Flow-type landslides in pyroclastic soils on flysch bedrock in southern Italy: the Bosco de’ Preti case study

In the last 20 years, major efforts have been made to investigate shallow flow-type landslides. Such phenomena are usually rainfall-induced and in the geological context of Campania (Southern Italy) occur in pyroclastic soils resting on steep slopes mainly constituted by carbonate or volcanic bedrock and by flysch deposits. They are generally complex landslides with an early soil slide and a subsequent flow evolution. In this paper, a database of flowslides occurring in recent years within the flysch deposits of Avellino (Campanian Apennines) is first discussed and then the case study of Bosco de’ Preti landslide on March 4, 2005, is described. The geological and geotechnical characteristics of the soils involved are described and the monitoring of the groundwater heads collected over 1 year from June 2005 to June 2006 is also shown. The last part of the paper illustrates the results of numerical modelling of the landslide triggering to gain insights into such phenomena. Slope stability analyses are preceded by hydrological modelling of the slope based on the monitoring data. Numerical analysis demonstrated that the rainfall during the 2 months preceding the event was able to fully saturate the pyroclastic cover and to establish positive pore water pressure at the depth of the surface of rupture, a soil condition never witnessed in carbonatic contexts. Hence, a combination of antecedent (predisposing factors) and single rainfall events (triggering factors) led to slope failure, as usually happens in pyroclastic soils in carbonatic and volcanic contexts. Finally, analysis of the historical landslides together with detailed investigation of the Bosco de’ Preti case study permitted comparison between flow-type landslides in pyroclastic soils on carbonatic/volcanic bedrock and those on flysch.     

Failure Mechanism of a Shallow Landslide at Tun-Sardon Road Cut Section of Penang Island,Malaysia

The occurrences of shallow landslides in residual soils of Penang hilly areas are common in rainy days. The failure mechanisms of a shallow landslide occurred at km 3.9 road in Tun-Sardon area of Penang Island have been simulated using two different methods of slope stability analysis. The results indicate that the failure was initiated locally inside the slope and then propagated further to induce total failure. The failure propagation was started from initial local failure zone and was driven by mobilized shear strength along the shear plane. The slope was marginally stable with an overall factor of safety of 1.32 before it failed to a rainfall event on September 6, 2008. It is found from back calculation that the rain infiltration raised the temporary water level and reduced the shearing strength of soil to a minimum level with increased pore water pressure to trigger the failure. This paper suggests further research on shallow landslide of Penang Island considering the direct rainfall infiltration effect in terms of groundwater pressure-head distribution inside the slope.     

Rapid terrain-based mapping of some volcaniclastic flow hazard using Gis-based automated methods: a case study from southern Campania,Italy

Destructive volcaniclastic flows are among the most recurrent and dangerous natural phenomena in volcanic areas. They can originate not only during or shortly after an eruption (syn-eruptive) but also during a period of volcanic quiescence (inter-eruptive), when heavy and/or persistent rains remobilize loose pyroclastic deposits. The area in Italy most prone to such flows is that of the Apennine Mountains bordering the southern Campania Plain. These steep slopes are covered by pyroclastic material of variable thickness (a few cm to several m) derived from the explosive activity of the Somma-Vesuvius and Campi Flegrei volcanoes a few tens of kilometers to the west. The largest and most recent devastating event occurred on May 5, 1998, causing the death of more than 150 people and considerable damage to villages at the foot of the Apennine Mountains. This tragic event was only the most recent of a number of volcaniclastic flows affecting the area in both historical and prehistoric times. Historical accounts report that more than 500 events have occurred in the last five centuries and that more than half of these occurred in the last 100 years, causing hundreds of deaths. In order to improve volcaniclastic flow hazard zonation and risk mitigation in the study area, we produced a zonation map that identifies the drainage basins potentially prone to disruption. This map was obtained by combining morphological characteristics (concavity and basin shape factor) and the mean slope distribution of drainage basins derived from a digital elevation model with a 10-m resolution. These parameters allowed for the classification of 1,069 drainage basins, which have been grouped into four different classes of proneness to disruption: low, moderate, high and very high. The map compiled in a GIS environment, as well as the linked database, can be rapidly queried.     

Zoning for flowslide and debris flow in pyroclastic soils of Campania Region based on “infinite slope” analysis

Campania Region (Italy), one of the most densely populated areas in Europe, is probably the one with the highest risk of landslide. A large part of the region is covered by unsaturated cohesionless pyroclastic deposits subjected to rainfall-induced landslides. According to experience, these can display different features and magnitude. The most catastrophic landslides are liquefied debris flows which periodically occur on steep slopes, causing death and destruction in areas located downslope. Therefore, zoning of those areas which can be the source of liquefied debris flow is necessary. The paper reports some useful elements for zoning based on infinite slope analysis, accounting for the results of recent research on the mechanics of rainfall-induced landslides in pyroclastic soils.     

Failure processes in a full-scale landslide experiment using a rainfall simulator

A full-scale landslide experiment was conducted to clarify the failure process of a landslide triggered by rainfall, using a loose sandy soil. The experiment used a 23-m long and about 8-m high flume, consisting of three parts: an upper 30° slope section, a lower 10° slope section, and a horizontal section at the foot of the slope. The flume was sprinkled at a constant intensity of 100 mm/h. The landslide occurred first in the upper slope about 154 min after the sprinkling started, following a creep movement within 41 min. The sliding mass slid to a stop in about 5 s, compressing soils in the lower gentle slope and horizontal sections. The dynamic process related to slide movement and the fluctuation of subsurface water pressures during failure were measured and analyzed. Sequential visual observations provided a clear record of the slip surface during failure. The rapid increase of subsurface water pressure in the slope and horizontal soil layers was also recorded during failure. It was inferred that the increased water pressures in the upper slope resulted from collapse of loose soil structure during shearing in the translational slide, whereas those in the lower portion of the slope and horizontal sections resulted from a mix of soil compression and shearing by the sliding mass.     

Downslope volume enlargement of a debris slide–debris flow in the 1999 Hiroshima, Japan, rainstorm

Following a heavy rainstorm on 29 June 1999, hundreds of slope failures occurred in granitic mountains in Hiroshima Prefecture, Japan. Among these events, a highly mobile landslide (termed the Kameyama landslide in this paper), which occurred in Kameyama area of Hiroshima city, was the most catastrophic, and was investigated in detail. The displaced soil mass from the source area of this landslide traveled about 300 m and deposited a volume more than 10 times as great as that in the source area. The landslide originated in and traversed a valley-shaped concave slope covered by pre-existing colluvial debris deposits. In addition, a spring was visible in the source area and very shallow ground water was observed in an observation pit dug in the source area. Thus, it is inferred that the ground-water table rose quickly during the rainfall, and that this rise triggered the slope failure in the source area. Based on a field survey along the landslide cross section, a possible explanation for the mechanism of the landslide was obtained: the displaced soil mass from the source area impacted the debris deposit in the path of the landslide, thus triggering liquefaction failure of the saturated part of debris. The original landslide and the liquefied debris then moved downslope as a single mass. To examine this assumption, ring-shear tests were performed on samples taken from the source area. Undrained ring-shear tests on the saturated samples showed that the sample is highly liquefiable, and liquefaction failure could have been triggered in the debris deposits by a very small impact from the displaced soil mass of the initial failure. In addition, laboratory tests simulating the impacts on the debris deposits at natural water content, i.e., unsaturated (at the survey time, 2 days after the failure) showed that although shear failure could be caused by the assumed impact force, the displaced soils stopped after a few centimeters displacement, indicating that existence of a saturated zone in debris deposits is prerequisite for this kind of failure.     

The environmental impact of landslides on the population living on the eastern footslopes of the Aberdare ranges in Kenya: a case study of Maringa Village landslide

 Landslides are a recognized but poorly studied phenomena in the eastern footslopes of the Aberdare ranges in central Kenya. The Aberdare ranges traverse the Murang'a, Kiambu, Nyeri and Nyandarua districts of Kenya where fatal landslides have occurred in the past. A detailed study of a major landslide which occurred at Maringa village in Murang'a district on 30 April 1997, has been undertaken. The landslide buried three houses at the toe of a slope and killed all the 11 occupants in their sleep. It is shown that the geology and climate of the study area contribute to the prevalence of landslides not only in Murang'a but in all the andosol-covered areas throughout the eastern footslopes of Aberdare ranges. Rapid weathering of pyroclastic rocks in a warm and wet climate create a regolith which is generally weaker than the underlying better-cemented basalt and basaltic agglomerates. The landsliding occurred when the weathered pyroclastic regolith become saturated after a heavy rainstorm on high mechanically unstable slope which slid over the more stable basalts. Over-saturation of clay soils (andosol) which were also derived from weathering of pyroclastic rocks contributed to the slope failure. The results of the study show that besides fatalities and injuries, the landslide destroyed homes, plantations and roads. Received: 16 March 1998 · Accepted: 22 September 1998     

Lanslide hydrogeological susceptibility of Maierato (Vibo Valentia, Southern Italy)

A large landslide occurred at Maierato (Vibo Valencia District), Southern Italy, on 15 February 2010, when rapid failure was produced after several days of preliminary movements. The landslide can be classified as a rotational slide with flowing of the mass. It occurred within a larger deep-seated gravitational movement area and was preconditioned for failure by the intrinsic geological weakness of the area. Actually, the in situ survey showed the presence of several ancient movement surfaces all around the urban area. The landslide-triggering factor was the increase in the groundwater flow, consequent to a period of heavy and prolonged rainfall. The aim of the paper is to explain the mechanism of occurrence of the February 2010 composite landslide, in order to assess the landslide hydrogeological susceptibility in the whole urban area of Maierato. For this reason, the present paper deals with: (1) identification of the landslide mechanism and triggering factors (2) slope stability back-analysis using a finite-difference-based shear strength reduction method, and (3) 3D groundwater flow modelling extended to the whole urban area both in pre- and post-failure conditions. The results show that the February 2010 composite landslide was triggered by a water table increase of about 15 m uphill the landslide scarp. This hydrogeological condition could be reached after the period of heavy and prolonged rainfall preceding the landslide event. Finally, based on the groundwater modelling in post-failure condition, a landslide hydrogeological susceptibility map was drawn for the all urban area of Maierato, showing the presence of extended areas exposed to hazard.     

Hydrologic conditions responsible for triggering the Sto e landslide, Slovenia

In two events, on November 15 and 17, 2000, near the Mangart Mountain (2679 m a.s.l.), NW Slovenia, two translational landslides (debris flow slides) with a total volume of more than 1.5 million m³ occurred on the Sto e slope composed of morainic material filled with silt fraction. The first landslide was associated with a dry and the second landslide with a wet debris-flow, respectively. The rain gauging station in the village of Log pod Mangartom recorded 1638.4 mm of rainfall (more than 60% of the average annual precipitation) in the 48 days before the events (rainfall intensity of 1.42 mm/h in 1152 h). The recorded rainfall depth has a recurrence interval of more than 100 years. Other recorded rainfall depths of shorter duration (481.6 mm in 7 days, 174.0 mm in 24 h, 70 mm in 1 h) have recurrence intervals of much less than 100 years. A hydrological analysis of the event showed that the increase in runoff coefficients during the wet period in autumn 2000 before the landslide was as high as two- to threefold. An analysis using natural isotopes of δ¹⁸O and tritium of water samples from the Sto e landslide area has shown permanent but slow exfiltration of underground waters from a reservoir in the slope. In the case of low-intensity and long-duration rainfall in autumn 2000, relatively low permeable (10⁻⁷ m/s) morainic material was nearly saturated but remained stable (average porosity 21%, water content 20%, liquid limit 25%) until high artesian pressures up to 100 m developed in the slope by slow exfiltration from the relatively high permeable (10⁻⁵ m/s) massive dolomite. The Sto e landslide (two debris flow slides) was triggered by high artesian pressures built in the slope after long-duration rainfall. The devastating debris-flows formed from the landslide masses by infiltration of rainfall and surface runoff into the landslide masses and by their liquefaction.     

A study of the correlation between electrical resistivity and matric suction for unsaturated ash-fall pyroclastic soils in the Campania region (southern Italy)

In the territory of the Campania region (southern Italy), critical rainfall events periodically trigger dangerous fast slope movements involving ashy and pyroclastic soils originated by the explosive phases of the Mt. Somma-Vesuvius volcano and deposited along the surrounding mountain ranges. In this paper, an integration of engineering-geological and geophysical measurements is presented to characterize unsaturated pyroclastic samples collected in a test area on the Sarno Mountains (Salerno and Avellino provinces, Campania region). The laboratory analyses were aimed at defining both soil water retention and electrical resistivity curves versus water content. From the matching of the experimental data, a direct relationship between electrical resistivity and matric suction is retrieved for the investigated soil horizons typical of an ash-fall pyroclastic succession. The obtained relation turns out to be helpful in characterizing soils up to close saturation, which is a critical condition for the trigger of slope failure. In such a regime, the water content and the matric suction have small variations, while electrical resistivity variations can be appreciated in a larger range of values. For this reason, besides suction measurements on very small soil volumes through classical tensiometers, our analyses suggest the direct monitoring of in situ electrical resistivity values as an effective tool to recognise the hydrological state of larger and more representative soil volumes and to improve early warning of dangerous slope movements.     

Geotechnical characterisation of pyroclastic soils involved in huge flowslides

Landslides of the flow type involving granular geo-materials frequently result in casualties and damage to property because of the long travel distance and the high velocities that these may attain. This was true for the events that took place in Campania Region (Southern Italy) in May 1998, involving pyroclastic soils originating from explosive activities of the Somma-Vesuvius volcano. Although these phenomena have frequently affected various areas of the Campania region over the last few centuries, there were no useful geological and geotechnical references available in the aftermath of the May 1998 events. For this reason Salerno University, which was involved in the scientific management of the emergency, addressed the issue of acquiring data on the geological, geomorphological and hydrogeological features of the slopes where the landslides had taken place. The information acquired made it possible to set up a slope evolution model that is able to interpret, from a geological point of view, past and more recent landslides that had occurred in the same area. As preliminary geotechnical analyses had already validated the above model, more detailed investigations were performed both on the pore pressure regimen of the covers still in place as well as on the physical and mechanical properties of pyroclastic soils, in saturated and unsaturated conditions. The present paper begins by discussing the data acquired during the .rst phase of the studies and then goes on to illustrate the laboratory results so far obtained with the aid of approximate procedures. These help advance our knowledge of pyroclastic soils within a reasonable time frame, thus improving landslide triggering analysis.     

Application of a GIS-aided method for the assessment of volcaniclastic soil sliding susceptibility to sample areas of Campania (Southern Italy)

A significant part of Campania is extensively covered by volcaniclastic soils, deriving from the alteration of airfall-sedimented formations of layered ashes and pumices that were ejected by Campi Flegrei and Mt. Somma–Vesuvius during explosive eruptions. Where such soils cover steep slopes cut in carbonate bedrock, landforms depend essentially on the morpho-evolution of such slopes prior to the deposition of the volcaniclastic soils, because these are generally present only as thin veneers, up to a few meters of total thickness. Historical records and local literature testify that, in this part of Campania, landslides that originate on carbonate slopes covered by such soils and terminate at their foot or at gully outlets are frequent, following critical rainfall events. Such landslides can be classified as complex, occurring initially as debris slides, but rapidly evolving into debris avalanches and/or debris flows. The localization of the initial sliding areas (i.e. “sources”) on the slopes depends on both the spatial distribution of characters of the soil cover and the spatial distribution of the triggering rainfall events. It therefore appears reasonable to separate the two aspects of the problem and focus on the former one, in order to attempt an assessment of soil sliding susceptibility in the event of landslide-triggering rainfall. In this paper, some results of the application of a method aimed at such an assessment are presented. The method, called SLIDE (from SLiding Initiation areas DEtection), is based on the concept that, for a spatially homogeneous soil cover and a spatially homogeneous landslide-triggering rainfall sequence, different values of threshold slope gradient for limit equilibrium conditions exist, depending on morphological characters of the soil cover, such as its continuity and planform curvature. The method is based on the assessment of (1) soil cover presence, (2) discontinuities within soil cover, (3) slope gradients and curvature, by means of good resolution DEMs. It has been applied to sample carbonate slopes of Campania, where landslides originated either repeatedly or recently. Results are encouraging, and a soil sliding susceptibility map of a large area, based on a simplified version of method, is also presented.     

Landslides triggered by the 23 November 2000 rainfall event in the Imperia Province, Western Liguria, Italy

From mid-October to 22 November 2000, the western Liguria Region of Italy experienced prolonged and intense rainfall, with cumulative values exceeding 1000 mm in 45 days. The severe rainfall sequence ended on November 23 with a high-intensity storm that dumped more than 180 mm of rain in 24 h. The high-intensity event caused flooding and triggered more than 1000 soils slips and debris flows and a few large, complex landslides. Slope failures caused three fatalities and severe damage to roads, private homes, and agriculture. Large (1:13,000) and very large (1:5000) scale colour aerial photographs were taken 45 days after the event over the areas most affected by the landslides. Through the interpretation of the 334 photographs covering an area of 500 km², we prepared a landslide inventory map that shows 1204 landslides, for a total landslide area of 1.6 km². We identified the rainfall conditions that triggered landslides in the Armea valley using cumulative- and continuous-rainfall data, combined with detailed information on the time of landslide occurrence. Landslide activity initiated 8 to 10 h after the beginning of the storm, and the most abundant activity occurred in response to rainfall intensities of 8 to 10 mm per hour. For the Ceriana Municipality, an area where the landslides were numerous in November 2000, we also collected information about a historical event that occurred on 8–11 December 1910 and triggered abundant landslides resulting in severe economic damage. A comparison of the damage caused by the historical and the recent landslide events indicated that damage caused by the 1910 historical event was more diffused but less costly than the damage caused by the 2000 event.     

Structural and engineering geology of the East Gate Landslide, Purcell Mountains, British Columbia, Canada

The East Gate Landslide is a prehistoric landslide that was reactivated in January 1997. The slope failure took place in the lower greenschist metasedimentary units of the Precambrian Horsethief Creek Group. The Grizzly Creek Thrust is a regional overturned fault that coincides with the location of the headscarp of the East Gate Landslide. Four discontinuity sets were recognised from detailed engineering geological mapping of the headscarp and surrounding area. The main scarp of the section reactivated in 1997 was sub-divided into three structural domains based on its position within the landslide, lithology, and orientation of the discontinuity sets. Limit-equilibrium techniques, finite-difference (FLAC) and distinct-element (UDEC) codes were used to investigate the failure mechanism of the 1997 event. The results of the field observations and numerical models suggest that the 1997 failure involved a complex mechanism incorporating components of rock-slumping, bi-planar, and pseudo-circular failure that was controlled by both the orientation of the discontinuity sets and reduced rock-mass quality due to tectonic deformation.     

A large-scale obliquely inclined bedding rockslide triggered by heavy rainstorm on the 8th of July 2020 in Shiban Village,Guizhou, China

A large-scale obliquely inclined bedding rockslide, activated by a heavy rainstorm, occurred on July 8, 2020, at 7:05 (UTC?+?8) in Shiban Village, Songtao Miao Autonomous County, Guizhou Province, China. The loss of life in this event was greatly reduced owing to the local warning system for rainstorm-induced geohazards. To understand the failure characteristics, triggering factors, the genetic mechanism of the landslide, the geomorphological features, geological characteristics, hydrological conditions, and rainfall characteristics were systematically studied by a synthetic approach including field investigations, satellite imagery, unmanned aerial vehicle (UAV) photography, laboratory tests, and rainfall data statistics. The results indicated that the interface between the soft and hard rock, the well-developed joints, and the free face in front of the slope constituted the boundaries of this landslide. The concave topography at the back and southern edge of the landslide, the bare ground, and the cataclastic structure of the rock mass provided favorable conditions for the collection or infiltration of rainwater. The concentrated rainstorm was the direct trigger for the landslide, which led to a rapid inflow and retention of rainfall in the landslide through favorable landform and geological conditions. The groundwater recharge that cannot be drained in time caused the mechanical deterioration of rock mass and induced a rapid increase in pore water pressure in the landslide. Moreover, the water level of the Ganlong River at the toe of the slope also rose rapidly, and the uplift pressure in front of the slope increased accordingly. Under the combined action of these adverse factors, the overall anti-sliding force of the slope was less than the sliding force, finally resulting in the landslide. Remarkably, the local warning system for rainstorm-induced geohazards successfully forecasted the landslide, but the shortcoming is that the forecast time in advance is short. Nevertheless, the prediction has significantly reduced human casualties and provided valuable experience for the prediction of this type of landslide.

     

Suggestion of a method for landslide early warning using the change in the volumetric water content gradient due to rainfall infiltration

An early warning system can be an effective measure to reduce the damage caused by landslides by facilitating the timely evacuation of residents from a landslide-prone area. Early detection of landslide triggering across a broad range of natural terrain types can be accomplished by monitoring rainfall and the physical property changes of soils in real time or near-real time. This study involved the installation of a real-time monitoring system to observe physical property changes in soils in a valley during rainfall events. This monitoring included the measurement of volumetric water content, which was compared with the results of laboratory flume tests to identify landslide indicators in the soils. The response of volumetric water content to rainfall events is more immediate than that of pore-water pressure, and volumetric water content retains its maximum value for some time before slope failure. Therefore, an alternative method for landslide monitoring can be based on the observation of volumetric water content and its changes over time at shallow soil depths. Although no landslide occurred, the field monitoring results showed a directly proportional relationship between the effective cumulative rainfall and the gradient of volumetric water content per unit time (t/t _max). This preliminary study thus related slope failure to the volumetric water content gradient as a function of rainfall. Laboratory results showed that a high amount of rainfall and a high gradient of volumetric water content could induce slope failure. Based on these results, it is possible to suggest a threshold value of the volumetric water content gradient demarcating the conditions for slope stability and slope failure. This threshold can thus serve as the basis of an early warning system for landslides considering both rainfall and soil properties.     

Tumbi Landslide, Papua New Guinea: rainfall induced?

On 24 January 2012, a fatal landslide with an estimated volume of 3 Mm³ hit villagers and infrastructure in the Tagali Valley, Southern Highlands Province, Papua New Guinea (PNG). Although a moderate event by PNG standards, the associated human casualties and infrastructure destruction give a human as well as a scientific need to review the potential causes for the event. PNG experiences numerous landslides annually, most of which are trigged either by rainfall events or seismic activity. Here, we review the short-term rainfall patterns leading up to the slope failure at Tumbi Quarry and compare the rainfall accumulations obtained over durations of 30, 60 and 90 days prior to the landslide, with comparable rainfall accumulations obtained for other failures observed in PNG over a 12-year period. Additionally, a review of long-term rainfall over a period of 6 months prior to the failure is completed as well as an assessment of seismic activity. Based on our analysis, we believe a seismic trigger to be very unlikely, while the increase in rainfall in the 2 weeks prior to the failure in conjunction with a high-intensity rainfall event at the end of October 2011 could have had a greater influence in enhancing rather than restraining slope failure. This, in addition to natural denudational processes, geological structure and the anthropogenic activity in the vicinity of the landslide, could all have served to affect slope stability.     

Analysis of the Maierato landslide (Calabria,Southern Italy)

On 15 February 2010, a landslide of great dimensions occurred at Maierato (Calabria, Southern Italy) after a long rainy period. Although the zone was continuously affected by ground movements especially during the wet seasons, no monitoring system was installed before the occurrence of the landslide. However, many photos and two videos were taken during the failure process of the slope. In the present study, the available images are used to reconstruct the kinematics of the landslide. In addition, a finite element analysis is performed to define the main factors of triggering and to interpret the failure mechanism of the slope. This analysis is also based on the data from a site investigation carried out after the landslide to characterise the involved soils from a geotechnical viewpoint. The analysis also accounts for the strain-softening behaviour of some soils. The results have shown that the Maierato landslide was the reactivation of a pre-existing landslide body, which was caused by a significant increase in groundwater level.     

The February 2010 large landslide at Maierato, Vibo Valentia, Southern Italy

A large landslide formed at Maierato (Vibo Valencia District), Southern Italy, on 15 February 2010, at 1430?hours local time, when rapid failure occurred after several days of preliminary movements. The landslide has an area of 0.3?km², a runout distance of 1.2?km and an estimated volume of about 10?Mm³. The landslide caused nearly 2,300 inhabitants to be evacuated, with high economic losses. The most probable trigger of the landslide was the cumulative precipitation over the preceding 20?days (having a return period of more than 100?years), which followed a long period of 4?C5?months of heavy rainfall (of about 150% of the average rainfall of the period). This report presents a summary of our findings pertinent to the landslide??s activities based on our field investigations. In particular, this report covers (1) details of land deformation caused by the landslide, (2) geology pertinent to landslide development, (3) identification of the landslide mechanism and its triggering factors based on the analysis of the boring core specimens and landform features, as well as the available video of the event, and (4) preliminary evaluation of the stability of the original slope before the landslide using the finite element-based shear strength reduction method. The aim of the paper was to describe the landslide and explain its mechanism of occurrence.     

Mechanism and failure process of Qianjiangping landslide in the Three Gorges Reservoir,China

The Qianjiangping landslide is a large planar rock slide which occurred in July 14, 2003 shortly after the water level reached 135 m in the Three Gorges Reservoir, China. The landslide destroyed 4 factories and 129 houses, took 24 lives, and made 1,200 people homeless. Field investigation shows that the contributing factors for the landslide are the geological structure of the slope, the previous surface of rupture, the water level rise, and continuous rainfall. In order to reveal the mechanism and failure process of the landslide, numerical simulation was conducted on Qianjiangping slope before sliding. Based on the characteristics and the engineering conditions of the landslide, the topography and the geological profiles of Qianjiangping slope before sliding is reconstructed. The seepage field of Qianjiangping slope before sliding was simulated with the Geostudio software. The results show that ground water table rises and bends to the slope during the rise of water level, and the slope surface becomes partially saturated within the period of continuous rainfall. Using the ground water table obtained above, the failure process of Qianjiangping slope is simulated with the Flac3D software. The results demonstrate that the shear strain increment, displacement, and shear failure area of the slope increased greatly after the water level rose and continuous rained, and the landslide was triggered by the combined effect both of water level rise and continuous rainfall. The development of shear strain increment, displacement, and shear failure area of the slope shows that the landslide was retrogressive in the lower part of the slope and progressive in the upper part of the slope.