutons. These signatures indicate that the unroofing pattern of the Qinling orogenic belt developed by the denudation of materials from young covers to old basements and the Carnian deep plutons. Integrated with the data reported from the Hefei Basin, it is well-established that the intensity of unroofing increased from the Qinling to the Dabie orogen in the Early Jurassic, and the denudation timing of the ultra-high pressure (UHP) and high pressure (HP) rocks or Carnian plutons changed successively from the Early Jurassic in the Dabie to the Late Middle Jurassic in the Qinling orogen.     

Early–Middle Jurassic evolution of the northern Yangtze foreland basin: a record of uplift following Triassic continent–continent collision to form the Qinling–Dabieshan orogenic belt

The northern Yangtze foreland basin system was formed during the Mesozoic continental collision between the North and South China plates along the Mianlue suture. In response to the later phase of intra-continental thrust deformation, an extensive E–W-trending molasse basin with river, deltaic, and lake deposits was produced in front of the southern Qinling–Dabieshan foreland fold-and-thrust belt during the Early–Middle Jurassic (201–163 Ma). The basin originated during the Early Jurassic (201–174 Ma) and substantially subsided during the Middle Jurassic (174–163 Ma). A gravelly alluvial fan depositional system developed in the lower part of the Baitianba Formation (Lower Jurassic) and progressively evolved into a meandering river fluvial plain and lake systems to the south. The alluvial fan conglomerates responded to the initial uplift of the southern Qinling–Dabieshan foreland fold-and-thrust belt after the oblique collision between the Yangtze and North China plates during the Late Triassic. The Qianfoya Formation (lower Middle Jurassic) mainly developed from shore-shallow lacustrine depositional systems. The Shaximiao Formation (upper Middle Jurassic) predominantly consists of thick-bedded braided river delta successions that serve as the main body of the basin-filling sequences. The upward-coarsening succession of the Shaximiao Formation was controlled by intense thrusting in the southern Qinling–Dabieshan fold-and-thrust belt. Palaeogeographic reconstructions indicated an extensive E–W foredeep depozone along the fold-and-thrust belt during the Middle Jurassic (174–163 Ma) that was nearly 150 km wide. The depozone extended westward to the Longmenshan and further east to the northern middle Yangtze plate. The northern Yangtze foreland basin was almost completely buried or modified by the subsequent differential thrusting of Dabashan and its eastern regions (Late Jurassic to Cenozoic).     

Sedimentary provenance of the Hengyang and Mayang basins,SE China,and implications for the Mesozoic topographic change in South China Craton: Evidence from detrital zircon geochronology

Detrital zircon U–Pb data from sedimentary rocks in the Hengyang and Mayang basins, SE China reveal a change in basin provenance during or after Early Cretaceous. The results imply a provenance of the sediment from the North China Craton and Dabie Orogen for the Upper Triassic to Middle Jurassic sandstones and from the Indosinian granitic plutons in the South China Craton for the Lower Cretaceous sandstones. The 90–120 Ma age group in the Upper Cretaceous sandstones in the Hengyang Basin is correlated with Cretaceous volcanism along the southeastern margin of South China, suggesting a coastal mountain belt have existed during the Late Cretaceous. The sediment provenance of the basins and topographic evolution revealed by the geochronological data in this study are consistent with a Mesozoic tectonic setting from Early Mesozoic intra-continental compression through late Mesozoic Pacific Plate subduction in SE China.     

Rapid cooling of the Yanshan Belt,northern China: Constraints from 40Ar/39Ar thermochronology and implications for cratonic lithospheric thinning

The Yanshan Orogenic Belt is located in the northern part of the North China Craton (NCC), which lost ∼120 km of lithospheric mantle during Phanerozoic tectonic reactivation. Mesozoic magmatism in the Yanshan fold-and-thrust belt began at 195–185 Ma (Early Jurassic), with most of the granitic plutons being Cretaceous in age (138–113 Ma). Along with this magmatism, multi-phase deformational structures, including multiple generations of folds, thrust and reverse faults, extensional faults, and strike-slip faults are present in this belt. Previous investigations have mostly focused on geochemical and isotopic studies of these magmatic rocks, but not on the thermal history of the Mesozoic plutons. We have applied ⁴⁰Ar/³⁹Ar thermochronology to biotites and K-feldspars from several Lower Cretaceous granitic plutons to decipher the cooling and uplift history of the Yanshan region. The biotite ⁴⁰Ar/³⁹Ar ages of these plutons range from 107 to 123 Ma, indicating that they cooled through about 350 °C at that time. All the K-feldspar step-heating results modeled using multiple diffusion domain theory yield similarly rapid cooling trends, although beginning at different times. Two rapid cooling phases have been identified at ca. 120–105 and 100–90 Ma. The first phase of rapid cooling occurred synchronously with widespread extensional deformation characterized by the formation of metamorphic core complexes, A-type magmatism, large-scale normal faults, and the development of half-graben basins. This suggests rapid exhumation took place in an extensional regime and was a shallow-crustal-level response to lithospheric thinning of the NCC. The second phase of rapid cooling was probably related to the regional uplift and unroofing of the Yanshan Belt, which is consistent with the lack of Upper Cretaceous sediments in most of the Yanshan region.     

Thermochronological record of Middle–Late Jurassic magmatic reheating to Eocene rift-related rapid cooling in the SE South China Block

We investigate the Mesozoic–Cenozoic thermal history of the Daxi region (central SE South China Block) to evaluate the influence of the subduction of the Paleo-Pacific oceanic plate beneath the SE South China Block along the block's southeast margin on the tectonothermal evolution of the upper plate. We apply a multi-chronological approach that includes U-Pb geochronology on zircon, ⁴⁰Ar/³⁹Ar dating on muscovite and biotite from granitic rocks as well as fission-track and (U-Th-Sm)/He analyses on zircon and apatite from granitic and sedimentary rocks. The Heping granite, located in the Daxi region, has a magmatic age of ca. 441 Ma. The biotite ⁴⁰Ar/³⁹Ar ages of ca. 193 Ma for the Early Jurassic Shibei granite and ca. 160 Ma for the Late Jurassic Fogang granite, respectively, reflect magmatic cooling. The Triassic Longyuanba granite yielded a muscovite ⁴⁰Ar/³⁹Ar age of ca. 167 Ma, recording heating to ≥ 350 °C induced by nearby intrusion of Middle Jurassic granites. Zircon fission-track and (U-Th-Sm)/He ages from Lower Carboniferous–Lower Jurassic sandstones (140–70 Ma) record continuous cooling during the Cretaceous that followed extensive Middle–Late Jurassic magmatism in the Daxi region. Cretaceous cooling is related to exhumation in an extensional tectonic setting, consistent with lithospheric rebound due to foundering and rollback of the subducted Paleo-Pacific oceanic plate. Apatite fission-track (53–42 Ma) and (U-Th-Sm)/He ages (43–36 Ma), and thermal modelling document rapid cooling in the Paleocene–Eocene, which temporally coincides with continental rifting in the SE South China Block in the leadup to the opening of the South China Sea.     

Phanerozoic polyorogenic deformation in southern Jiuling Massif,northern South China block: Constraints from structural analysis and geochronology

The structure of the Jiuling Massif has been investigated in order to delineate the polyorogenic deformation and discuss its geodynamic evolution and orogenic mechanisms. Detailed structural analysis indicates that the D₁ event is characterized by top-to-the NNW ductile shearing with pervasive foliation, and mineral and stretching lineation developed in the entire region. Compared with the D₁ deformation, D₂ structures are localized in ductile shear zones with subvertical foliation and subhorizontal E–W trending lineation, indicating a dextral ductile shearing. The D₃ event, marked by folds and thrusts mainly in a brittle domain, modified the D₁ structures by asymmetrical folds. The dominant D₄ structures are gravitational folds and normal faults, corresponding to a later extension. Our new geochronological data suggest that the D₁ event occurred between 465 and 380 Ma with D₂ dextral shearing at the end of this Early Paleozoic orogen, and the D₃ event has been constrained at 245–215 Ma. The final uplift of the Jiuling Massif by the D₄ event can be correlated with the Late Mesozoic extension across the eastern South China block. Along with previous studies in the South China block, the structural pattern of the Jiuling Massif elucidates the influence of the Early Paleozoic and Early Mesozoic intracontinental belts triggered by repeated reactivation of the Jiangshan–Shaoxing Fault. Combined with deformation to the south, the Early Paleozoic belt shows a positive flower pattern, with opposing kinematics, rooted in the Jiangshan–Shaoxing Fault. During the Early Mesozoic, a general intracontinental belt was developed with uniform kinematics in both the Jiuling Massif and the Xuefengshan Belt, possibly resulted from the far-field effect of the Triassic NW-directed Paleo-Pacific subduction.     

Structural analysis of the Baolun gold deposit,Hainan Island,South China: Implications for metallogeny

The Baolun gold deposit is a mesothermal orogenic gold deposit located in the southwestern part of Hainan Island, South China. The deposit comprises a series of NNW-trending quartz-sulfide lodes situated within a parallel array of fault zones traversing a sequence of variably foliated flysch siliciclastic rocks of the Lower Silurian. Detailed field mapping documented at least five phases of deformation in the deposit including NNW-trending folding of the Lower Silurian rocks (D1), development of NNW-trending, steeply dipping ductile shear zones with an oblique dextral sense corresponding to NNE-SSW shortening (D2), WNW-ESE shortening and extension associated with an early oblique sinistral ductile shearing along the NNW-trending fault zones (D3), ENE-WSW shortening (D4), and near N-S extension (D5). The gold-bearing quartz lodes cut the strata folded in the D1, show some laminar layering related to ductile shear in the D2 and are overprinted by brittle structures formed in the D3 to D5. ⁴⁰Ar–³⁹Ar dating on muscovite from an auriferous quartz lode yielded an age of 242 ± 2.5 Ma, which, together with the age of 232 ± 2.5 Ma for an aplite vein in the deposit, suggests that the mineralization may be related to a tectono-thermal event in the Triassic. In the context of the southern South China plate tectonics, the formation of the Baolun gold deposit is interpreted to be related to the oblique dextral ductile shearing (D2) along the NNW-trending fault zones during the Indosinian orogeny, in relation to the convergence between the Indochina and South China plates.     

U-Pb and Ar/Ar geochronological constraints on the exhumation history of the North Qinling terrane, China

The amphibolite facies grade North Qinling metamorphic unit forms the centre of the Qinling orogenic belt. Results of LA-ICP-MS U-Pb zircon, ⁴⁰Ar/³⁹Ar amphibole and biotite dating reveal its Palaeozoic tectonic history. U-Pb zircon dating of migmatitic orthogneiss and granite dykes constrains the age of two possible stages of migmatization at 517 ± 14 Ma and 445 ± 4.6 Ma. A subsequent granite intrusion occurred at 417 ± 1.6 Ma. The ⁴⁰Ar/³⁹Ar plateau ages of amphibole ranging from 397 ± 33 Ma to 432 ± 3.4 Ma constrain the cooling of the Qinling complex below ca. 540 °C and biotite ⁴⁰Ar/³⁹Ar ages at about 330–368 Ma below ca. 300 °C. The ages are used to construct a cooling history with slow/non-exhumation during 517– 445 Ma, a time-integrated cooling at a rate < 2.5 °C/Ma during the period of 445–410 Ma, an acceleration of cooling at a rate of 8 °C/Ma from 397 Ma to 368 Ma, and subsequently slow/non-cooling from 368 to 330 Ma. The data show a significant delay in exhumation after peak metamorphic conditions and a long period of tectonic quiescence after the suturing of the North China and South China blocks along the Shangdan suture. These relationships exclude classical exhumation models of formation and exhumation of metamorphic cores in orogens, which all imply rapid cooling after peak conditions of metamorphism.     

An 40Ar–39Ar investigation of the Mertz Glacier area (George V Land,Antarctica): Implications for the Ross Orogen–East Antarctic Craton relationship and Gondwana reconstructions

George V Land (Antarctica) includes the boundary between Late Archean–Paleoproterozoic metamorphic terrains of the East Antarctic craton and the intrusive and metasedimentary rocks of the Early Paleozoic Ross–Delamerian Orogen. This therefore represents a key region for understanding the tectono-metamorphic evolution of the East Antarctic Craton and the Ross Orogen and for defining their structural relationship in East Antarctica, with potential implications for Gondwana reconstructions. In the East Antarctic Craton the outcrops closest to the Ross orogenic belt form the Mertz Shear Zone, a prominent ductile shear zone up to 5 km wide. Its deformation fabric includes a series of progressive, overprinting shear structures developed under different metamorphic conditions: from an early medium-P granulite-facies metamorphism, through amphibolite-facies to late greenschist-facies conditions. ⁴⁰Ar–³⁹Ar laserprobe data on biotite in mylonitic rocks from the Mertz Shear Zone indicate that the minimum age for ductile deformation under greenschist-facies conditions is 1502 ± 9 Ma and reveal no evidence of reactivation processes linked to the Ross Orogeny. ⁴⁰Ar–³⁹Ar laserprobe data on amphibole, although plagued by excess argon, suggest the presence of a ∼1.7 Ga old phase of regional-scale retrogression under amphibolite-facies conditions. Results support the correlation between the East Antarctic Craton in the Mertz Glacier area and the Sleaford Complex of the Gawler Craton in southern Australia, and suggest that the Mertz Shear Zone may be considered a correlative of the Kalinjala Shear Zone. An erratic immature metasandstone collected east of Ninnis Glacier (∼180 km east of the Mertz Glacier) and petrographically similar to metasedimentary rocks enclosed as xenoliths in Cambro–Ordovician granites cropping out along the western side of Ninnis Glacier, yielded detrital white-mica ⁴⁰Ar–³⁹Ar ages from ∼530 to 640 Ma and a minimum age of 518 ± 5 Ma. This pattern compares remarkably well with those previously obtained for the Kanmantoo Group from the Adelaide Rift Complex of southern Australia, thereby suggesting that the segment of the Ross Orogen exposed east of the Mertz Glacier may represent a continuation of the eastern part of the Delamerian Orogen.     

Neoproterozoic,Paleozoic, and Mesozoic granitoid magmatism in the Qinling Orogen,China: Constraints on orogenic process

The Qinling Orogen is one of the main orogenic belts in Asia and is characterized by multi-stage orogenic processes and the development of voluminous magmatic intrusions. The results of zircon U–Pb dating indicate that granitoid magmatism in the Qinling Orogen mainly occurred in four distinct periods: the Neoproterozoic (979–711 Ma), Paleozoic (507–400 Ma), and Early (252–185 Ma) and Late (158–100 Ma) Mesozoic. The Neoproterozoic granitic magmatism in the Qinling Orogen is represented by strongly deformed S-type granites emplaced at 979–911 Ma, weakly deformed I-type granites at 894–815 Ma, and A-type granites at 759–711 Ma. They can be interpreted as the products of respectively syn-collisional, post-collisional and extensional setting, in response to the assembly and breakup of the Rodinia supercontinent. The Paleozoic magmatism can be temporally classified into three stages of 507–470 Ma, 460–422 Ma and ∼415–400 Ma. They were genetically related to the subduction of the Shangdan Ocean and subsequent collision of the southern North China Block and the South Qinling Belt. The 507–470 Ma magmatism is spatially and temporally related to ultrahigh-pressure metamorphism in the studied area. The 460–422 Ma magmatism with an extensive development in the North Qinling Belt is characterized by I-type granitoids and originated from the lower crust with the involvement of mantle-derived magma in a collisional setting. The magmatism with the formation age of ∼415–400 Ma only occurred in the middle part of the North Qinling Belt and is dominated by I-type granitoid intrusions, and probably formed in the late-stage of a collisional setting. Early Mesozoic magmatism in the study area occurred between 252 and 185 Ma, with the cluster in 225–200 Ma. It took place predominantly in the western part of the South Qinling Belt. The 250–240 Ma I-type granitoids are of small volume and show high Sr/Y ratios, and may have been formed in a continental arc setting related to subduction of the Mianlue Ocean between the South Qinling Belt and the South China Block. Voluminous late-stage (225–185 Ma) magmatism evolved from early I-type to later I-A-type granitoids associated with contemporaneous lamprophyres, representative of a transition from syn- to post-collisional setting in response to the collision between the North China and the South China blocks. Late Mesozoic (158–100 Ma) granitoids, located in the southern margin of the North China Block and the eastern part of the North Qinling Belt, are characterized by I-type, I- to A-type, and A-type granitoids that were emplaced in a post-orogenic or intraplate setting. The first three of the four periods of magmatism were associated with three important orogenic processes and the last one with intracontinental process. These suggest that the tectonic evolution of the Qinling Orogen is very complicated.     

Late Mesozoic compressional to extensional tectonics in the Yiwulüshan massif,NE China and their bearing on the Yinshan–Yanshan orogenic belt: Part II: Anisotropy of magnetic susceptibility and gravity modeling

Granitoids play an important role in deciphering both crustal growth and tectonic evolution of Earth. In the eastern end of the Yinshan–Yanshan belt of North China Craton, the Yiwulüshan massif is a typical region that presents the tectonic evolution features of this belt. Our field work on the host rocks has demonstrated two phases of opposite tectonics: compressional and extensional, however, the deformation is almost invisible in the intrusive rocks. To improve the understanding of the tectonic evolution of the Yiwulüshan massif and the Late Mesozoic tectonics of East Asia, a multidisciplinary study has been carried out. In this study, anisotropy of magnetic susceptibility (AMS) and gravity modeling have been applied on these Jurassic plutons (Lüshan, Jishilazi and Guanyindong), which intrude into the Yiwulüshan massif. According to laboratory measurements and microscopic observations on thin sections, the AMS of the Yiwulüshan massif is characterized by secondary fabrics, indicating that the intensive post solidus deformation has reset the (primary) magmatic magnetic fabrics. A relatively gentle NW dipping magnetic foliation has been identified with two distinct groups of magnetic lineations of N34°E and N335°E orientations, namely L_M1 and L_M2, relatively. Gravity modeling reveals a southward thinning of the massif with a possible feeding zone rooted in the northern part of the massif. Integrating all results from structural observation, geochronological investigation, AMS measurement and gravity modeling, two tectonic phases have been identified in the Yiwulüshan massif, posterior to the Jurassic (180–160 Ma) magmatism in the Yinshan–Yanshan area. The early one concerns a Late Jurassic–Early Cretaceous (~ 141 Ma) compressional event with a top-to-the-south to southwest sense of shear. The second one shows an Early Cretaceous (~ 126 Ma) NW–SE ductile extensional shearing. At that time, sedimentary basins widened and Jurassic plutons started to be deformed under post solidus conditions. In fact, the NW–SE trend of the maximum stretching direction is a general feature of East Asian continent during Late Mesozoic.     

U–Pb detrital zircon geochronology and its implications: The early Late Triassic Yanchang Formation,south Ordos Basin,China

U–Pb detrital zircon geochronology has been used to identify provenance and document sediment delivery systems during the deposition of the early Late Triassic Yanchang Formation in the south Ordos Basin. Two outcrop samples of the Yanchang Formation were collected from the southern and southwestern basin margin respectively. U–Pb detrital zircon geochronology of 158 single grains (out of 258 analyzed grains) shows that there are six distinct age populations, 250–300 Ma, 320–380 Ma, 380–420 Ma, 420–500 Ma, 1.7–2.1 Ga, and 2.3–2.6 Ga. The majority of grains with the two oldest age populations are interpreted as recycled from previous sediments. Multiple sources match the Paleozoic age populations of 380–420 and 420–500 Ma, including the Qilian–Qaidam terranes and the North Qilian orogenic belt to the west, and the Qinling orogenic belt to the south. However, the fact that both samples do not have the Neoproterozoic age populations, which are ubiquitous in these above source areas, suggests that the Late Triassic Yanchang Formation in the south Ordos Basin was not derived from the Qilian–Qaidam terranes, the North Qilian orogenic belt, and the Qinling orogenic belt. Very similar age distribution between the Proterozoic to Paleozoic sedimentary rocks and the early Late Triassic Yanchang Formation in the south Ordos Basin suggests that it was most likely recycled from previous sedimentary rocks from the North China block instead of sediments directly from two basin marginal deformation belts.     

秦岭造山带内宁陕断裂带构造演化及其意义

宁陕断裂是秦岭造山带内部发育的一条近东西向区域性断裂。研究表明,宁陕断裂运动学性质为左行走滑,变形早期为韧性变形,晚期叠加脆性变形。早期变形形成的同变形变质矿物的⁴⁰Ar-³⁹Ar定年结果显示,变形时代为169~162Ma左右,属于秦岭造山带碰撞后陆内变形阶段产物。宁陕左行走滑断裂的存在暗示着在中晚侏罗世之前,现今南秦岭构造带很可能分属于两个不同的构造单元。宁陕断裂北西侧具有古老变质基底,并有大量早中生代花岗岩体侵入;南东侧只发育中上元古宙浅变质火山-沉积组合,发育晚元古宙-早古生代基性侵入岩脉及一些碱性岩脉。中晚侏罗世-早白垩世期间,围绕着扬子地块西缘和北缘,发生过左行走滑变形,这可能与扬子地块在这个时期的顺时针旋转相关。     

Triassic high-strain shear zones in Hainan Island (South China) and their implications on the amalgamation of the Indochina and South China Blocks: Kinematic and Ar/Ar geochronological constraints

A kinematic and geochronological study has been carried out on the Triassic high-strain shear zones in Hainan Island, the southern South China Block. There are WNW- and NE-trending high-strain shear zones with greenschist- to amphibolite-facies metamorphism in this island. Kinematic indicators suggest a dextral top-to-the-NNE thrust shearing for the WNW-trending high-strain shear zones and a sinistral top-to-the-SE thrust shearing for the NE-trending shear zones. The quartz c-axis orientations of mylonitic rocks exhibit the domination of basal slip and some activation of a rhombohedra gliding system. The timing of shearing for these shear zones has been constrained by the ⁴⁰Ar/³⁹Ar dating analyses of synkinematic minerals. Middle Triassic (242–250 Ma) and late Triassic–early Jurassic (190–230 Ma) have been identified for the WNW- and NE-trending shear zones, respectively. A synthesis of these kinematic and thermogeochronological data points to a two-stage tectonic model for Hainan Island, that is, top-to-the-NNE oblique thrusting at 240–250 Ma followed by top-to-the-SE oblique thrusting at 190–230 Ma. In combination with the available data from the southern South China and Indochina Blocks, it is inferred that South Hainan and North Hainan have affinity to the Indochina and South China Blocks, respectively. The tectonic boundary between South Hainan and North Hainan lies roughly along the WNW-trending Changjiang–Qionghai tectonic zone probably linking to the Song Ma and Ailaoshan zones. The middle Triassic structural pattern of Hainan Island is spatially and temporally compatible with those of the South China and Indochina Blocks, and thus might be a derivation from the amalgamation of the Indochina with South China Blocks in response to the closure of the Paleotethys Ocean and subsequent subduction/collision.     

Temporal consistency between granite evolution and tungsten mineralization in Huamei'ao,southern Jiangxi Province,China: Evidence from precise zircon U–Pb,molybdenite Re–Os,and muscovite 40Ar–39Ar isotope geochronology

The large Huamei'ao tungsten deposit, with total WO₃ reserves of 67,400 tons at an average grade of 1.334% WO₃, is located in the convergent zone of the eastern Nanling E–W-trending tectono-magmatic belt and the western Wuyishan NNE–SSW-trending tectono-magmatic belt in southern Jiangxi Province, China. The tungsten mineralization in this deposit is mainly found in quartz–wolframite veins, with most orebodies distributed at the outer contact zone between concealed Late Jurassic granitic stocks and Sinian weakly metamorphosed sandstones and phyllites. Zircons collected from medium- to fine-grained biotite granite in a diamond drill hole at a sea level of ca. − 10 m yield a crystallization age of 159.9 (± 1.2) Ma through laser ablation–multicollector–inductively coupled plasma–mass spectrometry (LA–MC–ICP–MS) U–Pb dating. Molybdenite and muscovite that were both separated from quartz–wolframite veins yield a Re–Os isochron age of 158.5 (± 3.3) Ma and an ⁴⁰Ar–³⁹Ar weighted plateau age of 157.9 (± 1.1) Ma, respectively. These dates, obtained via three independent geochronological techniques, constrain the ore-forming age of the Huamei'ao deposit and link the genesis of the ore and the underlying granite. Analyses of available high-precision zircon U–Pb, molybdenite Re–Os and muscovite ⁴⁰Ar–³⁹Ar radiometric ages of major W–Sn deposits in southern Jiangxi Province indicate that there is no significant time interval between W–Sn mineralization and its intimately associated parent granite emplacement (interval of 0–6 Ma). These deposits formed over three intervals during the Mesozoic (240–210, 170–150, and 130–90 Ma), with large-scale W–Sn mineralization occurring mainly between 160 and 150 Ma. The majority of W–Sn deposits in this region are located in southern Jiangxi and southern Hunan provinces.     

150 Million year history of North China Craton disruption preserved in Mesozoic sediments of the Ordos basin

ABSTRACT

The Ordos Basin, situated in the western part of the North China Craton, preserves the 150-million-year history of North China Craton disruption. Those sedimentary sources from Late Triassic to early Middle Jurassic are controlled by the southern Qinling orogenic belt and northern Yinshan orogenic belt. The Middle and Late Jurassic deposits are received from south, north, east, and west of the Ordos Basin. The Cretaceous deposits are composed of aeolian deposits, probably derived from the plateau to the east. The Ordos Basin records four stages of volcanism in the Mesozoic–Late Triassic (230–220 Ma), Early Jurassic (176 Ma), Middle Jurassic (161 Ma), and Early Cretaceous (132 Ma). Late Triassic and Early Jurassic tuff develop in the southern part of the Ordos Basin, Middle Jurassic in the northeastern part, while Early Cretaceous volcanic rocks have a banding distribution along the eastern part. Mesozoic tectonic evolution can be divided into five stages according to sedimentary and volcanic records: Late Triassic extension in a N–S direction (230–220 Ma), Late Triassic compression in a N–S direction (220–210 Ma), Late Triassic–Early Jurassic–Middle Jurassic extension in a N–S direction (210–168 Ma), Late Jurassic–Early Cretaceous compression in both N–S and E–W directions (168–136 Ma), and Early Cretaceous extension in a NE–SW direction (136–132 Ma).     

Oligo-Miocene shearing along the Ailao Shan–Red River shear zone: Constraints from structural analysis and zircon U/Pb geochronology of magmatic rocks in the Diancang Shan massif, SE Tibet, China

The left-lateral strike-slip shearing along the Ailao Shan–Red River (ASRR) shear zone in the Southeastern Tibet, China, has been widely advocated to be a result of the Indian–Eurasian plate collision and post-collisional processes. The Diancang Shan (DCS) massif, which occurs at the northwestern extension of the Ailao Shan massif, is a typical high-grade metamorphic complex aligned along the ASRR tectonic belt. Structural and microstructural analysis of the plutonic intrusions in the DCS revealed different types of granitic intrusions spatially confined to the shear zone and temporally related to the left-lateral shearing along the ASRR shear zone in the DCS massif. The combined structural and geochronological results of SHRIMP-II and LA-ICP-MS zircon U/Pb isotopic dating have revealed successive magmatic intrusions and crystallization related to the Oligo-Miocene shearing in the DCS massif. The pre-, early- and syn-kinematic emplacements are linked to regional high-temperature deformation (lower amphibolite facies) at relatively deep crustal levels. The zircon U/Pb geochronological results suggest that the left-lateral ductile shearing along the ASRR shear zone was initiated at ca. 31 Ma, culminated between ca. 27 and 21 Ma resulting in high-temperature metamorphic conditions and slowed down at ca. 20 Ma at relatively low-temperatures.