半刚性复合地基沉降实用计算方法的探讨

本文对半刚性复合地基的沉降实用计算方法进行了分析，将临界桩长问题引入复合地基沉降计算方法，提出了复合地基沉降计算的若干建议，构成了更合理、更符合实际的计算方法。最后通过实例计算验证，文中建议方法的计算结果与实测值甚为吻合。     

实测流量计算方法分析及建议

本文提出流速面积法计算断面实测流量的通用公式，分析和比较了国内外流速面积法常见的几种实测流量计算方法的精度，指出了我国现行实测流量计算方法存在的理论缺陷，和由此形成的系统偏差。提出了新的实测流量计算方法。分析和实例证明，这种计算方法易操作，且能大大提高实测流量计算的精度，对我国目前的流量观测计算具有重要的现实指导意义。     

水面蒸发折算系数的对比观测实验与分析计算

利用1987年以来的逐日对比观测系列资料，对水面蒸发折算系数进行了分析计算，取得了宝贵的研究成果。在21个计算时段中，相对误差值小于10％的时段17个，占计算时段的81％，计算时段越长，误差越小，若按全年统计，计算误差可控制在10％以内，表明折算系数计算结果是可靠的。     

四川盆地沉积岩矿复杂矿物定名微机处理程序

岩石化学成分计算及矿物定名是一项复杂的劳动，过去都是手工计算。劳动强度大，准确率低。为了解决这一问题，利用Basic语言编写了RNCAC微机处理程序，对四川盆地沉积岩成分进行了计算，并对复杂矿物进行了定名，经手工检验，该程序计算准确率高。计算迅速，可以有效提高工作效率。减轻劳动强度。     

CASIOfx-4500PA型计算器在矿床地质勘查中的应用

CASIOfx-4500PA型计算器为可编程、大容量的科学计算器。通过对地质计算中面积计算、槽坑钻样品厚度计算、钻孔弯曲度修正值计算的原理阐述，简化了计算程序，提高了计算效率。     

高层建筑深基坑内桩基应力分析

近来高层建筑的基坑深度愈来愈深，基坑挖后引起了基坑内桩基应力变化，本文计算了由于地下降水及基坑开挖后桩基的应力变化，并计算了在基坑内做载荷试验时桩基应力变化，结合实际工程的计算，取得一些计算结果。     

顶管顶力计算公式辨析

目前随着非开挖技术日益得到社会的认同与重视，顶管工程出现了方兴未艾的局面。在工程实践中常常需要计算顶管顶进总推力，但是顶管推力计算了公式最多，而且计算结果差别相当大。基于上述原因，对各计算公式进行了对比分析并进行了归类，进而提出在工程计算中应注意的问题。     

用蒙特卡洛模拟法计算正交最小二乘法拟合参数的标准偏差

介绍了一种计算正交最小二乘法拟合参数标准偏差的新方法－蒙特卡洛模拟法，并以电子探针微区分析技术分析环境样品的数据为例，对用于计算经典最小二乘法回归系数标准偏差的公式法和蒙特卡洛模拟法进行了比较。计算结果表明，两者完全相符，蒙特卡洛模拟法的计算结果正确、可靠。考察了模拟次数对计算结果的影响。模拟次数大于500时，计算结果趋于稳定，计算所需时间在1min以内。拟合方差与回归系数标准偏差存在明显的相关关系。线性模型能解释的方差越大，回归系数标准偏差越小。蒙特卡洛模拟法特别适合于非线性模型拟合参数标准偏差的计算。     

《全国水利系统水环境监测质量控制工作实施方案》中有关计算问题的探讨

在水环境监测质量控制工作的统计计算过程中，提出了有关参数简单快捷的计算方法，介绍了计算方法原理。经实例应用并与常规方法对比，得到了满意的结果。     

频率测探正演滤波算法及算例

通过对频率测深理论的研究，提出了水平电偶极场视电阻率改进滤波算法，并编制了正演计算的实用程序。理论模型计算表明，改进滤波算法 效果好，计算速度快。     

Isotope Geochemistry of Gold Ore Deposits in the Gezhen Shear Zone, Qiongxi, Hainan Island

Gold deposits hosted in the Gezhen shear zone at Qingxi, Hainan Island occur in the Preeambrian metamorphic rock series and are regionally developed in the N-E direction along the tectonic zone. From northeast to southwest are distributed the Tuwaishan-Baoban gold mining district, the Erjia gold mining district and the Bumo gold mining district, making up the most industrially important gold metallogenesis zone on the Hainan Island. Isotope geochemical studies of the typical gold deposits in this metallogenesis zone indicate that their ore-forming materials stemmed largely from the Baoban Group migmatite series, though the involvement of some plutonic materials could not be ruled out. The ore fluids are the mixture of migrnatitized hydrothermal solutions and meteoric waters in addition to the involvement of local magmatic hydrothermal solutions. The superimposition of plutonie materials and magmatic hydrothermal solutions is controlled by the deformation environment of the shear zone and later magrnatic activities. Obvious variations are noticed in isotopic composition in the region studied, probably related to tectonic deformation, metamorphism and other evolutionary characteristics. This study is of great significance in understanding the relationship between the shear zone and gold metallogenesis,the rules of gold metallogenesis and gold ore prognosis.     

Structural geochemistry of gold mineralization in the Linglong-Jiaojia district, Shandong Province, China

The Linglong-Jiaojia district is one of the most important regions containing gold deposits in China. These gold deposits can be divided into: a) the pyrite-gold-quartz vein type (Linglong type), which is controlled by brittle-ductile to ductile deformation structures, and b) the alteration-zone type (Jiaojia type), characterized by small veinlets, or the disseminated type recognized in brittle shear zones. Lode gold deposits in the Jiaojia area occur in NE brittle fracture zones, formed in a dominantly simple shear deformation regime, mainly in thrust attitude with a minor sinistral strike slip component. In the Linglong area, the lode gold deposits are located at the intersection of three types of structures: NNE and NE brittle-ductile fault zones and the ENE ductile reverse shear zone in the south of the area. The structural characteristics of these brittle shear zones are consistent with a tectonic NNW-SSE principal stress field orientation. Similar stresses explain the ENE Qixia fold axes, the Potouqing and several other ENE reverse ductile shear zones elsewhere in the region, the Tancheng-Lujiang fault zone and its subsidiaries in the vicinity of the Linglong-Jiaojia district, as well as the southern ENE suture zone north of Qingdao. Therefore these structural systems occurred as part of different major tectonic events under NNW-SSE compression principal stress fields in the area. Gold deposits are hosted in smaller-scale structures within the brittle fault zones and brittle-ductile shear zones. Although ore bodies and, on a smaller scale, quartz ore veins often seem to be randomly oriented, it is possible to explain their distribution and orientation in terms of the simple shear deformation process under which they were developed. The progressive simple shear failure is characterized by various fracture modes (tension and shear) that intervene in sequence. The tension and shear fractures are influenced by the stress level (depth of burial beneath the paleosurface) in their structural behavior, show variable dilatancy (void openings) and extend on all scales. By making use of these characteristics, a progressive failure analysis can be applied to predicting the shape and extent of ore bodies as well as the styles of mineralization at any given location.     

吉林六批叶沟含金剪切带地质特征

六批叶沟含金剪切带位于吉林夹皮沟金矿以南的三道溜河一带，属夹皮沟金矿NW向控矿构造的南东延伸。通过对含金剪切带的空间展布、岩石组合、变形结构特征和金矿化特征等的初步研究，认为剪切带内的金矿(化)体是多次含矿热液活动叠加的结果，产于脆—韧性剪切带内的金矿床，具有大型规模远景。初步认为主要成矿期是中生代微晶闪长岩定位之后的晚印支期。     

吉林辉南石棚沟金矿床地质特征及其找矿前景

石棚沟金矿床严格受北东向韧性剪切带控制,赋矿构造主要为后期叠加于韧性剪切带之上的北东、北西向脆性剪切裂隙,以北东向为主。矿体围岩为花岗质糜棱岩,并与煌斑岩关系密切。矿石类型为贫硫化物石英脉型,呈细脉状、网格状分布,单矿脉规模一般长不超过50 m,宽不超过1 m,走向及倾向上膨缩明显并很快尖灭。结合区域韧性剪切带型金矿床构造演化与金矿化类型叠加复台关系模式认为,石棚沟金矿床处于韧性带顶端,向深部找矿潜力较大。     

江西大背坞金矿床含矿构造带主要微量元素地球化学特征

大背坞金矿床处于大背坞-洋乐桥NE向韧性剪切带形变、相变最强烈的西南段。含矿构造带内几种微量元素含量变化显示:构造岩的形变相变过程及其相互叠加与金矿化富集过程是同步的;成矿指示元素主要地球化学参数沿含矿构造带的变化,表明深部可能存在良好的成矿远景。      

新疆东天山康古尔塔格金矿带成矿作用的构造制约

康古尔塔格金矿带呈东西向展布于新疆东天山晚古生代造山带的中部，发育在秋格明塔什-黄山韧性剪切带的南缘，阿奇山-雅满苏火山岩带的北缘，形成的金矿床可划分为三种主要端元类型，即浅成低温热液型（热泉型）、剪切带交代蚀变岩型、与中浅成花岗岩类有关的石英脉型。金的成矿作用主要受控于二叠纪后碰撞阶段秋格明塔什-黄山大型韧性剪切带形成的右行走滑剪切系统，在剪切系统的不同构造部位由于应力应变状态的不同、岩石渗透率的不同、构造层次（深度）的不同等，导致成矿流体和成矿物质在组成比例上的差异，从而形成不同类型的金矿床。所有类型的金矿资源是在同一构造环境下相同区域成矿事件的产物，在不同构造部位产出的金矿床类型可以组成一个连续的金矿化系列。区域一级剪切构造带控制金矿带成矿物质和成矿流体的主要来源，二级剪切构造控制金矿床的发育，三级剪切裂隙系统控制金矿体（脉）的产出，从而构成三级构造控矿系统。     

吉林白山金英金矿区域构造研究

经过细致的野外工作和室内分析将金英金矿床构造划分为北东、北西、东西、北北东、南北等5个构造带及华夏系、北西向构造带、东西向构造带、新华夏系、南北向构造带等5个构造体系,提出了华夏系→北西向构造带→东西向构造带→新华夏系→南北向构造带的构造演化史。研究表明,区域上以华夏系构造为主,金英金矿床金矿化处于北西向构造带中并沿北东向构造分布,即北西向构造与北东向构造交汇部位是成矿的有利部位。     

柳河一带变质核杂岩构造与金矿成矿关系探讨

柳河地区变质核杂岩顶部发育的大型韧性剪切带内金矿点星罗棋布,可开发利用的金矿产较少,文中探讨了金矿产形成作用与韧性剪切带和拆离断层的关系,认为金矿产在深部形成后能够抬升至浅表层次的重要条件是构造抬升,但是区域构造活动进入稳定期后,隐伏的矿产已经不再具备构造抬升条件,所以该区深部隐伏金矿产的寻找是重要的找矿方向。     

Source of ore-forming material for the Huangtuliang gold deposit,Hebei Province and ore prospecting in the deep periphery

The Huangtuliang gold deposit is characterized by its wide and large ore belt, stable extension and closely spaced orebodies. Unfortunately, no orebody was found by deep drilling. As a result, ore prospecting in this region was once put into dilemma. Detailed analysis of ore-forming and ore-controlling structures in the mining district by the authors has revealed that the ore-forming and ore-controlling structure in this mining district is a steeply dipping （85°-110°/∠70°-85° N-NNE）, spade-shaped ductile shear zone, and the ore-controlling structures are a series of nearly erected second-ordered faults which are developed in the upper part of the ductile shear zone, inter-secting with the ductile shear zone. Deep cutting of the ductile shear zone made it possible the ascending of ore fluids from the mantle plume at depth and these ore fluids would migrate upwards along the ductile shear zone under certain temperature and pressure conditions. Along their ascending path, the ore fluids would extract ore-forming elements from the country rocks and the extracted ore-forming elements would be deposited as ores in the hang- ing-wall second-ordered faults. The reason why no orebody was found in early prospecting at depth is that north- ward-dipping drilling in the southern part of the shear zone extended so deeply as to be beneath the shear zone. Only shallow-level orebodies could be found by southward-dipping drilling practice in the northern part of the shear zone. The location where deep-seated orebodies occurred shifted northwards and the orebodies occurred at greater depth. Therefore, it is natural that no orebody could be found when drill core passed through the shear zone. After the ore-forming and ore-controlling structures were well understood, the focus of ore prospecting was placed on the deep-level, northward-penetrating veins. In this way a number of new blind orebodies of great thickness have been found. On the basis of research development in the mining district, a prospecting plan has been made     

新疆萨尔托海石英菱镁岩中发育的韧性剪切带及其对金矿的控制

萨尔托海金矿产在达拉布特蛇绿混杂岩带中。本文首次在该金矿区厘定出韧性剪切带,糜棱岩或者糜棱岩化石英菱镁岩中构成糜棱面理的矿物(铬云母、石英)形成于韧性剪切变形过程中,而切割糜棱面理的方解石-石英-黄铜矿-白云母脉代表脆性变形阶段的流体活动。根据矿物组合相互切割关系,识别出三期构造变形:早期NE向韧性变形(形成铬云母-石英组合)之后,发生了应力方向显著不同的破裂,形成NNW向分布的方解石-石英-黄铜矿-白云母脉;再晚期,应力方向又恢复到NE向,发育了浅层次的脆性构造破坏,形成了白云母-石英细脉。韧性剪切变形向脆性变形转换期间形成了石英-碳酸盐脉,其中往往含硫化物和自然金,此阶段是萨尔托海金矿的主要成矿时期。韧性剪切带控制着萨尔托海地区的金矿分布,成矿作用主要受沿剪切带迁移流体的控制,穿切糜棱面理的方解石-石英-黄铜矿-白云母脉是主要的找矿标志。韧性剪切带对金矿的显著控制表明,韧脆性转换期间形成的含硫化物石英碳酸盐脉以及相伴生的热液蚀变使金富集成矿,矿体一般赋存在断裂构造复杂的膨胀部位。萨尔托海金矿的成因与蛇绿岩的形成和演化没有关系。对韧性剪切带的系统研究是在该地区取得找矿勘探突破的关键。