Avalonian (Pan-African) mylonitic deformation west of Boston, U.S.A.

West of Boston, Mass., Castle and others (1976) recognized an up to 5km wide, possibly folded, NE-SW trending Burlington Mylonite Zone. We have extended mapping south into Natick and Framington quadrangles, and supplemented it by fixing local directions of tectonic motion, which are more variable than reported by Goldstein (1989). In Natick the mylonite zone is partly migmatized and converted into blastomylonites, forming the lithodemic Rice Gneiss and is intersected by the Dedham Granite dated ca 630 Ma. The granite also invades deformed, folded, and commonly mylonitized Westboro Quartzite. Thus mylonitization, folding, and formation of migmatitic blastomylonites are all earlier than ca 630 Ma, and can collectively be attributed to the main phase of the Avalonian orogeny that in Africa is referred to as the Pan-African I. The sense of movements in the Rice Gneiss is generally sinistral strike-slip with a NE-SW trend of foliation. Other local mylonites have more variable directions of motion.A narrower E-W zone of mylonitization has been recognized by Grimes (M.S. thesis 1993, Boston College) and named the Nobscot Shear Zone. It affects the Milford Granite, also about 630 Ma in age, while similar but narrow shear zones affect other local granites including the Dedham. These zones, dipping steeply north and including the Nobscot, are less intensely mylonitized and are not associated with migmatites. Their age is not known, but since they affect only Precambrian rocks, they are assumed to be late Proterozoic. We attribute these zones to the second stage of the Avalonian or the Pan-African II.The older rocks west of Boston are widely affected by numerous brittle faults. These are all of unknown age, but probably Phanerozoic. The most significant brittle fault in the Burlington area is the mid to late Paleozoic Bloody Bluff Fault. We do not associate large scale mylonitization with that fault, because the mylonites are commonly cut by undeformed or little deformed Siluro-Devonian gabbro-diorites.     

Geophysical modeling of the northern Appalachian Brompton-Cameron, Central Maine, and Avalon terranes under the New Jersey Coastal Plain

A regional terrane map of the New Jersey Coastal Plain basement was constructed using seismic, drilling, gravity and magnetic data. The Brompton-Cameron and Central Maine terranes were coalesced as one volcanic island arc terrane before obducting onto Laurentian, Grenville age, continental crust in the Taconian orogeny [Rankin, D.W., 1994. Continental margin of the eastern United States: past and present. In: Speed, R.C., (Ed.), Phanerozoic Evolution of North American Continent-Ocean Transitions. DNAG Continent-Ocean Transect Volume. Geological Society of America, Boulder, Colorado, pp. 129–218]. Volcanic island-arc rocks of the Avalon terrane are in contact with Central Maine terrane rocks in southern Connecticut where the latter are overthrust onto the Brompton-Cameron terrane, which is thrust over Laurentian basement. Similarities of these allochthonous island arc terranes (Brompton-Cameron, Central Maine, Avalon) in lithology, fauna and age suggest that they are faulted segments of the margin of one major late Precambrian to early Paleozoic, high latitude peri-Gondwana island arc designated as “Avalonia”, which collided with Laurentia in the early to middle Paleozoic. The Brompton Cameron, Central Maine, and Avalon terranes are projected as the basement under the eastern New Jersey Coastal Plain based on drill core samples of metamorphic rocks of active margin/magmatic arc origin. A seismic reflection profile across the New York Bight traces the gentle dipping (approximately 20 degrees) Cameron's Line Taconian suture southeast beneath allochthonous Avalon and other terranes to a 4 sec TWTT depth (approximately 9 km) where the Avalonian rocks are over Laurentian crust. Gentle up-plunge (approximately 5 degrees) projections to the southwest bring the Laurentian Grenville age basement and the drift-stage early Paleozoic cover rocks to windows in Burlington Co. at approximately 1 km depth and Cape May Co. at approximately 2 km depths. The antiformal Shellburne Falls and Chester domes and Chain Lakes-Pelham dome-Bronson Hill structural trends, and the synformal Connecticut Valley-Gaspe structural trend can be traced southwest into the New Jersey Coastal Plain basement. A Mesozoic rift basin, the “Sandy Hook basin”, and associated eastern boundary fault is identified, based upon gravity modeling, in the vicinity of Sandy Hook, New Jersey. The thickness of the rift-basin sedimentary rocks contained within the “Sandy Hook basin” is approximately 4.7 km, with the basin extending offshore to the east of the New Jersey coast. Gravity modeling indicates a deep rift basin and the magnetic data indicates a shallow magnetic basement caused by magnetic diabase sills and/or basalt flows contained within the rift-basin sedimentary rocks. The igneous sills and/or flows may be the eastward continuation of the Watchung and Palisades bodies.     

沂沭断裂带中段基底韧性剪切带

在沂沭断裂带中段的泰山群结晶基底中,存在着一系列北东、北北东走向的左行韧性剪切带。对其中发育糜棱岩的韧性剪切带的结构构造、应变测量、变形岩石的显微构造、显微组构以及长石粒度和含量的变化规律进行了观测分析。讨论了韧性剪切带的变形条件和机制。及其递进发展的趋势。指出基底韧性剪切带是沂沭断裂带元古宙时期断裂活动时在地壳较深层次上形成的构造表象。在此基础上,讨论了地壳不同层次上的断裂变形及断裂岩石的综合分类问题     

Multiple generations of pseudotachylyte in the brittle to ductile regimes, Qinling–Dabie Shan ultrahigh-pressure metamorphic complex, central China

Abstract Pseudotachylytes are present along the Dahezhen shear zone in the Qinling–Dabie Shan collisional orogenic belt, central China. Two types of pseudotachylyte vein are documented in the shear zone: cataclasite‐related pseudotachylyte (C‐Pt) and mylonite‐related pseudotachylyte (M‐Pt). M‐Pt is associated with mylonite‐development and is overprinted by C‐Pt. All of the quartz and most of the feldspar porphyroclasts within the M‐Pt are plastically deformed, but not in the C‐Pt. Dynamically recrystallized fine‐grained quartz and feldspar bands are oriented subparallel to the mylonite and M‐Pt foliation, and partially surround the porphyroclasts. Our results suggest that the M‐Pt formed cyclically in the ductile region at estimated conditions of 400–650°C and 400–800 MPa due to propagation of seismic fracturing associated with the thrusting‐related rapid exhumation of the ultrahigh‐pressure metamorphic complex in the brittle regime down to a greater depth than the base of the seismogenic zone. The M‐Pt and mylonite formed in the Dahezhen shear zone at estimated conditions of 400–650°C and 400–800 MPa. The coexistence of C‐Pt and M‐Pt in the same shear zone suggests that repeated seismic slips occurred in both the brittle and ductile portions of the crust during the thrusting‐related rapid exhumation of the ultrahigh‐pressure metamorphic complex.     

Kinematics of the Rockland Brook Fault, Nova Scotia: Implications for the interaction of the Meguma and Avalon terranes

The Cobequid-Chedabucto fault system of northern mainland Nova Scotia represents the surface expression of the Avalon-Meguma terrane boundary, but because it is exposed at high crustal levels in the Cobequid Highlands, the fault system provides little information as to the kinematic relationships of the two terranes in this area. In the eastern Cobequid Highlands, the Rockland Brook Fault (RBF) is exposed within the more deeply eroded highlands massif and juxtaposes units of widely varying ages and lithologies. Therefore, this fault is better suited to define the nature and timing of fault movement associated with Avalon-Meguma terrane interaction.In several large Carboniferous plutons along the length of the RBF, and in previously deformed Precambrian rocks, mylonitic foliation orientations are predominantly east-west trending and mineral lineations plunge southeast. Kinematic indicators such as minor fold vergence, porphyroclast systems, asymmetric boudins, shear-band fabrics, and preferred recrystallization orientations indicate dextral shear. These data are taken to infer that the central section of the RBF is dominated by dextral strike-slip motion. Transpression occurs locally where the RBF curves into restraining bends. Kinematic data in these bends indicate top to the northwest thrusting. At the easternmost extent of the RBF, high-level brittle normal faults predominate in the locally extensional environment. The timing of RBF movement is constrained only by the ca 360 Ma granite bodies which it deforms and by the Westphalian sedimentary rocks which are affected by only the latest stages of movement.These kinematic data are consistent with previously published kinematic models for the interaction of the southern margin of the Avalon Composite Terrane with the Meguma Terrane in mainland Nova Scotia. These models suggest that regional dextral shear was accompanied by localized components of transpressional thrusting, wrench tectonism, and small-scale sedimentary basin development during Devonian to Carboniferous terrane interaction.     

Exhumed Himalayan-type syntaxis in the Grenville orogen, northeastern Laurentia

A deep-seated analog of the syntaxis developed in the Tibetan Plateau occurs in the Grenville Orogen of eastern Laurentia. During the final assembly of Rodinia, Amazonia collided with Laurentia and produced a series of large, conjugate, transcurrent, shear systems and pervasive strike-slip deformation that overprinted compressional structures related to the Ottawan Orogeny (the last orogenic phase of what is considered Grenvillian). A northeast-striking dextral system at least 35-km wide developed in the Reading Prong of New York (locally known as the Hudson Highlands), New Jersey, and Pennsylvania. U-Pb SHRIMP zircon geochronology and Ar/Ar thermochronology on the lowest grade cataclasites constrain the age of movement between 1008 and 876 Ma. A 60-km-wide, east-west striking, sinistral shear system developed across the central Adirondack Highlands. This system overprints rocks with granulite-facies metamorphic assemblages containing ca. 1050 Ma metamorphic zircons and is cut by a swarm of 950 Ma leucogranites. The timing, geometric relationships, and shear sense of the Adirondacks and Reading Prong shear systems suggest a conjugate system within a syntaxis with bulk compression directed ENE–WSW. This tectonic scenario invokes a component of strike-parallel deformation during the Ottawan Orogeny and provides a kinematic mechanism for an otherwise enigmatic, synchronous, late (ca. 930 Ma) extensional event including the Carthage–Colton mylonite zone in the northwest Adirondacks and Canada.     

Tectonic evolution of the ultrahigh-pressure (UHP) and high-pressure (HP) metamorphic belts from central China

Abstract In the Triassic suture between the Sino-Korean and Yangtze cratons, the Dabie metamorphic Complex in central China includes three tectonic units: the northern Dabie migmatitic terrane, the central ultrahigh-P coesite- and diamond-bearing eclogite belt, and the southern high-P blueschist-eclogite belt. This complex is bounded to the north by a north-dipping normal fault with a Paleozoic accretionary complex and to the south by a north-dipping reverse fault with Yangtze basement plus its foreland fold-and-thrust sequence. Great differences in metamorphic pressure suggests that these units reached different depths during metamorphism and their juxtaposition occurred by wedge extrusion of subducted old continental fragments. These units were subsequently subjected to (i) Barrovian type regional metamorphism and deformation at shallow depths; (ii) intrusion of Cretaceous granitic plutons; and (iii) doming and segmentation into several blocks by normal and strike-slip faults. A new speculative model of tectonic exhumation of UHP rocks is proposed.     

Archean inheritance in zircon from late Paleozoic granites from the Avalon zone of southeastern New England: an African connection

In southeastern New England the Narragansett Pier Granite locally intrudes Carboniferous metasedimentary rocks of the Narragansett basin, and yields a monazite UPb Permian emplacement age of 273 ± 2Ma. Zircon from the Narragansett Pier Granite contains a minor but detectable amount of an older, inherited component, and shows modern loss of lead. Zircon from the late-stage, aplitic Westerly Granite exhibits a more pronounced lead inheritance —permitting the inherited component to be identified as Late Archean. Such old relict zircon has not been previously recognized in Proterozoic to Paleozoic igneous rocks in New England, and may be restricted to late Paleozoic rocks of the Avalon zone. We suggest that the Archean crustal component reflects an African connection, in which old Archean crust was underplated to the Avalon zone microplate in the late Paleozoic during collision of Gondwanaland with Avalonia.     

Distribution of ductile deformation around the Main Central Thrust zone at the frontal part of nappe in southeastern Nepal Himalaya

A geological survey and morphological analysis of quartz grains were performed to investigate the distribution of ductile deformation caused by the Himalayan Main Central Thrust (MCT) around Dhankuta, southeastern Nepal. The MCT was mapped as the lithological boundary between the gneiss of the Higher Himalayan Crystalline (HHC) as the hanging wall and the inverted metamorphic sequence of the Lesser Himalayan Sediments (LHS) as the footwall. The MCT was found to truncate various stratigraphic levels of LHS and cuts a map‐scale gentle fold developed in the LHS. Ductile deformation was quantified by fractal dimension between size and perimeter of dynamically recrystallized quartz grains in bedded metaquartzite intercalated in both HHC and LHS. Serrate and polygonal shapes of quartz indicate large and small strain rates, respectively, when the temperature during ductile deformation was assumed to be uniform. A peak of strain rate was found at the lithological boundary with the peak width of ca. 500 m. Such a thin shear zone is favorable for producing frictional heat to promote the inverted metamorphism in LHS.     

SHRIMP zircon U-Pb ages for the Paleoproterozoic metamorphic-magmatic events in the southeast margin of the North China Craton

A garnet-pyroxene bearing amphibolite as a xenolith hosted by the Mesozoic igneous rocks from Xuzhou-Suzhou area was dated by zircon SHRIMP U-Pb method, which yields a metamorphic age of 1918 ± 56 Ma. In addition, the zircons from a garnet amphibolite as a lens interbedded with marble in the Archean metamorphic complex named Wuhe group in the Bengbu uplift give a metamorphic U-Pb age of 1857 ± 19 Ma, and the zircons from Shimenshan deformed granite in the eastern margin of the Bengbu uplift give a magma crystallization U-Pb age of 2054 ± 22 Ma. Both the Xuzhou-Suzhou area and Bengbu uplift are located in the southeastern margin of the North China Craton. Therefore, these ages indicate that there is a Paleoproterozoic tectonic zone in the southeastern margin of the North China Craton, and its metamorphic and magmatic ages are consistent with those of the other three Paleoproterozoic tectonic zones in the North China Craton. In view of the large scale sinistral strike-slip movement occurred at the Mesozoic along the Tan-Lu fault zone, the position of the eastern Shandong area, which is a south section of the Paleoproterozoic Jiao-Liao-Ji Belt, was correlated to Xuzhou-Suzhou-Bengbu area prior to movement of the Tan-Lu fault zone. This suggests that the Xuzhou-Suzhou-Bengbu Paleoproterozoic tectonic zone might be a southwest extension of the Paleoproterozoic Jiao-Liao-Ji Belt. Supported by National Natural Science Foundation of China (Grant No. 40634023)     

A viscoelastic shear zone model of compressional and extensional plate boundaries

A model is proposed describing the mechanical evolution of a shear zone along compressional and extensional plate boundaries, subject to constant strain rate. The shear zones are assumed as viscoelastic with Maxwell rheology and with elastic and rheological parameters depending on temperature and petrology. Stress and strain are computed as functions of time and depth. For both kinds of boundaries the model reproduces the existence of a shallow seismogenic zone, characterized by a stress concentration. The thickness of the seismogenic layer is evaluated considering the variations of shear stress and frictional strength on faults embedded in the shear zone. Assuming that a fault dislocation takes place, the brittle-ductile transition is assumed to occur at the depth at which the time derivative of total shear stress changes from positive to negative values. The effects of different strain rates and geothermal gradients on the depth of the brittle-ductile transition are studied. The model predictions are consistent with values inferred from seismicity data of different boundary zones.     

SEASAT geoid anomalies and the Macquarie Ridge complex

The seismically active Macquarie Ridge complex forms the Pacific-India plate boundary between New Zealand and the Pacific-Antarctic spreading center. The Late Cenozoic deformation of New Zealand and focal mechanisms of recent large earthquakes in the Macquarie Ridge complex appear consistent with the current plate tectonic models. These models predict a combination of strike-slip and convergent motion in the northern Macquarie Ridge, and strike-slip motion in the southern part. The Hjort trench is the southernmost expression of the Macquarie Ridge complex. Regional considerations of the magnetic lineations imply that some oceanic crust may have been consumed at the Hjort trench. Although this arcuate trench seems inconsistent with the predicted strike-slip setting, a deep trough also occurs in the Romanche fracture zone.Geoid anomalies observed over spreading ridges, subduction zones, and fracture zones are different. Therefore, geoid anomalies may be diagnostic of plate boundary type. We use SEASAT data to examine the Macquarie Ridge complex and find that the geoid anomalies for the northern Hjort trench region are different from the geoid anomalies for the Romanche trough. The Hjort trench region is characterized by an oblique subduction zone geoid anomaly, e.g., the Aleutian-Komandorski region. Also, limited first-motion data for the large 1924 earthquake that occurred in the northern Hjort trench suggest a thrust focal mechanism. We conclude that subduction is occurring at the Hjort trench. The existence of active subduction in this area implies that young oceanic lithosphere can subduct beneath older oceanic lithosphere.     

Features and origin time of Mesozoic strike-slip structures in the Yilan-Yitong Fault Zone

The NE-striking Yilan-Yitong Fault Zone(YYFZ) with a length of ca. 900 km is an important major fault zone in northeastern China. Its origin has been a controversial issue for a long time. Detailed field investigation and comprehensive analyses show that strike-slip faults or ductile shear belts exist as the origination structures on the both shoulders of the Cretaceous-Paleogene grabens. These strike-slip structures are dominated by brittle transcurrent faults, and appear as ductile shear belts only in the Weiyuanpu-Yehe and Shulan parts in the south and middle of the fault zone, respectively. The shear belts strike NE-SW and show steep mylonitic foliation and gentle mineral elongation lineation. Outcrop structures, microstructures and quartz c-axis fabrics demonstrate a sinistral shear sense with minor reverse component for the ductile shear belts. The microstructures suggest deformation temperatures of 400–450°C for the Weiyuanpu-Yehe shear belts and 350–400°C for the Shulan shear belt. A series of zircon U-Pb dating results for deformed and undeformed plutons or dikes in the shear belts constrain the strike-slip motion to the time between 160 and 126 Ma. It is further inferred from ages of main geological events in this region that the fault zone originated in the earliest Early Cretaceous. It is suggested therefore that the southern and middle parts of the Tan-Lu Fault Zone, which originated in Middle Triassic, propagated into northeastern China along the sinistral YYFZ under the earliest Early Cretaceous regional compression that is referred to as the Yanshan B event. The earliest Early Cretaceous initiation of the YYFZ results from both the high-speed oblique subduction of the Izanagi Plate and the final closure of the Mongol-Okhotsk Ocean, but the Izanagi Plate subduction played a major dynamic role in the fault zone origin.     

Phengite compositions and post-nappe high-pressure metamorphism in the pennine zone of the French Alps

A systematic study of relict highly substituted phengite micas (Si_3.6–3.7) formed in the less deformed and less recrystallized rocks of the internal zone of the French Alps shows that silica content “isograds” for phengites cut across major thrust boundaries. This indicates that a high-pressure metamorphism was post-nappe in the orogenic sequence. Little substituted, secondary phengites and those found in highly recrystallized rocks reflect metamorphic conditions which occurred during the later mountain building phases of the orogeny.Variations of mica phengite content within mineral facies zones indicate rather important differences in pressure along the Pennine zone in going from low- to high-temperature mineral facies.     

Structure and deformational character of strike-slip fault zones

Strike-slip fault zones observed either in the field or in model experiments generally consist of several subparallel faults which make these zones complicated in geometry and kinematics. The geometry of a strike-slip fault or shear zone is dependent on arrangement (pinnate or en echelon), on step (left step or right step), and on the rank )smaller faults within larger faults) of the subparallel fault. The relations and interactions of these three factors create a variety of dynamic circumstances and tectonic settings within the strike-slip fault zones. These include pull-aparts in the release area between subparallel faults, push-ups in the jogs where the subparallel faults overlap, and pivotal movements, or rotation, of single faults along the whole fault zone. Each kind of tectonic setting is in itself characteristic, each setting consists of many subtypes, which are controlled chiefly by the geometric parameters of the subparallel faults. One of the most important phenomena revealed in the field work is two different kinds of evolution of strike-slip fault zones: one is the evolution of a zone with a tensile component, which is related to the growth of rock bridges, and the other, of one with a compressional component, which develops by the destruction of rock bridges. In this paper we discuss, on the basis of recent research on four strike-slip fault zones in China, the essential characteristics of strike-slip faults and the possible causes of the observed structural phenomena. Attention is focussed on the deformation, development, and distribution of horizontal displacements within strike-slip fault zones.     

Strain and shear types of the Louzidian ductile shear zone in southern Chifeng, Inner Mongolia, China

The Louzidian ductile shear zone at the south of Chifeng strikes NE-SW and dips SE at low-medium- angles. This ductile shear zone is mainly composed of granitic mylonite, which grades structurally upward into a chloritized zone, a microbreccia zone, a brittle fault and a gouge zone. All these zones share similar planar attitudes, but contain different linear attitudes and kinematic indicators. Finite strain measurements were performed on feldspar porphyroclasts using the Fry method. These meas- urements yield Fulin indexes of 1.25―3.30, Lode's parameters of -0.535―-0.112 and strain parameters of 0.41―0.75 for the protomylonite, respectively. These data are plotted within the apparent constric- tional field in Fulin and Hossack diagrams. In contrast, for the mylonite, corresponding parameters are 0.99―1.43, -0.176―-0.004 and 0.63―0.82, respectively, and located in the apparent constrictional field close to the plane strain. The mean kinematic vorticity numbers of the protomylonite and mylonite by using three methods of polar Mohr circle, porphyroclast hyperbolic and oblique foliation, are in the range of 0.67―0.95, suggesting that the ductile shearing is accommodated by general shearing that is dominated by simple shear. Combination of the finite strain and kinematic vorticity indicates that shear type was lengthening shear and resulted in L-tectonite at the initial stage of deformation and the shear type gradually changed into lengthening-thinning shear and produced L-S-tectonite with the uplifting of the shear zone and accumulating of strain. These kinds of shear types only produce a/ab strain facies, so the lineation in the ductile shear zone could not deflect 90° in the progressively deformation.     

Metamorphic,deformation, fluids and geological significance of low-temperature retrograde mylonites of Diancangshan metamorphic massif along Ailaoshan-Red River strike-slip fault zone,Yunnan, China

Diancangshan metamorphic massif is one of the four metamorphic massifs developed along the Ailaoshan-Red River strike-slip fault zone, Yunnan, China. It has experienced multi-stage metamorphism and deformation, especially since the late Oligocene it widely suffered high-temperature ductile shear deformation and exhumation of the metamorphic rocks from the deep crust to the shallow surface. Based on the previous research and geological field work, this paper presents a detailed study on deformation and metamorphism, and exhumation of deep metamorphic rocks within the Diancangshan metamorphic massif, especially focusing on the low-temperature overprinted retrogression metamorphism and deformation of mylonitic rocks. With the combinated experimental techniques of optical microscope, electron backscatter diffraction attachmented on field-emission scanning electron microscopy and cathodoluminescence, our contribution reports the microstructure, lattice preferred orientations of the deformed minerals, and the changes of mineral composition phases of the superposition low-temperature retrograde mylonites. All these results indicate that: (1) Diancangshan deep metamorphic rock has experienced early high-temperature left-lateral shear deformation and late extension with rapid exhumation, the low-temperature retrogression metamorphism and deformation overprinted the high-temperature metamorphism, and the high-temperature microstructure and texture are in part or entirely altered by subsequent low-temperature shearing; (2) the superposition of low-temperature deformation-metamorphism occurs at the ductile-brittle transition; and (3) the fluid is quite active during the syn-tectonic shearing overprinted low-temperature deformation and metamorphism. The dynamic recrystallization and/or fractures to micro-fractures result in the strongly fine-grained of the main minerals, and present strain localization in micro-domians, such as micro-shear zones in the mylonites. It is often accompanied by the decrease of rock strength and finally influences the rheology of the whole rock during further deformation and exhumation of the Diancangshan massif.     

SEISMIC MODELLING WITH CHANNEL WAVES IN SEAM STRUCTURES INFLUENCED BY MYLONITE ZONES1

Channel waves generated in coal-seams and their reflections from discontinuities are widely used to indicate the tectonic and stratigraphic features of coal deposits, resulting in greater efficiency and safety in coal-mining. In the mining area of Ibbenbüren (F.R.G.) seam structures sometimes contain so-called mylonite zones, which are crushed coal deposits capable of binding gas. If mining hits a mylonite zone this would probably not only reduce output of the mine, but could even cause gas explosions. To investigate the influence of a mylonite zone on the propagation of channel waves, Rayleigh channel wave measurements for 2D analogue models were performed and synthetic seismograms of Love channel waves were calculated. Analogue modelling of the mylonite zone using Rayleigh seam waves within the seam was carried out using a perforation technique. Calculations were made to obtain an estimate of velocity reduction due to perforation. The results agree well with velocity values measured up to a perforation of 25% in a 2D epoxy resin model. Reflected channel wave energy was found by applying dispersion analysis in the case where the impedance reduction between the mylonite seam structure and the undisturbed seam was approximately 5%. The horizontal width of the mylonite structure was detectable from the time lag between reflected channel wave signals from both in-seam borders of the mylonite zone. Resolution of two discrete borders was possible for a width of 1.5 λ's. The influence of a vertical fault, positioned within the mylonite zone, could only poorly be resolved. Numerical model investigations of Love seam waves were concerned mainly with the variation of the horizontal width of the mylonite zone. Mylonite zones with dimensions of the order of 0.4 λ's allow definite statements about their widths from dispersion and spectral analyses. For zones with smaller widths down to 0.2 λ's, it was found that reflectivity and transmissivity analyses give a qualitative criterion for distinguishing a mylonite structure surrounding a fault from a pure fault.     

Sedimentary fill history of the Huicheng Basin in the West Qinling Mountains and associated constraints on Mesozoic intracontinental tectonic evolution

The Qinling Orogenic Belt is divided commonly by the Fengxian-Taibai strike-slip shear zone and the Huicheng Basin into the East and West Qinling mountains,which show significant geological differences after the Indosinian orogeny.The Fengxian-Taibai fault zone and the Meso-Cenozoic Huicheng Basin,situated at the boundary of the East and West Qinling,provide a natural laboratory for tectonic analysis and sedimentological study of intracontinental tectonic evolution of the Qinling Orogenic Belt.In order to explain the dynamic development of the Huicheng Basin and elucidate its post-orogenic tectonic evolution at the junction of the East and West Qinling,we studied the geometry and kinematics of fault zones between the blocks of West Qinling,as well as the sedimentary fill history of the Huicheng Basin.First,we found that after the collisional orogeny in the Late Triassic,post-orogenic extensional collapse occurred in the Early and Middle Jurassic within the Qinling Orogenic Belt,resulting in a series of rift basins.Second,in the Late Jurassic and Early Cretaceous,a NE-SW compressive stress field caused large-scale sinistral strike-slip faults in the Qinling Orogenic Belt,causing intracontinental escape tectonics at the junction of the East and West Qinling,including eastward finite escape of the East Qinling micro-plate and southwest lateral escape of the Bikou Terrane.Meanwhile,the strike-slip-related Early Cretaceous sedimentary basin was formed with a right-order echelon arrangement in sinistral shear zones along the southern margin of the Huicheng fault.Overall during the Mesozoic,the Huicheng Basin and surrounding areas experienced four tectonic evolutionary stages,including extensional rift basin development in the Early and Middle Jurassic,intense compressive uplift in the Late Jurassic,formation of a strike-slip extensional basin in the Early Cretaceous,and compressive uplift in the Late Cretaceous.