弹性液舱内液体晃荡实验研究

通过物理模型实验,对水平简谐激励下弹性矩形液舱内液体晃荡问题进行了研究。实验中给出了不同液深和不同激励振幅下弹性液舱内液体最低阶固有频率。采用影像采集与分析系统获得液舱内自由液面的形状和高度,通过压力采集系统得到舱壁上的压力分布。实验中分析了不同液深、不同激励频率下弹性和刚性液舱内自由液面高度和晃荡压力的变化特性。比较了弹性和刚性液舱内不同位置处自由液面高度随外界激励频率的变化规律,以及舱壁上不同位置处的压力峰值随外界激励频率的变化规律。结果表明:非共振情况下,弹性和刚性实验结果及理论值三者的波高和压力较为接近。共振情况下,弹性和刚性波高基本相等,在近舱壁处二者明显大于理论值,而在远离舱壁处二者与理论值存在一定差别;弹性压力较刚性压力略小,但二者与理论值差别较大。     

三维弹性侧壁液舱内液体晃动波面的实验研究

通过物理模型实验,对弹性侧壁液舱和刚性液舱内液体晃荡问题进行了研究。由于流固耦合的影响,弹性侧壁液舱内液体晃荡的最低阶固有频率稍小于同尺寸的刚性液舱内液体晃荡的最低阶固有频率。液舱模型处于纵向简谐激励作用下,其中激励频率在最低阶固有频率附近。实验分析两种相对液深比h/L=0.167和h/L=0.333,在二阶模态的次共振和一阶模态的共振状况下,对弹性侧壁液舱与刚性液舱内不同测点的波面、振幅谱和晃动波高进行对比分析。结果表明:在浅液深(h/L=0.167)一阶共振下,流固耦合对波面形态的影响比较明显,弹性侧壁液舱内测点晃动波高明显大于刚性液舱内对应测点波高;而在一般液深(h/L=0.333)一阶共振下,水弹性效应减弱,弹性侧壁液舱与刚性液舱内对应测点处波高差异较小。     

The effects of LNG-tank sloshing on the global motions of LNG carriers

The coupling and interactions between ship motion and inner-tank sloshing are investigated by a time-domain simulation scheme. For the time-domain simulation, the hydrodynamic coefficients and wave forces are obtained by a potential-thoery-based three-dimensional (3D) diffraction/radiation panel program in frequency domain. Then, the corresponding simulations of motions in time domain are carried out using convolution integral. The liquid sloshing in a tank is simulated in time domain by a Navier–Stokes solver. A finite difference method with SURF scheme is applied for the direct simulation of liquid sloshing. The computed sloshing force and moment are then applied as external excitations to the ship motion. The calculated ship motion is in turn inputted as the excitation for liquid sloshing, which is repeated for the ensuing time steps. For comparison, we independently developed a coupling scheme in the frequency domain using a sloshing code based on the linear potential theory. The hydrodynamic coefficients of the inner tanks are also obtained by a 3D panel program. The developed schemes are applied to a barge-type FPSO hull equipped with two partially filled tanks. The time-domain simulation results show similar trend when compared with MARIN's experimental results. The most pronounced coupling effects are the shift or split of peak-motion frequencies. It is also found that the pattern of coupling effects between vessel motion and liquid sloshing appreciably changes with filling level. The independent frequency-domain coupled analysis also shows the observed phenomena.     

Experimental Studies on Sloshing Mitigation Using Dual Perforated Floating Plates in A Rectangular Tank

The performance of dual perforated floating plates in a rectangular tank is investigated based on the model tests under different external excitations for different filling rates.It is found that dual perforated floating plates in the tank can remarkably mitigate violent resonant sloshing responses compared with the clean tank,especially when the external excitation frequency is in the vicinity of the first-order resonant frequency.Next,the parametric studies based on different filling rates and external excitation amplitudes are performed for the first-order resonant frequencies.The presence of dual perforated floating plates seldom shifts the sloshing natural frequencies.Further,dual perforated floating plates change the sloshing modes from the standing-wave mode in the clean tank to the Utube mode,which can arise from the sloshing reduction to some extent.     

Boundary element analysis of liquid sloshing characteristics in axisymmetric tanks with various porous baffles

This paper aims to investigate the effects of the porous baffles on the suppression of sloshing for the tanks with axisymmetric geometries under lateral excitation. Based on the assumptions of inviscid, irrotational, incompressible liquid and small amplitude sloshing, an axisymmetric boundary element method (BEM) for 3D Laplace equation is derived by using the Green's theorem together with the weighted residual method. And a zoning method is employed to model fluid domain in the tanks with complex porous baffles. Meanwhile, the porous baffles are treated motioning together with the tanks, and the velocity across the porous baffle is assumed to be linearly proportional to the pressure gradient between each side of the porous baffle. And the mechanism of suppressing the sloshing response is mainly the energy dissipation of the fluid passing through the porous baffle. Moreover, the linear free surface boundary conditions are also used to solve the governing equations. Compared with other numerical methods, the most prominent advantage of the BEM in solving axisymmetric potential problem is that only the boundaries of half the cross-section instead of the entire problem domain should be discretized, which can cut down large amount of memory and time costs. The present method is verified by comparing the numerical results with the existing literatures, and excellent agreements are obtained. Meanwhile, the proposed models are applied to investigate the effects of the porous baffles on sloshing response in circular cylindrical, annular cylindrical and conical tanks. The effects of the porous baffle length, porous-effect parameter, installation angle and baffle height on the sloshing force, natural frequency and surface elevation are studied. Additionally, some typical sloshing pressure distributions, velocity potential contours and velocity fields are plotted. The results show that swirls at the tips of the baffles can be observed in many cases, and the top-mounted porous baffle makes more significant suppression effects on sloshing response than that of bottom-mounted porous baffle, while increasing the number of ring porous baffles can achieve better restraint effects on sloshing response. And increasing the baffle length of the horizontal wall-mounted ring porous baffle can significantly decrease the sloshing frequencies, as well as the first non-dimensional natural frequency decreases with decrease in porous-effect parameter of the coaxial porous baffle. In addition, remarkable effects on sloshing can be obtained when reasonable designed by selecting the optimal porous-effect parameter, installation angle and baffle height. And this paper can be a useful guide for the seismic design and analysis of many actual liquid storage tanks (such as the Advanced Passive PWR, large water cooling tower, etc.).     

A probabilistic assessment of design sloshing pressure time histories in LNG tanks

The violent motion (sloshing) of liquefied natural gas (LNG) in cargo tanks has attracted significant attention. Transformations of the LNG market have led to the increased transport of LNG in partially filled tanks, but established technology is mainly based on engineering experience with completely filled containers. This paper investigates a large sample of sloshing pressure measurements. It focuses on the magnitude of individual sloshing impact events, and their associated temporal and spatial patterns. The durations of these impacts are comparable to the natural frequency of an LNG container wall, so the details of their time histories are important in determining the structural response. Experiments are performed on tanks with high (92.5%) and low (30%) filling levels, for various wave headings. The common post-processing approach of representing impact pressure histories by a triangular profile is studied, and an alternative approach is presented. Two statistical models are used to describe the distribution of maximal pressures in sloshing impacts: a three-parameter Weibull model and a generalized Pareto model. The latter is found to be of questionable utility due to small sample sizes. It is observed that for low filling levels the sloshing impacts are of greater magnitude, having longer durations, smaller ratios of rise time to duration, and larger spatial extents. All these factors should in principle increase the structural response.     

On the analysis of sloshing of water in rectangular containers: Numerical study and experimental validation

In this work the analysis of sloshing of water in rectangular open tanks has been extensively carried out. Two mathematical models are employed, respectively the Reynolds Averaged Navier Stokes Equations (RANSE) and the Shallow Water Equations (SWE). The RANSE are solved using a modified form of the well established MAC method (SIMAC) able to treat both the free surface motion and the viscous stresses over the rigid walls accurately. The Shallow Water Equations are solved by means of a simple and powerful algorithm (CE-SE) able to deal with large impacting waves over the tank walls.Successively, in order to validate the mentioned algorithms and for a better understanding of the sloshing phenomenon, experimental tests have been carried out using a 0.5 m breadth rectangular tank in periodic roll motion.It has been shown that RANSE provide more accurate solutions than SWE for small or moderate amplitudes of excitation. In particular in this paper it is proved that the shallow water approximation can be efficiently adopted within liquid depth to tank breadth RATIO = 0.15, when examining the sloshing problem. By increasing the water level inside the tank, results by SWE show large qualitative and quantitative disagreement with experiments. Nevertheless, in the case of large amplitude excitation, when sprays and large breaking waves are expected, SWE provide a fairly good estimate of the sloshing induced waves.Finally a simple baffle configuration inside the tank has been considered. By the analysis of numerical results, it has been observed that the presence of a vertical baffle at the middle of the tank dramatically changes the sloshing response compared to the unbaffled configuration. It produces a jump-like effect, resulting in a weak magnification of the dynamic loads on the vertical walls out of resonance, and a strong reduction of the dynamic loads in the resonance condition.     

液舱三维晃荡运动二阶共振理论解及特性分析

从无旋运动的理论出发,并利用微扰法,推导了液舱三维晃荡运动二阶共振问题的理论解。考虑纵荡和横荡运动情况,对液舱三维晃荡二阶共振问题进行了分析。当两个晃荡方向的和频(即其外部激发频率的和)或差频(即其外部激发频率的差值)等于液舱固有频率时,二阶共振发生;当某一晃荡方向(横荡或纵荡)外部激发频率与另一晃荡方向(纵荡或横荡方向)液舱某一固有频率的和或差值等于液舱另一固有频率时,二阶共振也会发生。进一步研究了各个二阶共振激发频率下水深变化对晃荡振幅的影响。结果表明,对于两个晃荡方向外部激发频率的和频和单一晃荡方向(纵荡或横荡)某一个激发频率与另一晃荡方向(横荡或纵荡)某一个属于奇模的固有频率的和频所引发的共振情况,水深变化对共振振幅大小的影响比较大;而对于相应差频所引发的共振情况,水深变化对共振振幅大小的影响比较小。     

Effect of liquid storage tanks on the dynamic response of offshore platforms

The sloshing of liquids in storage tanks on fixed offshore structures affects both the natural frequencies and damping. Analytic procedures by which one may account for these effects are presented. Also shown is a method for design of tankage that will result in suppression of dynamic response at the fundamental flexural natural frequency of the structure. An important aspect is that no new equipment is required but only optimum configuration of tankage that is already required for storage of water, fuel, mud or crude oil. Supporting data from full scale field studies are presented.     

Study on coupling effects of ship motion and sloshing

This study considers the coupling effects of ship motion and sloshing. The linear ship motion is solved using an impulse-response-function (IRF) method, while the nonlinear sloshing flow is simulated using a finite-difference method. The IRF method requires the frequency-domain solution prior to conversion to time domain, but the computational effort is much less than that of direct time-domain approaches. The developed scheme is verified by comparing the motion RAOs between the frequency-domain solution and the solution obtained by the IRF method. Furthermore, a soft-spring concept and linear roll damping are implemented to predict more realistic motions of surge, sway, yaw, and roll. For the simulation of sloshing flow in liquid tanks, a physics-based numerical approach adopted by Kim [2001. Numerical simulation of sloshing flows with impact load. Applied Ocean Research 23, 53–62] and Kim et al. [2004. Numerical study on slosh-induced impact pressures on three-dimensional prismatic tanks. Applied Ocean Research 26, 213–226] is applied. In particular, the present method focuses on the simulation of the global motion of sloshing flow, ignoring some local phenomena. The sloshing-induced forces and moments are added to wave-excitation forces and moments, and then the corresponding body motion is obtained. The developed schemes are applied for two problems: the sway motion of a box-type barge with rectangular tanks and the roll motion of a modified S175 hull with rectangular anti-rolling tank. Motion RAOs are compared with existing results, showing fair agreement. It is found that the nonlinearity of sloshing flow is very important in coupling analysis. Due to the nonlinearity of sloshing flow, ship motion shows a strong sensitivity to wave slope.     

The air–water sloshing problem: Fundamental analysis and parametric studies on excitation and fill levels

The problem of liquid sloshing has gained recent attention with the proliferation of liquefied natural gas (LNG) carriers transporting liquids in partially filled tanks. Impact pressures caused by sloshing depend on the tank fill level, period and amplitude of oscillation of the tank. In this paper, we first present the rudiments of a linear potential theory for sloshing motions in a two-dimensional rectangular tank, due to small amplitude sway motions. Although this topic is fundamental, we clarify inconsistencies in the published literature and texts.Numerical investigations were carried out on the sloshing motions in a two-dimensional tank in the sway excitation. The fluid domain was modeled using a finite volume approximation, and the air–water interface was tracked using a volume-of-fluid (VOF) technique. Computational results for free surface elevation and impact pressure are found to be in good agreement with theory and published data. The fill levels were varied from 10% to 95%, and the excitation time periods were varied from 0.8 to 2.8 s for a constant sway amplitude of 0.25 m (peak–peak) at 1:30 scale. The results of the parametric study are compared with theoretical predictions and suggestions are made on incorporating sloshing effects in standard seakeeping analysis for LNG carriers.     

Coupled analysis of nonlinear sloshing and ship motions

A coupled numerical model considering nonlinear sloshing flows and the linear ship motions has been developed based on a boundary element method. Hydrodynamic performances of a tank containing internal fluid under regular wave excitations in sway are investigated by the present time-domain simulation model and comparative model tests. The numerical model features well the hydrodynamic performance of a tank and its internal sloshing flows obtained from the experiments. In particular, the numerical simulations of the strong nonlinear sloshing flows at the natural frequency have been validated. The influence of the excitation wave height and wave frequency on ship motions and internal sloshing has been investigated. The magnitude of the internal sloshing increases nonlinearly as the wave excitation increases. It is observed that the asymmetry of the internal sloshing relative to still water surface becomes more pronounced at higher wave excitation. The internal sloshing-induced wave elevation is found to be amplitude-modulated. The frequency of the amplitude modulation envelope is determined by the difference between the incident wave frequency and the natural frequency of the internal sloshing. Furthermore, the coupling mechanism between ship motions and internal sloshing is discussed.     

Finite element analysis of two-dimensional nonlinear sloshing problems in random excitations

A two-dimensional nonlinear random sloshing problem is analyzed by the fully nonlinear wave velocity potential theory based on the finite element method. A rectangular container filled with liquid subjected to specified horizontal random oscillations is studied. Both wave elevation and hydrodynamic force are obtained. The spectra of random waves and forces have also been investigated, and the effects of the peak frequencies and spectral width of the specified spectrum used for the generation of the random oscillations are discussed. It is found that the energy mainly concentrates at the natural frequencies of the container and is dominant at the ith order natural frequency when the peak frequency is close to the ith order natural frequency. Some results are compared between the fully nonlinear solutions, the linear solutions and the linear plus second-order solutions.     

Experimental Study on A Sloshing Mitigation Concept Using Floating Layers of Solid Foam Elements

A sloshing mitigation concept taking advantage of floating layers of solid foam elements is proposed in the present study. Physical experiments are carried out in a liquid tank to investigate the hydrodynamic mechanism of this concept. Effects of the foam-layer thickness, excitation amplitude, and excitation frequency on the sloshing properties are analyzed in detail. It is found that the floating layers of solid foam elements do not evidently affect the fundamental natural sloshing frequency of the liquid tank evidently among the considered cases. At the resonant condition, the maximum wave height and dynamic pressure are greatly reduced as the foam-layer thickness increases. Higher-order pressure components on the tank side gradually vanish with the increase of the foam-layer thickness. Cases with different excitation amplitudes are also analyzed. The phenomenon is observed when the wave breaking in the tank can be suppressed by solid foam elements.     

Effects of perforated baffle on reducing sloshing in rectangular tank: Experimental and numerical study

A liquid sloshing experimental rig driven by a wave-maker is designed and built to study liquid sloshing problems in a rectangular liquid tank with perforated baffle. A series of experiments are conducted in this experimental rig to estimate the free surface fluctuation and pressure distribution by changing external excitation frequency of the shaking table. An in-house CFD code is also used in this study to simulate the liquid sloshing in three-dimensional （3D） rectangular tank with perforated baffle. Good agreements of free surface elevation and pressure between the numerical results and the experimental data are obtained and presented. Spectral analysis of the time history of free surface elevation is conducted by using the fast Fourier transformation.     

A modal approach to second-order analysis of sloshing using boundary element method

This paper aims at developing a modal approach for the non-linear analysis of sloshing in an arbitrary-shape tank under both horizontal and vertical excitations. For this purpose, the perturbation technique is employed and the potential flow is adopted as the liquid sloshing model. The first- and second-order kinematic and dynamic boundary conditions of the liquid-free surface are used along with a boundary element model which is formulated in terms of the velocity potential of the liquid-free surface. The boundary element model is used to determine the natural mode shapes of sloshing and their corresponding frequencies. Using the modal analysis technique, a non-linear model is presented for the calculation of the first- and second-order potential which can be used to obtain a reduced-order model for the sloshing dynamics. The results of the presented model are verified with the analytical solution for the second-order analysis of sloshing in a rectangular tank and very good results were obtained. Also, the second-order sloshing in some other example tanks with complex bed shapes is studied. The second-order resonance conditions of liquid sloshing in the example tanks are investigated and some conclusions are drawn.     

考虑晃荡效应的独立B型LNG液舱结构多目标优化

独立B型LNG液舱内部设置舱壁板材及多种桁材,有效缓解了液舱晃荡效应。针对晃荡载荷下的独立B型LNG液舱结构多目标优化,利用规范中的公式计算晃荡载荷,并引入液舱晃荡系数,以期综合反映液舱内部构件对晃荡特性的影响,在此基础上进一步建立以液舱结构重量和液舱晃荡系数为目标的多目标优化模型,采用多目标遗传算法(NCGA),计算得到改进的独立B型LNG液舱结构设计方案。     

容器固有频率对液体晃荡的影响

针对矩形容器内液体晃荡问题,采用了时域高阶边界元方法建立自由水面满足完全非线性边界条件的数学模型。求解中采用混合欧拉-拉格朗日方法追踪流体瞬时水面,运用四阶龙格库塔方法更新下一时间步的波面和速度势。通过将计算得到的波面结果与实验数据、解析解和已发表结果对比,吻合良好,验证了本方法的准确性。进而采用谱分析方法分析了波面时间历程,得到容器各阶固有频率对液体晃荡的影响。研究发现,基频对液体晃荡的影响最大,且非线性越强,更高阶容器固有频率的影响越大。     

Sloshing waves and resonance modes of fluid in a 3D tank by a time-independent finite difference method

A 3D time-independent finite difference method is developed to solve for wave sloshing in a three-dimensional tank excited by coupled surge and sway motions. The 3D equations of fluid motion are derived in a moving coordinate system. The three-dimensional tank, with an arbitrary depth and a square base, is subjected to a range of excitation frequencies with motions that exhibit multiple degrees of freedom. For demonstration purposes the numerical scheme is validated by a benchmark study. Five types of sloshing waves were observed when the tank is excited by various excitation frequencies. A spectral analysis identified the resonant frequencies of each type of wave and the results show a strong correlation between resonant modes and the occurrence of the sloshing wave types. The method can be used to simulate fluid sloshing in a 3D tank with six-degrees of freedom.     

论风浪的局域结构──Ⅱ.风浪局域小波能谱的性质及应用

引入了局域小波能谱的局域间歇性度量,分析了不同风速下的风浪资料,结果表明,局域小波能谱可依局域频率分为三部分。风浪的群性在三维局域小波能谱图像下显示得更为明显,与风浪有关的一切性质都是局域的,包括风浪的群性。讨论了局域小波谱峰值与谱峰频率的涨落,指出了前者在工程设计中的重要意义,并发现了后者与风浪破碎有关的两种非线性现象。