Episodic mesozoic volcanism in Namibia and Brazil: A K—Ar Isochron study bearing on the opening of the south atlantic

An attempt is made to find a more objective and precise basis for the correlation of volcanics from southwestern Africa and South America than is possible by frequency diagrams of individual K—Ar ages. This leads to a critical appraisal of conventionally calculated K—Ar ages with the conclusion thata priori assumption regarding the isotopic composition of non-radiogenic argon and, hence, the standard atmospheric correction, are no longer tenable.K—Ar isotoopic data on Mesozoic basalts and dolerites from Namibia and Brazil are presented in terms of an isochron model. Plots for cogenetic rocks are unacceptably scattered on a “radiogenic”⁴⁰Ar vs. K diagram, but show a high degree of collinearity on⁴⁰Ar/³⁶Ar diagrams0K/³⁶Ar diagrams. Using the latter plots, a number of isochrons are generated which indicate that Mesozoic volcanism in these regions occured as several discrete episodes of fairly short duration. Effusion of the extensive Serra Geral basalts of Brazil and the Kaoko basalts of Namibia is shown to have occured simultaneeously at 121 m.y.B.P. Basalts from a series of boreholes along the central Parana Basin, as well as a group of dykes from Sao Paulo, yield isochrons of 128 m.y., which coincides with the postulated onset of separation of Africa and South America based on marine magnetic anomalies. Linear dyke swarms along the Namibian seaboard, interpreted as an expression of the earliest rift phase, have an isochron age of 134 m.y. Sills and dykes, mainly from southern Namibia, with isochron ages of 183 m.y. are considered to be the westernmost manifestation of Stormberg volcanism, not necessarily related to rifting. Most of the igneous suites examined have initial⁴⁰Ar/³⁶Ar ratios significantly different from the modern atmospheric value.     

Intercalibration of international and domestic ~(40)Ar/~(39)Ar dating standards

40Ar/39Ar method is a high precision dating means, of which the age is obtained by contrasting the un- known sample with those of standards. Usually the age of standard is determined by K-Ar method in which the 38Ar spike should be added for measurement. However, the absolute concentration of 38Ar spike is measured through the calibrated standards in turn, al- though occasionally the concentration of 38Ar spike is determined by other dating methods, such as Rb-Sr, U-Pb methods, which is kn…     

Regional-Scale Excess Ar wave in a Barrovian type metamorphic belt, eastern Tibetan Plateau

Laser step heating ⁴⁰Ar/³⁹Ar analysis of biotite and muscovite single crystals from a Barrovian type metamorphic belt in the eastern Tibetan plateau yielded consistent cooling ages of ca. 40 Ma in the sillimanite zone with peak metamorphic temperatures higher than 600°C and discordant ages from 46 to 197 Ma in the zones with lower peak temperatures. Chemical Th‐U‐Total Pb Isochron Method (CHIME) monazite (65 Ma) and sensitive high mass‐resolution ion microprobe (SHRIMP) apatite (67 Ma) dating give the age of peak metamorphism in the sillimanite zone. Moderate amounts of excess Ar shown by biotite grains with ages of 46 to 94 Ma at metamorphic grades up to the high‐grade part of the kyanite zone probably represent incomplete degassing during metamorphism. In contrast, the high‐grade part of the kyanite zone yields biotite ages of 130 to 197 Ma. The spatial distribution of these older ages in the kyanite zone along the sillimanite zone boundary suggests they reflect trapped excess argon that migrated from higher‐grade regions. The most likely source is muscovite that decomposed to form sillimanite. The zone with extreme amounts of excess argon preserves trapped remnants of an ‘excess argon wave’. We suggest this corresponds to the area where biotite cooled below its closure temperature in the presence of an elevated Ar wave. Extreme excess Ar is not recognized in muscovite suggesting that the entrapment of the argon wave by biotite took place when the rocks had cooled down to temperatures lower than the closure temperature of muscovite. The breakdown of phengite during ultrahigh‐pressure (UHP) metamorphism may be a key factor in accounting for the very old apparent ages seen in many UHP metamorphic regions. This is the first documentation of a regional Ar‐wave spatially associated with regional metamorphism. This study also implies that resetting of the Ar isotopic systems in micas can require temperatures up to 600°C; much higher than generally thought.     

The application of isochron diagrams in40Ar-39Ar dating: A discussion

The presence of a non-radiogenic argon component within rocks and minerals at the time of their crystallization (termed initial argon) is now widely recognized. Present data indicate that the³⁶Ar concentration of this initial argon is in the order of 10^?9 cm³/g STP in a wide range of geological materials. In⁴⁰Ar-³⁹Ar analyses the preference for small samples and division of the gas evolved into a number of temperature steps means that the amount of initial³⁶Ar analyzed is often less than the argon extraction line blank. Thus if blank corrections are not made an isochron plot will represent mixing lines between atmospheric argon and the argon derived from the sample. In this case the isochron parameters will probably be in error. Secondary alteration of samples adds atmospheric argon not related to the initial argon present in a rock at the time of its formation and must be eliminated or avoided if the isochron technique is to be used. The inability to obtain isochrons for samples with excess radiogenic argon may be related to significant extraction system contamination. At present the application of the two-error regression technique is being misapplied in determining the quality of fit and in some cases underestimating the error limits assigned to the isochron parameters.     

A 13 ± 3 ka age determination of a tholeiite,Pinacate volcanic field,Mexico, and improved methods for Ar/Ar dating of young basaltic rocks

Among the youngest lava flows of the Pinacate volcanic field, Sonora, Mexico, is a large outpouring of tholeiite, the Ives flow. This tube-fed pahoehoe flow contrasts sharply with other Pinacate lavas in its great volume, alkali-poor composition and morphologic features, which include novel small structures named “spatter tubes.” Despite its K-poor character, young age, and the presence of excess ⁴⁰Ar, we determined a ⁴⁰Ar/³⁹Ar age on samples of this flow at 13 ± 3 ka. Such an age determination is made possible via careful monitoring of the mass discrimination of the mass spectrometer and by stacking results from multiple incremental-heating experiments into a single, composite isochron. This age is among the youngest ever to be determined with such precision by the ⁴⁰Ar/³⁹Ar method on a K-poor tholeiite.     

Geochronology and excess Ar geochemistry of the Lhotse Nup leucogranite, Nepal Himalaya

⁴⁰Ar/³⁹Ar dating experiments on several coexisting minerals from two close-by leucogranite outcrops near Lhotse Nup glacier (Nepal Himalaya) reveal a complex behaviour. Four biotite and muscovite ages cluster around 15.5 Ma, a lower value than literature Rb/Sr ages on splits of the same four micas, suggesting a discrepancy with the ideal cooling age sequence observed in the Alps.A strongly discordant Ar-Ar spectrum on tourmaline does not allow a chronological interpretation.A potassium feldspar shows a slow-cooling staircase spectrum with a superimposed saddle diagnostic of excess Ar. HF leaching removed excess Ar but caused great perturbations to the minimum step ages, isochron plots, and the release of reactor-produced Ar isotopes. The present data require that the currently fashionable interpretations of feldspar systematics be radically changed.The main chronological conclusions rely on the eight mica ages. Their decrease from 18.2 to 15.3 Ma dates the cooling of the Lhotse Nup leucogranite.     

一种新的K-Ar和40Ar-30Ar等时线

通过理论推导，提出了一种新的K-Ar、40Ar-39Ar等时线：40Ar/40K-36Ar/40K、40Ar/39Ar－36Ar/40Ar等时线。通过实例证明它与其它等时线方法可以进行相互检验。在一些不能利用其它等时线方法的情况下，新的40Ar/40K－36Ar/40K和40Ar/39Ar－36Ar/40Ar等时线方法可以充分显示它的使用价值和存在意义。     

Intercalibration of international and domestic 40Ar/39Ar dating standards

Four international standards, Ga1550, MMhb-1, Lp-6, Bem 4M, and one domestic standard BT-1 have been intercalibrated. The repeated measurements on MMhb-1 with different mass demonstrate that MMhb-1 is inhomogeneous in age and its average age is 519.8 Ma. The results of Bern 4M and Lp-6 reflect that they have an invariable value of ⁴⁰Ar*/³⁹Ar_k (F) and the ages we obtained are consensus with their K-Ar age: Lp-6=127.7Ma; Bern 4M=18.2 Ma. Analyses of BT-1 age spectra, Ca/K and Cl/K spectra as well as inverse isochrons indicate that the sample is homogeneous and invariable and keeps close chemically, with its trapped argon isotope composition close to the atmosphere. The dating results show that age values are reproducible and steady, total fusion age, step-heating age, plateau age and isochron age are in accord with each other within the error range (2σ). Therefore, we recommend 28.7 Ma as the calibrated age of BT-1. We also discuss the variation in neutron flux gradients of Beijing 49-2 reactor. It was found that the neutron flux gradient varies considerably, and more monitors (standard samples) are needed to fix the trend of variation. The coefficient of the 49-2 reactor that transfers the ratio of production rate of ³⁷Ar_Ca/³⁹Ar_K into Ca/K ratio is 1.78. This is different from that reported earlier, 2.0, which may be caused by the reconstruction of the reactor.     

The isotopic composition of atmospheric argon and 40Ar/39Ar geochronology: Time for a change?

A redetermination of the isotopic composition of atmospheric argon by Lee, J.-Y., Marti, K., Severinghaus, J.P., Kawamura, K., Yoo, H.-S., Lee, J.B., Kim, J.S. [2006. A redetermination of the isotopic abundances of atmospheric Ar. Geochimica et Cosmochimica Acta 70, 4507–4512] represents the first refinement since the work of Nier [1950. A redetermination of the relative abundances of the isotopes of carbon, nitrogen, oxygen, argon, and potassium. Physical Reviews 77, 789–793]. The new ⁴⁰Ar:³⁸Ar:³⁶Ar proportions imply <1% adjustments to ⁴⁰Ar/³⁹Ar ages in all but exceptional cases of very young and/or K-poor and/or Ca-rich samples, or cases in which samples are grossly under- or over-irradiated. Analytical protocols employing atmospheric argon to determine mass discrimination corrections are insensitive to the effects of revision on the air correction, but are subject to non-negligible adjustments arising from expanded heavy to light isotope ratios attending the increased mass discrimination correction. The competing effects of increased ⁴⁰Ar/³⁹Ar and ⁴⁰Ar/³⁷Ar ratios render the adjustments a function of sample chemistry and neutron irradiation parameters. The improved precision of atmospheric ⁴⁰Ar/³⁶Ar and ³⁸Ar/³⁶Ar permits increasingly sensitive detection of departures from atmospheric values. Non-atmospheric initial ⁴⁰Ar/³⁶Ar values are increasingly well-documented in volcanic materials, including subatmospheric values correlated with ³⁸Ar/³⁶Ar in a trend consistent with kinetic mass fractionation whereby incomplete equilibration between magma and atmosphere favors light isotope enrichment in the magma. The detailed mechanism(s) of such fractionation are unclear and must be clarified by further study. A detectable increase in atmospheric ⁴⁰Ar/³⁶Ar in the past 800 ka [Bender, M.L., Barnett, B., Dreyfus, G., Jouzel, J., Porcelli, D., 2008. The contemporary degassing rate of ⁴⁰Ar from the Earth. Proceedings of the National Academy of Sciences 105, 8232–8237] suggests that ages of late Quaternary (e.g., <100 ka) materials incorporating large amounts of atmospheric argon such as biotite may be underestimated by as much as 100% if a modern atmospheric ⁴⁰Ar/³⁶Ar value is erroneously assumed, unless air argon is used to determine mass discrimination. Further evaluation of the evolution of paleoatmospheric ⁴⁰Ar/³⁶Ar, and the fidelity with which argon trapped in igneous materials reflects this, would be very productive. The use of isochrons rather than model (e.g., plateau) ages mitigates the vagaries associated with uncertain trapped argon isotope ratios, and the importance of strategies to derive statistically valid isochrons is underscored.     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

一种新的K-Ar和~(40)Ar-~(39)Ar等时线——~(40)Ar/~(40)K-~(36)Ar/~(40)K和~(40)Ar/~(39)Ar-~(36)Ar/~(39)Ar等时线

通过理论推导 ,提出了一种新的K -Ar、4 0 Ar - 39Ar等时线 :4 0 Ar/ 40 K - 36Ar/ 40 K、4 0 Ar/ 39Ar - 36Ar/ 39Ar等时线。通过实例证明它与其它等时线方法可以进行相互检验。在一些不能利用其它等时线方法的情况下 ,新的4 0 Ar/ 40 K - 36Ar/ 40 K和4 0 Ar/ 39Ar- 36Ar/ 39Ar等时线方法可以充分显示它的使用价值和存在意义     

The evolution of excess argon in alpine biotites — A40Ar-39Ar analysis

Alpine biotites containing excess⁴⁰Ar have been analysed by step-heating argon analysis of both neutron irradiated and unirradiated samples. In addition to age spectra the data are discussed in terms of the thermal release of⁴⁰Ar,³⁹Ar,³⁷Ar and³⁶Ar and also displayed on a correlation plot of³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar which is used to interpret the data and present a model of isotopic evolution during metamorphic cooling. This diagram overcomes misleading complications of isochron plots. The samples exhibit the following argon systematics: (1) flat age spectra for 80–90%³⁹Ar release with anomalously old ages but early gas fractions that approximate the accepted cooling ages; (2) each sample shows decreasing³⁶Ar/⁴⁰Ar with increasing temperature of heating step with three samples having a negative correlation of³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar and one a positive correlation; (3) there appear to be two³⁶Ar components, one released at high temperatures and correlated with radiogenic⁴⁰Ar and one released at low temperatures which is not correlated with radiogenic⁴⁰Ar; and (4) there is no significant effect of neutron irradiation on the release of⁴⁰Ar and³⁶Ar.Interpretation suggests that these biotites contain a record of the evolution and isotopic composition of ambient argon retained within the metamorphic host rocks during cooling. After incorporation of argon of high⁴⁰Ar/³⁶Ar another argon component, of atmospheric composition, was retained at lower temperature and argon partial pressures.     

40Ar/39Ar geochronology and exhumation of mylonitized metamorphic complex in Changle-Nanao ductile shear zone

New⁴⁰Ar/³⁹Ar plateau ages from rocks of Changle-Nanao ductile shear zone are 107.9 Ma(Mus), 108.2 Ma(Bi), 107.1 Ma(Bi), 109.2 Ma(Hb) and 117.9 Ma(Bi) respectively, which are concordant with their isochron ages and record the formation age of the ductile shear zone. The similarity and apparent overlap of the cooling ages with respective closure temperatures of 5 minerals document initial rapid uplift during 107–118 Ma following the collision between the Min-Tai microcontinent and the Min-Zhe Mesozoic volcanic arc. The⁴⁰Ar/³⁹ Ar plateau ages, K-Ar date of K-feldspar and other geochronologic information suggest that the exhumation rate of the ductile shear zone is about 0.18–1.12 mm/a in the range of 107–70 Ma, which is mainly influenced by tectonic extension.     

Ar–Ar age and thermal history of martian dunite NWA 2737

We report an ³⁹Ar–⁴⁰Ar age determination of a whole rock sample of the olivine-rich, martian meteorite Northwest Africa (NWA) 2737. Those extractions releasing 0–48% of the ³⁹Ar define an ³⁹Ar–⁴⁰Ar isochron age of 160–190 Ma, when evaluated in various ways. Higher temperature extractions show increasing ages that eventually exceed the reported Sm–Nd age of 1.42 Ga. At least part of this excess ⁴⁰Ar may have been shock implanted from the martian atmosphere. We considered two possible interpretations of the Ar–Ar isochron age, utilizing the measured Ar diffusion characteristics of NWA 2737 and a thermal model, which relates Ar diffusion to the size of a cooling object after shock heating. One interpretation, that ⁴⁰Ar was only partially degassed by an impact event ~ 11 Ma ago (the CRE age), appears possible only if NWA 2737 was shock-heated to temperatures > 600 °C and was ejected from Mars as an object a few 10 s of cm in diameter. The second interpretation, which we prefer, is that NWA experienced an earlier, more intense shock event, which left it residing in a warm ejecta layer, and a less intense event ~ 11 Ma ago, which ejected it into space. Our evaluation would require NWA 2737 to have been heated by this first event to a temperature of ~ 300–500 °C and buried in ejecta to a depth of ~ 1–20 m. These conclusions are compared to model constraints on meteorite ejection from Mars reported in the literature. The second, Mars-ejection impact ~ 11 Ma ago probably heated NWA 2737 to no more than ~ 400 °C. NWA 2737 demonstrates that some martian meteorites probably experienced shock heating in events that did not eject them into space.     

KAr isochron study of the Tudor Gabbro,Grenville Province,Ontario

Ten whole-rock samples from the Tudor Gabbro, Grenville Province, Ontario, Canada have been dated by the KAr method. The ages calculated by the conventional method range from 900 m.y. to 2040 m.y. On an isochron plot, three samples from a sampling site near the northern border of the gabbro lie along a 670-m.y. isochron with an initial⁴⁰Ar/³⁶Ar ratio of about 17,300 whereas all other samples lie along another 670-m.y. isochron with an initial ratio of about 5000. Although it is not certain yet as to what geological event the isochron age represents, the results clearly demonstrate that the effect of initial argon can be significant even on old samples such as these.     

Archaeological age constraints from extrusion ages of obsidian: Examples from the Middle Awash,Ethiopia

Extrusion ages of archaeological obsidian, especially as determined by the ⁴⁰Ar/³⁹Ar method, can provide reliable maximum ages for tool manufacture. In at least one case in the Middle Awash of Ethiopia, freshly extruded obsidian was used for tool making, resulting in useful maximum ages for site occupation. Hydration resulting in mobility of K and/or Ar in glass, and recoil artifacts produced by neutron irradiation, fatally affect most glass shards from volcanic ashes. The much lower surface area to volume ratio of most archaeological obsidian, however, indicates that the affected areas can be manually removed prior to analysis and the recoil and hydration problems can be easily overcome. A more important issue in dating obsidian is that of possible mass-dependent kinetic isotope fractionation during or subsequent to quenching of volcanic glasses. This is evidenced in some cases by sub-atmospheric initial ⁴⁰Ar/³⁶Ar ratios, and more generally in sub-atmospheric ³⁸Ar/³⁶Ar. Resulting bias can be avoided through the use of isochron ages, which do not entail the assumption of an initial value of ⁴⁰Ar/³⁶Ar as is required for plateau ages. Since step heating of glasses often yields limited variability in ⁴⁰Ar:³⁹Ar:³⁶Ar (and therefore little spread on isochrons), another approach is to use an average value for initial ⁴⁰Ar/³⁶Ar, with concomitantly larger uncertainty than is associated with atmospheric ⁴⁰Ar/³⁶Ar, when calculating a plateau age. The ³⁸Ar/³⁶Ar of an un-irradiated subset of our samples validates the inference of kinetic fractionation, and potentially provides a basis for determining initial ⁴⁰Ar/³⁶Ar in samples that fail to yield isochrons, but only in samples lacking magmatic excess ⁴⁰Ar. These approaches allow us to reliably apply the ⁴⁰Ar/³⁹Ar method to volcanic glasses, which has resulted in maximum ages for archaeological sites that are not amenable to traditional geochronological methods. ⁴⁰Ar/³⁹Ar geochronology can also provide information on the geological provenance of the raw material used for tool making, especially when combined with geochemical data.     

Temperature and pressure effects on40Ar39Ar systematics

The effects of thermal and compressional treatment on⁴⁰Ar-³⁹Ar systematics have been investigated on three artificially heated biotite samples (heated for 1 hour at 700°C and 860°C in air and 700°C in vacuum respectively) and uniaxially compressed granite (p = 1400bar) and basalt samples (p = 1650bar). The⁴⁰Ar-³⁹Ar results for the disturbed samples are compared with those for undisturbed samples. Except for the vacuum-heating case, the effects of the disturbances may be interpreted as the combined effect of a partial loss of radiogenic⁴⁰Ar from the sample and an incorporation of air Ar into the sample. Common diagnostic effects are (1) reduction of the total fusion age, (2) distortion of the age spectrum and, if the degree of the partial Ar loss is small, (3) approximate preservation of the isochron age, and (4) reduction of the intercept value (⁴⁰Ar/³⁶Ar) in the isochron plot.The features observed in the age spectra of artificially disturbed samples are rather common in geologically disturbed samples, suggesting that the artificial disturbances simulate the effects of geological disturbances on⁴⁰Ar-³⁹Ar systematics.     

40Ar/39Ar incremental-release ages of biotite from a progressively remetamorphosed Archean basement terrane in southwestern Labrador

Gneisses within an Archean basement terrane adjacent to the southwestern portion of the Labrador Trough were variably retrograded during a regional metamorphism of Grenville age (ca. 1000 Ma). Biotites from non-retrograded segments of the gneiss terrane record⁴⁰Ar/³⁹Ar plateau and isochron ages which date times of cooling following an episode of the Kenoran orogeny (2376–2391 Ma). A suite of gneiss samples displaying varying degrees of retrograde alteration was collected across the Grenville metamorphic gradient. Biotites in these samples show no petrographic evidence of retrograde alteration, however they do record internally discordant⁴⁰Ar/³⁹Ar age spectra. Although the extent of internal discordance is variable, the overall character of the release patterns is similar with younger apparent ages recorded in intermediate-temperature gas fractions. The total-gas dates range from 2257±27 Ma (northwest) to 1751±23 Ma (southeast), suggesting that variable quantities of radiogenic argon were lost from the Archean biotites during Grenville metamorphism. The “saddle-shaped” nature of the discordant spectra indicates that argon loss was not accomplished through single-stage, volume diffusion processes.Biotites in portions of the gneiss terrane which were completely recrystallized during Grenville metamorphism are petrographically and texturally distinct. A representative of this phase records a⁴⁰Ar/³⁹Ar plateau age of 2674±28 Ma. This date is markedly inconsistent with regional constraints on the timing of Grenville metamorphism, and indicates the presence of extraneous argon components. Both the extraneous and radiogenic argon components must have been liberated in constant proportions during experimental heating because the argon isotopic data yield a well-defined⁴⁰Ar/³⁶Ar vs.³⁹Ar/³⁶Ar isochron corresponding to an age (2658±23 Ma) similar to that defined by the plateau portion of the spectrum.The⁴⁰Ar/³⁹Ar biotite dates suggest that the effects of Grenville metamorphism extent 15–20 km northward into the Superior Province. The limit of this overprint is approximately coincident with the northernmost development of Grenville age thrust faults in the Archean terrane. Therefore, it is proposed that the northern margin of the Grenville Province in southwestern Labrador should be located along the northernmost Grenville thrust fault because this represents both a structural and a thermal discontinuity.     

Multi-method approach to dating glass: The case of Basiluzzo Islet (Aeolian archipelago,Italy)

A rhyolitic lava flow from Basiluzzo islet (Aeolian Islands), has been analysed with the Fission tracks (FT) and ⁴⁰Ar–³⁹Ar methods on glass, and with the U/Th method on whole rock to constrain its age and to compare the behaviour of different dating methodologies on glass samples late Quaternary in age. Laser ⁴⁰Ar–³⁹Ar total fusion analyses were performed on populations of grains. Due to the low yields of radiogenic ⁴⁰Ar the age data are characterised by very high errors. The weighted average of the ages of the whole population is 55.7 ± 8.7 ka (MSWD = 0.7). The isochron age calculated on all points is 40.6 ± 11.4 ka (MSWD = 0.6), with an initial ⁴⁰Ar/³⁶Ar ratio of 297.8 ± 1.8; the isochron is characterised by very little spread among points. The procedure named ‘point-counting technique’ was adopted in FT dating. Spontaneous track mean size resulted reduced by around 20% compared to induced tracks, which indicates that the determined FT age, 28.6 ± 3.6 ka, is a reduced age, due to a certain amount of track annealing. For this reason the plateau technique for correcting thermally lowered ages was applied. We determined a plateau age (commonly assumed as a reliable estimate of the glass formation age) of 43.4 ± 7.1 ka. Four sub-samples of whole rock from Basiluzzo lava flow have been analysed using U/Th isochron method. The ²³⁸U/²³²Th and ²³⁰Th/²³²Th activity ratios of sub-samples have been determined by alpha counting and plotted on an isochron diagram. The resulting age is 46 ± 8 ka and the ²³⁴U/²³⁸U activity ratios are always close to one, demonstrating that no significant processes of alteration have occurred. The relatively high error associated with the age is due to a low fractionation of U/Th ratio in the analysed whole rocks. The ages obtained with different methods, 43.4 ± 7.1 ka (FT plateau age), 40.6 ± 11.4 ka (⁴⁰Ar–³⁹Ar isochron age of all grains), and 46 ± 8 ka (U/Th isochron) agree at the 1σ level, excluding a Holocene age for this sample. This could be valuable information for the Department of Civil Protection because it seems to mitigate the potential risk for present volcanic activity in the area. All ages are affected by very high analytical errors, which are due to the characteristics of the material analysed. Young ages result in low tracks numbers (FT dating) and barely detectable amounts of radiogenic ⁴⁰Ar in the presence of high atmospheric contamination (⁴⁰Ar–³⁹Ar dating). Stratigraphic successions without strict chronologic constraints might however benefit even from age data with low precision.     

40Ar-39Ar age determinations on the Owyhee basalt of the Columbia Plateau

⁴⁰Ar/³⁹Ar step-heating analyses have been performed on 11 samples of basalt from sites near Owyhee Reservoir of southeastern Oregon, U.S.A. These rocks were extruded during the great flood basalt episode of the Pacific Northwest. The whole-rock points are highly correlated on a plot of⁴⁰Ar/³⁶Ar versus³⁹Ar/³⁶Ar, corresponding to a common age of the samples of 14.3 ± 0.3 m.y. Inspite of this, individual “plateau” plots of the age versus fraction of³⁹Ar released do not give good plateaux. These age spectra exhibit to varying degrees a common structure in which lower age values are found at higher temperatures. This pattern may result from a closed-system redistribution of the argon isotopes. The usefulness of grinding the basalts in removing a loosely held atmospheric argon component is confirmed.