Extreme behavior in a triple friction pendulum isolated frame |
| |
| Authors: | Tracy C Becker Yu Bao Stephen A Mahin |
| |
| Affiliation: | 1. Department of Civil Engineering, McMaster University, Hamilton, Canada;2. Department of Civil and Environmental Engineering, University of California, Berkeley, CA, USA |
| |
| Abstract: | While isolation can provide significantly enhanced performance compared to fixed‐base counter parts in design level or even maximum considered level earthquakes, there is still uncertainty over the performance of isolation systems in extreme events. Researchers have looked at component level stability of rubber bearings and on the effect of moat impact on behavior of structures isolated on general bilinear isolators. However, testing of triple friction pendulum (TFP) sliding bearings has not been done dynamically or incorporated into a building system. Here, one‐third scale laboratory tests were conducted to on a 2‐story 2‐bay TFP‐isolated structure. Input motions were increasingly scaled until failure occurred at the isolation level. As the superstructure was designed with a yield force equivalent to the force of the bearing just at their ultimate displacement capacity, there was minimal yielding. A numerical model is presented to simulate the isolated building up to and including bearing failure. Forces transferred to the superstructure in extreme motions are examined using both experimental and numerical data. Additionally, the effect of the hardening stage of the TFP bearing is evaluated using the numerical model, finding slight benefits. |
| |
| Keywords: | extreme events failure friction pendulum impact isolation shake table |
|
|
