首页 | 本学科首页   官方微博 | 高级检索  
     

时钟不准情形地震精确定位研究 以2011年1月19日安庆地震序列为例
引用本文:包丰, 倪四道, 赵建和, 谢军, 陈伟文, 曾祥方. 2013: 时钟不准情形地震精确定位研究 以2011年1月19日安庆地震序列为例. 地震学报, 35(2): 160-172. DOI: 10.3969/j.issn.0253-3782.2013.02.003
作者姓名:包丰  倪四道  赵建和  谢军  陈伟文  曾祥方
作者单位:1.中国合肥 230026 中国科学技术大学地球和空间科学学院蒙城地球物理国家野外科学观测研究站;2.中国武汉 430077 中国科学院测量与地球物理研究所大地测量与地球动力学国家重点实验室;3.中国合肥 230031 安徽省地震局
基金项目:国家自然科学基金(NSFC40821160549,NSFC41074032);中国科学院知识创新工程(KZCX2-YW-116-01);地震行业基金(200808078)共同资助
摘    要:通过余震序列的精确定位可以较为准确地刻画主震破裂区的时空变化规律. 为了减小仪器时钟误差对地震定位精度的影响, 本文基于2011年1月19日安庆地震流动台站的S-P到时差, 通过主事件和双差地震定位法得到较为准确的主震位置和余震序列时空分布, 并评估了仪器时钟误差; 又通过对sPL近震深度震相的分析, 得到了余震序列较为可靠的深度分布. 结果表明, 安庆地震发生在宿松—枞阳断裂带附近, 余震序列大体近水平分布在5 km深度, 呈长1.5 km、 宽1 km、 高0.3 km的薄板状展布; 从时空分布来看, 随着时间的推移余震序列似乎有往北东方向扩展的趋势. 研究表明, 基于S-P到时差的定位方法可以有效消除时钟不准确带来的影响, 为中小地震和余震序列活动性的研究提供可靠的定位结果.

关 键 词:安庆地震  双差地震定位法  时钟误差  sPL深度震相  S-P到时差
收稿时间:2012-02-15
修稿时间:2012-08-03

Anqing earthquake; double-difference earthquake location algorithm; instrumental clock error; sPL; S-P arrival time difference
Bao Feng, Ni Sidao, Zhao Jianhe, Xie Jun, Chen Weiwen, Zeng Xiangfang. 2013: Anqing earthquake; double-difference earthquake location algorithm; instrumental clock error; sPL; S-P arrival time difference. Acta Seismologica Sinica, 35(2): 160-172. DOI: 10.3969/j.issn.0253-3782.2013.02.003
Authors:Bao Feng  Ni Sidao  Zhao Jianhe  Xie Jun  Chen Weiwen  Zeng Xiangfang
Affiliation:1.Mengcheng National Geophysical Observatory, School of Earth and Space Sciences, University of Science and Technology of China, Hefei 230026, China;2.State Key Laboratory of Geodesy and Earth’s Dynamics, Institute of Geodesy and Geophysics, Chinese Academy of Sciences, Wuhan 430077, China;3.Earthquake Administration of Anhui Province, Hefei 230031, China
Abstract:Accurate locations of aftershocks are helpful for understanding rupture process of the main shock. In order to suppress the impact of instrumental clock error, the arrival-time differences between S and P by the temporary seismic array installed after the 19 January 2011 Anqing earthquake were used to reconstruct the travel-time data of P and S and more accurate locations of the main shock and aftershocks were obtained by using master event and double-difference earthquake location algorithm; an algorithm was proposed to estimate the range of clock error; more reliable depth distribution of the aftershocks was also obtained via analysing sPL, a depth phase at near epicentral distance. The result shows that the Anqing earthquake occurred near Susong--Zongyang fault zone, and the aftershocks concentrated nearly horizontally in the depth range of about 5 km, spreading in the shape of a thin slab around 1.5 km long, 1.0 km wide and 0.3 km thick; the sequence tended to spread northeastward as time went on. The study suggests that earthquake location based on S--P arrival-time difference method can effectively eliminate the influence of clock error, providing reliable results for moderate, minor earthquakes and aftershocks. 
Keywords:Anqing earthquake  double-difference earthquake location algorithm  instrumental clock error  sPL  S-P arrival time difference
本文献已被 CNKI 等数据库收录!
点击此处可从《地震学报》浏览原始摘要信息
点击此处可从《地震学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号