Systematic study of liquidas phase relations in olivine melilitite +H2O +CO2 at high pressures and petrogenesis of an olivine melilitite magma

Near-liquidus phase relationships of a spinel lherzolite-bearing olivine melilitite from Tasmania were investigated over a P, T range with varying , , and . At 30 kb under MH-buffered conditions, systematic changes of liquidus phases occur with increasing ( = CO₂/CO₂ +H₂O+olivine melilitite). Olivine is the liquidus phase in the presence of H₂O alone and is joined by clinopyroxene at low . Increasing eliminates olivine and clinopyroxene becomes the only liquidus phase. Further addition of CO₂ brings garnet+orthopyroxene onto the liquidus together with clinopyroxene, which disappears with even higher CO₂. The same systematic changes appear to hold at higher and lower pressures also, only that the phase boundaries are shifted to different . The field with olivine- +clinopyroxene becomes stable to higher with lower pressure and approaches most closely the field with garnet+orthopyroxene+clinopyroxene at about 27 kb, 1160 °C, 0.08 and 0.2 (i.e., 6–7% CO₂+ 7–8% H₂O). Olivine does not coexist with garnet+orthopyroxene+clinopyroxene under these MH-buffered conditions. Lower oxygen fugacities do not increase the stability of olivine to higher and do not change the phase relationships and liquidus temperatures drastically. Thus, it is inferred that olivine melilitite 2927 originates as a 5% melt (inferred from K_{2 O} and P₂O₅ content) from a pyrolite source at about 27kb, 1160 dg with about 6–7% CO₂ and 7–8% H₂O dissolved in the melt. The highly undersaturated character of the melt and the inability to find olivine together with garnet and orthopyroxene on the liquidus (in spite of the close approach of the respective liquidus fields) can be explained by reaction relationships of olivine and clinopyroxene with orthopyroxene, garnet and melt in the presence of CO₂.     

The origin of the high-K latites from Camp Creek,Arizona: constraints from experiments with variable fO2 and a_{{\text{H}}_{\text{2}} {\text{O}}}

Near-liquidus melting experiments were performed on a high-K latite at fO₂'s ranging from iron-wustite-graphite (IWG) to nickel-nickel oxide (NNO) in the presence of a C-O-H fluid phase. Clinopyroxene is a liquidus phase under all conditions. At IWG , the liquidus at 10 kb is about 1,150° C but is depressed to 1,025° C at NNO and . Phlogopite and apatite are near-liquidus phases, with apatite crystallizing first at pressures below 10 kb. Phlogopite is a liquidus phase only at NNO and high . Under all conditions the high-K latites show a large crystallization interval with phlogopite becoming the dominant crystalline phase with decreasing temperature. Increasing fO₂ affects phlogopite crystallization but the liquidus temperature is essentially a function of . The chemical compositions of the near-liquidus phases support formation of the high-K latites under oxidizing conditions (NNO or higher) and high . It is concluded from the temperature of the H₂O-saturated liquidus at 10 kb, the groundmass: crystal ratio and presence of chilled latite margins around some xenoliths that the Camp Creek high-K latite magma passed thru the lower crust at temperatures of 1,000° C or more.     

A regional gradient in the composition of metamorphic fluids in pelitic schist,Pecos Baldy,New Mexico

Two metamorphic isograds cut across graphitic schist near Pecos Baldy, New Mexico. The southern isograd marks the first coexistence of staurolite with biotite, whereas the northern isograd marks the first coexistence of andalusite with biotite. The isograds do not record changes in temperature or pressure. Instead, they record a regional gradient in the composition of the metamorphic fluid phase. Ortega Quartzite, which contains primary hematite, lies immediately north of the graphitic schist. Mineral compositions within the schist change gradually toward the quartzite, reflecting gradients in and . The chemical potential gradients, locally as high as 72 cal/m in and 9 cal/m in , controlled the positions of the two mapped isograds. The staurolite-biotite isograd records where fell below 0.80, at near 10^–23 bars; the andalusite-biotite isograd records where fell below 0.25, at near 10^–22 bars. Dehydration and oxidation were coupled by graphite-fluid equilibrium.The chemical potential gradients apparently formed during metamorphism, as graphite in schist reacted with hematite in quartzite. Local oxidation of graphite formed CO₂ which triggered dehydration reactions along the schistquartzite contact. This process created a C-O-H fluid which infiltrated into overlying rocks. Upward infiltration, local fluid-rock equilibration and additional infiltration proceeded until the composition of the infiltrating fluid evolved to that in equilibrium with the infiltrated rock. This point occurs very close to the staurolite-biotite isograd. Pelitic rocks structurally above this isograd show no petrographic evidence of infiltration, even though calculations indicate that volumetric fluid/rock ratios may have exceeded 15 and thin, rare calc-silicate beds show extensive K-metasomatism and quartz veining.     

Thermal stability of Al-Fe epidote as a function of f_{{\text{o}}_{\text{2}} } and Fe content

Laboratory experiments have been conducted with natural minerals to determine the relation of to epidote stability, and to determine stability curves for clinozoisite and epidote. Under oxidizing conditions Fe-epidote decomposes to grandite, anorthite, hematite, and quartz. Under more reducing conditions corundum becomes a stable product instead of quartz, and magnetite, and finally hercynite replace hematite. As conditions change from oxidizing to reducing the temperature of epidote breakdown decreases, epidote becomes more aluminous and the grandite produced increases in grossularite component and, to a lesser extent, in almandine.At 3000 bars under oxidizing conditions epidote is stable up to 694° C, epidote-corundum is stable to 692° C, clinozoisite is stable to 658° C, and clinozoisite-quartz is stable to 628° C. Approximate curves for the fractional decomposition of Al-Fe epidote have been determined as a function of Fe content under oxidizing conditions. Extrapolation of clinozoisite results to an Fe-free composition, and comparison with zoisite stability results suggest that at elevated pressures clinozoisite inverts with increasing temperature to zoisite along a nearly vertical phase boundary at 635±75° C.The stability relations provide an upper limit for epidote mineral stability mainly applicable to calcareous rocks. The epidote composition present in any given rock must be a function largely of bulk composition and . Zoisite replaces Al-clinozoisite in rocks of medium grade and high pressure.     

Antigorite-ophicarbonates: Phase relations in a portion of the system CaO-MgO-SiO2-H2O-CO2

The occurrence of critical assemblages among antigorite, diopside, tremolite, forsterite, talc, calcite, dolomite and magnesite in progressively metamorphosed ophicarbonate rocks, together with experimental data, permits the construction of phase diagrams in terms of the variables P, T, and composition of a binary CO₂-H₂O fluid. Equilibrium constants are given for the 30 equilibria that describe all relations among the above phases. Ophicalcite, ophidolomite, and ophimagnesite assemblages occupy partially overlapping fields in the diagram. The upper temperature limit of ophicalcite rocks lies below that of ophidolomite and ophimagnesite. The fluid phase in ophicarbonate rocks has 0.8$$ " align="middle" border="0"> , and there are indications that during their progressive metamorphism is approximately equal to P _total.     

Aluminum partitioning between olivine and ultrabasic silicate liquid to 6 GPa

Trace element analyses of 1-atm and high-pressure experiments show that in komatiite and peridotite, the olivine (OL)/liquid (L) distribution coefficient for Al₂O₃ ( ) increases with pressure and temperature. Olivine in equilibrium with liquid accepts as much as 0.2 wt% Al₂O₃ in solution at 6 GPa. Convergence to equilibrium compositions at this high level is shown by cation diffusion of Al into synthetic forsterite crystals of low-Al contents in the presence of melt. Convergence to low-Al equilibrium compositions at lower P and T is shown by diffusion of Al out of synthetic forsterite with high initial Al content. Isobaric and isothermal experimental data subsets reveal that temperature and pressure variations both have real effects on . Variation in silicate melt composition has no detectable effect on within the limited range of experimentally investigated mixtures. Least-squares regression for 24 experiments, using komatiite and peridotite, performed at 1 atm to 6 GPa and 1300 to 1960°C, gives the best fit equation: Increase in with increasingly higher-pressure melting is consistent with incorporation of a spinel-like component of low molar volume into olivine, although other substitutions possibly involving more complex coupling cannot be ruled out. High P-T ultrabasic melting residues, if pristine, may be recognized by the high calculated from microprobe analyses of Al₂O₃ concentrations in residual olivines and estimated Al₂O₃ concentration in the last liquid removed. In general the low levels of Al in natural olivine from mantle xenoliths suggest that pristine residues are rarely recovered.     

Solubility of CO2 in olivine melilitite at high pressures and role of CO2 in the earth's upper mantle

The positions of the liquidi and the near-liquidus phases of olivine-melilitite+CO₂ have been determined under MH-buffered and furnace-buffered conditions up to 40 kb. It is found that CO₂ alone lowers the liquidus compared to dry conditions, yet its influence is minor compared to H₂O. The major role of CO₂ is to favour the growth of orthopyroxene and garnet over that of olivine at least at high pressures. CO₂-contents of glasses from experiments just above the liquidus (MH-buffered) were determined as 5.1 % at 10kb; 7.5 % at 20kb, 9.3 % at 30kb and 10–11 % (estimated) at 40 kb. Experiments on (pyrolite –40 % olivine)+H₂O+CO₂ show that CO₂ occurs under mantle conditions as carbonate under subsolidus conditions and dissolved in a melt above the solidus. At 30kb, the solidus lies between 1,000 ° C and 1,050 ° C for vapour-saturated conditions, at and at .     

Dry granulite mineral assemblages in the contact aureoles of the Nain complex,Labrador

Thermal aureoles surrounding intrusions of the Nain complex, Labrador, contain many unique or unusual mineral assemblages in aluminous gneisses and granulites, ironstones, and ultramafic rocks. Some of the limiting assemblages are (in addition to feldspars±pyrrhotite±ilmenite±graphite ±biotite±magnetite): Ga-Ol-Hy-Sp, Ga-Cd-Hy-Sp, Ga-Hy-Ol-Qz, Cd-Hy-Os-Qz, Ga-Cd-Sp-Si, Cd-Sp-Co-Si, Ga-Ol-Hy-Sp, Ga-Cd-Hy-Sp, Hy-Ol-Qz-Aug, and Ol-Hy-Sp(±Chl±Ca-amph±Aug). On the basis of some of these assemblages are (in addition to feldspars±pyrrhotite±ilmenite±graphite from 3.7–6.6 kbar and temperatures from 645–915 ° C. The paucity of hydrous phases, the preponderance of Ksp-Plag-Qz or even Cd-Ksp-Qz without evidence of a melt at these temperatures, the stable occurrence of osumilite, and the common presence of graphite suggest that was extremely low. The presence of graphite-pyrrhotite, the compositions of ilmenites, the compositions of coexisting Fe-Ti oxides, and other mineralogical data indicate the was relatively low and, despite the wide range in bulk compositions and rock types, may have followed an approximately buffered trend. It is possible that the magmas of the Nain complex may have acted as an external buffer for the aureole rocks. The unique nature of these mineral assemblages appears to be a function of the extremely low .     

Stability of the assemblage cordierite +K feldspar+quartz

Under hydrous conditions the stability field of the assemblage Mg-cordierite+K feldspar+quartz is limited on its low-temperature side by the breakdown of cordierite+K feldspar into muscovite, phlogopite and quartz, whereas the high-temperature limit is given by eutectic melting. The compatibility field of the assemblage ranges from 530° C to 745° C at 1 kbar , from 635 to 725° C at 3 kbars , from 695 to 725° C at 5 kbars and terminates at 5.5 kbars . Most components not considered in the model system will tend to restrict this field even more. However, the condition < P _total will increase the range of stable coexistence drastically, making the assemblage common at elevated temperatures from contact metamorphic rocks up to intermediate pressure granulites of appropriate bulk composition.     

Fe2+-Mg2+ partition between coexisting cordierite and garnet — a discussion of the experimental data

The partition of iron and magnesium between cordierite and garnet depends on as well as temperature. The apparently conflicting experimental data on the values of K _D may be reconciled by considering the pertaining during the different experiments.     

Water in microcrystalline quartz of volcanic origin: Agates

Agates of volcanic origin, containing the different quartz species, fibrous, length-fast chalcedony (CH), granular fine quartz (FQ), and fibrous, length-slow, to lepidospheric quartzine (QN), have been investigated to evaluate possible relations between microstructure, i.e. crystallite size and texture, refractive indices, densities, contents of trace elements and of water, as well as dehydration behaviour. By means of near infrared spectroscopy, total water contents , could be differentiated quantitatively into contents of molecular water, , and silanole-group water, . Despite the low total water contents of the agates studied ( between 1 and 2 wt.%), near infrared spectroscopy results in reliable data on and .Wall-layering CH consists of fibrous quartz crystals and exhibits higher C-ratios, , than horizontally layered FQ which consists predominantly of granular quartz crystals (C _CH=0.45±0.11 (N=6), C _FQ=0.36±0.10 (N=4). This result is interpreted to be due to analogy with the behaviour of C-ratios in fluid phase-deposited opals-AN (hyalithe) and liquid phase-deposited opals-AG (non-crystalline opal) or -CT (common opal) (Langer and Flörke 1974).Translucent layers of CH show mostly lower refractive indices, when measured parallel than when measured perpendicular to the axes of the quartz fibers. The same is true for milky layers of CH. Crystallite sizes are smaller in the latter than in the former.For all samples studied, exists a positive correlation between at% (1/2Ca+1/2Mg+Na+K+Li) and at% (Al³⁺+Fe³⁺). This indicates that at least parts of (A1³⁺+ Fe³⁺) substitute for Si in the quartz structure. The charge is balanced by incorporation of di- and mono-valent cations in structural interstices. When the quantity at % H⁺, as obtained from , is included into the sum at% (1/2 Me²⁺+Me⁺), the above correlation is destroyed. This result could be indicative for a strong concentration of the Si-OH groups in the surface of the quartz microcrystallites.     

Relationship between fluid-bearing and fluid-absent invariant points and a petrogenetic grid for a greenschist facies assemblage in the system CaO-MgO-Al2O3-SiO2-CO2-H2O

In the 6 component system CaO-MgO-Al₂O₃-SiO₂-CO₂-H₂ with 9 solid phases (quartz, plagioclase, epidote, tremolite, talc, chlorite, magnesite, calcite, dolomite) and a fluid phase, all 17 possible fluid-absent reactions have been set up and balanced. Using molar entropy and volume data for the solid phases, these reactions are arranged in P-T space about the 8 possible fluid-absent invariant points after the method of Schreinemakers. Field observations in Ordovician greenschist facies basic volcanics at Sofala N.S.W., indicate that neither talc+epidote nor magnesite+calcite are stable under the conditions of metamorphism. Assuming these conditions to apply to the theoretical study here, the fluid-absent invariant points are arranged in a relative fashion with fluid-absent reactions subdividing P-T space into smaller areas.A scheme which permits a fluid of composition (i.e. a fluid containing CO₂ and H₂O together with other components), is modeled by treating H₂O as a mobile component independent of CO₂, and by allowing values that lie off the locus of binary H₂O-CO₂. Taking into account that neither talc+epidote nor magnesite +calcite is to be permitted, the fluid scheme is used to set up and balance all 39 possible fluid-bearing reactions. These are then arranged about 20 valid fluid-bearing invariant points in space after the method of Korzhinskii and Sehreinemakers.A characteristic solid phase assemblage is defined for each P-T area using chemographic relations inherent from the fluid-absent boundary reactions. The fluid-bearing invariant points that have a solid assemblage compatible with the characteristic assemblage in a particular P-T area are stable within the P-T regime of that area. When these stable fluidbearing invariant points are arranged in a relative fashion in space, they outline a fluid grid which can be used to study the possible effects of local variation in X _fluid over the particular P-T regime.Symbols Used U chemical potential - S entropy - V molar volume - n coefficient of a phase in a reaction - X mole fraction - T temperature - P pressure - F number of degrees of freedom - C number of components - p number of phases - s solid - slope of reaction - 1 quartz - 2 plagioclase - 3 epidote - 4 tremolite - 5 talc - 6 chlorite - 7 dolomite - 8 magnesite - 9 calcite     

Aenigmatite,sodic pyroxene,arfvedsonite and associated minerals in syenites from Morotu,Sakhalin

Aenigmatite, sodic pyroxene and arfvedsonite occur as interstitial minerals in metaluminous to weakly peralkaline syenite patches in alkali dolerite, Morotu, Sakhalin. Aenigmatite is zoned from Ca, Al, Fe³⁺-rich cores to Ti, Na, Mn, Si-rich rims reflecting the main substitutions Fe²⁺Ti⁴⁺Fe³⁺, NaSiCaAl and Mn²⁺Fe²⁺. Aenigmatite replaces aegirine and ilmenite supporting the existence of a no-oxide field in — T space. In one case aenigmatite has apparently formed by reaction between ilmenite and arfvedsonite. Titanian aegirine (up to 3.0 wt% TiO₂) and Fe-chlorite may replace aenigmatite. Sodic pyroxene occurs as zoned crystals with cores of aegirine-augite rimmed by aegirine and in turn by pale green aegirine containing 93 mol% NaFe³⁺Si₂O₆. Additional substitution of the type NaAlCaFe²⁺ is indicated by significant amounts (up to 6 mol%) of NaAlSi₂O₆. Arfvedsonite is zoned with rims enriched in Na, Fe and depleted in Ca which parallels the variation of these elements in the sodic pyroxenes.The high peralkalinity of the residual liquid from which the mafic phases formed resulted from the early crystallization of microperthite (which makes up the bulk of the syenites) leading to an increase in the Na₂O/(Na₂O+K₂O) and (Na₂O+K₂O)/Al₂O₃ ratios of the remaining interstitial liquid which is also enriched in Ti, Fe, and Mn. Bulk composition of the melt, , temperature and volatile content were all important variables in determining the composition and stability of the peralkaline silicates. in the residual liquid appears to have been buffered by arfvedsonite-aegirine and later by the arfvedsonite-aenigmatite and aenigmatite-aegirine equilibria under conditions of a no-oxide field. An increase in , above that of the alkali buffer reactions, is inferred by an increase of Ti and Mn in aenigmatite rims. The latest postmagmatic vapour crystallization stage of the syenites is marked by extremely low which may have been facilitated by exsolution of a gas phase. Low is supported by the replacement of aenigmatite by titanian aegirine, and the formation of rare Ti-rich garnet with a very low (Ti⁴⁺+Fe³⁺)/(Ti+Fe) ratio of 0.51, associated with leucoxene alteration of ilmenite.     

Manganese olivine I: Electrical conductivity

To investigate the point defect chemistry and the kinetic properties of manganese olivine Mn₂SiO₄, electrical conductivity () of single crystals was measured along either the [100] or the [010] direction. The experiments were carried out at temperatures T=850–1200 °C and oxygen fugacities atm under both Mn oxide (MO) buffered and MnSiO₃ (MS) buffered conditions. Under the same thermodynamic conditions, charge transport along [100] is 2.5–3.0 times faster than along [010]. At high oxygen fugacities, the electrical conductivity of samples buffered against MS is 1.6 times larger than that of samples buffered against MO; while at low oxygen fugacities, the electrical conductivity is nearly identical for the two buffer cases. The dependencies of electrical conductivity on oxygen fugacity and temperature are essentially the same for conduction along the [100] and [010] directions, as well as for samples coexisting with a solid-state buffer of either MO or MS. Hence, it is proposed that the same conduction mechanisms operate for samples of either orientation in contact with either solid-state buffer.The electrical conductivity data lie on concave upward curves on a log-log plot of vs , giving rise to two regimes with different oxygen fugacity exponents. In the low- regime , the exponent, m, is 0, the MnSiO₃-activity exponent, q, is 0, and the activation energy, Q, is 45 kJ/mol. In the high regime 10^{ - 7} {\text{atm}}} \right)$$ " align="middle" border="0"> , m=1/6, q=1/4–1/3, and Q=45 and 200 kJ/mol for T<1100 °c=" and=">T>1100 °C, respectively.     

Estimation of the depth of origin of basic magmas: A modified thermodynamic approach and a comparison with experimental melting studies

Thermodynamic calculations, modified after Nicholls et al. (1971), which relate the activity of silica in a lava to the temperature and pressure conditions at which the lava could be in equilibrium with a mantle mineral assemblage, have been extended to H₂O-bearing magmas by using published experimental data to derive the dependence of on the weight fraction of H₂O dissolved in a magma. A petrogenetic grid has been calculated which gives the P-T conditions under which a magma with a given at its liquidus at 1 atm could equilibrate with a mantle mineral assemblage containing olivine (ol) and orthopyroxene (opx) for different amounts of H₂O in the magma at its source. This grid is in good agreement with the results of experimental studies as summarized by Green (1971) and Brey and Green (1975). The results show that the pressure at which a given magma composition can equilibrate with ol + opx increases for increasing amounts of H₂O dissolved in the magma at depth.In addition, experimental data have been used to calculate the effect of olivine crystallization and removal on the in the residual liquid to assess the effect of low-pressure differentiation on . The results show that if 20 % olivine is added to a basalt magma, its calculated pressure of equilibration with ol+opx increases by 4–5 kbar for a given temperature. The calculated effects of olivine removal and H₂O addition on are reasonably consistent with the silicate mixing model of Burnham (1975).Thermodynamic calculations of this type may be useful for assessing the internal consistency of certain experimental data, and in extrapolating the results to other magma compositions. The application of these calculations to determining the possible depth of origin of natural lavas appears to be limited primarily by the difficulty in determining in a lava at its liquidus temperature.     

Manganese pyroxenoids and carbonates: Critical phase relations in metamorphic assemblages from the Alps

The compositions of coexisting pyroxmangites, rhodonites, rhodochrosites and manganese calcites in regional metamorphosed manganese cale-silicate marbles from Val Scerscen and Alagna were analysed by microprobe and permit definition of critical tie lines at metamorphic grades appropriate to temperatures between 400 and 450 °C.Variations in composition of coexisting mineral pairs in one and the same locality are attributed to variations in and not to metamorphic temperatures. From the analysed assemblages isothermal plots (with SiO₂ as excess component) were constructed for the system CaO-MnO-SiO₂-CO₂.     

Devolatilization equilibria in graphite-pyrite-pyrrhotite bearing pelites with application to magma-pelite interaction

The proportions of species in a C-O-H-S fluid in equilibrium with graphite, pyrite and pyrrhotite were calculated for a range of pressure, temperature and conditions, using the equilibrium constants and mass balance method, for ideal and non-ideal mixing in the fluid. Under typical metamorphic conditions, H₂O, CO₂, CH₄ and H₂S are the principal fluid species with H₂S favored by higher temperatures, lower pressures and lower conditions. The dominance of H₂S in the fluid at high temperatures leads to values of becoming significantly less than 1, and causes hydrous minerals to dehydrate at lower temperatures than the case when . The production of H₂S-bearing fluids provides a mechanism for the selective transfer of sulfur from a graphite-pyrite-pyrrhotite bearing pelite into a pluton via a fluid phase, without requiring wholesale melting and assimilation of rocks. Such a process is feasible if a magma is intruded by stoping, which allows a significant volume of pelite country rock to be raised rapidly to temperatures approaching that of the magma. H₂S-bearing fluids produced from graphite-pyrite-pyrrhotite pelites (due either to magmatic intrusion or regional metamorphism) may also mobilize ore-forming metals as sulfide complexes.     

An almandine garnet isograd in the Rogers Pass area,British Columbia: The nature of the reaction and an estimation of the physical conditions during its formation

In the Rogers Pass area of British Columbia the almandine garnet isograd results from a reaction of the form: 5.31 ferroan-dolomite+8.75 paragonite+4.80 pyrrhotite+3.57 albite+16.83 quartz+1.97 O₂=1.00 garnet+16.44 andesine+1.53 chlorite+2.40 S₂+1.90 H₂O+10.62 CO₂. The coefficients of this reaction are quite sensitive to the Mn content of ferroan-dolomite.Experimental data applied to mineral compositions present at the isograd, permits calculation of two intersecting P, T equilibrium curves. P=29088–39.583 T is obtained for the sub-system paragonite-margarite (solid-solution), plagioclase, quartz, ferroan-dolomite, and P=28.247 T–14126 is obtained for the sub-system epidote, quartz, garnet, plagioclase. These equations yield P=3898 bars and T=638° K (365° C). These values are consistent with the FeS content of sphalerite in the assemblage pyrite, pyrrhotite, sphalerite and with other estimates for the area.At these values of P and T the composition of the fluid phase in equilibrium with graphite in the system C-O-H-S during the formation of garnet is estimated as: bars, bars, bars, bars, bars, bars, bars, bars, , bars, bars.     

Petrology and phase relations of the kyanite-eclogites from eastern Turkey

Eclogites are found as lenses or layers in the Precambrian gneiss terrain of the Bitlis Massif in eastern Turkey. Kyanite-eclogites from the region of Gablor Hill in the Bitlis Massif exhibit relatively minor alteration, and consist of garnet, omphacite, kyanite, zoisite, calcic amphibole, phengite, rutile and quartz. In terms of geological setting and mineral compositions, Gablor eclogites are very similar to eclogites from high-grade gneiss terrains. Metamorphic conditions during the eclogite crystallisation are determined as 625±35° C and 16±3 kbars. The coexistence of white mixa, omphacite and kyanite constrains between 0.4 and 1. Primary calcic amphiboles from the Gablor eclogites exhibit conflicting textures, indicating stable coexistence with, as well as growth from omphacite and garnet. This is explained by a buffering reaction between amphibole, garnet, omphacite, zoisite and kyanite during the eclogite crystallisation, whereby is controlled and buffered by the mineral assemblage.     

APL computer programs for thermodynamic calculations of equilibria in P-T-X CO 2 space

APL computer programs for the thermodynamic calculation of devolatilization and solid-solid equilibria operate using stored values for the molar volume and entropy of solids, the free energies of H₂O and CO₂, and the free energies of formation for 110 geologically-important phases. P-T-X _{CO 2} calculations of devolatilization equilibria can be made at pressures from 0.2 through 10 kb, and temperatures from 200 through 1,000° C. P-T-X calculations of solid-solid equilibria may be accomplished at pressures to 30 kb and temperatures to 1,000° C. Calculations can be extrapolations from experimental points, or direct calculations from thermochemical data alone. Options are available in these programs to consider effects of: real vs. ideal gas mixing, thermal expansion and compressibility, solid solution, fluid pressure differing from solid pressure, and uncertainties in high-temperature entropies.A collection of thermodynamic data programs accompanies the programs for calculating P-T-X _{CO 2} equilibria. Over a wide range of physical conditions, the data functions report free energies, entropies, fugacities of H₂O and CO₂, high temperature entropies of solids, and activities of components in H₂O-CO₂ mixtures.List of Symbols Activity of H₂O and CO₂ - G_f Free energy of formation of a phase from elements - G_r Free energy change of reaction - G _r ^o Standard state free energy change of a reaction - Free energies of pure H₂O and CO₂ - H _r ^o Standard state enthalpy change for a reaction - K Equilibrium constant - R Gas constant - S _r ^o Standard state entropy change of reaction - S _s ^o Standard state entropy change of solids in a reaction - V_s ^o Standard state volume change of a reaction - V_s ^o Standard state volume change of solids in a reaction - Mole fraction of H₂O and CO₂ - Activity coefficient of H₂O and CO₂