Chemical and physical weathering in New Zealand’s Southern Alps monitored by bedload sediment major element composition

The Haast and Clutha rivers drain opposing flanks of New Zealand’s Southern Alps. Major element analyses of grain size fractions (2–1 mm, 1 mm–355 μm, 355–63 μm, and <63 μm) from bedload sediments collected throughout the reach of each river suggest that weathering is strongly partitioned between the chemical weathering of carbonates and the physical weathering of silicates. Sand size fractions from both rivers are depleted in CaO (∼0.2–2.1 wt%) relative to source schists (∼3 wt% CaO), while silt fraction CaO concentrations range from 2–5 wt%. The depletion of CaO in the sediments is interpreted to be due at least in part to removal of carbonate during chemical weathering of the schist protolith in the soil zone. The observed covariance of CaO and P₂O₅ concentrations in all river sediment suggests that most CaO is bound in a combination of phosphate-bearing minerals such as apatite along with other heavy mineral phases with similar hydrodynamic properties (e.g. epidote). Chemical index of alteration (CIA) values for grain size fractions from both rivers are similar (Haast: 54–63, Clutha: 49–61) and do not systematically vary with grain size or sample location. Al₂O₃–CaO^∗ + Na₂O–K₂O (A–CN–K) relationships suggest that CIA values are controlled by albite–muscovite mixing rather than feldspar weathering. Both A–CN–K relationships and modal mineralogical calculations from Clutha river samples indicate progressive downstream attrition of muscovite from coarser to finer grain size fractions. In contrast, Haast river sediments display less variable normative muscovite concentrations and no downstream enrichment/depletion trends.     

Transportation and evolution of trace element bearing phases in stream sediments in a mining – Influenced basin (Upper Isle River,France)

Arsenic-bearing stream sediments enter the Upper Isle River, an Au mining-influenced basin (France), by the discharge of mining sites, tailings runoff and weathering of mineralized veins in granites and gneiss. Some fresh ochreous As-rich deposits on the river banks and in floodplains are identified as additional As-rich point sources (As between 0.07 and 6.5 wt.%). The <63 μm fraction of stream sediments contains elevated As bulk concentrations, ranging from 160 to 890 mg/kg, compared to the geochemical background (70 mg/kg on average). It is also enriched in Cd, Hg and W. Spatial variations of these trace elements show 3 significant increases corresponding to the 3 drained mining districts. They decrease down river but are still enriched 30 km downstream of the mining districts due to downstream transportation. Three types of trace element-bearing phases have been identified as: (i) detrital primary sulfides, with high in situ As percentages (up to 43.7 wt.%). They also carry significant amounts of W according to the differences in chemical compositions of the total and light <63 μm fractions. These sulfide particles do not show any sign of alteration in the oxygenated stream sediments; (ii) Secondary Fe–Mn oxyhydroxides,some with very high in situ As₂O₅ concentrations (up to 59.8 wt.%) and with about 40% of the total Cd composition. They occur as fresh precipitates in the river banks and floodplains and as discrete particles in stream sediments and (iii) Al–Si fine-grained phases. Their major element composition is highly variable with in situ As₂O₅ concentrations ranging between 430 and 5020 mg/kg. This type of solid phase is also the major carrier of Hg.     

Sources of stream sediments in the granulite terrain of the Walawe Ganga Basin,Sri Lanka,indicated by rare earth element geochemistry

Thirty-eight samples of stream sediments draining high-grade metamorphic rocks in the Walawe Ganga (river) Basin, Sri Lanka, were analysed for their REE contents, together with samples of metamorphic suites from the source region. The metamorphic rocks are enriched in light REE (LREE) compared to heavy REE (HREE) and are characterised by high La/Lu ratios and negative Eu anomalies. The chondrite-normalised patterns for these granulite-grade rocks are similar to that of the average post-Archaean upper crust, but they are slightly enriched with La and Ce. The REE contents of the <63-μm fraction of the stream sediments are similar to the probable source rocks, but the other grain size fractions show more enriched patterns. The <63-μm stream sediments fraction contains lower total REE, more pronouncd negative Eu anomalies, higher Eu_N/Sm_N and lower La _N/Lu_N ratios relative to other fractions. The lower La _N/Lu_N ratio is related to the depletion of heavy minerals in the <63-μm fraction. The 63–125-μm and 125–177-μm grain size fractions of sediments are particularly enriched in LREE (average ΣLREE=2990 μg/g and 3410 μg/g, respectively). The total HREE contents are surprisingly uniform in all size fractions. However, the REE contents in the Walawe Ganga sediments are not comparable with those of the granulite-grade rocks from the source region of the sediments. The enrichment of REE is accounted for by the presence of REE containing accessory mineral phases such as zircon, monazite, apatite and garnet. These minerals are derived from an unknown source, presumably from scattered bodies of granitic pegmatites.     

Variations of δSi and Ge/Si with weathering and biogenic input in tropical basaltic ash soils under monoculture

In soils, silicon released by mineral weathering can be retrieved from soil solution through clay formation, Si adsorption onto secondary oxides and plant uptake, thereby impacting the Si-isotopic signature and Ge/Si ratio of dissolved Si (DSi) exported to rivers. Here we use these proxies to study the contribution of biogenic Si (BSi) in a soil-plant system involving basaltic ash soils differing in weathering degree under intensive banana cropping. δ³⁰Si and Ge/Si ratios were determined in bulk soils (<2 mm), sand (50-2000 μm), silt (2-50 μm), amorphous Si (ASi, 2-50 μm) and clay (<2 μm) fractions: δ³⁰Si by MC-ICP-MS Nu Plasma in medium resolution, operating in dry plasma with Mg doping (δ³⁰Si vs. NBS28 ± 0.12‰ ± 2σ_SD), Ge/Si computed after determination of Ge and Si concentrations by HR-ICP-MS and ICP-AES, respectively. Components of the ASi fraction were quantified by microscopic counting (phytoliths, diatoms, ashes). Compared to fresh ash (δ³⁰Si = −0.38‰; Ge/Si = 2.21 μmol mol⁻¹), soil clay fractions (<2 μm) were enriched in light Si isotopes and Ge: with increasing weathering degree, δ³⁰Si decreased from −1.19 to −2.37‰ and Ge/Si increased from 4.10 to 5.25 μmol mol⁻¹. Sand and silt fractions displayed δ³⁰Si values close to fresh ash (−0.33‰) or higher due to saharian dust quartz deposition, whose contribution was evaluated by isotopic mass balance calculation. Si-isotopic signatures of bulk soils (<2 mm) were strongly governed by the relative proportions of primary and secondary minerals: the bulk soil Si-isotopic budget could be closed indicating that all the phases involved were identified. Microscopic counting highlighted a surface accumulation of banana phytoliths and a stable phytolith pool from previous forested vegetation. δ³⁰Si and Ge/Si values of clay fractions in poorly developed volcanic soils, isotopically heavier and Ge-depleted in surface horizons, support the occurrence of a DSi source from banana phytolith dissolution, available for Si sequestration in clay-sized secondary minerals (clay minerals formation and Si adsorption onto Fe-oxide). In the soil-plant system, δ³⁰Si and Ge/Si are thus highly relevant to trace weathering and input of DSi from phytoliths in secondary minerals, although not quantifying the net input of BSi to DSi.     

Rare earth elements (REE) and yttrium in stream waters, stream sediments, and Fe-Mn oxyhydroxides: Fractionation, speciation, and controls over REE + Y patterns in the surface environment

We have collected ∼500 stream waters and associated bed-load sediments over an ∼400 km² region of Eastern Canada and analyzed these samples for Fe, Mn, and the rare earth elements (REE + Y). In addition to analyzing the stream sediments by total digestion (multi-acid dissolution with metaborate fusion), we also leached the sediments with 0.25 M hydroxylamine hydrochloride (in 0.05 M HCl), to determine the REE + Y associated with amorphous Fe- and Mn-oxyhydroxide phases. We are thus able to partition the REE into “dissolved” (<0.45 μm), labile (hydroxylamine) and detrital sediment fractions to investigate REE fractionation, and in particular, with respect to the development of Ce and Eu anomalies in oxygenated surface environments. Surface waters are typically LREE depleted ([La/Sm]_NASC ranges from 0.16 to 5.84, average = 0.604, n = 410; where the REE are normalized to the North America Shale Composite), have strongly negative Ce anomalies ([Ce/Ce^∗]_NASC ranges from 0.02 to 1.25, average = 0.277, n = 354), and commonly have positive Eu anomalies ([Eu/Eu^∗]_NASC ranges from 0.295 to 1.77, average = 0.764, n = 84). In contrast, the total sediment have flatter REE + Y patterns relative to NASC ([La/Sm]_NASC ranges from 0.352 to 1.12, average = 0.778, n = 451) and are slightly middle REE enriched ([Gd/Yb]_NASC ranges from 0.55 to 3.75, average = 1.42). Most total sediments have negative Ce and Eu anomalies ([Ce/Ce^∗]_NASC ranges from 0.097 to 2.12, average = 0.799 and [Eu/Eu^∗]_NASC ranges from 0.39 to 1.43, average = 0.802). The partial extraction sediments are commonly less LREE depleted than the total sediments ([La/Sm]_NASC ranges from 0.24 to 3.31, average = 0.901, n = 4537), more MREE enriched ([Gd/Yb]_NASC ranges from 0.765 to 6.28, average = 1.97) and Ce and Eu anomalies (negative and positive) are more pronounced.The partial extraction recovered, on average ∼20% of the Fe in the total sediment, ∼80% of the Mn, and 21-29% of the REEs (Ce = 19% and Y = 32%). Comparison between REEs in water, partial extraction and total sediment analyses indicates that REEs + Y in the stream sediments have two primary sources, the host lithologies (i.e., mechanical dispersion) and hydromorphically transported (the labile fraction). Furthermore, Eu appears to be more mobile than the other REE, whereas Ce is preferentially removed from solution and accumulates in the stream sediments in a less labile form than the other REEs + Y. Despite poor statistical correlations between the REEs + Y and Mn in either the total sediment or partial extractions, based on apparent distribution coefficients and the pH of the stream waters, we suggest that either sediment organic matter and/or possibly δ-MnO₂/FeOOH are likely the predominant sinks for Ce, and to a lesser extent the other REE, in the stream sediments.     

Experimental study of the carbonation of partially serpentinized and weathered peridotites

Carbonation of partially serpentinized and weathered peridotites was studied experimentally under hydrothermal conditions (T: 200 °C, P_CO2: 130-180 bars). Experiments were performed in a closed system using whole rock drill core samples (height: 1 cm, diameter: 1 cm) as starting material. The initial samples were composed mainly of meshwork serpentine, relicts of primary olivine and an olivine weathering product (deweylite assemblage). Two types of solutions, each with a total salt content corresponding to that of average seawater (35 g/L dissolved salts), were used: (1) a Na-Ca-Cl solution (12.5 g/L CaCl₂ + 22.5 g/L NaCl) and (2) a NaCl solution (35 g/L NaCl). After 15-25 days of experimental treatment, the samples were partly covered with carbonates. In addition, noticeable carbonation reactions had occurred below the sample surfaces within zones with thicknesses up to 250 μm. In the Na-Ca-Cl solution, both the olivine relicts and the deweylite assemblage were partly replaced by calcite along the surrounding serpentine veins. However, the extent of calcitization was found to be considerably larger for the deweylite assemblage than for the olivine. Bulk fluid analyses show an increase in the Mg and Si concentrations with reaction time. In the NaCl solution, the deweylite assemblage was partly dissolved resulting in large voids within the reaction zone. In contrast, the olivine was replaced by magnesite. Under the conditions of our experiments, the meshwork serpentine was not reactive, but aided fluid infiltration into the rock samples. The experimentally produced microtextures closely resemble those found in natural examples. Our study elucidates the mechanisms by which carbonates form in ultramafic rocks under relatively high P_CO2-T conditions and particularly in the presence of Ca-bearing aqueous solutions. The existence of a serpentine meshtexture and the presence of weathering products formed from primary Mg-silicates may have significant beneficial effects on in situ CO₂ mineral sequestration in ultramafic rocks.     

Geochemical comparison of waters and stream sediments close to abandoned Sb-Au and As-Au mining areas,northern Portugal

Waters from abandoned Sb-Au mining areas have higher Sb (up to 2138 μg L⁻¹), As (up to 1252 μg L⁻¹) and lower Al, Zn, Li, Ni and Co concentrations than those of waters from the As-Au mining area of Banjas, which only contain up to 64 μg L⁻¹ As. In general, Sb occurs mainly as SbO₃⁻ and As H₂AsO₄⁻. In general, waters from old Sb-Au mining areas are contaminated in Sb, As, Al, Fe, Cd, Mn, Ni and NO₂⁻, whereas those from the abandoned As-Au mining area are contaminated in Al, Fe, Mn, Ni, Cd and rarely in NO₂⁻. Waters from the latter area, immediately downstream of mine dumps are also contaminated in As. In stream sediments from Sb-Au and As-Au mining areas, Sb (up to 5488 mg kg⁻¹) and As (up to 235 mg kg⁻¹) show a similar behaviour and are mainly associated with the residual fraction. In most stream sediments, the As and Sb are not associated with the oxidizable fraction, while Fe is associated with organic matter, indicating that sulphides (mainly arsenopyrite and pyrite) and sulphosalts containing those metalloids and metal are weathered. Arsenic and Sb are mainly associated with clay minerals (chlorite and mica; vermiculite in stream sediments from old Sb-Au mining areas) and probably also with insoluble Sb phases of stream sediments. In the most contaminated stream sediments, metalloids are also associated with Fe phases (hematite and goethite, and also lepidocrocite in stream sediments from Banjas). Moreover, the most contaminated stream sediments correspond to the most contaminated waters, reflecting the limited capacity of stream sediments to retain metals and metalloids.     

Geochemistry of late quaternary sediments from Tecocomulco lake, central Mexico: Implication to chemical weathering and provenance

This paper presents the first detailed multi-element geochemical data from the late Quaternary sediments of the Tecocomulco lake basin (central Mexico) and rocks exposed in the basin catchments to understand the extents of chemical weathering and provenance of the siliciclastic fractions. Ternary diagrams of A-CN-K, A-C-N and A-CNK-FM and elemental ratios suggest that most of the lacustrine sediments were derived from mafic volcanic deposits comprising the Chichicuatla and the Apan-Peñon andesites and the Apan-Tezontepec basaltic-andesites. The felsic tephra layers have chemical compositions comparable to the Acoculco volcanic sequences. The calculated indices of chemical weathering such as chemical index of alteration (CIA), plagioclase index of alteration (PIA) and chemical index of weathering (CIW) indicate low to extreme chemical weathering for the lacustrine sediments and low chemical weathering for tephra layers. The varying degree of chemical weathering in lacustrine sediments is related to the fluctuating average annual precipitation during the late Quaternary. However, the low weathering of tephra layers are due to their higher rate of deposition. The dacite-rhyolitic tephra layers of ca. 31,000 ¹⁴C yr BP are relatively more weathered compared to the unweathered rhyolitic tephra of ca. 50,000 ¹⁴C yr BP. This could be due to the rapid deposition of ca. 200 cm of tephra layers during the ca. 50,000 ¹⁴C yr BP volcanic eruption that might have prevented the interaction between tephra layers and weathering agents.     

Iron speciation and isotope fractionation during silicate weathering and soil formation in an alpine glacier forefield chronosequence

The chemical weathering of primary Fe-bearing minerals, such as biotite and chlorite, is a key step of soil formation and an important nutrient source for the establishment of plant and microbial life. The understanding of the relevant processes and the associated Fe isotope fractionation is therefore of major importance for the further development of stable Fe isotopes as a tracer of the biogeochemical Fe cycle in terrestrial environments. We investigated the Fe mineral transformations and associated Fe isotope fractionation in a soil chronosequence of the Swiss Alps covering 150 years of soil formation on granite. For this purpose, we combined for the first time stable Fe isotope analyses with synchrotron-based Fe-EXAFS spectroscopy, which allowed us to interpret changes in Fe isotopic composition of bulk soils, size fractions, and chemically separated Fe pools over time in terms of weathering processes. Bulk soils and rocks exhibited constant isotopic compositions along the chronosequence, whereas soil Fe pools in grain size fractions spanned a range of 0.4‰ in δ⁵⁶Fe. The clay fractions (<2 μm), in which newly formed Fe(III)-(hydr)oxides contributed up to 50% of the total Fe, were significantly enriched in light Fe isotopes, whereas the isotopic composition of silt and sand fractions, containing most of the soil Fe, remained in the range described by biotite/chlorite samples and bulk soils. Iron pools separated by a sequential extraction procedure covered a range of 0.8‰ in δ⁵⁶Fe. For all soils the lightest isotopic composition was observed in a 1 M NH₂OH-HCl-25% acetic acid extract, targeting poorly-crystalline Fe(III)-(hydr)oxides, compared with easily leachable Fe in primary phyllosilicates (0.5 M HCl extract) and Fe in residual silicates. The combination of the Fe isotope measurements with the speciation data obtained by Fe-EXAFS spectroscopy permitted to quantitatively relate the different isotope pools forming in the soils to the mineral weathering reactions which have taken place at the field site. A kinetic isotope effect during the Fe detachment from the phyllosilicates was identified as the dominant fractionation mechanism in young weathering environments, controlling not only the light isotope signature of secondary Fe(III)-(hydr)oxides but also significantly contributing to the isotope signature of plants. The present study further revealed that this kinetic fractionation effect can persist over considerable reaction advance during chemical weathering in field systems and is not only an initial transient phenomenon.     

Geochemical features of rocks,stream sediments,and soils of the Fiume Grande Valley (Calabria,Italy)

The role of both natural weathering and anthropogenic pollution in controlling the distribution of major oxides and several trace elements in soils, stream sediments, and rocks of the Fiume Grande catchment was evaluated. The contents of major oxides and trace elements in soils appear to be governed by weathering and pedogenetic processes, although the use of fertilizers in agriculture could also partly affect K₂O and P₂O₅ contents. Stream sediments have concentrations of major oxides (except CaO) very similar to soils, as relevant amounts of soil materials are supplied to the stream channels by erosive phenomena. In contrast, stream sediments have concentrations of Cr, Co, Ni, Zn, As, and Pb significantly higher than those of soils, probably due to different conditions and rates of mobility of these elements within the three considered matrices and/or disposal of wastes in the drainage network. Comparison of the concentrations of PHEs in soils with the maximum admissible contents established by the Italian law shows that these limits are too restrictive in some cases and too permissive in other ones. The approach of setting these limits with no consideration for the local geological–geochemical framework may lead to improper management of the territory and its resources. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Stream geochemistry, chemical weathering and CO2 consumption potential of andesitic terrains, Dominica, Lesser Antilles

Recent studies of chemical weathering of andesitic-dacitic material on high-standing islands (HSIs) have shown these terrains have some of the highest observed rates of chemical weathering and associated CO₂ consumption yet reported. However, the paucity of stream gauge data in many of these terrains has limited determination of chemical weathering product fluxes. In July 2006 and March 2008, stream water samples were collected and manual stream gauging was performed in watersheds throughout the volcanic island of Dominica in the Lesser Antilles. Distinct wet and dry season solute concentrations reveal the importance of seasonal variations on the weathering signal. A cluster analysis of the stream geochemical data shows the importance of parent material age on the overall delivery of solutes. Observed Ca:Na, HCO₃:Na and Mg:Na ratios suggest crystallinity of the parent material may also play an important role in determining weathering fluxes. From total dissolved solids concentrations and mean annual discharge calculations we calculate chemical weathering yields of (6-106 t km⁻² a⁻¹), which are similar to those previously determined for basalt terrains. Silicate fluxes (3.1-55.4 t km⁻² a⁻¹) and associated CO₂ consumption (190-1575 × 10³ mol km⁻² a⁻¹) determined from our study are among the highest determined to date. The calculated chemical fluxes from our study confirm the weathering potential of andesitic-dacitic terrains and that additional studies of these terrains are warranted.     

Chemical weathering, river geochemistry and atmospheric carbon fluxes from volcanic and ultramafic regions on Luzon Island, the Philippines

We investigated rates of chemical weathering of volcanic and ophiolitic rocks on Luzon Island, the Philippines. Luzon has a tropical climate and is volcanically and tectonically very active, all factors that should enhance chemical weathering. Seventy-five rivers and streams (10 draining ophiolites, 65 draining volcanic bedrock) and two volcanic hot springs were sampled and analyzed for major elements, alkalinity and ⁸⁷Sr/⁸⁶Sr. Cationic fluxes from the volcanic basins are dominated by Ca²⁺ and Mg²⁺ and dissolved silica concentrations are high (500-1900 μM). Silica concentrations in streams draining ophiolites are lower (400-900 μM), and the cationic charge is mostly Mg²⁺. The areally weighted average CO₂ export flux from our study area is 3.89 ± 0.21 × 10⁶ mol/km²/yr, or 5.99 ± 0.64 × 10⁶ mol/km²/yr from ophiolites and 3.58 ± 0.23 × 10⁶ mol/km²/yr from volcanic areas (uncertainty given as ±1 standard error, s.e.). This is ∼6-10 times higher than the current best estimate of areally averaged global CO₂ export by basalt chemical weathering and ∼2-3 times higher than the current best estimate of CO₂ export by basalt chemical weathering in the tropics. Extrapolating our findings to all tropical arcs, we estimate that around one tenth of all atmospheric carbon exported via silicate weathering to the oceans annually is processed in these environments, which amount to ∼1% of the global exorheic drainage area. Chemical weathering of volcanic terranes in the tropics appears to make a disproportionately large impact on the long-term carbon cycle.     

Chemical weathering of a marine terrace chronosequence, Santa Cruz, California. Part II: Solute profiles, gradients and the comparisons of contemporary and long-term weathering rates

The spatial and temporal changes in hydrology and pore water elemental and ⁸⁷Sr/⁸⁶Sr compositions are used to determine contemporary weathering rates in a 65- to 226-kyr-old soil chronosequence formed from granitic sediments deposited on marine terraces along coastal California. Soil moisture, tension and saturation exhibit large seasonal variations in shallow soils in response to a Mediterranean climate. These climate effects are dampened in underlying argillic horizons that progressively developed in older soils, and reached steady-state conditions in unsaturated horizons extending to depths in excess of 15 m. Hydraulic fluxes (q_h), based on Cl mass balances, vary from 0.06 to 0.22 m yr⁻¹, resulting in fluid residence times in the terraces of 10-24 yrs.As expected for a coastal environment, the order of cation abundances in soil pore waters is comparable to sea water, i.e., Na > Mg > Ca > K > Sr, while the anion sequence Cl > NO₃ > HCO₃ > SO₄ reflects modifying effects of nutrient cycling in the grassland vegetation. Net Cl-corrected solute Na, K and Si increase with depth, denoting inputs from feldspar weathering. Solute ⁸⁷Sr/⁸⁶Sr ratios exhibit progressive mixing of sea water-dominated precipitation with inputs from less radiogenic plagioclase. While net Sr and Ca concentrations are anomalously high in shallow soils due to biological cycling, they decline with depth to low and/or negative net concentrations. Ca/Mg, Sr/Mg and ⁸⁷Sr/⁸⁶Sr solute and exchange ratios are similar in all the terraces, denoting active exchange equilibration with selectivities close to unity for both detrital smectite and secondary kaolinite. Large differences in the magnitudes of the pore waters and exchange reservoirs result in short-term buffering of the solute Ca, Sr, and Mg. Such buffering over geologic time scales can not be sustained due to declining inputs from residual plagioclase and smectite, implying periodic resetting of the exchange reservoir such as by past vegetational changes and/or climate.Pore waters approach thermodynamic saturation with respect to albite at depth in the younger terraces, indicating that weathering rates ultimately become transport-limited and dependent on hydrologic flux. Contemporary rates R_solute are estimated from linear Na and Si pore weathering gradients b_solute such that

     

Alteration of As-bearing phases in a small watershed located on a high grade arsenic-geochemical anomaly (French Massif Central)

At a watershed scale, sediments and soil weathering exerts a control on solid and dissolved transport of trace elements in surface waters and it can be considered as a source of pollution. The studied subwatershed (1.5 km²) was located on an As-geochemical anomaly. The studied soil profile showed a significant decrease of As content from 1500 mg kg⁻¹ in the 135–165 cm deepest soil layer to 385 mg kg⁻¹ in the upper 0–5 cm soil layer. Directly in the stream, suspended matter and the <63 μm fraction of bed sediments had As concentrations greater than 400 mg kg⁻¹. In all these solid fractions, the main representative As-bearing phases were determined at two different observation scales: bulk analyses using X-ray absorption structure spectroscopy (XAS) and microanalyses using scanning electron microscope (SEM) and associated electron probe microanalyses (EPMA), as well as micro-Raman spectroscopy and synchrotron-based micro-scanning X-ray diffraction (μSXRD) characterization. Three main As-bearing phases were identified: (i) arsenates (mostly pharmacosiderite), the most concentrated phases As in both the coherent weathered bedrock and the 135–165 cm soil layer but not observed in the river solid fraction, (ii) Fe-oxyhydroxides with in situ As content up to 15.4 wt.% in the deepest soil layer, and (iii) aluminosilicates, the least concentrated As carriers. The mineralogical evolution of As-bearing phases in the soil profile, coupled with the decrease of bulk As content, may be related to pedogenesis processes, suggesting an evolution of arsenates into As-rich Fe-oxyhydroxides. Therefore, weathering and mineralogical evolution of these As-rich phases may release As to surface waters.     

Weathering of the Rio Blanco quartz diorite, Luquillo Mountains, Puerto Rico: Coupling oxidation, dissolution, and fracturing

In the mountainous Rio Icacos watershed in northeastern Puerto Rico, quartz diorite bedrock weathers spheroidally, producing a 0.2-2 m thick zone of partially weathered rock layers (∼2.5 cm thickness each) called rindlets, which form concentric layers around corestones. Spheroidal fracturing has been modeled to occur when a weathering reaction with a positive ΔV of reaction builds up elastic strain energy. The rates of spheroidal fracturing and saprolite formation are therefore controlled by the rate of the weathering reaction.Chemical, petrographic, and spectroscopic evidence demonstrates that biotite oxidation is the most likely fracture-inducing reaction. This reaction occurs with an expansion in d (0 0 1) from 10.0 to 10.5 Å, forming “altered biotite”. Progressive biotite oxidation across the rindlet zone was inferred from thin sections and gradients in K and Fe(II). Using the gradient in Fe(II) and constraints based on cosmogenic age dates, we calculated a biotite oxidation reaction rate of 8.2 × 10⁻¹⁴ mol biotite m⁻² s⁻¹. Biotite oxidation was documented within the bedrock corestone by synchrotron X-ray microprobe fluorescence imaging and XANES. X-ray microprobe images of Fe(II) and Fe(III) at 2 μm resolution revealed that oxidized zones within individual biotite crystals are the first evidence of alteration of the otherwise unaltered corestone.Fluids entering along fractures lead to the dissolution of plagioclase within the rindlet zone. Within 7 cm surrounding the rindlet-saprolite interface, hornblende dissolves to completion at a rate of 6.3 × 10⁻¹³ mol hornblende m⁻² s⁻¹: the fastest reported rate of hornblende weathering in the field. This rate is consistent with laboratory-derived hornblende dissolution rates. By revealing the coupling of these mineral weathering reactions to fracturing and porosity formation we are able to describe the process by which the quartz diorite bedrock disaggregates and forms saprolite. In the corestone, biotite oxidation induces spheroidal fracturing, facilitating the influx of fluids that react with other minerals, dissolving plagioclase and chlorite, creating additional porosity, and eventually dissolving hornblende and precipitating secondary minerals. The thickness of the resultant saprolite is maintained at steady state by a positive feedback between the denudation rate and the weathering advance rate driven by the concentration of pore water O₂ at the bedrock-saprolite interface.     

Pleistocene chemical weathering history of Asian arid and semi-arid regions recorded in loess deposits of China and Tajikistan

Quaternary loess-soil sequences in China and Tajikistan are valuable archives of the chemical weathering history for arid and semi-arid regions of Asia. The development of new proxies independent of grain size are vital to reconstruct the long-term chemical weathering history of eolian deposits. In this study, we analyze major elemental and Rb, Sr, and Ba concentrations of decarbonated residue from representative loess and soil units along a north-south transect on the Chinese Loess Plateau and compare these concentrations among different grain-size fractions. Results show that most of the elemental abundances and ratios vary considerably among different grain-size fractions for both loess and paleosols, indicating transport-driven compositional differentiation of minerals during subaerial transport. However, (CaO + Na₂O + MgO)/TiO₂ ratios show little variation among different size fractions for the loess-soil transect. Loess-soil sequences at Lingtai (northern China) and Chashmanigar (southern Tajikistan) for the past 1.50-1.77 Ma show lower (CaO + Na₂O + MgO)/TiO₂ ratios in soil units than in adjacent loess horizons, in good agreement with greater weathering intensity in soils than in loess units. The (CaO + Na₂O + MgO)/TiO₂ ratio of the decarbonated residue is therefore a reliable proxy for chemical weathering of loess deposits that is independent of grain size. The (CaO + Na₂O+MgO)/TiO₂ ratios of the Lingtai and Chashmanigar sections display a relatively regular oscillation within a narrow range in the early Pleistocene, and a rapid increase in average values and in variance from 0.85-0.6 Ma to the present, indicating lowered chemical weathering intensity in both the dust source regions and the depositional areas. This event may be causally related to the expansion of northern hemisphere ice and/or the regional tectonic uplift of high mountains in Asia since the mid-Pleistocene.     

Lanthanoid behaviour in an acidic landscape

Lanthanoids were studied in a boreal landscape where an abundance of acid sulfate soils and Histosols provide a unique opportunity to increase the understanding of how these metals behave in acidic soils and waters and interact with soil and aqueous organic matter. In the acid sulfate soils lanthanoids are mobile as reflected in high to very high concentrations in soil water and runoff (typically a few mg l⁻¹ but up to 12 mg l⁻¹) and abundant release by several relatively weak extractants (ammonium acetate EDTA, sodium pyrophosphate, hydroxylamine hydrochloride) applied on bulk soil. Normalisation with the lanthanoid pool in the underlying parent materials (sulphide-bearing sediments deposited in brackish-water) and soil water showed that the extensive release/retention in the acidic soil was accompanied by large, and variable, fractionation trends across the lanthanoid series. In low-order streams draining these soils, the lanthanoid concentrations were high and, as indicated by frontal ultrafiltration and geochemical modelling, largely dissolved (<1 kDa) in the form of the species LnSO₄⁺ and Ln³⁺. In other moderately acidic stream waters (pH 4.3-4.6), organic complexation was predicted to be important in the <1 kDa fraction (especially for the heavy lanthanoids) and strongly dominating in the colloidal phase (1 kDa-0.45 μm). Along the main stem of a stream in focus (catchment area of 223 km²), lanthanoid concentrations increased downstream, in particular during high flows, caused by a downstream increase in the proportion of acid sulfate soils which are extensively flushed during wet periods. The geochemical models applied to the colloidal Ln-organic phase were not successful in predicting the measured fractionation patterns.     

Zinc mineral weathering as affected by plant roots

The re-vegetation of soils contaminated by potentially harmful metals is generally considered a suitable option to reduce the metal dispersion in surrounding environments. A continuous flow experiment was conducted to quantitatively assess the effect of Italian ryegrass (Lolium multiflorum Lam.) root activity on the weathering of smithsonite (ZnCO₃), a common Zn mineral. At the end of the experiment (10 days), the total amount of Zn released by smithsonite was increased by a factor of 2.25 in the presence of plants. This increase was due not only to plant uptake but also to the enhancement of the Zn release into leachates. The rate of Zn release from smithsonite to leachates was 2.9 × 10⁻⁴ μg g⁻¹ s⁻¹ and 1.5 × 10⁻⁴ μg g⁻¹ s⁻¹ in the presence and the absence of plants, respectively. The strong correlation (r = 0.95; p < 0.001) between concentrations of Zn and dissolved organic C (DOC) produced by the rhizosphere activity in leachates indicated that organic root exudates and secretions were closely involved in smithsonite weathering. Although the results are derived from laboratory study, and further in situ investigations over the long term are needed, they clearly highlighted that plants can enhance metal release into the environment by accelerating mineral weathering. Therefore, it is suggested that the ability of plants to alter metal phases in soils should be further taken into account when re-vegetation strategies are proposed for the rehabilitation of metal-polluted soils.     

Major ion chemistry of the Yarlung Tsangpo-Brahmaputra river: Chemical weathering, erosion, and CO2 consumption in the southern Tibetan plateau and eastern syntaxis of the Himalaya

The Yarlung Tsangpo-Brahmaputra river drains a large portion of the Himalaya and southern Tibetan plateau, including the eastern Himalayan syntaxis, one of the most tectonically active regions on the globe. We measured the solute chemistry of 161 streams and major tributaries of the Tsangpo-Brahmaputra to examine the effect of tectonic, climatic, and geologic factors on chemical weathering rates. Specifically, we quantify chemical weathering fluxes and CO₂ consumption by silicate weathering in southern Tibet and the eastern syntaxis of the Himalaya, examine the major chemical weathering reactions in the tributaries of the Tsangpo-Brahmaputra, and determine the total weathering flux from carbonate and silicate weathering processes in this region. We show that high precipitation, rapid tectonic uplift, steep channel slopes, and high stream power generate high rates of chemical weathering in the eastern syntaxis. The total dissolved solids (TDS) flux from the this area is greater than 520 tons km⁻² yr⁻¹ and the silicate cation flux more than 34 tons km⁻² yr⁻¹. In total, chemical weathering in this area consumes 15.2 × 10⁵ mol CO₂ km⁻² yr⁻¹, which is twice the Brahmaputra average. These data show that 15-20% of the total CO₂ consumption by silicate weathering in the Brahmaputra catchment is derived from only 4% of the total land area of the basin. Hot springs and evaporite weathering provide significant contributions to dissolved Na⁺ and Cl⁻ fluxes throughout southern Tibet, comprising more than 50% of all Na⁺ in some stream systems. Carbonate weathering generates 80-90% of all dissolved Ca²⁺ and Mg²⁺ cations in much of the Yarlung Tsangpo catchment.     

Confined pyrolysis of Tertiary lacustrine source rocks in the Western Qaidam Basin,Northwest China: Implications for generative potential and oil maturity evaluation

The parameter S₁ + S₂ (genetic potential) of Rock-Eval analysis is widely used as an evaluation of the genetic potential for the source rocks. Oligocene–Miocene saline lacustrine source rocks in the western Qaidam basin have low total organic C contents (TOC), most around 0.5% with a few exceptions >1.0%. Mineral matrix effects are substantial for source rocks with low TOC, resulting in relatively low S₁ and S₂ peaks. Based on the results of confined pyrolyses (sealed Au capsules) on 6 Oligocene–Miocene source rocks from the western Qaidam basin, with TOC ranging between 0.48% and 2.22%, the relationship between the S₁ + S₂ parameter and the maximum amount of extracted bitumen or saturated and aromatic hydrocarbons (SA) after the confined pyrolysis has been established as follows: bitumen (mg/g rock) = 1.4924 × (S₁ + S₂) + 0.3201 (r = 0.987), or SA (saturates + aromatics) (mg/g rock) = 0.7083 × (S₁ + S₂) + 0.4045 (r = 0.992). Based on these formulas, the amounts of hydrocarbons generated from source rocks can be reasonably estimated. The typical crude oils with low biomarker maturities in this region appear substantially different to the pyrolysates of these six rocks at 180–300 °C but comparable to the pyrolysates at 320 °C and higher temperatures based on molecular parameters. This result, in combination with the physical and gross compositions of the crude oils, suggests that the majority of these crude oils were generated from the source rocks during the main oil-generative stage, possibly at a maturity higher than R_o 0.74%.