| 装配式剪力墙竖向钢筋套筒注浆连接试验研究 |
| |
| 引用本文： | 任宏伟,严珊,王思远.装配式剪力墙竖向钢筋套筒注浆连接试验研究[J].世界地震工程,2020,0(1):093-100. |
| |
| 作者姓名： | 任宏伟 严珊 王思远 |
| |
| 作者单位： | 华北理工大学 建筑工程学院,河北 唐山063210;河北省地震工程研究中心,河北 唐山063210;华北理工大学 建筑工程学院,河北 唐山063210 |
| |
| 基金项目： | 国家自然科学基金项目(51278164);河北省科技计划项目(16211504);河北省高等学校科学技术研究青年基金项目(QN2018160) |
| |
| 摘 要： | 通过高应力反复拉压试验，研究了18个钢筋套筒注浆连接试件的破坏形态和套筒的应变，并对钢筋套筒注浆连接试件的屈服强度、极限强度和钢筋接头的等级进行了分析。结果表明:连接试件发生钢筋拉断和粘结破坏2种破坏形态，其屈服强度和极限强度均与钢筋母材强度相接近，另外钢筋连接采用套筒注浆的方式施工便捷和合理可靠，并通过对试验数据分析，给出了直径为12mm和14mm的HRB400钢筋采用此套筒注浆方式连接时套筒参数的建议值，为钢筋套筒注浆连接在装配式剪力墙中的设计和应用研究提供了一定的参考借鉴。
|
| 关 键 词： | 钢筋连接 套筒注浆 装配式剪力墙 试验研究 |
Experimental study on grouting connection of vertical reinforcement sleeve of fabricated shear wall |
| |
| REN Hongwei,' target="_blank" rel="external">,YAN Shan,' target="_blank" rel="external">,WANG Singyuan.Experimental study on grouting connection of vertical reinforcement sleeve of fabricated shear wall[J].World Information On Earthquake Engineering,2020,0(1):093-100. |
| |
| Authors: | REN Hongwei " target="_blank">' target="_blank" rel="external"> YAN Shan " target="_blank">' target="_blank" rel="external"> WANG Singyuan |
| |
| Affiliation: | 1. North China University of Science and Technology, Tangshan 063210, China;2. Earthquake Engineering Research Center of Hebei, Tangshan 063210, China |
| |
| Abstract: | The failure modes and sleeve strains of 18 steel bar sleeve grouting connection specimens were studied by high-stress repeated tension and compression tests.The yield strength,ultimate strength and grade of the steel bar joint of these grouting connection specimens were analyzed.The results show that the yield strength and ultimate strength of the joints are close to the base material strength of the steel bars.The sleeve grouting method is convenient,reasonable and reliable for the construction of the joints.Through the analysis of the test data,the recommended parameters of the HRB400 steel bars with diameters of 12 mm and 14 mm are given for the sleeve grouting method,which provides a certain reference for the design and application of the steel bar sleeve grouting connection in assembling shear walls. |
| |
| Keywords: | reinforcing bar connection sleeve grouting fabricated shear wall experimental research |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《世界地震工程》浏览原始摘要信息 |
|
点击此处可从《世界地震工程》下载全文 |
