TYPE AND DISPLACEMENT CHARACTERISTICS OF LINGSHAN M6¾ EARTHQUAKE SURFACE RUPTURE ZONE IN 1936, GUANGXI

On April 1, 1936, an M6¾ earthquake occurred on the Fangcheng-lingshan Fault. So far, the Lingshan M6¾ earthquake is the biggest one in South China. There are some reports about the Lingshan earthquake fissures, but its surface rupture hasn't been systemically studied. Based on the geological mapping and measurement of the right-lateral displacement and vertical offset, the surface rupture zone caused by the Lingshan M6¾ earthquake was found, which contains two secondary surface rupture zones in the east and west respectively, its strike varies from N55°E to N60°E with en echelon-like distribution along the north section of Lingshan Fault, and its total length is about 12.5km. The western surface rupture zone locates intermittently along Gaotang-Xiatang-Liumeng, about 9.4km in length, with a right-lateral displacement of 0.54~2.9m and a vertical offset of 0.23~1.02m; the other one appears between Jiaogenping and Hekou, about 3.1km in length, with a right-lateral displacement of 0.36~1.3m and a vertical offset of 0.15~0.57m. The maximum right-lateral displacement and vertical offset are 2.9m and 1.02m, appearing at the east of Xiatang reservoir. The types of surface rupture mainly contain earthquake fault, earthquake scarp, earthquake fissure, earthquake colluvial wedge, earthquake caused landslide and liquefaction of sand and so on. The earthquake fault develops at the east of Xiatang and Jiaogenping, earthquake scarp appears at Xiaoyilu and Xiatang, earthquake fissure locates at Xiatang, there are multiple earthquake landslides along the surface rupture zone, and the trench LSTC03 exposes the earthquake colluvial wedge. In order to further investigate the Lingshan earthquake surface rupture zones, the author compares the parameters of Lingshan M6¾ earthquake with the similar typical earthquakes in western China, the results show that the parameters of Lingshan earthquake are similar to the typical earthquakes in western China. The length of Lingshan earthquake surface rupture is shorter, but the dislocation is bigger. The author considers that this is mainly related with the parameters of Lingshan earthquake, site condition and structural environment of surface rupture zone, the symbols of dislocation measuring, human activity and weather condition and so on. The research of surface rupture zone features and analysis of Lingshan M6¾ earthquake provides important and basic data for exploring the seismogenic structure of Lingshan M6¾ earthquake, and it has important scientific significance.     

1936年广西灵山M6? 地震参数讨论

1936年广西灵山M6? 地震是华南沿海地震带内陆地区有地震记载以来发生的最大地震,由于当时仪器记录缺乏、时代相隔较长且未进行详细的现场调查,对该地震的基本参数尚存争议。本文在概述该地震地表破裂带基本特征的基础上,利用地震地表破裂带长度和最大同震位移等数据重新讨论了该地震的基本参数和发震构造。研究结果表明1936年灵山M6? 地震的宏观震中位于灵山断裂北段与友僚—蕉根坪断裂交会处一带,震级为M6.8左右,震中烈度达Ⅸ度强,罗阳山西北麓的灵山断裂为该地震的发震构造。      

NEW EVIDENCES OF HOLOCENE ACTIVITY IN THE JIANGSU SEGMENT OF ANQIU-JUXIAN FAULT OF THE TANLU FAULT ZONE

Anqiu-Juxian Fault is an important fault in the Tanlu fault zone, with the largest seismic risk, the most recent activity date and the most obvious surface traces. It is also the seismogenic fault of the Tancheng M8 1/2 earthquake in 1668. There are many different views about the southern termination location of surface rupture of the Tancheng earthquake and the Holocene activity in Jiangsu segment of this fault. Research on the latest activity time of the Jiangsu segment of Anqiu-Juxian Fault, particularly the termination location of surface rupture of the Tancheng earthquake, is of great significance to the assessment of its earthquake potential and seismic risk. Based on trench excavation on the Jiangsu segment of Anqiu-Juxian Fault, we discuss the time and characteristics of its latest activity. Multiple geological sections from southern Maling Mountain to Chonggang Mountain indicate that there was an ancient seismic event occurring in Holocene on the Jiangsu segment of Anqiu-Juxian Fault. We suggest the time of the latest seismic event is about(4.853±0.012)~(2.92±0.3)ka BP by dating results. The latest activity is characterized by thrust strike-slip faulting, with the maximum displacement of 1m. Combined with the fault rupture characteristics of each section, it is inferred that only one large-scale paleo-earthquake event occurred on the Jiangsu segment of Anqiu-Juxian Fault since the Holocene. The upper parts of the fault are covered by horizontal sand layers, not only on the trench in the west of Chonggang mountain but also on the trench in Hehuan Road in Suqian city, which indicates that the main part of the Jiangsu segment of Anqiu-Juxian Fault was probably not the surface rupture zone of the 1668 Tancheng M8 1/2 earthquake. In short, the Jiangsu segment of Anqiu-Juxian Fault has experienced many paleo-earthquake events since the late Pleistocene, with obvious activity during the Holocene. The seismic activities of the Jiangsu segment of Anqiu-Juxian Fault have the characteristics of large magnitude and low frequency. The Jiangsu segment of Anqiu-Juxian Fault has the deep tectonic and seismic-geological backgrounds of big earthquakes generation and should be highly valued by scientists.     

DISTRIBUTION OF 3 EARTHQUAKE RUPTURE ZONES IN ESATERN TIENSHAN AND ITS RELATIONSHIP WITH 2 HISTORICAL EARTHQUAKES

The distribution of earthquake rupture zone plays a very important role in determining location of epicenter and magnitude of historical earthquake. There is still argument about the seismogenic structure of the 1842 M7 Balikun earthquake and the 1914 M7 1/2 Balikun earthquake in the historical records in eastern Tienshan. Through field geological survey, we confirm that there exist 3 rupture zones in Eastern Tienshan. These rupture zones, Tazibulake rupture zone on the Jian Quanzi-Luo Baoquan Fault, north of Shanshan, Xiong Kuer rupture zone on the south Balikun Basin Fault and Yanchi rupture zone on the south Yiwu Basin Fault, are closely related to 2 historical earthquakes. Based on historical literature and current geological evidence analysis, we infer that Xiong Kuer rupture zone was produced by 1842 M7 earthquake and Yanchi rupture zone by 1914 M7 1/2 earthquake, while Tazibukale rupture zone may represent another unrecorded historical event. South Balikun Basin Fault disturbs Quaternary stratigraphy which has a ¹⁴C age of 3110±30 B.P in the south of Balikun County, ~100km to the east of Xiong Kuer rupture zone, therefore we can't preclude the possibility that Xiong Kuer rupture zone extends to the south of Balikun County. This region overlaps with the meizoseismal area based on the literature document, together with the fact that the impact of 1842 earthquake is no less than 1914 earthquake, we believe that the magnitude of 1842 earthquake is no less than that of the 1914 earthquake.     

RESEARCH ON ACTIVITIES OF THE GUDIAN FAULT IN SONGYUAN,JILIN PROVINCE

The Gudian Fault in the southwest of Songyuan is an important fault in the central depression of the Songliao Basin. It was recognized from the petroleum exploration data. Based on the data, we conducted shallow seismic exploration, drilling exploration, age determination(OSL) and topography measurement. The fault features and its motion characteristics are analyzed with the results of shallow seismic exploration. With stratigraphic correlation and optical stimulated luminescence dating, the latest active age of the fault is determined. The surface relief of the region to the southeast of the drilling site is relatively larger than surrounding places. An 800m long section across the fault was measured by GPSRTK, and the deformation amount across the zone was calculated. Four conclusions are drawn in this paper:(1) The Gudian Fault is arcuate in shape and shows a property of inverse fault with a length of about 66km in the reflection interface T1(bottom of the upper Cretaceous Nenjiang Group). (2) The middle part of the fault rupture is wider than the ends, narrowing or dying out outwards. According to this feature and the rupture of the bottom of the fourth segment of the upper Cretaceous Nenjiang Group, the fault can be divided into three segments, e.g. Daliba Village-Gaizijing-Guyang segment, Guyang-Shenjingzi-Julongshan Village segment and Julongshan Village-Caiyuanzi segment. (3) The yellow silt layer at the base of the upper Pleistocene series ((33.66±3.27) ka BP~50ka BP) is offset by the Gudian Fault, while the upper tawny silt layer is not influenced by the fault. Thus, the fault belongs to late Pleistocene active fault. (4) The amount of geomorphic deformation around Shenjingzi is 9m. The depth of the bottom of the upper Pleistocene series is 11m and the Huangshan Group of the mid Pleistocene series exposes to the southeast of the deformation zone. Therefore, the throw of the bottom of the upper Pleistocene series is about 20m at the sides of the deformation zone. In addition, the Qianguo M6(3/4) earthquake occurred in Songyuan area in 1119 AD. Though some studies have been done, arguments still exist on the seismogenic structure of the Qianguo M6(3/4) earthquake. Combined with others studies, Gudian Fault is considered as the seismogenic structure of the Qianguo M6(3/4) earthquake.     

TEXTUAL RESEARCH OF 1568 M7 GAOLING EARTHQUAKE IN SHAANXI AND ANALYSIS OF ITS SEISMOGENIC STRUCTURE

Study of historical earthquake is one of the important methods to understand the seismic activities and analyze the seismogenic faults. On the May 25^th, 1568 AD, a destructive earthquake occurred to the northeast of the present-day city of Xi'an, Shaanxi Province. Because this earthquake happened shortly after the 1556 M8 earthquake and was regarded as an aftershock, it has received little attention in previous studies. Previous earthquake catalogue agreed in assigning a magnitude 6 3/4 to this earthquake but had different epicentral locations and seismic intensity, and the seismogenic structure remains ambiguous. Based on textual research of historical earthquake and field investigation, the Jingyang County, Gaoling County, and Xianning County, were the worst hit area by the earthquake, and the areas, including Yongle Town, Gaozhuang Town at southeastern Jingyang County to Gaoling County and its southeastern present-day Jijia and Zhangbu, should be the mesoseismal area of this earthquake. The epicenter intensity of this earthquake is Ⅸ⁺(9~10 degrees), and the magnitude is estimated to be 7. The isoseismal lines were drawn to exhibit the various intensities of the areas damaged during the event, with its major axis directed NWW. Intensities reached Ⅸ⁺ in the zone extending west-northwest parallel to the Weinan-Jingyang Fault. This fault, characterized by a normal fault that developed during the Cenozoic extensional history of the Weihe Basin, dipping to the north at an angle of 60°~80°, is one part of the southern boundary faults in Weihe graben. There are geomorphological and geological evidences of recent activity of the fault during (180±30)a BP to (1 600±30)a BP. At T₁-T₂ fluvial terraces on the north bank of Weihe River, the scarps were faulted during Ming Dynasty, and sandy soil liquefaction, dense structural tensional fissures and faulted strata are noted in stratigraphic profiles and trenches. Thus, we suggest that this fault can reliably be regarded as being active during Holocene, and re-name the earthquake as the Shaanxi Gaoling earthquake.     

THE DISCUSSION FOR THE NEW ACTIVITY OF THE TIANQUAN SEGMENT OF LONGMENSHAN FAULT ZONE AND ITS RELATIONSHIP TO THE 1327 TIANQUAN EARTHQUAKE,SICHUAN

The 2008 Wenchuan earthquake occurred along the Longmen Shan fault zone, only five years later, another M7 Lushan earthquake struck the southern segment where its seismic risk has been highly focused by multiple geoscientists since this event. Through geological investigations and paleoseismic trenching, we suggest that the segment along the Shuangshi-Dachuan Fault at south of the seismogenic structure of the Lushan earthquake is active during Holocene. Along the fault, some discontinuous fault trough valleys developed and the fault dislocated the late Quaternary strata as the trench exposed. Based on analysis of historical records of earthquakes, we suggest that the epicenter of the 1327 Tianquan earthquake should be located near Tianquan and associated with the Shuangshi-Dachuan Fault. Furthermore, we compared the ranges of felt earthquakes(the 2013 M7 Lushan earthquake and the 1970 M_S6.2 Dayi earthquake)and suggest that the magnitude of the 1327 Tianquan earthquake is more possible between 6½ and 7. The southern segment of the Longmen Shan fault zone behaves as a thrust fault system consisting of several sub-paralleled faults and its deep structure shows multiple layers of decollement, which might disperse strain accumulation effectively and make the thrust system propagate forward into the foreland basin, creating a new decollement on a gypsum-salt bed. The soft bed is thick and does not facilitate to constrain fault deformation and accumulate strain, which produces a weak surface tectonic expression and seismic activity along the southern segment, this is quite different from that of the middle and northern segments of the Longmen Shan fault zone.     

INTERPRETATION AND ANALYSIS OF THE FINE FAULT GEO-METRY BASED ON HIGH-RESOLUTION DEM DATA DERIVED FROM UAV PHOTOGRAMMETRIC TECHNIQUE: A CASE STUDY OF TANGJIAPO SITE ON THE HAIYUAN FAULT

Fault-related tectonic geomorphologic features are integrated expressions of multiple strong seismological events and long-term surface processes, including crucial information about strong earthquake behavior of a fault. It's of great significance to identify the strong seismic activity information from faulted landscapes, which include the date and sequence of the seismic activities, displacements, active fault features, for studying the seismic rupture process, predicting the future seismic recurrence behavior and evaluating the seismic hazard of the fault. However, due to the restriction of measuring techniques and the subsequent poor quality of the acquired data, it has been difficult to accurately extract such information from complex tectonic landforms to study active faults for a long time. Recently, "small Unmanned Aerial Vehicle(sUAV)" photogrammetric technique based on "Structure from Motion(SfM)" provides a cost-efficient and convenient access to high-resolution and high-accuracy "digital elevation models(DEMs)" of tectonic landforms. This paper selects the Tangjiapo area at the Haiyuan Fault to conduct data collection, in which the structural and geomorphic features are well preserved. Using a small quadrotor unmanned aerial vehicle(Inpire 2), we collect 1598 aerial photographs with a coverage area of 0.72km². For calibrating the accuracy of the aerial data, we set 10 ground control points and use differential-GPS to obtain the spatial coordinates of these control points. We use model software Agisoft PhotoScan to process these digital pictures, obtaining high-resolution and high-accuracy DEM data with the geographic information, in which data resolution is 2.6cm/pix and the average density of point cloud is 89.3 point/m². The data with these accuracy and resolution can fully show the real geomorphic features of the landform and meet the requirements for extracting specific structural geomorphic information on the surface. Through the detailed interpretation of the tectonic landforms, we identify a series of structures associated with the strike-slip fault and divide the alluvial fan into four stages, named s₁, s₂, s₃, and s₄, respectively.Wherein, the s₁ is the latest phase of the alluvial fan, which is in the extension direction of the Haiyuan Fault and there isn't any surface fracture, indicating that the s₁ was formed after the M8.5 Haiyuan earthquake in 1920. The rupture zone on the s₂ fan is composed of varied kinds of faulting geomorphologic landforms, such as a series of en echelon tension-shear fractures trending 270°~285°, fault scarps and seismic ridges caused by the left-lateral motion of the seismic fault. In addition, a number of field ridges on the s₂ fan were faulted by the 1920 Haiyuan M8.5 earthquake, recording the co-seismic displacements of the latest earthquake event. Relatively speaking, the surface rupture structure of the s₃ fan is simple, mainly manifested as linear fault scarp with a trend of 270°~285°, which may indicate that multiple earthquakes have connected the different secondary fractures. And a small part of s₄ fan is distributed in the southwest of the study area without fault crossing. Furthermore, we measured the horizontal displacements of river channels and vertical offsets of fault scarps. The faulted ridge on the s₂ fan and faulted gully on the s₃ fan provide good linear markers for obtaining the fault left-lateral dislocation. We used the graphical dislocation measurement software LaDiCaoz developed based on Matlab to restore the gully position before the earthquake by comparing the gully morphology on both sides of the fault, and then determined the horizontal offset of s₂, which is(4.3±0.4)m and that of s₃ is(8.6±0.6)m. In addition, based on the DEM data, we extracted the fault scarp densely along the fault strike, and obtained the vertical offset of s₂, which is(4.3±0.4)m and that of s₃ is(1.79±0.16)m. Moreover, we detect slope breaks in the fault scarp morphology. For compound fault scarps generated by multiple surface rupture earthquakes, there are multiple inflection points on the slope of the topographic section, and each inflection point represents a surface rupture event. Therefore, the slope break point on the scarp becomes an important symbol of multiple rupture of the fault. The statistical result shows that the slope breaks number of s₂ is 1 and that of s₃ is 2. Based on the analysis of horizontal displacements of river channels and vertical offsets of fault scarps as well as its slope breaks, two surface rupturing events can be confirmed along the Tangjiapo area of the Haiyuan Fault. Among them, the horizontal and vertical displacements of the older event are(4.3±0.95)m and(0.85±0.22)m, respectively, while that of the latest event are(4.3±0.4)m and(0.95±0.14)m, which are the coseismic horizontal and vertical offsets of the 1920 Haiyuan earthquake. These recognitions have improved our cognitive level of the fine structure of seismic surface rupture and ability to recognize paleoearthquake events. Therefore, the high-resolution topographic data obtained from the SfM photogrammetry method can be used for interpretation of fine structure and quantitative analysis of microgeomorphology. With the development of research on tectonic geomorphology and active tectonics toward refinement and quantification, this method will be of higher use value and practical significance.     

PALEOEARTHQUAKES ALONG PUXIONG FAULT OF DALIANGSHAN FAULT ZONE DURING LATE QUATERNARY

Daliangshan fault zone (DFZ) constitutes an indispensable part of Xianshuihe-Xiaojiang fault system which is one of the main large continental strong earthquake faults in China.Puxiong Fault,the east branch of middle segment of DFZ,is the longest secondary fault.Its paleoseismic activity plays an important role in evaluating regional seismic activity level and building countermeasures of preventing and reducing the earthquake damage.The active fault mapping as well as the study of paleoseismological trench in recent years illustrates that Puxiong Fault is a slightly west-dipping high-angle left-lateral strike-slip fault with strong activity since late Pleistocene.Two trenches excavated across this fault reveal 2 and 3 paleoearthquakes that ruptured the fault at 8206 BC-1172 AD,1084-1549 AD,and 17434-7557 BC,1577-959 BC and 927-1360 AD,respectively.The OxCal model combining the results from both trenches and the another one in previous study across the fault with the historical earthquake record yields the elapsed time of~0.7ka of the latest paleoearthquake event,and the interval time is~2.3ka between the last two events.In the model,the penultimate event is considered to be recorded in all trenches.As all the three trenches are located at north part of the Puxiong Fault whose strike is apparently different from the south part,the~57km long north secondary segment is supposed to be the seismogenic structure of the paleoearthquake.According to the empirical scaling laws between magnitude and rupture length,the magnitude of the surface ruptured paleoearthquake is estimated to be more than M7 with the coseismic displacement~3.5m.However,the difference between the time of the paleoearthquake events on the middle and south segments of DFZ illustrates their independence as earthquake fracture units,and furthermore,the lower connectivity and the new generation of DFZ.     

北祁连山-河西走廊大震危险区预测

以青藏块体北部的北祁连山-河西走廊地震构造带为研究对象,在系统收集整理该区主干活动断裂新活动性特征、断裂滑动速率、历史地震及古地震资料的基础上,结合现今地震活动性,采用地震空区、空段识别方法和地震活动b值空间图像扫描方法,分析了研究区内历史地震及b值的分布特征.结果显示,该区的榆木山北缘断裂离逝时间较长,应力积累程度较...     

NEW EVIDENCES FOR LATE QUATERNARY ACTIVITY IN THE SOUTHERN SEGMENT OF THE YISHU-TANGTOU FAULT,THE TAN-LU FAULT ZONE,AND ITS TECTONIC IMPLICATION

The Tan-Lu Fault Zone(TLFZ), a well-known lithosphere fault zone in eastern China, is a boundary tectonic belt of the secondary block within the North China plate, and its seismic risk has always been a focus problem. Previous studies were primarily conducted on the eastern graben faults of the Yishu segment where there are historical earthquake records, but the faults in western graben have seldom been involved. So, there has been no agreement about the activity of the western graben fault from the previous studies. This paper focuses on the activity of the two buried faults in the western graben along the southern segment of Yishu through combination of shallow seismic reflection profile and composite drilling section exploration. Shallow seismic reflection profile reveals that the Tangwu-Gegou Fault(F₄)only affects the top surface of Suqian Formation, therefore, the fault may be an early Quaternary fault. The Yishui-Tangtou Fault(F₃)has displaced the upper Pleistocene series in the shallow seismic reflection profile, suggesting that the fault may be a late Pleistocene active fault. Drilling was implemented in Caiji Town and Lingcheng Town along the Yishui-Tangtou Fault(F₃)respectively, and the result shows that the latest activity time of Yishui-Tangtou Fault(F₃)is between(91.2±4.4)ka and(97.0±4.8)ka, therefore, the fault belongs to late Pleistocene active fault. Combined with the latest research on the activity of other faults along TLFZ, both faults in eastern and western graben were active during the late Pleistocene in the southern segment of the Yishu fault zone, however, only the fault in eastern graben was active in the Holocene. This phenomenon is the tectonic response to the subduction of the Pacific and Philippine Sea Plate and collision between India and Asian Plate. The two late Quaternary active faults in the Yishu segment of TLFZ are deep faults and present different forms on the surface and in near surface according to studies of deep seismic reflection profile, seismic wave function and seismic relocation. Considering the tectonic structure of the southern segment of Yishu fault zone, the relationship between deep and shallow structures, and the impact of 1668 Tancheng earthquake(M=8(1/2)), the seismogenic ability of moderate-strong earthquake along the Yishui-Tangtou Fault(F₃)can't be ignored.     

2020年云南东川ML4.2地震序列精定位研究

利用云南东川地区10个宽频带流动台站的连续波形数据,采用基于深度学习的自动震相拾取方法和震相关联技术,对2020年东川M_L4.2地震序列分别进行绝对定位和相对定位,获得了该地震序列的高精度地震定位结果,得到东川M_L4.2地震序列的212个余震事件,约为中国地震台网目录给出的余震数目的5倍,丰富了M_L≤3.0余震;精定位结果表明东川M_L4.2主震震源深度为5.19 km,余震震源深度集中在3~6 km,余震序列分布长轴呈NNE向展布;此次地震发生在小江断裂带西支,发震构造与乌龙拉分盆地的构造演化有关。     

根据烈度分布确定华北历史地震破裂区的经验准则及其应用

地震破裂区是地震时沿发震断裂带的同震错动面或破裂面在地表的垂直投影区域,指示了震源断层/破裂的位置与尺度。确定过去长期的强震/大地震破裂区是鉴别地震空区、研究与预测强震危险性的重要基础。对于现代强震,破裂区可运用多种现代技术方法确定,但对于历史强震,破裂区确定的方法需要探索与发展。以华北地区为例,研究利用烈度/等震线资料、结合地震构造与震区地表地质环境等信息确定历史强震破裂区的方法,并开展应用试验。结果表明:研究区现代地震破裂区延伸的烈度区间与极震区烈度、震区环境之间存在密切关系,基于这种关系建立了2条经验准则,可分别用于根据烈度分布确定华北2类震区环境(基岩区和厚层第四纪松散堆积覆盖区)历史强震破裂区的位置与延伸。文中还提出通过综合地震构造、现代小震/余震分布等信息,辅助确定历史强震破裂区横向宽度的思路与途径。作为应用试验,文中确定了5次历史地震的破裂区,结果表明本文发展的经验准则及相应方法适用于华北地区历史强震破裂区的确定。     

PALEOSEISMIC RECORDS OF LARGE EARTHQUAKES ON THE CROSS-BASIN FAULT IN THE SALT LAKE PULL-APART BASIN AND CASCADE RUPTURE EVENTS ON THE HAIYUAN FAULT

Cascade rupture events often occur along large strike-slip fault zone.The 1920 AD M 8¹/₂ earthquake ruptured all 3 segments of the Haiyuan Fault,and the Salt Lake pull-apart basin is the boundary between the west and middle segment of the fault.The data of trenching and drilling reveal 7 events occurring since last stage of late Pleistocene,and the two youngest events are associated with the historical records of 1092 AD (possibly) and 1920 AD respectively.These events are all large earthquakes with magnitude M>8,and the recurrence of them is characterized by earthquake clusters alternating with a single event.Now it is in the latest cluster which may last about 1000 years.Comparison of the paleoseismic sequence of this study and previous results reveals that the cross-basin fault in the Salt Lake pull-apart basin does not always rupture when cascade rupture events occur along the Haiyuan Fault,and likely ruptures only when the magnitude of the events is large (maybe M>8).Though there are many advantages in paleoseismic study in pull-apart basin,we should avoid getting the paleoseismic history of major strike-slip fault zones only depending on the rupture records of inner faults in pull-apart basins with large scale (maybe a width more than 3km).     

松原市扶余北隐伏活动断裂地震潜势研究

扶余肇东断裂带是松辽盆地中一条重要的隐伏发震断裂带,2006年和2014年在此断裂带上发生了多次近6级地震,地震活动主要集中在断裂的东北段和查干花段。在2012—2014年的松原市活断层探测工作中,探明扶余肇东断裂带东北段经过松原市区,该段呈近EW向,具有明显的分段性和独立性,将其命名为扶余北断裂。通过三维物探资料和浅层人工探测,确定了扶余北断裂的空间展布和剖面特征,并利用联排钻孔探测和光释光测年技术,确定该断裂存在晚更新世以来的活动;利用石油物探资料获得的基岩面破裂规模,对扶余北断裂的地震潜势进行了估计,并进行了概率性地震危险性研究。     

LATE-QUATERNARY ACTIVITY OF THE YALAHE FAULT OF THE XIANSHUIHE FAULT ZONE,EASTERN MARGIN OF THE TIBET PLATEAU

Complex geometrical structures on strike-slip faults would likely affect fault behavior such as strain accumulation and distribution, seismic rupture process, etc. The Xianshuihe Fault has been considered to be a Holocene active strike-slip fault with a high horizontal slip rate along the eastern margin of the Tibetan plateau. During the past 300 years, the Xianshuihe Fault produced 8 earthquakes with magnitude≥7 along the whole fault and showed strong activities of large earthquakes. Taking the Huiyuansi Basin as a structure boundary, the northwestern and southeastern segments of the Xianshuihe Fault show different characteristics. The northwestern segment, consisting of the Luhuo, Daofu and Qianning sections, shows a left-stepping en echelon pattern by simple fault strands. However, the southeastern segment(Huiyuansi-Kangding segment)has a complex structure and is divided into three sub-faults: the Yalahe, Selaha and Zheduotang Faults. To the south of Kangding County, the Moxi segment of the Xianshuihe Fault shows a simple structure. The previous studies suggest that the three sub-faults(the Yalahe, Selaha and Zheduotang Faults of the Huiyuansi-Kangding segment)unevenly distribute the strain of the northwestern segment of the Xianshuihe Fault. However, the disagreement of the new activity of the Yalahe Fault limits the understanding of the strain distribution model of the Huiyuansi-Kangding segment. Most scholars believed that the Yalahe Fault is a Holocene active fault. However, Zhang et al.(2017)used low-temperature thermochronology to study the cooling history of the Gongga rock mass, and suggested that the Yalahe Fault is now inactive and the latest activity of the Xianshuihe Fault has moved westward over the Selaha Fault. The Yalahe Fault is the only segment of the Xianshuihe Fault that lacks records of the strong historical earthquakes. Moreover, the Yalahe Fault is located in the alpine valley area, and the previous traffic conditions were very bad. Thus, the previous research on fault activity of the fault relied mainly on the interpretation of remote sensing, and the uncertainty was relatively large. Through remote sensing and field investigation, we found the geological and geomorphological evidence for Holocene activity of the Yalahe Fault. Moreover, we found a well-preserved seismic surface rupture zone with a length of about 10km near the Yariacuo and the co-seismic offsets of the earthquake are about 2.5~3.5m. In addition, we also advance the new active fault track of the Yalahe Fault to Yala Town near Kangding County. In Wangmu and Yala Town, we found the geological evidence for the latest fault activity that the Holocene alluvial fans were dislocated by the fault. These evidences suggest that the Yalahe Fault is a Holocene active fault, and has the seismogenic tectonic condition to produce a large earthquake, just like the Selaha and Zheduotang Faults. These also provide seismic geological evidence for the strain distribution model of the Kangding-Huiyuansi segment of the Xianshuihe Fault.     

2014年新疆于田7.3级地震发震构造和震前地震活动过程讨论

2014年2月12日在新疆于田发生7.3级地震,震中位于阿尔金断裂西段,这是继2008年3月21日于田7.3级地震后在塔里木盆地南侧发生的第2次7级地震。这次于田7.3级地震的余震主体沿NE向分布,余震区的西南段呈近SN向分布;绝大部分余震与前震在余震区西南密集分布,强余震(全部的5级以上地震和81%的4级地震)绝大多数都分布在这个区域,第1天的余震主要在这个区域呈近SN向分布,余震由西向东扩展。在这次于田地震的近SN方向上曾在1982、2011以及2012年先后发生过几次6级左右的地震,而这次地震填补了其中的空段。文中从区域构造环境、地震震源机制解和余震分布特征等方面,分析这次地震的发震过程,认为地震发生在硝尔库勒盆地南缘的分支断裂,受阿尔金断裂带构造应力影响,硝尔库勒盆地受到局部近EW向的拉张作用力,首先沿近SN向破裂,这个构造部位的解锁,促进阿尔金断裂左旋错动,产生NE向破裂,应力向东传递;文中还对有历史记录以来,阿尔金断裂上7级地震的发震构造及其对阿尔金断裂带的影响进行了讨论。     

LATE QUATERNARY ACTIVITY OF THE CENTRAL SEGMENT OF THE DARI FAULT AND RESTUDY OF THE SURFACE RUPTURE ZONE OF THE 1947 M73/4 DARI EARTHQUAKE,QINGHAI PROVINCE

Bayan Hara Block is one of the most representative active blocks resulting from the lateral extrusion of Tibet Plateau since the Cenozoic. Its southern and northern boundary faults are characterized by typical strike-slip shear deformation. Its eastern boundary is blocked by the Yangze block and its horizontal movement is transformed into the vertical movement of the Longmen Shan tectonic belt, leading to the uplift of the Longmen Shan Mountains and forming a grand geomorphic barrier on the eastern margin of the Tibet Plateau. A series of large earthquakes occurred along the boundary faults of the Bayan Hara Block in the past twenty years, which have attracted attention of many scholars. At present, the related studies of active tectonics on Bayan Hara Block are mainly concentrated on the boundary faults, such as Yushu-Ganzi-Xianshuihe Fault, East Kunlun Fault and Longmen Shan Fault. However, there are also some large faults inside the block, which not only have late Quaternary activity, but also have tectonic conditions to produce strong earthquake. These faults divide the Bayan Hara Block into some secondary blocks, and may play important roles in the kinematics and dynamics mechanism of the Bayan Hara Block, or even the eastern margin of the Tibet Plateau. The Dari Fault is one of the left-lateral strike-slip faults in the Bayan Hara Block. The Dari Fault starts at the eastern pass of the Kunlun Mountains, extends eastward through the south of Yalazela, Yeniugou and Keshoutan, the fault strike turns to NNE direction at Angcanggou, then turns to NE direction again at Moba town, Qinghai Province, and the fault ends near Nanmuda town, Sichuan Province, with a total length of more than 500km. The fault has been considered to be a late Quaternary active fault and the 1947 M73/4 Dari earthquake was produced by its middle segment. But studies on the late Quaternary activity of the Dari Fault are still weak. The previous research mainly focused on the investigation of the surface rupture and damages of the 1947 M73/4 Dari earthquake. However, there were different opinions about the scale of the M73/4 earthquake surface rupture zone. Dai Hua-guang(1983)thought that the surface rupture of the earthquake was about 150km long, but Qinghai Earthquake Agency(1984)believed that the length of surface rupture zone was only 58km. Based on interpretation of high-resolution images and field investigations, in this paper, we studied the late Quaternary activity of the Dari Fault and the surface rupture zone of the 1947 Dari earthquake. Late Quaternary activity in the central segment of the Dari Fault is particularly significant. A series of linear tectonic landforms, such as fault trough valley, fault scarps, fault springs and gully offsets, etc. are developed along the Dari Fault. And the surface rupture zone of the 1947 Dari earthquake is still relatively well preserved. We conducted a follow-up field investigation for the surface rupture zone of the 1947 Dari earthquake and found that the surface rupture related to the Dari earthquake starts at Longgen village in Moba town, and ends near the northwest of the Yilonggounao in Jianshe town, with a length of about 70km. The surface rupture is primarily characterized by scarps, compressional ridges, pull-apart basins, landslides, cleavage, and the coseismic offset is about 2~4m determined by a series of offset gullies. The surface rupture zone extends to the northwest of Yilonggounao and becomes ambiguous. It is mainly characterized by a series of linear fault springs along the surface rupture zone. Therefore, we suggest that the surface rupture zone of the 1947 Dari earthquake ends at the northwest of Yilonggounao. In summary, the central segment of the Dari Fault can be characterized by strong late Quaternary activity, and the surface rupture zone of the 1947 Dari earthquake is about 70km long.     

STUDY ON PALEOEARTHQUKES ALONG THE FODONGMIAO-HONGYAZI FAULT,GANSU PROVINCE

The Fodongmiao-Hongyazi Fault is a Holocene active thrust fault, belonging to the middle segment of northern Qilianshan overthrust fault zone, located in the northeastern edge of the Tibet plateau. The Hongyapu M7(1/4) earthquake in 1609 AD occurred on it. A few paleo-seismology studies were carried out on this fault zone. It was considered that four paleoearthquakes occurred on the Fodongmiao-Hongyazi Fault between(6.3±0.6) ka BP and(7.4±0.4) ka BP, in(4.3±0.3) ka BP, in(2.1±0.1) ka BP and in 1609 AD. The occurrences of the earthquakes suggested the quasi-periodic characteristic with a quasi-periodic recurrence interval between 1 600~2 500a(Institute of Geology, State Seismological Bureau, Lanzhou Institute of Seismology, State Seismological Bureau. 1993; Liu et al., 2014). There was no direct evidence for the Hongyapu M7(1/4) earthquake in 1609 AD from trench research in the previous studies. Great uncertainty exists because of the small number of the chronology data, as a few TL and OSL measurement data and several¹⁴ C data, and it was insufficient to deduce the exact recurrence interval for the paleoearthquakes. Five trenches were excavated and cleared up respectively in the eastern segment, middle segment and western segment along the Fodongmiao-Hongyazi Fault. After detail study on the trench profiles, the sedimentary characteristics, sequence relationship of the stratigraphical units, and fault-cuts in different stratigraphical units were revealed in these five trenches. Four paleoearthquakes in Holocene were distinguished from the five trenches, and geology evidences of the Hongyapu M7(1/4) earthquake in 1609 AD were also found. More accurate constraint of the occurring time of the paleo-earthquakes since Holocene on the Fodongmiao-Hongyazi Fault is provided by the progressive constraining method(Mao and Zhang, 1995), according to amounts of ¹⁴ C measurement data and OLS measurement data of the chronology samples from different stratigraphical units in the trenches. The first paleoevent, E4 occurred 10.6ka BP. The next event, E3 occurred about 7.1ka BP. The E2 occurred about 3.4ka BP. The last event, E1 is the Hongyapu M7(1/4) earthquake in 1609 AD. Abounds of proofs for the occurrences of the events of E1, E2 and E3 were found in the trench Tc1, trench Tc2, trench Tc4 and trench Tc3, located in the eastern, middle and western segments of the Fodongmiao-Hongyazi Fault accordingly. It's considered that the events E1, E2 and E3 may cause whole segment rupturing according to the proofs for these three events found together in individual trenches. The event E4 was only found in the trench Tc5 profile in the west of the Xiaoquan village in the eastern segment of the Fodongmiao-Hongyazi Fault. The earthquake rupture characteristics of this event can't be revealed before more detailed subsequent research. The time intervals among the four paleoearthquakes are ca 3.5ka, ca 3.7ka, and ca 3.0ka. The four events are characterized by ca 3.4ka quasi-periodic recurrence interval.     

甘孜-玉树断裂当江段地表破裂遗迹与1738年玉树西北地震的讨论

对历史记载的公元1738年玉树西北地震的震级及其发震构造目前仍存有争议。卫星影像解译和野外调查发现沿甘孜-玉树断裂当江段分布一条长约75km的左旋走滑地震地表破裂带,其最大同震水平位移约2.1m。综合分析该地表破裂带特征、探槽揭露信息、测年结果以及历史文献记载等资料,认为当江段应为1738年玉树西北地震的发震断层,基于震例类比和经验公式估算该次地震的震级为71/2级。沿甘孜-玉树断裂的历史地震破裂分布显示,玉树段在隆宝镇以西存在近50km长的破裂空段;当江段距1738年地震的离逝时间也可能已经接近其地震复发周期,上述两个段落未来均存在大震危险。