Traction rheological properties of simulative soil for deep-sea sediment

Journal of Oceanology and Limnology - The traction capacity of the mining machine is greatly influenced by the traction rheological properties of the deep-sea sediments. The best simulative soil...     

Numerical Modelling for Dynamic Instability Process of Submarine Soft Clay Slopes Under Seismic Loading

Marine geological disasters occurred frequently in the deep-water slope area of the northern South China Sea, especially submarine landslides, which caused serious damage to marine facilities. The cyclic elastoplastic model that can describe the cyclic stress-strain response characteristic for soft clay, is embedded into the coupled Eulerian-Lagrangian(CEL) algorithm of ABAQUS by means of subroutine interface technology. On the basis of CEL technique and undrained cyclic elastoplastic model, a method for analyzing the dynamic instability process of marine slopes under the action of earthquake load is developed. The rationality for cyclic elastoplastic constitutive model is validated by comparing its calculated results with those of von Mises model built in Abaqus. The dynamic instability process of slopes under different conditions are analyzed. The results indicate that the deformation accumulation of soft clay have a significant effect on the dynamic instability process of submarine slopes under earthquake loading. The cumulative deformation is taken into our model and this makes the calculated final deformation of the slope under earthquake load larger than the results of conventional numerical method. When different contact conditions are used for analysis, the smaller the friction coefficient is, the larger the deformation of slopes will be. A numerical analysis method that can both reflect the dynamic properties of soft clay and display the dynamic instability process of submarine landslide is proposed, which could visually predict the topographies of the previous and post failure for submarine slope.     

矿区地表沉降监测的一种组合模型预测方法

基于诱导有序加权平均（IOWA）算子,将差分整合移动平均自回归（ARIMA）模型和Holt-Winters指数平滑模型进行组合,采用SBAS-InSAR监测值进行矿区地表沉降预测,并与各单一模型的预测结果进行对比分析。结果表明,基于IOWA算子的组合模型的预测精度较单一模型有明显提升,其中各点均方误差（MSE）平均值为1.458 mm,平均绝对误差（MAE）为2.175 mm,可用于矿山地表沉降监测预测。     

Numerical simulation of mechanical compaction of deepwater shallow sediments

To study the compaction law and overpressure evolution in deepwater shallow sediments, a large-strain compaction model that considers material nonlinearity and moving boundary is formulated. The model considers the dependence of permeability and material properties on void ratio. The modified Cam-Clay model is selected as the constitutive relations of the sediments, and the deactivation/reactivation method is used to capture the moving top surface during the deposition process. A one-dimensional model is used to study the compaction law of the shallow sediments. Results show that the settlement of the shallow sediments is large under their own weight during compaction. The void ratio decreases strictly with burial depth and decreases more quickly near the seafloor than in the deeper layers. The generation of abnormal pressure in the shallow flow sands is closely related to the compaction law of shallow sediments. The two main factors that affect the generation of overpressure in the sands are deposition rate and permeability of overlying clay sediments. Overpressure increases with an increase in deposition rate and a decrease in the permeability of the overlying clay sediment. Moreover, an upper limit for the overpressure exists. A two-dimensional model is used to study the differential compaction of the shallow sediments. The pore pressure will still increase due to the inflow of the pore fluid from the neighboring clay sediment even though the deposition process is interrupted.     

Practical method and application study for predicting cyclic accumulative deformations of the saturated soft clay

The distribution of saturated soft clay is greatly wide in China. The current main measures adopted to deal with soft soil foundations may lead to environmental pollution, even some engineering accidents may happen on soft soil foundations. In order to solve engineering problems of saturated soft soil foundations well, researches of mechanical properties of them are necessary. One of the most important mechanical characteristics of saturated soft clay is its cyclic accumulative deformation under cyclic loadings. For saturated soft clay, the cyclic accumulative deformation is similar to the creep behavior under static loadings. Therefore, the cyclic accumulative deformation is equivalent to the creep, the number of loading cycles is seen as the time, and this study develops a practical method for predicting the cyclic accumulative deformation of saturated soft clay with the creep theory. The method is a pseudostatic elasto-plastic finite element method implemented by ABAQUS software. A fitted equation between cyclic accumulative strain and number of loading cycles and the empirical relationship of parameters of fitted equation were established with a series of cyclic triaxial compression tests. Then with this empirical relationship of parameters, the method developed by this study was employed to predict the cyclic accumulative deformation under cyclic triaxial tension tests. Predicted results were in good agreement with test results, and the effectiveness of this method was thus validated for different stress states. The method was then applied in analyzing the cyclic accumulative deformation for soft soil foundation of a pile-supported wharf structure.     

Accumulation and exploration of gas hydrate in deep-sea sediments of northern South China Sea

The large deep-sea area from the southwestern Qiongdongnan Basin to the eastern Dongsha Islands,within the continental margin of northern South China Sea,is a frontier of natural gas hydrate exploration in China.Multiform of deep-sea sedimentations have been occurred since late Miocene,and sediment waves as a potential quality reservoir of natural gas hydrate is an most important style of them.Based on abundant available data of seismic,gravity sampling and drilling core,we analyzed the characteristics of seismic reflection and sedimentation of sediment waves and the occurrence of natural gas hydrate hosted in it,and discussed the control factors on natural gas hydrate accumulation.The former findings revealed the deep sea of the northern South China Sea have superior geological conditions on natural gas hydrate accumulation.Therefore,it will be of great significance in deep-sea natural gas hydrate exploration with the study on the relationship between deep-sea sedimentation and natural gas hydrate accumulation.     

The effect of grain size on the viscosity and yield stress of fine-grained sediments

In debris flow modelling,the viscosity and yield stress of fine-grained sediments should be determined in order to better characterize sediment flow.In particular,it is important to understand the effect of grain size on the rheology of fine-grained sediments associated with yielding.When looking at the relationship between shear stress and shear rate before yielding,a high-viscosity zone（called pseudoNewtonian viscosity） towards the apparent yield stress exists.After yielding,plastic viscosity（called Bingham viscosity） governs the flow.To examine the effect of grain size on the rheological characteristics of fine-grained sediments,clay-rich materials（from the Adriatic Sea,Italy; Cambridge Fjord,Canada; and the Mediterranean Sea,Spain）,silt-rich debris flow materials（from La Valette,France） and silt-rich materials（iron tailings from Canada） were compared.Rheological characteristics were examined using a modified Bingham model.The materials examined,including the Canadian inorganic and sensitive clays,exhibit typical shear thinning behavior and strong thixotropy.In the relationships between the liquidity index and rheological values（viscosity and apparent yield stress）,the effect of grain size on viscosity and yield stress is significant at a given liquidity index.The viscosity and yield stress of debris flow materials are higher than those of low-activity clays at the same liquid state.However the viscosity and yield stress of the tailings,which are mainly composed of silt-sized particles,are slightly lower than those of low-activity clays.     

基于概率积分法的采动坡体稳定性预测与分析

地下采煤会引起地表沉降、变形,甚至引发山体、河堤滑坡等地质灾害。采动坡体的稳定性研究一直是采矿工程中实际关心的问题。该文首先介绍分析了概率积分法移动变形稳态、动态预测模型以及基于极限平衡理论的单滑面采动坡体稳定性预测模型,提出了使用概率积分法结合Knothe时间函数对采动坡体稳定性进行预测分析的方法,并使用C#及XML Schema语言编制了相关的计算程序。最后,结合一个工程实例对采动坡体稳定性和动态变化过程进行了预测与分析,通过实测数据验证了提出方法的可行性,得出了采动引起的坡体下沉是影响坡体稳定性的主要因素,并提出了在坡体拉伸阶段进行注浆加固的方法。     

Debris flows introduced in landslide deposits under rainfall conditions: The case of Wenjiagou gully

Debris flows often occur in landslide deposits during heavy rainstorms. Debris flows are initiated by surface water runoff and unsaturated seepage under rainfall conditions. A physical model based on an infinitely long, uniform and void-rich sediment layer was applied to analyze the triggering of debris-flow introduced in landslide deposits. To determine the initiation condition for rainfall-induced debris flows, we conducted a surface water runoff and saturated-unsaturated seepage numerical program to model rainfall infiltration and runoff on a slope. This program was combined with physical modeling and stability analysis to make certain the initiation condition for rainfall-introduced debris flows. Taking the landslide deposits at Wenjiagou gully as an example, the initiation conditions for debris flow were computed. The results show that increase height of surface-water runoff and the decrease of saturated sediment shear strength of are the main reasons for triggering debris-flows under heavy rainfall conditions. The debris-flow triggering is affected by the depth of surface-water runoff, the slope saturation and shear strength of the sediment.     

Unsaturated Creep Behaviors of Weak Intercalated Soils in Soft Rock of Badong Formation

The cutting slopes in soft rock of redbed appeared in Yichang-Badong highway often suffer from the instability along weak intercalations, so the creep behaviors of weak intercalated soils are crucially important for the stability of cutting slopes. Because the deformation of weak intercalated soils is significantly affected by water content due to the strong water sensitivity, it is necessary to study the influence of matric suction on the creep behaviors of weak intercalated soils. In order to find out the unsaturated creep characters of weak intercalated soils, a GDS unsaturated triaxial apparatus was used. Then the triaxial creep experiments on weak intercalated soil samples under varying matric suction were conducted to obtain the unsaturated creep curves. The results show that the weak intercalated soils have obvious creep behaviors, and the creep strain is in nonlinear relationship with stress and time. When the matric suction is constant, a larger deviator stress will lead to a larger creep strain; When the deviator stress is constant, a smaller matric suction will lead to a larger creep strain. Based on the Mesri creep model, an improved creep model for weak intercalated soils under varying matric suction was established, in which the relationship of stress-strain was expressed with a hyperbolic function, and the relationship of strain-time was expressed with power functions in stages. Then an unsaturated creep model including stress-matric suction-strain-time for weak intercalated soils was established based on the power function relationship between matric suction and Ed(a parameter of the improved creep model). The comparison of the calculated values of creep model and the experimental values shows that the creep behaviors of weak intercalated soils can be predicted by the unsaturated creep model by and large.     

Coastal Erosion Along the West Coast of the Taiwan Strait and It’s Influencing Factors

Based on the field surveys and repeated cross-profile observations combined with the comparison of many years’ topog-raphic maps,this study shows the spatial variability and varying patterns of coastal erosion along the west coast of the Taiwan Strait.Regional differentiation in the Meso-Cenozoic coastal tectonics determined the irregular coastline and geological background for large-scale coastal erosion distribution.The intensity of coastal erosion on the west side of the Taiwan Strait is mild in the nort...     

Two-dimensional numerical model for debris flows in the Jiangjia Gully, Yunnan Province

Debris flows are recurrent natural hazards in many mountainous regions.This paper presents a numerical study on the propagation of debris flows in natural erodible open channels,in which the bed erosion and sedimentation processes are important.Based on the Bingham fluid theory,a mathematical model of the two-dimensional non-constant debris flow is developed.The governing equations include the continuity and momentum conservation equations of debris flow,the sediment convection-diffusion equation,the bed erosion-deposition equation and the bed-sediment size gradation adjustment equation.The yield stress and shear stress components are included to describe the dynamic rheological properties.The upwind control-volume Finite Volume Method (FVM) is applied to discretize the convection terms.The improved SIMPLE algorithm with velocity-free-surface coupled correction is developed to solve the equations on non-orthogonal,quadrilateral grids.The model is applied to simulate a debris flow event in Jiangjia Gully,Yunnan Province and to predict the flow pattern and bed erosion-deposition processes.The results show the effectiveness of the proposed numercial model in debris flow simulation and potential hazard analysis.     

流变特性对青藏高原构造变形影响的数值模拟

建立三维黏弹性有限元模型,采用标准线性固体本构关系,分析流变特性对青藏高原现今构造变形的控制作用。模拟结果显示：1）在高原地壳介质流变机制的控制下,青藏高原内部从西向东,东向位移分量逐渐增大。最大值出现在甘孜 玉树 鲜水河断裂带区域内,反映了青藏高原的物质东移运动;2）在菱形块体中南部,其东侧区域向东南方向运动,而其西侧区域则转向西南方向运动;3）中地壳强流变模型与下地壳强流变模型给出的计算结果总体特征相似,二者均能较好模拟高原物质东流以及绕喜马拉雅东构造结的顺时针转动;4）流变特性对青藏高原构造变形特征的影响较大。     

New Damage-locating Method for Bridges Subjected to a Moving Load

A new damage-locating method for bridges subjected to a moving load is presented, and a new ‘moving load damage-locating indicator＇ （MLDI） is introduced. A vehicle is modeled as a moving load, the bridge is simplified as an Euler-Bernoulli beam, and the damage is simulated by a reduction of stiffness properties of the elements. The curvature and MLDI values at each node of the baseline model （undamaged） and the damage model are computed respectively. Then the damage or damages can be located from a sudden change of the MLDI value. The feasibility and effectiveness of the proposed method are validated by numerical simulation. The results indicate that the method is effective, being able to not only locate a single damage accurately, but also locate multiple damages in simply-supported bridges, including multiple damages in continuous bridges. The results also indicate that the MLDI can accurately locate damages under 5% measurement noise.     

Mechanisms involved in triggering debris flows within a cohesive gravel soil mass on a slope: a case in SW China

The triggering mechanisms of debris flows were explored in the field using artificial rainfall experiments in two gullies, Dawazi Gully and Aizi Gully, in Yunnan and Sichuan Provinces, China, respectively. The soils at both sites are bare, loose and cohesive gravel-dominated. The results of a direct shear test, rheological test and back-analysis using soil mass stability calculations indicate that the mechanisms responsible for triggering debris flows involved the decreases in static and dynamic resistance of the soil. The triggering processes can be divided into 7 stages: rainfall infiltration, generation of excess runoff, high pore water pressure, surface erosion, soil creep, soil slipping, debris flow triggering and debris flow increment. In addition, two critical steps are evident: (i) During the process of the soil mass changing from a static to a mobile state, its cohesion decreased sharply (e.g., the cohesion of the soil mass in Dawazi Gully decreased from 0.520 to 0.090 kPa, a decrease of 83%). This would have reduced the soil strength and the kinetic energy during slipping, eventually triggered the debris flow. (ii) When the soil mass began to slip, the velocity and the volume increment of the debris flow fluctuated as a result of the interaction of soil resistance and the sliding force. The displaced soil mass from the source area of the slope resulted in the deposition of a volume of soil more than 7 - 8 times greater than that in the source area.     

MDA在农业GIS应用系统构建中的应用研究

随着GIS在农业领域应用的不断深入,农业GIS应用系统的开发也朝着具体、复杂和专业化方向发展.针对目前农业GIS应用系统开发中存在的概念模型、数据模型、元数据标准不统一、数据库整合性差等不足,本文通过分析MDA架构体系及开发流程,结合软件复用思想和MDA方法,提出一种基于MDA的农业GIS应用系统开发构建方式,阐述了空...     

钻井液用高分子聚合物高温流变特性影响因素探究

聚合物对钻井液的高温流变特性具有重要影响。对比了聚合物种类、加量、剪切时间、盐、造浆黏土等对聚合物溶液高温流变性的影响，并对不同温度下的剪切速率-剪切应力关系进行了流变模型拟合。结果表明，温度升高、剪切时间及盐量增加均导致黏度降低，超过190℃后黏度下降速率加剧；含5%甲酸盐与5%卤盐的样品黏度在降温阶段的黏度恢复率分别为86.8%和2.7%；以宾汉模式对造浆黏土与聚合物混合液进行拟合，220℃时的动切力最高达到5.47 Pa。温度升高使得聚合物溶液由假塑性向牛顿性演变的趋势增强。高于130℃时，长时间剪切导致黏度下降的趋势明显，此时含甲酸盐的聚合物溶液黏度较含卤盐的高，且降温阶段的黏度恢复率也较高。黏土的存在增强了混合液的网间结构，有利于高温下携带岩屑。      

地形坡度对越野机动时间影响分析

为研究地形坡度对车辆越野机动时间的影响,预测和估计车辆通行时间,采用了数字高程模型(Digital Elevation Model,DEM)来模拟复杂的地貌形态。采用了移动窗口法计算了DEM格网单元的坡度,建立数学模型研究了地貌对车辆越野机动的速度影响系数,包括两方面:坡度引起路线延长和坡度影响车辆自身速度。通过实例分析计算了车辆通行时间,该方法为准确研究车辆越野机动通行时间提供了理论依据和参考。     

A method for simulating sediment incipient motion varying with time and space in an ocean model(FVCOM):development and validation

We modified the sediment incipient motion in a numerical model and evaluated the impact of this modification using a study case of the coastal area around Weihai, China. The modified and unmodified versions of the model were validated by comparing simulated and observed data of currents, waves, and suspended sediment concentrations(SSC) measured from July 25~(th) to July 26~(th), 2006. A fitted Shields diagram was introduced into the sediment model so that the critical erosional shear stress could vary with time. Thus, the simulated SSC patterns were improved to more closely reflect the observed values, so that the relative error of the variation range decreased by up to 34.5% and the relative error of simulated temporally averaged SSC decreased by up to 36%. In the modified model, the critical shear stress values of the simulated silt with a diameter of 0.035 mm and mud with a diameter of 0.004 mm varied from 0.05 to 0.13 N/m~2, and from 0.05 to 0.14 N/m~2, respectively, instead of remaining constant in the unmodified model. Besides, a method of applying spatially varying fractions of the mixed grain size sediment improved the simulated SSC distribution to fit better to the remote sensing map and reproduced the zonal area with high SSC between Heini Bay and the erosion groove in the modified model. The Relative Mean Absolute Error was reduced by between 6% and 79%, depending on the regional attributes when we used the modified method to simulate incipient sediment motion. But the modification achieved the higher accuracy in this study at a cost of computation speed decreasing by 1.52%.     

Shear Wave Speed Dispersion Characteristics of Seafloor Sediments in the Northern South China Sea

To accurately characterize the shear wave speed dispersion of seafloor sediments in the northern South China Sea,five types of sediments including silty clay,clayey silt,sandy silt,silty sand,and clayey sand were selected,on which the measurements of the shear wave speed at 0.5-2.0 kHz and related physical properties were performed.Results reveal that the shear wave speed of sediments increases as the frequency increases,and the dispersion enhanced in the sediments in the order of silty clay,clayey silt,sandy silt,silty sand,and clayey sand,at a linear change rate of 0.727,0.787,3.32,4.893,and 6.967 m s?1 kHz?1,respectively.Through regression analysis,linear and logarithmic regression equations for the correlation between shear wave speed and frequency were established for each sediment type and the determination coefficients of regression equations indicate that the correlation is closer to a logarithmic relationship.The Grain-Shearing(GS)and Biot-Stoll models were used to calculate the shear wave speed dispersion of the five sediment types,and the comparison between theoretical prediction and measured results of shear wave speeds shows that the GS model can more accurately describe the shear wave speed dispersion characteristics of these sediments in the frequency band of 0.5-2.0 kHz.In the same band,the predictions obtained by using the Biot-Stoll model are significantly different from the measured data.