Displacements of ridges and subduction zones in the models of mantle convection with lithospheric plates

In the existing kinematic theory of the tectonics of lithospheric plates, the position and the parameters of plates are assigned a priori in the initial and boundary conditions. However, in the self-consistent dynamic theory, the properties of oceanic plates (as well as the structure of the mantle’s convection) should appear automatically as the solution of the differential equations of energy, mass, and momentum transfer for a viscous fluid. In this case, the viscosity of the mantle’s substance as a function of temperature, pressure, shear stress, and chemical composition must be taken from the data of laboratory measurements. In the present work, the results of the numerical solution of the equations of convection are presented in the problem formulation mentioned above on a simple model of heated viscous fluid with properties that correspond to the mantle’s substance. In this case, to reveal the main reason for the generation of plates and their influence on the convection, a number of simplifications are introduced; in particular, temperature variations in the viscosity in the mantle are disregarded. In spite of the undertaken simplifications, the models show how the rigid lithosphere can be split into separate plates immersed in the mantle, how in the course of evolution the sizes of plates and their number can change, and how in this case the ridges and subduction zones can be displaced.     

Rheology of the mantle and tectonics of the oceanic lithospheric plates

The modern concepts of the rheology of viscous mantle and brittle lithosphere, as well as the results of the numerical experiments on the processes in a heated layer with a viscosity dependent on pressure, temperature, and shear stress, are reviewed. These dependences are inferred from the laboratory studies of olivine and measurements of postglacial rebound (glacial isostatic adjustment) and geoid anomalies. The numerical solution of classical conservation equations for mass, heat, and momentum shows that thermal convection with a highly viscous rigid lithosphere develops in the layer with the parameters of the mantle with the considered rheology under a temperature difference of 3500 K, without any special additional conditions due to the self-organization of the material. If the viscosity parameters of the lithosphere correspond to dry olivine, the lithosphere remains monolithic (unbroken). At a lower strength (probably due to the effects of water), the lithosphere splits into a set of separate rigid plates divided by the ridges and subduction zones. The plates submerge into the mantle, and their material is involved in the convective circulation. The results of the numerical experiment may serve as direct empirical evidence to validate the basic concepts of the theory of plate tectonics; these experiments also reveal some new features of the mantle convection. The probable structure of the flows in the upper and lower mantle (including the asthenosphere), which shows the primary role of the lithospheric plates, is demonstrated for the first time.     

Mantle flow with existence of plates and generation of the toroidal field

The observed plate velocities contain two types of motions. The poloidal component is related to the formation of ridges and subduction zones and the toroidal field expresses the shearing of surface plates. One very important consideration in modeling flow in the earth's mantle is the existence and motion of the lithospheric plates. The motion of plates represents a large-scale circulation with strong viscous coupling to the mantle underneath. The mantle flow probably is neither a purely free convection driven by buoyancy forces due to nonadiabatic temperature gradients in the mantle nor a forced convection generated by boundary forces, but a mixed convection that combines the effects of boundary and buoyancy forces. We present, in this paper, the mixed convection model resulting in a surface velocity field that contains both the observed poloidal and toroidal components.     

Upper mantle convection driving by density anomaly and a test model

Introduction Richter and Mckenzie (1978) supposed that there is a small-scale convection system in the mantle. For a long time lots of research provides observational data to infer the possibility of a small-scale convection in the upper mantle. For example, Haxby and Weissel (1986) discussed the relationship between SEASAT map and small-scale convection. Baudry and Kroenke (1991), Maia and Diament (1991) found that the geoid and bathymetry exhibit peaks in the 400~650 km range in the Pa…     

上地幔密度异常驱动小尺度对流及实验模型

建立了由密度异常驱动上地幔小尺度对流的数学 物理模型, 发展了利用地震层析成像数据反演上地幔小尺度对流的基本理论和方法. 该模型建立在三维直角坐标系框架上, 假设地震层析成像所显示的地震波速度异常对应于上地幔物质密度异常, 而该密度异常反映了上地幔小尺度热对流系统的温度异常场. 模型首先将地震层析成像确定的地震波速度异常转换为密度异常, 并视其为对流的驱动力; 进而利用三维傅立叶变换, 在波数域内, 在给定的边界条件下, 求解控制流体行为的运动方程和连续性方程, 最后求得对流的流场. 为检验本研究提出的理论和方法的有效性, 本文使用了两个简单的实验模型: 热体和冷体模型; 俯冲断离( break off)板片模型, 计算了其驱动的地幔流场. 结果表明, 本文提供的理论和方法, 可以直接应用于与区域岩石层构造动力学相关的上地幔小尺度对流的研究.      

Viscosity distribution in the mantle convection models

Viscosity is a fundamental property of the mantle which determines the global geodynamical processes. According to the microscopic theory of defects and laboratory experiments, viscosity exponentially depends on temperature and pressure, with activation energy and activation volume being the parameters. The existing laboratory measurements are conducted with much higher strain rates than in the mantle and have significant uncertainty. The data on postglacial rebound only allow the depth distributions of viscosity to be reconstructed. Therefore, spatial distributions (along the depth and lateral) are as of now determined from the models of mantle convection which are calculated by the numerical solution of the convection equations, together with the viscosity dependences on pressure and temperature (PT-dependences). The PT-dependences of viscosity which are presently used in the numerical modeling of convection give a large scatter in the estimates for the lower mantle, which reaches several orders of magnitude. In this paper, it is shown that it is possible to achieve agreement between the calculated depth distributions of viscosity throughout the entire mantle and the postglacial rebound data. For this purpose, the values of the volume and energy of activation for the upper mantle can be taken from the laboratory experiments, and for the lower mantle, the activation volume should be reduced twice at the 660-km phase transition boundary. Next, the reduction in viscosity by an order of magnitude revealed at the depths below 2000 km by the postglacial rebound data can be accounted for by the presence of heavy hot material at the mantle bottom in the LLSVP zones. The models of viscosity spatial distribution throughout the entire mantle with the lithospheric plates are presented.     

地幔对流与岩石层板块的相互耦合及影响──（Ⅰ）球腔中的自由热对流

板块运动是地幔对流的主要证据之一．同时，作为地球动力系统中一个相对独立部分，板块自身的存在和运动对地幔内部物质的流动形态有巨大影响．地幔内部的流动由两部分组成：一是由内部非绝热温度差异造成的自由对流解；另一部分是由在地表运动的板块所激发．作为系列工作的第一部分，本文研究球腔中的自由热对流问题．得到了对地幔对流研究有实际意义的下边界为自由、上边界为刚性情况下的临界瑞利数值，不同的瑞利数时球腔内流场和温度场的分布形态等．     

Influence of an endothermic phase transition on mass transfer between the upper and the lower mantle

Geochemical data indicate that two major reservoirs 1–2 Ga in age are present in the mantle. The upper mantle, feeding mid-ocean ridges, is depleted in chemical elements carried away into the continental crust. The lower mantle, feeding hotspot plumes, is close in composition to primordial matter. The 660-km depth of an endothermic phase transition in olivine has been considered over the last two decades as a possible boundary between the reservoirs. In this period, many models of mantle convection were constructed that used values of the phase transition parameters, which led to temporal (up to 1 Gyr long) convection layerings and periodic avalanche-induced mantle intermixing events. However, laboratory measurements with new improved instrumentation give other values of the phase transition parameters that require a revision of the majority of the existence of large-scale avalanches in the Earth’s history becomes disputable. The paper is devoted to comprehensive study of the phase transition effect on the structure of mantle flows with different values of phase transition parameters and Rayleigh numbers; in particular, the mass transfer through the phase boundary is calculated for different regimes of steady-state convection.     

The mantle convection model with non-Newtonian rheology and phase transitions: The flow structure and stress fields

The mantle convection model with phase transitions, non-Newtonian viscosity, and internal heat sources is calculated for two-dimensional (2D) Cartesian geometry. The temperature dependence of viscosity is described by the Arrhenius law with a viscosity step of 50 at the boundary between the upper and lower mantle. The viscosity in the model ranges within 4.5 orders of magnitude. The use of the non-Newtonian rheology enabled us to model the processes of softening in the zone of bending and subduction of the oceanic plates. The yield stress in the model is assumed to be 50 MPa. Based on the obtained model, the structure of the mantle flows and the spatial fields of the stresses σ_xz and σ_xx in the Earth’s mantle are studied. The model demonstrates a stepwise migration of the subduction zones and reveals the sharp changes in the stress fields depending on the stage of the slab detachment. In contrast to the previous model (Bobrov and Baranov, 2014), the self-consistent appearance of the rigid moving lithospheric plates on the surface is observed. Here, the intense flows in the upper mantle cause the drift and bending of the top segments of the slabs and the displacement of the plumes. It is established that when the upwelling plume intersects the boundary between the lower and upper mantle, it assumes a characteristic two-level structure: in the upper mantle, the ascending jet of the mantle material gets thinner, whereas its velocity increases. This effect is caused by the jump in the viscosity at the boundary and is enhanced by the effect of the endothermic phase boundary which impedes the penetration of the plume material from the lower mantle to the upper mantle. The values and distribution of the shear stresses σ_xz and superlithostatic horizontal stresses σ_xx are calculated. In the model area of the subducting slabs the stresses are 60–80 MPa, which is by about an order of magnitude higher than in the other mantle regions. The character of the stress fields in the transition region of the phase boundaries and viscosity step by the plumes and slabs is analyzed. It is established that the viscosity step and endothermic phase boundary at a depth of 660 km induce heterogeneities in the stress fields at the upper/lower mantle boundary. With the assumed model parameters, the exothermic phase transition at 410 km barely affects the stress fields. The slab regions manifest themselves in the stress fields much stronger than the plume regions. This numerically demonstrates that it is the slabs, not the plumes that are the main drivers of the convection. The plumes partly drive the convection and are partly passively involved into the convection stirred by the sinking slabs.     

The generation of plate tectonics from mantle convection

In the last decade, significant progress has been made toward understanding how plate tectonics is generated from mantle dynamics. A primary goal of plate-generation studies has been the development of models that allow the top cold thermal boundary layer of mantle convection, i.e. the lithosphere, to develop broad and strong plate-like segments separated by narrow, weak and rapidly deforming boundaries; ideally, such models also permit significant strike-slip (toroidal) motion, passive ridges (i.e. pulled rather than pried apart), and self-consistent initiation of subduction. A major outcome of work so far is that nearly all aspects of plate generation require lithospheric rheologies and shear-localizing feedback mechanisms that are considerably more exotic than rheologies typically used in simple fluid-dynamical models of mantle flow. The search for plate-generating behavior has taken us through investigations of the effects of shear weakening (‘stick-slip’) and viscoplastic rheologies, of melting at ridges and low-viscosity asthenospheres, and of grain-size dependent rheologies and damage mechanics. Many such mechanisms, either by themselves or in combination, have led to self-consistent fluid-mechanical models of mantle flow that are remarkably plate-like, which is in itself a major accomplishment. However, many other important problems remain unsolved, such as subduction intiation and asymmetry, temporal evolution of plate geometry, rapid changes in plate motion, and the Archaean initiation of the plate-tectonic mode of convection. This paper presents a brief review of progress made in the plate-generation problem over the last decade, and discusses unresolved issues and future directions of research in this important area.     

Transient creep of the lithosphere and its role in geodynamics

Laboratory experiments with samples of rocks show that at small strains there is transient creep, at which the strain grows with time, and the strain rate decreases. Plate tectonics allows only small strains in the lithospheric plates, so that the lithosphere creep is transient. In geodynamics, the lithosphere is regarded as a cold boundary layer formed by mantle convection. If we assume that the lithosphere has a steady-state creep, which is described by power-law non-Newtonian rheological model, the low effective viscosity of the lower layers of the lithosphere, obtained by data on small-scale postglacial flows, is possible only at high strain rates in these layers. However, the high strain rates in the lithosphere induce large strains that contradict plate tectonics. Transient creep of the lithosphere leads to its mobility at small strains, removing the discrepancy between thermal convection in the mantle and plate tectonics, which holds in the case of power-law rheological model of the lithosphere.     

Upper mantle flow beneath the Northwest of China and its lithospheric dynamics

ＵｐｐｅｒｍａｎｔｌｅｆｌｏｗｂｅｎｅａｔｈｔｈｅＮｏｒｔｈｗｅｓｔｏｆＣｈｉｎａａｎｄｉｔｓｌｉｔｈｏｓｐｈｅｒｉｃｄｙｎａｍｉｃｓＪＩＡＮ－ＨＵＡＨＵＡＮＧＩ（黄建华）；ＸＩＡ－ＨＵＡＣＨＡＮＧＩ（常筱华）ａｎｄＲＯＮＧ－ＳＨＡＮＦＵＩ傅容珊）（...     

地幔对流的实验研究:非立柱状幔柱和地幔涡旋

地幔对流的物理模拟实验结果表明 ,在地幔介质和温度非均匀分布的复杂条件下 ,热卷流 (地幔柱 )往往由立柱状转变为非立柱状 (含斜柱状、涡旋状等 )。在忽略科里奥利力的情况下 ,板块的下插和滞积下沉、岩石圈根的存在以及地幔介质粘度的非均匀分布等都可能构成不同形状的障碍 -导流体 ,导致地幔的涡旋运动。软流圈中的水平涡旋环带属于对数螺线型 ,环带旋转半径及线速度逐渐减小 ,最终在旋转中心处下沉 ,而旋转角速度大致保持恒定     

On the importance of advection in determining the local isotopic composition of the mantle

The equations for isotopic evolution in a deforming medium are derived and used to show that the local isotopic composition of the mantle depends primarily on the advection of heterogeneities by the flow field. Various examples of the role of advection are given using a two-scale model of mantle convection. The effect of small-scale flows, which have dimensions smaller than the plates themselves, is to convert any initially localized heterogeneity into thin spiral sheets. The isotopic properties of erupted lavas will depend on the relative size of the zone of partial melt to the spacing between such sheets. An idealized model for⁸⁷Sr/⁸⁶Sr variations from Pacific islands and the covariation of¹⁴³Nd/¹⁴⁴Nd-⁸⁷Sr/⁸⁶Sr is based on the combined effect of isotopic fluxes at subduction zones and advection by the return flow under the moving lithospheric plates.     

The upper mantle flow beneath the North China Platform

In this paper we establish an upper mantle convection model which is constrained by regional isostatic gravity anomalies. Comparing the computed convection patterns with the tectonic features of the North China Platform we find that there are two positive anomaly centers connected with upward flows. These anomalies belong to the tectonic units of the Shan-Xi geoanticline and the Lu-Xi geoanticline. The centers of downward flows are connected with the tectonic units of the Liao-Ji geosyncline. It is reasonable to suggest that the upward mantle flows push the lithosphere upward and generate the observed positive isostatic gravity anomaly. The downward mantle flows pull the lithosphere down and generate the negative anomaly. However, the use of simple analysis makes it difficult to explain the complex lithospheric dynamics of this region. In order to understand lithospheric structures and tectonic features we must investigate the mechanical properties of the lithosphere and the relationship between the lithosphere and the mantle. These problems are discussed in the last section of this paper.     

青藏高原-天山地区岩石层构造运动的地幔动力学机制

利用全球重力大地水准面异常、板块绝对运动及全球地震层析成像数据,计算了青藏高原-天山地区岩石层下部地幔大尺度对流格局以及此种尺度对流驱动下岩石层内应力场分布;同时,利用区域均衡重力异常数据反演青藏高原中、北部到天山地区上地幔小尺度对流模型．结果表明,大尺度的地幔物质运移过程可能驱动着中国大陆岩石层整体从西部以南北方向为主的运动转向东部地区以北东和南东方向的运动;而该区域上地幔小尺度上升流动支持了现代青藏高原和天山地区的抬升运动．提出和讨论了青藏高原隆升的“断离隆升-挤压隆升-对流隆升”三阶段模式,并探讨了大陆岩石层构造运动的地幔深部动力学背景．     

Plume Mode of Thermal Convection in the Earth’s Mantle

In our previous works, based on numerical models, it was shown that under certain conditions a hot material can rise in portions in the tails of thermal mantle plumes. The spectrum of these pulsations can correspond to the observed spectra of catastrophic hotspot eruptions. Since most of the existing numerical models of thermal convection for the mantle of the present Earth do not reveal these pulsations, in this work, we analyze the physical cause and initiation conditions of pulsations of thermal plumes. The results of a numerical solution of the thermal convection equations for a material with varying parameters in the extended Boussinesq approximation are presented. It is shown how the structure of the convection is transformed with the increase of convection intensity. At the Rayleigh numbers Ra > 10⁶, convection becomes unsteady, and the configuration of the ascending and descending flows changes. The new flow emerging at the mantle bottom acquires a mushroom shape with a head and a tail. After the rise of the plume’s head to the surface, the tail remains in the mantle in the form of a quasi-stationary hot steam. It turns out that at Ra ~ 5 × 10⁷, the thermal mantle plume becomes pulsating and its tail is in fact a heated channel through which the hot material rises in successive portions. At the Rayleigh numbers Ra > 5 × 10⁸, the tail of the thermal plume breaks and the plume becomes a regular conveyor of separate ascending portions of the hot material, which are referred to as thermals. Thus, thermal convection with pulsating plumes takes place at the transitional stage from the regime of quasi-stationary plumes to the regime of thermals.     

Three-dimensional mantle lithosphere deformation at collisional plate boundaries: A subduction scissor across the South Island of New Zealand

The continental plate collision across the South Island of New Zealand is highly oblique (dextral) and bounded by oppositely verging ocean plate subduction zones. As such, the region can be considered as a type of ‘subduction scissor’. Within this tectonic context, we use three-dimensional computational geodynamic models to consider how convergent mantle lithosphere can be modified by scissor and strike–slip effects. Bounding subduction at both ends of the continental collision causes flow of the descending mantle lithosphere in the direction along strike of the model plate boundary, with thinning in the centre and thickening towards the subduction zones that bifurcates the continental mantle lithosphere root. With dipping bounding subduction, the mantle lithosphere root takes on a more complex morphology that folds over from one subduction polarity to the other, but remains as a continuous feature as it folds under the collision zone. In the absence of bounding subduction, the plate convergence causes a linear (along strike) mantle lithosphere root to develop. A rapid strike–slip motion between the converging plates transfers material in the plate boundary-parallel direction and tends to blur out features that develop in this direction—such as descending viscous instabilities. The along-strike variations in the morphology of the mantle lithosphere root that develop in the models—viz., thickening of the root towards the subduction edges, thinning in the centre—are consistent with recent, albeit poorly constrained, geophysical interpretations of the large-scale lithospheric structure of the South Island. We speculate that this reflects the nature of the evolution of the South Island collision as a limited continental segment of the plate boundary that it is dominated and guided by adjacent well-developed/developing ocean plate subduction.     

Influence of low viscosity asthenosphere on mantle flows

Numerical simulation in recent years has revealed that the cold lithosphere, whose viscosity is three to four orders of magnitude higher than that of the underlying mantle, behaves during mantle convection as a stagnant lid. On the basis of model calculations, this paper shows how convection changes over to this regime with increasing viscosity. Spatially fixed high viscosity inclusions and those moving with the convective flow have fundamentally different effects on the structure of convective flows. The model calculations indicate that anomalously low viscosity asthenospheric regions also lead to a specific regime of convection. With a decrease in the viscosity by more than three orders of magnitude, a further reduction in the viscosity of the region ceases to influence the structure of convection in the outer region. The boundary with this region behaves as a freely permeable boundary. In the low viscosity asthenospheric region itself, autonomous convection can arise under certain conditions.